Commit | Line | Data |
---|---|---|
243eabcf MED |
1 | /* |
2 | * linux/drivers/message/fusion/mptspi.c | |
3 | * For use with LSI Logic PCI chip/adapter(s) | |
4 | * running LSI Logic Fusion MPT (Message Passing Technology) firmware. | |
5 | * | |
9f4203b3 | 6 | * Copyright (c) 1999-2007 LSI Logic Corporation |
243eabcf MED |
7 | * (mailto:mpt_linux_developer@lsil.com) |
8 | * | |
9 | */ | |
10 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
11 | /* | |
12 | This program is free software; you can redistribute it and/or modify | |
13 | it under the terms of the GNU General Public License as published by | |
14 | the Free Software Foundation; version 2 of the License. | |
15 | ||
16 | This program is distributed in the hope that it will be useful, | |
17 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | GNU General Public License for more details. | |
20 | ||
21 | NO WARRANTY | |
22 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
23 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
24 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
25 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
26 | solely responsible for determining the appropriateness of using and | |
27 | distributing the Program and assumes all risks associated with its | |
28 | exercise of rights under this Agreement, including but not limited to | |
29 | the risks and costs of program errors, damage to or loss of data, | |
30 | programs or equipment, and unavailability or interruption of operations. | |
31 | ||
32 | DISCLAIMER OF LIABILITY | |
33 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
34 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
35 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
36 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
37 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
38 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
39 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
40 | ||
41 | You should have received a copy of the GNU General Public License | |
42 | along with this program; if not, write to the Free Software | |
43 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
44 | */ | |
45 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
46 | ||
47 | #include "linux_compat.h" /* linux-2.6 tweaks */ | |
48 | #include <linux/module.h> | |
49 | #include <linux/kernel.h> | |
50 | #include <linux/init.h> | |
51 | #include <linux/errno.h> | |
52 | #include <linux/kdev_t.h> | |
53 | #include <linux/blkdev.h> | |
54 | #include <linux/delay.h> /* for mdelay */ | |
55 | #include <linux/interrupt.h> /* needed for in_interrupt() proto */ | |
56 | #include <linux/reboot.h> /* notifier code */ | |
57 | #include <linux/sched.h> | |
58 | #include <linux/workqueue.h> | |
c92f222e | 59 | #include <linux/raid_class.h> |
243eabcf MED |
60 | |
61 | #include <scsi/scsi.h> | |
62 | #include <scsi/scsi_cmnd.h> | |
63 | #include <scsi/scsi_device.h> | |
64 | #include <scsi/scsi_host.h> | |
65 | #include <scsi/scsi_tcq.h> | |
c92f222e JB |
66 | #include <scsi/scsi_transport.h> |
67 | #include <scsi/scsi_transport_spi.h> | |
243eabcf MED |
68 | |
69 | #include "mptbase.h" | |
70 | #include "mptscsih.h" | |
71 | ||
72 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
73 | #define my_NAME "Fusion MPT SPI Host driver" | |
74 | #define my_VERSION MPT_LINUX_VERSION_COMMON | |
75 | #define MYNAM "mptspi" | |
76 | ||
77 | MODULE_AUTHOR(MODULEAUTHOR); | |
78 | MODULE_DESCRIPTION(my_NAME); | |
79 | MODULE_LICENSE("GPL"); | |
9f4203b3 | 80 | MODULE_VERSION(my_VERSION); |
243eabcf MED |
81 | |
82 | /* Command line args */ | |
243eabcf MED |
83 | static int mpt_saf_te = MPTSCSIH_SAF_TE; |
84 | module_param(mpt_saf_te, int, 0); | |
85 | MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); | |
86 | ||
c92f222e JB |
87 | static void mptspi_write_offset(struct scsi_target *, int); |
88 | static void mptspi_write_width(struct scsi_target *, int); | |
89 | static int mptspi_write_spi_device_pg1(struct scsi_target *, | |
90 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *); | |
91 | ||
92 | static struct scsi_transport_template *mptspi_transport_template = NULL; | |
93 | ||
243eabcf MED |
94 | static int mptspiDoneCtx = -1; |
95 | static int mptspiTaskCtx = -1; | |
96 | static int mptspiInternalCtx = -1; /* Used only for internal commands */ | |
97 | ||
5a9c47b1 EM |
98 | /** |
99 | * mptspi_setTargetNegoParms - Update the target negotiation | |
100 | * parameters based on the the Inquiry data, adapter capabilities, | |
101 | * and NVRAM settings | |
102 | * | |
103 | * @hd: Pointer to a SCSI Host Structure | |
104 | * @vtarget: per target private data | |
105 | * @sdev: SCSI device | |
106 | * | |
107 | **/ | |
108 | static void | |
109 | mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, | |
110 | struct scsi_device *sdev) | |
111 | { | |
112 | SpiCfgData *pspi_data = &hd->ioc->spi_data; | |
113 | int id = (int) target->id; | |
114 | int nvram; | |
115 | u8 width = MPT_NARROW; | |
116 | u8 factor = MPT_ASYNC; | |
117 | u8 offset = 0; | |
118 | u8 nfactor; | |
119 | u8 noQas = 1; | |
120 | ||
121 | target->negoFlags = pspi_data->noQas; | |
122 | ||
123 | if (sdev->scsi_level < SCSI_2) { | |
124 | width = 0; | |
125 | factor = MPT_ULTRA2; | |
126 | offset = pspi_data->maxSyncOffset; | |
127 | target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; | |
128 | } else { | |
129 | if (scsi_device_wide(sdev)) | |
130 | width = 1; | |
131 | ||
132 | if (scsi_device_sync(sdev)) { | |
133 | factor = pspi_data->minSyncFactor; | |
134 | if (!scsi_device_dt(sdev)) | |
135 | factor = MPT_ULTRA2; | |
136 | else { | |
137 | if (!scsi_device_ius(sdev) && | |
138 | !scsi_device_qas(sdev)) | |
139 | factor = MPT_ULTRA160; | |
140 | else { | |
141 | factor = MPT_ULTRA320; | |
142 | if (scsi_device_qas(sdev)) { | |
143 | ddvprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id)); | |
144 | noQas = 0; | |
145 | } | |
146 | if (sdev->type == TYPE_TAPE && | |
147 | scsi_device_ius(sdev)) | |
148 | target->negoFlags |= MPT_TAPE_NEGO_IDP; | |
149 | } | |
150 | } | |
151 | offset = pspi_data->maxSyncOffset; | |
152 | ||
153 | /* If RAID, never disable QAS | |
154 | * else if non RAID, do not disable | |
155 | * QAS if bit 1 is set | |
156 | * bit 1 QAS support, non-raid only | |
157 | * bit 0 IU support | |
158 | */ | |
159 | if (target->raidVolume == 1) | |
160 | noQas = 0; | |
161 | } else { | |
162 | factor = MPT_ASYNC; | |
163 | offset = 0; | |
164 | } | |
165 | } | |
166 | ||
167 | if (!sdev->tagged_supported) | |
168 | target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; | |
169 | ||
170 | /* Update tflags based on NVRAM settings. (SCSI only) | |
171 | */ | |
172 | if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { | |
173 | nvram = pspi_data->nvram[id]; | |
174 | nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; | |
175 | ||
176 | if (width) | |
177 | width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; | |
178 | ||
179 | if (offset > 0) { | |
180 | /* Ensure factor is set to the | |
181 | * maximum of: adapter, nvram, inquiry | |
182 | */ | |
183 | if (nfactor) { | |
184 | if (nfactor < pspi_data->minSyncFactor ) | |
185 | nfactor = pspi_data->minSyncFactor; | |
186 | ||
187 | factor = max(factor, nfactor); | |
188 | if (factor == MPT_ASYNC) | |
189 | offset = 0; | |
190 | } else { | |
191 | offset = 0; | |
192 | factor = MPT_ASYNC; | |
193 | } | |
194 | } else { | |
195 | factor = MPT_ASYNC; | |
196 | } | |
197 | } | |
198 | ||
199 | /* Make sure data is consistent | |
200 | */ | |
201 | if ((!width) && (factor < MPT_ULTRA2)) | |
202 | factor = MPT_ULTRA2; | |
203 | ||
204 | /* Save the data to the target structure. | |
205 | */ | |
206 | target->minSyncFactor = factor; | |
207 | target->maxOffset = offset; | |
208 | target->maxWidth = width; | |
209 | ||
210 | target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; | |
211 | ||
212 | /* Disable unused features. | |
213 | */ | |
214 | if (!width) | |
215 | target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; | |
216 | ||
217 | if (!offset) | |
218 | target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; | |
219 | ||
220 | if ( factor > MPT_ULTRA320 ) | |
221 | noQas = 0; | |
222 | ||
223 | if (noQas && (pspi_data->noQas == 0)) { | |
224 | pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; | |
225 | target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; | |
226 | ||
227 | /* Disable QAS in a mixed configuration case | |
228 | */ | |
229 | ||
230 | ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); | |
231 | } | |
232 | } | |
233 | ||
234 | /** | |
235 | * mptspi_writeIOCPage4 - write IOC Page 4 | |
236 | * @hd: Pointer to a SCSI Host Structure | |
237 | * @channel: | |
238 | * @id: write IOC Page4 for this ID & Bus | |
239 | * | |
240 | * Return: -EAGAIN if unable to obtain a Message Frame | |
241 | * or 0 if success. | |
242 | * | |
243 | * Remark: We do not wait for a return, write pages sequentially. | |
244 | **/ | |
245 | static int | |
246 | mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) | |
247 | { | |
248 | MPT_ADAPTER *ioc = hd->ioc; | |
249 | Config_t *pReq; | |
250 | IOCPage4_t *IOCPage4Ptr; | |
251 | MPT_FRAME_HDR *mf; | |
252 | dma_addr_t dataDma; | |
253 | u16 req_idx; | |
254 | u32 frameOffset; | |
255 | u32 flagsLength; | |
256 | int ii; | |
257 | ||
258 | /* Get a MF for this command. | |
259 | */ | |
260 | if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { | |
261 | dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n", | |
262 | ioc->name)); | |
263 | return -EAGAIN; | |
264 | } | |
265 | ||
266 | /* Set the request and the data pointers. | |
267 | * Place data at end of MF. | |
268 | */ | |
269 | pReq = (Config_t *)mf; | |
270 | ||
271 | req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); | |
272 | frameOffset = ioc->req_sz - sizeof(IOCPage4_t); | |
273 | ||
274 | /* Complete the request frame (same for all requests). | |
275 | */ | |
276 | pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | |
277 | pReq->Reserved = 0; | |
278 | pReq->ChainOffset = 0; | |
279 | pReq->Function = MPI_FUNCTION_CONFIG; | |
280 | pReq->ExtPageLength = 0; | |
281 | pReq->ExtPageType = 0; | |
282 | pReq->MsgFlags = 0; | |
283 | for (ii=0; ii < 8; ii++) { | |
284 | pReq->Reserved2[ii] = 0; | |
285 | } | |
286 | ||
287 | IOCPage4Ptr = ioc->spi_data.pIocPg4; | |
288 | dataDma = ioc->spi_data.IocPg4_dma; | |
289 | ii = IOCPage4Ptr->ActiveSEP++; | |
290 | IOCPage4Ptr->SEP[ii].SEPTargetID = id; | |
291 | IOCPage4Ptr->SEP[ii].SEPBus = channel; | |
292 | pReq->Header = IOCPage4Ptr->Header; | |
293 | pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); | |
294 | ||
295 | /* Add a SGE to the config request. | |
296 | */ | |
297 | flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | | |
298 | (IOCPage4Ptr->Header.PageLength + ii) * 4; | |
299 | ||
300 | mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); | |
301 | ||
302 | ddvprintk((MYIOC_s_INFO_FMT | |
303 | "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", | |
304 | ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); | |
305 | ||
306 | mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); | |
307 | ||
308 | return 0; | |
309 | } | |
310 | ||
311 | /** | |
312 | * mptspi_initTarget - Target, LUN alloc/free functionality. | |
313 | * @hd: Pointer to MPT_SCSI_HOST structure | |
314 | * @vtarget: per target private data | |
315 | * @sdev: SCSI device | |
316 | * | |
317 | * NOTE: It's only SAFE to call this routine if data points to | |
318 | * sane & valid STANDARD INQUIRY data! | |
319 | * | |
320 | * Allocate and initialize memory for this target. | |
321 | * Save inquiry data. | |
322 | * | |
323 | **/ | |
324 | static void | |
325 | mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, | |
326 | struct scsi_device *sdev) | |
327 | { | |
328 | ||
329 | /* Is LUN supported? If so, upper 2 bits will be 0 | |
330 | * in first byte of inquiry data. | |
331 | */ | |
332 | if (sdev->inq_periph_qual != 0) | |
333 | return; | |
334 | ||
335 | if (vtarget == NULL) | |
336 | return; | |
337 | ||
338 | vtarget->type = sdev->type; | |
339 | ||
340 | if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { | |
341 | /* Treat all Processors as SAF-TE if | |
342 | * command line option is set */ | |
343 | vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; | |
344 | mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); | |
345 | }else if ((sdev->type == TYPE_PROCESSOR) && | |
346 | !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { | |
347 | if (sdev->inquiry_len > 49 ) { | |
348 | if (sdev->inquiry[44] == 'S' && | |
349 | sdev->inquiry[45] == 'A' && | |
350 | sdev->inquiry[46] == 'F' && | |
351 | sdev->inquiry[47] == '-' && | |
352 | sdev->inquiry[48] == 'T' && | |
353 | sdev->inquiry[49] == 'E' ) { | |
354 | vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; | |
355 | mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); | |
356 | } | |
357 | } | |
358 | } | |
359 | mptspi_setTargetNegoParms(hd, vtarget, sdev); | |
360 | } | |
793955f5 EM |
361 | |
362 | /** | |
363 | * mptspi_is_raid - Determines whether target is belonging to volume | |
364 | * @hd: Pointer to a SCSI HOST structure | |
365 | * @id: target device id | |
366 | * | |
367 | * Return: | |
368 | * non-zero = true | |
369 | * zero = false | |
370 | * | |
371 | */ | |
372 | static int | |
373 | mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id) | |
374 | { | |
375 | int i, rc = 0; | |
376 | ||
377 | if (!hd->ioc->raid_data.pIocPg2) | |
378 | goto out; | |
379 | ||
380 | if (!hd->ioc->raid_data.pIocPg2->NumActiveVolumes) | |
381 | goto out; | |
382 | for (i=0; i < hd->ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { | |
383 | if (hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) { | |
384 | rc = 1; | |
385 | goto out; | |
386 | } | |
387 | } | |
388 | ||
389 | out: | |
390 | return rc; | |
391 | } | |
392 | ||
c92f222e JB |
393 | static int mptspi_target_alloc(struct scsi_target *starget) |
394 | { | |
395 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
396 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
793955f5 | 397 | VirtTarget *vtarget; |
c92f222e JB |
398 | |
399 | if (hd == NULL) | |
400 | return -ENODEV; | |
401 | ||
793955f5 EM |
402 | vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); |
403 | if (!vtarget) | |
404 | return -ENOMEM; | |
405 | ||
406 | vtarget->ioc_id = hd->ioc->id; | |
407 | vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; | |
408 | vtarget->id = (u8)starget->id; | |
409 | vtarget->channel = (u8)starget->channel; | |
410 | vtarget->starget = starget; | |
411 | starget->hostdata = vtarget; | |
412 | ||
413 | if (starget->channel == 1) { | |
414 | if (mptscsih_is_phys_disk(hd->ioc, 0, starget->id) == 0) | |
415 | return 0; | |
416 | vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; | |
417 | /* The real channel for this device is zero */ | |
418 | vtarget->channel = 0; | |
419 | /* The actual physdisknum (for RAID passthrough) */ | |
420 | vtarget->id = mptscsih_raid_id_to_num(hd->ioc, 0, | |
421 | starget->id); | |
422 | } | |
c92f222e | 423 | |
793955f5 EM |
424 | if (starget->channel == 0 && |
425 | mptspi_is_raid(hd, starget->id)) { | |
426 | vtarget->raidVolume = 1; | |
427 | ddvprintk((KERN_INFO | |
428 | "RAID Volume @ channel=%d id=%d\n", starget->channel, | |
429 | starget->id)); | |
430 | } | |
c92f222e JB |
431 | |
432 | if (hd->ioc->spi_data.nvram && | |
433 | hd->ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { | |
434 | u32 nvram = hd->ioc->spi_data.nvram[starget->id]; | |
435 | spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; | |
436 | spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; | |
437 | } else { | |
438 | spi_min_period(starget) = hd->ioc->spi_data.minSyncFactor; | |
439 | spi_max_width(starget) = hd->ioc->spi_data.maxBusWidth; | |
440 | } | |
441 | spi_max_offset(starget) = hd->ioc->spi_data.maxSyncOffset; | |
442 | ||
443 | spi_offset(starget) = 0; | |
444 | mptspi_write_width(starget, 0); | |
445 | ||
446 | return 0; | |
447 | } | |
448 | ||
793955f5 EM |
449 | void |
450 | mptspi_target_destroy(struct scsi_target *starget) | |
451 | { | |
452 | if (starget->hostdata) | |
453 | kfree(starget->hostdata); | |
454 | starget->hostdata = NULL; | |
455 | } | |
456 | ||
c92f222e JB |
457 | static int mptspi_read_spi_device_pg0(struct scsi_target *starget, |
458 | struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) | |
459 | { | |
460 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
461 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
462 | struct _MPT_ADAPTER *ioc = hd->ioc; | |
463 | struct _CONFIG_PAGE_SCSI_DEVICE_0 *pg0; | |
464 | dma_addr_t pg0_dma; | |
465 | int size; | |
466 | struct _x_config_parms cfg; | |
467 | struct _CONFIG_PAGE_HEADER hdr; | |
468 | int err = -EBUSY; | |
469 | ||
470 | /* No SPI parameters for RAID devices */ | |
471 | if (starget->channel == 0 && | |
793955f5 | 472 | mptspi_is_raid(hd, starget->id)) |
c92f222e JB |
473 | return -1; |
474 | ||
475 | size = ioc->spi_data.sdp0length * 4; | |
476 | /* | |
477 | if (ioc->spi_data.sdp0length & 1) | |
478 | size += size + 4; | |
479 | size += 2048; | |
480 | */ | |
481 | ||
482 | pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg0_dma, GFP_KERNEL); | |
483 | if (pg0 == NULL) { | |
484 | starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n"); | |
485 | return -EINVAL; | |
486 | } | |
487 | ||
488 | memset(&hdr, 0, sizeof(hdr)); | |
489 | ||
490 | hdr.PageVersion = ioc->spi_data.sdp0version; | |
491 | hdr.PageLength = ioc->spi_data.sdp0length; | |
492 | hdr.PageNumber = 0; | |
493 | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
494 | ||
495 | memset(&cfg, 0, sizeof(cfg)); | |
496 | ||
497 | cfg.cfghdr.hdr = &hdr; | |
498 | cfg.physAddr = pg0_dma; | |
499 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
500 | cfg.dir = 0; | |
501 | cfg.pageAddr = starget->id; | |
502 | ||
503 | if (mpt_config(ioc, &cfg)) { | |
504 | starget_printk(KERN_ERR, starget, "mpt_config failed\n"); | |
505 | goto out_free; | |
506 | } | |
507 | err = 0; | |
508 | memcpy(pass_pg0, pg0, size); | |
509 | ||
510 | out_free: | |
511 | dma_free_coherent(&ioc->pcidev->dev, size, pg0, pg0_dma); | |
512 | return err; | |
513 | } | |
514 | ||
515 | static u32 mptspi_getRP(struct scsi_target *starget) | |
516 | { | |
517 | u32 nego = 0; | |
518 | ||
519 | nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0; | |
520 | nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0; | |
521 | nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0; | |
522 | nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0; | |
523 | nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0; | |
524 | nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0; | |
525 | nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0; | |
526 | nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0; | |
527 | ||
528 | nego |= (spi_period(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; | |
529 | nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; | |
530 | nego |= spi_width(starget) ? MPI_SCSIDEVPAGE1_RP_WIDE : 0; | |
531 | ||
532 | return nego; | |
533 | } | |
534 | ||
535 | static void mptspi_read_parameters(struct scsi_target *starget) | |
536 | { | |
537 | int nego; | |
538 | struct _CONFIG_PAGE_SCSI_DEVICE_0 pg0; | |
539 | ||
540 | mptspi_read_spi_device_pg0(starget, &pg0); | |
541 | ||
542 | nego = le32_to_cpu(pg0.NegotiatedParameters); | |
543 | ||
544 | spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0; | |
545 | spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0; | |
546 | spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0; | |
547 | spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0; | |
548 | spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0; | |
549 | spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0; | |
550 | spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0; | |
551 | spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0; | |
552 | spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; | |
553 | spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; | |
554 | spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0; | |
555 | } | |
556 | ||
557 | static int | |
793955f5 | 558 | mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id) |
c92f222e JB |
559 | { |
560 | MpiRaidActionRequest_t *pReq; | |
561 | MPT_FRAME_HDR *mf; | |
562 | ||
563 | /* Get and Populate a free Frame | |
564 | */ | |
565 | if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) { | |
566 | ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n", | |
567 | hd->ioc->name)); | |
568 | return -EAGAIN; | |
569 | } | |
570 | pReq = (MpiRaidActionRequest_t *)mf; | |
571 | if (quiesce) | |
572 | pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO; | |
573 | else | |
574 | pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO; | |
575 | pReq->Reserved1 = 0; | |
576 | pReq->ChainOffset = 0; | |
577 | pReq->Function = MPI_FUNCTION_RAID_ACTION; | |
793955f5 EM |
578 | pReq->VolumeID = id; |
579 | pReq->VolumeBus = channel; | |
c92f222e JB |
580 | pReq->PhysDiskNum = 0; |
581 | pReq->MsgFlags = 0; | |
582 | pReq->Reserved2 = 0; | |
583 | pReq->ActionDataWord = 0; /* Reserved for this action */ | |
584 | ||
585 | mpt_add_sge((char *)&pReq->ActionDataSGE, | |
586 | MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); | |
587 | ||
793955f5 EM |
588 | ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action=%x channel=%d id=%d\n", |
589 | hd->ioc->name, pReq->Action, channel, id)); | |
c92f222e JB |
590 | |
591 | hd->pLocal = NULL; | |
592 | hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */ | |
593 | hd->scandv_wait_done = 0; | |
594 | ||
595 | /* Save cmd pointer, for resource free if timeout or | |
596 | * FW reload occurs | |
597 | */ | |
598 | hd->cmdPtr = mf; | |
599 | ||
600 | add_timer(&hd->timer); | |
601 | mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf); | |
602 | wait_event(hd->scandv_waitq, hd->scandv_wait_done); | |
603 | ||
604 | if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0)) | |
605 | return -1; | |
606 | ||
607 | return 0; | |
608 | } | |
609 | ||
610 | static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, | |
611 | struct scsi_device *sdev) | |
612 | { | |
613 | VirtTarget *vtarget = scsi_target(sdev)->hostdata; | |
614 | ||
615 | /* no DV on RAID devices */ | |
616 | if (sdev->channel == 0 && | |
793955f5 | 617 | mptspi_is_raid(hd, sdev->id)) |
c92f222e JB |
618 | return; |
619 | ||
620 | /* If this is a piece of a RAID, then quiesce first */ | |
621 | if (sdev->channel == 1 && | |
793955f5 | 622 | mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) { |
c92f222e JB |
623 | starget_printk(KERN_ERR, scsi_target(sdev), |
624 | "Integrated RAID quiesce failed\n"); | |
625 | return; | |
626 | } | |
627 | ||
628 | spi_dv_device(sdev); | |
629 | ||
630 | if (sdev->channel == 1 && | |
793955f5 | 631 | mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0) |
c92f222e JB |
632 | starget_printk(KERN_ERR, scsi_target(sdev), |
633 | "Integrated RAID resume failed\n"); | |
634 | ||
635 | mptspi_read_parameters(sdev->sdev_target); | |
636 | spi_display_xfer_agreement(sdev->sdev_target); | |
637 | mptspi_read_parameters(sdev->sdev_target); | |
638 | } | |
639 | ||
640 | static int mptspi_slave_alloc(struct scsi_device *sdev) | |
641 | { | |
c92f222e | 642 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; |
793955f5 EM |
643 | VirtTarget *vtarget; |
644 | VirtDevice *vdev; | |
645 | struct scsi_target *starget; | |
c92f222e | 646 | |
793955f5 EM |
647 | if (sdev->channel == 1 && |
648 | mptscsih_is_phys_disk(hd->ioc, 0, sdev->id) == 0) | |
649 | return -ENXIO; | |
650 | ||
651 | vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); | |
652 | if (!vdev) { | |
653 | printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", | |
654 | hd->ioc->name, sizeof(VirtDevice)); | |
655 | return -ENOMEM; | |
c92f222e JB |
656 | } |
657 | ||
793955f5 EM |
658 | vdev->lun = sdev->lun; |
659 | sdev->hostdata = vdev; | |
c92f222e | 660 | |
793955f5 EM |
661 | starget = scsi_target(sdev); |
662 | vtarget = starget->hostdata; | |
663 | vdev->vtarget = vtarget; | |
664 | vtarget->num_luns++; | |
c92f222e | 665 | |
793955f5 | 666 | if (sdev->channel == 1) |
c92f222e | 667 | sdev->no_uld_attach = 1; |
c92f222e JB |
668 | |
669 | return 0; | |
670 | } | |
671 | ||
672 | static int mptspi_slave_configure(struct scsi_device *sdev) | |
673 | { | |
c92f222e JB |
674 | struct _MPT_SCSI_HOST *hd = |
675 | (struct _MPT_SCSI_HOST *)sdev->host->hostdata; | |
5a9c47b1 EM |
676 | VirtTarget *vtarget = scsi_target(sdev)->hostdata; |
677 | int ret = mptscsih_slave_configure(sdev); | |
c92f222e JB |
678 | |
679 | if (ret) | |
680 | return ret; | |
681 | ||
5a9c47b1 EM |
682 | mptspi_initTarget(hd, vtarget, sdev); |
683 | ||
c92f222e | 684 | if ((sdev->channel == 1 || |
793955f5 | 685 | !(mptspi_is_raid(hd, sdev->id))) && |
c92f222e JB |
686 | !spi_initial_dv(sdev->sdev_target)) |
687 | mptspi_dv_device(hd, sdev); | |
688 | ||
689 | return 0; | |
690 | } | |
691 | ||
793955f5 EM |
692 | static int |
693 | mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) | |
694 | { | |
695 | struct _MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata; | |
696 | VirtDevice *vdev = SCpnt->device->hostdata; | |
697 | ||
698 | if (!vdev || !vdev->vtarget) { | |
699 | SCpnt->result = DID_NO_CONNECT << 16; | |
700 | done(SCpnt); | |
701 | return 0; | |
702 | } | |
703 | ||
704 | if (SCpnt->device->channel == 1 && | |
705 | mptscsih_is_phys_disk(hd->ioc, 0, SCpnt->device->id) == 0) { | |
706 | SCpnt->result = DID_NO_CONNECT << 16; | |
707 | done(SCpnt); | |
708 | return 0; | |
709 | } | |
710 | ||
711 | return mptscsih_qcmd(SCpnt,done); | |
712 | } | |
713 | ||
c92f222e JB |
714 | static void mptspi_slave_destroy(struct scsi_device *sdev) |
715 | { | |
716 | struct scsi_target *starget = scsi_target(sdev); | |
717 | VirtTarget *vtarget = starget->hostdata; | |
718 | VirtDevice *vdevice = sdev->hostdata; | |
719 | ||
720 | /* Will this be the last lun on a non-raid device? */ | |
721 | if (vtarget->num_luns == 1 && vdevice->configured_lun) { | |
722 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
723 | ||
724 | /* Async Narrow */ | |
725 | pg1.RequestedParameters = 0; | |
726 | pg1.Reserved = 0; | |
727 | pg1.Configuration = 0; | |
728 | ||
729 | mptspi_write_spi_device_pg1(starget, &pg1); | |
730 | } | |
731 | ||
732 | mptscsih_slave_destroy(sdev); | |
733 | } | |
734 | ||
243eabcf | 735 | static struct scsi_host_template mptspi_driver_template = { |
f78496da | 736 | .module = THIS_MODULE, |
243eabcf MED |
737 | .proc_name = "mptspi", |
738 | .proc_info = mptscsih_proc_info, | |
739 | .name = "MPT SPI Host", | |
740 | .info = mptscsih_info, | |
793955f5 | 741 | .queuecommand = mptspi_qcmd, |
c92f222e JB |
742 | .target_alloc = mptspi_target_alloc, |
743 | .slave_alloc = mptspi_slave_alloc, | |
744 | .slave_configure = mptspi_slave_configure, | |
793955f5 | 745 | .target_destroy = mptspi_target_destroy, |
c92f222e | 746 | .slave_destroy = mptspi_slave_destroy, |
6e3815ba | 747 | .change_queue_depth = mptscsih_change_queue_depth, |
243eabcf MED |
748 | .eh_abort_handler = mptscsih_abort, |
749 | .eh_device_reset_handler = mptscsih_dev_reset, | |
750 | .eh_bus_reset_handler = mptscsih_bus_reset, | |
751 | .eh_host_reset_handler = mptscsih_host_reset, | |
752 | .bios_param = mptscsih_bios_param, | |
753 | .can_queue = MPT_SCSI_CAN_QUEUE, | |
754 | .this_id = -1, | |
755 | .sg_tablesize = MPT_SCSI_SG_DEPTH, | |
756 | .max_sectors = 8192, | |
757 | .cmd_per_lun = 7, | |
758 | .use_clustering = ENABLE_CLUSTERING, | |
243eabcf MED |
759 | }; |
760 | ||
c92f222e JB |
761 | static int mptspi_write_spi_device_pg1(struct scsi_target *starget, |
762 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1) | |
763 | { | |
764 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
765 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
766 | struct _MPT_ADAPTER *ioc = hd->ioc; | |
767 | struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1; | |
768 | dma_addr_t pg1_dma; | |
769 | int size; | |
770 | struct _x_config_parms cfg; | |
771 | struct _CONFIG_PAGE_HEADER hdr; | |
772 | int err = -EBUSY; | |
773 | ||
774 | /* don't allow updating nego parameters on RAID devices */ | |
775 | if (starget->channel == 0 && | |
793955f5 | 776 | mptspi_is_raid(hd, starget->id)) |
c92f222e JB |
777 | return -1; |
778 | ||
779 | size = ioc->spi_data.sdp1length * 4; | |
780 | ||
781 | pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL); | |
782 | if (pg1 == NULL) { | |
783 | starget_printk(KERN_ERR, starget, "dma_alloc_coherent for parameters failed\n"); | |
784 | return -EINVAL; | |
785 | } | |
786 | ||
787 | memset(&hdr, 0, sizeof(hdr)); | |
788 | ||
789 | hdr.PageVersion = ioc->spi_data.sdp1version; | |
790 | hdr.PageLength = ioc->spi_data.sdp1length; | |
791 | hdr.PageNumber = 1; | |
792 | hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; | |
793 | ||
794 | memset(&cfg, 0, sizeof(cfg)); | |
795 | ||
796 | cfg.cfghdr.hdr = &hdr; | |
797 | cfg.physAddr = pg1_dma; | |
798 | cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; | |
799 | cfg.dir = 1; | |
800 | cfg.pageAddr = starget->id; | |
801 | ||
802 | memcpy(pg1, pass_pg1, size); | |
803 | ||
804 | pg1->Header.PageVersion = hdr.PageVersion; | |
805 | pg1->Header.PageLength = hdr.PageLength; | |
806 | pg1->Header.PageNumber = hdr.PageNumber; | |
807 | pg1->Header.PageType = hdr.PageType; | |
808 | ||
809 | if (mpt_config(ioc, &cfg)) { | |
810 | starget_printk(KERN_ERR, starget, "mpt_config failed\n"); | |
811 | goto out_free; | |
812 | } | |
813 | err = 0; | |
814 | ||
815 | out_free: | |
816 | dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma); | |
817 | return err; | |
818 | } | |
819 | ||
820 | static void mptspi_write_offset(struct scsi_target *starget, int offset) | |
821 | { | |
822 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
823 | u32 nego; | |
824 | ||
825 | if (offset < 0) | |
826 | offset = 0; | |
827 | ||
828 | if (offset > 255) | |
829 | offset = 255; | |
830 | ||
831 | if (spi_offset(starget) == -1) | |
832 | mptspi_read_parameters(starget); | |
833 | ||
834 | spi_offset(starget) = offset; | |
835 | ||
836 | nego = mptspi_getRP(starget); | |
837 | ||
838 | pg1.RequestedParameters = cpu_to_le32(nego); | |
839 | pg1.Reserved = 0; | |
840 | pg1.Configuration = 0; | |
841 | ||
842 | mptspi_write_spi_device_pg1(starget, &pg1); | |
843 | } | |
844 | ||
845 | static void mptspi_write_period(struct scsi_target *starget, int period) | |
846 | { | |
847 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
848 | u32 nego; | |
849 | ||
850 | if (period < 8) | |
851 | period = 8; | |
852 | ||
853 | if (period > 255) | |
854 | period = 255; | |
855 | ||
856 | if (spi_period(starget) == -1) | |
857 | mptspi_read_parameters(starget); | |
858 | ||
859 | if (period == 8) { | |
860 | spi_iu(starget) = 1; | |
861 | spi_dt(starget) = 1; | |
862 | } else if (period == 9) { | |
863 | spi_dt(starget) = 1; | |
864 | } | |
865 | ||
866 | spi_period(starget) = period; | |
867 | ||
868 | nego = mptspi_getRP(starget); | |
869 | ||
870 | pg1.RequestedParameters = cpu_to_le32(nego); | |
871 | pg1.Reserved = 0; | |
872 | pg1.Configuration = 0; | |
873 | ||
874 | mptspi_write_spi_device_pg1(starget, &pg1); | |
875 | } | |
876 | ||
877 | static void mptspi_write_dt(struct scsi_target *starget, int dt) | |
878 | { | |
879 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
880 | u32 nego; | |
881 | ||
882 | if (spi_period(starget) == -1) | |
883 | mptspi_read_parameters(starget); | |
884 | ||
885 | if (!dt && spi_period(starget) < 10) | |
886 | spi_period(starget) = 10; | |
887 | ||
888 | spi_dt(starget) = dt; | |
889 | ||
890 | nego = mptspi_getRP(starget); | |
891 | ||
892 | ||
893 | pg1.RequestedParameters = cpu_to_le32(nego); | |
894 | pg1.Reserved = 0; | |
895 | pg1.Configuration = 0; | |
896 | ||
897 | mptspi_write_spi_device_pg1(starget, &pg1); | |
898 | } | |
899 | ||
900 | static void mptspi_write_iu(struct scsi_target *starget, int iu) | |
901 | { | |
902 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
903 | u32 nego; | |
904 | ||
905 | if (spi_period(starget) == -1) | |
906 | mptspi_read_parameters(starget); | |
907 | ||
908 | if (!iu && spi_period(starget) < 9) | |
909 | spi_period(starget) = 9; | |
910 | ||
911 | spi_iu(starget) = iu; | |
912 | ||
913 | nego = mptspi_getRP(starget); | |
914 | ||
915 | pg1.RequestedParameters = cpu_to_le32(nego); | |
916 | pg1.Reserved = 0; | |
917 | pg1.Configuration = 0; | |
918 | ||
919 | mptspi_write_spi_device_pg1(starget, &pg1); | |
920 | } | |
921 | ||
922 | #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \ | |
923 | static void mptspi_write_##parm(struct scsi_target *starget, int parm)\ | |
924 | { \ | |
925 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \ | |
926 | u32 nego; \ | |
927 | \ | |
928 | spi_##parm(starget) = parm; \ | |
929 | \ | |
930 | nego = mptspi_getRP(starget); \ | |
931 | \ | |
932 | pg1.RequestedParameters = cpu_to_le32(nego); \ | |
933 | pg1.Reserved = 0; \ | |
934 | pg1.Configuration = 0; \ | |
935 | \ | |
936 | mptspi_write_spi_device_pg1(starget, &pg1); \ | |
937 | } | |
938 | ||
939 | MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm) | |
940 | MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow) | |
941 | MPTSPI_SIMPLE_TRANSPORT_PARM(rti) | |
942 | MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs) | |
943 | MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en) | |
944 | ||
945 | static void mptspi_write_qas(struct scsi_target *starget, int qas) | |
946 | { | |
947 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
948 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
949 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata; | |
950 | VirtTarget *vtarget = starget->hostdata; | |
951 | u32 nego; | |
952 | ||
953 | if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) || | |
954 | hd->ioc->spi_data.noQas) | |
955 | spi_qas(starget) = 0; | |
956 | else | |
957 | spi_qas(starget) = qas; | |
958 | ||
959 | nego = mptspi_getRP(starget); | |
960 | ||
961 | pg1.RequestedParameters = cpu_to_le32(nego); | |
962 | pg1.Reserved = 0; | |
963 | pg1.Configuration = 0; | |
964 | ||
965 | mptspi_write_spi_device_pg1(starget, &pg1); | |
966 | } | |
967 | ||
968 | static void mptspi_write_width(struct scsi_target *starget, int width) | |
969 | { | |
970 | struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; | |
971 | u32 nego; | |
972 | ||
973 | if (!width) { | |
974 | spi_dt(starget) = 0; | |
975 | if (spi_period(starget) < 10) | |
976 | spi_period(starget) = 10; | |
977 | } | |
978 | ||
979 | spi_width(starget) = width; | |
980 | ||
981 | nego = mptspi_getRP(starget); | |
982 | ||
983 | pg1.RequestedParameters = cpu_to_le32(nego); | |
984 | pg1.Reserved = 0; | |
985 | pg1.Configuration = 0; | |
986 | ||
987 | mptspi_write_spi_device_pg1(starget, &pg1); | |
988 | } | |
989 | ||
990 | struct work_queue_wrapper { | |
991 | struct work_struct work; | |
992 | struct _MPT_SCSI_HOST *hd; | |
993 | int disk; | |
994 | }; | |
995 | ||
c4028958 | 996 | static void mpt_work_wrapper(struct work_struct *work) |
c92f222e | 997 | { |
c4028958 DH |
998 | struct work_queue_wrapper *wqw = |
999 | container_of(work, struct work_queue_wrapper, work); | |
c92f222e JB |
1000 | struct _MPT_SCSI_HOST *hd = wqw->hd; |
1001 | struct Scsi_Host *shost = hd->ioc->sh; | |
1002 | struct scsi_device *sdev; | |
1003 | int disk = wqw->disk; | |
1004 | struct _CONFIG_PAGE_IOC_3 *pg3; | |
1005 | ||
1006 | kfree(wqw); | |
1007 | ||
1008 | mpt_findImVolumes(hd->ioc); | |
1009 | pg3 = hd->ioc->raid_data.pIocPg3; | |
1010 | if (!pg3) | |
1011 | return; | |
1012 | ||
1013 | shost_for_each_device(sdev,shost) { | |
1014 | struct scsi_target *starget = scsi_target(sdev); | |
1015 | VirtTarget *vtarget = starget->hostdata; | |
1016 | ||
1017 | /* only want to search RAID components */ | |
1018 | if (sdev->channel != 1) | |
1019 | continue; | |
1020 | ||
793955f5 | 1021 | /* The id is the raid PhysDiskNum, even if |
c92f222e | 1022 | * starget->id is the actual target address */ |
793955f5 | 1023 | if(vtarget->id != disk) |
c92f222e JB |
1024 | continue; |
1025 | ||
1026 | starget_printk(KERN_INFO, vtarget->starget, | |
1027 | "Integrated RAID requests DV of new device\n"); | |
1028 | mptspi_dv_device(hd, sdev); | |
1029 | } | |
1030 | shost_printk(KERN_INFO, shost, | |
1031 | "Integrated RAID detects new device %d\n", disk); | |
1032 | scsi_scan_target(&hd->ioc->sh->shost_gendev, 1, disk, 0, 1); | |
1033 | } | |
1034 | ||
1035 | ||
1036 | static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk) | |
1037 | { | |
1038 | struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); | |
1039 | ||
1040 | if (!wqw) { | |
1041 | shost_printk(KERN_ERR, hd->ioc->sh, | |
1042 | "Failed to act on RAID event for physical disk %d\n", | |
1043 | disk); | |
1044 | return; | |
1045 | } | |
c4028958 | 1046 | INIT_WORK(&wqw->work, mpt_work_wrapper); |
c92f222e JB |
1047 | wqw->hd = hd; |
1048 | wqw->disk = disk; | |
1049 | ||
1050 | schedule_work(&wqw->work); | |
1051 | } | |
1052 | ||
1053 | static int | |
1054 | mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) | |
1055 | { | |
1056 | u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; | |
1057 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata; | |
1058 | ||
1059 | if (hd && event == MPI_EVENT_INTEGRATED_RAID) { | |
1060 | int reason | |
1061 | = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; | |
1062 | ||
1063 | if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { | |
1064 | int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; | |
1065 | mpt_dv_raid(hd, disk); | |
1066 | } | |
1067 | } | |
1068 | return mptscsih_event_process(ioc, pEvReply); | |
1069 | } | |
1070 | ||
1071 | static int | |
1072 | mptspi_deny_binding(struct scsi_target *starget) | |
1073 | { | |
1074 | struct _MPT_SCSI_HOST *hd = | |
1075 | (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; | |
793955f5 | 1076 | return ((mptspi_is_raid(hd, starget->id)) && |
c92f222e JB |
1077 | starget->channel == 0) ? 1 : 0; |
1078 | } | |
1079 | ||
1080 | static struct spi_function_template mptspi_transport_functions = { | |
1081 | .get_offset = mptspi_read_parameters, | |
1082 | .set_offset = mptspi_write_offset, | |
1083 | .show_offset = 1, | |
1084 | .get_period = mptspi_read_parameters, | |
1085 | .set_period = mptspi_write_period, | |
1086 | .show_period = 1, | |
1087 | .get_width = mptspi_read_parameters, | |
1088 | .set_width = mptspi_write_width, | |
1089 | .show_width = 1, | |
1090 | .get_iu = mptspi_read_parameters, | |
1091 | .set_iu = mptspi_write_iu, | |
1092 | .show_iu = 1, | |
1093 | .get_dt = mptspi_read_parameters, | |
1094 | .set_dt = mptspi_write_dt, | |
1095 | .show_dt = 1, | |
1096 | .get_qas = mptspi_read_parameters, | |
1097 | .set_qas = mptspi_write_qas, | |
1098 | .show_qas = 1, | |
1099 | .get_wr_flow = mptspi_read_parameters, | |
1100 | .set_wr_flow = mptspi_write_wr_flow, | |
1101 | .show_wr_flow = 1, | |
1102 | .get_rd_strm = mptspi_read_parameters, | |
1103 | .set_rd_strm = mptspi_write_rd_strm, | |
1104 | .show_rd_strm = 1, | |
1105 | .get_rti = mptspi_read_parameters, | |
1106 | .set_rti = mptspi_write_rti, | |
1107 | .show_rti = 1, | |
1108 | .get_pcomp_en = mptspi_read_parameters, | |
1109 | .set_pcomp_en = mptspi_write_pcomp_en, | |
1110 | .show_pcomp_en = 1, | |
1111 | .get_hold_mcs = mptspi_read_parameters, | |
1112 | .set_hold_mcs = mptspi_write_hold_mcs, | |
1113 | .show_hold_mcs = 1, | |
1114 | .deny_binding = mptspi_deny_binding, | |
1115 | }; | |
243eabcf MED |
1116 | |
1117 | /**************************************************************************** | |
1118 | * Supported hardware | |
1119 | */ | |
1120 | ||
1121 | static struct pci_device_id mptspi_pci_table[] = { | |
87cf8986 | 1122 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030, |
243eabcf | 1123 | PCI_ANY_ID, PCI_ANY_ID }, |
87cf8986 | 1124 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035, |
243eabcf MED |
1125 | PCI_ANY_ID, PCI_ANY_ID }, |
1126 | {0} /* Terminating entry */ | |
1127 | }; | |
1128 | MODULE_DEVICE_TABLE(pci, mptspi_pci_table); | |
1129 | ||
6e1cad02 EM |
1130 | |
1131 | /* | |
1132 | * renegotiate for a given target | |
1133 | */ | |
1134 | static void | |
c4028958 | 1135 | mptspi_dv_renegotiate_work(struct work_struct *work) |
6e1cad02 | 1136 | { |
c4028958 DH |
1137 | struct work_queue_wrapper *wqw = |
1138 | container_of(work, struct work_queue_wrapper, work); | |
6e1cad02 EM |
1139 | struct _MPT_SCSI_HOST *hd = wqw->hd; |
1140 | struct scsi_device *sdev; | |
1141 | ||
1142 | kfree(wqw); | |
1143 | ||
1144 | shost_for_each_device(sdev, hd->ioc->sh) | |
1145 | mptspi_dv_device(hd, sdev); | |
1146 | } | |
1147 | ||
1148 | static void | |
1149 | mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd) | |
1150 | { | |
1151 | struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); | |
1152 | ||
1153 | if (!wqw) | |
1154 | return; | |
1155 | ||
c4028958 | 1156 | INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work); |
6e1cad02 EM |
1157 | wqw->hd = hd; |
1158 | ||
1159 | schedule_work(&wqw->work); | |
1160 | } | |
1161 | ||
1162 | /* | |
1163 | * spi module reset handler | |
1164 | */ | |
1165 | static int | |
1166 | mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) | |
1167 | { | |
1168 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata; | |
1169 | int rc; | |
1170 | ||
1171 | rc = mptscsih_ioc_reset(ioc, reset_phase); | |
1172 | ||
1173 | if (reset_phase == MPT_IOC_POST_RESET) | |
1174 | mptspi_dv_renegotiate(hd); | |
1175 | ||
1176 | return rc; | |
1177 | } | |
1178 | ||
c29ca9d1 | 1179 | #ifdef CONFIG_PM |
6e1cad02 EM |
1180 | /* |
1181 | * spi module resume handler | |
1182 | */ | |
1183 | static int | |
1184 | mptspi_resume(struct pci_dev *pdev) | |
1185 | { | |
1186 | MPT_ADAPTER *ioc = pci_get_drvdata(pdev); | |
1187 | struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata; | |
1188 | int rc; | |
1189 | ||
1190 | rc = mptscsih_resume(pdev); | |
1191 | mptspi_dv_renegotiate(hd); | |
1192 | ||
1193 | return rc; | |
1194 | } | |
c29ca9d1 | 1195 | #endif |
6e1cad02 | 1196 | |
243eabcf MED |
1197 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
1198 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1199 | /* | |
1200 | * mptspi_probe - Installs scsi devices per bus. | |
1201 | * @pdev: Pointer to pci_dev structure | |
1202 | * | |
1203 | * Returns 0 for success, non-zero for failure. | |
1204 | * | |
1205 | */ | |
1206 | static int | |
1207 | mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
1208 | { | |
1209 | struct Scsi_Host *sh; | |
1210 | MPT_SCSI_HOST *hd; | |
1211 | MPT_ADAPTER *ioc; | |
1212 | unsigned long flags; | |
1ca00bb7 | 1213 | int ii; |
243eabcf MED |
1214 | int numSGE = 0; |
1215 | int scale; | |
1216 | int ioc_cap; | |
243eabcf MED |
1217 | int error=0; |
1218 | int r; | |
c6678e0c | 1219 | |
243eabcf MED |
1220 | if ((r = mpt_attach(pdev,id)) != 0) |
1221 | return r; | |
c6678e0c | 1222 | |
243eabcf | 1223 | ioc = pci_get_drvdata(pdev); |
d335cc38 MED |
1224 | ioc->DoneCtx = mptspiDoneCtx; |
1225 | ioc->TaskCtx = mptspiTaskCtx; | |
1226 | ioc->InternalCtx = mptspiInternalCtx; | |
c6678e0c | 1227 | |
243eabcf MED |
1228 | /* Added sanity check on readiness of the MPT adapter. |
1229 | */ | |
1230 | if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { | |
1231 | printk(MYIOC_s_WARN_FMT | |
1232 | "Skipping because it's not operational!\n", | |
1233 | ioc->name); | |
7acec1e7 MED |
1234 | error = -ENODEV; |
1235 | goto out_mptspi_probe; | |
243eabcf MED |
1236 | } |
1237 | ||
1238 | if (!ioc->active) { | |
1239 | printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", | |
1240 | ioc->name); | |
7acec1e7 MED |
1241 | error = -ENODEV; |
1242 | goto out_mptspi_probe; | |
243eabcf MED |
1243 | } |
1244 | ||
1245 | /* Sanity check - ensure at least 1 port is INITIATOR capable | |
1246 | */ | |
1247 | ioc_cap = 0; | |
1248 | for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { | |
1249 | if (ioc->pfacts[ii].ProtocolFlags & | |
1250 | MPI_PORTFACTS_PROTOCOL_INITIATOR) | |
1251 | ioc_cap ++; | |
1252 | } | |
1253 | ||
1254 | if (!ioc_cap) { | |
1255 | printk(MYIOC_s_WARN_FMT | |
1256 | "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", | |
1257 | ioc->name, ioc); | |
466544d8 | 1258 | return 0; |
243eabcf MED |
1259 | } |
1260 | ||
1261 | sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); | |
1262 | ||
1263 | if (!sh) { | |
1264 | printk(MYIOC_s_WARN_FMT | |
1265 | "Unable to register controller with SCSI subsystem\n", | |
1266 | ioc->name); | |
7acec1e7 MED |
1267 | error = -1; |
1268 | goto out_mptspi_probe; | |
243eabcf MED |
1269 | } |
1270 | ||
1271 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
1272 | ||
1273 | /* Attach the SCSI Host to the IOC structure | |
1274 | */ | |
1275 | ioc->sh = sh; | |
1276 | ||
1277 | sh->io_port = 0; | |
1278 | sh->n_io_port = 0; | |
1279 | sh->irq = 0; | |
1280 | ||
1281 | /* set 16 byte cdb's */ | |
1282 | sh->max_cmd_len = 16; | |
1283 | ||
1284 | /* Yikes! This is important! | |
1285 | * Otherwise, by default, linux | |
1286 | * only scans target IDs 0-7! | |
1287 | * pfactsN->MaxDevices unreliable | |
1288 | * (not supported in early | |
1289 | * versions of the FW). | |
1290 | * max_id = 1 + actual max id, | |
1291 | * max_lun = 1 + actual last lun, | |
1292 | * see hosts.h :o( | |
1293 | */ | |
793955f5 | 1294 | sh->max_id = ioc->devices_per_bus; |
243eabcf MED |
1295 | |
1296 | sh->max_lun = MPT_LAST_LUN + 1; | |
c92f222e JB |
1297 | /* |
1298 | * If RAID Firmware Detected, setup virtual channel | |
1299 | */ | |
1300 | if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) | |
1301 | > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) | |
1302 | sh->max_channel = 1; | |
1303 | else | |
1304 | sh->max_channel = 0; | |
243eabcf MED |
1305 | sh->this_id = ioc->pfacts[0].PortSCSIID; |
1306 | ||
1307 | /* Required entry. | |
1308 | */ | |
1309 | sh->unique_id = ioc->id; | |
1310 | ||
1311 | /* Verify that we won't exceed the maximum | |
1312 | * number of chain buffers | |
1313 | * We can optimize: ZZ = req_sz/sizeof(SGE) | |
1314 | * For 32bit SGE's: | |
1315 | * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ | |
1316 | * + (req_sz - 64)/sizeof(SGE) | |
1317 | * A slightly different algorithm is required for | |
1318 | * 64bit SGEs. | |
1319 | */ | |
1320 | scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); | |
1321 | if (sizeof(dma_addr_t) == sizeof(u64)) { | |
1322 | numSGE = (scale - 1) * | |
1323 | (ioc->facts.MaxChainDepth-1) + scale + | |
1324 | (ioc->req_sz - 60) / (sizeof(dma_addr_t) + | |
1325 | sizeof(u32)); | |
1326 | } else { | |
1327 | numSGE = 1 + (scale - 1) * | |
1328 | (ioc->facts.MaxChainDepth-1) + scale + | |
1329 | (ioc->req_sz - 64) / (sizeof(dma_addr_t) + | |
1330 | sizeof(u32)); | |
1331 | } | |
1332 | ||
1333 | if (numSGE < sh->sg_tablesize) { | |
1334 | /* Reset this value */ | |
1335 | dprintk((MYIOC_s_INFO_FMT | |
1336 | "Resetting sg_tablesize to %d from %d\n", | |
1337 | ioc->name, numSGE, sh->sg_tablesize)); | |
1338 | sh->sg_tablesize = numSGE; | |
1339 | } | |
1340 | ||
243eabcf MED |
1341 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
1342 | ||
1343 | hd = (MPT_SCSI_HOST *) sh->hostdata; | |
1344 | hd->ioc = ioc; | |
1345 | ||
1346 | /* SCSI needs scsi_cmnd lookup table! | |
1347 | * (with size equal to req_depth*PtrSz!) | |
1348 | */ | |
1ca00bb7 CH |
1349 | hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); |
1350 | if (!hd->ScsiLookup) { | |
243eabcf | 1351 | error = -ENOMEM; |
7acec1e7 | 1352 | goto out_mptspi_probe; |
243eabcf MED |
1353 | } |
1354 | ||
1ca00bb7 CH |
1355 | dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", |
1356 | ioc->name, hd->ScsiLookup)); | |
243eabcf | 1357 | |
243eabcf MED |
1358 | /* Clear the TM flags |
1359 | */ | |
1360 | hd->tmPending = 0; | |
1361 | hd->tmState = TM_STATE_NONE; | |
1362 | hd->resetPending = 0; | |
1363 | hd->abortSCpnt = NULL; | |
1364 | ||
1365 | /* Clear the pointer used to store | |
1366 | * single-threaded commands, i.e., those | |
1367 | * issued during a bus scan, dv and | |
1368 | * configuration pages. | |
1369 | */ | |
1370 | hd->cmdPtr = NULL; | |
1371 | ||
1372 | /* Initialize this SCSI Hosts' timers | |
1373 | * To use, set the timer expires field | |
1374 | * and add_timer | |
1375 | */ | |
1376 | init_timer(&hd->timer); | |
1377 | hd->timer.data = (unsigned long) hd; | |
1378 | hd->timer.function = mptscsih_timer_expired; | |
1379 | ||
1380 | ioc->spi_data.Saf_Te = mpt_saf_te; | |
243eabcf | 1381 | |
243eabcf MED |
1382 | hd->negoNvram = MPT_SCSICFG_USE_NVRAM; |
1383 | ddvprintk((MYIOC_s_INFO_FMT | |
ba856d32 | 1384 | "saf_te %x\n", |
243eabcf | 1385 | ioc->name, |
ba856d32 | 1386 | mpt_saf_te)); |
243eabcf MED |
1387 | ioc->spi_data.noQas = 0; |
1388 | ||
243eabcf MED |
1389 | init_waitqueue_head(&hd->scandv_waitq); |
1390 | hd->scandv_wait_done = 0; | |
1391 | hd->last_queue_full = 0; | |
1392 | ||
c92f222e JB |
1393 | /* Some versions of the firmware don't support page 0; without |
1394 | * that we can't get the parameters */ | |
1395 | if (hd->ioc->spi_data.sdp0length != 0) | |
1396 | sh->transportt = mptspi_transport_template; | |
1397 | ||
243eabcf MED |
1398 | error = scsi_add_host (sh, &ioc->pcidev->dev); |
1399 | if(error) { | |
1400 | dprintk((KERN_ERR MYNAM | |
1401 | "scsi_add_host failed\n")); | |
7acec1e7 | 1402 | goto out_mptspi_probe; |
243eabcf MED |
1403 | } |
1404 | ||
d8e925dc ME |
1405 | /* |
1406 | * issue internal bus reset | |
1407 | */ | |
1408 | if (ioc->spi_data.bus_reset) | |
1409 | mptscsih_TMHandler(hd, | |
1410 | MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, | |
1411 | 0, 0, 0, 0, 5); | |
1412 | ||
243eabcf MED |
1413 | scsi_scan_host(sh); |
1414 | return 0; | |
1415 | ||
7acec1e7 | 1416 | out_mptspi_probe: |
243eabcf MED |
1417 | |
1418 | mptscsih_remove(pdev); | |
1419 | return error; | |
1420 | } | |
1421 | ||
1422 | static struct pci_driver mptspi_driver = { | |
1423 | .name = "mptspi", | |
1424 | .id_table = mptspi_pci_table, | |
1425 | .probe = mptspi_probe, | |
1426 | .remove = __devexit_p(mptscsih_remove), | |
d18c3db5 | 1427 | .shutdown = mptscsih_shutdown, |
243eabcf MED |
1428 | #ifdef CONFIG_PM |
1429 | .suspend = mptscsih_suspend, | |
6e1cad02 | 1430 | .resume = mptspi_resume, |
243eabcf MED |
1431 | #endif |
1432 | }; | |
1433 | ||
1434 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1435 | /** | |
d9489fb6 | 1436 | * mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer. |
243eabcf MED |
1437 | * |
1438 | * Returns 0 for success, non-zero for failure. | |
1439 | */ | |
1440 | static int __init | |
1441 | mptspi_init(void) | |
1442 | { | |
243eabcf MED |
1443 | show_mptmod_ver(my_NAME, my_VERSION); |
1444 | ||
c92f222e JB |
1445 | mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions); |
1446 | if (!mptspi_transport_template) | |
1447 | return -ENODEV; | |
1448 | ||
243eabcf MED |
1449 | mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER); |
1450 | mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER); | |
1451 | mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER); | |
1452 | ||
c92f222e | 1453 | if (mpt_event_register(mptspiDoneCtx, mptspi_event_process) == 0) { |
3a892bef | 1454 | devtverboseprintk((KERN_INFO MYNAM |
243eabcf MED |
1455 | ": Registered for IOC event notifications\n")); |
1456 | } | |
1457 | ||
6e1cad02 | 1458 | if (mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset) == 0) { |
243eabcf MED |
1459 | dprintk((KERN_INFO MYNAM |
1460 | ": Registered for IOC reset notifications\n")); | |
1461 | } | |
1462 | ||
1463 | return pci_register_driver(&mptspi_driver); | |
1464 | } | |
1465 | ||
1466 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1467 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
1468 | /** | |
1469 | * mptspi_exit - Unregisters MPT adapter(s) | |
243eabcf MED |
1470 | */ |
1471 | static void __exit | |
1472 | mptspi_exit(void) | |
1473 | { | |
1474 | pci_unregister_driver(&mptspi_driver); | |
d8e925dc | 1475 | |
243eabcf MED |
1476 | mpt_reset_deregister(mptspiDoneCtx); |
1477 | dprintk((KERN_INFO MYNAM | |
1478 | ": Deregistered for IOC reset notifications\n")); | |
1479 | ||
1480 | mpt_event_deregister(mptspiDoneCtx); | |
1481 | dprintk((KERN_INFO MYNAM | |
1482 | ": Deregistered for IOC event notifications\n")); | |
1483 | ||
1484 | mpt_deregister(mptspiInternalCtx); | |
1485 | mpt_deregister(mptspiTaskCtx); | |
1486 | mpt_deregister(mptspiDoneCtx); | |
c92f222e | 1487 | spi_release_transport(mptspi_transport_template); |
243eabcf MED |
1488 | } |
1489 | ||
1490 | module_init(mptspi_init); | |
1491 | module_exit(mptspi_exit); |