Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DB |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
70c6cce0 QZ |
24 | config MFD_88PM800 |
25 | tristate "Support Marvell 88PM800" | |
26 | depends on I2C=y && GENERIC_HARDIRQS | |
27 | select REGMAP_I2C | |
28 | select REGMAP_IRQ | |
29 | select MFD_CORE | |
30 | help | |
31 | This supports for Marvell 88PM800 Power Management IC. | |
32 | This includes the I2C driver and the core APIs _only_, you have to | |
33 | select individual components like voltage regulators, RTC and | |
34 | battery-charger under the corresponding menus. | |
35 | ||
36 | config MFD_88PM805 | |
37 | tristate "Support Marvell 88PM805" | |
38 | depends on I2C=y && GENERIC_HARDIRQS | |
39 | select REGMAP_I2C | |
40 | select REGMAP_IRQ | |
41 | select MFD_CORE | |
42 | help | |
43 | This supports for Marvell 88PM805 Power Management IC. This includes | |
44 | the I2C driver and the core APIs _only_, you have to select individual | |
45 | components like codec device, headset/Mic device under the | |
46 | corresponding menus. | |
47 | ||
b6d6454f BD |
48 | config MFD_SM501 |
49 | tristate "Support for Silicon Motion SM501" | |
50 | ---help--- | |
51 | This is the core driver for the Silicon Motion SM501 multimedia | |
52 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
53 | provide numerous interfaces including USB host controller, USB gadget, |
54 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
55 | interface. The device may be connected by PCI or local bus with |
56 | varying functions enabled. | |
57 | ||
f61be273 BD |
58 | config MFD_SM501_GPIO |
59 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 60 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
61 | ---help--- |
62 | This option uses the gpio library layer to export the 64 GPIO | |
63 | lines on the SM501. The platform data is used to supply the | |
64 | base number for the first GPIO line to register. | |
65 | ||
fa9ff4b1 SO |
66 | config MFD_ASIC3 |
67 | bool "Support for Compaq ASIC3" | |
2eedd604 | 68 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 69 | select MFD_CORE |
fa9ff4b1 SO |
70 | ---help--- |
71 | This driver supports the ASIC3 multifunction chip found on many | |
72 | PDAs (mainly iPAQ and HTC based ones) | |
73 | ||
ca26308c MA |
74 | config MFD_DAVINCI_VOICECODEC |
75 | tristate | |
76 | select MFD_CORE | |
77 | ||
0931a4c6 DB |
78 | config MFD_DM355EVM_MSP |
79 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 80 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
81 | help |
82 | This driver supports the MSP430 microcontroller used on these | |
83 | boards. MSP430 firmware manages resets and power sequencing, | |
84 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
85 | ||
03df0f62 CC |
86 | config MFD_TI_SSP |
87 | tristate "TI Sequencer Serial Port support" | |
88 | depends on ARCH_DAVINCI_TNETV107X | |
89 | select MFD_CORE | |
90 | ---help--- | |
91 | Say Y here if you want support for the Sequencer Serial Port | |
92 | in a Texas Instruments TNETV107X SoC. | |
93 | ||
94 | To compile this driver as a module, choose M here: the | |
95 | module will be called ti-ssp. | |
96 | ||
a1635b8f PZ |
97 | config HTC_EGPIO |
98 | bool "HTC EGPIO support" | |
7444a72e | 99 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
100 | help |
101 | This driver supports the CPLD egpio chip present on | |
102 | several HTC phones. It provides basic support for input | |
103 | pins, output pins, and irqs. | |
104 | ||
5dc3339a PZ |
105 | config HTC_PASIC3 |
106 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 107 | select MFD_CORE |
5dc3339a PZ |
108 | help |
109 | This core driver provides register access for the LED/DS1WM | |
110 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
111 | HTC Magician devices, respectively. Actual functionality is | |
112 | handled by the leds-pasic3 and ds1wm drivers. | |
113 | ||
6048a3dd CM |
114 | config HTC_I2CPLD |
115 | bool "HTC I2C PLD chip support" | |
bef3e20c | 116 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
117 | help |
118 | If you say yes here you get support for the supposed CPLD | |
119 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
120 | This device provides input and output GPIOs through an I2C | |
121 | interface to one or more sub-chips. | |
122 | ||
d9105c2b MV |
123 | config UCB1400_CORE |
124 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 125 | depends on AC97_BUS |
5a49a540 | 126 | depends on GPIOLIB |
d9105c2b MV |
127 | help |
128 | This enables support for the Philips UCB1400 core functions. | |
129 | The UCB1400 is an AC97 audio codec. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called ucb1400_core. | |
133 | ||
16c5c023 JH |
134 | config MFD_LM3533 |
135 | tristate "LM3533 Lighting Power chip" | |
136 | depends on I2C | |
137 | select MFD_CORE | |
138 | select REGMAP_I2C | |
139 | help | |
140 | Say yes here to enable support for National Semiconductor / TI | |
141 | LM3533 Lighting Power chips. | |
142 | ||
143 | This driver provides common support for accessing the device; | |
144 | additional drivers must be enabled in order to use the LED, | |
145 | backlight or ambient-light-sensor functionality of the device. | |
146 | ||
798a8eee LW |
147 | config TPS6105X |
148 | tristate "TPS61050/61052 Boost Converters" | |
149 | depends on I2C | |
2edd3b69 | 150 | select REGULATOR |
fc498fa2 | 151 | select MFD_CORE |
2edd3b69 | 152 | select REGULATOR_FIXED_VOLTAGE |
798a8eee LW |
153 | help |
154 | This option enables a driver for the TP61050/TPS61052 | |
155 | high-power "white LED driver". This boost converter is | |
156 | sometimes used for other things than white LEDs, and | |
157 | also contains a GPIO pin. | |
158 | ||
87c13493 DB |
159 | config TPS65010 |
160 | tristate "TPS6501x Power Management chips" | |
161 | depends on I2C && GPIOLIB | |
162 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
163 | help | |
164 | If you say yes here you get support for the TPS6501x series of | |
165 | Power Management chips. These include voltage regulators, | |
166 | lithium ion/polymer battery charging, and other features that | |
167 | are often used in portable devices like cell phones and cameras. | |
168 | ||
169 | This driver can also be built as a module. If so, the module | |
170 | will be called tps65010. | |
171 | ||
31dd6a26 TF |
172 | config TPS6507X |
173 | tristate "TPS6507x Power Management / Touch Screen chips" | |
174 | select MFD_CORE | |
175 | depends on I2C | |
176 | help | |
177 | If you say yes here you get support for the TPS6507x series of | |
178 | Power Management / Touch Screen chips. These include voltage | |
179 | regulators, lithium ion/polymer battery charging, touch screen | |
180 | and other features that are often used in portable devices. | |
181 | This driver can also be built as a module. If so, the module | |
182 | will be called tps6507x. | |
183 | ||
d48f411c AC |
184 | config MFD_TPS65217 |
185 | tristate "TPS65217 Power Management / White LED chips" | |
186 | depends on I2C | |
187 | select MFD_CORE | |
188 | select REGMAP_I2C | |
189 | help | |
190 | If you say yes here you get support for the TPS65217 series of | |
191 | Power Management / White LED chips. | |
192 | These include voltage regulators, lithium ion/polymer battery | |
193 | charger, wled and other features that are often used in portable | |
194 | devices. | |
195 | ||
196 | This driver can also be built as a module. If so, the module | |
197 | will be called tps65217. | |
198 | ||
37df003c AL |
199 | config MFD_TPS6586X |
200 | bool "TPS6586x Power Management chips" | |
7a7487cb | 201 | depends on I2C=y && GENERIC_HARDIRQS |
37df003c | 202 | select MFD_CORE |
1176b5be | 203 | select REGMAP_I2C |
b4410a89 | 204 | depends on REGULATOR |
37df003c AL |
205 | help |
206 | If you say yes here you get support for the TPS6586X series of | |
207 | Power Management chips. | |
208 | This driver provides common support for accessing the device, | |
209 | additional drivers must be enabled in order to use the | |
210 | functionality of the device. | |
211 | ||
212 | This driver can also be built as a module. If so, the module | |
213 | will be called tps6586x. | |
214 | ||
54f323b1 LW |
215 | config MFD_TPS65910 |
216 | bool "TPS65910 Power Management chip" | |
217 | depends on I2C=y && GPIOLIB | |
218 | select MFD_CORE | |
dc9913a0 | 219 | select REGMAP_I2C |
21f7541d | 220 | select IRQ_DOMAIN |
54f323b1 LW |
221 | help |
222 | if you say yes here you get support for the TPS65910 series of | |
223 | Power Management chips. | |
224 | ||
36e52873 | 225 | config MFD_TPS65912 |
5608801b | 226 | bool |
36e52873 MO |
227 | depends on GPIOLIB |
228 | ||
229 | config MFD_TPS65912_I2C | |
231dd9c8 | 230 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
231 | select MFD_CORE |
232 | select MFD_TPS65912 | |
233 | depends on I2C=y && GPIOLIB | |
234 | help | |
235 | If you say yes here you get support for the TPS65912 series of | |
236 | PM chips with I2C interface. | |
237 | ||
238 | config MFD_TPS65912_SPI | |
239 | bool "TPS65912 Power Management chip with SPI" | |
240 | select MFD_CORE | |
241 | select MFD_TPS65912 | |
242 | depends on SPI_MASTER && GPIOLIB | |
243 | help | |
244 | If you say yes here you get support for the TPS65912 series of | |
245 | PM chips with SPI interface. | |
246 | ||
88e75cc3 DB |
247 | config MENELAUS |
248 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 249 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
250 | help |
251 | If you say yes here you get support for the Texas Instruments | |
252 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 253 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
254 | and other features that are often used in portable devices like |
255 | cell phones and PDAs. | |
256 | ||
a603a7fa | 257 | config TWL4030_CORE |
e8deb28c | 258 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 259 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 260 | select IRQ_DOMAIN |
a603a7fa | 261 | help |
e8deb28c | 262 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
263 | This core driver provides register access and IRQ handling |
264 | facilities, and registers devices for the various functions | |
265 | so that function-specific drivers can bind to them. | |
266 | ||
267 | These multi-function chips are found on many OMAP2 and OMAP3 | |
268 | boards, providing power management, RTC, GPIO, keypad, a | |
269 | high speed USB OTG transceiver, an audio codec (on most | |
270 | versions) and many other features. | |
271 | ||
f99c1d4f K |
272 | config TWL4030_MADC |
273 | tristate "Texas Instruments TWL4030 MADC" | |
274 | depends on TWL4030_CORE | |
275 | help | |
276 | This driver provides support for triton TWL4030-MADC. The | |
277 | driver supports both RT and SW conversion methods. | |
278 | ||
279 | This driver can be built as a module. If so it will be | |
280 | named twl4030-madc | |
281 | ||
ebf0bd36 AK |
282 | config TWL4030_POWER |
283 | bool "Support power resources on TWL4030 family chips" | |
284 | depends on TWL4030_CORE && ARM | |
285 | help | |
286 | Say yes here if you want to use the power resources on the | |
287 | TWL4030 family chips. Most of these resources are regulators, | |
288 | which have a separate driver; some are control signals, such | |
289 | as clock request handshaking. | |
290 | ||
291 | This driver uses board-specific data to initialize the resources | |
25985edc | 292 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
293 | or reset when a sleep, wakeup or warm reset event occurs. |
294 | ||
57fe7251 | 295 | config MFD_TWL4030_AUDIO |
0b83ddeb PU |
296 | bool |
297 | depends on TWL4030_CORE | |
298 | select MFD_CORE | |
299 | default n | |
300 | ||
f19b2823 | 301 | config TWL6040_CORE |
8eaeb939 PU |
302 | bool "Support for TWL6040 audio codec" |
303 | depends on I2C=y && GENERIC_HARDIRQS | |
f19b2823 | 304 | select MFD_CORE |
8eaeb939 | 305 | select REGMAP_I2C |
487bae3c | 306 | select IRQ_DOMAIN |
f19b2823 | 307 | default n |
8eaeb939 PU |
308 | help |
309 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
310 | codec. | |
311 | This driver provides common support for accessing the device, | |
312 | additional drivers must be enabled in order to use the | |
313 | functionality of the device (audio, vibra). | |
f19b2823 | 314 | |
27e34995 RV |
315 | config MFD_STMPE |
316 | bool "Support STMicroelectronics STMPE" | |
e789995d | 317 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
318 | select MFD_CORE |
319 | help | |
320 | Support for the STMPE family of I/O Expanders from | |
321 | STMicroelectronics. | |
322 | ||
323 | Currently supported devices are: | |
324 | ||
325 | STMPE811: GPIO, Touchscreen | |
326 | STMPE1601: GPIO, Keypad | |
327 | STMPE2401: GPIO, Keypad | |
328 | STMPE2403: GPIO, Keypad | |
329 | ||
330 | This driver provides common support for accessing the device, | |
331 | additional drivers must be enabled in order to use the functionality | |
332 | of the device. Currently available sub drivers are: | |
333 | ||
334 | GPIO: stmpe-gpio | |
335 | Keypad: stmpe-keypad | |
336 | Touchscreen: stmpe-ts | |
337 | ||
1a6e4b74 VK |
338 | menu "STMPE Interface Drivers" |
339 | depends on MFD_STMPE | |
340 | ||
341 | config STMPE_I2C | |
342 | bool "STMPE I2C Inteface" | |
eedea80f | 343 | depends on I2C=y |
1a6e4b74 VK |
344 | default y |
345 | help | |
346 | This is used to enable I2C interface of STMPE | |
e789995d VK |
347 | |
348 | config STMPE_SPI | |
349 | bool "STMPE SPI Inteface" | |
350 | depends on SPI_MASTER | |
351 | help | |
352 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
353 | endmenu |
354 | ||
f4e8afdc SI |
355 | config MFD_TC3589X |
356 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
357 | depends on I2C=y && GENERIC_HARDIRQS |
358 | select MFD_CORE | |
359 | help | |
f4e8afdc | 360 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
361 | |
362 | This driver provides common support for accessing the device, | |
363 | additional drivers must be enabled in order to use the | |
364 | functionality of the device. | |
365 | ||
1c2c30ac SO |
366 | config MFD_TMIO |
367 | bool | |
368 | default n | |
369 | ||
1f192015 IM |
370 | config MFD_T7L66XB |
371 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 372 | depends on ARM && HAVE_CLK |
1f192015 | 373 | select MFD_CORE |
1c2c30ac | 374 | select MFD_TMIO |
1f192015 IM |
375 | help |
376 | Support for Toshiba Mobile IO Controller T7L66XB | |
377 | ||
8284328c SP |
378 | config MFD_SMSC |
379 | bool "Support for the SMSC ECE1099 series chips" | |
380 | depends on I2C=y | |
381 | select MFD_CORE | |
382 | select REGMAP_I2C | |
383 | help | |
384 | If you say yes here you get support for the | |
385 | ece1099 chips from SMSC. | |
386 | ||
387 | To compile this driver as a module, choose M here: the | |
388 | module will be called smsc. | |
389 | ||
cbdfb426 IM |
390 | config MFD_TC6387XB |
391 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 392 | depends on ARM && HAVE_CLK |
cbdfb426 | 393 | select MFD_CORE |
1c2c30ac | 394 | select MFD_TMIO |
cbdfb426 IM |
395 | help |
396 | Support for Toshiba Mobile IO Controller TC6387XB | |
397 | ||
d6315949 DB |
398 | config MFD_TC6393XB |
399 | bool "Support Toshiba TC6393XB" | |
8f057d7b GR |
400 | depends on ARM && HAVE_CLK |
401 | select GPIOLIB | |
f024ff10 | 402 | select MFD_CORE |
1c2c30ac | 403 | select MFD_TMIO |
d6315949 DB |
404 | help |
405 | Support for Toshiba Mobile IO Controller TC6393XB | |
406 | ||
8e2eaabf SO |
407 | config PMIC_DA903X |
408 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
409 | depends on I2C=y | |
410 | help | |
411 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
412 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
413 | usually found on PXA processors-based platforms. This includes | |
414 | the I2C driver and the core APIs _only_, you have to select | |
415 | individual components like LCD backlight, voltage regulators, | |
416 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 417 | |
84c99db8 AJ |
418 | config PMIC_DA9052 |
419 | bool | |
420 | select MFD_CORE | |
421 | ||
cfe04478 AJ |
422 | config MFD_DA9052_SPI |
423 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
424 | select REGMAP_SPI | |
425 | select REGMAP_IRQ | |
426 | select PMIC_DA9052 | |
427 | depends on SPI_MASTER=y | |
428 | help | |
429 | Support for the Dialog Semiconductor DA9052 PMIC | |
430 | when controlled using SPI. This driver provides common support | |
431 | for accessing the device, additional drivers must be enabled in | |
432 | order to use the functionality of the device. | |
433 | ||
84c99db8 AJ |
434 | config MFD_DA9052_I2C |
435 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
436 | select REGMAP_I2C | |
437 | select REGMAP_IRQ | |
438 | select PMIC_DA9052 | |
439 | depends on I2C=y | |
440 | help | |
441 | Support for the Dialog Semiconductor DA9052 PMIC | |
442 | when controlled using I2C. This driver provides common support | |
443 | for accessing the device, additional drivers must be enabled in | |
444 | order to use the functionality of the device. | |
445 | ||
2896434c AJ |
446 | config MFD_DA9055 |
447 | bool "Dialog Semiconductor DA9055 PMIC Support" | |
448 | select REGMAP_I2C | |
449 | select REGMAP_IRQ | |
450 | select PMIC_DA9055 | |
451 | select MFD_CORE | |
452 | depends on I2C=y | |
453 | help | |
454 | Say yes here for support of Dialog Semiconductor DA9055. This is | |
455 | a Power Management IC. This driver provides common support for | |
456 | accessing the device as well as the I2C interface to the chip itself. | |
457 | Additional drivers must be enabled in order to use the functionality | |
458 | of the device. | |
459 | ||
460 | This driver can be built as a module. If built as a module it will be | |
461 | called "da9055" | |
462 | ||
a5736e0b MH |
463 | config PMIC_ADP5520 |
464 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
465 | depends on I2C=y | |
466 | help | |
467 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
468 | Multifunction Power Management IC. This includes | |
469 | the I2C driver and the core APIs _only_, you have to select | |
470 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
471 | under the corresponding menus. | |
8e2eaabf | 472 | |
eea6b7cc MK |
473 | config MFD_LP8788 |
474 | bool "Texas Instruments LP8788 Power Management Unit Driver" | |
475 | depends on I2C=y | |
476 | select MFD_CORE | |
477 | select REGMAP_I2C | |
478 | select IRQ_DOMAIN | |
479 | help | |
480 | TI LP8788 PMU supports regulators, battery charger, RTC, | |
481 | ADC, backlight driver and current sinks. | |
482 | ||
dae8a969 JL |
483 | config MFD_MAX77686 |
484 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
485 | depends on I2C=y && GENERIC_HARDIRQS | |
486 | select MFD_CORE | |
487 | select REGMAP_I2C | |
488 | select IRQ_DOMAIN | |
489 | help | |
490 | Say yes here to support for Maxim Semiconductor MAX77686. | |
491 | This is a Power Management IC with RTC on chip. | |
492 | This driver provides common support for accessing the device; | |
493 | additional drivers must be enabled in order to use the functionality | |
494 | of the device. | |
495 | ||
83871c00 CC |
496 | config MFD_MAX77693 |
497 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
498 | depends on I2C=y && GENERIC_HARDIRQS | |
499 | select MFD_CORE | |
29f772d4 | 500 | select REGMAP_I2C |
83871c00 CC |
501 | help |
502 | Say yes here to support for Maxim Semiconductor MAX77693. | |
503 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
504 | and MUIC(Micro USB Interface Controller) controls on chip. | |
505 | This driver provides common support for accessing the device; | |
506 | additional drivers must be enabled in order to use the functionality | |
507 | of the device. | |
508 | ||
a91d2f8d GY |
509 | config MFD_MAX8907 |
510 | tristate "Maxim Semiconductor MAX8907 PMIC Support" | |
511 | select MFD_CORE | |
512 | depends on I2C=y && GENERIC_HARDIRQS | |
513 | select REGMAP_I2C | |
514 | select REGMAP_IRQ | |
515 | help | |
516 | Say yes here to support for Maxim Semiconductor MAX8907. This is | |
517 | a Power Management IC. This driver provides common support for | |
518 | accessing the device; additional drivers must be enabled in order | |
519 | to use the functionality of the device. | |
520 | ||
d50f8f33 | 521 | config MFD_MAX8925 |
1f1cf8f9 | 522 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 523 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 524 | select MFD_CORE |
d50f8f33 HZ |
525 | help |
526 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 527 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
528 | accessing the device, additional drivers must be enabled in order |
529 | to use the functionality of the device. | |
530 | ||
527e7e9a MH |
531 | config MFD_MAX8997 |
532 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
533 | depends on I2C=y && GENERIC_HARDIRQS | |
534 | select MFD_CORE | |
b41511f7 | 535 | select IRQ_DOMAIN |
527e7e9a | 536 | help |
5a924d13 | 537 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
538 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
539 | MUIC controls on chip. | |
d7e8c01a | 540 | This driver provides common support for accessing the device; |
527e7e9a MH |
541 | additional drivers must be enabled in order to use the functionality |
542 | of the device. | |
543 | ||
156f2528 | 544 | config MFD_MAX8998 |
f8539ddc | 545 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 546 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
547 | select MFD_CORE |
548 | help | |
f8539ddc KP |
549 | Say yes here to support for Maxim Semiconductor MAX8998 and |
550 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 551 | This driver provides common support for accessing the device, |
f8539ddc KP |
552 | additional drivers must be enabled in order to use the functionality |
553 | of the device. | |
156f2528 | 554 | |
66c9fbb9 SK |
555 | config MFD_SEC_CORE |
556 | bool "SAMSUNG Electronics PMIC Series Support" | |
c3d4d697 SK |
557 | depends on I2C=y && GENERIC_HARDIRQS |
558 | select MFD_CORE | |
559 | select REGMAP_I2C | |
6445b84a | 560 | select REGMAP_IRQ |
c3d4d697 | 561 | help |
66c9fbb9 | 562 | Support for the Samsung Electronics MFD series. |
6b2aac42 | 563 | This driver provides common support for accessing the device, |
c3d4d697 SK |
564 | additional drivers must be enabled in order to use the functionality |
565 | of the device | |
566 | ||
3afbac95 | 567 | config MFD_ARIZONA |
14b5bd5c | 568 | select REGMAP |
78948c17 | 569 | select REGMAP_IRQ |
c481c048 | 570 | select MFD_CORE |
49003a68 | 571 | bool |
3afbac95 MB |
572 | |
573 | config MFD_ARIZONA_I2C | |
574 | tristate "Support Wolfson Microelectronics Arizona platform with I2C" | |
575 | select MFD_ARIZONA | |
576 | select MFD_CORE | |
577 | select REGMAP_I2C | |
578 | depends on I2C | |
579 | help | |
580 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
581 | core functionality controlled via I2C. | |
582 | ||
583 | config MFD_ARIZONA_SPI | |
584 | tristate "Support Wolfson Microelectronics Arizona platform with SPI" | |
585 | select MFD_ARIZONA | |
586 | select MFD_CORE | |
587 | select REGMAP_SPI | |
588 | depends on SPI_MASTER | |
589 | help | |
590 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
591 | core functionality controlled via I2C. | |
592 | ||
593 | config MFD_WM5102 | |
594 | bool "Support Wolfson Microelectronics WM5102" | |
595 | depends on MFD_ARIZONA | |
596 | help | |
597 | Support for Wolfson Microelectronics WM5102 low power audio SoC | |
598 | ||
e102befe MB |
599 | config MFD_WM5110 |
600 | bool "Support Wolfson Microelectronics WM5110" | |
601 | depends on MFD_ARIZONA | |
602 | help | |
603 | Support for Wolfson Microelectronics WM5110 low power audio SoC | |
604 | ||
1d9f9f04 | 605 | config MFD_WM8400 |
eee0e4b4 | 606 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 607 | select MFD_CORE |
08b4c118 | 608 | depends on I2C=y |
2b247d06 | 609 | select REGMAP_I2C |
1d9f9f04 MB |
610 | help |
611 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 612 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
613 | the device, additional drivers must be enabled in order to use |
614 | the functionality of the device. | |
615 | ||
b11062b9 | 616 | config MFD_WM831X |
e5b48684 MB |
617 | bool |
618 | depends on GENERIC_HARDIRQS | |
619 | ||
620 | config MFD_WM831X_I2C | |
621 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 622 | select MFD_CORE |
e5b48684 | 623 | select MFD_WM831X |
1df5981b | 624 | select REGMAP_I2C |
cd99758b | 625 | select IRQ_DOMAIN |
8d002bdc | 626 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 627 | help |
e5b48684 MB |
628 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
629 | when controlled using I2C. This driver provides common support | |
630 | for accessing the device, additional drivers must be enabled in | |
631 | order to use the functionality of the device. | |
b11062b9 | 632 | |
2aa13b9e MB |
633 | config MFD_WM831X_SPI |
634 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
635 | select MFD_CORE | |
636 | select MFD_WM831X | |
1df5981b | 637 | select REGMAP_SPI |
cd99758b | 638 | select IRQ_DOMAIN |
2aa13b9e MB |
639 | depends on SPI_MASTER && GENERIC_HARDIRQS |
640 | help | |
641 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
642 | when controlled using SPI. This driver provides common support | |
643 | for accessing the device, additional drivers must be enabled in | |
644 | order to use the functionality of the device. | |
645 | ||
89b4012b | 646 | config MFD_WM8350 |
ecf926bc | 647 | bool |
8d002bdc | 648 | depends on GENERIC_HARDIRQS |
89b4012b MB |
649 | |
650 | config MFD_WM8350_CONFIG_MODE_0 | |
651 | bool | |
652 | depends on MFD_WM8350 | |
653 | ||
654 | config MFD_WM8350_CONFIG_MODE_1 | |
655 | bool | |
656 | depends on MFD_WM8350 | |
657 | ||
658 | config MFD_WM8350_CONFIG_MODE_2 | |
659 | bool | |
660 | depends on MFD_WM8350 | |
661 | ||
662 | config MFD_WM8350_CONFIG_MODE_3 | |
663 | bool | |
664 | depends on MFD_WM8350 | |
665 | ||
ca23f8c1 MB |
666 | config MFD_WM8351_CONFIG_MODE_0 |
667 | bool | |
668 | depends on MFD_WM8350 | |
669 | ||
670 | config MFD_WM8351_CONFIG_MODE_1 | |
671 | bool | |
672 | depends on MFD_WM8350 | |
673 | ||
674 | config MFD_WM8351_CONFIG_MODE_2 | |
675 | bool | |
676 | depends on MFD_WM8350 | |
677 | ||
678 | config MFD_WM8351_CONFIG_MODE_3 | |
679 | bool | |
680 | depends on MFD_WM8350 | |
681 | ||
96920630 MB |
682 | config MFD_WM8352_CONFIG_MODE_0 |
683 | bool | |
684 | depends on MFD_WM8350 | |
685 | ||
686 | config MFD_WM8352_CONFIG_MODE_1 | |
687 | bool | |
688 | depends on MFD_WM8350 | |
689 | ||
690 | config MFD_WM8352_CONFIG_MODE_2 | |
691 | bool | |
692 | depends on MFD_WM8350 | |
693 | ||
694 | config MFD_WM8352_CONFIG_MODE_3 | |
695 | bool | |
696 | depends on MFD_WM8350 | |
697 | ||
c661a0b9 | 698 | config MFD_WM8350_I2C |
ecf926bc | 699 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 700 | select MFD_WM8350 |
8d002bdc | 701 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
702 | help |
703 | The WM8350 is an integrated audio and power management | |
704 | subsystem with watchdog and RTC functionality for embedded | |
705 | systems. This option enables core support for the WM8350 with | |
706 | I2C as the control interface. Additional options must be | |
707 | selected to enable support for the functionality of the chip. | |
708 | ||
9e501086 | 709 | config MFD_WM8994 |
c9fbf7e0 | 710 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 711 | select MFD_CORE |
d6c645fc | 712 | select REGMAP_I2C |
8ab30691 | 713 | select REGMAP_IRQ |
c9fbf7e0 | 714 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
715 | help |
716 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
717 | smartphone applicatiosn. As well as audio functionality it | |
718 | has on board GPIO and regulator functionality which is | |
719 | supported via the relevant subsystems. This driver provides | |
720 | core support for the WM8994, in order to use the actual | |
721 | functionaltiy of the device other drivers must be enabled. | |
722 | ||
f52046b1 BR |
723 | config MFD_PCF50633 |
724 | tristate "Support for NXP PCF50633" | |
725 | depends on I2C | |
6e3ad118 | 726 | select REGMAP_I2C |
f52046b1 BR |
727 | help |
728 | Say yes here if you have NXP PCF50633 chip on your board. | |
729 | This core driver provides register access and IRQ handling | |
730 | facilities, and registers devices for the various functions | |
731 | so that function-specific drivers can bind to them. | |
732 | ||
1305134e AL |
733 | config PCF50633_ADC |
734 | tristate "Support for NXP PCF50633 ADC" | |
735 | depends on MFD_PCF50633 | |
736 | help | |
737 | Say yes here if you want to include support for ADC in the | |
738 | NXP PCF50633 chip. | |
739 | ||
740 | config PCF50633_GPIO | |
741 | tristate "Support for NXP PCF50633 GPIO" | |
742 | depends on MFD_PCF50633 | |
743 | help | |
744 | Say yes here if you want to include support GPIO for pins on | |
745 | the PCF50633 chip. | |
746 | ||
8238addc | 747 | config MFD_MC13783 |
8e005935 UKK |
748 | tristate |
749 | ||
750 | config MFD_MC13XXX | |
1cb3642a | 751 | tristate |
df3df646 | 752 | depends on SPI_MASTER || I2C |
8238addc | 753 | select MFD_CORE |
8e005935 | 754 | select MFD_MC13783 |
8238addc | 755 | help |
a0c7c1d4 MR |
756 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
757 | This driver provides common support for accessing the device, | |
8238addc SH |
758 | additional drivers must be enabled in order to use the |
759 | functionality of the device. | |
760 | ||
a0c7c1d4 | 761 | config MFD_MC13XXX_SPI |
1cb3642a MB |
762 | tristate "Freescale MC13783 and MC13892 SPI interface" |
763 | depends on SPI_MASTER | |
a0c7c1d4 | 764 | select REGMAP_SPI |
1cb3642a | 765 | select MFD_MC13XXX |
a0c7c1d4 MR |
766 | help |
767 | Select this if your MC13xxx is connected via an SPI bus. | |
768 | ||
df3df646 | 769 | config MFD_MC13XXX_I2C |
1cb3642a MB |
770 | tristate "Freescale MC13892 I2C interface" |
771 | depends on I2C | |
df3df646 | 772 | select REGMAP_I2C |
1cb3642a | 773 | select MFD_MC13XXX |
df3df646 MR |
774 | help |
775 | Select this if your MC13xxx is connected via an I2C bus. | |
776 | ||
fa661258 MW |
777 | config ABX500_CORE |
778 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 779 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
780 | help |
781 | Say yes here if you have the ABX500 Mixed Signal IC family | |
782 | chips. This core driver expose register access functions. | |
783 | Functionality specific drivers using these functions can | |
784 | remain unchanged when IC changes. Binding of the functions to | |
785 | actual register access is done by the IC core driver. | |
786 | ||
14fa5691 | 787 | config AB3100_CORE |
2071db48 | 788 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 789 | depends on I2C=y && ABX500_CORE |
8c96aefb | 790 | select MFD_CORE |
14fa5691 LW |
791 | default y if ARCH_U300 |
792 | help | |
793 | Select this to enable the AB3100 Mixed Signal IC core | |
794 | functionality. This connects to a AB3100 on the I2C bus | |
795 | and expose a number of symbols needed for dependent devices | |
796 | to read and write registers and subscribe to events from | |
797 | this multi-functional IC. This is needed to use other features | |
798 | of the AB3100 such as battery-backed RTC, charging control, | |
799 | LEDs, vibrator, system power and temperature, power management | |
800 | and ALSA sound. | |
801 | ||
12992dd8 LW |
802 | config AB3100_OTP |
803 | tristate "ST-Ericsson AB3100 OTP functions" | |
804 | depends on AB3100_CORE | |
805 | default y if AB3100_CORE | |
806 | help | |
807 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
808 | programmable memory) support. This exposes a sysfs file to read | |
809 | out OTP values. | |
810 | ||
13a09f93 DR |
811 | config EZX_PCAP |
812 | bool "PCAP Support" | |
813 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
814 | help | |
815 | This enables the PCAP ASIC present on EZX Phones. This is | |
816 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
817 | ||
62579266 RV |
818 | config AB8500_CORE |
819 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 820 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
62579266 | 821 | select MFD_CORE |
06e589ef | 822 | select IRQ_DOMAIN |
0c41839e | 823 | help |
62579266 | 824 | Select this option to enable access to AB8500 power management |
6680d940 SI |
825 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
826 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
827 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
828 | This chip embeds various other multimedia funtionalities as well. |
829 | ||
5814fc35 MW |
830 | config AB8500_DEBUG |
831 | bool "Enable debug info via debugfs" | |
832 | depends on AB8500_CORE && DEBUG_FS | |
833 | default y if DEBUG_FS | |
834 | help | |
835 | Select this option if you want debug information using the debug | |
836 | filesystem, debugfs. | |
dae2db30 AM |
837 | |
838 | config AB8500_GPADC | |
839 | bool "AB8500 GPADC driver" | |
840 | depends on AB8500_CORE && REGULATOR_AB8500 | |
841 | default y | |
842 | help | |
843 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 844 | |
650c2a21 LW |
845 | config MFD_DB8500_PRCMU |
846 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
847 | depends on UX500_SOC_DB8500 | |
848 | select MFD_CORE | |
849 | help | |
850 | Select this option to enable support for the DB8500 Power Reset | |
851 | and Control Management Unit. This is basically an autonomous | |
852 | system controller running an XP70 microprocessor, which is accessed | |
853 | through a register map. | |
854 | ||
f71e1afd AS |
855 | config MFD_CS5535 |
856 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
857 | select MFD_CORE | |
15b7cf14 | 858 | depends on PCI && X86 |
f71e1afd AS |
859 | ---help--- |
860 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
861 | necessary for using the board's GPIO and MFGPT functionality. | |
862 | ||
8edbede9 RR |
863 | config MFD_TIMBERDALE |
864 | tristate "Support for the Timberdale FPGA" | |
865 | select MFD_CORE | |
546e29b6 | 866 | depends on PCI && GPIOLIB |
8edbede9 RR |
867 | ---help--- |
868 | This is the core driver for the timberdale FPGA. This device is a | |
869 | multifunction device which exposes numerous platform devices. | |
870 | ||
871 | The timberdale FPGA can be found on the Intel Atom development board | |
872 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
873 | |
874 | config LPC_SCH | |
875 | tristate "Intel SCH LPC" | |
876 | depends on PCI | |
877 | select MFD_CORE | |
878 | help | |
879 | LPC bridge function of the Intel SCH provides support for | |
880 | System Management Bus and General Purpose I/O. | |
881 | ||
4630b130 AS |
882 | config LPC_ICH |
883 | tristate "Intel ICH LPC" | |
884 | depends on PCI | |
885 | select MFD_CORE | |
886 | help | |
887 | The LPC bridge function of the Intel ICH provides support for | |
888 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
889 | other drivers to control these functions, currently GPIO and |
890 | watchdog. | |
4630b130 | 891 | |
e090d506 FF |
892 | config MFD_RDC321X |
893 | tristate "Support for RDC-R321x southbridge" | |
894 | select MFD_CORE | |
895 | depends on PCI | |
896 | help | |
897 | Say yes here if you want to have support for the RDC R-321x SoC | |
898 | southbridge which provides access to GPIOs and Watchdog using the | |
899 | southbridge PCI device configuration space. | |
900 | ||
bd358132 IS |
901 | config MFD_JANZ_CMODIO |
902 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
903 | select MFD_CORE | |
904 | depends on PCI | |
905 | help | |
906 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
907 | carrier board. This device is a PCI to MODULbus bridge which may | |
908 | host many different types of MODULbus daughterboards, including | |
909 | CAN and GPIO controllers. | |
910 | ||
91f4debf | 911 | config MFD_JZ4740_ADC |
914e6d4e | 912 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 913 | select MFD_CORE |
914e6d4e | 914 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
915 | depends on MACH_JZ4740 |
916 | help | |
917 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
918 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
919 | ||
375fc77b DD |
920 | config MFD_VX855 |
921 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
922 | depends on PCI | |
923 | select MFD_CORE | |
924 | help | |
925 | Say yes here to enable support for various functions of the | |
926 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
927 | and/or vx855_gpio drivers for this to do anything useful. | |
928 | ||
383268a8 | 929 | config MFD_WL1273_CORE |
94fd5b74 | 930 | tristate "Support for TI WL1273 FM radio." |
383268a8 MA |
931 | depends on I2C |
932 | select MFD_CORE | |
933 | default n | |
934 | help | |
935 | This is the core driver for the TI WL1273 FM radio. This MFD | |
936 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
937 | audio codec. | |
938 | ||
17cdd29d | 939 | config MFD_OMAP_USB_HOST |
16fa3dc7 | 940 | bool "Support OMAP USBHS core and TLL driver" |
17cdd29d KM |
941 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 |
942 | default y | |
943 | help | |
944 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
945 | This MFD driver does the required setup functionalities for | |
946 | OMAP USB Host drivers. | |
947 | ||
cbdb53e1 AD |
948 | config MFD_PM8XXX |
949 | tristate | |
950 | ||
951 | config MFD_PM8921_CORE | |
952 | tristate "Qualcomm PM8921 PMIC chip" | |
953 | depends on MSM_SSBI | |
954 | select MFD_CORE | |
955 | select MFD_PM8XXX | |
956 | help | |
957 | If you say yes to this option, support will be included for the | |
958 | built-in PM8921 PMIC chip. | |
959 | ||
960 | This is required if your board has a PM8921 and uses its features, | |
961 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
962 | ||
963 | Say M here if you want to include support for PM8921 chip as a module. | |
964 | This will build a module called "pm8921-core". | |
965 | ||
c013f0a5 AD |
966 | config MFD_PM8XXX_IRQ |
967 | bool "Support for Qualcomm PM8xxx IRQ features" | |
968 | depends on MFD_PM8XXX | |
969 | default y if MFD_PM8XXX | |
970 | help | |
971 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
972 | ||
973 | This is required to use certain other PM 8xxx features, such as GPIO | |
974 | and MPP. | |
975 | ||
8509e142 AL |
976 | config TPS65911_COMPARATOR |
977 | tristate | |
978 | ||
3c33be06 VB |
979 | config MFD_TPS65090 |
980 | bool "TPS65090 Power Management chips" | |
981 | depends on I2C=y && GENERIC_HARDIRQS | |
982 | select MFD_CORE | |
983 | select REGMAP_I2C | |
984 | help | |
985 | If you say yes here you get support for the TPS65090 series of | |
986 | Power Management chips. | |
987 | This driver provides common support for accessing the device, | |
988 | additional drivers must be enabled in order to use the | |
989 | functionality of the device. | |
990 | ||
09d6292b JP |
991 | config MFD_AAT2870_CORE |
992 | bool "Support for the AnalogicTech AAT2870" | |
993 | select MFD_CORE | |
994 | depends on I2C=y && GPIOLIB | |
995 | help | |
996 | If you say yes here you get support for the AAT2870. | |
997 | This driver provides common support for accessing the device, | |
998 | additional drivers must be enabled in order to use the | |
999 | functionality of the device. | |
1000 | ||
1f5a371c MW |
1001 | config MFD_INTEL_MSIC |
1002 | bool "Support for Intel MSIC" | |
1003 | depends on INTEL_SCU_IPC | |
1004 | select MFD_CORE | |
1005 | help | |
1006 | Select this option to enable access to Intel MSIC (Avatele | |
1007 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
1008 | devices used in Intel Medfield platforms. | |
1009 | ||
1b1247dd LD |
1010 | config MFD_RC5T583 |
1011 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 1012 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
1013 | select MFD_CORE |
1014 | select REGMAP_I2C | |
1015 | help | |
1016 | Select this option to get support for the RICOH583 Power | |
1017 | Management system device. | |
1018 | This driver provides common support for accessing the device | |
1019 | through i2c interface. The device supports multiple sub-devices | |
1020 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
1021 | Additional drivers must be enabled in order to use the | |
1022 | different functionality of the device. | |
1023 | ||
35bdd290 AR |
1024 | config MFD_STA2X11 |
1025 | bool "STA2X11 multi function device support" | |
1026 | depends on STA2X11 | |
1027 | select MFD_CORE | |
1028 | ||
87d68730 DA |
1029 | config MFD_SYSCON |
1030 | bool "System Controller Register R/W Based on Regmap" | |
1031 | depends on OF | |
1032 | select REGMAP_MMIO | |
75060a1d | 1033 | help |
87d68730 DA |
1034 | Select this option to enable accessing system control registers |
1035 | via regmap. | |
75060a1d | 1036 | |
c948ef3a GG |
1037 | config MFD_PALMAS |
1038 | bool "Support for the TI Palmas series chips" | |
1039 | select MFD_CORE | |
1040 | select REGMAP_I2C | |
1041 | select REGMAP_IRQ | |
1042 | depends on I2C=y | |
1043 | help | |
1044 | If you say yes here you get support for the Palmas | |
1045 | series of PMIC chips from Texas Instruments. | |
1046 | ||
8a0a8e8e AB |
1047 | endmenu |
1048 | endif | |
b6d6454f | 1049 | |
a4e137ab | 1050 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 1051 | depends on ARCH_SA1100 |
a4e137ab RK |
1052 | |
1053 | config MCP | |
1054 | tristate | |
1055 | ||
5e742ad6 RK |
1056 | # Interface drivers |
1057 | config MCP_SA11X0 | |
1058 | tristate "Support SA11x0 MCP interface" | |
1059 | depends on ARCH_SA1100 | |
1060 | select MCP | |
1061 | ||
05c45ca9 RK |
1062 | # Chip drivers |
1063 | config MCP_UCB1200 | |
a3364409 RK |
1064 | bool "Support for UCB1200 / UCB1300" |
1065 | depends on MCP_SA11X0 | |
1066 | select MCP | |
05c45ca9 | 1067 | |
acb45439 RK |
1068 | config MCP_UCB1200_TS |
1069 | tristate "Touchscreen interface support" | |
1070 | depends on MCP_UCB1200 && INPUT | |
1071 | ||
a4e137ab | 1072 | endmenu |