Commit | Line | Data |
---|---|---|
bd985160 HV |
1 | /* cx25840 - Conexant CX25840 audio/video decoder driver |
2 | * | |
3 | * Copyright (C) 2004 Ulf Eklund | |
4 | * | |
5 | * Based on the saa7115 driver and on the first verison of Chris Kennedy's | |
6 | * cx25840 driver. | |
7 | * | |
8 | * Changes by Tyler Trafford <tatrafford@comcast.net> | |
9 | * - cleanup/rewrite for V4L2 API (2005) | |
10 | * | |
11 | * VBI support by Hans Verkuil <hverkuil@xs4all.nl>. | |
12 | * | |
3e3bf277 CN |
13 | * NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca> |
14 | * with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>. | |
15 | * | |
6d897616 | 16 | * CX23885 support by Steven Toth <stoth@linuxtv.org>. |
f234081b | 17 | * |
bd985160 HV |
18 | * This program is free software; you can redistribute it and/or |
19 | * modify it under the terms of the GNU General Public License | |
20 | * as published by the Free Software Foundation; either version 2 | |
21 | * of the License, or (at your option) any later version. | |
22 | * | |
23 | * This program is distributed in the hope that it will be useful, | |
24 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
25 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
26 | * GNU General Public License for more details. | |
27 | * | |
28 | * You should have received a copy of the GNU General Public License | |
29 | * along with this program; if not, write to the Free Software | |
30 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
31 | */ | |
32 | ||
33 | ||
34 | #include <linux/kernel.h> | |
35 | #include <linux/module.h> | |
36 | #include <linux/slab.h> | |
37 | #include <linux/videodev2.h> | |
38 | #include <linux/i2c.h> | |
f61b48f7 | 39 | #include <linux/delay.h> |
bd985160 | 40 | #include <media/v4l2-common.h> |
3434eb7e | 41 | #include <media/v4l2-chip-ident.h> |
b6198ade | 42 | #include <media/v4l2-i2c-drv.h> |
31bc09b5 | 43 | #include <media/cx25840.h> |
bd985160 | 44 | |
31bc09b5 | 45 | #include "cx25840-core.h" |
bd985160 HV |
46 | |
47 | MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver"); | |
1f4b3365 | 48 | MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford"); |
bd985160 HV |
49 | MODULE_LICENSE("GPL"); |
50 | ||
fe0d3dff | 51 | static int cx25840_debug; |
bd985160 | 52 | |
b5fc7144 | 53 | module_param_named(debug,cx25840_debug, int, 0644); |
bd985160 | 54 | |
fac9e899 | 55 | MODULE_PARM_DESC(debug, "Debugging messages [0=Off (default) 1=On]"); |
bd985160 | 56 | |
bd985160 HV |
57 | |
58 | /* ----------------------------------------------------------------------- */ | |
59 | ||
60 | int cx25840_write(struct i2c_client *client, u16 addr, u8 value) | |
61 | { | |
62 | u8 buffer[3]; | |
63 | buffer[0] = addr >> 8; | |
64 | buffer[1] = addr & 0xff; | |
65 | buffer[2] = value; | |
66 | return i2c_master_send(client, buffer, 3); | |
67 | } | |
68 | ||
69 | int cx25840_write4(struct i2c_client *client, u16 addr, u32 value) | |
70 | { | |
71 | u8 buffer[6]; | |
72 | buffer[0] = addr >> 8; | |
73 | buffer[1] = addr & 0xff; | |
4a56eb3f HV |
74 | buffer[2] = value & 0xff; |
75 | buffer[3] = (value >> 8) & 0xff; | |
76 | buffer[4] = (value >> 16) & 0xff; | |
77 | buffer[5] = value >> 24; | |
bd985160 HV |
78 | return i2c_master_send(client, buffer, 6); |
79 | } | |
80 | ||
81 | u8 cx25840_read(struct i2c_client * client, u16 addr) | |
82 | { | |
83 | u8 buffer[2]; | |
84 | buffer[0] = addr >> 8; | |
85 | buffer[1] = addr & 0xff; | |
86 | ||
87 | if (i2c_master_send(client, buffer, 2) < 2) | |
88 | return 0; | |
89 | ||
90 | if (i2c_master_recv(client, buffer, 1) < 1) | |
91 | return 0; | |
92 | ||
93 | return buffer[0]; | |
94 | } | |
95 | ||
96 | u32 cx25840_read4(struct i2c_client * client, u16 addr) | |
97 | { | |
98 | u8 buffer[4]; | |
99 | buffer[0] = addr >> 8; | |
100 | buffer[1] = addr & 0xff; | |
101 | ||
102 | if (i2c_master_send(client, buffer, 2) < 2) | |
103 | return 0; | |
104 | ||
105 | if (i2c_master_recv(client, buffer, 4) < 4) | |
106 | return 0; | |
107 | ||
17531c16 HV |
108 | return (buffer[3] << 24) | (buffer[2] << 16) | |
109 | (buffer[1] << 8) | buffer[0]; | |
bd985160 HV |
110 | } |
111 | ||
e2b8cf4c | 112 | int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, |
bd985160 HV |
113 | u8 or_value) |
114 | { | |
115 | return cx25840_write(client, addr, | |
116 | (cx25840_read(client, addr) & and_mask) | | |
117 | or_value); | |
118 | } | |
119 | ||
120 | /* ----------------------------------------------------------------------- */ | |
121 | ||
a8bbf12a HV |
122 | static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, |
123 | enum cx25840_audio_input aud_input); | |
bd985160 HV |
124 | |
125 | /* ----------------------------------------------------------------------- */ | |
126 | ||
d92c20e0 | 127 | static void init_dll1(struct i2c_client *client) |
bd985160 HV |
128 | { |
129 | /* This is the Hauppauge sequence used to | |
130 | * initialize the Delay Lock Loop 1 (ADC DLL). */ | |
131 | cx25840_write(client, 0x159, 0x23); | |
132 | cx25840_write(client, 0x15a, 0x87); | |
133 | cx25840_write(client, 0x15b, 0x06); | |
38051450 | 134 | udelay(10); |
bd985160 | 135 | cx25840_write(client, 0x159, 0xe1); |
38051450 | 136 | udelay(10); |
bd985160 HV |
137 | cx25840_write(client, 0x15a, 0x86); |
138 | cx25840_write(client, 0x159, 0xe0); | |
139 | cx25840_write(client, 0x159, 0xe1); | |
140 | cx25840_write(client, 0x15b, 0x10); | |
141 | } | |
142 | ||
d92c20e0 | 143 | static void init_dll2(struct i2c_client *client) |
bd985160 HV |
144 | { |
145 | /* This is the Hauppauge sequence used to | |
146 | * initialize the Delay Lock Loop 2 (ADC DLL). */ | |
147 | cx25840_write(client, 0x15d, 0xe3); | |
148 | cx25840_write(client, 0x15e, 0x86); | |
149 | cx25840_write(client, 0x15f, 0x06); | |
38051450 | 150 | udelay(10); |
bd985160 HV |
151 | cx25840_write(client, 0x15d, 0xe1); |
152 | cx25840_write(client, 0x15d, 0xe0); | |
153 | cx25840_write(client, 0x15d, 0xe1); | |
154 | } | |
155 | ||
e2b8cf4c HV |
156 | static void cx25836_initialize(struct i2c_client *client) |
157 | { | |
158 | /* reset configuration is described on page 3-77 of the CX25836 datasheet */ | |
159 | /* 2. */ | |
160 | cx25840_and_or(client, 0x000, ~0x01, 0x01); | |
161 | cx25840_and_or(client, 0x000, ~0x01, 0x00); | |
162 | /* 3a. */ | |
163 | cx25840_and_or(client, 0x15a, ~0x70, 0x00); | |
164 | /* 3b. */ | |
165 | cx25840_and_or(client, 0x15b, ~0x1e, 0x06); | |
166 | /* 3c. */ | |
167 | cx25840_and_or(client, 0x159, ~0x02, 0x02); | |
168 | /* 3d. */ | |
38051450 | 169 | udelay(10); |
e2b8cf4c HV |
170 | /* 3e. */ |
171 | cx25840_and_or(client, 0x159, ~0x02, 0x00); | |
172 | /* 3f. */ | |
173 | cx25840_and_or(client, 0x159, ~0xc0, 0xc0); | |
174 | /* 3g. */ | |
175 | cx25840_and_or(client, 0x159, ~0x01, 0x00); | |
176 | cx25840_and_or(client, 0x159, ~0x01, 0x01); | |
177 | /* 3h. */ | |
178 | cx25840_and_or(client, 0x15b, ~0x1e, 0x10); | |
179 | } | |
180 | ||
21340ae0 HV |
181 | static void cx25840_work_handler(struct work_struct *work) |
182 | { | |
183 | struct cx25840_state *state = container_of(work, struct cx25840_state, fw_work); | |
184 | cx25840_loadfw(state->c); | |
185 | wake_up(&state->fw_wait); | |
186 | } | |
187 | ||
89fc4eb9 | 188 | static void cx25840_initialize(struct i2c_client *client) |
bd985160 | 189 | { |
21340ae0 | 190 | DEFINE_WAIT(wait); |
9357b31c | 191 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
21340ae0 | 192 | struct workqueue_struct *q; |
bd985160 HV |
193 | |
194 | /* datasheet startup in numbered steps, refer to page 3-77 */ | |
195 | /* 2. */ | |
196 | cx25840_and_or(client, 0x803, ~0x10, 0x00); | |
197 | /* The default of this register should be 4, but I get 0 instead. | |
198 | * Set this register to 4 manually. */ | |
199 | cx25840_write(client, 0x000, 0x04); | |
200 | /* 3. */ | |
201 | init_dll1(client); | |
202 | init_dll2(client); | |
203 | cx25840_write(client, 0x136, 0x0a); | |
204 | /* 4. */ | |
205 | cx25840_write(client, 0x13c, 0x01); | |
206 | cx25840_write(client, 0x13c, 0x00); | |
207 | /* 5. */ | |
21340ae0 HV |
208 | /* Do the firmware load in a work handler to prevent. |
209 | Otherwise the kernel is blocked waiting for the | |
210 | bit-banging i2c interface to finish uploading the | |
211 | firmware. */ | |
212 | INIT_WORK(&state->fw_work, cx25840_work_handler); | |
213 | init_waitqueue_head(&state->fw_wait); | |
214 | q = create_singlethread_workqueue("cx25840_fw"); | |
215 | prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); | |
216 | queue_work(q, &state->fw_work); | |
217 | schedule(); | |
218 | finish_wait(&state->fw_wait, &wait); | |
219 | destroy_workqueue(q); | |
220 | ||
bd985160 HV |
221 | /* 6. */ |
222 | cx25840_write(client, 0x115, 0x8c); | |
223 | cx25840_write(client, 0x116, 0x07); | |
224 | cx25840_write(client, 0x118, 0x02); | |
225 | /* 7. */ | |
226 | cx25840_write(client, 0x4a5, 0x80); | |
227 | cx25840_write(client, 0x4a5, 0x00); | |
228 | cx25840_write(client, 0x402, 0x00); | |
229 | /* 8. */ | |
73dcddc5 HV |
230 | cx25840_and_or(client, 0x401, ~0x18, 0); |
231 | cx25840_and_or(client, 0x4a2, ~0x10, 0x10); | |
232 | /* steps 8c and 8d are done in change_input() */ | |
bd985160 HV |
233 | /* 10. */ |
234 | cx25840_write(client, 0x8d3, 0x1f); | |
235 | cx25840_write(client, 0x8e3, 0x03); | |
236 | ||
cb5aa1c6 | 237 | cx25840_std_setup(client); |
bd985160 HV |
238 | |
239 | /* trial and error says these are needed to get audio */ | |
240 | cx25840_write(client, 0x914, 0xa0); | |
241 | cx25840_write(client, 0x918, 0xa0); | |
242 | cx25840_write(client, 0x919, 0x01); | |
243 | ||
244 | /* stereo prefered */ | |
245 | cx25840_write(client, 0x809, 0x04); | |
246 | /* AC97 shift */ | |
247 | cx25840_write(client, 0x8cf, 0x0f); | |
248 | ||
a8bbf12a HV |
249 | /* (re)set input */ |
250 | set_input(client, state->vid_input, state->aud_input); | |
bd985160 HV |
251 | |
252 | /* start microcontroller */ | |
253 | cx25840_and_or(client, 0x803, ~0x10, 0x10); | |
254 | } | |
255 | ||
f234081b ST |
256 | static void cx23885_initialize(struct i2c_client *client) |
257 | { | |
258 | DEFINE_WAIT(wait); | |
9357b31c | 259 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
f234081b ST |
260 | struct workqueue_struct *q; |
261 | ||
e283d780 AW |
262 | /* |
263 | * Come out of digital power down | |
264 | * The CX23888, at least, needs this, otherwise registers aside from | |
265 | * 0x0-0x2 can't be read or written. | |
266 | */ | |
267 | cx25840_write(client, 0x000, 0); | |
268 | ||
f234081b ST |
269 | /* Internal Reset */ |
270 | cx25840_and_or(client, 0x102, ~0x01, 0x01); | |
271 | cx25840_and_or(client, 0x102, ~0x01, 0x00); | |
272 | ||
273 | /* Stop microcontroller */ | |
274 | cx25840_and_or(client, 0x803, ~0x10, 0x00); | |
275 | ||
276 | /* DIF in reset? */ | |
277 | cx25840_write(client, 0x398, 0); | |
278 | ||
e283d780 AW |
279 | /* |
280 | * Trust the default xtal, no division | |
281 | * '885: 28.636363... MHz | |
282 | * '887: 25.000000 MHz | |
283 | * '888: 50.000000 MHz | |
284 | */ | |
f234081b ST |
285 | cx25840_write(client, 0x2, 0x76); |
286 | ||
e283d780 | 287 | /* Power up all the PLL's and DLL */ |
f234081b ST |
288 | cx25840_write(client, 0x1, 0x40); |
289 | ||
e283d780 AW |
290 | /* Sys PLL */ |
291 | switch (state->id) { | |
292 | case V4L2_IDENT_CX23888_AV: | |
293 | /* | |
294 | * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz | |
295 | * 572.73 MHz before post divide | |
296 | */ | |
297 | cx25840_write4(client, 0x11c, 0x00e8ba26); | |
298 | cx25840_write4(client, 0x118, 0x0000040b); | |
299 | break; | |
300 | case V4L2_IDENT_CX23887_AV: | |
301 | /* | |
302 | * 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz | |
303 | * 572.73 MHz before post divide | |
304 | */ | |
305 | cx25840_write4(client, 0x11c, 0x01d1744c); | |
306 | cx25840_write4(client, 0x118, 0x00000416); | |
307 | break; | |
308 | case V4L2_IDENT_CX23885_AV: | |
309 | default: | |
310 | /* | |
311 | * 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz | |
312 | * 572.73 MHz before post divide | |
313 | */ | |
314 | cx25840_write4(client, 0x11c, 0x00000000); | |
315 | cx25840_write4(client, 0x118, 0x00000414); | |
316 | break; | |
317 | } | |
f234081b ST |
318 | |
319 | /* Disable DIF bypass */ | |
320 | cx25840_write4(client, 0x33c, 0x00000001); | |
321 | ||
322 | /* DIF Src phase inc */ | |
323 | cx25840_write4(client, 0x340, 0x0df7df83); | |
324 | ||
e283d780 AW |
325 | /* |
326 | * Vid PLL | |
327 | * Setup for a BT.656 pixel clock of 13.5 Mpixels/second | |
328 | * | |
329 | * 28.636363 MHz * (0xf + 0x02be2c9/0x2000000)/4 = 8 * 13.5 MHz | |
330 | * 432.0 MHz before post divide | |
331 | */ | |
332 | cx25840_write4(client, 0x10c, 0x002be2c9); | |
333 | cx25840_write4(client, 0x108, 0x0000040f); | |
f234081b ST |
334 | |
335 | /* Luma */ | |
336 | cx25840_write4(client, 0x414, 0x00107d12); | |
337 | ||
338 | /* Chroma */ | |
339 | cx25840_write4(client, 0x420, 0x3d008282); | |
340 | ||
e283d780 AW |
341 | /* |
342 | * Aux PLL | |
343 | * Initial setup for audio sample clock: | |
344 | * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz | |
345 | * Intial I2S output/master clock(?): | |
346 | * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz | |
347 | */ | |
348 | switch (state->id) { | |
349 | case V4L2_IDENT_CX23888_AV: | |
350 | /* | |
351 | * 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz | |
352 | * 368.64 MHz before post divide | |
353 | * 122.88 MHz / 0xa = 12.288 MHz | |
354 | */ | |
355 | cx25840_write4(client, 0x114, 0x00bedfa4); | |
356 | cx25840_write4(client, 0x110, 0x000a0307); | |
357 | break; | |
358 | case V4L2_IDENT_CX23887_AV: | |
359 | /* | |
360 | * 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz | |
361 | * 368.64 MHz before post divide | |
362 | * 122.88 MHz / 0xa = 12.288 MHz | |
363 | */ | |
364 | cx25840_write4(client, 0x114, 0x017dbf48); | |
365 | cx25840_write4(client, 0x110, 0x000a030e); | |
366 | break; | |
367 | case V4L2_IDENT_CX23885_AV: | |
368 | default: | |
369 | /* | |
370 | * 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz | |
371 | * 368.64 MHz before post divide | |
372 | * 122.88 MHz / 0xa = 12.288 MHz | |
373 | */ | |
374 | cx25840_write4(client, 0x114, 0x01bf0c9e); | |
375 | cx25840_write4(client, 0x110, 0x000a030c); | |
376 | break; | |
377 | }; | |
f234081b ST |
378 | |
379 | /* ADC2 input select */ | |
380 | cx25840_write(client, 0x102, 0x10); | |
381 | ||
382 | /* VIN1 & VIN5 */ | |
383 | cx25840_write(client, 0x103, 0x11); | |
384 | ||
385 | /* Enable format auto detect */ | |
386 | cx25840_write(client, 0x400, 0); | |
387 | /* Fast subchroma lock */ | |
388 | /* White crush, Chroma AGC & Chroma Killer enabled */ | |
389 | cx25840_write(client, 0x401, 0xe8); | |
390 | ||
391 | /* Select AFE clock pad output source */ | |
392 | cx25840_write(client, 0x144, 0x05); | |
393 | ||
f3d6f633 ST |
394 | /* Drive GPIO2 direction and values for HVR1700 |
395 | * where an onboard mux selects the output of demodulator | |
396 | * vs the 417. Failure to set this results in no DTV. | |
397 | * It's safe to set this across all Hauppauge boards | |
398 | * currently, regardless of the board type. | |
399 | */ | |
400 | cx25840_write(client, 0x160, 0x1d); | |
401 | cx25840_write(client, 0x164, 0x00); | |
402 | ||
f234081b ST |
403 | /* Do the firmware load in a work handler to prevent. |
404 | Otherwise the kernel is blocked waiting for the | |
405 | bit-banging i2c interface to finish uploading the | |
406 | firmware. */ | |
407 | INIT_WORK(&state->fw_work, cx25840_work_handler); | |
408 | init_waitqueue_head(&state->fw_wait); | |
409 | q = create_singlethread_workqueue("cx25840_fw"); | |
410 | prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); | |
411 | queue_work(q, &state->fw_work); | |
412 | schedule(); | |
413 | finish_wait(&state->fw_wait, &wait); | |
414 | destroy_workqueue(q); | |
415 | ||
cb5aa1c6 | 416 | cx25840_std_setup(client); |
f234081b ST |
417 | |
418 | /* (re)set input */ | |
419 | set_input(client, state->vid_input, state->aud_input); | |
420 | ||
421 | /* start microcontroller */ | |
422 | cx25840_and_or(client, 0x803, ~0x10, 0x10); | |
423 | } | |
424 | ||
bd985160 HV |
425 | /* ----------------------------------------------------------------------- */ |
426 | ||
149783b5 SD |
427 | static void cx231xx_initialize(struct i2c_client *client) |
428 | { | |
429 | DEFINE_WAIT(wait); | |
430 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); | |
431 | struct workqueue_struct *q; | |
432 | ||
433 | /* Internal Reset */ | |
434 | cx25840_and_or(client, 0x102, ~0x01, 0x01); | |
435 | cx25840_and_or(client, 0x102, ~0x01, 0x00); | |
436 | ||
437 | /* Stop microcontroller */ | |
438 | cx25840_and_or(client, 0x803, ~0x10, 0x00); | |
439 | ||
440 | /* DIF in reset? */ | |
441 | cx25840_write(client, 0x398, 0); | |
442 | ||
443 | /* Trust the default xtal, no division */ | |
444 | /* This changes for the cx23888 products */ | |
445 | cx25840_write(client, 0x2, 0x76); | |
446 | ||
447 | /* Bring down the regulator for AUX clk */ | |
448 | cx25840_write(client, 0x1, 0x40); | |
449 | ||
450 | /* Disable DIF bypass */ | |
451 | cx25840_write4(client, 0x33c, 0x00000001); | |
452 | ||
453 | /* DIF Src phase inc */ | |
454 | cx25840_write4(client, 0x340, 0x0df7df83); | |
455 | ||
149783b5 SD |
456 | /* Luma */ |
457 | cx25840_write4(client, 0x414, 0x00107d12); | |
458 | ||
459 | /* Chroma */ | |
460 | cx25840_write4(client, 0x420, 0x3d008282); | |
461 | ||
149783b5 SD |
462 | /* ADC2 input select */ |
463 | cx25840_write(client, 0x102, 0x10); | |
464 | ||
465 | /* VIN1 & VIN5 */ | |
466 | cx25840_write(client, 0x103, 0x11); | |
467 | ||
468 | /* Enable format auto detect */ | |
469 | cx25840_write(client, 0x400, 0); | |
470 | /* Fast subchroma lock */ | |
471 | /* White crush, Chroma AGC & Chroma Killer enabled */ | |
472 | cx25840_write(client, 0x401, 0xe8); | |
473 | ||
149783b5 SD |
474 | /* Do the firmware load in a work handler to prevent. |
475 | Otherwise the kernel is blocked waiting for the | |
476 | bit-banging i2c interface to finish uploading the | |
477 | firmware. */ | |
478 | INIT_WORK(&state->fw_work, cx25840_work_handler); | |
479 | init_waitqueue_head(&state->fw_wait); | |
480 | q = create_singlethread_workqueue("cx25840_fw"); | |
481 | prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); | |
482 | queue_work(q, &state->fw_work); | |
483 | schedule(); | |
484 | finish_wait(&state->fw_wait, &wait); | |
485 | destroy_workqueue(q); | |
486 | ||
487 | cx25840_std_setup(client); | |
488 | ||
489 | /* (re)set input */ | |
490 | set_input(client, state->vid_input, state->aud_input); | |
491 | ||
492 | /* start microcontroller */ | |
493 | cx25840_and_or(client, 0x803, ~0x10, 0x10); | |
494 | } | |
495 | ||
496 | /* ----------------------------------------------------------------------- */ | |
497 | ||
cb5aa1c6 HV |
498 | void cx25840_std_setup(struct i2c_client *client) |
499 | { | |
9357b31c | 500 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
cb5aa1c6 HV |
501 | v4l2_std_id std = state->std; |
502 | int hblank, hactive, burst, vblank, vactive, sc; | |
503 | int vblank656, src_decimation; | |
504 | int luma_lpf, uv_lpf, comb; | |
505 | u32 pll_int, pll_frac, pll_post; | |
506 | ||
507 | /* datasheet startup, step 8d */ | |
508 | if (std & ~V4L2_STD_NTSC) | |
509 | cx25840_write(client, 0x49f, 0x11); | |
510 | else | |
511 | cx25840_write(client, 0x49f, 0x14); | |
512 | ||
513 | if (std & V4L2_STD_625_50) { | |
514 | hblank = 132; | |
515 | hactive = 720; | |
516 | burst = 93; | |
517 | vblank = 36; | |
518 | vactive = 580; | |
519 | vblank656 = 40; | |
520 | src_decimation = 0x21f; | |
521 | luma_lpf = 2; | |
522 | ||
523 | if (std & V4L2_STD_SECAM) { | |
524 | uv_lpf = 0; | |
525 | comb = 0; | |
526 | sc = 0x0a425f; | |
527 | } else if (std == V4L2_STD_PAL_Nc) { | |
528 | uv_lpf = 1; | |
529 | comb = 0x20; | |
530 | sc = 556453; | |
531 | } else { | |
532 | uv_lpf = 1; | |
533 | comb = 0x20; | |
534 | sc = 688739; | |
535 | } | |
536 | } else { | |
537 | hactive = 720; | |
538 | hblank = 122; | |
539 | vactive = 487; | |
540 | luma_lpf = 1; | |
541 | uv_lpf = 1; | |
542 | ||
543 | src_decimation = 0x21f; | |
544 | if (std == V4L2_STD_PAL_60) { | |
545 | vblank = 26; | |
546 | vblank656 = 26; | |
547 | burst = 0x5b; | |
548 | luma_lpf = 2; | |
549 | comb = 0x20; | |
550 | sc = 688739; | |
551 | } else if (std == V4L2_STD_PAL_M) { | |
552 | vblank = 20; | |
553 | vblank656 = 24; | |
554 | burst = 0x61; | |
555 | comb = 0x20; | |
556 | sc = 555452; | |
557 | } else { | |
558 | vblank = 26; | |
559 | vblank656 = 26; | |
560 | burst = 0x5b; | |
561 | comb = 0x66; | |
562 | sc = 556063; | |
563 | } | |
564 | } | |
565 | ||
566 | /* DEBUG: Displays configured PLL frequency */ | |
2a03f034 | 567 | if (!is_cx231xx(state)) { |
95b14fb2 MCC |
568 | pll_int = cx25840_read(client, 0x108); |
569 | pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff; | |
570 | pll_post = cx25840_read(client, 0x109); | |
cb5aa1c6 | 571 | v4l_dbg(1, cx25840_debug, client, |
95b14fb2 MCC |
572 | "PLL regs = int: %u, frac: %u, post: %u\n", |
573 | pll_int, pll_frac, pll_post); | |
574 | ||
575 | if (pll_post) { | |
576 | int fin, fsc; | |
577 | int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L; | |
578 | ||
579 | pll /= pll_post; | |
580 | v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n", | |
581 | pll / 1000000, pll % 1000000); | |
582 | v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n", | |
583 | pll / 8000000, (pll / 8) % 1000000); | |
584 | ||
585 | fin = ((u64)src_decimation * pll) >> 12; | |
586 | v4l_dbg(1, cx25840_debug, client, | |
587 | "ADC Sampling freq = %d.%06d MHz\n", | |
588 | fin / 1000000, fin % 1000000); | |
589 | ||
590 | fsc = (((u64)sc) * pll) >> 24L; | |
591 | v4l_dbg(1, cx25840_debug, client, | |
592 | "Chroma sub-carrier freq = %d.%06d MHz\n", | |
593 | fsc / 1000000, fsc % 1000000); | |
594 | ||
595 | v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, " | |
596 | "vblank %i, vactive %i, vblank656 %i, src_dec %i, " | |
597 | "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, " | |
598 | "sc 0x%06x\n", | |
599 | hblank, hactive, vblank, vactive, vblank656, | |
600 | src_decimation, burst, luma_lpf, uv_lpf, comb, sc); | |
601 | } | |
cb5aa1c6 HV |
602 | } |
603 | ||
604 | /* Sets horizontal blanking delay and active lines */ | |
605 | cx25840_write(client, 0x470, hblank); | |
606 | cx25840_write(client, 0x471, | |
607 | 0xff & (((hblank >> 8) & 0x3) | (hactive << 4))); | |
608 | cx25840_write(client, 0x472, hactive >> 4); | |
609 | ||
610 | /* Sets burst gate delay */ | |
611 | cx25840_write(client, 0x473, burst); | |
612 | ||
613 | /* Sets vertical blanking delay and active duration */ | |
614 | cx25840_write(client, 0x474, vblank); | |
615 | cx25840_write(client, 0x475, | |
616 | 0xff & (((vblank >> 8) & 0x3) | (vactive << 4))); | |
617 | cx25840_write(client, 0x476, vactive >> 4); | |
618 | cx25840_write(client, 0x477, vblank656); | |
619 | ||
620 | /* Sets src decimation rate */ | |
621 | cx25840_write(client, 0x478, 0xff & src_decimation); | |
622 | cx25840_write(client, 0x479, 0xff & (src_decimation >> 8)); | |
623 | ||
624 | /* Sets Luma and UV Low pass filters */ | |
625 | cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); | |
626 | ||
627 | /* Enables comb filters */ | |
628 | cx25840_write(client, 0x47b, comb); | |
629 | ||
630 | /* Sets SC Step*/ | |
631 | cx25840_write(client, 0x47c, sc); | |
632 | cx25840_write(client, 0x47d, 0xff & sc >> 8); | |
633 | cx25840_write(client, 0x47e, 0xff & sc >> 16); | |
634 | ||
635 | /* Sets VBI parameters */ | |
636 | if (std & V4L2_STD_625_50) { | |
637 | cx25840_write(client, 0x47f, 0x01); | |
638 | state->vbi_line_offset = 5; | |
639 | } else { | |
640 | cx25840_write(client, 0x47f, 0x00); | |
641 | state->vbi_line_offset = 8; | |
642 | } | |
643 | } | |
644 | ||
645 | /* ----------------------------------------------------------------------- */ | |
646 | ||
bd985160 HV |
647 | static void input_change(struct i2c_client *client) |
648 | { | |
9357b31c | 649 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
081b496a | 650 | v4l2_std_id std = state->std; |
bd985160 | 651 | |
73dcddc5 HV |
652 | /* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */ |
653 | if (std & V4L2_STD_SECAM) { | |
654 | cx25840_write(client, 0x402, 0); | |
655 | } | |
656 | else { | |
657 | cx25840_write(client, 0x402, 0x04); | |
658 | cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); | |
659 | } | |
660 | cx25840_and_or(client, 0x401, ~0x60, 0); | |
661 | cx25840_and_or(client, 0x401, ~0x60, 0x60); | |
82677618 | 662 | cx25840_and_or(client, 0x810, ~0x01, 1); |
73dcddc5 | 663 | |
39c4ad6a HV |
664 | if (state->radio) { |
665 | cx25840_write(client, 0x808, 0xf9); | |
666 | cx25840_write(client, 0x80b, 0x00); | |
667 | } | |
668 | else if (std & V4L2_STD_525_60) { | |
d97a11e0 HV |
669 | /* Certain Hauppauge PVR150 models have a hardware bug |
670 | that causes audio to drop out. For these models the | |
671 | audio standard must be set explicitly. | |
672 | To be precise: it affects cards with tuner models | |
673 | 85, 99 and 112 (model numbers from tveeprom). */ | |
674 | int hw_fix = state->pvr150_workaround; | |
675 | ||
676 | if (std == V4L2_STD_NTSC_M_JP) { | |
f95006f8 | 677 | /* Japan uses EIAJ audio standard */ |
d97a11e0 HV |
678 | cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7); |
679 | } else if (std == V4L2_STD_NTSC_M_KR) { | |
680 | /* South Korea uses A2 audio standard */ | |
681 | cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8); | |
f95006f8 HV |
682 | } else { |
683 | /* Others use the BTSC audio standard */ | |
d97a11e0 | 684 | cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6); |
f95006f8 | 685 | } |
bd985160 | 686 | cx25840_write(client, 0x80b, 0x00); |
839e4a4a | 687 | } else if (std & V4L2_STD_PAL) { |
3c3099d5 | 688 | /* Autodetect audio standard and audio system */ |
839e4a4a | 689 | cx25840_write(client, 0x808, 0xff); |
3c3099d5 AP |
690 | /* Since system PAL-L is pretty much non-existant and |
691 | not used by any public broadcast network, force | |
692 | 6.5 MHz carrier to be interpreted as System DK, | |
693 | this avoids DK audio detection instability */ | |
694 | cx25840_write(client, 0x80b, 0x00); | |
839e4a4a | 695 | } else if (std & V4L2_STD_SECAM) { |
3c3099d5 | 696 | /* Autodetect audio standard and audio system */ |
839e4a4a | 697 | cx25840_write(client, 0x808, 0xff); |
3c3099d5 AP |
698 | /* If only one of SECAM-DK / SECAM-L is required, then force |
699 | 6.5MHz carrier, else autodetect it */ | |
700 | if ((std & V4L2_STD_SECAM_DK) && | |
701 | !(std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { | |
702 | /* 6.5 MHz carrier to be interpreted as System DK */ | |
703 | cx25840_write(client, 0x80b, 0x00); | |
704 | } else if (!(std & V4L2_STD_SECAM_DK) && | |
705 | (std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) { | |
706 | /* 6.5 MHz carrier to be interpreted as System L */ | |
707 | cx25840_write(client, 0x80b, 0x08); | |
708 | } else { | |
709 | /* 6.5 MHz carrier to be autodetected */ | |
710 | cx25840_write(client, 0x80b, 0x10); | |
711 | } | |
bd985160 HV |
712 | } |
713 | ||
82677618 | 714 | cx25840_and_or(client, 0x810, ~0x01, 0); |
bd985160 HV |
715 | } |
716 | ||
a8bbf12a HV |
717 | static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input, |
718 | enum cx25840_audio_input aud_input) | |
bd985160 | 719 | { |
9357b31c | 720 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
a8bbf12a HV |
721 | u8 is_composite = (vid_input >= CX25840_COMPOSITE1 && |
722 | vid_input <= CX25840_COMPOSITE8); | |
fb29ab96 DW |
723 | u8 is_component = (vid_input & CX25840_COMPONENT_ON) == |
724 | CX25840_COMPONENT_ON; | |
725 | int luma = vid_input & 0xf0; | |
726 | int chroma = vid_input & 0xf00; | |
a8bbf12a | 727 | u8 reg; |
bd985160 | 728 | |
f234081b ST |
729 | v4l_dbg(1, cx25840_debug, client, |
730 | "decoder set video input %d, audio input %d\n", | |
731 | vid_input, aud_input); | |
bd985160 | 732 | |
f234081b ST |
733 | if (vid_input >= CX25840_VIN1_CH1) { |
734 | v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n", | |
735 | vid_input); | |
736 | reg = vid_input & 0xff; | |
737 | if ((vid_input & CX25840_SVIDEO_ON) == CX25840_SVIDEO_ON) | |
738 | is_composite = 0; | |
fb29ab96 | 739 | else if ((vid_input & CX25840_COMPONENT_ON) == 0) |
f234081b ST |
740 | is_composite = 1; |
741 | ||
742 | v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n", | |
743 | reg, is_composite); | |
fb29ab96 | 744 | } else if (is_composite) { |
a8bbf12a HV |
745 | reg = 0xf0 + (vid_input - CX25840_COMPOSITE1); |
746 | } else { | |
a8bbf12a | 747 | if ((vid_input & ~0xff0) || |
45270a15 | 748 | luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || |
a8bbf12a | 749 | chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { |
f234081b ST |
750 | v4l_err(client, "0x%04x is not a valid video input!\n", |
751 | vid_input); | |
a8bbf12a | 752 | return -EINVAL; |
bd985160 | 753 | } |
a8bbf12a HV |
754 | reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4); |
755 | if (chroma >= CX25840_SVIDEO_CHROMA7) { | |
756 | reg &= 0x3f; | |
757 | reg |= (chroma - CX25840_SVIDEO_CHROMA7) >> 2; | |
bd985160 | 758 | } else { |
a8bbf12a HV |
759 | reg &= 0xcf; |
760 | reg |= (chroma - CX25840_SVIDEO_CHROMA4) >> 4; | |
bd985160 | 761 | } |
a8bbf12a | 762 | } |
bd985160 | 763 | |
f234081b ST |
764 | /* The caller has previously prepared the correct routing |
765 | * configuration in reg (for the cx23885) so we have no | |
766 | * need to attempt to flip bits for earlier av decoders. | |
767 | */ | |
2a03f034 | 768 | if (!is_cx2388x(state) && !is_cx231xx(state)) { |
f234081b ST |
769 | switch (aud_input) { |
770 | case CX25840_AUDIO_SERIAL: | |
771 | /* do nothing, use serial audio input */ | |
772 | break; | |
773 | case CX25840_AUDIO4: reg &= ~0x30; break; | |
774 | case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; | |
775 | case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; | |
776 | case CX25840_AUDIO7: reg &= ~0xc0; break; | |
777 | case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; | |
bd985160 | 778 | |
f234081b ST |
779 | default: |
780 | v4l_err(client, "0x%04x is not a valid audio input!\n", | |
781 | aud_input); | |
782 | return -EINVAL; | |
783 | } | |
bd985160 HV |
784 | } |
785 | ||
a8bbf12a | 786 | cx25840_write(client, 0x103, reg); |
f234081b | 787 | |
fb29ab96 DW |
788 | /* Set INPUT_MODE to Composite, S-Video or Component */ |
789 | if (is_component) | |
790 | cx25840_and_or(client, 0x401, ~0x6, 0x6); | |
791 | else | |
792 | cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02); | |
f234081b | 793 | |
2a03f034 | 794 | if (!is_cx2388x(state) && !is_cx231xx(state)) { |
f234081b ST |
795 | /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ |
796 | cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); | |
797 | /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */ | |
798 | if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) | |
799 | cx25840_and_or(client, 0x102, ~0x4, 4); | |
800 | else | |
801 | cx25840_and_or(client, 0x102, ~0x4, 0); | |
802 | } else { | |
fb29ab96 DW |
803 | /* Set DUAL_MODE_ADC2 to 1 if component*/ |
804 | cx25840_and_or(client, 0x102, ~0x4, is_component ? 0x4 : 0x0); | |
805 | if (is_composite) { | |
f234081b ST |
806 | /* ADC2 input select channel 2 */ |
807 | cx25840_and_or(client, 0x102, ~0x2, 0); | |
fb29ab96 DW |
808 | } else if (!is_component) { |
809 | /* S-Video */ | |
810 | if (chroma >= CX25840_SVIDEO_CHROMA7) { | |
811 | /* ADC2 input select channel 3 */ | |
812 | cx25840_and_or(client, 0x102, ~0x2, 2); | |
813 | } else { | |
814 | /* ADC2 input select channel 2 */ | |
815 | cx25840_and_or(client, 0x102, ~0x2, 0); | |
816 | } | |
817 | } | |
f234081b | 818 | } |
a8bbf12a HV |
819 | |
820 | state->vid_input = vid_input; | |
821 | state->aud_input = aud_input; | |
2a03f034 | 822 | if (!is_cx2583x(state)) { |
e2b8cf4c HV |
823 | cx25840_audio_set_path(client); |
824 | input_change(client); | |
825 | } | |
f234081b | 826 | |
2a03f034 | 827 | if (is_cx2388x(state)) { |
f234081b ST |
828 | /* Audio channel 1 src : Parallel 1 */ |
829 | cx25840_write(client, 0x124, 0x03); | |
830 | ||
831 | /* Select AFE clock pad output source */ | |
832 | cx25840_write(client, 0x144, 0x05); | |
833 | ||
834 | /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ | |
835 | cx25840_write(client, 0x914, 0xa0); | |
836 | ||
149783b5 SD |
837 | /* I2S_OUT_CTL: |
838 | * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 | |
839 | * I2S_OUT_MASTER_MODE = Master | |
840 | */ | |
841 | cx25840_write(client, 0x918, 0xa0); | |
842 | cx25840_write(client, 0x919, 0x01); | |
2a03f034 | 843 | } else if (is_cx231xx(state)) { |
149783b5 SD |
844 | /* Audio channel 1 src : Parallel 1 */ |
845 | cx25840_write(client, 0x124, 0x03); | |
846 | ||
847 | /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ | |
848 | cx25840_write(client, 0x914, 0xa0); | |
849 | ||
f234081b ST |
850 | /* I2S_OUT_CTL: |
851 | * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 | |
852 | * I2S_OUT_MASTER_MODE = Master | |
853 | */ | |
854 | cx25840_write(client, 0x918, 0xa0); | |
855 | cx25840_write(client, 0x919, 0x01); | |
856 | } | |
857 | ||
bd985160 HV |
858 | return 0; |
859 | } | |
860 | ||
861 | /* ----------------------------------------------------------------------- */ | |
862 | ||
081b496a | 863 | static int set_v4lstd(struct i2c_client *client) |
bd985160 | 864 | { |
9357b31c | 865 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
081b496a HV |
866 | u8 fmt = 0; /* zero is autodetect */ |
867 | u8 pal_m = 0; | |
468a0a54 MCC |
868 | |
869 | /* First tests should be against specific std */ | |
081b496a HV |
870 | if (state->std == V4L2_STD_NTSC_M_JP) { |
871 | fmt = 0x2; | |
872 | } else if (state->std == V4L2_STD_NTSC_443) { | |
873 | fmt = 0x3; | |
874 | } else if (state->std == V4L2_STD_PAL_M) { | |
875 | pal_m = 1; | |
876 | fmt = 0x5; | |
877 | } else if (state->std == V4L2_STD_PAL_N) { | |
878 | fmt = 0x6; | |
879 | } else if (state->std == V4L2_STD_PAL_Nc) { | |
880 | fmt = 0x7; | |
881 | } else if (state->std == V4L2_STD_PAL_60) { | |
882 | fmt = 0x8; | |
468a0a54 MCC |
883 | } else { |
884 | /* Then, test against generic ones */ | |
081b496a HV |
885 | if (state->std & V4L2_STD_NTSC) |
886 | fmt = 0x1; | |
887 | else if (state->std & V4L2_STD_PAL) | |
888 | fmt = 0x4; | |
889 | else if (state->std & V4L2_STD_SECAM) | |
890 | fmt = 0xc; | |
bd985160 HV |
891 | } |
892 | ||
839e4a4a MCC |
893 | v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt); |
894 | ||
73dcddc5 HV |
895 | /* Follow step 9 of section 3.16 in the cx25840 datasheet. |
896 | Without this PAL may display a vertical ghosting effect. | |
897 | This happens for example with the Yuan MPC622. */ | |
898 | if (fmt >= 4 && fmt < 8) { | |
899 | /* Set format to NTSC-M */ | |
900 | cx25840_and_or(client, 0x400, ~0xf, 1); | |
901 | /* Turn off LCOMB */ | |
902 | cx25840_and_or(client, 0x47b, ~6, 0); | |
903 | } | |
bd985160 | 904 | cx25840_and_or(client, 0x400, ~0xf, fmt); |
081b496a | 905 | cx25840_and_or(client, 0x403, ~0x3, pal_m); |
cb5aa1c6 | 906 | cx25840_std_setup(client); |
2a03f034 | 907 | if (!is_cx2583x(state)) |
081b496a | 908 | input_change(client); |
bd985160 HV |
909 | return 0; |
910 | } | |
911 | ||
bd985160 HV |
912 | /* ----------------------------------------------------------------------- */ |
913 | ||
9357b31c | 914 | static int cx25840_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
bd985160 | 915 | { |
95b14fb2 | 916 | struct cx25840_state *state = to_state(sd); |
9357b31c | 917 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
bd985160 HV |
918 | |
919 | switch (ctrl->id) { | |
a8bbf12a HV |
920 | case CX25840_CID_ENABLE_PVR150_WORKAROUND: |
921 | state->pvr150_workaround = ctrl->value; | |
922 | set_input(client, state->vid_input, state->aud_input); | |
bd985160 HV |
923 | break; |
924 | ||
925 | case V4L2_CID_BRIGHTNESS: | |
926 | if (ctrl->value < 0 || ctrl->value > 255) { | |
fac9e899 | 927 | v4l_err(client, "invalid brightness setting %d\n", |
bd985160 HV |
928 | ctrl->value); |
929 | return -ERANGE; | |
930 | } | |
931 | ||
932 | cx25840_write(client, 0x414, ctrl->value - 128); | |
933 | break; | |
934 | ||
935 | case V4L2_CID_CONTRAST: | |
936 | if (ctrl->value < 0 || ctrl->value > 127) { | |
fac9e899 | 937 | v4l_err(client, "invalid contrast setting %d\n", |
bd985160 HV |
938 | ctrl->value); |
939 | return -ERANGE; | |
940 | } | |
941 | ||
942 | cx25840_write(client, 0x415, ctrl->value << 1); | |
943 | break; | |
944 | ||
945 | case V4L2_CID_SATURATION: | |
946 | if (ctrl->value < 0 || ctrl->value > 127) { | |
fac9e899 | 947 | v4l_err(client, "invalid saturation setting %d\n", |
bd985160 HV |
948 | ctrl->value); |
949 | return -ERANGE; | |
950 | } | |
951 | ||
952 | cx25840_write(client, 0x420, ctrl->value << 1); | |
953 | cx25840_write(client, 0x421, ctrl->value << 1); | |
954 | break; | |
955 | ||
956 | case V4L2_CID_HUE: | |
de6476f5 | 957 | if (ctrl->value < -128 || ctrl->value > 127) { |
fac9e899 | 958 | v4l_err(client, "invalid hue setting %d\n", ctrl->value); |
bd985160 HV |
959 | return -ERANGE; |
960 | } | |
961 | ||
962 | cx25840_write(client, 0x422, ctrl->value); | |
963 | break; | |
964 | ||
965 | case V4L2_CID_AUDIO_VOLUME: | |
966 | case V4L2_CID_AUDIO_BASS: | |
967 | case V4L2_CID_AUDIO_TREBLE: | |
968 | case V4L2_CID_AUDIO_BALANCE: | |
969 | case V4L2_CID_AUDIO_MUTE: | |
2a03f034 | 970 | if (is_cx2583x(state)) |
e2b8cf4c | 971 | return -EINVAL; |
df1d5ed8 | 972 | return cx25840_audio_s_ctrl(sd, ctrl); |
3faeeae4 HV |
973 | |
974 | default: | |
975 | return -EINVAL; | |
bd985160 HV |
976 | } |
977 | ||
978 | return 0; | |
979 | } | |
980 | ||
9357b31c | 981 | static int cx25840_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
bd985160 | 982 | { |
95b14fb2 | 983 | struct cx25840_state *state = to_state(sd); |
9357b31c | 984 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
bd985160 HV |
985 | |
986 | switch (ctrl->id) { | |
a8bbf12a HV |
987 | case CX25840_CID_ENABLE_PVR150_WORKAROUND: |
988 | ctrl->value = state->pvr150_workaround; | |
bd985160 HV |
989 | break; |
990 | case V4L2_CID_BRIGHTNESS: | |
0de71224 | 991 | ctrl->value = (s8)cx25840_read(client, 0x414) + 128; |
bd985160 HV |
992 | break; |
993 | case V4L2_CID_CONTRAST: | |
994 | ctrl->value = cx25840_read(client, 0x415) >> 1; | |
995 | break; | |
996 | case V4L2_CID_SATURATION: | |
997 | ctrl->value = cx25840_read(client, 0x420) >> 1; | |
998 | break; | |
999 | case V4L2_CID_HUE: | |
c5099a64 | 1000 | ctrl->value = (s8)cx25840_read(client, 0x422); |
bd985160 HV |
1001 | break; |
1002 | case V4L2_CID_AUDIO_VOLUME: | |
1003 | case V4L2_CID_AUDIO_BASS: | |
1004 | case V4L2_CID_AUDIO_TREBLE: | |
1005 | case V4L2_CID_AUDIO_BALANCE: | |
1006 | case V4L2_CID_AUDIO_MUTE: | |
2a03f034 | 1007 | if (is_cx2583x(state)) |
e2b8cf4c | 1008 | return -EINVAL; |
df1d5ed8 | 1009 | return cx25840_audio_g_ctrl(sd, ctrl); |
bd985160 HV |
1010 | default: |
1011 | return -EINVAL; | |
1012 | } | |
1013 | ||
1014 | return 0; | |
1015 | } | |
1016 | ||
1017 | /* ----------------------------------------------------------------------- */ | |
1018 | ||
9357b31c | 1019 | static int cx25840_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) |
bd985160 HV |
1020 | { |
1021 | switch (fmt->type) { | |
1022 | case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: | |
df1d5ed8 | 1023 | return cx25840_vbi_g_fmt(sd, fmt); |
bd985160 HV |
1024 | default: |
1025 | return -EINVAL; | |
1026 | } | |
bd985160 HV |
1027 | return 0; |
1028 | } | |
1029 | ||
9357b31c | 1030 | static int cx25840_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) |
bd985160 | 1031 | { |
9357b31c HV |
1032 | struct cx25840_state *state = to_state(sd); |
1033 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 HV |
1034 | struct v4l2_pix_format *pix; |
1035 | int HSC, VSC, Vsrc, Hsrc, filter, Vlines; | |
081b496a | 1036 | int is_50Hz = !(state->std & V4L2_STD_525_60); |
bd985160 HV |
1037 | |
1038 | switch (fmt->type) { | |
1039 | case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
1040 | pix = &(fmt->fmt.pix); | |
1041 | ||
1042 | Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4; | |
1043 | Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4; | |
1044 | ||
1045 | Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4; | |
1046 | Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4; | |
1047 | ||
ba70d59b | 1048 | Vlines = pix->height + (is_50Hz ? 4 : 7); |
bd985160 HV |
1049 | |
1050 | if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) || | |
1051 | (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { | |
fac9e899 | 1052 | v4l_err(client, "%dx%d is not a valid size!\n", |
bd985160 HV |
1053 | pix->width, pix->height); |
1054 | return -ERANGE; | |
1055 | } | |
1056 | ||
1057 | HSC = (Hsrc * (1 << 20)) / pix->width - (1 << 20); | |
1058 | VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); | |
1059 | VSC &= 0x1fff; | |
1060 | ||
1061 | if (pix->width >= 385) | |
1062 | filter = 0; | |
1063 | else if (pix->width > 192) | |
1064 | filter = 1; | |
1065 | else if (pix->width > 96) | |
1066 | filter = 2; | |
1067 | else | |
1068 | filter = 3; | |
1069 | ||
b5fc7144 | 1070 | v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale %ux%u\n", |
bd985160 HV |
1071 | pix->width, pix->height, HSC, VSC); |
1072 | ||
1073 | /* HSCALE=HSC */ | |
1074 | cx25840_write(client, 0x418, HSC & 0xff); | |
1075 | cx25840_write(client, 0x419, (HSC >> 8) & 0xff); | |
1076 | cx25840_write(client, 0x41a, HSC >> 16); | |
1077 | /* VSCALE=VSC */ | |
1078 | cx25840_write(client, 0x41c, VSC & 0xff); | |
1079 | cx25840_write(client, 0x41d, VSC >> 8); | |
1080 | /* VS_INTRLACE=1 VFILT=filter */ | |
1081 | cx25840_write(client, 0x41e, 0x8 | filter); | |
1082 | break; | |
1083 | ||
1084 | case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: | |
df1d5ed8 | 1085 | return cx25840_vbi_s_fmt(sd, fmt); |
bd985160 HV |
1086 | |
1087 | case V4L2_BUF_TYPE_VBI_CAPTURE: | |
df1d5ed8 | 1088 | return cx25840_vbi_s_fmt(sd, fmt); |
bd985160 HV |
1089 | |
1090 | default: | |
1091 | return -EINVAL; | |
1092 | } | |
1093 | ||
1094 | return 0; | |
1095 | } | |
1096 | ||
1097 | /* ----------------------------------------------------------------------- */ | |
1098 | ||
1a39275a HV |
1099 | static void log_video_status(struct i2c_client *client) |
1100 | { | |
1101 | static const char *const fmt_strs[] = { | |
1102 | "0x0", | |
1103 | "NTSC-M", "NTSC-J", "NTSC-4.43", | |
1104 | "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", | |
1105 | "0x9", "0xA", "0xB", | |
1106 | "SECAM", | |
1107 | "0xD", "0xE", "0xF" | |
1108 | }; | |
1109 | ||
9357b31c | 1110 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
1a39275a HV |
1111 | u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf; |
1112 | u8 gen_stat1 = cx25840_read(client, 0x40d); | |
1113 | u8 gen_stat2 = cx25840_read(client, 0x40e); | |
1114 | int vid_input = state->vid_input; | |
1115 | ||
1116 | v4l_info(client, "Video signal: %spresent\n", | |
1117 | (gen_stat2 & 0x20) ? "" : "not "); | |
1118 | v4l_info(client, "Detected format: %s\n", | |
1119 | fmt_strs[gen_stat1 & 0xf]); | |
1120 | ||
1121 | v4l_info(client, "Specified standard: %s\n", | |
1122 | vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection"); | |
1123 | ||
1124 | if (vid_input >= CX25840_COMPOSITE1 && | |
1125 | vid_input <= CX25840_COMPOSITE8) { | |
1126 | v4l_info(client, "Specified video input: Composite %d\n", | |
1127 | vid_input - CX25840_COMPOSITE1 + 1); | |
1128 | } else { | |
1129 | v4l_info(client, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n", | |
1130 | (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); | |
1131 | } | |
1132 | ||
1133 | v4l_info(client, "Specified audioclock freq: %d Hz\n", state->audclk_freq); | |
1134 | } | |
1135 | ||
1136 | /* ----------------------------------------------------------------------- */ | |
1137 | ||
1138 | static void log_audio_status(struct i2c_client *client) | |
1139 | { | |
9357b31c | 1140 | struct cx25840_state *state = to_state(i2c_get_clientdata(client)); |
1a39275a HV |
1141 | u8 download_ctl = cx25840_read(client, 0x803); |
1142 | u8 mod_det_stat0 = cx25840_read(client, 0x804); | |
1143 | u8 mod_det_stat1 = cx25840_read(client, 0x805); | |
1144 | u8 audio_config = cx25840_read(client, 0x808); | |
1145 | u8 pref_mode = cx25840_read(client, 0x809); | |
1146 | u8 afc0 = cx25840_read(client, 0x80b); | |
1147 | u8 mute_ctl = cx25840_read(client, 0x8d3); | |
1148 | int aud_input = state->aud_input; | |
1149 | char *p; | |
1150 | ||
1151 | switch (mod_det_stat0) { | |
1152 | case 0x00: p = "mono"; break; | |
1153 | case 0x01: p = "stereo"; break; | |
1154 | case 0x02: p = "dual"; break; | |
1155 | case 0x04: p = "tri"; break; | |
1156 | case 0x10: p = "mono with SAP"; break; | |
1157 | case 0x11: p = "stereo with SAP"; break; | |
1158 | case 0x12: p = "dual with SAP"; break; | |
1159 | case 0x14: p = "tri with SAP"; break; | |
1160 | case 0xfe: p = "forced mode"; break; | |
1161 | default: p = "not defined"; | |
1162 | } | |
1163 | v4l_info(client, "Detected audio mode: %s\n", p); | |
1164 | ||
1165 | switch (mod_det_stat1) { | |
1166 | case 0x00: p = "not defined"; break; | |
1167 | case 0x01: p = "EIAJ"; break; | |
1168 | case 0x02: p = "A2-M"; break; | |
1169 | case 0x03: p = "A2-BG"; break; | |
1170 | case 0x04: p = "A2-DK1"; break; | |
1171 | case 0x05: p = "A2-DK2"; break; | |
1172 | case 0x06: p = "A2-DK3"; break; | |
1173 | case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; | |
1174 | case 0x08: p = "AM-L"; break; | |
1175 | case 0x09: p = "NICAM-BG"; break; | |
1176 | case 0x0a: p = "NICAM-DK"; break; | |
1177 | case 0x0b: p = "NICAM-I"; break; | |
1178 | case 0x0c: p = "NICAM-L"; break; | |
1179 | case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; | |
1180 | case 0x0e: p = "IF FM Radio"; break; | |
1181 | case 0x0f: p = "BTSC"; break; | |
1182 | case 0x10: p = "high-deviation FM"; break; | |
1183 | case 0x11: p = "very high-deviation FM"; break; | |
1184 | case 0xfd: p = "unknown audio standard"; break; | |
1185 | case 0xfe: p = "forced audio standard"; break; | |
1186 | case 0xff: p = "no detected audio standard"; break; | |
1187 | default: p = "not defined"; | |
1188 | } | |
1189 | v4l_info(client, "Detected audio standard: %s\n", p); | |
1190 | v4l_info(client, "Audio muted: %s\n", | |
1191 | (state->unmute_volume >= 0) ? "yes" : "no"); | |
1192 | v4l_info(client, "Audio microcontroller: %s\n", | |
1193 | (download_ctl & 0x10) ? | |
1194 | ((mute_ctl & 0x2) ? "detecting" : "running") : "stopped"); | |
1195 | ||
1196 | switch (audio_config >> 4) { | |
1197 | case 0x00: p = "undefined"; break; | |
1198 | case 0x01: p = "BTSC"; break; | |
1199 | case 0x02: p = "EIAJ"; break; | |
1200 | case 0x03: p = "A2-M"; break; | |
1201 | case 0x04: p = "A2-BG"; break; | |
1202 | case 0x05: p = "A2-DK1"; break; | |
1203 | case 0x06: p = "A2-DK2"; break; | |
1204 | case 0x07: p = "A2-DK3"; break; | |
1205 | case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; | |
1206 | case 0x09: p = "AM-L"; break; | |
1207 | case 0x0a: p = "NICAM-BG"; break; | |
1208 | case 0x0b: p = "NICAM-DK"; break; | |
1209 | case 0x0c: p = "NICAM-I"; break; | |
1210 | case 0x0d: p = "NICAM-L"; break; | |
1211 | case 0x0e: p = "FM radio"; break; | |
1212 | case 0x0f: p = "automatic detection"; break; | |
1213 | default: p = "undefined"; | |
1214 | } | |
1215 | v4l_info(client, "Configured audio standard: %s\n", p); | |
1216 | ||
1217 | if ((audio_config >> 4) < 0xF) { | |
1218 | switch (audio_config & 0xF) { | |
1219 | case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; | |
1220 | case 0x01: p = "MONO2 (LANGUAGE B)"; break; | |
1221 | case 0x02: p = "MONO3 (STEREO forced MONO)"; break; | |
1222 | case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; | |
1223 | case 0x04: p = "STEREO"; break; | |
1224 | case 0x05: p = "DUAL1 (AB)"; break; | |
1225 | case 0x06: p = "DUAL2 (AC) (FM)"; break; | |
1226 | case 0x07: p = "DUAL3 (BC) (FM)"; break; | |
1227 | case 0x08: p = "DUAL4 (AC) (AM)"; break; | |
1228 | case 0x09: p = "DUAL5 (BC) (AM)"; break; | |
1229 | case 0x0a: p = "SAP"; break; | |
1230 | default: p = "undefined"; | |
1231 | } | |
1232 | v4l_info(client, "Configured audio mode: %s\n", p); | |
1233 | } else { | |
1234 | switch (audio_config & 0xF) { | |
1235 | case 0x00: p = "BG"; break; | |
1236 | case 0x01: p = "DK1"; break; | |
1237 | case 0x02: p = "DK2"; break; | |
1238 | case 0x03: p = "DK3"; break; | |
1239 | case 0x04: p = "I"; break; | |
1240 | case 0x05: p = "L"; break; | |
1241 | case 0x06: p = "BTSC"; break; | |
1242 | case 0x07: p = "EIAJ"; break; | |
1243 | case 0x08: p = "A2-M"; break; | |
1244 | case 0x09: p = "FM Radio"; break; | |
1245 | case 0x0f: p = "automatic standard and mode detection"; break; | |
1246 | default: p = "undefined"; | |
1247 | } | |
1248 | v4l_info(client, "Configured audio system: %s\n", p); | |
1249 | } | |
1250 | ||
1251 | if (aud_input) { | |
1252 | v4l_info(client, "Specified audio input: Tuner (In%d)\n", aud_input); | |
1253 | } else { | |
1254 | v4l_info(client, "Specified audio input: External\n"); | |
1255 | } | |
1256 | ||
1257 | switch (pref_mode & 0xf) { | |
1258 | case 0: p = "mono/language A"; break; | |
1259 | case 1: p = "language B"; break; | |
1260 | case 2: p = "language C"; break; | |
1261 | case 3: p = "analog fallback"; break; | |
1262 | case 4: p = "stereo"; break; | |
1263 | case 5: p = "language AC"; break; | |
1264 | case 6: p = "language BC"; break; | |
1265 | case 7: p = "language AB"; break; | |
1266 | default: p = "undefined"; | |
1267 | } | |
1268 | v4l_info(client, "Preferred audio mode: %s\n", p); | |
1269 | ||
1270 | if ((audio_config & 0xf) == 0xf) { | |
1271 | switch ((afc0 >> 3) & 0x3) { | |
1272 | case 0: p = "system DK"; break; | |
1273 | case 1: p = "system L"; break; | |
1274 | case 2: p = "autodetect"; break; | |
1275 | default: p = "undefined"; | |
1276 | } | |
1277 | v4l_info(client, "Selected 65 MHz format: %s\n", p); | |
1278 | ||
1279 | switch (afc0 & 0x7) { | |
1280 | case 0: p = "chroma"; break; | |
1281 | case 1: p = "BTSC"; break; | |
1282 | case 2: p = "EIAJ"; break; | |
1283 | case 3: p = "A2-M"; break; | |
1284 | case 4: p = "autodetect"; break; | |
1285 | default: p = "undefined"; | |
1286 | } | |
1287 | v4l_info(client, "Selected 45 MHz format: %s\n", p); | |
1288 | } | |
1289 | } | |
1290 | ||
1291 | /* ----------------------------------------------------------------------- */ | |
1292 | ||
cc26b076 | 1293 | /* This load_fw operation must be called to load the driver's firmware. |
6ca187ab HV |
1294 | Without this the audio standard detection will fail and you will |
1295 | only get mono. | |
1296 | ||
1297 | Since loading the firmware is often problematic when the driver is | |
1298 | compiled into the kernel I recommend postponing calling this function | |
1299 | until the first open of the video device. Another reason for | |
1300 | postponing it is that loading this firmware takes a long time (seconds) | |
1301 | due to the slow i2c bus speed. So it will speed up the boot process if | |
1302 | you can avoid loading the fw as long as the video device isn't used. */ | |
cc26b076 | 1303 | static int cx25840_load_fw(struct v4l2_subdev *sd) |
bd985160 | 1304 | { |
9357b31c HV |
1305 | struct cx25840_state *state = to_state(sd); |
1306 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
c976bc82 HV |
1307 | |
1308 | if (!state->is_initialized) { | |
cc26b076 | 1309 | /* initialize and load firmware */ |
c976bc82 | 1310 | state->is_initialized = 1; |
2a03f034 | 1311 | if (is_cx2583x(state)) |
c976bc82 | 1312 | cx25836_initialize(client); |
2a03f034 | 1313 | else if (is_cx2388x(state)) |
f234081b | 1314 | cx23885_initialize(client); |
2a03f034 | 1315 | else if (is_cx231xx(state)) |
149783b5 | 1316 | cx231xx_initialize(client); |
c976bc82 | 1317 | else |
89fc4eb9 | 1318 | cx25840_initialize(client); |
c976bc82 | 1319 | } |
9357b31c HV |
1320 | return 0; |
1321 | } | |
c976bc82 | 1322 | |
bd985160 | 1323 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
aecde8b5 | 1324 | static int cx25840_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
9357b31c HV |
1325 | { |
1326 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
f234081b | 1327 | |
aecde8b5 | 1328 | if (!v4l2_chip_match_i2c_client(client, ®->match)) |
9357b31c HV |
1329 | return -EINVAL; |
1330 | if (!capable(CAP_SYS_ADMIN)) | |
1331 | return -EPERM; | |
aecde8b5 | 1332 | reg->size = 1; |
9357b31c HV |
1333 | reg->val = cx25840_read(client, reg->reg & 0x0fff); |
1334 | return 0; | |
1335 | } | |
1336 | ||
aecde8b5 | 1337 | static int cx25840_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) |
9357b31c HV |
1338 | { |
1339 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
1340 | ||
aecde8b5 | 1341 | if (!v4l2_chip_match_i2c_client(client, ®->match)) |
9357b31c HV |
1342 | return -EINVAL; |
1343 | if (!capable(CAP_SYS_ADMIN)) | |
1344 | return -EPERM; | |
1345 | cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff); | |
1346 | return 0; | |
1347 | } | |
bd985160 HV |
1348 | #endif |
1349 | ||
9357b31c HV |
1350 | static int cx25840_s_stream(struct v4l2_subdev *sd, int enable) |
1351 | { | |
1352 | struct cx25840_state *state = to_state(sd); | |
1353 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1354 | |
9357b31c HV |
1355 | v4l_dbg(1, cx25840_debug, client, "%s output\n", |
1356 | enable ? "enable" : "disable"); | |
1357 | if (enable) { | |
2a03f034 | 1358 | if (is_cx2388x(state) || is_cx231xx(state)) { |
f234081b ST |
1359 | u8 v = (cx25840_read(client, 0x421) | 0x0b); |
1360 | cx25840_write(client, 0x421, v); | |
1361 | } else { | |
1362 | cx25840_write(client, 0x115, | |
2a03f034 | 1363 | is_cx2583x(state) ? 0x0c : 0x8c); |
f234081b | 1364 | cx25840_write(client, 0x116, |
2a03f034 | 1365 | is_cx2583x(state) ? 0x04 : 0x07); |
f234081b | 1366 | } |
9357b31c | 1367 | } else { |
2a03f034 | 1368 | if (is_cx2388x(state) || is_cx231xx(state)) { |
f234081b ST |
1369 | u8 v = cx25840_read(client, 0x421) & ~(0x0b); |
1370 | cx25840_write(client, 0x421, v); | |
1371 | } else { | |
1372 | cx25840_write(client, 0x115, 0x00); | |
1373 | cx25840_write(client, 0x116, 0x00); | |
1374 | } | |
9357b31c HV |
1375 | } |
1376 | return 0; | |
1377 | } | |
bd985160 | 1378 | |
9357b31c HV |
1379 | static int cx25840_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) |
1380 | { | |
1381 | struct cx25840_state *state = to_state(sd); | |
bd985160 | 1382 | |
9357b31c HV |
1383 | switch (qc->id) { |
1384 | case V4L2_CID_BRIGHTNESS: | |
10afbef1 | 1385 | return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); |
9357b31c HV |
1386 | case V4L2_CID_CONTRAST: |
1387 | case V4L2_CID_SATURATION: | |
10afbef1 | 1388 | return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64); |
9357b31c | 1389 | case V4L2_CID_HUE: |
10afbef1 | 1390 | return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); |
9357b31c HV |
1391 | default: |
1392 | break; | |
1393 | } | |
2a03f034 | 1394 | if (is_cx2583x(state)) |
9357b31c | 1395 | return -EINVAL; |
bd985160 | 1396 | |
9357b31c HV |
1397 | switch (qc->id) { |
1398 | case V4L2_CID_AUDIO_VOLUME: | |
1399 | return v4l2_ctrl_query_fill(qc, 0, 65535, | |
1400 | 65535 / 100, state->default_volume); | |
1401 | case V4L2_CID_AUDIO_MUTE: | |
10afbef1 | 1402 | return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); |
9357b31c HV |
1403 | case V4L2_CID_AUDIO_BALANCE: |
1404 | case V4L2_CID_AUDIO_BASS: | |
1405 | case V4L2_CID_AUDIO_TREBLE: | |
10afbef1 | 1406 | return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); |
9357b31c HV |
1407 | default: |
1408 | return -EINVAL; | |
1409 | } | |
1410 | return -EINVAL; | |
1411 | } | |
bd985160 | 1412 | |
9357b31c HV |
1413 | static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std) |
1414 | { | |
1415 | struct cx25840_state *state = to_state(sd); | |
1416 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
d92c20e0 | 1417 | |
9357b31c HV |
1418 | if (state->radio == 0 && state->std == std) |
1419 | return 0; | |
1420 | state->radio = 0; | |
1421 | state->std = std; | |
1422 | return set_v4lstd(client); | |
1423 | } | |
e2b8cf4c | 1424 | |
9357b31c HV |
1425 | static int cx25840_s_radio(struct v4l2_subdev *sd) |
1426 | { | |
1427 | struct cx25840_state *state = to_state(sd); | |
d92c20e0 | 1428 | |
9357b31c HV |
1429 | state->radio = 1; |
1430 | return 0; | |
1431 | } | |
bd985160 | 1432 | |
5325b427 HV |
1433 | static int cx25840_s_video_routing(struct v4l2_subdev *sd, |
1434 | u32 input, u32 output, u32 config) | |
9357b31c HV |
1435 | { |
1436 | struct cx25840_state *state = to_state(sd); | |
1437 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
3faeeae4 | 1438 | |
5325b427 | 1439 | return set_input(client, input, state->aud_input); |
9357b31c | 1440 | } |
bd985160 | 1441 | |
5325b427 HV |
1442 | static int cx25840_s_audio_routing(struct v4l2_subdev *sd, |
1443 | u32 input, u32 output, u32 config) | |
9357b31c HV |
1444 | { |
1445 | struct cx25840_state *state = to_state(sd); | |
1446 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1447 | |
2a03f034 | 1448 | if (is_cx2583x(state)) |
9357b31c | 1449 | return -EINVAL; |
5325b427 | 1450 | return set_input(client, state->vid_input, input); |
9357b31c | 1451 | } |
bd985160 | 1452 | |
9357b31c HV |
1453 | static int cx25840_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) |
1454 | { | |
1455 | struct cx25840_state *state = to_state(sd); | |
1456 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
a8bbf12a | 1457 | |
2a03f034 | 1458 | if (!is_cx2583x(state)) |
9357b31c HV |
1459 | input_change(client); |
1460 | return 0; | |
1461 | } | |
a8bbf12a | 1462 | |
9357b31c HV |
1463 | static int cx25840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) |
1464 | { | |
1465 | struct cx25840_state *state = to_state(sd); | |
1466 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
1467 | u8 vpres = cx25840_read(client, 0x40e) & 0x20; | |
1468 | u8 mode; | |
1469 | int val = 0; | |
bd985160 | 1470 | |
9357b31c HV |
1471 | if (state->radio) |
1472 | return 0; | |
bd985160 | 1473 | |
9357b31c | 1474 | vt->signal = vpres ? 0xffff : 0x0; |
2a03f034 | 1475 | if (is_cx2583x(state)) |
9357b31c | 1476 | return 0; |
3faeeae4 | 1477 | |
9357b31c HV |
1478 | vt->capability |= |
1479 | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | | |
1480 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; | |
e2b8cf4c | 1481 | |
9357b31c | 1482 | mode = cx25840_read(client, 0x804); |
bd985160 | 1483 | |
9357b31c HV |
1484 | /* get rxsubchans and audmode */ |
1485 | if ((mode & 0xf) == 1) | |
1486 | val |= V4L2_TUNER_SUB_STEREO; | |
1487 | else | |
1488 | val |= V4L2_TUNER_SUB_MONO; | |
bd985160 | 1489 | |
9357b31c HV |
1490 | if (mode == 2 || mode == 4) |
1491 | val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; | |
bd985160 | 1492 | |
9357b31c HV |
1493 | if (mode & 0x10) |
1494 | val |= V4L2_TUNER_SUB_SAP; | |
bd985160 | 1495 | |
9357b31c HV |
1496 | vt->rxsubchans = val; |
1497 | vt->audmode = state->audmode; | |
1498 | return 0; | |
1499 | } | |
bd985160 | 1500 | |
9357b31c HV |
1501 | static int cx25840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) |
1502 | { | |
1503 | struct cx25840_state *state = to_state(sd); | |
1504 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1505 | |
2a03f034 | 1506 | if (state->radio || is_cx2583x(state)) |
9357b31c | 1507 | return 0; |
8a4b275f | 1508 | |
9357b31c | 1509 | switch (vt->audmode) { |
bd985160 | 1510 | case V4L2_TUNER_MODE_MONO: |
8a4b275f HV |
1511 | /* mono -> mono |
1512 | stereo -> mono | |
1513 | bilingual -> lang1 */ | |
bd985160 HV |
1514 | cx25840_and_or(client, 0x809, ~0xf, 0x00); |
1515 | break; | |
301e22d6 | 1516 | case V4L2_TUNER_MODE_STEREO: |
8a4b275f HV |
1517 | case V4L2_TUNER_MODE_LANG1: |
1518 | /* mono -> mono | |
1519 | stereo -> stereo | |
1520 | bilingual -> lang1 */ | |
bd985160 HV |
1521 | cx25840_and_or(client, 0x809, ~0xf, 0x04); |
1522 | break; | |
301e22d6 | 1523 | case V4L2_TUNER_MODE_LANG1_LANG2: |
8a4b275f HV |
1524 | /* mono -> mono |
1525 | stereo -> stereo | |
1526 | bilingual -> lang1/lang2 */ | |
1527 | cx25840_and_or(client, 0x809, ~0xf, 0x07); | |
1528 | break; | |
bd985160 | 1529 | case V4L2_TUNER_MODE_LANG2: |
8a4b275f | 1530 | /* mono -> mono |
301e22d6 | 1531 | stereo -> stereo |
8a4b275f | 1532 | bilingual -> lang2 */ |
bd985160 HV |
1533 | cx25840_and_or(client, 0x809, ~0xf, 0x01); |
1534 | break; | |
8a4b275f HV |
1535 | default: |
1536 | return -EINVAL; | |
9357b31c HV |
1537 | } |
1538 | state->audmode = vt->audmode; | |
1539 | return 0; | |
1540 | } | |
bd985160 | 1541 | |
9357b31c HV |
1542 | static int cx25840_reset(struct v4l2_subdev *sd, u32 val) |
1543 | { | |
1544 | struct cx25840_state *state = to_state(sd); | |
1545 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1546 | |
2a03f034 | 1547 | if (is_cx2583x(state)) |
9357b31c | 1548 | cx25836_initialize(client); |
2a03f034 | 1549 | else if (is_cx2388x(state)) |
9357b31c | 1550 | cx23885_initialize(client); |
2a03f034 | 1551 | else if (is_cx231xx(state)) |
149783b5 | 1552 | cx231xx_initialize(client); |
9357b31c HV |
1553 | else |
1554 | cx25840_initialize(client); | |
1555 | return 0; | |
1556 | } | |
bd985160 | 1557 | |
aecde8b5 | 1558 | static int cx25840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) |
9357b31c HV |
1559 | { |
1560 | struct cx25840_state *state = to_state(sd); | |
1561 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1562 | |
9357b31c HV |
1563 | return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev); |
1564 | } | |
bd985160 | 1565 | |
9357b31c HV |
1566 | static int cx25840_log_status(struct v4l2_subdev *sd) |
1567 | { | |
1568 | struct cx25840_state *state = to_state(sd); | |
1569 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
bd985160 | 1570 | |
9357b31c | 1571 | log_video_status(client); |
2a03f034 | 1572 | if (!is_cx2583x(state)) |
9357b31c | 1573 | log_audio_status(client); |
3faeeae4 | 1574 | return 0; |
bd985160 HV |
1575 | } |
1576 | ||
9357b31c HV |
1577 | /* ----------------------------------------------------------------------- */ |
1578 | ||
1579 | static const struct v4l2_subdev_core_ops cx25840_core_ops = { | |
1580 | .log_status = cx25840_log_status, | |
1581 | .g_chip_ident = cx25840_g_chip_ident, | |
1582 | .g_ctrl = cx25840_g_ctrl, | |
1583 | .s_ctrl = cx25840_s_ctrl, | |
1584 | .queryctrl = cx25840_queryctrl, | |
f41737ec | 1585 | .s_std = cx25840_s_std, |
9357b31c | 1586 | .reset = cx25840_reset, |
cc26b076 | 1587 | .load_fw = cx25840_load_fw, |
9357b31c HV |
1588 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
1589 | .g_register = cx25840_g_register, | |
1590 | .s_register = cx25840_s_register, | |
1591 | #endif | |
1592 | }; | |
1593 | ||
1594 | static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = { | |
1595 | .s_frequency = cx25840_s_frequency, | |
9357b31c HV |
1596 | .s_radio = cx25840_s_radio, |
1597 | .g_tuner = cx25840_g_tuner, | |
1598 | .s_tuner = cx25840_s_tuner, | |
1599 | }; | |
1600 | ||
1601 | static const struct v4l2_subdev_audio_ops cx25840_audio_ops = { | |
1602 | .s_clock_freq = cx25840_s_clock_freq, | |
1603 | .s_routing = cx25840_s_audio_routing, | |
1604 | }; | |
1605 | ||
1606 | static const struct v4l2_subdev_video_ops cx25840_video_ops = { | |
1607 | .s_routing = cx25840_s_video_routing, | |
1608 | .g_fmt = cx25840_g_fmt, | |
1609 | .s_fmt = cx25840_s_fmt, | |
1610 | .decode_vbi_line = cx25840_decode_vbi_line, | |
1611 | .s_stream = cx25840_s_stream, | |
1612 | }; | |
1613 | ||
1614 | static const struct v4l2_subdev_ops cx25840_ops = { | |
1615 | .core = &cx25840_core_ops, | |
1616 | .tuner = &cx25840_tuner_ops, | |
1617 | .audio = &cx25840_audio_ops, | |
1618 | .video = &cx25840_video_ops, | |
1619 | }; | |
1620 | ||
bd985160 HV |
1621 | /* ----------------------------------------------------------------------- */ |
1622 | ||
c7dd1ecd AW |
1623 | static u32 get_cx2388x_ident(struct i2c_client *client) |
1624 | { | |
1625 | u32 ret; | |
1626 | ||
1627 | /* Come out of digital power down */ | |
1628 | cx25840_write(client, 0x000, 0); | |
1629 | ||
8c2d7821 ST |
1630 | /* Detecting whether the part is cx23885/7/8 is more |
1631 | * difficult than it needs to be. No ID register. Instead we | |
1632 | * probe certain registers indicated in the datasheets to look | |
1633 | * for specific defaults that differ between the silicon designs. */ | |
1634 | ||
1635 | /* It's either 885/7 if the IR Tx Clk Divider register exists */ | |
c7dd1ecd | 1636 | if (cx25840_read4(client, 0x204) & 0xffff) { |
8c2d7821 ST |
1637 | /* CX23885 returns bogus repetitive byte values for the DIF, |
1638 | * which doesn't exist for it. (Ex. 8a8a8a8a or 31313131) */ | |
1639 | ret = cx25840_read4(client, 0x300); | |
1640 | if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) { | |
1641 | /* No DIF */ | |
1642 | ret = V4L2_IDENT_CX23885_AV; | |
1643 | } else { | |
1644 | /* CX23887 has a broken DIF, but the registers | |
1645 | * appear valid (but unsed), good enough to detect. */ | |
1646 | ret = V4L2_IDENT_CX23887_AV; | |
1647 | } | |
c7dd1ecd AW |
1648 | } else if (cx25840_read4(client, 0x300) & 0x0fffffff) { |
1649 | /* DIF PLL Freq Word reg exists; chip must be a CX23888 */ | |
1650 | ret = V4L2_IDENT_CX23888_AV; | |
1651 | } else { | |
8c2d7821 | 1652 | v4l_err(client, "Unable to detect h/w, assuming cx23887\n"); |
c7dd1ecd AW |
1653 | ret = V4L2_IDENT_CX23887_AV; |
1654 | } | |
1655 | ||
1656 | /* Back into digital power down */ | |
1657 | cx25840_write(client, 0x000, 2); | |
1658 | return ret; | |
1659 | } | |
1660 | ||
d2653e92 JD |
1661 | static int cx25840_probe(struct i2c_client *client, |
1662 | const struct i2c_device_id *did) | |
bd985160 | 1663 | { |
bd985160 | 1664 | struct cx25840_state *state; |
9357b31c | 1665 | struct v4l2_subdev *sd; |
c7dd1ecd | 1666 | u32 id = V4L2_IDENT_NONE; |
bd985160 HV |
1667 | u16 device_id; |
1668 | ||
188f3457 HV |
1669 | /* Check if the adapter supports the needed features */ |
1670 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
1671 | return -EIO; | |
1672 | ||
21340ae0 | 1673 | v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", client->addr << 1); |
bd985160 HV |
1674 | |
1675 | device_id = cx25840_read(client, 0x101) << 8; | |
1676 | device_id |= cx25840_read(client, 0x100); | |
f234081b | 1677 | v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id); |
bd985160 HV |
1678 | |
1679 | /* The high byte of the device ID should be | |
e2b8cf4c HV |
1680 | * 0x83 for the cx2583x and 0x84 for the cx2584x */ |
1681 | if ((device_id & 0xff00) == 0x8300) { | |
1682 | id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; | |
c7dd1ecd | 1683 | } else if ((device_id & 0xff00) == 0x8400) { |
e2b8cf4c | 1684 | id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf); |
00ca7324 | 1685 | } else if (device_id == 0x0000) { |
c7dd1ecd | 1686 | id = get_cx2388x_ident(client); |
149783b5 | 1687 | } else if ((device_id & 0xfff0) == 0x5A30) { |
c7dd1ecd AW |
1688 | /* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */ |
1689 | id = V4L2_IDENT_CX2310X_AV; | |
1690 | } else if ((device_id & 0xff) == (device_id >> 8)) { | |
1691 | v4l_err(client, | |
1692 | "likely a confused/unresponsive cx2388[578] A/V decoder" | |
1693 | " found @ 0x%x (%s)\n", | |
1694 | client->addr << 1, client->adapter->name); | |
1695 | v4l_err(client, "A method to reset it from the cx25840 driver" | |
1696 | " software is not known at this time\n"); | |
1697 | return -ENODEV; | |
1698 | } else { | |
b5fc7144 | 1699 | v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); |
188f3457 | 1700 | return -ENODEV; |
bd985160 HV |
1701 | } |
1702 | ||
21340ae0 | 1703 | state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL); |
9357b31c | 1704 | if (state == NULL) |
21340ae0 | 1705 | return -ENOMEM; |
21340ae0 | 1706 | |
9357b31c HV |
1707 | sd = &state->sd; |
1708 | v4l2_i2c_subdev_init(sd, client, &cx25840_ops); | |
c7dd1ecd AW |
1709 | switch (id) { |
1710 | case V4L2_IDENT_CX23885_AV: | |
c7dd1ecd AW |
1711 | v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n", |
1712 | client->addr << 1, client->adapter->name); | |
1713 | break; | |
1714 | case V4L2_IDENT_CX23887_AV: | |
c7dd1ecd AW |
1715 | v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n", |
1716 | client->addr << 1, client->adapter->name); | |
1717 | break; | |
1718 | case V4L2_IDENT_CX23888_AV: | |
c7dd1ecd AW |
1719 | v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n", |
1720 | client->addr << 1, client->adapter->name); | |
1721 | break; | |
1722 | case V4L2_IDENT_CX2310X_AV: | |
c7dd1ecd AW |
1723 | v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n", |
1724 | device_id, client->addr << 1, client->adapter->name); | |
1725 | break; | |
1726 | case V4L2_IDENT_CX25840: | |
1727 | case V4L2_IDENT_CX25841: | |
1728 | case V4L2_IDENT_CX25842: | |
1729 | case V4L2_IDENT_CX25843: | |
1730 | /* Note: revision '(device_id & 0x0f) == 2' was never built. The | |
1731 | marking skips from 0x1 == 22 to 0x3 == 23. */ | |
1732 | v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n", | |
1733 | (device_id & 0xfff0) >> 4, | |
1734 | (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 | |
1735 | : (device_id & 0x0f), | |
1736 | client->addr << 1, client->adapter->name); | |
1737 | break; | |
1738 | case V4L2_IDENT_CX25836: | |
1739 | case V4L2_IDENT_CX25837: | |
c7dd1ecd AW |
1740 | default: |
1741 | v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n", | |
1742 | (device_id & 0xfff0) >> 4, device_id & 0x0f, | |
1743 | client->addr << 1, client->adapter->name); | |
1744 | break; | |
1745 | } | |
bd985160 | 1746 | |
21340ae0 | 1747 | state->c = client; |
a8bbf12a HV |
1748 | state->vid_input = CX25840_COMPOSITE7; |
1749 | state->aud_input = CX25840_AUDIO8; | |
3578d3dd | 1750 | state->audclk_freq = 48000; |
a8bbf12a | 1751 | state->pvr150_workaround = 0; |
8a4b275f | 1752 | state->audmode = V4L2_TUNER_MODE_LANG1; |
87410dab | 1753 | state->unmute_volume = -1; |
ca130eef HV |
1754 | state->default_volume = 228 - cx25840_read(client, 0x8d4); |
1755 | state->default_volume = ((state->default_volume / 2) + 23) << 9; | |
3e3bf277 | 1756 | state->vbi_line_offset = 8; |
e2b8cf4c | 1757 | state->id = id; |
3434eb7e | 1758 | state->rev = device_id; |
f234081b | 1759 | |
bd985160 HV |
1760 | return 0; |
1761 | } | |
1762 | ||
1a39275a | 1763 | static int cx25840_remove(struct i2c_client *client) |
bd985160 | 1764 | { |
9357b31c HV |
1765 | struct v4l2_subdev *sd = i2c_get_clientdata(client); |
1766 | ||
1767 | v4l2_device_unregister_subdev(sd); | |
1768 | kfree(to_state(sd)); | |
bd985160 HV |
1769 | return 0; |
1770 | } | |
1771 | ||
af294867 JD |
1772 | static const struct i2c_device_id cx25840_id[] = { |
1773 | { "cx25840", 0 }, | |
1774 | { } | |
1775 | }; | |
1776 | MODULE_DEVICE_TABLE(i2c, cx25840_id); | |
1777 | ||
1a39275a HV |
1778 | static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
1779 | .name = "cx25840", | |
1a39275a HV |
1780 | .probe = cx25840_probe, |
1781 | .remove = cx25840_remove, | |
af294867 | 1782 | .id_table = cx25840_id, |
bd985160 | 1783 | }; |