Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DB |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
b6d6454f BD |
24 | config MFD_SM501 |
25 | tristate "Support for Silicon Motion SM501" | |
26 | ---help--- | |
27 | This is the core driver for the Silicon Motion SM501 multimedia | |
28 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
29 | provide numerous interfaces including USB host controller, USB gadget, |
30 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
31 | interface. The device may be connected by PCI or local bus with |
32 | varying functions enabled. | |
33 | ||
f61be273 BD |
34 | config MFD_SM501_GPIO |
35 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 36 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
37 | ---help--- |
38 | This option uses the gpio library layer to export the 64 GPIO | |
39 | lines on the SM501. The platform data is used to supply the | |
40 | base number for the first GPIO line to register. | |
41 | ||
fa9ff4b1 SO |
42 | config MFD_ASIC3 |
43 | bool "Support for Compaq ASIC3" | |
2eedd604 | 44 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 45 | select MFD_CORE |
fa9ff4b1 SO |
46 | ---help--- |
47 | This driver supports the ASIC3 multifunction chip found on many | |
48 | PDAs (mainly iPAQ and HTC based ones) | |
49 | ||
ca26308c MA |
50 | config MFD_DAVINCI_VOICECODEC |
51 | tristate | |
52 | select MFD_CORE | |
53 | ||
0931a4c6 DB |
54 | config MFD_DM355EVM_MSP |
55 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 56 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
57 | help |
58 | This driver supports the MSP430 microcontroller used on these | |
59 | boards. MSP430 firmware manages resets and power sequencing, | |
60 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
61 | ||
03df0f62 CC |
62 | config MFD_TI_SSP |
63 | tristate "TI Sequencer Serial Port support" | |
64 | depends on ARCH_DAVINCI_TNETV107X | |
65 | select MFD_CORE | |
66 | ---help--- | |
67 | Say Y here if you want support for the Sequencer Serial Port | |
68 | in a Texas Instruments TNETV107X SoC. | |
69 | ||
70 | To compile this driver as a module, choose M here: the | |
71 | module will be called ti-ssp. | |
72 | ||
a1635b8f PZ |
73 | config HTC_EGPIO |
74 | bool "HTC EGPIO support" | |
7444a72e | 75 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
76 | help |
77 | This driver supports the CPLD egpio chip present on | |
78 | several HTC phones. It provides basic support for input | |
79 | pins, output pins, and irqs. | |
80 | ||
5dc3339a PZ |
81 | config HTC_PASIC3 |
82 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 83 | select MFD_CORE |
5dc3339a PZ |
84 | help |
85 | This core driver provides register access for the LED/DS1WM | |
86 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
87 | HTC Magician devices, respectively. Actual functionality is | |
88 | handled by the leds-pasic3 and ds1wm drivers. | |
89 | ||
6048a3dd CM |
90 | config HTC_I2CPLD |
91 | bool "HTC I2C PLD chip support" | |
bef3e20c | 92 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
93 | help |
94 | If you say yes here you get support for the supposed CPLD | |
95 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
96 | This device provides input and output GPIOs through an I2C | |
97 | interface to one or more sub-chips. | |
98 | ||
d9105c2b MV |
99 | config UCB1400_CORE |
100 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 101 | depends on AC97_BUS |
5a49a540 | 102 | depends on GPIOLIB |
d9105c2b MV |
103 | help |
104 | This enables support for the Philips UCB1400 core functions. | |
105 | The UCB1400 is an AC97 audio codec. | |
106 | ||
107 | To compile this driver as a module, choose M here: the | |
108 | module will be called ucb1400_core. | |
109 | ||
16c5c023 JH |
110 | config MFD_LM3533 |
111 | tristate "LM3533 Lighting Power chip" | |
112 | depends on I2C | |
113 | select MFD_CORE | |
114 | select REGMAP_I2C | |
115 | help | |
116 | Say yes here to enable support for National Semiconductor / TI | |
117 | LM3533 Lighting Power chips. | |
118 | ||
119 | This driver provides common support for accessing the device; | |
120 | additional drivers must be enabled in order to use the LED, | |
121 | backlight or ambient-light-sensor functionality of the device. | |
122 | ||
798a8eee LW |
123 | config TPS6105X |
124 | tristate "TPS61050/61052 Boost Converters" | |
125 | depends on I2C | |
2edd3b69 | 126 | select REGULATOR |
fc498fa2 | 127 | select MFD_CORE |
2edd3b69 | 128 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
129 | help |
130 | This option enables a driver for the TP61050/TPS61052 | |
131 | high-power "white LED driver". This boost converter is | |
132 | sometimes used for other things than white LEDs, and | |
133 | also contains a GPIO pin. | |
134 | ||
87c13493 DB |
135 | config TPS65010 |
136 | tristate "TPS6501x Power Management chips" | |
137 | depends on I2C && GPIOLIB | |
138 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
139 | help | |
140 | If you say yes here you get support for the TPS6501x series of | |
141 | Power Management chips. These include voltage regulators, | |
142 | lithium ion/polymer battery charging, and other features that | |
143 | are often used in portable devices like cell phones and cameras. | |
144 | ||
145 | This driver can also be built as a module. If so, the module | |
146 | will be called tps65010. | |
147 | ||
31dd6a26 TF |
148 | config TPS6507X |
149 | tristate "TPS6507x Power Management / Touch Screen chips" | |
150 | select MFD_CORE | |
151 | depends on I2C | |
152 | help | |
153 | If you say yes here you get support for the TPS6507x series of | |
154 | Power Management / Touch Screen chips. These include voltage | |
155 | regulators, lithium ion/polymer battery charging, touch screen | |
156 | and other features that are often used in portable devices. | |
157 | This driver can also be built as a module. If so, the module | |
158 | will be called tps6507x. | |
159 | ||
d48f411c AC |
160 | config MFD_TPS65217 |
161 | tristate "TPS65217 Power Management / White LED chips" | |
162 | depends on I2C | |
163 | select MFD_CORE | |
164 | select REGMAP_I2C | |
165 | help | |
166 | If you say yes here you get support for the TPS65217 series of | |
167 | Power Management / White LED chips. | |
168 | These include voltage regulators, lithium ion/polymer battery | |
169 | charger, wled and other features that are often used in portable | |
170 | devices. | |
171 | ||
172 | This driver can also be built as a module. If so, the module | |
173 | will be called tps65217. | |
174 | ||
37df003c AL |
175 | config MFD_TPS6586X |
176 | bool "TPS6586x Power Management chips" | |
177 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS | |
178 | select MFD_CORE | |
b4410a89 | 179 | depends on REGULATOR |
37df003c AL |
180 | help |
181 | If you say yes here you get support for the TPS6586X series of | |
182 | Power Management chips. | |
183 | This driver provides common support for accessing the device, | |
184 | additional drivers must be enabled in order to use the | |
185 | functionality of the device. | |
186 | ||
187 | This driver can also be built as a module. If so, the module | |
188 | will be called tps6586x. | |
189 | ||
54f323b1 LW |
190 | config MFD_TPS65910 |
191 | bool "TPS65910 Power Management chip" | |
192 | depends on I2C=y && GPIOLIB | |
193 | select MFD_CORE | |
dc9913a0 | 194 | select REGMAP_I2C |
21f7541d | 195 | select IRQ_DOMAIN |
54f323b1 LW |
196 | help |
197 | if you say yes here you get support for the TPS65910 series of | |
198 | Power Management chips. | |
199 | ||
36e52873 | 200 | config MFD_TPS65912 |
5608801b | 201 | bool |
36e52873 MO |
202 | depends on GPIOLIB |
203 | ||
204 | config MFD_TPS65912_I2C | |
231dd9c8 | 205 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
206 | select MFD_CORE |
207 | select MFD_TPS65912 | |
208 | depends on I2C=y && GPIOLIB | |
209 | help | |
210 | If you say yes here you get support for the TPS65912 series of | |
211 | PM chips with I2C interface. | |
212 | ||
213 | config MFD_TPS65912_SPI | |
214 | bool "TPS65912 Power Management chip with SPI" | |
215 | select MFD_CORE | |
216 | select MFD_TPS65912 | |
217 | depends on SPI_MASTER && GPIOLIB | |
218 | help | |
219 | If you say yes here you get support for the TPS65912 series of | |
220 | PM chips with SPI interface. | |
221 | ||
88e75cc3 DB |
222 | config MENELAUS |
223 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 224 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
225 | help |
226 | If you say yes here you get support for the Texas Instruments | |
227 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 228 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
229 | and other features that are often used in portable devices like |
230 | cell phones and PDAs. | |
231 | ||
a603a7fa | 232 | config TWL4030_CORE |
e8deb28c | 233 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 234 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 235 | select IRQ_DOMAIN |
a603a7fa | 236 | help |
e8deb28c | 237 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
238 | This core driver provides register access and IRQ handling |
239 | facilities, and registers devices for the various functions | |
240 | so that function-specific drivers can bind to them. | |
241 | ||
242 | These multi-function chips are found on many OMAP2 and OMAP3 | |
243 | boards, providing power management, RTC, GPIO, keypad, a | |
244 | high speed USB OTG transceiver, an audio codec (on most | |
245 | versions) and many other features. | |
246 | ||
f99c1d4f K |
247 | config TWL4030_MADC |
248 | tristate "Texas Instruments TWL4030 MADC" | |
249 | depends on TWL4030_CORE | |
250 | help | |
251 | This driver provides support for triton TWL4030-MADC. The | |
252 | driver supports both RT and SW conversion methods. | |
253 | ||
254 | This driver can be built as a module. If so it will be | |
255 | named twl4030-madc | |
256 | ||
ebf0bd36 AK |
257 | config TWL4030_POWER |
258 | bool "Support power resources on TWL4030 family chips" | |
259 | depends on TWL4030_CORE && ARM | |
260 | help | |
261 | Say yes here if you want to use the power resources on the | |
262 | TWL4030 family chips. Most of these resources are regulators, | |
263 | which have a separate driver; some are control signals, such | |
264 | as clock request handshaking. | |
265 | ||
266 | This driver uses board-specific data to initialize the resources | |
25985edc | 267 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
268 | or reset when a sleep, wakeup or warm reset event occurs. |
269 | ||
57fe7251 | 270 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
271 | bool |
272 | depends on TWL4030_CORE | |
273 | select MFD_CORE | |
274 | default n | |
275 | ||
31fc03df H |
276 | config TWL6030_PWM |
277 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
278 | depends on TWL4030_CORE | |
279 | select HAVE_PWM | |
280 | default n | |
281 | help | |
282 | Say yes here if you want support for TWL6030 PWM. | |
283 | This is used to control charging LED brightness. | |
284 | ||
f19b2823 | 285 | config TWL6040_CORE |
8eaeb939 PU |
286 | bool "Support for TWL6040 audio codec" |
287 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 288 | select MFD_CORE |
8eaeb939 | 289 | select REGMAP_I2C |
a834e810 | 290 | select IRQ_DOMAIN |
f19b2823 | 291 | default n |
8eaeb939 PU |
292 | help |
293 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
294 | codec. | |
295 | This driver provides common support for accessing the device, | |
296 | additional drivers must be enabled in order to use the | |
297 | functionality of the device (audio, vibra). | |
f19b2823 | 298 | |
27e34995 RV |
299 | config MFD_STMPE |
300 | bool "Support STMicroelectronics STMPE" | |
e789995d | 301 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
302 | select MFD_CORE |
303 | help | |
304 | Support for the STMPE family of I/O Expanders from | |
305 | STMicroelectronics. | |
306 | ||
307 | Currently supported devices are: | |
308 | ||
309 | STMPE811: GPIO, Touchscreen | |
310 | STMPE1601: GPIO, Keypad | |
311 | STMPE2401: GPIO, Keypad | |
312 | STMPE2403: GPIO, Keypad | |
313 | ||
314 | This driver provides common support for accessing the device, | |
315 | additional drivers must be enabled in order to use the functionality | |
316 | of the device. Currently available sub drivers are: | |
317 | ||
318 | GPIO: stmpe-gpio | |
319 | Keypad: stmpe-keypad | |
320 | Touchscreen: stmpe-ts | |
321 | ||
1a6e4b74 VK |
322 | menu "STMPE Interface Drivers" |
323 | depends on MFD_STMPE | |
324 | ||
325 | config STMPE_I2C | |
326 | bool "STMPE I2C Inteface" | |
eedea80f | 327 | depends on I2C=y |
1a6e4b74 VK |
328 | default y |
329 | help | |
330 | This is used to enable I2C interface of STMPE | |
e789995d VK |
331 | |
332 | config STMPE_SPI | |
333 | bool "STMPE SPI Inteface" | |
334 | depends on SPI_MASTER | |
335 | help | |
336 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
337 | endmenu |
338 | ||
f4e8afdc SI |
339 | config MFD_TC3589X |
340 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
341 | depends on I2C=y && GENERIC_HARDIRQS |
342 | select MFD_CORE | |
343 | help | |
f4e8afdc | 344 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
345 | |
346 | This driver provides common support for accessing the device, | |
347 | additional drivers must be enabled in order to use the | |
348 | functionality of the device. | |
349 | ||
1c2c30ac SO |
350 | config MFD_TMIO |
351 | bool | |
352 | default n | |
353 | ||
1f192015 IM |
354 | config MFD_T7L66XB |
355 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 356 | depends on ARM && HAVE_CLK |
1f192015 | 357 | select MFD_CORE |
1c2c30ac | 358 | select MFD_TMIO |
1f192015 IM |
359 | help |
360 | Support for Toshiba Mobile IO Controller T7L66XB | |
361 | ||
cbdfb426 IM |
362 | config MFD_TC6387XB |
363 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 364 | depends on ARM && HAVE_CLK |
cbdfb426 | 365 | select MFD_CORE |
1c2c30ac | 366 | select MFD_TMIO |
cbdfb426 IM |
367 | help |
368 | Support for Toshiba Mobile IO Controller TC6387XB | |
369 | ||
d6315949 DB |
370 | config MFD_TC6393XB |
371 | bool "Support Toshiba TC6393XB" | |
e959da10 | 372 | depends on GPIOLIB && ARM && HAVE_CLK |
f024ff10 | 373 | select MFD_CORE |
1c2c30ac | 374 | select MFD_TMIO |
d6315949 DB |
375 | help |
376 | Support for Toshiba Mobile IO Controller TC6393XB | |
377 | ||
8e2eaabf SO |
378 | config PMIC_DA903X |
379 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
380 | depends on I2C=y | |
381 | help | |
382 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
383 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
384 | usually found on PXA processors-based platforms. This includes | |
385 | the I2C driver and the core APIs _only_, you have to select | |
386 | individual components like LCD backlight, voltage regulators, | |
387 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 388 | |
84c99db8 AJ |
389 | config PMIC_DA9052 |
390 | bool | |
391 | select MFD_CORE | |
392 | ||
cfe04478 AJ |
393 | config MFD_DA9052_SPI |
394 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
395 | select REGMAP_SPI | |
396 | select REGMAP_IRQ | |
397 | select PMIC_DA9052 | |
398 | depends on SPI_MASTER=y | |
399 | help | |
400 | Support for the Dialog Semiconductor DA9052 PMIC | |
401 | when controlled using SPI. This driver provides common support | |
402 | for accessing the device, additional drivers must be enabled in | |
403 | order to use the functionality of the device. | |
404 | ||
84c99db8 AJ |
405 | config MFD_DA9052_I2C |
406 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
407 | select REGMAP_I2C | |
408 | select REGMAP_IRQ | |
409 | select PMIC_DA9052 | |
410 | depends on I2C=y | |
411 | help | |
412 | Support for the Dialog Semiconductor DA9052 PMIC | |
413 | when controlled using I2C. This driver provides common support | |
414 | for accessing the device, additional drivers must be enabled in | |
415 | order to use the functionality of the device. | |
416 | ||
a5736e0b MH |
417 | config PMIC_ADP5520 |
418 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
419 | depends on I2C=y | |
420 | help | |
421 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
422 | Multifunction Power Management IC. This includes | |
423 | the I2C driver and the core APIs _only_, you have to select | |
424 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
425 | under the corresponding menus. | |
8e2eaabf | 426 | |
dae8a969 JL |
427 | config MFD_MAX77686 |
428 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
429 | depends on I2C=y && GENERIC_HARDIRQS | |
430 | select MFD_CORE | |
431 | select REGMAP_I2C | |
432 | select IRQ_DOMAIN | |
433 | help | |
434 | Say yes here to support for Maxim Semiconductor MAX77686. | |
435 | This is a Power Management IC with RTC on chip. | |
436 | This driver provides common support for accessing the device; | |
437 | additional drivers must be enabled in order to use the functionality | |
438 | of the device. | |
439 | ||
83871c00 CC |
440 | config MFD_MAX77693 |
441 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
442 | depends on I2C=y && GENERIC_HARDIRQS | |
443 | select MFD_CORE | |
29f772d4 | 444 | select REGMAP_I2C |
83871c00 CC |
445 | help |
446 | Say yes here to support for Maxim Semiconductor MAX77693. | |
447 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
448 | and MUIC(Micro USB Interface Controller) controls on chip. | |
449 | This driver provides common support for accessing the device; | |
450 | additional drivers must be enabled in order to use the functionality | |
451 | of the device. | |
452 | ||
d50f8f33 | 453 | config MFD_MAX8925 |
1f1cf8f9 | 454 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 455 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 456 | select MFD_CORE |
d50f8f33 HZ |
457 | help |
458 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 459 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
460 | accessing the device, additional drivers must be enabled in order |
461 | to use the functionality of the device. | |
462 | ||
527e7e9a MH |
463 | config MFD_MAX8997 |
464 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
465 | depends on I2C=y && GENERIC_HARDIRQS | |
466 | select MFD_CORE | |
467 | help | |
5a924d13 | 468 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
469 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
470 | MUIC controls on chip. | |
d7e8c01a | 471 | This driver provides common support for accessing the device; |
527e7e9a MH |
472 | additional drivers must be enabled in order to use the functionality |
473 | of the device. | |
474 | ||
156f2528 | 475 | config MFD_MAX8998 |
f8539ddc | 476 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 477 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
478 | select MFD_CORE |
479 | help | |
f8539ddc KP |
480 | Say yes here to support for Maxim Semiconductor MAX8998 and |
481 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 482 | This driver provides common support for accessing the device, |
f8539ddc KP |
483 | additional drivers must be enabled in order to use the functionality |
484 | of the device. | |
156f2528 | 485 | |
c3d4d697 SK |
486 | config MFD_S5M_CORE |
487 | bool "SAMSUNG S5M Series Support" | |
488 | depends on I2C=y && GENERIC_HARDIRQS | |
489 | select MFD_CORE | |
490 | select REGMAP_I2C | |
491 | help | |
492 | Support for the Samsung Electronics S5M MFD series. | |
6b2aac42 | 493 | This driver provides common support for accessing the device, |
c3d4d697 SK |
494 | additional drivers must be enabled in order to use the functionality |
495 | of the device | |
496 | ||
1d9f9f04 | 497 | config MFD_WM8400 |
eee0e4b4 | 498 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 499 | select MFD_CORE |
08b4c118 | 500 | depends on I2C=y |
2b247d06 | 501 | select REGMAP_I2C |
1d9f9f04 MB |
502 | help |
503 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 504 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
505 | the device, additional drivers must be enabled in order to use |
506 | the functionality of the device. | |
507 | ||
b11062b9 | 508 | config MFD_WM831X |
e5b48684 MB |
509 | bool |
510 | depends on GENERIC_HARDIRQS | |
511 | ||
512 | config MFD_WM831X_I2C | |
513 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 514 | select MFD_CORE |
e5b48684 | 515 | select MFD_WM831X |
1df5981b | 516 | select REGMAP_I2C |
cd99758b | 517 | select IRQ_DOMAIN |
8d002bdc | 518 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 519 | help |
e5b48684 MB |
520 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
521 | when controlled using I2C. This driver provides common support | |
522 | for accessing the device, additional drivers must be enabled in | |
523 | order to use the functionality of the device. | |
b11062b9 | 524 | |
2aa13b9e MB |
525 | config MFD_WM831X_SPI |
526 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
527 | select MFD_CORE | |
528 | select MFD_WM831X | |
1df5981b | 529 | select REGMAP_SPI |
cd99758b | 530 | select IRQ_DOMAIN |
2aa13b9e MB |
531 | depends on SPI_MASTER && GENERIC_HARDIRQS |
532 | help | |
533 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
534 | when controlled using SPI. This driver provides common support | |
535 | for accessing the device, additional drivers must be enabled in | |
536 | order to use the functionality of the device. | |
537 | ||
89b4012b | 538 | config MFD_WM8350 |
ecf926bc | 539 | bool |
8d002bdc | 540 | depends on GENERIC_HARDIRQS |
89b4012b MB |
541 | |
542 | config MFD_WM8350_CONFIG_MODE_0 | |
543 | bool | |
544 | depends on MFD_WM8350 | |
545 | ||
546 | config MFD_WM8350_CONFIG_MODE_1 | |
547 | bool | |
548 | depends on MFD_WM8350 | |
549 | ||
550 | config MFD_WM8350_CONFIG_MODE_2 | |
551 | bool | |
552 | depends on MFD_WM8350 | |
553 | ||
554 | config MFD_WM8350_CONFIG_MODE_3 | |
555 | bool | |
556 | depends on MFD_WM8350 | |
557 | ||
ca23f8c1 MB |
558 | config MFD_WM8351_CONFIG_MODE_0 |
559 | bool | |
560 | depends on MFD_WM8350 | |
561 | ||
562 | config MFD_WM8351_CONFIG_MODE_1 | |
563 | bool | |
564 | depends on MFD_WM8350 | |
565 | ||
566 | config MFD_WM8351_CONFIG_MODE_2 | |
567 | bool | |
568 | depends on MFD_WM8350 | |
569 | ||
570 | config MFD_WM8351_CONFIG_MODE_3 | |
571 | bool | |
572 | depends on MFD_WM8350 | |
573 | ||
96920630 MB |
574 | config MFD_WM8352_CONFIG_MODE_0 |
575 | bool | |
576 | depends on MFD_WM8350 | |
577 | ||
578 | config MFD_WM8352_CONFIG_MODE_1 | |
579 | bool | |
580 | depends on MFD_WM8350 | |
581 | ||
582 | config MFD_WM8352_CONFIG_MODE_2 | |
583 | bool | |
584 | depends on MFD_WM8350 | |
585 | ||
586 | config MFD_WM8352_CONFIG_MODE_3 | |
587 | bool | |
588 | depends on MFD_WM8350 | |
589 | ||
c661a0b9 | 590 | config MFD_WM8350_I2C |
ecf926bc | 591 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 592 | select MFD_WM8350 |
8d002bdc | 593 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
594 | help |
595 | The WM8350 is an integrated audio and power management | |
596 | subsystem with watchdog and RTC functionality for embedded | |
597 | systems. This option enables core support for the WM8350 with | |
598 | I2C as the control interface. Additional options must be | |
599 | selected to enable support for the functionality of the chip. | |
600 | ||
9e501086 | 601 | config MFD_WM8994 |
c9fbf7e0 | 602 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 603 | select MFD_CORE |
d6c645fc | 604 | select REGMAP_I2C |
8ab30691 | 605 | select REGMAP_IRQ |
c9fbf7e0 | 606 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
607 | help |
608 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
609 | smartphone applicatiosn. As well as audio functionality it | |
610 | has on board GPIO and regulator functionality which is | |
611 | supported via the relevant subsystems. This driver provides | |
612 | core support for the WM8994, in order to use the actual | |
613 | functionaltiy of the device other drivers must be enabled. | |
614 | ||
f52046b1 BR |
615 | config MFD_PCF50633 |
616 | tristate "Support for NXP PCF50633" | |
617 | depends on I2C | |
6e3ad118 | 618 | select REGMAP_I2C |
f52046b1 BR |
619 | help |
620 | Say yes here if you have NXP PCF50633 chip on your board. | |
621 | This core driver provides register access and IRQ handling | |
622 | facilities, and registers devices for the various functions | |
623 | so that function-specific drivers can bind to them. | |
624 | ||
1305134e AL |
625 | config PCF50633_ADC |
626 | tristate "Support for NXP PCF50633 ADC" | |
627 | depends on MFD_PCF50633 | |
628 | help | |
629 | Say yes here if you want to include support for ADC in the | |
630 | NXP PCF50633 chip. | |
631 | ||
632 | config PCF50633_GPIO | |
633 | tristate "Support for NXP PCF50633 GPIO" | |
634 | depends on MFD_PCF50633 | |
635 | help | |
636 | Say yes here if you want to include support GPIO for pins on | |
637 | the PCF50633 chip. | |
638 | ||
8238addc | 639 | config MFD_MC13783 |
8e005935 UKK |
640 | tristate |
641 | ||
642 | config MFD_MC13XXX | |
1cb3642a | 643 | tristate |
df3df646 | 644 | depends on SPI_MASTER || I2C |
8238addc | 645 | select MFD_CORE |
8e005935 | 646 | select MFD_MC13783 |
8238addc | 647 | help |
a0c7c1d4 MR |
648 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
649 | This driver provides common support for accessing the device, | |
8238addc SH |
650 | additional drivers must be enabled in order to use the |
651 | functionality of the device. | |
652 | ||
a0c7c1d4 | 653 | config MFD_MC13XXX_SPI |
1cb3642a MB |
654 | tristate "Freescale MC13783 and MC13892 SPI interface" |
655 | depends on SPI_MASTER | |
a0c7c1d4 | 656 | select REGMAP_SPI |
1cb3642a | 657 | select MFD_MC13XXX |
a0c7c1d4 MR |
658 | help |
659 | Select this if your MC13xxx is connected via an SPI bus. | |
660 | ||
df3df646 | 661 | config MFD_MC13XXX_I2C |
1cb3642a MB |
662 | tristate "Freescale MC13892 I2C interface" |
663 | depends on I2C | |
df3df646 | 664 | select REGMAP_I2C |
1cb3642a | 665 | select MFD_MC13XXX |
df3df646 MR |
666 | help |
667 | Select this if your MC13xxx is connected via an I2C bus. | |
668 | ||
fa661258 MW |
669 | config ABX500_CORE |
670 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 671 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
672 | help |
673 | Say yes here if you have the ABX500 Mixed Signal IC family | |
674 | chips. This core driver expose register access functions. | |
675 | Functionality specific drivers using these functions can | |
676 | remain unchanged when IC changes. Binding of the functions to | |
677 | actual register access is done by the IC core driver. | |
678 | ||
14fa5691 | 679 | config AB3100_CORE |
2071db48 | 680 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 681 | depends on I2C=y && ABX500_CORE |
8c96aefb | 682 | select MFD_CORE |
14fa5691 LW |
683 | default y if ARCH_U300 |
684 | help | |
685 | Select this to enable the AB3100 Mixed Signal IC core | |
686 | functionality. This connects to a AB3100 on the I2C bus | |
687 | and expose a number of symbols needed for dependent devices | |
688 | to read and write registers and subscribe to events from | |
689 | this multi-functional IC. This is needed to use other features | |
690 | of the AB3100 such as battery-backed RTC, charging control, | |
691 | LEDs, vibrator, system power and temperature, power management | |
692 | and ALSA sound. | |
693 | ||
12992dd8 LW |
694 | config AB3100_OTP |
695 | tristate "ST-Ericsson AB3100 OTP functions" | |
696 | depends on AB3100_CORE | |
697 | default y if AB3100_CORE | |
698 | help | |
699 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
700 | programmable memory) support. This exposes a sysfs file to read | |
701 | out OTP values. | |
702 | ||
13a09f93 DR |
703 | config EZX_PCAP |
704 | bool "PCAP Support" | |
705 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
706 | help | |
707 | This enables the PCAP ASIC present on EZX Phones. This is | |
708 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
709 | ||
62579266 RV |
710 | config AB8500_CORE |
711 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 712 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
62579266 | 713 | select MFD_CORE |
06e589ef | 714 | select IRQ_DOMAIN |
0c41839e | 715 | help |
62579266 | 716 | Select this option to enable access to AB8500 power management |
6680d940 SI |
717 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
718 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
719 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
720 | This chip embeds various other multimedia funtionalities as well. |
721 | ||
5814fc35 MW |
722 | config AB8500_DEBUG |
723 | bool "Enable debug info via debugfs" | |
724 | depends on AB8500_CORE && DEBUG_FS | |
725 | default y if DEBUG_FS | |
726 | help | |
727 | Select this option if you want debug information using the debug | |
728 | filesystem, debugfs. | |
dae2db30 AM |
729 | |
730 | config AB8500_GPADC | |
731 | bool "AB8500 GPADC driver" | |
732 | depends on AB8500_CORE && REGULATOR_AB8500 | |
733 | default y | |
734 | help | |
735 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 736 | |
650c2a21 LW |
737 | config MFD_DB8500_PRCMU |
738 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
739 | depends on UX500_SOC_DB8500 | |
740 | select MFD_CORE | |
741 | help | |
742 | Select this option to enable support for the DB8500 Power Reset | |
743 | and Control Management Unit. This is basically an autonomous | |
744 | system controller running an XP70 microprocessor, which is accessed | |
745 | through a register map. | |
746 | ||
f71e1afd AS |
747 | config MFD_CS5535 |
748 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
749 | select MFD_CORE | |
15b7cf14 | 750 | depends on PCI && X86 |
f71e1afd AS |
751 | ---help--- |
752 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
753 | necessary for using the board's GPIO and MFGPT functionality. | |
754 | ||
8edbede9 RR |
755 | config MFD_TIMBERDALE |
756 | tristate "Support for the Timberdale FPGA" | |
757 | select MFD_CORE | |
546e29b6 | 758 | depends on PCI && GPIOLIB |
8edbede9 RR |
759 | ---help--- |
760 | This is the core driver for the timberdale FPGA. This device is a | |
761 | multifunction device which exposes numerous platform devices. | |
762 | ||
763 | The timberdale FPGA can be found on the Intel Atom development board | |
764 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
765 | |
766 | config LPC_SCH | |
767 | tristate "Intel SCH LPC" | |
768 | depends on PCI | |
769 | select MFD_CORE | |
770 | help | |
771 | LPC bridge function of the Intel SCH provides support for | |
772 | System Management Bus and General Purpose I/O. | |
773 | ||
4630b130 AS |
774 | config LPC_ICH |
775 | tristate "Intel ICH LPC" | |
776 | depends on PCI | |
777 | select MFD_CORE | |
778 | help | |
779 | The LPC bridge function of the Intel ICH provides support for | |
780 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
781 | other drivers to control these functions, currently GPIO and |
782 | watchdog. | |
4630b130 | 783 | |
e090d506 FF |
784 | config MFD_RDC321X |
785 | tristate "Support for RDC-R321x southbridge" | |
786 | select MFD_CORE | |
787 | depends on PCI | |
788 | help | |
789 | Say yes here if you want to have support for the RDC R-321x SoC | |
790 | southbridge which provides access to GPIOs and Watchdog using the | |
791 | southbridge PCI device configuration space. | |
792 | ||
bd358132 IS |
793 | config MFD_JANZ_CMODIO |
794 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
795 | select MFD_CORE | |
796 | depends on PCI | |
797 | help | |
798 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
799 | carrier board. This device is a PCI to MODULbus bridge which may | |
800 | host many different types of MODULbus daughterboards, including | |
801 | CAN and GPIO controllers. | |
802 | ||
91f4debf | 803 | config MFD_JZ4740_ADC |
914e6d4e | 804 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 805 | select MFD_CORE |
914e6d4e | 806 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
807 | depends on MACH_JZ4740 |
808 | help | |
809 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
810 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
811 | ||
375fc77b DD |
812 | config MFD_VX855 |
813 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
814 | depends on PCI | |
815 | select MFD_CORE | |
816 | help | |
817 | Say yes here to enable support for various functions of the | |
818 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
819 | and/or vx855_gpio drivers for this to do anything useful. | |
820 | ||
383268a8 | 821 | config MFD_WL1273_CORE |
94fd5b74 | 822 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
823 | depends on I2C |
824 | select MFD_CORE | |
825 | default n | |
826 | help | |
827 | This is the core driver for the TI WL1273 FM radio. This MFD | |
828 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
829 | audio codec. | |
830 | ||
17cdd29d KM |
831 | config MFD_OMAP_USB_HOST |
832 | bool "Support OMAP USBHS core driver" | |
833 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 | |
834 | default y | |
835 | help | |
836 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
837 | This MFD driver does the required setup functionalities for | |
838 | OMAP USB Host drivers. | |
839 | ||
cbdb53e1 AD |
840 | config MFD_PM8XXX |
841 | tristate | |
842 | ||
843 | config MFD_PM8921_CORE | |
844 | tristate "Qualcomm PM8921 PMIC chip" | |
845 | depends on MSM_SSBI | |
846 | select MFD_CORE | |
847 | select MFD_PM8XXX | |
848 | help | |
849 | If you say yes to this option, support will be included for the | |
850 | built-in PM8921 PMIC chip. | |
851 | ||
852 | This is required if your board has a PM8921 and uses its features, | |
853 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
854 | ||
855 | Say M here if you want to include support for PM8921 chip as a module. | |
856 | This will build a module called "pm8921-core". | |
857 | ||
c013f0a5 AD |
858 | config MFD_PM8XXX_IRQ |
859 | bool "Support for Qualcomm PM8xxx IRQ features" | |
860 | depends on MFD_PM8XXX | |
861 | default y if MFD_PM8XXX | |
862 | help | |
863 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
864 | ||
865 | This is required to use certain other PM 8xxx features, such as GPIO | |
866 | and MPP. | |
867 | ||
8509e142 AL |
868 | config TPS65911_COMPARATOR |
869 | tristate | |
870 | ||
3c33be06 VB |
871 | config MFD_TPS65090 |
872 | bool "TPS65090 Power Management chips" | |
873 | depends on I2C=y && GENERIC_HARDIRQS | |
874 | select MFD_CORE | |
875 | select REGMAP_I2C | |
876 | help | |
877 | If you say yes here you get support for the TPS65090 series of | |
878 | Power Management chips. | |
879 | This driver provides common support for accessing the device, | |
880 | additional drivers must be enabled in order to use the | |
881 | functionality of the device. | |
882 | ||
09d6292b JP |
883 | config MFD_AAT2870_CORE |
884 | bool "Support for the AnalogicTech AAT2870" | |
885 | select MFD_CORE | |
886 | depends on I2C=y && GPIOLIB | |
887 | help | |
888 | If you say yes here you get support for the AAT2870. | |
889 | This driver provides common support for accessing the device, | |
890 | additional drivers must be enabled in order to use the | |
891 | functionality of the device. | |
892 | ||
1f5a371c MW |
893 | config MFD_INTEL_MSIC |
894 | bool "Support for Intel MSIC" | |
895 | depends on INTEL_SCU_IPC | |
896 | select MFD_CORE | |
897 | help | |
898 | Select this option to enable access to Intel MSIC (Avatele | |
899 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
900 | devices used in Intel Medfield platforms. | |
901 | ||
1b1247dd LD |
902 | config MFD_RC5T583 |
903 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 904 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
905 | select MFD_CORE |
906 | select REGMAP_I2C | |
907 | help | |
908 | Select this option to get support for the RICOH583 Power | |
909 | Management system device. | |
910 | This driver provides common support for accessing the device | |
911 | through i2c interface. The device supports multiple sub-devices | |
912 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
913 | Additional drivers must be enabled in order to use the | |
914 | different functionality of the device. | |
915 | ||
35bdd290 AR |
916 | config MFD_STA2X11 |
917 | bool "STA2X11 multi function device support" | |
918 | depends on STA2X11 | |
919 | select MFD_CORE | |
920 | ||
75060a1d YCLP |
921 | config MFD_ANATOP |
922 | bool "Support for Freescale i.MX on-chip ANATOP controller" | |
923 | depends on SOC_IMX6Q | |
924 | help | |
925 | Select this option to enable Freescale i.MX on-chip ANATOP | |
926 | MFD controller. This controller embeds regulator and | |
927 | thermal devices for Freescale i.MX platforms. | |
928 | ||
c948ef3a GG |
929 | config MFD_PALMAS |
930 | bool "Support for the TI Palmas series chips" | |
931 | select MFD_CORE | |
932 | select REGMAP_I2C | |
933 | select REGMAP_IRQ | |
934 | depends on I2C=y | |
935 | help | |
936 | If you say yes here you get support for the Palmas | |
937 | series of PMIC chips from Texas Instruments. | |
938 | ||
8a0a8e8e AB |
939 | endmenu |
940 | endif | |
b6d6454f | 941 | |
a4e137ab | 942 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 943 | depends on ARCH_SA1100 |
a4e137ab RK |
944 | |
945 | config MCP | |
946 | tristate | |
947 | ||
5e742ad6 RK |
948 | # Interface drivers |
949 | config MCP_SA11X0 | |
950 | tristate "Support SA11x0 MCP interface" | |
951 | depends on ARCH_SA1100 | |
952 | select MCP | |
953 | ||
05c45ca9 RK |
954 | # Chip drivers |
955 | config MCP_UCB1200 | |
a3364409 RK |
956 | bool "Support for UCB1200 / UCB1300" |
957 | depends on MCP_SA11X0 | |
958 | select MCP | |
05c45ca9 | 959 | |
acb45439 RK |
960 | config MCP_UCB1200_TS |
961 | tristate "Touchscreen interface support" | |
962 | depends on MCP_UCB1200 && INPUT | |
963 | ||
a4e137ab | 964 | endmenu |