Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/message/fusion/mptbase.h | |
3 | * High performance SCSI + LAN / Fibre Channel device drivers. | |
4 | * For use with PCI chip/adapter(s): | |
5 | * LSIFC9xx/LSI409xx Fibre Channel | |
f36789e2 | 6 | * running LSI Fusion MPT (Message Passing Technology) firmware. |
1da177e4 | 7 | * |
f36789e2 | 8 | * Copyright (c) 1999-2007 LSI Corporation |
16d20101 | 9 | * (mailto:DL-MPTFusionLinux@lsi.com) |
1da177e4 | 10 | * |
1da177e4 LT |
11 | */ |
12 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
13 | /* | |
14 | This program is free software; you can redistribute it and/or modify | |
15 | it under the terms of the GNU General Public License as published by | |
16 | the Free Software Foundation; version 2 of the License. | |
17 | ||
18 | This program is distributed in the hope that it will be useful, | |
19 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | GNU General Public License for more details. | |
22 | ||
23 | NO WARRANTY | |
24 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
25 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
26 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
27 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
28 | solely responsible for determining the appropriateness of using and | |
29 | distributing the Program and assumes all risks associated with its | |
30 | exercise of rights under this Agreement, including but not limited to | |
31 | the risks and costs of program errors, damage to or loss of data, | |
32 | programs or equipment, and unavailability or interruption of operations. | |
33 | ||
34 | DISCLAIMER OF LIABILITY | |
35 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
36 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
37 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
38 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
39 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
40 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
41 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
42 | ||
43 | You should have received a copy of the GNU General Public License | |
44 | along with this program; if not, write to the Free Software | |
45 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
46 | */ | |
47 | ||
48 | #ifndef MPTBASE_H_INCLUDED | |
49 | #define MPTBASE_H_INCLUDED | |
50 | /*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
51 | ||
1da177e4 LT |
52 | #include <linux/kernel.h> |
53 | #include <linux/pci.h> | |
ed5f606f | 54 | #include <linux/mutex.h> |
1da177e4 LT |
55 | |
56 | #include "lsi/mpi_type.h" | |
57 | #include "lsi/mpi.h" /* Fusion MPI(nterface) basic defs */ | |
58 | #include "lsi/mpi_ioc.h" /* Fusion MPT IOC(ontroller) defs */ | |
59 | #include "lsi/mpi_cnfg.h" /* IOC configuration support */ | |
60 | #include "lsi/mpi_init.h" /* SCSI Host (initiator) protocol support */ | |
61 | #include "lsi/mpi_lan.h" /* LAN over FC protocol support */ | |
62 | #include "lsi/mpi_raid.h" /* Integrated Mirroring support */ | |
63 | ||
64 | #include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */ | |
65 | #include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */ | |
66 | #include "lsi/mpi_tool.h" /* Tools support */ | |
82ffb671 | 67 | #include "lsi/mpi_sas.h" /* SAS support */ |
1da177e4 LT |
68 | |
69 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
70 | ||
71 | #ifndef MODULEAUTHOR | |
f36789e2 | 72 | #define MODULEAUTHOR "LSI Corporation" |
1da177e4 LT |
73 | #endif |
74 | ||
75 | #ifndef COPYRIGHT | |
9f4203b3 | 76 | #define COPYRIGHT "Copyright (c) 1999-2007 " MODULEAUTHOR |
1da177e4 LT |
77 | #endif |
78 | ||
2b832247 EM |
79 | #define MPT_LINUX_VERSION_COMMON "3.04.06" |
80 | #define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.06" | |
1da177e4 LT |
81 | #define WHAT_MAGIC_STRING "@" "(" "#" ")" |
82 | ||
83 | #define show_mptmod_ver(s,ver) \ | |
84 | printk(KERN_INFO "%s %s\n", s, ver); | |
85 | ||
86 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
87 | /* | |
88 | * Fusion MPT(linux) driver configurable stuff... | |
89 | */ | |
90 | #define MPT_MAX_ADAPTERS 18 | |
91 | #define MPT_MAX_PROTOCOL_DRIVERS 16 | |
92 | #define MPT_MAX_BUS 1 /* Do not change */ | |
93 | #define MPT_MAX_FC_DEVICES 255 | |
94 | #define MPT_MAX_SCSI_DEVICES 16 | |
95 | #define MPT_LAST_LUN 255 | |
96 | #define MPT_SENSE_BUFFER_ALLOC 64 | |
97 | /* allow for 256 max sense alloc, but only 255 max request */ | |
98 | #if MPT_SENSE_BUFFER_ALLOC >= 256 | |
99 | # undef MPT_SENSE_BUFFER_ALLOC | |
100 | # define MPT_SENSE_BUFFER_ALLOC 256 | |
101 | # define MPT_SENSE_BUFFER_SIZE 255 | |
102 | #else | |
103 | # define MPT_SENSE_BUFFER_SIZE MPT_SENSE_BUFFER_ALLOC | |
104 | #endif | |
105 | ||
106 | #define MPT_NAME_LENGTH 32 | |
107 | ||
108 | #define MPT_PROCFS_MPTBASEDIR "mpt" | |
109 | /* chg it to "driver/fusion" ? */ | |
110 | #define MPT_PROCFS_SUMMARY_ALL_NODE MPT_PROCFS_MPTBASEDIR "/summary" | |
111 | #define MPT_PROCFS_SUMMARY_ALL_PATHNAME "/proc/" MPT_PROCFS_SUMMARY_ALL_NODE | |
112 | #define MPT_FW_REV_MAGIC_ID_STRING "FwRev=" | |
113 | ||
114 | #define MPT_MAX_REQ_DEPTH 1023 | |
115 | #define MPT_DEFAULT_REQ_DEPTH 256 | |
116 | #define MPT_MIN_REQ_DEPTH 128 | |
117 | ||
118 | #define MPT_MAX_REPLY_DEPTH MPT_MAX_REQ_DEPTH | |
119 | #define MPT_DEFAULT_REPLY_DEPTH 128 | |
120 | #define MPT_MIN_REPLY_DEPTH 8 | |
121 | #define MPT_MAX_REPLIES_PER_ISR 32 | |
122 | ||
123 | #define MPT_MAX_FRAME_SIZE 128 | |
124 | #define MPT_DEFAULT_FRAME_SIZE 128 | |
125 | ||
928496ac | 126 | #define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */ |
1da177e4 LT |
127 | |
128 | #define MPT_SG_REQ_128_SCALE 1 | |
129 | #define MPT_SG_REQ_96_SCALE 2 | |
130 | #define MPT_SG_REQ_64_SCALE 4 | |
131 | ||
132 | #define CAN_SLEEP 1 | |
133 | #define NO_SLEEP 0 | |
134 | ||
135 | #define MPT_COALESCING_TIMEOUT 0x10 | |
136 | ||
137 | /* | |
138 | * SCSI transfer rate defines. | |
139 | */ | |
140 | #define MPT_ULTRA320 0x08 | |
141 | #define MPT_ULTRA160 0x09 | |
142 | #define MPT_ULTRA2 0x0A | |
143 | #define MPT_ULTRA 0x0C | |
144 | #define MPT_FAST 0x19 | |
145 | #define MPT_SCSI 0x32 | |
146 | #define MPT_ASYNC 0xFF | |
147 | ||
148 | #define MPT_NARROW 0 | |
149 | #define MPT_WIDE 1 | |
150 | ||
151 | #define C0_1030 0x08 | |
152 | #define XL_929 0x01 | |
153 | ||
154 | ||
155 | /* | |
156 | * Try to keep these at 2^N-1 | |
157 | */ | |
158 | #define MPT_FC_CAN_QUEUE 127 | |
159 | #define MPT_SCSI_CAN_QUEUE 127 | |
160 | ||
161 | /* | |
162 | * Set the MAX_SGE value based on user input. | |
163 | */ | |
164 | #ifdef CONFIG_FUSION_MAX_SGE | |
165 | #if CONFIG_FUSION_MAX_SGE < 16 | |
166 | #define MPT_SCSI_SG_DEPTH 16 | |
167 | #elif CONFIG_FUSION_MAX_SGE > 128 | |
168 | #define MPT_SCSI_SG_DEPTH 128 | |
169 | #else | |
170 | #define MPT_SCSI_SG_DEPTH CONFIG_FUSION_MAX_SGE | |
171 | #endif | |
172 | #else | |
173 | #define MPT_SCSI_SG_DEPTH 40 | |
174 | #endif | |
175 | ||
c6c727a1 EM |
176 | /* debug print string length used for events and iocstatus */ |
177 | # define EVENT_DESCR_STR_SZ 100 | |
178 | ||
1da177e4 LT |
179 | #ifdef __KERNEL__ /* { */ |
180 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
181 | ||
182 | #include <linux/proc_fs.h> | |
183 | ||
184 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
185 | /* | |
186 | * Attempt semi-consistent error & warning msgs across | |
187 | * MPT drivers. NOTE: Users of these macro defs must | |
188 | * themselves define their own MYNAM. | |
189 | */ | |
c51d0bea | 190 | #define MYIOC_s_FMT MYNAM ": %s: " |
5c1b91b9 | 191 | #define MYIOC_s_DEBUG_FMT KERN_DEBUG MYNAM ": %s: " |
1da177e4 LT |
192 | #define MYIOC_s_INFO_FMT KERN_INFO MYNAM ": %s: " |
193 | #define MYIOC_s_NOTE_FMT KERN_NOTICE MYNAM ": %s: " | |
194 | #define MYIOC_s_WARN_FMT KERN_WARNING MYNAM ": %s: WARNING - " | |
195 | #define MYIOC_s_ERR_FMT KERN_ERR MYNAM ": %s: ERROR - " | |
196 | ||
232f08fc EM |
197 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
198 | /* | |
199 | * ATTO UL4D associated structures and defines | |
200 | */ | |
201 | #define ATTOFLAG_DISC 0x0001 | |
202 | #define ATTOFLAG_TAGGED 0x0002 | |
203 | #define ATTOFLAG_WIDE_ENB 0x0008 | |
204 | #define ATTOFLAG_ID_ENB 0x0010 | |
205 | #define ATTOFLAG_LUN_ENB 0x0060 | |
206 | ||
207 | typedef struct _ATTO_DEVICE_INFO | |
208 | { | |
209 | u8 Offset; /* 00h */ | |
210 | u8 Period; /* 01h */ | |
211 | u16 ATTOFlags; /* 02h */ | |
212 | } ATTO_DEVICE_INFO, MPI_POINTER PTR_ATTO_DEVICE_INFO, | |
213 | ATTODeviceInfo_t, MPI_POINTER pATTODeviceInfo_t; | |
214 | ||
215 | typedef struct _ATTO_CONFIG_PAGE_SCSI_PORT_2 | |
216 | { | |
217 | CONFIG_PAGE_HEADER Header; /* 00h */ | |
218 | u16 PortFlags; /* 04h */ | |
219 | u16 Unused1; /* 06h */ | |
220 | u32 Unused2; /* 08h */ | |
221 | ATTO_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ | |
222 | } fATTO_CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_ATTO_CONFIG_PAGE_SCSI_PORT_2, | |
223 | ATTO_SCSIPortPage2_t, MPI_POINTER pATTO_SCSIPortPage2_t; | |
224 | ||
225 | ||
1da177e4 LT |
226 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
227 | /* | |
228 | * MPT protocol driver defs... | |
229 | */ | |
230 | typedef enum { | |
231 | MPTBASE_DRIVER, /* MPT base class */ | |
232 | MPTCTL_DRIVER, /* MPT ioctl class */ | |
7fadc87e MED |
233 | MPTSPI_DRIVER, /* MPT SPI host class */ |
234 | MPTFC_DRIVER, /* MPT FC host class */ | |
235 | MPTSAS_DRIVER, /* MPT SAS host class */ | |
1da177e4 LT |
236 | MPTLAN_DRIVER, /* MPT LAN class */ |
237 | MPTSTM_DRIVER, /* MPT SCSI target mode class */ | |
238 | MPTUNKNOWN_DRIVER | |
239 | } MPT_DRIVER_CLASS; | |
240 | ||
241 | struct mpt_pci_driver{ | |
242 | int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); | |
243 | void (*remove) (struct pci_dev *dev); | |
1da177e4 LT |
244 | }; |
245 | ||
246 | /* | |
247 | * MPT adapter / port / bus / device info structures... | |
248 | */ | |
249 | ||
250 | typedef union _MPT_FRAME_TRACKER { | |
251 | struct { | |
252 | struct list_head list; | |
253 | u32 arg1; | |
254 | u32 pad; | |
255 | void *argp1; | |
256 | } linkage; | |
257 | /* | |
258 | * NOTE: When request frames are free, on the linkage structure | |
259 | * contets are valid. All other values are invalid. | |
260 | * In particular, do NOT reply on offset [2] | |
261 | * (in words) being the * message context. | |
262 | * The message context must be reset (computed via base address | |
263 | * + an offset) prior to issuing any command. | |
264 | * | |
265 | * NOTE2: On non-32-bit systems, where pointers are LARGE, | |
266 | * using the linkage pointers destroys our sacred MsgContext | |
267 | * field contents. But we don't care anymore because these | |
268 | * are now reset in mpt_put_msg_frame() just prior to sending | |
269 | * a request off to the IOC. | |
270 | */ | |
271 | struct { | |
272 | u32 __hdr[2]; | |
273 | /* | |
274 | * The following _MUST_ match the location of the | |
275 | * MsgContext field in the MPT message headers. | |
276 | */ | |
277 | union { | |
278 | u32 MsgContext; | |
279 | struct { | |
280 | u16 req_idx; /* Request index */ | |
281 | u8 cb_idx; /* callback function index */ | |
282 | u8 rsvd; | |
283 | } fld; | |
284 | } msgctxu; | |
285 | } hwhdr; | |
286 | /* | |
287 | * Remark: 32 bit identifier: | |
288 | * 31-24: reserved | |
289 | * 23-16: call back index | |
290 | * 15-0 : request index | |
291 | */ | |
292 | } MPT_FRAME_TRACKER; | |
293 | ||
294 | /* | |
295 | * We might want to view/access a frame as: | |
296 | * 1) generic request header | |
297 | * 2) SCSIIORequest | |
298 | * 3) SCSIIOReply | |
299 | * 4) MPIDefaultReply | |
300 | * 5) frame tracker | |
301 | */ | |
302 | typedef struct _MPT_FRAME_HDR { | |
303 | union { | |
304 | MPIHeader_t hdr; | |
305 | SCSIIORequest_t scsireq; | |
306 | SCSIIOReply_t sreply; | |
307 | ConfigReply_t configreply; | |
308 | MPIDefaultReply_t reply; | |
309 | MPT_FRAME_TRACKER frame; | |
310 | } u; | |
311 | } MPT_FRAME_HDR; | |
312 | ||
313 | #define MPT_REQ_MSGFLAGS_DROPME 0x80 | |
314 | ||
315 | typedef struct _MPT_SGL_HDR { | |
316 | SGESimple32_t sge[1]; | |
317 | } MPT_SGL_HDR; | |
318 | ||
319 | typedef struct _MPT_SGL64_HDR { | |
320 | SGESimple64_t sge[1]; | |
321 | } MPT_SGL64_HDR; | |
322 | ||
323 | /* | |
324 | * System interface register set | |
325 | */ | |
326 | ||
327 | typedef struct _SYSIF_REGS | |
328 | { | |
329 | u32 Doorbell; /* 00 System<->IOC Doorbell reg */ | |
330 | u32 WriteSequence; /* 04 Write Sequence register */ | |
331 | u32 Diagnostic; /* 08 Diagnostic register */ | |
332 | u32 TestBase; /* 0C Test Base Address */ | |
333 | u32 DiagRwData; /* 10 Read Write Data (fw download) */ | |
334 | u32 DiagRwAddress; /* 14 Read Write Address (fw download)*/ | |
335 | u32 Reserved1[6]; /* 18-2F reserved for future use */ | |
336 | u32 IntStatus; /* 30 Interrupt Status */ | |
337 | u32 IntMask; /* 34 Interrupt Mask */ | |
338 | u32 Reserved2[2]; /* 38-3F reserved for future use */ | |
339 | u32 RequestFifo; /* 40 Request Post/Free FIFO */ | |
340 | u32 ReplyFifo; /* 44 Reply Post/Free FIFO */ | |
7a195f46 PS |
341 | u32 RequestHiPriFifo; /* 48 Hi Priority Request FIFO */ |
342 | u32 Reserved3; /* 4C-4F reserved for future use */ | |
1da177e4 LT |
343 | u32 HostIndex; /* 50 Host Index register */ |
344 | u32 Reserved4[15]; /* 54-8F */ | |
345 | u32 Fubar; /* 90 For Fubar usage */ | |
3dc0b03f EM |
346 | u32 Reserved5[1050];/* 94-10F8 */ |
347 | u32 Reset_1078; /* 10FC Reset 1078 */ | |
1da177e4 LT |
348 | } SYSIF_REGS; |
349 | ||
350 | /* | |
351 | * NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h | |
352 | * in conjunction with SYSIF_REGS accesses! | |
353 | */ | |
354 | ||
355 | ||
356 | /* | |
357 | * Dynamic Multi-Pathing specific stuff... | |
358 | */ | |
359 | ||
c7c82987 | 360 | /* VirtTarget negoFlags field */ |
1da177e4 LT |
361 | #define MPT_TARGET_NO_NEGO_WIDE 0x01 |
362 | #define MPT_TARGET_NO_NEGO_SYNC 0x02 | |
363 | #define MPT_TARGET_NO_NEGO_QAS 0x04 | |
364 | #define MPT_TAPE_NEGO_IDP 0x08 | |
365 | ||
366 | /* | |
367 | * VirtDevice - FC LUN device or SCSI target device | |
368 | */ | |
c7c82987 | 369 | typedef struct _VirtTarget { |
c92f222e | 370 | struct scsi_target *starget; |
1da177e4 LT |
371 | u8 tflags; |
372 | u8 ioc_id; | |
793955f5 EM |
373 | u8 id; |
374 | u8 channel; | |
1da177e4 LT |
375 | u8 minSyncFactor; /* 0xFF is async */ |
376 | u8 maxOffset; /* 0 if async */ | |
377 | u8 maxWidth; /* 0 if narrow, 1 if wide */ | |
378 | u8 negoFlags; /* bit field, see above */ | |
379 | u8 raidVolume; /* set, if RAID Volume */ | |
380 | u8 type; /* byte 0 of Inquiry data */ | |
547f9a21 | 381 | u8 deleted; /* target in process of being removed */ |
1da177e4 | 382 | u32 num_luns; |
c7c82987 MED |
383 | } VirtTarget; |
384 | ||
385 | typedef struct _VirtDevice { | |
914c2d8e | 386 | VirtTarget *vtarget; |
c7c82987 | 387 | u8 configured_lun; |
793955f5 | 388 | int lun; |
1da177e4 LT |
389 | } VirtDevice; |
390 | ||
391 | /* | |
392 | * Fibre Channel (SCSI) target device and associated defines... | |
393 | */ | |
394 | #define MPT_TARGET_DEFAULT_DV_STATUS 0x00 | |
395 | #define MPT_TARGET_FLAGS_VALID_NEGO 0x01 | |
396 | #define MPT_TARGET_FLAGS_VALID_INQUIRY 0x02 | |
397 | #define MPT_TARGET_FLAGS_Q_YES 0x08 | |
398 | #define MPT_TARGET_FLAGS_VALID_56 0x10 | |
399 | #define MPT_TARGET_FLAGS_SAF_TE_ISSUED 0x20 | |
c92f222e | 400 | #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x40 |
786899b0 | 401 | #define MPT_TARGET_FLAGS_LED_ON 0x80 |
1da177e4 LT |
402 | |
403 | /* | |
404 | * /proc/mpt interface | |
405 | */ | |
406 | typedef struct { | |
407 | const char *name; | |
408 | mode_t mode; | |
409 | int pad; | |
410 | read_proc_t *read_proc; | |
411 | write_proc_t *write_proc; | |
412 | } mpt_proc_entry_t; | |
413 | ||
414 | #define MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len) \ | |
415 | do { \ | |
416 | len -= offset; \ | |
417 | if (len < request) { \ | |
418 | *eof = 1; \ | |
419 | if (len <= 0) \ | |
420 | return 0; \ | |
421 | } else \ | |
422 | len = request; \ | |
423 | *start = buf + offset; \ | |
424 | return len; \ | |
425 | } while (0) | |
426 | ||
427 | ||
428 | /* | |
429 | * IOCTL structure and associated defines | |
430 | */ | |
431 | ||
432 | #define MPT_IOCTL_STATUS_DID_IOCRESET 0x01 /* IOC Reset occurred on the current*/ | |
433 | #define MPT_IOCTL_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */ | |
434 | #define MPT_IOCTL_STATUS_TIMER_ACTIVE 0x04 /* The timer is running */ | |
435 | #define MPT_IOCTL_STATUS_SENSE_VALID 0x08 /* Sense data is valid */ | |
436 | #define MPT_IOCTL_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */ | |
437 | #define MPT_IOCTL_STATUS_TMTIMER_ACTIVE 0x20 /* The TM timer is running */ | |
438 | #define MPT_IOCTL_STATUS_TM_FAILED 0x40 /* User TM request failed */ | |
439 | ||
440 | #define MPTCTL_RESET_OK 0x01 /* Issue Bus Reset */ | |
441 | ||
442 | typedef struct _MPT_IOCTL { | |
443 | struct _MPT_ADAPTER *ioc; | |
444 | u8 ReplyFrame[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */ | |
445 | u8 sense[MPT_SENSE_BUFFER_ALLOC]; | |
446 | int wait_done; /* wake-up value for this ioc */ | |
447 | u8 rsvd; | |
448 | u8 status; /* current command status */ | |
449 | u8 reset; /* 1 if bus reset allowed */ | |
793955f5 | 450 | u8 id; /* target for reset */ |
eeb846ce | 451 | struct mutex ioctl_mutex; |
1da177e4 LT |
452 | } MPT_IOCTL; |
453 | ||
da4fa655 CH |
454 | #define MPT_SAS_MGMT_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */ |
455 | #define MPT_SAS_MGMT_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */ | |
456 | #define MPT_SAS_MGMT_STATUS_TM_FAILED 0x40 /* User TM request failed */ | |
457 | ||
458 | typedef struct _MPT_SAS_MGMT { | |
eeb846ce | 459 | struct mutex mutex; |
da4fa655 CH |
460 | struct completion done; |
461 | u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */ | |
462 | u8 status; /* current command status */ | |
463 | }MPT_SAS_MGMT; | |
464 | ||
1da177e4 LT |
465 | /* |
466 | * Event Structure and define | |
467 | */ | |
466544d8 | 468 | #define MPTCTL_EVENT_LOG_SIZE (0x000000032) |
1da177e4 LT |
469 | typedef struct _mpt_ioctl_events { |
470 | u32 event; /* Specified by define above */ | |
471 | u32 eventContext; /* Index or counter */ | |
3d9780b9 | 472 | u32 data[2]; /* First 8 bytes of Event Data */ |
1da177e4 LT |
473 | } MPT_IOCTL_EVENTS; |
474 | ||
475 | /* | |
476 | * CONFIGPARM status defines | |
477 | */ | |
478 | #define MPT_CONFIG_GOOD MPI_IOCSTATUS_SUCCESS | |
479 | #define MPT_CONFIG_ERROR 0x002F | |
480 | ||
481 | /* | |
482 | * Substructure to store SCSI specific configuration page data | |
483 | */ | |
484 | /* dvStatus defines: */ | |
1da177e4 LT |
485 | #define MPT_SCSICFG_USE_NVRAM 0x01 /* WriteSDP1 using NVRAM */ |
486 | #define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */ | |
487 | /* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */ | |
488 | ||
466544d8 | 489 | typedef struct _SpiCfgData { |
1da177e4 LT |
490 | u32 PortFlags; |
491 | int *nvram; /* table of device NVRAM values */ | |
1da177e4 LT |
492 | IOCPage4_t *pIocPg4; /* SEP devices addressing */ |
493 | dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */ | |
494 | int IocPg4Sz; /* IOCPage4 size */ | |
1da177e4 LT |
495 | u8 minSyncFactor; /* 0xFF if async */ |
496 | u8 maxSyncOffset; /* 0 if async */ | |
497 | u8 maxBusWidth; /* 0 if narrow, 1 if wide */ | |
498 | u8 busType; /* SE, LVD, HD */ | |
499 | u8 sdp1version; /* SDP1 version */ | |
500 | u8 sdp1length; /* SDP1 length */ | |
501 | u8 sdp0version; /* SDP0 version */ | |
502 | u8 sdp0length; /* SDP0 length */ | |
503 | u8 dvScheduled; /* 1 if scheduled */ | |
1da177e4 | 504 | u8 noQas; /* Disable QAS for this adapter */ |
466544d8 MED |
505 | u8 Saf_Te; /* 1 to force all Processors as |
506 | * SAF-TE if Inquiry data length | |
507 | * is too short to check for SAF-TE | |
508 | */ | |
466544d8 | 509 | u8 bus_reset; /* 1 to allow bus reset */ |
1da177e4 | 510 | u8 rsvd[1]; |
466544d8 | 511 | }SpiCfgData; |
1da177e4 | 512 | |
82ffb671 CH |
513 | typedef struct _SasCfgData { |
514 | u8 ptClear; /* 1 to automatically clear the | |
515 | * persistent table. | |
516 | * 0 to disable | |
517 | * automatic clearing. | |
518 | */ | |
519 | }SasCfgData; | |
520 | ||
b506ade9 EM |
521 | /* |
522 | * Inactive volume link list of raid component data | |
523 | * @inactive_list | |
524 | */ | |
525 | struct inactive_raid_component_info { | |
526 | struct list_head list; | |
527 | u8 volumeID; /* volume target id */ | |
528 | u8 volumeBus; /* volume channel */ | |
529 | IOC_3_PHYS_DISK d; /* phys disk info */ | |
530 | }; | |
531 | ||
466544d8 MED |
532 | typedef struct _RaidCfgData { |
533 | IOCPage2_t *pIocPg2; /* table of Raid Volumes */ | |
534 | IOCPage3_t *pIocPg3; /* table of physical disks */ | |
ed5f606f | 535 | struct mutex inactive_list_mutex; |
b506ade9 EM |
536 | struct list_head inactive_list; /* link list for physical |
537 | disk that belong in | |
538 | inactive volumes */ | |
466544d8 MED |
539 | }RaidCfgData; |
540 | ||
ca2f938e MR |
541 | typedef struct _FcCfgData { |
542 | /* will ultimately hold fc_port_page0 also */ | |
543 | struct { | |
544 | FCPortPage1_t *data; | |
545 | dma_addr_t dma; | |
546 | int pg_sz; | |
547 | } fc_port_page1[2]; | |
548 | } FcCfgData; | |
549 | ||
05e8ec17 MR |
550 | #define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */ |
551 | #define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */ | |
05e8ec17 MR |
552 | |
553 | /* | |
554 | * data allocated for each fc rport device | |
555 | */ | |
556 | struct mptfc_rport_info | |
557 | { | |
558 | struct list_head list; | |
559 | struct fc_rport *rport; | |
3bc7bf1d | 560 | struct scsi_target *starget; |
05e8ec17 MR |
561 | FCDevicePage0_t pg0; |
562 | u8 flags; | |
563 | }; | |
564 | ||
1da177e4 LT |
565 | /* |
566 | * Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS | |
567 | */ | |
568 | typedef struct _MPT_ADAPTER | |
569 | { | |
570 | int id; /* Unique adapter id N {0,1,2,...} */ | |
571 | int pci_irq; /* This irq */ | |
572 | char name[MPT_NAME_LENGTH]; /* "iocN" */ | |
ef1d8df7 | 573 | char prod_name[MPT_NAME_LENGTH]; /* "LSIFC9x9" */ |
edb9068d PS |
574 | char board_name[16]; |
575 | char board_assembly[16]; | |
576 | char board_tracer[16]; | |
577 | u16 nvdata_version_persistent; | |
578 | u16 nvdata_version_default; | |
5c1b91b9 | 579 | int debug_level; |
edb9068d PS |
580 | u8 io_missing_delay; |
581 | u8 device_missing_delay; | |
1da177e4 LT |
582 | SYSIF_REGS __iomem *chip; /* == c8817000 (mmap) */ |
583 | SYSIF_REGS __iomem *pio_chip; /* Programmed IO (downloadboot) */ | |
584 | u8 bus_type; | |
585 | u32 mem_phys; /* == f4020000 (mmap) */ | |
586 | u32 pio_mem_phys; /* Programmed IO (downloadboot) */ | |
587 | int mem_size; /* mmap memory size */ | |
793955f5 EM |
588 | int number_of_buses; |
589 | int devices_per_bus; | |
1da177e4 LT |
590 | int alloc_total; |
591 | u32 last_state; | |
592 | int active; | |
593 | u8 *alloc; /* frames alloc ptr */ | |
594 | dma_addr_t alloc_dma; | |
595 | u32 alloc_sz; | |
596 | MPT_FRAME_HDR *reply_frames; /* Reply msg frames - rounded up! */ | |
597 | u32 reply_frames_low_dma; | |
598 | int reply_depth; /* Num Allocated reply frames */ | |
599 | int reply_sz; /* Reply frame size */ | |
600 | int num_chain; /* Number of chain buffers */ | |
601 | /* Pool of buffers for chaining. ReqToChain | |
602 | * and ChainToChain track index of chain buffers. | |
603 | * ChainBuffer (DMA) virt/phys addresses. | |
604 | * FreeChainQ (lock) locking mechanisms. | |
605 | */ | |
606 | int *ReqToChain; | |
607 | int *RequestNB; | |
608 | int *ChainToChain; | |
609 | u8 *ChainBuffer; | |
610 | dma_addr_t ChainBufferDMA; | |
611 | struct list_head FreeChainQ; | |
612 | spinlock_t FreeChainQlock; | |
613 | /* We (host driver) get to manage our own RequestQueue! */ | |
614 | dma_addr_t req_frames_dma; | |
615 | MPT_FRAME_HDR *req_frames; /* Request msg frames - rounded up! */ | |
616 | u32 req_frames_low_dma; | |
617 | int req_depth; /* Number of request frames */ | |
618 | int req_sz; /* Request frame size (bytes) */ | |
619 | spinlock_t FreeQlock; | |
620 | struct list_head FreeQ; | |
621 | /* Pool of SCSI sense buffers for commands coming from | |
622 | * the SCSI mid-layer. We have one 256 byte sense buffer | |
623 | * for each REQ entry. | |
624 | */ | |
625 | u8 *sense_buf_pool; | |
626 | dma_addr_t sense_buf_pool_dma; | |
627 | u32 sense_buf_low_dma; | |
82ffb671 CH |
628 | u8 *HostPageBuffer; /* SAS - host page buffer support */ |
629 | u32 HostPageBuffer_sz; | |
630 | dma_addr_t HostPageBuffer_dma; | |
1da177e4 LT |
631 | int mtrr_reg; |
632 | struct pci_dev *pcidev; /* struct pci_dev pointer */ | |
e78d5b8f | 633 | int bars; /* bitmask of BAR's that must be configured */ |
23a274c8 | 634 | int msi_enable; |
1da177e4 LT |
635 | u8 __iomem *memmap; /* mmap address */ |
636 | struct Scsi_Host *sh; /* Scsi Host pointer */ | |
466544d8 MED |
637 | SpiCfgData spi_data; /* Scsi config. data */ |
638 | RaidCfgData raid_data; /* Raid config. data */ | |
82ffb671 | 639 | SasCfgData sas_data; /* Sas config. data */ |
ca2f938e | 640 | FcCfgData fc_data; /* Fc config. data */ |
1da177e4 LT |
641 | MPT_IOCTL *ioctl; /* ioctl data pointer */ |
642 | struct proc_dir_entry *ioc_dentry; | |
643 | struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */ | |
644 | spinlock_t diagLock; /* diagnostic reset lock */ | |
645 | int diagPending; | |
646 | u32 biosVersion; /* BIOS version from IO Unit Page 2 */ | |
647 | int eventTypes; /* Event logging parameters */ | |
648 | int eventContext; /* Next event context */ | |
649 | int eventLogSize; /* Max number of cached events */ | |
650 | struct _mpt_ioctl_events *events; /* pointer to event log */ | |
651 | u8 *cached_fw; /* Pointer to FW */ | |
652 | dma_addr_t cached_fw_dma; | |
653 | struct list_head configQ; /* linked list of config. requests */ | |
654 | int hs_reply_idx; | |
655 | #ifndef MFCNT | |
656 | u32 pad0; | |
657 | #else | |
658 | u32 mfcnt; | |
659 | #endif | |
82ffb671 | 660 | u32 NB_for_64_byte_frame; |
1da177e4 LT |
661 | u32 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)]; |
662 | u16 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)]; | |
663 | IOCFactsReply_t facts; | |
664 | PortFactsReply_t pfacts[2]; | |
665 | FCPortPage0_t fc_port_page0[2]; | |
82ffb671 CH |
666 | struct timer_list persist_timer; /* persist table timer */ |
667 | int persist_wait_done; /* persist completion flag */ | |
668 | u8 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */ | |
1da177e4 LT |
669 | LANPage0_t lan_cnfg_page0; |
670 | LANPage1_t lan_cnfg_page1; | |
b506ade9 EM |
671 | |
672 | u8 ir_firmware; /* =1 if IR firmware detected */ | |
82ffb671 | 673 | /* |
3fadc59d MED |
674 | * Description: errata_flag_1064 |
675 | * If a PCIX read occurs within 1 or 2 cycles after the chip receives | |
676 | * a split completion for a read data, an internal address pointer incorrectly | |
677 | * increments by 32 bytes | |
678 | */ | |
82ffb671 | 679 | int errata_flag_1064; |
ea5a7a82 | 680 | int aen_event_read_flag; /* flag to indicate event log was read*/ |
1da177e4 LT |
681 | u8 FirstWhoInit; |
682 | u8 upload_fw; /* If set, do a fw upload */ | |
683 | u8 reload_fw; /* Force a FW Reload on next reset */ | |
82ffb671 | 684 | u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ |
1da177e4 | 685 | u8 pad1[4]; |
f606f571 PS |
686 | u8 DoneCtx; |
687 | u8 TaskCtx; | |
688 | u8 InternalCtx; | |
2a238ea5 MED |
689 | spinlock_t initializing_hba_lock; |
690 | int initializing_hba_lock_flag; | |
82ffb671 | 691 | struct list_head list; |
1da177e4 | 692 | struct net_device *netdev; |
82ffb671 | 693 | struct list_head sas_topology; |
9a28f49a | 694 | struct mutex sas_topology_mutex; |
e6b2d76a ME |
695 | struct mutex sas_discovery_mutex; |
696 | u8 sas_discovery_runtime; | |
697 | u8 sas_discovery_ignore_events; | |
698 | int sas_index; /* index refrencing */ | |
da4fa655 | 699 | MPT_SAS_MGMT sas_mgmt; |
547f9a21 | 700 | struct work_struct sas_persist_task; |
05e8ec17 | 701 | |
419835e2 | 702 | struct work_struct fc_setup_reset_work; |
05e8ec17 | 703 | struct list_head fc_rports; |
eb5329f4 PS |
704 | struct work_struct fc_lsc_work; |
705 | u8 fc_link_speed[2]; | |
05e8ec17 | 706 | spinlock_t fc_rescan_work_lock; |
05e8ec17 | 707 | struct work_struct fc_rescan_work; |
65207fed ME |
708 | char fc_rescan_work_q_name[KOBJ_NAME_LEN]; |
709 | struct workqueue_struct *fc_rescan_work_q; | |
e8206381 EM |
710 | struct scsi_cmnd **ScsiLookup; |
711 | spinlock_t scsi_lookup_lock; | |
1da177e4 LT |
712 | } MPT_ADAPTER; |
713 | ||
714 | /* | |
715 | * New return value convention: | |
716 | * 1 = Ok to free associated request frame | |
717 | * 0 = not Ok ... | |
718 | */ | |
719 | typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); | |
720 | typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply); | |
721 | typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase); | |
722 | /* reset_phase defs */ | |
723 | #define MPT_IOC_PRE_RESET 0 | |
724 | #define MPT_IOC_POST_RESET 1 | |
725 | #define MPT_IOC_SETUP_RESET 2 | |
726 | ||
727 | /* | |
728 | * Invent MPT host event (super-set of MPI Events) | |
729 | * Fitted to 1030's 64-byte [max] request frame size | |
730 | */ | |
731 | typedef struct _MPT_HOST_EVENT { | |
732 | EventNotificationReply_t MpiEvent; /* 8 32-bit words! */ | |
733 | u32 pad[6]; | |
734 | void *next; | |
735 | } MPT_HOST_EVENT; | |
736 | ||
737 | #define MPT_HOSTEVENT_IOC_BRINGUP 0x91 | |
738 | #define MPT_HOSTEVENT_IOC_RECOVER 0x92 | |
739 | ||
740 | /* Define the generic types based on the size | |
741 | * of the dma_addr_t type. | |
742 | */ | |
743 | typedef struct _mpt_sge { | |
744 | u32 FlagsLength; | |
745 | dma_addr_t Address; | |
746 | } MptSge_t; | |
747 | ||
748 | #define mpt_addr_size() \ | |
749 | ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \ | |
750 | MPI_SGE_FLAGS_32_BIT_ADDRESSING) | |
751 | ||
752 | #define mpt_msg_flags() \ | |
753 | ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \ | |
754 | MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32) | |
755 | ||
756 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
757 | /* | |
758 | * Funky (private) macros... | |
759 | */ | |
5c1b91b9 | 760 | #include "mptdebug.h" |
1da177e4 LT |
761 | |
762 | #define MPT_INDEX_2_MFPTR(ioc,idx) \ | |
763 | (MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) ) | |
764 | ||
765 | #define MFPTR_2_MPT_INDEX(ioc,mf) \ | |
766 | (int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz ) | |
767 | ||
768 | #define MPT_INDEX_2_RFPTR(ioc,idx) \ | |
769 | (MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) ) | |
770 | ||
1da177e4 LT |
771 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
772 | ||
773 | #define SCSI_STD_SENSE_BYTES 18 | |
774 | #define SCSI_STD_INQUIRY_BYTES 36 | |
775 | #define SCSI_MAX_INQUIRY_BYTES 96 | |
776 | ||
777 | /* | |
778 | * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers | |
779 | * Private to the driver. | |
780 | */ | |
781 | /* LOCAL structure and fields used when processing | |
782 | * internally generated commands. These include: | |
783 | * bus scan, dv and config requests. | |
784 | */ | |
785 | typedef struct _MPT_LOCAL_REPLY { | |
786 | ConfigPageHeader_t header; | |
787 | int completion; | |
788 | u8 sense[SCSI_STD_SENSE_BYTES]; | |
789 | u8 scsiStatus; | |
790 | u8 skip; | |
791 | u32 pad; | |
792 | } MPT_LOCAL_REPLY; | |
793 | ||
794 | #define MPT_HOST_BUS_UNKNOWN (0xFF) | |
795 | #define MPT_HOST_TOO_MANY_TM (0x05) | |
796 | #define MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) | |
797 | #define MPT_HOST_NO_CHAIN (0xFFFFFFFF) | |
798 | #define MPT_NVRAM_MASK_TIMEOUT (0x000000FF) | |
799 | #define MPT_NVRAM_SYNC_MASK (0x0000FF00) | |
800 | #define MPT_NVRAM_SYNC_SHIFT (8) | |
801 | #define MPT_NVRAM_DISCONNECT_ENABLE (0x00010000) | |
802 | #define MPT_NVRAM_ID_SCAN_ENABLE (0x00020000) | |
803 | #define MPT_NVRAM_LUN_SCAN_ENABLE (0x00040000) | |
804 | #define MPT_NVRAM_TAG_QUEUE_ENABLE (0x00080000) | |
805 | #define MPT_NVRAM_WIDE_DISABLE (0x00100000) | |
806 | #define MPT_NVRAM_BOOT_CHOICE (0x00200000) | |
807 | ||
808 | /* The TM_STATE variable is used to provide strict single threading of TM | |
809 | * requests as well as communicate TM error conditions. | |
810 | */ | |
811 | #define TM_STATE_NONE (0) | |
812 | #define TM_STATE_IN_PROGRESS (1) | |
813 | #define TM_STATE_ERROR (2) | |
814 | ||
815 | typedef enum { | |
816 | FC, | |
a9b2937a | 817 | SPI, |
1da177e4 LT |
818 | SAS |
819 | } BUS_TYPE; | |
820 | ||
821 | typedef struct _MPT_SCSI_HOST { | |
822 | MPT_ADAPTER *ioc; | |
823 | int port; | |
824 | u32 pad0; | |
1da177e4 LT |
825 | MPT_LOCAL_REPLY *pLocal; /* used for internal commands */ |
826 | struct timer_list timer; | |
827 | /* Pool of memory for holding SCpnts before doing | |
828 | * OS callbacks. freeQ is the free pool. | |
829 | */ | |
830 | u8 tmPending; | |
831 | u8 resetPending; | |
832 | u8 negoNvram; /* DV disabled, nego NVRAM */ | |
833 | u8 pad1; | |
834 | u8 tmState; | |
835 | u8 rsvd[2]; | |
836 | MPT_FRAME_HDR *cmdPtr; /* Ptr to nonOS request */ | |
837 | struct scsi_cmnd *abortSCpnt; | |
838 | MPT_LOCAL_REPLY localReply; /* internal cmd reply struct */ | |
839 | unsigned long hard_resets; /* driver forced bus resets count */ | |
840 | unsigned long soft_resets; /* fw/external bus resets count */ | |
841 | unsigned long timeouts; /* cmd timeouts */ | |
842 | ushort sel_timeout[MPT_MAX_FC_DEVICES]; | |
7fadc87e MED |
843 | char *info_kbuf; |
844 | wait_queue_head_t scandv_waitq; | |
845 | int scandv_wait_done; | |
846 | long last_queue_full; | |
3dc0b03f | 847 | u16 tm_iocstatus; |
72978245 | 848 | u16 spi_pending; |
df9e062a | 849 | struct list_head target_reset_list; |
1da177e4 LT |
850 | } MPT_SCSI_HOST; |
851 | ||
852 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
853 | /* | |
854 | * More Dynamic Multi-Pathing stuff... | |
855 | */ | |
856 | ||
857 | /* Forward decl, a strange C thing, to prevent gcc compiler warnings */ | |
858 | struct scsi_cmnd; | |
859 | ||
860 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
861 | /* | |
862 | * Generic structure passed to the base mpt_config function. | |
863 | */ | |
864 | typedef struct _x_config_parms { | |
865 | struct list_head linkage; /* linked list */ | |
866 | struct timer_list timer; /* timer function for this request */ | |
69218ee5 CH |
867 | union { |
868 | ConfigExtendedPageHeader_t *ehdr; | |
869 | ConfigPageHeader_t *hdr; | |
870 | } cfghdr; | |
1da177e4 LT |
871 | dma_addr_t physAddr; |
872 | int wait_done; /* wait for this request */ | |
873 | u32 pageAddr; /* properly formatted */ | |
874 | u8 action; | |
875 | u8 dir; | |
876 | u8 timeout; /* seconds */ | |
877 | u8 pad1; | |
878 | u16 status; | |
879 | u16 pad2; | |
880 | } CONFIGPARMS; | |
881 | ||
882 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
883 | /* | |
884 | * Public entry points... | |
885 | */ | |
7fadc87e MED |
886 | extern int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id); |
887 | extern void mpt_detach(struct pci_dev *pdev); | |
888 | #ifdef CONFIG_PM | |
889 | extern int mpt_suspend(struct pci_dev *pdev, pm_message_t state); | |
890 | extern int mpt_resume(struct pci_dev *pdev); | |
891 | #endif | |
f606f571 PS |
892 | extern u8 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass); |
893 | extern void mpt_deregister(u8 cb_idx); | |
894 | extern int mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc); | |
895 | extern void mpt_event_deregister(u8 cb_idx); | |
896 | extern int mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func); | |
897 | extern void mpt_reset_deregister(u8 cb_idx); | |
898 | extern int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx); | |
899 | extern void mpt_device_driver_deregister(u8 cb_idx); | |
900 | extern MPT_FRAME_HDR *mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc); | |
1da177e4 | 901 | extern void mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); |
f606f571 PS |
902 | extern void mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); |
903 | extern void mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf); | |
1da177e4 LT |
904 | extern void mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr); |
905 | ||
f606f571 | 906 | extern int mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag); |
1da177e4 LT |
907 | extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp); |
908 | extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); | |
909 | extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan); | |
910 | extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); | |
911 | extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); | |
984621b4 | 912 | extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); |
1da177e4 LT |
913 | extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); |
914 | extern int mpt_findImVolumes(MPT_ADAPTER *ioc); | |
82ffb671 | 915 | extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); |
b506ade9 | 916 | extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk); |
1da177e4 LT |
917 | |
918 | /* | |
919 | * Public data decl's... | |
920 | */ | |
921 | extern struct list_head ioc_list; | |
f747307e | 922 | extern struct proc_dir_entry *mpt_proc_root_dir; |
1da177e4 | 923 | |
1da177e4 LT |
924 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
925 | #endif /* } __KERNEL__ */ | |
926 | ||
2939deaa | 927 | #ifdef CONFIG_64BIT |
1da177e4 LT |
928 | #define CAST_U32_TO_PTR(x) ((void *)(u64)x) |
929 | #define CAST_PTR_TO_U32(x) ((u32)(u64)x) | |
930 | #else | |
931 | #define CAST_U32_TO_PTR(x) ((void *)x) | |
932 | #define CAST_PTR_TO_U32(x) ((u32)x) | |
933 | #endif | |
934 | ||
935 | #define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \ | |
936 | ((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR) ? 'I' : 'i', \ | |
937 | ((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET) ? 'T' : 't', \ | |
938 | ((pflags) & MPI_PORTFACTS_PROTOCOL_LAN) ? 'L' : 'l', \ | |
939 | ((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) ? 'B' : 'b' | |
940 | ||
941 | /* | |
942 | * Shifted SGE Defines - Use in SGE with FlagsLength member. | |
943 | * Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header). | |
944 | * Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read | |
945 | */ | |
946 | #define MPT_TRANSFER_IOC_TO_HOST (0x00000000) | |
947 | #define MPT_TRANSFER_HOST_TO_IOC (0x04000000) | |
948 | #define MPT_SGE_FLAGS_LAST_ELEMENT (0x80000000) | |
949 | #define MPT_SGE_FLAGS_END_OF_BUFFER (0x40000000) | |
950 | #define MPT_SGE_FLAGS_LOCAL_ADDRESS (0x08000000) | |
951 | #define MPT_SGE_FLAGS_DIRECTION (0x04000000) | |
952 | #define MPT_SGE_FLAGS_ADDRESSING (mpt_addr_size() << MPI_SGE_FLAGS_SHIFT) | |
953 | #define MPT_SGE_FLAGS_END_OF_LIST (0x01000000) | |
954 | ||
955 | #define MPT_SGE_FLAGS_TRANSACTION_ELEMENT (0x00000000) | |
956 | #define MPT_SGE_FLAGS_SIMPLE_ELEMENT (0x10000000) | |
957 | #define MPT_SGE_FLAGS_CHAIN_ELEMENT (0x30000000) | |
958 | #define MPT_SGE_FLAGS_ELEMENT_MASK (0x30000000) | |
959 | ||
960 | #define MPT_SGE_FLAGS_SSIMPLE_READ \ | |
961 | (MPT_SGE_FLAGS_LAST_ELEMENT | \ | |
962 | MPT_SGE_FLAGS_END_OF_BUFFER | \ | |
963 | MPT_SGE_FLAGS_END_OF_LIST | \ | |
964 | MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ | |
965 | MPT_SGE_FLAGS_ADDRESSING | \ | |
966 | MPT_TRANSFER_IOC_TO_HOST) | |
967 | #define MPT_SGE_FLAGS_SSIMPLE_WRITE \ | |
968 | (MPT_SGE_FLAGS_LAST_ELEMENT | \ | |
969 | MPT_SGE_FLAGS_END_OF_BUFFER | \ | |
970 | MPT_SGE_FLAGS_END_OF_LIST | \ | |
971 | MPT_SGE_FLAGS_SIMPLE_ELEMENT | \ | |
972 | MPT_SGE_FLAGS_ADDRESSING | \ | |
973 | MPT_TRANSFER_HOST_TO_IOC) | |
974 | ||
975 | /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
976 | #endif | |
977 |