[linux-2.6-block.git] / drivers / media / video / cx23885 / cx23885-cards.c

/*
 *  Driver for the Conexant CX23885 PCIe bridge
 *
 *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <media/cx25840.h>

#include "cx23885.h"

/* ------------------------------------------------------------------ */
/* board config info                                                  */

struct cx23885_board cx23885_boards[] = {
	[CX23885_BOARD_UNKNOWN] = {
		.name		= "UNKNOWN/GENERIC",
		/* Ensure safe default for unknown boards */
		.clk_freq       = 0,
		.input          = {{
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 0,
		},{
			.type   = CX23885_VMUX_COMPOSITE2,
			.vmux   = 1,
		},{
			.type   = CX23885_VMUX_COMPOSITE3,
			.vmux   = 2,
		},{
			.type   = CX23885_VMUX_COMPOSITE4,
			.vmux   = 3,
		}},
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
		.name		= "Hauppauge WinTV-HVR1800lp",
		.portc		= CX23885_MPEG_DVB,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = 0,
			.gpio0  = 0xff00,
		},{
			.type   = CX23885_VMUX_DEBUG,
			.vmux   = 0,
			.gpio0  = 0xff01,
		},{
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 1,
			.gpio0  = 0xff02,
		},{
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = 2,
			.gpio0  = 0xff02,
		}},
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
		.name		= "Hauppauge WinTV-HVR1800",
		.porta		= CX23885_ANALOG_VIDEO,
		.portb		= CX23885_MPEG_ENCODER,
		.portc		= CX23885_MPEG_DVB,
		.tuner_type	= TUNER_PHILIPS_TDA8290,
		.tuner_addr	= 0x42, /* 0x84 >> 1 */
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN5_CH2 |
					CX25840_VIN2_CH1,
			.gpio0  = 0,
		},{
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN4_CH2 |
					CX25840_VIN6_CH1,
			.gpio0  = 0,
		},{
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   =	CX25840_VIN7_CH3 |
					CX25840_VIN4_CH2 |
					CX25840_VIN8_CH1 |
					CX25840_SVIDEO_ON,
			.gpio0  = 0,
		}},
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
		.name		= "Hauppauge WinTV-HVR1250",
		.portc		= CX23885_MPEG_DVB,
		.input          = {{
			.type   = CX23885_VMUX_TELEVISION,
			.vmux   = 0,
			.gpio0  = 0xff00,
		},{
			.type   = CX23885_VMUX_DEBUG,
			.vmux   = 0,
			.gpio0  = 0xff01,
		},{
			.type   = CX23885_VMUX_COMPOSITE1,
			.vmux   = 1,
			.gpio0  = 0xff02,
		},{
			.type   = CX23885_VMUX_SVIDEO,
			.vmux   = 2,
			.gpio0  = 0xff02,
		}},
	},
	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
		.name		= "DViCO FusionHDTV5 Express",
		.portb		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
		.name		= "Hauppauge WinTV-HVR1500Q",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
		.name		= "Hauppauge WinTV-HVR1500",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
		.name		= "Hauppauge WinTV-HVR1200",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
		.name		= "Hauppauge WinTV-HVR1700",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
		.name		= "Hauppauge WinTV-HVR1400",
		.portc		= CX23885_MPEG_DVB,
	},
	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
		.name		= "DViCO FusionHDTV7 Dual Express",
		.portc		= CX23885_MPEG_DVB,
	},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);

/* ------------------------------------------------------------------ */
/* PCI subsystem IDs                                                  */

struct cx23885_subid cx23885_subids[] = {
	{
		.subvendor = 0x0070,
		.subdevice = 0x3400,
		.card      = CX23885_BOARD_UNKNOWN,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7600,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7800,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7801,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7809,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7911,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
	},{
		.subvendor = 0x18ac,
		.subdevice = 0xd500,
		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7790,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7797,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7710,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
	},{
		.subvendor = 0x0070,
		.subdevice = 0x7717,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x71d1,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x71d3,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8101,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8010,
		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
	},{
		.subvendor = 0x18ac,
		.subdevice = 0xd618,
		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
	},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);

void cx23885_card_list(struct cx23885_dev *dev)
{
	int i;

	if (0 == dev->pci->subsystem_vendor &&
	    0 == dev->pci->subsystem_device) {
		printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
		       "%s: be autodetected.  Please pass card=<n> insmod option to\n"
		       "%s: workaround that.  Redirect complaints to the vendor of\n"
		       "%s: the TV card.  Best regards,\n"
		       "%s:         -- tux\n",
		       dev->name, dev->name, dev->name, dev->name, dev->name);
	} else {
		printk("%s: Your board isn't known (yet) to the driver.  You can\n"
		       "%s: try to pick one of the existing card configs via\n"
		       "%s: card=<n> insmod option.  Updating to the latest\n"
		       "%s: version might help as well.\n",
		       dev->name, dev->name, dev->name, dev->name);
	}
	printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
	       dev->name);
	for (i = 0; i < cx23885_bcount; i++)
		printk("%s:    card=%d -> %s\n",
		       dev->name, i, cx23885_boards[i].name);
}

static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
{
	struct tveeprom tv;

	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);

	/* Make sure we support the board model */
	switch (tv.model)
	{
	case 71009:
		/* WinTV-HVR1200 (PCIe, Retail, full height)
		 * DVB-T and basic analog */
	case 71359:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71439:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71449:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71939:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71949:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71959:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 71979:
		/* WinTV-HVR1200 (PCIe, OEM, half height)
		 * DVB-T and basic analog */
	case 71999:
		/* WinTV-HVR1200 (PCIe, OEM, full height)
		 * DVB-T and basic analog */
	case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
	case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
	case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
	case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
	case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
	case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
	case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
	case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
	case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
	case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
	case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
	case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
	case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
	case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
	case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
	case 80019:
		/* WinTV-HVR1400 (Express Card, Retail, IR,
		 * DVB-T and Basic analog */
	case 81509:
		/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
		 * DVB-T and MPEG2 HW Encoder */
	case 81519:
		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
		 * DVB-T and MPEG2 HW Encoder */
		break;
	default:
		printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
		break;
	}

	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
			dev->name, tv.model);
}

/* Tuner callback function for cx23885 boards. Currently only needed
 * for HVR1500Q, which has an xc5000 tuner.
 */
int cx23885_tuner_callback(void *priv, int command, int arg)
{
	struct cx23885_i2c *bus = priv;
	struct cx23885_dev *dev = bus->dev;

	switch(dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
		if(command == 0) {	/* Tuner Reset Command from xc5000 */
			/* Drive the tuner into reset and out */
			cx_clear(GP0_IO, 0x00000004);
			mdelay(200);
			cx_set(GP0_IO, 0x00000004);
			return 0;
		}
		else {
			printk(KERN_ERR
				"%s(): Unknow command.\n", __func__);
			return -EINVAL;
		}
		break;
	}

	return 0; /* Should never be here */
}

void cx23885_gpio_setup(struct cx23885_dev *dev)
{
	switch(dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
		/* GPIO-0 cx24227 demodulator reset */
		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
		/* GPIO-0 cx24227 demodulator */
		/* GPIO-2 xc3028 tuner */

		/* Put the parts into reset */
		cx_set(GP0_IO, 0x00050000);
		cx_clear(GP0_IO, 0x00000005);
		msleep(5);

		/* Bring the parts out of reset */
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
		/* GPIO-0 cx24227 demodulator reset */
		/* GPIO-2 xc5000 tuner reset */
		cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
		/* GPIO-0 656_CLK */
		/* GPIO-1 656_D0 */
		/* GPIO-2 8295A Reset */
		/* GPIO-3-10 cx23417 data0-7 */
		/* GPIO-11-14 cx23417 addr0-3 */
		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
		/* GPIO-19 IR_RX */

		/* CX23417 GPIO's */
		/* EIO15 Zilog Reset */
		/* EIO14 S5H1409/CX24227 Reset */

		/* Force the TDA8295A into reset and back */
		cx_set(GP0_IO, 0x00040004);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000004);
		mdelay(20);
		cx_set(GP0_IO, 0x00040004);
		mdelay(20);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
		/* GPIO-0 tda10048 demodulator reset */
		/* GPIO-2 tda18271 tuner reset */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
		/* GPIO-0 TDA10048 demodulator reset */
		/* GPIO-2 TDA8295A Reset */
		/* GPIO-3-10 cx23417 data0-7 */
		/* GPIO-11-14 cx23417 addr0-3 */
		/* GPIO-15-18 cx23417 READY, CS, RD, WR */

		/* The following GPIO's are on the interna AVCore (cx25840) */
		/* GPIO-19 IR_RX */
		/* GPIO-20 IR_TX 416/DVBT Select */
		/* GPIO-21 IIS DAT */
		/* GPIO-22 IIS WCLK */
		/* GPIO-23 IIS BCLK */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
		/* GPIO-0  Dibcom7000p demodulator reset */
		/* GPIO-2  xc3028L tuner reset */
		/* GPIO-13 LED */

		/* Put the parts into reset and back */
		cx_set(GP0_IO, 0x00050000);
		mdelay(20);
		cx_clear(GP0_IO, 0x00000005);
		mdelay(20);
		cx_set(GP0_IO, 0x00050005);
		break;
	}
}

int cx23885_ir_init(struct cx23885_dev *dev)
{
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
		/* FIXME: Implement me */
		break;
	}

	return 0;
}

void cx23885_card_setup(struct cx23885_dev *dev)
{
	struct cx23885_tsport *ts1 = &dev->ts1;
	struct cx23885_tsport *ts2 = &dev->ts2;

	static u8 eeprom[256];

	if (dev->i2c_bus[0].i2c_rc == 0) {
		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
		tveeprom_read(&dev->i2c_bus[0].i2c_client,
			      eeprom, sizeof(eeprom));
	}

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
		if (dev->i2c_bus[0].i2c_rc == 0)
			hauppauge_eeprom(dev, eeprom+0x80);
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
		if (dev->i2c_bus[0].i2c_rc == 0)
			hauppauge_eeprom(dev, eeprom+0xc0);
		break;
	}

	switch (dev->board) {
	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		/* break omitted intentionally */
	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
		/* Defaults for VID B - Analog encoder */
		/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
		ts1->gen_ctrl_val    = 0x10e;
		ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
		ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;

		/* APB_TSVALERR_POL (active low)*/
		ts1->vld_misc_val    = 0x2000;
		ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);

		/* Defaults for VID C */
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
		break;
	case CX23885_BOARD_HAUPPAUGE_HVR1250:
	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	case CX23885_BOARD_HAUPPAUGE_HVR1400:
	default:
		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	}

	/* Certain boards support analog, or require the avcore to be
	 * loaded, ensure this happens.
	 */
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	case CX23885_BOARD_HAUPPAUGE_HVR1700:
		request_module("cx25840");
		break;
	}
}

/* ------------------------------------------------------------------ */

/*
 * Local variables:
 * c-basic-offset: 8
 * End:
 * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
 */
Commit	Line	Data
d19770e5 ST	1	/*
	2	* Driver for the Conexant CX23885 PCIe bridge
	3	*
	4	* Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	*
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	20	*/
	21
	22	#include <linux/init.h>
	23	#include <linux/module.h>
	24	#include <linux/pci.h>
	25	#include <linux/delay.h>
7b888014	26	#include <media/cx25840.h>
d19770e5 ST	27
	28	#include "cx23885.h"
	29
	30	/* ------------------------------------------------------------------ */
	31	/* board config info */
	32
	33	struct cx23885_board cx23885_boards[] = {
	34	[CX23885_BOARD_UNKNOWN] = {
	35	.name = "UNKNOWN/GENERIC",
c7712613 ST	36	/* Ensure safe default for unknown boards */
c7712613 ST	37	.clk_freq = 0,
d19770e5 ST	38	.input = {{
	39	.type = CX23885_VMUX_COMPOSITE1,
	40	.vmux = 0,
	41	},{
	42	.type = CX23885_VMUX_COMPOSITE2,
	43	.vmux = 1,
	44	},{
	45	.type = CX23885_VMUX_COMPOSITE3,
	46	.vmux = 2,
	47	},{
	48	.type = CX23885_VMUX_COMPOSITE4,
	49	.vmux = 3,
	50	}},
	51	},
	52	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
	53	.name = "Hauppauge WinTV-HVR1800lp",
d19770e5 ST	54	.portc = CX23885_MPEG_DVB,
	55	.input = {{
	56	.type = CX23885_VMUX_TELEVISION,
	57	.vmux = 0,
	58	.gpio0 = 0xff00,
	59	},{
	60	.type = CX23885_VMUX_DEBUG,
	61	.vmux = 0,
	62	.gpio0 = 0xff01,
	63	},{
	64	.type = CX23885_VMUX_COMPOSITE1,
	65	.vmux = 1,
	66	.gpio0 = 0xff02,
	67	},{
	68	.type = CX23885_VMUX_SVIDEO,
	69	.vmux = 2,
	70	.gpio0 = 0xff02,
	71	}},
	72	},
	73	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
	74	.name = "Hauppauge WinTV-HVR1800",
7b888014	75	.porta = CX23885_ANALOG_VIDEO,
a589b665	76	.portb = CX23885_MPEG_ENCODER,
d19770e5	77	.portc = CX23885_MPEG_DVB,
7b888014 ST	78	.tuner_type = TUNER_PHILIPS_TDA8290,
7b888014 ST	79	.tuner_addr = 0x42, /* 0x84 >> 1 */
d19770e5 ST	80	.input = {{
d19770e5 ST	81	.type = CX23885_VMUX_TELEVISION,
7b888014 ST	82	.vmux = CX25840_VIN7_CH3 \|
	83	CX25840_VIN5_CH2 \|
	84	CX25840_VIN2_CH1,
	85	.gpio0 = 0,
d19770e5 ST	86	},{
d19770e5 ST	87	.type = CX23885_VMUX_COMPOSITE1,
7b888014 ST	88	.vmux = CX25840_VIN7_CH3 \|
	89	CX25840_VIN4_CH2 \|
	90	CX25840_VIN6_CH1,
	91	.gpio0 = 0,
d19770e5 ST	92	},{
d19770e5 ST	93	.type = CX23885_VMUX_SVIDEO,
7b888014 ST	94	.vmux = CX25840_VIN7_CH3 \|
	95	CX25840_VIN4_CH2 \|
	96	CX25840_VIN8_CH1 \|
	97	CX25840_SVIDEO_ON,
	98	.gpio0 = 0,
d19770e5 ST	99	}},
d19770e5 ST	100	},
a77743bc ST	101	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
	102	.name = "Hauppauge WinTV-HVR1250",
	103	.portc = CX23885_MPEG_DVB,
	104	.input = {{
	105	.type = CX23885_VMUX_TELEVISION,
	106	.vmux = 0,
	107	.gpio0 = 0xff00,
	108	},{
	109	.type = CX23885_VMUX_DEBUG,
	110	.vmux = 0,
	111	.gpio0 = 0xff01,
	112	},{
	113	.type = CX23885_VMUX_COMPOSITE1,
	114	.vmux = 1,
	115	.gpio0 = 0xff02,
	116	},{
	117	.type = CX23885_VMUX_SVIDEO,
	118	.vmux = 2,
	119	.gpio0 = 0xff02,
	120	}},
	121	},
9bc37caa MK	122	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
9bc37caa MK	123	.name = "DViCO FusionHDTV5 Express",
a6a3f140	124	.portb = CX23885_MPEG_DVB,
9bc37caa	125	},
d1987d55 ST	126	[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
	127	.name = "Hauppauge WinTV-HVR1500Q",
	128	.portc = CX23885_MPEG_DVB,
	129	},
07b4a835 MK	130	[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
	131	.name = "Hauppauge WinTV-HVR1500",
	132	.portc = CX23885_MPEG_DVB,
	133	},
b3ea0166 ST	134	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
	135	.name = "Hauppauge WinTV-HVR1200",
	136	.portc = CX23885_MPEG_DVB,
	137	},
a780a31c ST	138	[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
	139	.name = "Hauppauge WinTV-HVR1700",
	140	.portc = CX23885_MPEG_DVB,
	141	},
66762373 ST	142	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
	143	.name = "Hauppauge WinTV-HVR1400",
	144	.portc = CX23885_MPEG_DVB,
	145	},
335377b7 MK	146	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
	147	.name = "DViCO FusionHDTV7 Dual Express",
	148	.portc = CX23885_MPEG_DVB,
	149	},
d19770e5 ST	150	};
	151	const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
	152
	153	/* ------------------------------------------------------------------ */
	154	/* PCI subsystem IDs */
	155
	156	struct cx23885_subid cx23885_subids[] = {
	157	{
	158	.subvendor = 0x0070,
	159	.subdevice = 0x3400,
	160	.card = CX23885_BOARD_UNKNOWN,
	161	},{
	162	.subvendor = 0x0070,
	163	.subdevice = 0x7600,
	164	.card = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
	165	},{
	166	.subvendor = 0x0070,
	167	.subdevice = 0x7800,
	168	.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
	169	},{
	170	.subvendor = 0x0070,
	171	.subdevice = 0x7801,
	172	.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
6ccb8cfb MK	173	},{
	174	.subvendor = 0x0070,
	175	.subdevice = 0x7809,
	176	.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
a77743bc ST	177	},{
	178	.subvendor = 0x0070,
	179	.subdevice = 0x7911,
	180	.card = CX23885_BOARD_HAUPPAUGE_HVR1250,
9bc37caa MK	181	},{
	182	.subvendor = 0x18ac,
	183	.subdevice = 0xd500,
	184	.card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
b00fff0b MK	185	},{
	186	.subvendor = 0x0070,
	187	.subdevice = 0x7790,
	188	.card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
d1987d55 ST	189	},{
	190	.subvendor = 0x0070,
	191	.subdevice = 0x7797,
	192	.card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
b00fff0b MK	193	},{
	194	.subvendor = 0x0070,
	195	.subdevice = 0x7710,
	196	.card = CX23885_BOARD_HAUPPAUGE_HVR1500,
07b4a835 MK	197	},{
	198	.subvendor = 0x0070,
	199	.subdevice = 0x7717,
	200	.card = CX23885_BOARD_HAUPPAUGE_HVR1500,
b3ea0166 ST	201	}, {
	202	.subvendor = 0x0070,
	203	.subdevice = 0x71d1,
	204	.card = CX23885_BOARD_HAUPPAUGE_HVR1200,
3c3852cd MK	205	}, {
	206	.subvendor = 0x0070,
	207	.subdevice = 0x71d3,
	208	.card = CX23885_BOARD_HAUPPAUGE_HVR1200,
a780a31c ST	209	}, {
	210	.subvendor = 0x0070,
	211	.subdevice = 0x8101,
	212	.card = CX23885_BOARD_HAUPPAUGE_HVR1700,
66762373 ST	213	}, {
	214	.subvendor = 0x0070,
	215	.subdevice = 0x8010,
	216	.card = CX23885_BOARD_HAUPPAUGE_HVR1400,
335377b7 MK	217	},{
	218	.subvendor = 0x18ac,
	219	.subdevice = 0xd618,
	220	.card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
d19770e5 ST	221	},
	222	};
	223	const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
	224
	225	void cx23885_card_list(struct cx23885_dev *dev)
	226	{
	227	int i;
	228
	229	if (0 == dev->pci->subsystem_vendor &&
	230	0 == dev->pci->subsystem_device) {
	231	printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
	232	"%s: be autodetected. Please pass card=<n> insmod option to\n"
	233	"%s: workaround that. Redirect complaints to the vendor of\n"
	234	"%s: the TV card. Best regards,\n"
	235	"%s: -- tux\n",
	236	dev->name, dev->name, dev->name, dev->name, dev->name);
	237	} else {
	238	printk("%s: Your board isn't known (yet) to the driver. You can\n"
	239	"%s: try to pick one of the existing card configs via\n"
	240	"%s: card=<n> insmod option. Updating to the latest\n"
	241	"%s: version might help as well.\n",
	242	dev->name, dev->name, dev->name, dev->name);
	243	}
	244	printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
	245	dev->name);
	246	for (i = 0; i < cx23885_bcount; i++)
	247	printk("%s: card=%d -> %s\n",
	248	dev->name, i, cx23885_boards[i].name);
	249	}
	250
	251	static void hauppauge_eeprom(struct cx23885_dev dev, u8 eeprom_data)
	252	{
	253	struct tveeprom tv;
	254
	255	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
	256
d19770e5 ST	257	/* Make sure we support the board model */
	258	switch (tv.model)
	259	{
36396c89 MK	260	case 71009:
	261	/* WinTV-HVR1200 (PCIe, Retail, full height)
	262	* DVB-T and basic analog */
	263	case 71359:
	264	/* WinTV-HVR1200 (PCIe, OEM, half height)
	265	* DVB-T and basic analog */
	266	case 71439:
	267	/* WinTV-HVR1200 (PCIe, OEM, half height)
	268	* DVB-T and basic analog */
	269	case 71449:
	270	/* WinTV-HVR1200 (PCIe, OEM, full height)
	271	* DVB-T and basic analog */
	272	case 71939:
	273	/* WinTV-HVR1200 (PCIe, OEM, half height)
	274	* DVB-T and basic analog */
	275	case 71949:
	276	/* WinTV-HVR1200 (PCIe, OEM, full height)
	277	* DVB-T and basic analog */
	278	case 71959:
	279	/* WinTV-HVR1200 (PCIe, OEM, full height)
	280	* DVB-T and basic analog */
	281	case 71979:
	282	/* WinTV-HVR1200 (PCIe, OEM, half height)
	283	* DVB-T and basic analog */
	284	case 71999:
	285	/* WinTV-HVR1200 (PCIe, OEM, full height)
	286	* DVB-T and basic analog */
d19770e5	287	case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
29a7b4cb MK	288	case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
	289	case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
	290	case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
	291	case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
6a0a962c MK	292	case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
	293	case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
	294	case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
	295	case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
	296	case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
68370cf9 MK	297	case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
68370cf9 MK	298	case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
4b15b5ec	299	case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
68370cf9 MK	300	case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
68370cf9 MK	301	case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
66762373 ST	302	case 80019:
	303	/* WinTV-HVR1400 (Express Card, Retail, IR,
	304	* DVB-T and Basic analog */
36396c89 MK	305	case 81509:
	306	/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
	307	* DVB-T and MPEG2 HW Encoder */
a780a31c	308	case 81519:
36396c89	309	/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
a780a31c	310	* DVB-T and MPEG2 HW Encoder */
d19770e5 ST	311	break;
	312	default:
	313	printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
	314	break;
	315	}
	316
	317	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
	318	dev->name, tv.model);
	319	}
	320
8c70017f ST	321	/* Tuner callback function for cx23885 boards. Currently only needed
	322	* for HVR1500Q, which has an xc5000 tuner.
	323	*/
73c993a8	324	int cx23885_tuner_callback(void *priv, int command, int arg)
8c70017f	325	{
73c993a8	326	struct cx23885_i2c *bus = priv;
8c70017f ST	327	struct cx23885_dev *dev = bus->dev;
	328
	329	switch(dev->board) {
	330	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	331	if(command == 0) { /* Tuner Reset Command from xc5000 */
	332	/* Drive the tuner into reset and out */
	333	cx_clear(GP0_IO, 0x00000004);
	334	mdelay(200);
	335	cx_set(GP0_IO, 0x00000004);
	336	return 0;
	337	}
	338	else {
	339	printk(KERN_ERR
22b4e64f	340	"%s(): Unknow command.\n", __func__);
8c70017f ST	341	return -EINVAL;
	342	}
	343	break;
	344	}
	345
	346	return 0; /* Should never be here */
	347	}
73c993a8	348
a6a3f140 ST	349	void cx23885_gpio_setup(struct cx23885_dev *dev)
	350	{
	351	switch(dev->board) {
	352	case CX23885_BOARD_HAUPPAUGE_HVR1250:
	353	/* GPIO-0 cx24227 demodulator reset */
	354	cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
	355	break;
07b4a835 MK	356	case CX23885_BOARD_HAUPPAUGE_HVR1500:
	357	/* GPIO-0 cx24227 demodulator */
	358	/* GPIO-2 xc3028 tuner */
	359
	360	/* Put the parts into reset */
	361	cx_set(GP0_IO, 0x00050000);
	362	cx_clear(GP0_IO, 0x00000005);
	363	msleep(5);
	364
	365	/* Bring the parts out of reset */
	366	cx_set(GP0_IO, 0x00050005);
	367	break;
d1987d55 ST	368	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
	369	/* GPIO-0 cx24227 demodulator reset */
	370	/* GPIO-2 xc5000 tuner reset */
	371	cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
	372	break;
a6a3f140 ST	373	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	374	/* GPIO-0 656_CLK */
	375	/* GPIO-1 656_D0 */
	376	/* GPIO-2 8295A Reset */
	377	/* GPIO-3-10 cx23417 data0-7 */
	378	/* GPIO-11-14 cx23417 addr0-3 */
	379	/* GPIO-15-18 cx23417 READY, CS, RD, WR */
	380	/* GPIO-19 IR_RX */
3ba71d21	381
a589b665 ST	382	/* CX23417 GPIO's */
	383	/* EIO15 Zilog Reset */
	384	/* EIO14 S5H1409/CX24227 Reset */
	385
5206d6ec ST	386	/* Force the TDA8295A into reset and back */
	387	cx_set(GP0_IO, 0x00040004);
	388	mdelay(20);
	389	cx_clear(GP0_IO, 0x00000004);
	390	mdelay(20);
	391	cx_set(GP0_IO, 0x00040004);
	392	mdelay(20);
a6a3f140	393	break;
b3ea0166 ST	394	case CX23885_BOARD_HAUPPAUGE_HVR1200:
	395	/* GPIO-0 tda10048 demodulator reset */
	396	/* GPIO-2 tda18271 tuner reset */
	397
a780a31c ST	398	/* Put the parts into reset and back */
	399	cx_set(GP0_IO, 0x00050000);
	400	mdelay(20);
	401	cx_clear(GP0_IO, 0x00000005);
	402	mdelay(20);
	403	cx_set(GP0_IO, 0x00050005);
	404	break;
	405	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	406	/* GPIO-0 TDA10048 demodulator reset */
	407	/* GPIO-2 TDA8295A Reset */
	408	/* GPIO-3-10 cx23417 data0-7 */
	409	/* GPIO-11-14 cx23417 addr0-3 */
	410	/* GPIO-15-18 cx23417 READY, CS, RD, WR */
	411
	412	/* The following GPIO's are on the interna AVCore (cx25840) */
	413	/* GPIO-19 IR_RX */
	414	/* GPIO-20 IR_TX 416/DVBT Select */
	415	/* GPIO-21 IIS DAT */
	416	/* GPIO-22 IIS WCLK */
	417	/* GPIO-23 IIS BCLK */
	418
66762373 ST	419	/* Put the parts into reset and back */
	420	cx_set(GP0_IO, 0x00050000);
	421	mdelay(20);
	422	cx_clear(GP0_IO, 0x00000005);
	423	mdelay(20);
	424	cx_set(GP0_IO, 0x00050005);
	425	break;
	426	case CX23885_BOARD_HAUPPAUGE_HVR1400:
	427	/* GPIO-0 Dibcom7000p demodulator reset */
	428	/* GPIO-2 xc3028L tuner reset */
	429	/* GPIO-13 LED */
	430
b3ea0166 ST	431	/* Put the parts into reset and back */
	432	cx_set(GP0_IO, 0x00050000);
	433	mdelay(20);
	434	cx_clear(GP0_IO, 0x00000005);
	435	mdelay(20);
	436	cx_set(GP0_IO, 0x00050005);
	437	break;
a6a3f140 ST	438	}
	439	}
	440
	441	int cx23885_ir_init(struct cx23885_dev *dev)
	442	{
	443	switch (dev->board) {
	444	case CX23885_BOARD_HAUPPAUGE_HVR1250:
07b4a835	445	case CX23885_BOARD_HAUPPAUGE_HVR1500:
d1987d55	446	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
a6a3f140	447	case CX23885_BOARD_HAUPPAUGE_HVR1800:
b3ea0166	448	case CX23885_BOARD_HAUPPAUGE_HVR1200:
66762373	449	case CX23885_BOARD_HAUPPAUGE_HVR1400:
a6a3f140 ST	450	/* FIXME: Implement me */
	451	break;
	452	}
	453
	454	return 0;
	455	}
	456
d19770e5 ST	457	void cx23885_card_setup(struct cx23885_dev *dev)
d19770e5 ST	458	{
a6a3f140 ST	459	struct cx23885_tsport *ts1 = &dev->ts1;
	460	struct cx23885_tsport *ts2 = &dev->ts2;
	461
d19770e5 ST	462	static u8 eeprom[256];
	463
	464	if (dev->i2c_bus[0].i2c_rc == 0) {
	465	dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
44a6481d MK	466	tveeprom_read(&dev->i2c_bus[0].i2c_client,
44a6481d MK	467	eeprom, sizeof(eeprom));
d19770e5 ST	468	}
	469
	470	switch (dev->board) {
a77743bc	471	case CX23885_BOARD_HAUPPAUGE_HVR1250:
07b4a835	472	case CX23885_BOARD_HAUPPAUGE_HVR1500:
d1987d55	473	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
66762373	474	case CX23885_BOARD_HAUPPAUGE_HVR1400:
c88133ec ST	475	if (dev->i2c_bus[0].i2c_rc == 0)
	476	hauppauge_eeprom(dev, eeprom+0x80);
	477	break;
d19770e5 ST	478	case CX23885_BOARD_HAUPPAUGE_HVR1800:
d19770e5 ST	479	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
b3ea0166	480	case CX23885_BOARD_HAUPPAUGE_HVR1200:
a780a31c	481	case CX23885_BOARD_HAUPPAUGE_HVR1700:
d19770e5	482	if (dev->i2c_bus[0].i2c_rc == 0)
c88133ec	483	hauppauge_eeprom(dev, eeprom+0xc0);
d19770e5 ST	484	break;
d19770e5 ST	485	}
a6a3f140 ST	486
a6a3f140 ST	487	switch (dev->board) {
335377b7 MK	488	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
	489	ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
	490	ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
	491	ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	492	/* break omitted intentionally */
a6a3f140 ST	493	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
	494	ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
	495	ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
	496	ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	497	break;
a589b665 ST	498	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	499	/* Defaults for VID B - Analog encoder */
	500	/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
	501	ts1->gen_ctrl_val = 0x10e;
	502	ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
	503	ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	504
	505	/* APB_TSVALERR_POL (active low)*/
	506	ts1->vld_misc_val = 0x2000;
	507	ts1->hw_sop_ctrl_val = (0x47 << 16 \| 188 << 4 \| 0xc);
	508
	509	/* Defaults for VID C */
	510	ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
	511	ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
	512	ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	513	break;
a6a3f140	514	case CX23885_BOARD_HAUPPAUGE_HVR1250:
07b4a835	515	case CX23885_BOARD_HAUPPAUGE_HVR1500:
d1987d55	516	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
a6a3f140	517	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
b3ea0166	518	case CX23885_BOARD_HAUPPAUGE_HVR1200:
a780a31c	519	case CX23885_BOARD_HAUPPAUGE_HVR1700:
66762373	520	case CX23885_BOARD_HAUPPAUGE_HVR1400:
a6a3f140 ST	521	default:
	522	ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
	523	ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
	524	ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
	525	}
	526
ce89cfb4 ST	527	/* Certain boards support analog, or require the avcore to be
	528	* loaded, ensure this happens.
	529	*/
	530	switch (dev->board) {
	531	case CX23885_BOARD_HAUPPAUGE_HVR1800:
	532	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
	533	case CX23885_BOARD_HAUPPAUGE_HVR1700:
	534	request_module("cx25840");
	535	break;
	536	}
d19770e5 ST	537	}
	538
	539	/* ------------------------------------------------------------------ */
	540
d19770e5 ST	541	/*
	542	* Local variables:
	543	* c-basic-offset: 8
	544	* End:
	545	* kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
	546	*/