Commit | Line | Data |
---|---|---|
3153ac9c AP |
1 | /* |
2 | * ov2640 Camera Driver | |
3 | * | |
4 | * Copyright (C) 2010 Alberto Panizzo <maramaopercheseimorto@gmail.com> | |
5 | * | |
6 | * Based on ov772x, ov9640 drivers and previous non merged implementations. | |
7 | * | |
8 | * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved. | |
9 | * Copyright (C) 2006, OmniVision | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as | |
13 | * published by the Free Software Foundation. | |
14 | */ | |
15 | ||
16 | #include <linux/init.h> | |
17 | #include <linux/module.h> | |
18 | #include <linux/i2c.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/delay.h> | |
4e65172f | 21 | #include <linux/gpio.h> |
d3633329 | 22 | #include <linux/gpio/consumer.h> |
4e65172f | 23 | #include <linux/of_gpio.h> |
95d20109 | 24 | #include <linux/v4l2-mediabus.h> |
3153ac9c | 25 | #include <linux/videodev2.h> |
d463003b | 26 | |
3153ac9c | 27 | #include <media/soc_camera.h> |
9aea470b | 28 | #include <media/v4l2-clk.h> |
d463003b | 29 | #include <media/v4l2-subdev.h> |
f026671d | 30 | #include <media/v4l2-ctrls.h> |
650b1815 | 31 | #include <media/v4l2-image-sizes.h> |
3153ac9c AP |
32 | |
33 | #define VAL_SET(x, mask, rshift, lshift) \ | |
34 | ((((x) >> rshift) & mask) << lshift) | |
35 | /* | |
36 | * DSP registers | |
37 | * register offset for BANK_SEL == BANK_SEL_DSP | |
38 | */ | |
39 | #define R_BYPASS 0x05 /* Bypass DSP */ | |
40 | #define R_BYPASS_DSP_BYPAS 0x01 /* Bypass DSP, sensor out directly */ | |
41 | #define R_BYPASS_USE_DSP 0x00 /* Use the internal DSP */ | |
42 | #define QS 0x44 /* Quantization Scale Factor */ | |
43 | #define CTRLI 0x50 | |
44 | #define CTRLI_LP_DP 0x80 | |
45 | #define CTRLI_ROUND 0x40 | |
46 | #define CTRLI_V_DIV_SET(x) VAL_SET(x, 0x3, 0, 3) | |
47 | #define CTRLI_H_DIV_SET(x) VAL_SET(x, 0x3, 0, 0) | |
48 | #define HSIZE 0x51 /* H_SIZE[7:0] (real/4) */ | |
49 | #define HSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0) | |
50 | #define VSIZE 0x52 /* V_SIZE[7:0] (real/4) */ | |
51 | #define VSIZE_SET(x) VAL_SET(x, 0xFF, 2, 0) | |
52 | #define XOFFL 0x53 /* OFFSET_X[7:0] */ | |
53 | #define XOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0) | |
54 | #define YOFFL 0x54 /* OFFSET_Y[7:0] */ | |
55 | #define YOFFL_SET(x) VAL_SET(x, 0xFF, 0, 0) | |
56 | #define VHYX 0x55 /* Offset and size completion */ | |
57 | #define VHYX_VSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 7) | |
58 | #define VHYX_HSIZE_SET(x) VAL_SET(x, 0x1, (8+2), 3) | |
59 | #define VHYX_YOFF_SET(x) VAL_SET(x, 0x3, 8, 4) | |
60 | #define VHYX_XOFF_SET(x) VAL_SET(x, 0x3, 8, 0) | |
61 | #define DPRP 0x56 | |
62 | #define TEST 0x57 /* Horizontal size completion */ | |
63 | #define TEST_HSIZE_SET(x) VAL_SET(x, 0x1, (9+2), 7) | |
64 | #define ZMOW 0x5A /* Zoom: Out Width OUTW[7:0] (real/4) */ | |
65 | #define ZMOW_OUTW_SET(x) VAL_SET(x, 0xFF, 2, 0) | |
66 | #define ZMOH 0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */ | |
67 | #define ZMOH_OUTH_SET(x) VAL_SET(x, 0xFF, 2, 0) | |
68 | #define ZMHH 0x5C /* Zoom: Speed and H&W completion */ | |
69 | #define ZMHH_ZSPEED_SET(x) VAL_SET(x, 0x0F, 0, 4) | |
70 | #define ZMHH_OUTH_SET(x) VAL_SET(x, 0x1, (8+2), 2) | |
71 | #define ZMHH_OUTW_SET(x) VAL_SET(x, 0x3, (8+2), 0) | |
72 | #define BPADDR 0x7C /* SDE Indirect Register Access: Address */ | |
73 | #define BPDATA 0x7D /* SDE Indirect Register Access: Data */ | |
74 | #define CTRL2 0x86 /* DSP Module enable 2 */ | |
75 | #define CTRL2_DCW_EN 0x20 | |
76 | #define CTRL2_SDE_EN 0x10 | |
77 | #define CTRL2_UV_ADJ_EN 0x08 | |
78 | #define CTRL2_UV_AVG_EN 0x04 | |
79 | #define CTRL2_CMX_EN 0x01 | |
80 | #define CTRL3 0x87 /* DSP Module enable 3 */ | |
81 | #define CTRL3_BPC_EN 0x80 | |
82 | #define CTRL3_WPC_EN 0x40 | |
83 | #define SIZEL 0x8C /* Image Size Completion */ | |
84 | #define SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6) | |
85 | #define SIZEL_HSIZE8_SET(x) VAL_SET(x, 0x7, 0, 3) | |
86 | #define SIZEL_VSIZE8_SET(x) VAL_SET(x, 0x7, 0, 0) | |
87 | #define HSIZE8 0xC0 /* Image Horizontal Size HSIZE[10:3] */ | |
88 | #define HSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0) | |
89 | #define VSIZE8 0xC1 /* Image Vertical Size VSIZE[10:3] */ | |
90 | #define VSIZE8_SET(x) VAL_SET(x, 0xFF, 3, 0) | |
91 | #define CTRL0 0xC2 /* DSP Module enable 0 */ | |
92 | #define CTRL0_AEC_EN 0x80 | |
93 | #define CTRL0_AEC_SEL 0x40 | |
94 | #define CTRL0_STAT_SEL 0x20 | |
95 | #define CTRL0_VFIRST 0x10 | |
96 | #define CTRL0_YUV422 0x08 | |
97 | #define CTRL0_YUV_EN 0x04 | |
98 | #define CTRL0_RGB_EN 0x02 | |
99 | #define CTRL0_RAW_EN 0x01 | |
100 | #define CTRL1 0xC3 /* DSP Module enable 1 */ | |
101 | #define CTRL1_CIP 0x80 | |
102 | #define CTRL1_DMY 0x40 | |
103 | #define CTRL1_RAW_GMA 0x20 | |
104 | #define CTRL1_DG 0x10 | |
105 | #define CTRL1_AWB 0x08 | |
106 | #define CTRL1_AWB_GAIN 0x04 | |
107 | #define CTRL1_LENC 0x02 | |
108 | #define CTRL1_PRE 0x01 | |
109 | #define R_DVP_SP 0xD3 /* DVP output speed control */ | |
110 | #define R_DVP_SP_AUTO_MODE 0x80 | |
111 | #define R_DVP_SP_DVP_MASK 0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0); | |
112 | * = sysclk (48)/(2*[6:0]) (RAW);*/ | |
113 | #define IMAGE_MODE 0xDA /* Image Output Format Select */ | |
114 | #define IMAGE_MODE_Y8_DVP_EN 0x40 | |
115 | #define IMAGE_MODE_JPEG_EN 0x10 | |
116 | #define IMAGE_MODE_YUV422 0x00 | |
117 | #define IMAGE_MODE_RAW10 0x04 /* (DVP) */ | |
118 | #define IMAGE_MODE_RGB565 0x08 | |
119 | #define IMAGE_MODE_HREF_VSYNC 0x02 /* HREF timing select in DVP JPEG output | |
120 | * mode (0 for HREF is same as sensor) */ | |
121 | #define IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP | |
122 | * 1: Low byte first UYVY (C2[4] =0) | |
123 | * VYUY (C2[4] =1) | |
124 | * 0: High byte first YUYV (C2[4]=0) | |
125 | * YVYU (C2[4] = 1) */ | |
126 | #define RESET 0xE0 /* Reset */ | |
127 | #define RESET_MICROC 0x40 | |
128 | #define RESET_SCCB 0x20 | |
129 | #define RESET_JPEG 0x10 | |
130 | #define RESET_DVP 0x04 | |
131 | #define RESET_IPU 0x02 | |
132 | #define RESET_CIF 0x01 | |
133 | #define REGED 0xED /* Register ED */ | |
134 | #define REGED_CLK_OUT_DIS 0x10 | |
135 | #define MS_SP 0xF0 /* SCCB Master Speed */ | |
136 | #define SS_ID 0xF7 /* SCCB Slave ID */ | |
137 | #define SS_CTRL 0xF8 /* SCCB Slave Control */ | |
138 | #define SS_CTRL_ADD_AUTO_INC 0x20 | |
139 | #define SS_CTRL_EN 0x08 | |
140 | #define SS_CTRL_DELAY_CLK 0x04 | |
141 | #define SS_CTRL_ACC_EN 0x02 | |
142 | #define SS_CTRL_SEN_PASS_THR 0x01 | |
143 | #define MC_BIST 0xF9 /* Microcontroller misc register */ | |
144 | #define MC_BIST_RESET 0x80 /* Microcontroller Reset */ | |
145 | #define MC_BIST_BOOT_ROM_SEL 0x40 | |
146 | #define MC_BIST_12KB_SEL 0x20 | |
147 | #define MC_BIST_12KB_MASK 0x30 | |
148 | #define MC_BIST_512KB_SEL 0x08 | |
149 | #define MC_BIST_512KB_MASK 0x0C | |
150 | #define MC_BIST_BUSY_BIT_R 0x02 | |
151 | #define MC_BIST_MC_RES_ONE_SH_W 0x02 | |
152 | #define MC_BIST_LAUNCH 0x01 | |
153 | #define BANK_SEL 0xFF /* Register Bank Select */ | |
154 | #define BANK_SEL_DSP 0x00 | |
155 | #define BANK_SEL_SENS 0x01 | |
156 | ||
157 | /* | |
158 | * Sensor registers | |
159 | * register offset for BANK_SEL == BANK_SEL_SENS | |
160 | */ | |
161 | #define GAIN 0x00 /* AGC - Gain control gain setting */ | |
162 | #define COM1 0x03 /* Common control 1 */ | |
163 | #define COM1_1_DUMMY_FR 0x40 | |
164 | #define COM1_3_DUMMY_FR 0x80 | |
165 | #define COM1_7_DUMMY_FR 0xC0 | |
166 | #define COM1_VWIN_LSB_UXGA 0x0F | |
167 | #define COM1_VWIN_LSB_SVGA 0x0A | |
168 | #define COM1_VWIN_LSB_CIF 0x06 | |
169 | #define REG04 0x04 /* Register 04 */ | |
170 | #define REG04_DEF 0x20 /* Always set */ | |
171 | #define REG04_HFLIP_IMG 0x80 /* Horizontal mirror image ON/OFF */ | |
172 | #define REG04_VFLIP_IMG 0x40 /* Vertical flip image ON/OFF */ | |
173 | #define REG04_VREF_EN 0x10 | |
174 | #define REG04_HREF_EN 0x08 | |
175 | #define REG04_AEC_SET(x) VAL_SET(x, 0x3, 0, 0) | |
176 | #define REG08 0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */ | |
177 | #define COM2 0x09 /* Common control 2 */ | |
178 | #define COM2_SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */ | |
179 | /* Output drive capability */ | |
180 | #define COM2_OCAP_Nx_SET(N) (((N) - 1) & 0x03) /* N = [1x .. 4x] */ | |
181 | #define PID 0x0A /* Product ID Number MSB */ | |
182 | #define VER 0x0B /* Product ID Number LSB */ | |
183 | #define COM3 0x0C /* Common control 3 */ | |
184 | #define COM3_BAND_50H 0x04 /* 0 For Banding at 60H */ | |
185 | #define COM3_BAND_AUTO 0x02 /* Auto Banding */ | |
186 | #define COM3_SING_FR_SNAPSH 0x01 /* 0 For enable live video output after the | |
187 | * snapshot sequence*/ | |
188 | #define AEC 0x10 /* AEC[9:2] Exposure Value */ | |
189 | #define CLKRC 0x11 /* Internal clock */ | |
190 | #define CLKRC_EN 0x80 | |
191 | #define CLKRC_DIV_SET(x) (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */ | |
192 | #define COM7 0x12 /* Common control 7 */ | |
193 | #define COM7_SRST 0x80 /* Initiates system reset. All registers are | |
194 | * set to factory default values after which | |
195 | * the chip resumes normal operation */ | |
196 | #define COM7_RES_UXGA 0x00 /* Resolution selectors for UXGA */ | |
197 | #define COM7_RES_SVGA 0x40 /* SVGA */ | |
198 | #define COM7_RES_CIF 0x20 /* CIF */ | |
199 | #define COM7_ZOOM_EN 0x04 /* Enable Zoom mode */ | |
200 | #define COM7_COLOR_BAR_TEST 0x02 /* Enable Color Bar Test Pattern */ | |
201 | #define COM8 0x13 /* Common control 8 */ | |
202 | #define COM8_DEF 0xC0 /* Banding filter ON/OFF */ | |
203 | #define COM8_BNDF_EN 0x20 /* Banding filter ON/OFF */ | |
204 | #define COM8_AGC_EN 0x04 /* AGC Auto/Manual control selection */ | |
205 | #define COM8_AEC_EN 0x01 /* Auto/Manual Exposure control */ | |
206 | #define COM9 0x14 /* Common control 9 | |
207 | * Automatic gain ceiling - maximum AGC value [7:5]*/ | |
208 | #define COM9_AGC_GAIN_2x 0x00 /* 000 : 2x */ | |
209 | #define COM9_AGC_GAIN_4x 0x20 /* 001 : 4x */ | |
210 | #define COM9_AGC_GAIN_8x 0x40 /* 010 : 8x */ | |
211 | #define COM9_AGC_GAIN_16x 0x60 /* 011 : 16x */ | |
212 | #define COM9_AGC_GAIN_32x 0x80 /* 100 : 32x */ | |
213 | #define COM9_AGC_GAIN_64x 0xA0 /* 101 : 64x */ | |
214 | #define COM9_AGC_GAIN_128x 0xC0 /* 110 : 128x */ | |
215 | #define COM10 0x15 /* Common control 10 */ | |
216 | #define COM10_PCLK_HREF 0x20 /* PCLK output qualified by HREF */ | |
217 | #define COM10_PCLK_RISE 0x10 /* Data is updated at the rising edge of | |
218 | * PCLK (user can latch data at the next | |
219 | * falling edge of PCLK). | |
220 | * 0 otherwise. */ | |
221 | #define COM10_HREF_INV 0x08 /* Invert HREF polarity: | |
222 | * HREF negative for valid data*/ | |
223 | #define COM10_VSINC_INV 0x02 /* Invert VSYNC polarity */ | |
224 | #define HSTART 0x17 /* Horizontal Window start MSB 8 bit */ | |
225 | #define HEND 0x18 /* Horizontal Window end MSB 8 bit */ | |
226 | #define VSTART 0x19 /* Vertical Window start MSB 8 bit */ | |
227 | #define VEND 0x1A /* Vertical Window end MSB 8 bit */ | |
228 | #define MIDH 0x1C /* Manufacturer ID byte - high */ | |
229 | #define MIDL 0x1D /* Manufacturer ID byte - low */ | |
230 | #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */ | |
231 | #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */ | |
232 | #define VV 0x26 /* AGC/AEC Fast mode operating region */ | |
233 | #define VV_HIGH_TH_SET(x) VAL_SET(x, 0xF, 0, 4) | |
234 | #define VV_LOW_TH_SET(x) VAL_SET(x, 0xF, 0, 0) | |
235 | #define REG2A 0x2A /* Dummy pixel insert MSB */ | |
236 | #define FRARL 0x2B /* Dummy pixel insert LSB */ | |
237 | #define ADDVFL 0x2D /* LSB of insert dummy lines in Vertical direction */ | |
238 | #define ADDVFH 0x2E /* MSB of insert dummy lines in Vertical direction */ | |
239 | #define YAVG 0x2F /* Y/G Channel Average value */ | |
240 | #define REG32 0x32 /* Common Control 32 */ | |
241 | #define REG32_PCLK_DIV_2 0x80 /* PCLK freq divided by 2 */ | |
242 | #define REG32_PCLK_DIV_4 0xC0 /* PCLK freq divided by 4 */ | |
243 | #define ARCOM2 0x34 /* Zoom: Horizontal start point */ | |
244 | #define REG45 0x45 /* Register 45 */ | |
245 | #define FLL 0x46 /* Frame Length Adjustment LSBs */ | |
246 | #define FLH 0x47 /* Frame Length Adjustment MSBs */ | |
247 | #define COM19 0x48 /* Zoom: Vertical start point */ | |
248 | #define ZOOMS 0x49 /* Zoom: Vertical start point */ | |
249 | #define COM22 0x4B /* Flash light control */ | |
250 | #define COM25 0x4E /* For Banding operations */ | |
251 | #define BD50 0x4F /* 50Hz Banding AEC 8 LSBs */ | |
252 | #define BD60 0x50 /* 60Hz Banding AEC 8 LSBs */ | |
253 | #define REG5D 0x5D /* AVGsel[7:0], 16-zone average weight option */ | |
254 | #define REG5E 0x5E /* AVGsel[15:8], 16-zone average weight option */ | |
255 | #define REG5F 0x5F /* AVGsel[23:16], 16-zone average weight option */ | |
256 | #define REG60 0x60 /* AVGsel[31:24], 16-zone average weight option */ | |
257 | #define HISTO_LOW 0x61 /* Histogram Algorithm Low Level */ | |
258 | #define HISTO_HIGH 0x62 /* Histogram Algorithm High Level */ | |
259 | ||
260 | /* | |
261 | * ID | |
262 | */ | |
263 | #define MANUFACTURER_ID 0x7FA2 | |
264 | #define PID_OV2640 0x2642 | |
265 | #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF)) | |
266 | ||
267 | /* | |
268 | * Struct | |
269 | */ | |
270 | struct regval_list { | |
271 | u8 reg_num; | |
272 | u8 value; | |
273 | }; | |
274 | ||
3153ac9c AP |
275 | struct ov2640_win_size { |
276 | char *name; | |
650b1815 JW |
277 | u32 width; |
278 | u32 height; | |
3153ac9c AP |
279 | const struct regval_list *regs; |
280 | }; | |
281 | ||
282 | ||
283 | struct ov2640_priv { | |
284 | struct v4l2_subdev subdev; | |
f026671d | 285 | struct v4l2_ctrl_handler hdl; |
f5fe58fd | 286 | u32 cfmt_code; |
9aea470b | 287 | struct v4l2_clk *clk; |
3153ac9c | 288 | const struct ov2640_win_size *win; |
4e65172f JW |
289 | |
290 | struct soc_camera_subdev_desc ssdd_dt; | |
291 | struct gpio_desc *resetb_gpio; | |
292 | struct gpio_desc *pwdn_gpio; | |
3153ac9c AP |
293 | }; |
294 | ||
295 | /* | |
296 | * Registers settings | |
297 | */ | |
298 | ||
299 | #define ENDMARKER { 0xff, 0xff } | |
300 | ||
301 | static const struct regval_list ov2640_init_regs[] = { | |
302 | { BANK_SEL, BANK_SEL_DSP }, | |
303 | { 0x2c, 0xff }, | |
304 | { 0x2e, 0xdf }, | |
305 | { BANK_SEL, BANK_SEL_SENS }, | |
306 | { 0x3c, 0x32 }, | |
307 | { CLKRC, CLKRC_DIV_SET(1) }, | |
308 | { COM2, COM2_OCAP_Nx_SET(3) }, | |
309 | { REG04, REG04_DEF | REG04_HREF_EN }, | |
310 | { COM8, COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN }, | |
311 | { COM9, COM9_AGC_GAIN_8x | 0x08}, | |
312 | { 0x2c, 0x0c }, | |
313 | { 0x33, 0x78 }, | |
314 | { 0x3a, 0x33 }, | |
315 | { 0x3b, 0xfb }, | |
316 | { 0x3e, 0x00 }, | |
317 | { 0x43, 0x11 }, | |
318 | { 0x16, 0x10 }, | |
319 | { 0x39, 0x02 }, | |
320 | { 0x35, 0x88 }, | |
321 | { 0x22, 0x0a }, | |
322 | { 0x37, 0x40 }, | |
323 | { 0x23, 0x00 }, | |
324 | { ARCOM2, 0xa0 }, | |
325 | { 0x06, 0x02 }, | |
326 | { 0x06, 0x88 }, | |
327 | { 0x07, 0xc0 }, | |
328 | { 0x0d, 0xb7 }, | |
329 | { 0x0e, 0x01 }, | |
330 | { 0x4c, 0x00 }, | |
331 | { 0x4a, 0x81 }, | |
332 | { 0x21, 0x99 }, | |
333 | { AEW, 0x40 }, | |
334 | { AEB, 0x38 }, | |
335 | { VV, VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) }, | |
336 | { 0x5c, 0x00 }, | |
337 | { 0x63, 0x00 }, | |
338 | { FLL, 0x22 }, | |
339 | { COM3, 0x38 | COM3_BAND_AUTO }, | |
340 | { REG5D, 0x55 }, | |
341 | { REG5E, 0x7d }, | |
342 | { REG5F, 0x7d }, | |
343 | { REG60, 0x55 }, | |
344 | { HISTO_LOW, 0x70 }, | |
345 | { HISTO_HIGH, 0x80 }, | |
346 | { 0x7c, 0x05 }, | |
347 | { 0x20, 0x80 }, | |
348 | { 0x28, 0x30 }, | |
349 | { 0x6c, 0x00 }, | |
350 | { 0x6d, 0x80 }, | |
351 | { 0x6e, 0x00 }, | |
352 | { 0x70, 0x02 }, | |
353 | { 0x71, 0x94 }, | |
354 | { 0x73, 0xc1 }, | |
355 | { 0x3d, 0x34 }, | |
356 | { COM7, COM7_RES_UXGA | COM7_ZOOM_EN }, | |
357 | { 0x5a, 0x57 }, | |
358 | { BD50, 0xbb }, | |
359 | { BD60, 0x9c }, | |
360 | { BANK_SEL, BANK_SEL_DSP }, | |
361 | { 0xe5, 0x7f }, | |
362 | { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL }, | |
363 | { 0x41, 0x24 }, | |
364 | { RESET, RESET_JPEG | RESET_DVP }, | |
365 | { 0x76, 0xff }, | |
366 | { 0x33, 0xa0 }, | |
367 | { 0x42, 0x20 }, | |
368 | { 0x43, 0x18 }, | |
369 | { 0x4c, 0x00 }, | |
370 | { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 }, | |
371 | { 0x88, 0x3f }, | |
372 | { 0xd7, 0x03 }, | |
373 | { 0xd9, 0x10 }, | |
374 | { R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 }, | |
375 | { 0xc8, 0x08 }, | |
376 | { 0xc9, 0x80 }, | |
377 | { BPADDR, 0x00 }, | |
378 | { BPDATA, 0x00 }, | |
379 | { BPADDR, 0x03 }, | |
380 | { BPDATA, 0x48 }, | |
381 | { BPDATA, 0x48 }, | |
382 | { BPADDR, 0x08 }, | |
383 | { BPDATA, 0x20 }, | |
384 | { BPDATA, 0x10 }, | |
385 | { BPDATA, 0x0e }, | |
386 | { 0x90, 0x00 }, | |
387 | { 0x91, 0x0e }, | |
388 | { 0x91, 0x1a }, | |
389 | { 0x91, 0x31 }, | |
390 | { 0x91, 0x5a }, | |
391 | { 0x91, 0x69 }, | |
392 | { 0x91, 0x75 }, | |
393 | { 0x91, 0x7e }, | |
394 | { 0x91, 0x88 }, | |
395 | { 0x91, 0x8f }, | |
396 | { 0x91, 0x96 }, | |
397 | { 0x91, 0xa3 }, | |
398 | { 0x91, 0xaf }, | |
399 | { 0x91, 0xc4 }, | |
400 | { 0x91, 0xd7 }, | |
401 | { 0x91, 0xe8 }, | |
402 | { 0x91, 0x20 }, | |
403 | { 0x92, 0x00 }, | |
404 | { 0x93, 0x06 }, | |
405 | { 0x93, 0xe3 }, | |
406 | { 0x93, 0x03 }, | |
407 | { 0x93, 0x03 }, | |
408 | { 0x93, 0x00 }, | |
409 | { 0x93, 0x02 }, | |
410 | { 0x93, 0x00 }, | |
411 | { 0x93, 0x00 }, | |
412 | { 0x93, 0x00 }, | |
413 | { 0x93, 0x00 }, | |
414 | { 0x93, 0x00 }, | |
415 | { 0x93, 0x00 }, | |
416 | { 0x93, 0x00 }, | |
417 | { 0x96, 0x00 }, | |
418 | { 0x97, 0x08 }, | |
419 | { 0x97, 0x19 }, | |
420 | { 0x97, 0x02 }, | |
421 | { 0x97, 0x0c }, | |
422 | { 0x97, 0x24 }, | |
423 | { 0x97, 0x30 }, | |
424 | { 0x97, 0x28 }, | |
425 | { 0x97, 0x26 }, | |
426 | { 0x97, 0x02 }, | |
427 | { 0x97, 0x98 }, | |
428 | { 0x97, 0x80 }, | |
429 | { 0x97, 0x00 }, | |
430 | { 0x97, 0x00 }, | |
431 | { 0xa4, 0x00 }, | |
432 | { 0xa8, 0x00 }, | |
433 | { 0xc5, 0x11 }, | |
434 | { 0xc6, 0x51 }, | |
435 | { 0xbf, 0x80 }, | |
436 | { 0xc7, 0x10 }, | |
437 | { 0xb6, 0x66 }, | |
438 | { 0xb8, 0xA5 }, | |
439 | { 0xb7, 0x64 }, | |
440 | { 0xb9, 0x7C }, | |
441 | { 0xb3, 0xaf }, | |
442 | { 0xb4, 0x97 }, | |
443 | { 0xb5, 0xFF }, | |
444 | { 0xb0, 0xC5 }, | |
445 | { 0xb1, 0x94 }, | |
446 | { 0xb2, 0x0f }, | |
447 | { 0xc4, 0x5c }, | |
448 | { 0xa6, 0x00 }, | |
449 | { 0xa7, 0x20 }, | |
450 | { 0xa7, 0xd8 }, | |
451 | { 0xa7, 0x1b }, | |
452 | { 0xa7, 0x31 }, | |
453 | { 0xa7, 0x00 }, | |
454 | { 0xa7, 0x18 }, | |
455 | { 0xa7, 0x20 }, | |
456 | { 0xa7, 0xd8 }, | |
457 | { 0xa7, 0x19 }, | |
458 | { 0xa7, 0x31 }, | |
459 | { 0xa7, 0x00 }, | |
460 | { 0xa7, 0x18 }, | |
461 | { 0xa7, 0x20 }, | |
462 | { 0xa7, 0xd8 }, | |
463 | { 0xa7, 0x19 }, | |
464 | { 0xa7, 0x31 }, | |
465 | { 0xa7, 0x00 }, | |
466 | { 0xa7, 0x18 }, | |
467 | { 0x7f, 0x00 }, | |
468 | { 0xe5, 0x1f }, | |
469 | { 0xe1, 0x77 }, | |
470 | { 0xdd, 0x7f }, | |
471 | { CTRL0, CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN }, | |
472 | ENDMARKER, | |
473 | }; | |
474 | ||
475 | /* | |
476 | * Register settings for window size | |
477 | * The preamble, setup the internal DSP to input an UXGA (1600x1200) image. | |
478 | * Then the different zooming configurations will setup the output image size. | |
479 | */ | |
480 | static const struct regval_list ov2640_size_change_preamble_regs[] = { | |
481 | { BANK_SEL, BANK_SEL_DSP }, | |
482 | { RESET, RESET_DVP }, | |
650b1815 JW |
483 | { HSIZE8, HSIZE8_SET(UXGA_WIDTH) }, |
484 | { VSIZE8, VSIZE8_SET(UXGA_HEIGHT) }, | |
3153ac9c AP |
485 | { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN | |
486 | CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN }, | |
650b1815 JW |
487 | { HSIZE, HSIZE_SET(UXGA_WIDTH) }, |
488 | { VSIZE, VSIZE_SET(UXGA_HEIGHT) }, | |
3153ac9c AP |
489 | { XOFFL, XOFFL_SET(0) }, |
490 | { YOFFL, YOFFL_SET(0) }, | |
650b1815 | 491 | { VHYX, VHYX_HSIZE_SET(UXGA_WIDTH) | VHYX_VSIZE_SET(UXGA_HEIGHT) | |
3153ac9c | 492 | VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)}, |
650b1815 | 493 | { TEST, TEST_HSIZE_SET(UXGA_WIDTH) }, |
3153ac9c AP |
494 | ENDMARKER, |
495 | }; | |
496 | ||
497 | #define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div) \ | |
498 | { CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) | \ | |
499 | CTRLI_H_DIV_SET(h_div)}, \ | |
500 | { ZMOW, ZMOW_OUTW_SET(x) }, \ | |
501 | { ZMOH, ZMOH_OUTH_SET(y) }, \ | |
502 | { ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) }, \ | |
503 | { R_DVP_SP, pclk_div }, \ | |
504 | { RESET, 0x00} | |
505 | ||
506 | static const struct regval_list ov2640_qcif_regs[] = { | |
650b1815 | 507 | PER_SIZE_REG_SEQ(QCIF_WIDTH, QCIF_HEIGHT, 3, 3, 4), |
3153ac9c AP |
508 | ENDMARKER, |
509 | }; | |
510 | ||
511 | static const struct regval_list ov2640_qvga_regs[] = { | |
650b1815 | 512 | PER_SIZE_REG_SEQ(QVGA_WIDTH, QVGA_HEIGHT, 2, 2, 4), |
3153ac9c AP |
513 | ENDMARKER, |
514 | }; | |
515 | ||
516 | static const struct regval_list ov2640_cif_regs[] = { | |
650b1815 | 517 | PER_SIZE_REG_SEQ(CIF_WIDTH, CIF_HEIGHT, 2, 2, 8), |
3153ac9c AP |
518 | ENDMARKER, |
519 | }; | |
520 | ||
521 | static const struct regval_list ov2640_vga_regs[] = { | |
650b1815 | 522 | PER_SIZE_REG_SEQ(VGA_WIDTH, VGA_HEIGHT, 0, 0, 2), |
3153ac9c AP |
523 | ENDMARKER, |
524 | }; | |
525 | ||
526 | static const struct regval_list ov2640_svga_regs[] = { | |
650b1815 | 527 | PER_SIZE_REG_SEQ(SVGA_WIDTH, SVGA_HEIGHT, 1, 1, 2), |
3153ac9c AP |
528 | ENDMARKER, |
529 | }; | |
530 | ||
531 | static const struct regval_list ov2640_xga_regs[] = { | |
650b1815 | 532 | PER_SIZE_REG_SEQ(XGA_WIDTH, XGA_HEIGHT, 0, 0, 2), |
3153ac9c AP |
533 | { CTRLI, 0x00}, |
534 | ENDMARKER, | |
535 | }; | |
536 | ||
537 | static const struct regval_list ov2640_sxga_regs[] = { | |
650b1815 | 538 | PER_SIZE_REG_SEQ(SXGA_WIDTH, SXGA_HEIGHT, 0, 0, 2), |
3153ac9c AP |
539 | { CTRLI, 0x00}, |
540 | { R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE }, | |
541 | ENDMARKER, | |
542 | }; | |
543 | ||
544 | static const struct regval_list ov2640_uxga_regs[] = { | |
650b1815 | 545 | PER_SIZE_REG_SEQ(UXGA_WIDTH, UXGA_HEIGHT, 0, 0, 0), |
3153ac9c AP |
546 | { CTRLI, 0x00}, |
547 | { R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE }, | |
548 | ENDMARKER, | |
549 | }; | |
550 | ||
551 | #define OV2640_SIZE(n, w, h, r) \ | |
552 | {.name = n, .width = w , .height = h, .regs = r } | |
553 | ||
554 | static const struct ov2640_win_size ov2640_supported_win_sizes[] = { | |
650b1815 JW |
555 | OV2640_SIZE("QCIF", QCIF_WIDTH, QCIF_HEIGHT, ov2640_qcif_regs), |
556 | OV2640_SIZE("QVGA", QVGA_WIDTH, QVGA_HEIGHT, ov2640_qvga_regs), | |
557 | OV2640_SIZE("CIF", CIF_WIDTH, CIF_HEIGHT, ov2640_cif_regs), | |
558 | OV2640_SIZE("VGA", VGA_WIDTH, VGA_HEIGHT, ov2640_vga_regs), | |
559 | OV2640_SIZE("SVGA", SVGA_WIDTH, SVGA_HEIGHT, ov2640_svga_regs), | |
560 | OV2640_SIZE("XGA", XGA_WIDTH, XGA_HEIGHT, ov2640_xga_regs), | |
561 | OV2640_SIZE("SXGA", SXGA_WIDTH, SXGA_HEIGHT, ov2640_sxga_regs), | |
562 | OV2640_SIZE("UXGA", UXGA_WIDTH, UXGA_HEIGHT, ov2640_uxga_regs), | |
3153ac9c AP |
563 | }; |
564 | ||
565 | /* | |
566 | * Register settings for pixel formats | |
567 | */ | |
568 | static const struct regval_list ov2640_format_change_preamble_regs[] = { | |
569 | { BANK_SEL, BANK_SEL_DSP }, | |
570 | { R_BYPASS, R_BYPASS_USE_DSP }, | |
571 | ENDMARKER, | |
572 | }; | |
573 | ||
d1a49eac FS |
574 | static const struct regval_list ov2640_yuyv_regs[] = { |
575 | { IMAGE_MODE, IMAGE_MODE_YUV422 }, | |
576 | { 0xd7, 0x03 }, | |
577 | { 0x33, 0xa0 }, | |
578 | { 0xe5, 0x1f }, | |
579 | { 0xe1, 0x67 }, | |
580 | { RESET, 0x00 }, | |
581 | { R_BYPASS, R_BYPASS_USE_DSP }, | |
582 | ENDMARKER, | |
583 | }; | |
584 | ||
585 | static const struct regval_list ov2640_uyvy_regs[] = { | |
3153ac9c | 586 | { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 }, |
d1a49eac | 587 | { 0xd7, 0x01 }, |
3153ac9c AP |
588 | { 0x33, 0xa0 }, |
589 | { 0xe1, 0x67 }, | |
590 | { RESET, 0x00 }, | |
591 | { R_BYPASS, R_BYPASS_USE_DSP }, | |
592 | ENDMARKER, | |
593 | }; | |
594 | ||
d1a49eac FS |
595 | static const struct regval_list ov2640_rgb565_be_regs[] = { |
596 | { IMAGE_MODE, IMAGE_MODE_RGB565 }, | |
597 | { 0xd7, 0x03 }, | |
598 | { RESET, 0x00 }, | |
599 | { R_BYPASS, R_BYPASS_USE_DSP }, | |
600 | ENDMARKER, | |
601 | }; | |
602 | ||
603 | static const struct regval_list ov2640_rgb565_le_regs[] = { | |
3153ac9c AP |
604 | { IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 }, |
605 | { 0xd7, 0x03 }, | |
606 | { RESET, 0x00 }, | |
607 | { R_BYPASS, R_BYPASS_USE_DSP }, | |
608 | ENDMARKER, | |
609 | }; | |
610 | ||
f5fe58fd BB |
611 | static u32 ov2640_codes[] = { |
612 | MEDIA_BUS_FMT_YUYV8_2X8, | |
613 | MEDIA_BUS_FMT_UYVY8_2X8, | |
614 | MEDIA_BUS_FMT_RGB565_2X8_BE, | |
615 | MEDIA_BUS_FMT_RGB565_2X8_LE, | |
3153ac9c AP |
616 | }; |
617 | ||
3153ac9c AP |
618 | /* |
619 | * General functions | |
620 | */ | |
621 | static struct ov2640_priv *to_ov2640(const struct i2c_client *client) | |
622 | { | |
623 | return container_of(i2c_get_clientdata(client), struct ov2640_priv, | |
624 | subdev); | |
625 | } | |
626 | ||
627 | static int ov2640_write_array(struct i2c_client *client, | |
628 | const struct regval_list *vals) | |
629 | { | |
630 | int ret; | |
631 | ||
632 | while ((vals->reg_num != 0xff) || (vals->value != 0xff)) { | |
633 | ret = i2c_smbus_write_byte_data(client, | |
634 | vals->reg_num, vals->value); | |
635 | dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x", | |
636 | vals->reg_num, vals->value); | |
637 | ||
638 | if (ret < 0) | |
639 | return ret; | |
640 | vals++; | |
641 | } | |
642 | return 0; | |
643 | } | |
644 | ||
645 | static int ov2640_mask_set(struct i2c_client *client, | |
646 | u8 reg, u8 mask, u8 set) | |
647 | { | |
648 | s32 val = i2c_smbus_read_byte_data(client, reg); | |
649 | if (val < 0) | |
650 | return val; | |
651 | ||
652 | val &= ~mask; | |
653 | val |= set & mask; | |
654 | ||
655 | dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val); | |
656 | ||
657 | return i2c_smbus_write_byte_data(client, reg, val); | |
658 | } | |
659 | ||
660 | static int ov2640_reset(struct i2c_client *client) | |
661 | { | |
662 | int ret; | |
663 | const struct regval_list reset_seq[] = { | |
664 | {BANK_SEL, BANK_SEL_SENS}, | |
665 | {COM7, COM7_SRST}, | |
666 | ENDMARKER, | |
667 | }; | |
668 | ||
669 | ret = ov2640_write_array(client, reset_seq); | |
670 | if (ret) | |
671 | goto err; | |
672 | ||
673 | msleep(5); | |
674 | err: | |
675 | dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret); | |
676 | return ret; | |
677 | } | |
678 | ||
679 | /* | |
680 | * soc_camera_ops functions | |
681 | */ | |
682 | static int ov2640_s_stream(struct v4l2_subdev *sd, int enable) | |
683 | { | |
684 | return 0; | |
685 | } | |
686 | ||
f026671d | 687 | static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl) |
3153ac9c | 688 | { |
f026671d HV |
689 | struct v4l2_subdev *sd = |
690 | &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev; | |
3153ac9c | 691 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
3153ac9c | 692 | u8 val; |
a52eb6c0 FS |
693 | int ret; |
694 | ||
695 | ret = i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS); | |
696 | if (ret < 0) | |
697 | return ret; | |
3153ac9c AP |
698 | |
699 | switch (ctrl->id) { | |
700 | case V4L2_CID_VFLIP: | |
f026671d HV |
701 | val = ctrl->val ? REG04_VFLIP_IMG : 0x00; |
702 | return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val); | |
3153ac9c | 703 | case V4L2_CID_HFLIP: |
f026671d HV |
704 | val = ctrl->val ? REG04_HFLIP_IMG : 0x00; |
705 | return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val); | |
3153ac9c AP |
706 | } |
707 | ||
f026671d | 708 | return -EINVAL; |
3153ac9c AP |
709 | } |
710 | ||
3153ac9c AP |
711 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
712 | static int ov2640_g_register(struct v4l2_subdev *sd, | |
713 | struct v4l2_dbg_register *reg) | |
714 | { | |
715 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
716 | int ret; | |
717 | ||
718 | reg->size = 1; | |
719 | if (reg->reg > 0xff) | |
720 | return -EINVAL; | |
721 | ||
722 | ret = i2c_smbus_read_byte_data(client, reg->reg); | |
723 | if (ret < 0) | |
724 | return ret; | |
725 | ||
726 | reg->val = ret; | |
727 | ||
728 | return 0; | |
729 | } | |
730 | ||
731 | static int ov2640_s_register(struct v4l2_subdev *sd, | |
977ba3b1 | 732 | const struct v4l2_dbg_register *reg) |
3153ac9c AP |
733 | { |
734 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
735 | ||
736 | if (reg->reg > 0xff || | |
737 | reg->val > 0xff) | |
738 | return -EINVAL; | |
739 | ||
740 | return i2c_smbus_write_byte_data(client, reg->reg, reg->val); | |
741 | } | |
742 | #endif | |
743 | ||
4ec10bac LP |
744 | static int ov2640_s_power(struct v4l2_subdev *sd, int on) |
745 | { | |
746 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
25a34811 | 747 | struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); |
9aea470b | 748 | struct ov2640_priv *priv = to_ov2640(client); |
4ec10bac | 749 | |
9aea470b | 750 | return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); |
4ec10bac LP |
751 | } |
752 | ||
3153ac9c AP |
753 | /* Select the nearest higher resolution for capture */ |
754 | static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height) | |
755 | { | |
756 | int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1; | |
757 | ||
758 | for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) { | |
759 | if (ov2640_supported_win_sizes[i].width >= *width && | |
760 | ov2640_supported_win_sizes[i].height >= *height) { | |
761 | *width = ov2640_supported_win_sizes[i].width; | |
762 | *height = ov2640_supported_win_sizes[i].height; | |
763 | return &ov2640_supported_win_sizes[i]; | |
764 | } | |
765 | } | |
766 | ||
767 | *width = ov2640_supported_win_sizes[default_size].width; | |
768 | *height = ov2640_supported_win_sizes[default_size].height; | |
769 | return &ov2640_supported_win_sizes[default_size]; | |
770 | } | |
771 | ||
772 | static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height, | |
f5fe58fd | 773 | u32 code) |
3153ac9c AP |
774 | { |
775 | struct ov2640_priv *priv = to_ov2640(client); | |
776 | const struct regval_list *selected_cfmt_regs; | |
777 | int ret; | |
778 | ||
779 | /* select win */ | |
780 | priv->win = ov2640_select_win(width, height); | |
781 | ||
782 | /* select format */ | |
783 | priv->cfmt_code = 0; | |
784 | switch (code) { | |
f5fe58fd | 785 | case MEDIA_BUS_FMT_RGB565_2X8_BE: |
d1a49eac FS |
786 | dev_dbg(&client->dev, "%s: Selected cfmt RGB565 BE", __func__); |
787 | selected_cfmt_regs = ov2640_rgb565_be_regs; | |
788 | break; | |
f5fe58fd | 789 | case MEDIA_BUS_FMT_RGB565_2X8_LE: |
d1a49eac FS |
790 | dev_dbg(&client->dev, "%s: Selected cfmt RGB565 LE", __func__); |
791 | selected_cfmt_regs = ov2640_rgb565_le_regs; | |
792 | break; | |
f5fe58fd | 793 | case MEDIA_BUS_FMT_YUYV8_2X8: |
d1a49eac FS |
794 | dev_dbg(&client->dev, "%s: Selected cfmt YUYV (YUV422)", __func__); |
795 | selected_cfmt_regs = ov2640_yuyv_regs; | |
3153ac9c AP |
796 | break; |
797 | default: | |
f5fe58fd | 798 | case MEDIA_BUS_FMT_UYVY8_2X8: |
d1a49eac FS |
799 | dev_dbg(&client->dev, "%s: Selected cfmt UYVY", __func__); |
800 | selected_cfmt_regs = ov2640_uyvy_regs; | |
3153ac9c AP |
801 | } |
802 | ||
803 | /* reset hardware */ | |
804 | ov2640_reset(client); | |
805 | ||
806 | /* initialize the sensor with default data */ | |
807 | dev_dbg(&client->dev, "%s: Init default", __func__); | |
808 | ret = ov2640_write_array(client, ov2640_init_regs); | |
809 | if (ret < 0) | |
810 | goto err; | |
811 | ||
812 | /* select preamble */ | |
813 | dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name); | |
814 | ret = ov2640_write_array(client, ov2640_size_change_preamble_regs); | |
815 | if (ret < 0) | |
816 | goto err; | |
817 | ||
818 | /* set size win */ | |
819 | ret = ov2640_write_array(client, priv->win->regs); | |
820 | if (ret < 0) | |
821 | goto err; | |
822 | ||
823 | /* cfmt preamble */ | |
824 | dev_dbg(&client->dev, "%s: Set cfmt", __func__); | |
825 | ret = ov2640_write_array(client, ov2640_format_change_preamble_regs); | |
826 | if (ret < 0) | |
827 | goto err; | |
828 | ||
829 | /* set cfmt */ | |
830 | ret = ov2640_write_array(client, selected_cfmt_regs); | |
831 | if (ret < 0) | |
832 | goto err; | |
833 | ||
834 | priv->cfmt_code = code; | |
835 | *width = priv->win->width; | |
836 | *height = priv->win->height; | |
837 | ||
838 | return 0; | |
839 | ||
840 | err: | |
841 | dev_err(&client->dev, "%s: Error %d", __func__, ret); | |
842 | ov2640_reset(client); | |
843 | priv->win = NULL; | |
844 | ||
845 | return ret; | |
846 | } | |
847 | ||
da298c6d HV |
848 | static int ov2640_get_fmt(struct v4l2_subdev *sd, |
849 | struct v4l2_subdev_pad_config *cfg, | |
850 | struct v4l2_subdev_format *format) | |
3153ac9c | 851 | { |
da298c6d | 852 | struct v4l2_mbus_framefmt *mf = &format->format; |
3153ac9c AP |
853 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
854 | struct ov2640_priv *priv = to_ov2640(client); | |
855 | ||
da298c6d HV |
856 | if (format->pad) |
857 | return -EINVAL; | |
858 | ||
3153ac9c | 859 | if (!priv->win) { |
650b1815 | 860 | u32 width = SVGA_WIDTH, height = SVGA_HEIGHT; |
f9859839 | 861 | priv->win = ov2640_select_win(&width, &height); |
f5fe58fd | 862 | priv->cfmt_code = MEDIA_BUS_FMT_UYVY8_2X8; |
3153ac9c AP |
863 | } |
864 | ||
865 | mf->width = priv->win->width; | |
866 | mf->height = priv->win->height; | |
867 | mf->code = priv->cfmt_code; | |
868 | ||
869 | switch (mf->code) { | |
f5fe58fd BB |
870 | case MEDIA_BUS_FMT_RGB565_2X8_BE: |
871 | case MEDIA_BUS_FMT_RGB565_2X8_LE: | |
3153ac9c AP |
872 | mf->colorspace = V4L2_COLORSPACE_SRGB; |
873 | break; | |
874 | default: | |
f5fe58fd BB |
875 | case MEDIA_BUS_FMT_YUYV8_2X8: |
876 | case MEDIA_BUS_FMT_UYVY8_2X8: | |
3153ac9c AP |
877 | mf->colorspace = V4L2_COLORSPACE_JPEG; |
878 | } | |
879 | mf->field = V4L2_FIELD_NONE; | |
880 | ||
881 | return 0; | |
882 | } | |
883 | ||
717fd5b4 HV |
884 | static int ov2640_set_fmt(struct v4l2_subdev *sd, |
885 | struct v4l2_subdev_pad_config *cfg, | |
886 | struct v4l2_subdev_format *format) | |
3153ac9c | 887 | { |
717fd5b4 | 888 | struct v4l2_mbus_framefmt *mf = &format->format; |
3153ac9c | 889 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
3153ac9c | 890 | |
717fd5b4 HV |
891 | if (format->pad) |
892 | return -EINVAL; | |
3153ac9c | 893 | |
3153ac9c | 894 | /* |
ba400892 | 895 | * select suitable win, but don't store it |
3153ac9c | 896 | */ |
ba400892 | 897 | ov2640_select_win(&mf->width, &mf->height); |
3153ac9c AP |
898 | |
899 | mf->field = V4L2_FIELD_NONE; | |
900 | ||
901 | switch (mf->code) { | |
f5fe58fd BB |
902 | case MEDIA_BUS_FMT_RGB565_2X8_BE: |
903 | case MEDIA_BUS_FMT_RGB565_2X8_LE: | |
3153ac9c AP |
904 | mf->colorspace = V4L2_COLORSPACE_SRGB; |
905 | break; | |
906 | default: | |
f5fe58fd BB |
907 | mf->code = MEDIA_BUS_FMT_UYVY8_2X8; |
908 | case MEDIA_BUS_FMT_YUYV8_2X8: | |
909 | case MEDIA_BUS_FMT_UYVY8_2X8: | |
3153ac9c AP |
910 | mf->colorspace = V4L2_COLORSPACE_JPEG; |
911 | } | |
912 | ||
717fd5b4 HV |
913 | if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) |
914 | return ov2640_set_params(client, &mf->width, | |
915 | &mf->height, mf->code); | |
916 | cfg->try_fmt = *mf; | |
3153ac9c AP |
917 | return 0; |
918 | } | |
919 | ||
ebcff5fc HV |
920 | static int ov2640_enum_mbus_code(struct v4l2_subdev *sd, |
921 | struct v4l2_subdev_pad_config *cfg, | |
922 | struct v4l2_subdev_mbus_code_enum *code) | |
3153ac9c | 923 | { |
ebcff5fc | 924 | if (code->pad || code->index >= ARRAY_SIZE(ov2640_codes)) |
3153ac9c AP |
925 | return -EINVAL; |
926 | ||
ebcff5fc | 927 | code->code = ov2640_codes[code->index]; |
3153ac9c AP |
928 | return 0; |
929 | } | |
930 | ||
10d5509c HV |
931 | static int ov2640_get_selection(struct v4l2_subdev *sd, |
932 | struct v4l2_subdev_pad_config *cfg, | |
933 | struct v4l2_subdev_selection *sel) | |
3153ac9c | 934 | { |
10d5509c HV |
935 | if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) |
936 | return -EINVAL; | |
3153ac9c | 937 | |
10d5509c HV |
938 | switch (sel->target) { |
939 | case V4L2_SEL_TGT_CROP_BOUNDS: | |
940 | case V4L2_SEL_TGT_CROP_DEFAULT: | |
941 | case V4L2_SEL_TGT_CROP: | |
942 | sel->r.left = 0; | |
943 | sel->r.top = 0; | |
944 | sel->r.width = UXGA_WIDTH; | |
945 | sel->r.height = UXGA_HEIGHT; | |
946 | return 0; | |
947 | default: | |
948 | return -EINVAL; | |
949 | } | |
3153ac9c AP |
950 | } |
951 | ||
14178aa5 | 952 | static int ov2640_video_probe(struct i2c_client *client) |
3153ac9c AP |
953 | { |
954 | struct ov2640_priv *priv = to_ov2640(client); | |
955 | u8 pid, ver, midh, midl; | |
956 | const char *devname; | |
957 | int ret; | |
958 | ||
4bbc6d52 LP |
959 | ret = ov2640_s_power(&priv->subdev, 1); |
960 | if (ret < 0) | |
961 | return ret; | |
962 | ||
3153ac9c AP |
963 | /* |
964 | * check and show product ID and manufacturer ID | |
965 | */ | |
966 | i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS); | |
967 | pid = i2c_smbus_read_byte_data(client, PID); | |
968 | ver = i2c_smbus_read_byte_data(client, VER); | |
969 | midh = i2c_smbus_read_byte_data(client, MIDH); | |
970 | midl = i2c_smbus_read_byte_data(client, MIDL); | |
971 | ||
972 | switch (VERSION(pid, ver)) { | |
973 | case PID_OV2640: | |
974 | devname = "ov2640"; | |
3153ac9c AP |
975 | break; |
976 | default: | |
977 | dev_err(&client->dev, | |
978 | "Product ID error %x:%x\n", pid, ver); | |
979 | ret = -ENODEV; | |
4bbc6d52 | 980 | goto done; |
3153ac9c AP |
981 | } |
982 | ||
983 | dev_info(&client->dev, | |
984 | "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", | |
985 | devname, pid, ver, midh, midl); | |
986 | ||
4bbc6d52 | 987 | ret = v4l2_ctrl_handler_setup(&priv->hdl); |
3153ac9c | 988 | |
4bbc6d52 LP |
989 | done: |
990 | ov2640_s_power(&priv->subdev, 0); | |
3153ac9c AP |
991 | return ret; |
992 | } | |
993 | ||
f026671d HV |
994 | static const struct v4l2_ctrl_ops ov2640_ctrl_ops = { |
995 | .s_ctrl = ov2640_s_ctrl, | |
3153ac9c AP |
996 | }; |
997 | ||
6713c88f | 998 | static const struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { |
3153ac9c AP |
999 | #ifdef CONFIG_VIDEO_ADV_DEBUG |
1000 | .g_register = ov2640_g_register, | |
1001 | .s_register = ov2640_s_register, | |
1002 | #endif | |
4ec10bac | 1003 | .s_power = ov2640_s_power, |
3153ac9c AP |
1004 | }; |
1005 | ||
d463003b GL |
1006 | static int ov2640_g_mbus_config(struct v4l2_subdev *sd, |
1007 | struct v4l2_mbus_config *cfg) | |
1008 | { | |
1009 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
25a34811 | 1010 | struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); |
d463003b GL |
1011 | |
1012 | cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | | |
1013 | V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | | |
1014 | V4L2_MBUS_DATA_ACTIVE_HIGH; | |
1015 | cfg->type = V4L2_MBUS_PARALLEL; | |
25a34811 | 1016 | cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); |
d463003b GL |
1017 | |
1018 | return 0; | |
1019 | } | |
1020 | ||
6713c88f | 1021 | static const struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { |
3153ac9c | 1022 | .s_stream = ov2640_s_stream, |
d463003b | 1023 | .g_mbus_config = ov2640_g_mbus_config, |
3153ac9c AP |
1024 | }; |
1025 | ||
ebcff5fc HV |
1026 | static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = { |
1027 | .enum_mbus_code = ov2640_enum_mbus_code, | |
10d5509c | 1028 | .get_selection = ov2640_get_selection, |
da298c6d | 1029 | .get_fmt = ov2640_get_fmt, |
717fd5b4 | 1030 | .set_fmt = ov2640_set_fmt, |
ebcff5fc HV |
1031 | }; |
1032 | ||
6713c88f | 1033 | static const struct v4l2_subdev_ops ov2640_subdev_ops = { |
3153ac9c AP |
1034 | .core = &ov2640_subdev_core_ops, |
1035 | .video = &ov2640_subdev_video_ops, | |
ebcff5fc | 1036 | .pad = &ov2640_subdev_pad_ops, |
3153ac9c AP |
1037 | }; |
1038 | ||
4e65172f JW |
1039 | /* OF probe functions */ |
1040 | static int ov2640_hw_power(struct device *dev, int on) | |
1041 | { | |
1042 | struct i2c_client *client = to_i2c_client(dev); | |
1043 | struct ov2640_priv *priv = to_ov2640(client); | |
1044 | ||
1045 | dev_dbg(&client->dev, "%s: %s the camera\n", | |
1046 | __func__, on ? "ENABLE" : "DISABLE"); | |
1047 | ||
1048 | if (priv->pwdn_gpio) | |
1049 | gpiod_direction_output(priv->pwdn_gpio, !on); | |
1050 | ||
1051 | return 0; | |
1052 | } | |
1053 | ||
1054 | static int ov2640_hw_reset(struct device *dev) | |
1055 | { | |
1056 | struct i2c_client *client = to_i2c_client(dev); | |
1057 | struct ov2640_priv *priv = to_ov2640(client); | |
1058 | ||
1059 | if (priv->resetb_gpio) { | |
1060 | /* Active the resetb pin to perform a reset pulse */ | |
1061 | gpiod_direction_output(priv->resetb_gpio, 1); | |
1062 | usleep_range(3000, 5000); | |
1063 | gpiod_direction_output(priv->resetb_gpio, 0); | |
1064 | } | |
1065 | ||
1066 | return 0; | |
1067 | } | |
1068 | ||
1069 | static int ov2640_probe_dt(struct i2c_client *client, | |
1070 | struct ov2640_priv *priv) | |
1071 | { | |
1072 | /* Request the reset GPIO deasserted */ | |
1073 | priv->resetb_gpio = devm_gpiod_get_optional(&client->dev, "resetb", | |
1074 | GPIOD_OUT_LOW); | |
1075 | if (!priv->resetb_gpio) | |
1076 | dev_dbg(&client->dev, "resetb gpio is not assigned!\n"); | |
1077 | else if (IS_ERR(priv->resetb_gpio)) | |
1078 | return PTR_ERR(priv->resetb_gpio); | |
1079 | ||
1080 | /* Request the power down GPIO asserted */ | |
1081 | priv->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "pwdn", | |
1082 | GPIOD_OUT_HIGH); | |
1083 | if (!priv->pwdn_gpio) | |
1084 | dev_dbg(&client->dev, "pwdn gpio is not assigned!\n"); | |
1085 | else if (IS_ERR(priv->pwdn_gpio)) | |
1086 | return PTR_ERR(priv->pwdn_gpio); | |
1087 | ||
1088 | /* Initialize the soc_camera_subdev_desc */ | |
1089 | priv->ssdd_dt.power = ov2640_hw_power; | |
1090 | priv->ssdd_dt.reset = ov2640_hw_reset; | |
1091 | client->dev.platform_data = &priv->ssdd_dt; | |
1092 | ||
1093 | return 0; | |
1094 | } | |
1095 | ||
3153ac9c AP |
1096 | /* |
1097 | * i2c_driver functions | |
1098 | */ | |
1099 | static int ov2640_probe(struct i2c_client *client, | |
1100 | const struct i2c_device_id *did) | |
1101 | { | |
14178aa5 | 1102 | struct ov2640_priv *priv; |
25a34811 | 1103 | struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); |
14178aa5 GL |
1104 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
1105 | int ret; | |
3153ac9c | 1106 | |
3153ac9c AP |
1107 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
1108 | dev_err(&adapter->dev, | |
1109 | "OV2640: I2C-Adapter doesn't support SMBUS\n"); | |
1110 | return -EIO; | |
1111 | } | |
1112 | ||
70e176a5 | 1113 | priv = devm_kzalloc(&client->dev, sizeof(struct ov2640_priv), GFP_KERNEL); |
3153ac9c AP |
1114 | if (!priv) { |
1115 | dev_err(&adapter->dev, | |
1116 | "Failed to allocate memory for private data!\n"); | |
1117 | return -ENOMEM; | |
1118 | } | |
1119 | ||
4e65172f | 1120 | priv->clk = v4l2_clk_get(&client->dev, "xvclk"); |
f180ebae JW |
1121 | if (IS_ERR(priv->clk)) |
1122 | return -EPROBE_DEFER; | |
1123 | ||
4e65172f JW |
1124 | if (!ssdd && !client->dev.of_node) { |
1125 | dev_err(&client->dev, "Missing platform_data for driver\n"); | |
1126 | ret = -EINVAL; | |
1127 | goto err_clk; | |
1128 | } | |
1129 | ||
1130 | if (!ssdd) { | |
1131 | ret = ov2640_probe_dt(client, priv); | |
1132 | if (ret) | |
1133 | goto err_clk; | |
1134 | } | |
1135 | ||
3153ac9c | 1136 | v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops); |
f026671d HV |
1137 | v4l2_ctrl_handler_init(&priv->hdl, 2); |
1138 | v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, | |
1139 | V4L2_CID_VFLIP, 0, 1, 1, 0); | |
1140 | v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, | |
1141 | V4L2_CID_HFLIP, 0, 1, 1, 0); | |
1142 | priv->subdev.ctrl_handler = &priv->hdl; | |
f180ebae JW |
1143 | if (priv->hdl.error) { |
1144 | ret = priv->hdl.error; | |
1145 | goto err_clk; | |
9aea470b GL |
1146 | } |
1147 | ||
14178aa5 | 1148 | ret = ov2640_video_probe(client); |
f180ebae JW |
1149 | if (ret < 0) |
1150 | goto err_videoprobe; | |
3153ac9c | 1151 | |
f180ebae JW |
1152 | ret = v4l2_async_register_subdev(&priv->subdev); |
1153 | if (ret < 0) | |
1154 | goto err_videoprobe; | |
1155 | ||
1156 | dev_info(&adapter->dev, "OV2640 Probed\n"); | |
1157 | ||
1158 | return 0; | |
1159 | ||
1160 | err_videoprobe: | |
1161 | v4l2_ctrl_handler_free(&priv->hdl); | |
1162 | err_clk: | |
1163 | v4l2_clk_put(priv->clk); | |
3153ac9c AP |
1164 | return ret; |
1165 | } | |
1166 | ||
1167 | static int ov2640_remove(struct i2c_client *client) | |
1168 | { | |
1169 | struct ov2640_priv *priv = to_ov2640(client); | |
3153ac9c | 1170 | |
f180ebae | 1171 | v4l2_async_unregister_subdev(&priv->subdev); |
9aea470b | 1172 | v4l2_clk_put(priv->clk); |
f026671d HV |
1173 | v4l2_device_unregister_subdev(&priv->subdev); |
1174 | v4l2_ctrl_handler_free(&priv->hdl); | |
3153ac9c AP |
1175 | return 0; |
1176 | } | |
1177 | ||
1178 | static const struct i2c_device_id ov2640_id[] = { | |
1179 | { "ov2640", 0 }, | |
1180 | { } | |
1181 | }; | |
1182 | MODULE_DEVICE_TABLE(i2c, ov2640_id); | |
1183 | ||
4e65172f JW |
1184 | static const struct of_device_id ov2640_of_match[] = { |
1185 | {.compatible = "ovti,ov2640", }, | |
1186 | {}, | |
1187 | }; | |
1188 | MODULE_DEVICE_TABLE(of, ov2640_of_match); | |
1189 | ||
3153ac9c AP |
1190 | static struct i2c_driver ov2640_i2c_driver = { |
1191 | .driver = { | |
1192 | .name = "ov2640", | |
4e65172f | 1193 | .of_match_table = of_match_ptr(ov2640_of_match), |
3153ac9c AP |
1194 | }, |
1195 | .probe = ov2640_probe, | |
1196 | .remove = ov2640_remove, | |
1197 | .id_table = ov2640_id, | |
1198 | }; | |
1199 | ||
c6e8d86f | 1200 | module_i2c_driver(ov2640_i2c_driver); |
3153ac9c AP |
1201 | |
1202 | MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor"); | |
1203 | MODULE_AUTHOR("Alberto Panizzo"); | |
1204 | MODULE_LICENSE("GPL v2"); |