Commit | Line | Data |
---|---|---|
6b1baefe | 1 | // SPDX-License-Identifier: GPL-2.0-only |
16fa3dc7 KM |
2 | /** |
3 | * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI | |
4 | * | |
9f4a3ece | 5 | * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com |
16fa3dc7 | 6 | * Author: Keshava Munegowda <keshava_mgowda@ti.com> |
9f4a3ece | 7 | * Author: Roger Quadros <rogerq@ti.com> |
16fa3dc7 KM |
8 | */ |
9 | #include <linux/kernel.h> | |
10 | #include <linux/module.h> | |
11 | #include <linux/types.h> | |
12 | #include <linux/slab.h> | |
13 | #include <linux/spinlock.h> | |
14 | #include <linux/platform_device.h> | |
15 | #include <linux/clk.h> | |
16 | #include <linux/io.h> | |
17 | #include <linux/err.h> | |
16fa3dc7 | 18 | #include <linux/pm_runtime.h> |
e8c4a7ac | 19 | #include <linux/platform_data/usb-omap.h> |
48130b8f | 20 | #include <linux/of.h> |
16fa3dc7 | 21 | |
17ed4d22 BD |
22 | #include "omap-usb.h" |
23 | ||
16fa3dc7 KM |
24 | #define USBTLL_DRIVER_NAME "usbhs_tll" |
25 | ||
26 | /* TLL Register Set */ | |
27 | #define OMAP_USBTLL_REVISION (0x00) | |
28 | #define OMAP_USBTLL_SYSCONFIG (0x10) | |
29 | #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) | |
30 | #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) | |
31 | #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) | |
32 | #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) | |
33 | #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) | |
34 | ||
35 | #define OMAP_USBTLL_SYSSTATUS (0x14) | |
36 | #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) | |
37 | ||
38 | #define OMAP_USBTLL_IRQSTATUS (0x18) | |
39 | #define OMAP_USBTLL_IRQENABLE (0x1C) | |
40 | ||
41 | #define OMAP_TLL_SHARED_CONF (0x30) | |
42 | #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) | |
43 | #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) | |
44 | #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) | |
45 | #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) | |
46 | #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) | |
47 | ||
48 | #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) | |
49 | #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 | |
300c2f8f RQ |
50 | #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) |
51 | #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) | |
16fa3dc7 KM |
52 | #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) |
53 | #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) | |
54 | #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) | |
55 | #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) | |
300c2f8f | 56 | #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1) |
16fa3dc7 KM |
57 | #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) |
58 | #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) | |
59 | ||
60 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 | |
61 | #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 | |
62 | #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 | |
63 | #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 | |
64 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 | |
65 | #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 | |
66 | #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 | |
67 | #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 | |
68 | #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA | |
69 | #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB | |
70 | ||
71 | #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) | |
72 | #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) | |
73 | #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) | |
74 | #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) | |
75 | #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) | |
76 | #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) | |
77 | #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) | |
78 | #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) | |
79 | #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) | |
80 | ||
81 | #define OMAP_REV2_TLL_CHANNEL_COUNT 2 | |
82 | #define OMAP_TLL_CHANNEL_COUNT 3 | |
83 | #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) | |
84 | #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) | |
85 | #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) | |
86 | ||
87 | /* Values of USBTLL_REVISION - Note: these are not given in the TRM */ | |
88 | #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ | |
89 | #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ | |
90 | #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ | |
300c2f8f | 91 | #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */ |
16fa3dc7 KM |
92 | |
93 | #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) | |
94 | ||
32a51f2a RQ |
95 | /* only PHY and UNUSED modes don't need TLL */ |
96 | #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\ | |
97 | (x) != OMAP_EHCI_PORT_MODE_PHY) | |
98 | ||
16fa3dc7 | 99 | struct usbtll_omap { |
16c2004d LM |
100 | void __iomem *base; |
101 | int nch; /* num. of channels */ | |
102 | struct clk *ch_clk[0]; /* must be the last member */ | |
16fa3dc7 KM |
103 | }; |
104 | ||
105 | /*-------------------------------------------------------------------------*/ | |
106 | ||
7ed86191 RQ |
107 | static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; |
108 | static struct device *tll_dev; | |
66751446 | 109 | static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */ |
16fa3dc7 KM |
110 | |
111 | /*-------------------------------------------------------------------------*/ | |
112 | ||
113 | static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) | |
114 | { | |
dd6eb26f | 115 | writel_relaxed(val, base + reg); |
16fa3dc7 KM |
116 | } |
117 | ||
118 | static inline u32 usbtll_read(void __iomem *base, u32 reg) | |
119 | { | |
dd6eb26f | 120 | return readl_relaxed(base + reg); |
16fa3dc7 KM |
121 | } |
122 | ||
993dc737 | 123 | static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val) |
16fa3dc7 | 124 | { |
dd6eb26f | 125 | writeb_relaxed(val, base + reg); |
16fa3dc7 KM |
126 | } |
127 | ||
993dc737 | 128 | static inline u8 usbtll_readb(void __iomem *base, u32 reg) |
16fa3dc7 | 129 | { |
dd6eb26f | 130 | return readb_relaxed(base + reg); |
16fa3dc7 KM |
131 | } |
132 | ||
133 | /*-------------------------------------------------------------------------*/ | |
134 | ||
135 | static bool is_ohci_port(enum usbhs_omap_port_mode pmode) | |
136 | { | |
137 | switch (pmode) { | |
138 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
139 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
140 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
141 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
142 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
143 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
144 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
145 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
146 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
147 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
148 | return true; | |
149 | ||
150 | default: | |
151 | return false; | |
152 | } | |
153 | } | |
154 | ||
155 | /* | |
156 | * convert the port-mode enum to a value we can use in the FSLSMODE | |
157 | * field of USBTLL_CHANNEL_CONF | |
158 | */ | |
159 | static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) | |
160 | { | |
161 | switch (mode) { | |
162 | case OMAP_USBHS_PORT_MODE_UNUSED: | |
163 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: | |
164 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | |
165 | ||
166 | case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: | |
167 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; | |
168 | ||
169 | case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: | |
170 | return OMAP_TLL_FSLSMODE_3PIN_PHY; | |
171 | ||
172 | case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: | |
173 | return OMAP_TLL_FSLSMODE_4PIN_PHY; | |
174 | ||
175 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: | |
176 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; | |
177 | ||
178 | case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: | |
179 | return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; | |
180 | ||
181 | case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: | |
182 | return OMAP_TLL_FSLSMODE_3PIN_TLL; | |
183 | ||
184 | case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: | |
185 | return OMAP_TLL_FSLSMODE_4PIN_TLL; | |
186 | ||
187 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: | |
188 | return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; | |
189 | ||
190 | case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: | |
191 | return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; | |
192 | default: | |
193 | pr_warn("Invalid port mode, using default\n"); | |
194 | return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; | |
195 | } | |
196 | } | |
197 | ||
198 | /** | |
199 | * usbtll_omap_probe - initialize TI-based HCDs | |
200 | * | |
201 | * Allocates basic resources for this USB host controller. | |
202 | */ | |
f791be49 | 203 | static int usbtll_omap_probe(struct platform_device *pdev) |
16fa3dc7 KM |
204 | { |
205 | struct device *dev = &pdev->dev; | |
16fa3dc7 KM |
206 | struct resource *res; |
207 | struct usbtll_omap *tll; | |
16c2004d LM |
208 | void __iomem *base; |
209 | int i, nch, ver; | |
16fa3dc7 KM |
210 | |
211 | dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); | |
212 | ||
16fa3dc7 | 213 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
16c2004d LM |
214 | base = devm_ioremap_resource(dev, res); |
215 | if (IS_ERR(base)) | |
216 | return PTR_ERR(base); | |
16fa3dc7 | 217 | |
16fa3dc7 KM |
218 | pm_runtime_enable(dev); |
219 | pm_runtime_get_sync(dev); | |
220 | ||
16c2004d | 221 | ver = usbtll_read(base, OMAP_USBTLL_REVISION); |
16fa3dc7 KM |
222 | switch (ver) { |
223 | case OMAP_USBTLL_REV1: | |
300c2f8f | 224 | case OMAP_USBTLL_REV4: |
16c2004d | 225 | nch = OMAP_TLL_CHANNEL_COUNT; |
16fa3dc7 | 226 | break; |
7e0ff103 | 227 | case OMAP_USBTLL_REV2: |
16fa3dc7 | 228 | case OMAP_USBTLL_REV3: |
16c2004d | 229 | nch = OMAP_REV2_TLL_CHANNEL_COUNT; |
16fa3dc7 KM |
230 | break; |
231 | default: | |
16c2004d LM |
232 | nch = OMAP_TLL_CHANNEL_COUNT; |
233 | dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n", | |
234 | ver, nch); | |
7e0ff103 | 235 | break; |
16fa3dc7 KM |
236 | } |
237 | ||
16c2004d LM |
238 | tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]), |
239 | GFP_KERNEL); | |
240 | if (!tll) { | |
241 | pm_runtime_put_sync(dev); | |
242 | pm_runtime_disable(dev); | |
243 | return -ENOMEM; | |
0bde3e9f RQ |
244 | } |
245 | ||
16c2004d LM |
246 | tll->base = base; |
247 | tll->nch = nch; | |
248 | platform_set_drvdata(pdev, tll); | |
249 | ||
250 | for (i = 0; i < nch; i++) { | |
0bde3e9f RQ |
251 | char clkname[] = "usb_tll_hs_usb_chx_clk"; |
252 | ||
253 | snprintf(clkname, sizeof(clkname), | |
254 | "usb_tll_hs_usb_ch%d_clk", i); | |
255 | tll->ch_clk[i] = clk_get(dev, clkname); | |
256 | ||
257 | if (IS_ERR(tll->ch_clk[i])) | |
258 | dev_dbg(dev, "can't get clock : %s\n", clkname); | |
b49b927f RQ |
259 | else |
260 | clk_prepare(tll->ch_clk[i]); | |
0bde3e9f RQ |
261 | } |
262 | ||
9f4a3ece RQ |
263 | pm_runtime_put_sync(dev); |
264 | /* only after this can omap_tll_enable/disable work */ | |
265 | spin_lock(&tll_lock); | |
266 | tll_dev = dev; | |
267 | spin_unlock(&tll_lock); | |
268 | ||
269 | return 0; | |
9f4a3ece RQ |
270 | } |
271 | ||
272 | /** | |
273 | * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs | |
274 | * @pdev: USB Host Controller being removed | |
275 | * | |
276 | * Reverses the effect of usbtll_omap_probe(). | |
277 | */ | |
278 | static int usbtll_omap_remove(struct platform_device *pdev) | |
279 | { | |
280 | struct usbtll_omap *tll = platform_get_drvdata(pdev); | |
281 | int i; | |
282 | ||
283 | spin_lock(&tll_lock); | |
284 | tll_dev = NULL; | |
285 | spin_unlock(&tll_lock); | |
286 | ||
b49b927f RQ |
287 | for (i = 0; i < tll->nch; i++) { |
288 | if (!IS_ERR(tll->ch_clk[i])) { | |
289 | clk_unprepare(tll->ch_clk[i]); | |
9f4a3ece | 290 | clk_put(tll->ch_clk[i]); |
b49b927f RQ |
291 | } |
292 | } | |
9f4a3ece RQ |
293 | |
294 | pm_runtime_disable(&pdev->dev); | |
295 | return 0; | |
296 | } | |
297 | ||
48130b8f RQ |
298 | static const struct of_device_id usbtll_omap_dt_ids[] = { |
299 | { .compatible = "ti,usbhs-tll" }, | |
300 | { } | |
301 | }; | |
302 | ||
303 | MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids); | |
304 | ||
9f4a3ece RQ |
305 | static struct platform_driver usbtll_omap_driver = { |
306 | .driver = { | |
307 | .name = (char *)usbtll_driver_name, | |
0f54e1e1 | 308 | .of_match_table = usbtll_omap_dt_ids, |
9f4a3ece RQ |
309 | }, |
310 | .probe = usbtll_omap_probe, | |
311 | .remove = usbtll_omap_remove, | |
312 | }; | |
313 | ||
314 | int omap_tll_init(struct usbhs_omap_platform_data *pdata) | |
315 | { | |
316 | int i; | |
317 | bool needs_tll; | |
318 | unsigned reg; | |
319 | struct usbtll_omap *tll; | |
320 | ||
76a0775d | 321 | if (!tll_dev) |
9f4a3ece | 322 | return -ENODEV; |
9f4a3ece | 323 | |
76a0775d | 324 | pm_runtime_get_sync(tll_dev); |
9f4a3ece | 325 | |
76a0775d RQ |
326 | spin_lock(&tll_lock); |
327 | tll = dev_get_drvdata(tll_dev); | |
32a51f2a RQ |
328 | needs_tll = false; |
329 | for (i = 0; i < tll->nch; i++) | |
330 | needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); | |
331 | ||
332 | if (needs_tll) { | |
9f4a3ece | 333 | void __iomem *base = tll->base; |
16fa3dc7 KM |
334 | |
335 | /* Program Common TLL register */ | |
336 | reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); | |
337 | reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON | |
338 | | OMAP_TLL_SHARED_CONF_USB_DIVRATION); | |
339 | reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; | |
340 | reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; | |
341 | ||
342 | usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); | |
343 | ||
344 | /* Enable channels now */ | |
7e0ff103 | 345 | for (i = 0; i < tll->nch; i++) { |
16fa3dc7 KM |
346 | reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); |
347 | ||
348 | if (is_ohci_port(pdata->port_mode[i])) { | |
349 | reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) | |
350 | << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; | |
351 | reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; | |
352 | } else if (pdata->port_mode[i] == | |
353 | OMAP_EHCI_PORT_MODE_TLL) { | |
354 | /* | |
76d3341b TL |
355 | * Disable UTMI AutoIdle, BitStuffing |
356 | * and use SDR Mode. Enable ULPI AutoIdle. | |
16fa3dc7 KM |
357 | */ |
358 | reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE | |
16fa3dc7 | 359 | | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); |
8b8a84c5 | 360 | reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; |
76d3341b | 361 | reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE; |
300c2f8f RQ |
362 | } else if (pdata->port_mode[i] == |
363 | OMAP_EHCI_PORT_MODE_HSIC) { | |
364 | /* | |
365 | * HSIC Mode requires UTMI port configurations | |
366 | */ | |
367 | reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS | |
368 | | OMAP_TLL_CHANNEL_CONF_CHRGVBUS | |
369 | | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI | |
370 | | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; | |
16fa3dc7 KM |
371 | } else { |
372 | continue; | |
373 | } | |
374 | reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; | |
375 | usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg); | |
376 | ||
377 | usbtll_writeb(base, | |
378 | OMAP_TLL_ULPI_SCRATCH_REGISTER(i), | |
379 | 0xbe); | |
380 | } | |
381 | } | |
382 | ||
66751446 | 383 | spin_unlock(&tll_lock); |
76a0775d | 384 | pm_runtime_put_sync(tll_dev); |
16fa3dc7 | 385 | |
1a7a8d70 | 386 | return 0; |
16fa3dc7 | 387 | } |
9f4a3ece | 388 | EXPORT_SYMBOL_GPL(omap_tll_init); |
16fa3dc7 | 389 | |
9f4a3ece | 390 | int omap_tll_enable(struct usbhs_omap_platform_data *pdata) |
16fa3dc7 | 391 | { |
0bde3e9f | 392 | int i; |
9f4a3ece | 393 | struct usbtll_omap *tll; |
0bde3e9f | 394 | |
76a0775d | 395 | if (!tll_dev) |
9f4a3ece | 396 | return -ENODEV; |
16fa3dc7 | 397 | |
9f4a3ece | 398 | pm_runtime_get_sync(tll_dev); |
16fa3dc7 | 399 | |
76a0775d RQ |
400 | spin_lock(&tll_lock); |
401 | tll = dev_get_drvdata(tll_dev); | |
402 | ||
0bde3e9f | 403 | for (i = 0; i < tll->nch; i++) { |
32a51f2a | 404 | if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { |
0bde3e9f | 405 | int r; |
16fa3dc7 | 406 | |
0bde3e9f RQ |
407 | if (IS_ERR(tll->ch_clk[i])) |
408 | continue; | |
409 | ||
b49b927f | 410 | r = clk_enable(tll->ch_clk[i]); |
0bde3e9f | 411 | if (r) { |
9f4a3ece | 412 | dev_err(tll_dev, |
0bde3e9f RQ |
413 | "Error enabling ch %d clock: %d\n", i, r); |
414 | } | |
415 | } | |
416 | } | |
16fa3dc7 | 417 | |
9f4a3ece RQ |
418 | spin_unlock(&tll_lock); |
419 | ||
16fa3dc7 KM |
420 | return 0; |
421 | } | |
9f4a3ece | 422 | EXPORT_SYMBOL_GPL(omap_tll_enable); |
16fa3dc7 | 423 | |
9f4a3ece | 424 | int omap_tll_disable(struct usbhs_omap_platform_data *pdata) |
16fa3dc7 | 425 | { |
0bde3e9f | 426 | int i; |
9f4a3ece RQ |
427 | struct usbtll_omap *tll; |
428 | ||
76a0775d | 429 | if (!tll_dev) |
9f4a3ece | 430 | return -ENODEV; |
16fa3dc7 | 431 | |
76a0775d | 432 | spin_lock(&tll_lock); |
9f4a3ece | 433 | tll = dev_get_drvdata(tll_dev); |
16fa3dc7 | 434 | |
0bde3e9f | 435 | for (i = 0; i < tll->nch; i++) { |
32a51f2a | 436 | if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { |
0bde3e9f | 437 | if (!IS_ERR(tll->ch_clk[i])) |
b49b927f | 438 | clk_disable(tll->ch_clk[i]); |
0bde3e9f RQ |
439 | } |
440 | } | |
16fa3dc7 | 441 | |
66751446 | 442 | spin_unlock(&tll_lock); |
76a0775d | 443 | pm_runtime_put_sync(tll_dev); |
66751446 | 444 | |
9f4a3ece | 445 | return 0; |
16fa3dc7 KM |
446 | } |
447 | EXPORT_SYMBOL_GPL(omap_tll_disable); | |
448 | ||
449 | MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); | |
48130b8f | 450 | MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); |
16fa3dc7 KM |
451 | MODULE_LICENSE("GPL v2"); |
452 | MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers"); | |
453 | ||
454 | static int __init omap_usbtll_drvinit(void) | |
455 | { | |
456 | return platform_driver_register(&usbtll_omap_driver); | |
457 | } | |
458 | ||
459 | /* | |
460 | * init before usbhs core driver; | |
461 | * The usbtll driver should be initialized before | |
462 | * the usbhs core driver probe function is called. | |
463 | */ | |
464 | fs_initcall(omap_usbtll_drvinit); | |
465 | ||
466 | static void __exit omap_usbtll_drvexit(void) | |
467 | { | |
468 | platform_driver_unregister(&usbtll_omap_driver); | |
469 | } | |
470 | module_exit(omap_usbtll_drvexit); |