Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
a15123c7 MB |
2 | /* |
3 | * arizona-spi.c -- Arizona SPI bus interface | |
4 | * | |
5 | * Copyright 2012 Wolfson Microelectronics plc | |
6 | * | |
7 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
a15123c7 MB |
8 | */ |
9 | ||
e9338367 | 10 | #include <linux/acpi.h> |
a15123c7 | 11 | #include <linux/err.h> |
e9338367 HG |
12 | #include <linux/gpio/consumer.h> |
13 | #include <linux/gpio/machine.h> | |
a15123c7 MB |
14 | #include <linux/module.h> |
15 | #include <linux/pm_runtime.h> | |
16 | #include <linux/regmap.h> | |
17 | #include <linux/regulator/consumer.h> | |
18 | #include <linux/slab.h> | |
19 | #include <linux/spi/spi.h> | |
3d6d1d1c | 20 | #include <linux/of.h> |
e9338367 | 21 | #include <uapi/linux/input-event-codes.h> |
a15123c7 MB |
22 | |
23 | #include <linux/mfd/arizona/core.h> | |
24 | ||
25 | #include "arizona.h" | |
26 | ||
e9338367 | 27 | #ifdef CONFIG_ACPI |
c4d09226 WY |
28 | static const struct acpi_gpio_params reset_gpios = { 1, 0, false }; |
29 | static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false }; | |
e9338367 HG |
30 | |
31 | static const struct acpi_gpio_mapping arizona_acpi_gpios[] = { | |
32 | { "reset-gpios", &reset_gpios, 1, }, | |
33 | { "wlf,ldoena-gpios", &ldoena_gpios, 1 }, | |
34 | { } | |
35 | }; | |
36 | ||
37 | /* | |
38 | * The ACPI resources for the device only describe external GPIO-s. They do | |
39 | * not provide mappings for the GPIO-s coming from the Arizona codec itself. | |
40 | */ | |
41 | static const struct gpiod_lookup arizona_soc_gpios[] = { | |
42 | { "arizona", 2, "wlf,spkvdd-ena", 0, GPIO_ACTIVE_HIGH }, | |
43 | { "arizona", 4, "wlf,micd-pol", 0, GPIO_ACTIVE_LOW }, | |
44 | }; | |
45 | ||
e9338367 HG |
46 | static void arizona_spi_acpi_remove_lookup(void *lookup) |
47 | { | |
48 | gpiod_remove_lookup_table(lookup); | |
49 | } | |
50 | ||
3cf2b434 HG |
51 | /* For ACPI tables from boards which ship with Windows as factory OS */ |
52 | static int arizona_spi_acpi_windows_probe(struct arizona *arizona) | |
e9338367 HG |
53 | { |
54 | struct gpiod_lookup_table *lookup; | |
55 | acpi_status status; | |
56 | int ret; | |
57 | ||
58 | /* Add mappings for the 2 ACPI declared GPIOs used for reset and ldo-ena */ | |
59 | devm_acpi_dev_add_driver_gpios(arizona->dev, arizona_acpi_gpios); | |
60 | ||
61 | /* Add lookups for the SoCs own GPIOs used for micdet-polarity and spkVDD-enable */ | |
62 | lookup = devm_kzalloc(arizona->dev, | |
63 | struct_size(lookup, table, ARRAY_SIZE(arizona_soc_gpios) + 1), | |
64 | GFP_KERNEL); | |
65 | if (!lookup) | |
66 | return -ENOMEM; | |
67 | ||
68 | lookup->dev_id = dev_name(arizona->dev); | |
69 | memcpy(lookup->table, arizona_soc_gpios, sizeof(arizona_soc_gpios)); | |
70 | ||
71 | gpiod_add_lookup_table(lookup); | |
72 | ret = devm_add_action_or_reset(arizona->dev, arizona_spi_acpi_remove_lookup, lookup); | |
73 | if (ret) | |
74 | return ret; | |
75 | ||
76 | /* Enable 32KHz clock from SoC to codec for jack-detect */ | |
77 | status = acpi_evaluate_object(ACPI_HANDLE(arizona->dev), "CLKE", NULL, NULL); | |
78 | if (ACPI_FAILURE(status)) | |
79 | dev_warn(arizona->dev, "Failed to enable 32KHz clk ACPI error %d\n", status); | |
80 | ||
3cf2b434 HG |
81 | return 0; |
82 | } | |
83 | ||
9ed55e9a HG |
84 | /* For ACPI tables from boards which ship with Android as factory OS */ |
85 | static int arizona_spi_acpi_android_probe(struct arizona *arizona) | |
86 | { | |
87 | int ret; | |
88 | ||
89 | /* | |
90 | * Get the reset GPIO, treating -ENOENT as -EPROBE_DEFER to wait for | |
91 | * the x86-android-tablets module to register the board specific GPIO | |
92 | * lookup table. | |
93 | */ | |
94 | arizona->pdata.reset = devm_gpiod_get(arizona->dev, "reset", GPIOD_OUT_LOW); | |
95 | if (IS_ERR(arizona->pdata.reset)) { | |
96 | ret = PTR_ERR(arizona->pdata.reset); | |
97 | if (ret == -ENOENT) { | |
98 | dev_info_once(arizona->dev, | |
99 | "Deferring probe till GPIO lookup is registered\n"); | |
100 | ret = -EPROBE_DEFER; | |
101 | } | |
102 | return dev_err_probe(arizona->dev, ret, "getting reset GPIO\n"); | |
103 | } | |
104 | ||
105 | return 0; | |
106 | } | |
107 | ||
3cf2b434 HG |
108 | /* |
109 | * The AOSP 3.5 mm Headset: Accessory Specification gives the following values: | |
110 | * Function A Play/Pause: 0 ohm | |
111 | * Function D Voice assistant: 135 ohm | |
112 | * Function B Volume Up 240 ohm | |
113 | * Function C Volume Down 470 ohm | |
114 | * Minimum Mic DC resistance 1000 ohm | |
115 | * Minimum Ear speaker impedance 16 ohm | |
116 | * Note the first max value below must be less then the min. speaker impedance, | |
117 | * to allow CTIA/OMTP detection to work. The other max values are the closest | |
118 | * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances. | |
119 | */ | |
120 | static const struct arizona_micd_range arizona_micd_aosp_ranges[] = { | |
121 | { .max = 11, .key = KEY_PLAYPAUSE }, | |
122 | { .max = 186, .key = KEY_VOICECOMMAND }, | |
123 | { .max = 348, .key = KEY_VOLUMEUP }, | |
124 | { .max = 752, .key = KEY_VOLUMEDOWN }, | |
125 | }; | |
126 | ||
127 | static int arizona_spi_acpi_probe(struct arizona *arizona) | |
128 | { | |
9ed55e9a | 129 | struct acpi_device *adev = ACPI_COMPANION(arizona->dev); |
3cf2b434 HG |
130 | int ret; |
131 | ||
9ed55e9a HG |
132 | if (acpi_dev_hid_uid_match(adev, "10WM5102", NULL)) |
133 | ret = arizona_spi_acpi_android_probe(arizona); | |
134 | else | |
135 | ret = arizona_spi_acpi_windows_probe(arizona); | |
136 | ||
3cf2b434 HG |
137 | if (ret) |
138 | return ret; | |
139 | ||
e9338367 HG |
140 | /* |
141 | * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING | |
142 | * The IRQ line will stay low when a new IRQ event happens between reading | |
143 | * the IRQ status flags and acknowledging them. When the IRQ line stays | |
144 | * low like this the IRQ will never trigger again when its type is set | |
145 | * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this. | |
146 | * | |
147 | * Note theoretically it is possible that some boards are not capable | |
148 | * of handling active low level interrupts. In that case setting the | |
149 | * flag to IRQF_TRIGGER_FALLING would not be a bug (and we would need | |
150 | * to work around this) but so far all known usages of IRQF_TRIGGER_FALLING | |
151 | * are a bug in the board's DSDT. | |
152 | */ | |
153 | arizona->pdata.irq_flags = IRQF_TRIGGER_LOW; | |
154 | ||
155 | /* Wait 200 ms after jack insertion */ | |
156 | arizona->pdata.micd_detect_debounce = 200; | |
157 | ||
158 | /* Use standard AOSP values for headset-button mappings */ | |
159 | arizona->pdata.micd_ranges = arizona_micd_aosp_ranges; | |
160 | arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges); | |
161 | ||
162 | return 0; | |
163 | } | |
164 | ||
165 | static const struct acpi_device_id arizona_acpi_match[] = { | |
166 | { | |
167 | .id = "WM510204", | |
168 | .driver_data = WM5102, | |
169 | }, | |
170 | { | |
171 | .id = "WM510205", | |
172 | .driver_data = WM5102, | |
173 | }, | |
9ed55e9a HG |
174 | { |
175 | .id = "10WM5102", | |
176 | .driver_data = WM5102, | |
177 | }, | |
e9338367 HG |
178 | { } |
179 | }; | |
180 | MODULE_DEVICE_TABLE(acpi, arizona_acpi_match); | |
181 | #else | |
182 | static int arizona_spi_acpi_probe(struct arizona *arizona) | |
183 | { | |
184 | return -ENODEV; | |
185 | } | |
186 | #endif | |
187 | ||
f791be49 | 188 | static int arizona_spi_probe(struct spi_device *spi) |
a15123c7 MB |
189 | { |
190 | const struct spi_device_id *id = spi_get_device_id(spi); | |
039da225 | 191 | const void *match_data; |
a15123c7 | 192 | struct arizona *arizona; |
b61c1ec0 | 193 | const struct regmap_config *regmap_config = NULL; |
039da225 | 194 | unsigned long type = 0; |
942786e6 | 195 | int ret; |
a15123c7 | 196 | |
039da225 HG |
197 | match_data = device_get_match_data(&spi->dev); |
198 | if (match_data) | |
199 | type = (unsigned long)match_data; | |
200 | else if (id) | |
d781009c MB |
201 | type = id->driver_data; |
202 | ||
203 | switch (type) { | |
a15123c7 | 204 | case WM5102: |
b61c1ec0 RF |
205 | if (IS_ENABLED(CONFIG_MFD_WM5102)) |
206 | regmap_config = &wm5102_spi_regmap; | |
a15123c7 | 207 | break; |
e102befe | 208 | case WM5110: |
e5d4ef0d | 209 | case WM8280: |
b61c1ec0 RF |
210 | if (IS_ENABLED(CONFIG_MFD_WM5110)) |
211 | regmap_config = &wm5110_spi_regmap; | |
e102befe | 212 | break; |
ea1f3339 RF |
213 | case WM1831: |
214 | case CS47L24: | |
215 | if (IS_ENABLED(CONFIG_MFD_CS47L24)) | |
216 | regmap_config = &cs47l24_spi_regmap; | |
217 | break; | |
a15123c7 | 218 | default: |
2e44e28a | 219 | dev_err(&spi->dev, "Unknown device type %ld\n", type); |
a15123c7 MB |
220 | return -EINVAL; |
221 | } | |
222 | ||
b61c1ec0 RF |
223 | if (!regmap_config) { |
224 | dev_err(&spi->dev, | |
225 | "No kernel support for device type %ld\n", type); | |
a15123c7 MB |
226 | return -EINVAL; |
227 | } | |
228 | ||
229 | arizona = devm_kzalloc(&spi->dev, sizeof(*arizona), GFP_KERNEL); | |
230 | if (arizona == NULL) | |
231 | return -ENOMEM; | |
232 | ||
233 | arizona->regmap = devm_regmap_init_spi(spi, regmap_config); | |
234 | if (IS_ERR(arizona->regmap)) { | |
235 | ret = PTR_ERR(arizona->regmap); | |
236 | dev_err(&spi->dev, "Failed to allocate register map: %d\n", | |
237 | ret); | |
238 | return ret; | |
239 | } | |
240 | ||
2e44e28a | 241 | arizona->type = type; |
a15123c7 MB |
242 | arizona->dev = &spi->dev; |
243 | arizona->irq = spi->irq; | |
244 | ||
e9338367 HG |
245 | if (has_acpi_companion(&spi->dev)) { |
246 | ret = arizona_spi_acpi_probe(arizona); | |
247 | if (ret) | |
248 | return ret; | |
249 | } | |
250 | ||
a15123c7 MB |
251 | return arizona_dev_init(arizona); |
252 | } | |
253 | ||
a0386bba | 254 | static void arizona_spi_remove(struct spi_device *spi) |
a15123c7 | 255 | { |
e9642d5e | 256 | struct arizona *arizona = spi_get_drvdata(spi); |
6f467e5f | 257 | |
a15123c7 | 258 | arizona_dev_exit(arizona); |
a15123c7 MB |
259 | } |
260 | ||
261 | static const struct spi_device_id arizona_spi_ids[] = { | |
262 | { "wm5102", WM5102 }, | |
e102befe | 263 | { "wm5110", WM5110 }, |
e5d4ef0d | 264 | { "wm8280", WM8280 }, |
ea1f3339 RF |
265 | { "wm1831", WM1831 }, |
266 | { "cs47l24", CS47L24 }, | |
a15123c7 MB |
267 | { }, |
268 | }; | |
269 | MODULE_DEVICE_TABLE(spi, arizona_spi_ids); | |
270 | ||
3f65555c | 271 | #ifdef CONFIG_OF |
10377bb2 | 272 | static const struct of_device_id arizona_spi_of_match[] = { |
3f65555c CK |
273 | { .compatible = "wlf,wm5102", .data = (void *)WM5102 }, |
274 | { .compatible = "wlf,wm5110", .data = (void *)WM5110 }, | |
275 | { .compatible = "wlf,wm8280", .data = (void *)WM8280 }, | |
276 | { .compatible = "wlf,wm1831", .data = (void *)WM1831 }, | |
277 | { .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 }, | |
278 | {}, | |
279 | }; | |
280 | #endif | |
281 | ||
a15123c7 MB |
282 | static struct spi_driver arizona_spi_driver = { |
283 | .driver = { | |
284 | .name = "arizona", | |
50d3ac7d | 285 | .pm = pm_ptr(&arizona_pm_ops), |
3f65555c | 286 | .of_match_table = of_match_ptr(arizona_spi_of_match), |
e9338367 | 287 | .acpi_match_table = ACPI_PTR(arizona_acpi_match), |
a15123c7 MB |
288 | }, |
289 | .probe = arizona_spi_probe, | |
84449216 | 290 | .remove = arizona_spi_remove, |
a15123c7 MB |
291 | .id_table = arizona_spi_ids, |
292 | }; | |
293 | ||
294 | module_spi_driver(arizona_spi_driver); | |
295 | ||
06e577b4 | 296 | MODULE_SOFTDEP("pre: arizona_ldo1"); |
a15123c7 MB |
297 | MODULE_DESCRIPTION("Arizona SPI bus interface"); |
298 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
299 | MODULE_LICENSE("GPL"); |