Commit | Line | Data |
---|---|---|
a30d46c0 DB |
1 | /* |
2 | * twl4030-irq.c - TWL4030/TPS659x0 irq support | |
3 | * | |
4 | * Copyright (C) 2005-2006 Texas Instruments, Inc. | |
5 | * | |
6 | * Modifications to defer interrupt handling to a kernel thread: | |
7 | * Copyright (C) 2006 MontaVista Software, Inc. | |
8 | * | |
9 | * Based on tlv320aic23.c: | |
10 | * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> | |
11 | * | |
12 | * Code cleanup and modifications to IRQ handler. | |
13 | * by syed khasim <x0khasim@ti.com> | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, write to the Free Software | |
27 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
28 | */ | |
29 | ||
30 | #include <linux/init.h> | |
31 | #include <linux/interrupt.h> | |
32 | #include <linux/irq.h> | |
33 | #include <linux/kthread.h> | |
34 | ||
35 | #include <linux/i2c/twl4030.h> | |
36 | ||
37 | ||
38 | /* | |
39 | * TWL4030 IRQ handling has two stages in hardware, and thus in software. | |
40 | * The Primary Interrupt Handler (PIH) stage exposes status bits saying | |
41 | * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. | |
42 | * SIH modules are more traditional IRQ components, which support per-IRQ | |
43 | * enable/disable and trigger controls; they do most of the work. | |
44 | * | |
45 | * These chips are designed to support IRQ handling from two different | |
46 | * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status | |
47 | * and mask registers in the PIH and SIH modules. | |
48 | * | |
49 | * We set up IRQs starting at a platform-specified base, always starting | |
50 | * with PIH and the SIH for PWR_INT and then usually adding GPIO: | |
51 | * base + 0 .. base + 7 PIH | |
52 | * base + 8 .. base + 15 SIH for PWR_INT | |
53 | * base + 16 .. base + 33 SIH for GPIO | |
54 | */ | |
55 | ||
56 | /* PIH register offsets */ | |
57 | #define REG_PIH_ISR_P1 0x01 | |
58 | #define REG_PIH_ISR_P2 0x02 | |
59 | #define REG_PIH_SIR 0x03 /* for testing */ | |
60 | ||
61 | ||
62 | /* Linux could (eventually) use either IRQ line */ | |
63 | static int irq_line; | |
64 | ||
65 | struct sih { | |
66 | char name[8]; | |
67 | u8 module; /* module id */ | |
68 | u8 control_offset; /* for SIH_CTRL */ | |
69 | bool set_cor; | |
70 | ||
71 | u8 bits; /* valid in isr/imr */ | |
72 | u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ | |
73 | ||
74 | u8 edr_offset; | |
75 | u8 bytes_edr; /* bytelen of EDR */ | |
76 | ||
77 | /* SIR ignored -- set interrupt, for testing only */ | |
78 | struct irq_data { | |
79 | u8 isr_offset; | |
80 | u8 imr_offset; | |
81 | } mask[2]; | |
82 | /* + 2 bytes padding */ | |
83 | }; | |
84 | ||
85 | #define SIH_INITIALIZER(modname, nbits) \ | |
86 | .module = TWL4030_MODULE_ ## modname, \ | |
87 | .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ | |
88 | .bits = nbits, \ | |
89 | .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ | |
90 | .edr_offset = TWL4030_ ## modname ## _EDR, \ | |
91 | .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ | |
92 | .mask = { { \ | |
93 | .isr_offset = TWL4030_ ## modname ## _ISR1, \ | |
94 | .imr_offset = TWL4030_ ## modname ## _IMR1, \ | |
95 | }, \ | |
96 | { \ | |
97 | .isr_offset = TWL4030_ ## modname ## _ISR2, \ | |
98 | .imr_offset = TWL4030_ ## modname ## _IMR2, \ | |
99 | }, }, | |
100 | ||
101 | /* register naming policies are inconsistent ... */ | |
102 | #define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 | |
103 | #define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD | |
104 | #define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT | |
105 | ||
106 | ||
107 | /* Order in this table matches order in PIH_ISR. That is, | |
108 | * BIT(n) in PIH_ISR is sih_modules[n]. | |
109 | */ | |
110 | static const struct sih sih_modules[6] = { | |
111 | [0] = { | |
112 | .name = "gpio", | |
113 | .module = TWL4030_MODULE_GPIO, | |
114 | .control_offset = REG_GPIO_SIH_CTRL, | |
115 | .set_cor = true, | |
116 | .bits = TWL4030_GPIO_MAX, | |
117 | .bytes_ixr = 3, | |
118 | /* Note: *all* of these IRQs default to no-trigger */ | |
119 | .edr_offset = REG_GPIO_EDR1, | |
120 | .bytes_edr = 5, | |
121 | .mask = { { | |
122 | .isr_offset = REG_GPIO_ISR1A, | |
123 | .imr_offset = REG_GPIO_IMR1A, | |
124 | }, { | |
125 | .isr_offset = REG_GPIO_ISR1B, | |
126 | .imr_offset = REG_GPIO_IMR1B, | |
127 | }, }, | |
128 | }, | |
129 | [1] = { | |
130 | .name = "keypad", | |
131 | .set_cor = true, | |
132 | SIH_INITIALIZER(KEYPAD_KEYP, 4) | |
133 | }, | |
134 | [2] = { | |
135 | .name = "bci", | |
136 | .module = TWL4030_MODULE_INTERRUPTS, | |
137 | .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, | |
138 | .bits = 12, | |
139 | .bytes_ixr = 2, | |
140 | .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, | |
141 | /* Note: most of these IRQs default to no-trigger */ | |
142 | .bytes_edr = 3, | |
143 | .mask = { { | |
144 | .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, | |
145 | .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, | |
146 | }, { | |
147 | .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, | |
148 | .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, | |
149 | }, }, | |
150 | }, | |
151 | [3] = { | |
152 | .name = "madc", | |
153 | SIH_INITIALIZER(MADC, 4) | |
154 | }, | |
155 | [4] = { | |
156 | /* USB doesn't use the same SIH organization */ | |
157 | .name = "usb", | |
158 | }, | |
159 | [5] = { | |
160 | .name = "power", | |
161 | .set_cor = true, | |
162 | SIH_INITIALIZER(INT_PWR, 8) | |
163 | }, | |
164 | /* there are no SIH modules #6 or #7 ... */ | |
165 | }; | |
166 | ||
167 | #undef TWL4030_MODULE_KEYPAD_KEYP | |
168 | #undef TWL4030_MODULE_INT_PWR | |
169 | #undef TWL4030_INT_PWR_EDR | |
170 | ||
171 | /*----------------------------------------------------------------------*/ | |
172 | ||
173 | static unsigned twl4030_irq_base; | |
174 | ||
175 | static struct completion irq_event; | |
176 | ||
177 | /* | |
178 | * This thread processes interrupts reported by the Primary Interrupt Handler. | |
179 | */ | |
180 | static int twl4030_irq_thread(void *data) | |
181 | { | |
182 | long irq = (long)data; | |
183 | irq_desc_t *desc = irq_desc + irq; | |
184 | static unsigned i2c_errors; | |
185 | const static unsigned max_i2c_errors = 100; | |
186 | ||
187 | current->flags |= PF_NOFREEZE; | |
188 | ||
189 | while (!kthread_should_stop()) { | |
190 | int ret; | |
191 | int module_irq; | |
192 | u8 pih_isr; | |
193 | ||
194 | /* Wait for IRQ, then read PIH irq status (also blocking) */ | |
195 | wait_for_completion_interruptible(&irq_event); | |
196 | ||
197 | ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, | |
198 | REG_PIH_ISR_P1); | |
199 | if (ret) { | |
200 | pr_warning("twl4030: I2C error %d reading PIH ISR\n", | |
201 | ret); | |
202 | if (++i2c_errors >= max_i2c_errors) { | |
203 | printk(KERN_ERR "Maximum I2C error count" | |
204 | " exceeded. Terminating %s.\n", | |
205 | __func__); | |
206 | break; | |
207 | } | |
208 | complete(&irq_event); | |
209 | continue; | |
210 | } | |
211 | ||
212 | /* these handlers deal with the relevant SIH irq status */ | |
213 | local_irq_disable(); | |
214 | for (module_irq = twl4030_irq_base; | |
215 | pih_isr; | |
216 | pih_isr >>= 1, module_irq++) { | |
217 | if (pih_isr & 0x1) { | |
218 | irq_desc_t *d = irq_desc + module_irq; | |
219 | ||
220 | /* These can't be masked ... always warn | |
221 | * if we get any surprises. | |
222 | */ | |
223 | if (d->status & IRQ_DISABLED) | |
224 | note_interrupt(module_irq, d, | |
225 | IRQ_NONE); | |
226 | else | |
227 | d->handle_irq(module_irq, d); | |
228 | } | |
229 | } | |
230 | local_irq_enable(); | |
231 | ||
232 | desc->chip->unmask(irq); | |
233 | } | |
234 | ||
235 | return 0; | |
236 | } | |
237 | ||
238 | /* | |
239 | * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. | |
240 | * This is a chained interrupt, so there is no desc->action method for it. | |
241 | * Now we need to query the interrupt controller in the twl4030 to determine | |
242 | * which module is generating the interrupt request. However, we can't do i2c | |
243 | * transactions in interrupt context, so we must defer that work to a kernel | |
244 | * thread. All we do here is acknowledge and mask the interrupt and wakeup | |
245 | * the kernel thread. | |
246 | */ | |
247 | static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc) | |
248 | { | |
249 | /* Acknowledge, clear *AND* mask the interrupt... */ | |
250 | desc->chip->ack(irq); | |
251 | complete(&irq_event); | |
252 | } | |
253 | ||
254 | static struct task_struct *start_twl4030_irq_thread(long irq) | |
255 | { | |
256 | struct task_struct *thread; | |
257 | ||
258 | init_completion(&irq_event); | |
259 | thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); | |
260 | if (!thread) | |
261 | pr_err("twl4030: could not create irq %ld thread!\n", irq); | |
262 | ||
263 | return thread; | |
264 | } | |
265 | ||
266 | /*----------------------------------------------------------------------*/ | |
267 | ||
268 | /* | |
269 | * twl4030_init_sih_modules() ... start from a known state where no | |
270 | * IRQs will be coming in, and where we can quickly enable them then | |
271 | * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. | |
272 | * | |
273 | * NOTE: we don't touch EDR registers here; they stay with hardware | |
274 | * defaults or whatever the last value was. Note that when both EDR | |
275 | * bits for an IRQ are clear, that's as if its IMR bit is set... | |
276 | */ | |
277 | static int twl4030_init_sih_modules(unsigned line) | |
278 | { | |
279 | const struct sih *sih; | |
280 | u8 buf[4]; | |
281 | int i; | |
282 | int status; | |
283 | ||
284 | /* line 0 == int1_n signal; line 1 == int2_n signal */ | |
285 | if (line > 1) | |
286 | return -EINVAL; | |
287 | ||
288 | irq_line = line; | |
289 | ||
290 | /* disable all interrupts on our line */ | |
291 | memset(buf, 0xff, sizeof buf); | |
292 | sih = sih_modules; | |
293 | for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { | |
294 | ||
295 | /* skip USB -- it's funky */ | |
296 | if (!sih->bytes_ixr) | |
297 | continue; | |
298 | ||
299 | status = twl4030_i2c_write(sih->module, buf, | |
300 | sih->mask[line].imr_offset, sih->bytes_ixr); | |
301 | if (status < 0) | |
302 | pr_err("twl4030: err %d initializing %s %s\n", | |
303 | status, sih->name, "IMR"); | |
304 | ||
305 | /* Maybe disable "exclusive" mode; buffer second pending irq; | |
306 | * set Clear-On-Read (COR) bit. | |
307 | * | |
308 | * NOTE that sometimes COR polarity is documented as being | |
309 | * inverted: for MADC and BCI, COR=1 means "clear on write". | |
310 | * And for PWR_INT it's not documented... | |
311 | */ | |
312 | if (sih->set_cor) { | |
313 | status = twl4030_i2c_write_u8(sih->module, | |
314 | TWL4030_SIH_CTRL_COR_MASK, | |
315 | sih->control_offset); | |
316 | if (status < 0) | |
317 | pr_err("twl4030: err %d initializing %s %s\n", | |
318 | status, sih->name, "SIH_CTRL"); | |
319 | } | |
320 | } | |
321 | ||
322 | sih = sih_modules; | |
323 | for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { | |
324 | u8 rxbuf[4]; | |
325 | int j; | |
326 | ||
327 | /* skip USB */ | |
328 | if (!sih->bytes_ixr) | |
329 | continue; | |
330 | ||
331 | /* Clear pending interrupt status. Either the read was | |
332 | * enough, or we need to write those bits. Repeat, in | |
333 | * case an IRQ is pending (PENDDIS=0) ... that's not | |
334 | * uncommon with PWR_INT.PWRON. | |
335 | */ | |
336 | for (j = 0; j < 2; j++) { | |
337 | status = twl4030_i2c_read(sih->module, rxbuf, | |
338 | sih->mask[line].isr_offset, sih->bytes_ixr); | |
339 | if (status < 0) | |
340 | pr_err("twl4030: err %d initializing %s %s\n", | |
341 | status, sih->name, "ISR"); | |
342 | ||
343 | if (!sih->set_cor) | |
344 | status = twl4030_i2c_write(sih->module, buf, | |
345 | sih->mask[line].isr_offset, | |
346 | sih->bytes_ixr); | |
347 | /* else COR=1 means read sufficed. | |
348 | * (for most SIH modules...) | |
349 | */ | |
350 | } | |
351 | } | |
352 | ||
353 | return 0; | |
354 | } | |
355 | ||
356 | static inline void activate_irq(int irq) | |
357 | { | |
358 | #ifdef CONFIG_ARM | |
359 | /* ARM requires an extra step to clear IRQ_NOREQUEST, which it | |
360 | * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. | |
361 | */ | |
362 | set_irq_flags(irq, IRQF_VALID); | |
363 | #else | |
364 | /* same effect on other architectures */ | |
365 | set_irq_noprobe(irq); | |
366 | #endif | |
367 | } | |
368 | ||
369 | /*----------------------------------------------------------------------*/ | |
370 | ||
371 | static DEFINE_SPINLOCK(sih_agent_lock); | |
372 | ||
373 | static struct workqueue_struct *wq; | |
374 | ||
375 | struct sih_agent { | |
376 | int irq_base; | |
377 | const struct sih *sih; | |
378 | ||
379 | u32 imr; | |
380 | bool imr_change_pending; | |
381 | struct work_struct mask_work; | |
382 | ||
383 | u32 edge_change; | |
384 | struct work_struct edge_work; | |
385 | }; | |
386 | ||
387 | static void twl4030_sih_do_mask(struct work_struct *work) | |
388 | { | |
389 | struct sih_agent *agent; | |
390 | const struct sih *sih; | |
391 | union { | |
392 | u8 bytes[4]; | |
393 | u32 word; | |
394 | } imr; | |
395 | int status; | |
396 | ||
397 | agent = container_of(work, struct sih_agent, mask_work); | |
398 | ||
399 | /* see what work we have */ | |
400 | spin_lock_irq(&sih_agent_lock); | |
401 | if (agent->imr_change_pending) { | |
402 | sih = agent->sih; | |
403 | /* byte[0] gets overwritten as we write ... */ | |
404 | imr.word = cpu_to_le32(agent->imr << 8); | |
405 | agent->imr_change_pending = false; | |
406 | } else | |
407 | sih = NULL; | |
408 | spin_unlock_irq(&sih_agent_lock); | |
409 | if (!sih) | |
410 | return; | |
411 | ||
412 | /* write the whole mask ... simpler than subsetting it */ | |
413 | status = twl4030_i2c_write(sih->module, imr.bytes, | |
414 | sih->mask[irq_line].imr_offset, sih->bytes_ixr); | |
415 | if (status) | |
416 | pr_err("twl4030: %s, %s --> %d\n", __func__, | |
417 | "write", status); | |
418 | } | |
419 | ||
420 | static void twl4030_sih_do_edge(struct work_struct *work) | |
421 | { | |
422 | struct sih_agent *agent; | |
423 | const struct sih *sih; | |
424 | u8 bytes[6]; | |
425 | u32 edge_change; | |
426 | int status; | |
427 | ||
428 | agent = container_of(work, struct sih_agent, edge_work); | |
429 | ||
430 | /* see what work we have */ | |
431 | spin_lock_irq(&sih_agent_lock); | |
432 | edge_change = agent->edge_change; | |
433 | agent->edge_change = 0;; | |
434 | sih = edge_change ? agent->sih : NULL; | |
435 | spin_unlock_irq(&sih_agent_lock); | |
436 | if (!sih) | |
437 | return; | |
438 | ||
439 | /* Read, reserving first byte for write scratch. Yes, this | |
440 | * could be cached for some speedup ... but be careful about | |
441 | * any processor on the other IRQ line, EDR registers are | |
442 | * shared. | |
443 | */ | |
444 | status = twl4030_i2c_read(sih->module, bytes + 1, | |
445 | sih->edr_offset, sih->bytes_edr); | |
446 | if (status) { | |
447 | pr_err("twl4030: %s, %s --> %d\n", __func__, | |
448 | "read", status); | |
449 | return; | |
450 | } | |
451 | ||
452 | /* Modify only the bits we know must change */ | |
453 | while (edge_change) { | |
454 | int i = fls(edge_change) - 1; | |
455 | struct irq_desc *d = irq_desc + i + agent->irq_base; | |
456 | int byte = 1 + (i >> 2); | |
457 | int off = (i & 0x3) * 2; | |
458 | ||
459 | bytes[byte] &= ~(0x03 << off); | |
460 | ||
461 | spin_lock_irq(&d->lock); | |
462 | if (d->status & IRQ_TYPE_EDGE_RISING) | |
463 | bytes[byte] |= BIT(off + 1); | |
464 | if (d->status & IRQ_TYPE_EDGE_FALLING) | |
465 | bytes[byte] |= BIT(off + 0); | |
466 | spin_unlock_irq(&d->lock); | |
467 | ||
468 | edge_change &= ~BIT(i); | |
469 | } | |
470 | ||
471 | /* Write */ | |
472 | status = twl4030_i2c_write(sih->module, bytes, | |
473 | sih->edr_offset, sih->bytes_edr); | |
474 | if (status) | |
475 | pr_err("twl4030: %s, %s --> %d\n", __func__, | |
476 | "write", status); | |
477 | } | |
478 | ||
479 | /*----------------------------------------------------------------------*/ | |
480 | ||
481 | /* | |
482 | * All irq_chip methods get issued from code holding irq_desc[irq].lock, | |
483 | * which can't perform the underlying I2C operations (because they sleep). | |
484 | * So we must hand them off to a thread (workqueue) and cope with asynch | |
485 | * completion, potentially including some re-ordering, of these requests. | |
486 | */ | |
487 | ||
488 | static void twl4030_sih_mask(unsigned irq) | |
489 | { | |
490 | struct sih_agent *sih = get_irq_chip_data(irq); | |
491 | unsigned long flags; | |
492 | ||
493 | spin_lock_irqsave(&sih_agent_lock, flags); | |
494 | sih->imr |= BIT(irq - sih->irq_base); | |
495 | sih->imr_change_pending = true; | |
496 | queue_work(wq, &sih->mask_work); | |
497 | spin_unlock_irqrestore(&sih_agent_lock, flags); | |
498 | } | |
499 | ||
500 | static void twl4030_sih_unmask(unsigned irq) | |
501 | { | |
502 | struct sih_agent *sih = get_irq_chip_data(irq); | |
503 | unsigned long flags; | |
504 | ||
505 | spin_lock_irqsave(&sih_agent_lock, flags); | |
506 | sih->imr &= ~BIT(irq - sih->irq_base); | |
507 | sih->imr_change_pending = true; | |
508 | queue_work(wq, &sih->mask_work); | |
509 | spin_unlock_irqrestore(&sih_agent_lock, flags); | |
510 | } | |
511 | ||
512 | static int twl4030_sih_set_type(unsigned irq, unsigned trigger) | |
513 | { | |
514 | struct sih_agent *sih = get_irq_chip_data(irq); | |
515 | struct irq_desc *desc = irq_desc + irq; | |
516 | unsigned long flags; | |
517 | ||
518 | if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) | |
519 | return -EINVAL; | |
520 | ||
521 | spin_lock_irqsave(&sih_agent_lock, flags); | |
522 | if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) { | |
523 | desc->status &= ~IRQ_TYPE_SENSE_MASK; | |
524 | desc->status |= trigger; | |
525 | sih->edge_change |= BIT(irq - sih->irq_base); | |
526 | queue_work(wq, &sih->edge_work); | |
527 | } | |
528 | spin_unlock_irqrestore(&sih_agent_lock, flags); | |
529 | return 0; | |
530 | } | |
531 | ||
532 | static struct irq_chip twl4030_sih_irq_chip = { | |
533 | .name = "twl4030", | |
534 | .mask = twl4030_sih_mask, | |
535 | .unmask = twl4030_sih_unmask, | |
536 | .set_type = twl4030_sih_set_type, | |
537 | }; | |
538 | ||
539 | /*----------------------------------------------------------------------*/ | |
540 | ||
541 | static inline int sih_read_isr(const struct sih *sih) | |
542 | { | |
543 | int status; | |
544 | union { | |
545 | u8 bytes[4]; | |
546 | u32 word; | |
547 | } isr; | |
548 | ||
549 | /* FIXME need retry-on-error ... */ | |
550 | ||
551 | isr.word = 0; | |
552 | status = twl4030_i2c_read(sih->module, isr.bytes, | |
553 | sih->mask[irq_line].isr_offset, sih->bytes_ixr); | |
554 | ||
555 | return (status < 0) ? status : le32_to_cpu(isr.word); | |
556 | } | |
557 | ||
558 | /* | |
559 | * Generic handler for SIH interrupts ... we "know" this is called | |
560 | * in task context, with IRQs enabled. | |
561 | */ | |
562 | static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) | |
563 | { | |
564 | struct sih_agent *agent = get_irq_data(irq); | |
565 | const struct sih *sih = agent->sih; | |
566 | int isr; | |
567 | ||
568 | /* reading ISR acks the IRQs, using clear-on-read mode */ | |
569 | local_irq_enable(); | |
570 | isr = sih_read_isr(sih); | |
571 | local_irq_disable(); | |
572 | ||
573 | if (isr < 0) { | |
574 | pr_err("twl4030: %s SIH, read ISR error %d\n", | |
575 | sih->name, isr); | |
576 | /* REVISIT: recover; eventually mask it all, etc */ | |
577 | return; | |
578 | } | |
579 | ||
580 | while (isr) { | |
581 | irq = fls(isr); | |
582 | irq--; | |
583 | isr &= ~BIT(irq); | |
584 | ||
585 | if (irq < sih->bits) | |
586 | generic_handle_irq(agent->irq_base + irq); | |
587 | else | |
588 | pr_err("twl4030: %s SIH, invalid ISR bit %d\n", | |
589 | sih->name, irq); | |
590 | } | |
591 | } | |
592 | ||
593 | static unsigned twl4030_irq_next; | |
594 | ||
595 | /* returns the first IRQ used by this SIH bank, | |
596 | * or negative errno | |
597 | */ | |
598 | int twl4030_sih_setup(int module) | |
599 | { | |
600 | int sih_mod; | |
601 | const struct sih *sih = NULL; | |
602 | struct sih_agent *agent; | |
603 | int i, irq; | |
604 | int status = -EINVAL; | |
605 | unsigned irq_base = twl4030_irq_next; | |
606 | ||
607 | /* only support modules with standard clear-on-read for now */ | |
608 | for (sih_mod = 0, sih = sih_modules; | |
609 | sih_mod < ARRAY_SIZE(sih_modules); | |
610 | sih_mod++, sih++) { | |
611 | if (sih->module == module && sih->set_cor) { | |
612 | if (!WARN((irq_base + sih->bits) > NR_IRQS, | |
613 | "irq %d for %s too big\n", | |
614 | irq_base + sih->bits, | |
615 | sih->name)) | |
616 | status = 0; | |
617 | break; | |
618 | } | |
619 | } | |
620 | if (status < 0) | |
621 | return status; | |
622 | ||
623 | agent = kzalloc(sizeof *agent, GFP_KERNEL); | |
624 | if (!agent) | |
625 | return -ENOMEM; | |
626 | ||
627 | status = 0; | |
628 | ||
629 | agent->irq_base = irq_base; | |
630 | agent->sih = sih; | |
631 | agent->imr = ~0; | |
632 | INIT_WORK(&agent->mask_work, twl4030_sih_do_mask); | |
633 | INIT_WORK(&agent->edge_work, twl4030_sih_do_edge); | |
634 | ||
635 | for (i = 0; i < sih->bits; i++) { | |
636 | irq = irq_base + i; | |
637 | ||
638 | set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip, | |
639 | handle_edge_irq); | |
640 | set_irq_chip_data(irq, agent); | |
641 | activate_irq(irq); | |
642 | } | |
643 | ||
644 | status = irq_base; | |
645 | twl4030_irq_next += i; | |
646 | ||
647 | /* replace generic PIH handler (handle_simple_irq) */ | |
648 | irq = sih_mod + twl4030_irq_base; | |
649 | set_irq_data(irq, agent); | |
650 | set_irq_chained_handler(irq, handle_twl4030_sih); | |
651 | ||
652 | pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, | |
653 | irq, irq_base, twl4030_irq_next - 1); | |
654 | ||
655 | return status; | |
656 | } | |
657 | ||
658 | /* FIXME need a call to reverse twl4030_sih_setup() ... */ | |
659 | ||
660 | ||
661 | /*----------------------------------------------------------------------*/ | |
662 | ||
663 | /* FIXME pass in which interrupt line we'll use ... */ | |
664 | #define twl_irq_line 0 | |
665 | ||
666 | int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) | |
667 | { | |
668 | static struct irq_chip twl4030_irq_chip; | |
669 | ||
670 | int status; | |
671 | int i; | |
672 | struct task_struct *task; | |
673 | ||
674 | /* | |
675 | * Mask and clear all TWL4030 interrupts since initially we do | |
676 | * not have any TWL4030 module interrupt handlers present | |
677 | */ | |
678 | status = twl4030_init_sih_modules(twl_irq_line); | |
679 | if (status < 0) | |
680 | return status; | |
681 | ||
682 | wq = create_singlethread_workqueue("twl4030-irqchip"); | |
683 | if (!wq) { | |
684 | pr_err("twl4030: workqueue FAIL\n"); | |
685 | return -ESRCH; | |
686 | } | |
687 | ||
688 | twl4030_irq_base = irq_base; | |
689 | ||
690 | /* install an irq handler for each of the SIH modules; | |
691 | * clone dummy irq_chip since PIH can't *do* anything | |
692 | */ | |
693 | twl4030_irq_chip = dummy_irq_chip; | |
694 | twl4030_irq_chip.name = "twl4030"; | |
695 | ||
696 | twl4030_sih_irq_chip.ack = dummy_irq_chip.ack; | |
697 | ||
698 | for (i = irq_base; i < irq_end; i++) { | |
699 | set_irq_chip_and_handler(i, &twl4030_irq_chip, | |
700 | handle_simple_irq); | |
701 | activate_irq(i); | |
702 | } | |
703 | twl4030_irq_next = i; | |
704 | pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", | |
705 | irq_num, irq_base, twl4030_irq_next - 1); | |
706 | ||
707 | /* ... and the PWR_INT module ... */ | |
708 | status = twl4030_sih_setup(TWL4030_MODULE_INT); | |
709 | if (status < 0) { | |
710 | pr_err("twl4030: sih_setup PWR INT --> %d\n", status); | |
711 | goto fail; | |
712 | } | |
713 | ||
714 | /* install an irq handler to demultiplex the TWL4030 interrupt */ | |
715 | task = start_twl4030_irq_thread(irq_num); | |
716 | if (!task) { | |
717 | pr_err("twl4030: irq thread FAIL\n"); | |
718 | status = -ESRCH; | |
719 | goto fail; | |
720 | } | |
721 | ||
722 | set_irq_data(irq_num, task); | |
723 | set_irq_chained_handler(irq_num, handle_twl4030_pih); | |
724 | ||
725 | return status; | |
726 | ||
727 | fail: | |
728 | for (i = irq_base; i < irq_end; i++) | |
729 | set_irq_chip_and_handler(i, NULL, NULL); | |
730 | destroy_workqueue(wq); | |
731 | wq = NULL; | |
732 | return status; | |
733 | } | |
734 | ||
735 | int twl_exit_irq(void) | |
736 | { | |
737 | /* FIXME undo twl_init_irq() */ | |
738 | if (twl4030_irq_base) { | |
739 | pr_err("twl4030: can't yet clean up IRQs?\n"); | |
740 | return -ENOSYS; | |
741 | } | |
742 | return 0; | |
743 | } |