Commit | Line | Data |
---|---|---|
ec8f24b7 | 1 | # SPDX-License-Identifier: GPL-2.0-only |
cb7a01ac MCC |
2 | # |
3 | # Multimedia Video device configuration | |
4 | # | |
5 | ||
6 | if VIDEO_V4L2 | |
7 | ||
cb7a01ac | 8 | config VIDEO_IR_I2C |
fccea74f | 9 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
10 | depends on I2C && RC_CORE |
11 | default y | |
b60a5b8d | 12 | help |
cb7a01ac MCC |
13 | Most boards have an IR chip directly connected via GPIO. However, |
14 | some video boards have the IR connected via I2C bus. | |
15 | ||
16 | If your board doesn't have an I2C IR chip, you may disable this | |
17 | option. | |
18 | ||
19 | In doubt, say Y. | |
20 | ||
21 | # | |
22 | # Encoder / Decoder module configuration | |
23 | # | |
24 | ||
8283a092 | 25 | menu "I2C Encoders, decoders, sensors and other helper chips" |
5cc596c6 | 26 | visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST |
cb7a01ac MCC |
27 | |
28 | comment "Audio decoders, processors and mixers" | |
29 | ||
30 | config VIDEO_TVAUDIO | |
31 | tristate "Simple audio decoder chips" | |
32 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 33 | help |
cb7a01ac MCC |
34 | Support for several audio decoder chips found on some bt8xx boards: |
35 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
36 | tea6320, tea6420, tda8425, ta8874z. | |
37 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
38 | ||
39 | To compile this driver as a module, choose M here: the | |
40 | module will be called tvaudio. | |
41 | ||
42 | config VIDEO_TDA7432 | |
43 | tristate "Philips TDA7432 audio processor" | |
44 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 45 | help |
cb7a01ac MCC |
46 | Support for tda7432 audio decoder chip found on some bt8xx boards. |
47 | ||
48 | To compile this driver as a module, choose M here: the | |
49 | module will be called tda7432. | |
50 | ||
51 | config VIDEO_TDA9840 | |
52 | tristate "Philips TDA9840 audio processor" | |
53 | depends on I2C | |
b60a5b8d | 54 | help |
cb7a01ac MCC |
55 | Support for tda9840 audio decoder chip found on some Zoran boards. |
56 | ||
57 | To compile this driver as a module, choose M here: the | |
58 | module will be called tda9840. | |
59 | ||
9ac0038d TH |
60 | config VIDEO_TDA1997X |
61 | tristate "NXP TDA1997x HDMI receiver" | |
62 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
15001033 | 63 | depends on SND_SOC |
79e89e36 | 64 | select HDMI |
5f2efda7 KV |
65 | select SND_PCM |
66 | select V4L2_FWNODE | |
b60a5b8d | 67 | help |
9ac0038d TH |
68 | V4L2 subdevice driver for the NXP TDA1997x HDMI receivers. |
69 | ||
70 | To compile this driver as a module, choose M here: the | |
71 | module will be called tda1997x. | |
72 | ||
cb7a01ac MCC |
73 | config VIDEO_TEA6415C |
74 | tristate "Philips TEA6415C audio processor" | |
75 | depends on I2C | |
b60a5b8d | 76 | help |
cb7a01ac MCC |
77 | Support for tea6415c audio decoder chip found on some bt8xx boards. |
78 | ||
79 | To compile this driver as a module, choose M here: the | |
80 | module will be called tea6415c. | |
81 | ||
82 | config VIDEO_TEA6420 | |
83 | tristate "Philips TEA6420 audio processor" | |
84 | depends on I2C | |
b60a5b8d | 85 | help |
cb7a01ac MCC |
86 | Support for tea6420 audio decoder chip found on some bt8xx boards. |
87 | ||
88 | To compile this driver as a module, choose M here: the | |
89 | module will be called tea6420. | |
90 | ||
91 | config VIDEO_MSP3400 | |
92 | tristate "Micronas MSP34xx audio decoders" | |
93 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 94 | help |
cb7a01ac MCC |
95 | Support for the Micronas MSP34xx series of audio decoders. |
96 | ||
97 | To compile this driver as a module, choose M here: the | |
98 | module will be called msp3400. | |
99 | ||
fc279cc2 HV |
100 | config VIDEO_CS3308 |
101 | tristate "Cirrus Logic CS3308 audio ADC" | |
102 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 103 | help |
fc279cc2 HV |
104 | Support for the Cirrus Logic CS3308 High Performance 8-Channel |
105 | Analog Volume Control | |
106 | ||
107 | To compile this driver as a module, choose M here: the | |
108 | module will be called cs3308. | |
109 | ||
cb7a01ac MCC |
110 | config VIDEO_CS5345 |
111 | tristate "Cirrus Logic CS5345 audio ADC" | |
112 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 113 | help |
cb7a01ac MCC |
114 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz |
115 | stereo A/D converter. | |
116 | ||
117 | To compile this driver as a module, choose M here: the | |
118 | module will be called cs5345. | |
119 | ||
120 | config VIDEO_CS53L32A | |
121 | tristate "Cirrus Logic CS53L32A audio ADC" | |
122 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 123 | help |
cb7a01ac MCC |
124 | Support for the Cirrus Logic CS53L32A low voltage |
125 | stereo A/D converter. | |
126 | ||
127 | To compile this driver as a module, choose M here: the | |
128 | module will be called cs53l32a. | |
129 | ||
130 | config VIDEO_TLV320AIC23B | |
131 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 132 | depends on VIDEO_V4L2 && I2C |
b60a5b8d | 133 | help |
cb7a01ac MCC |
134 | Support for the Texas Instruments TLV320AIC23B audio codec. |
135 | ||
136 | To compile this driver as a module, choose M here: the | |
137 | module will be called tlv320aic23b. | |
138 | ||
73d9f979 HV |
139 | config VIDEO_UDA1342 |
140 | tristate "Philips UDA1342 audio codec" | |
141 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 142 | help |
73d9f979 HV |
143 | Support for the Philips UDA1342 audio codec. |
144 | ||
145 | To compile this driver as a module, choose M here: the | |
146 | module will be called uda1342. | |
147 | ||
cb7a01ac MCC |
148 | config VIDEO_WM8775 |
149 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
150 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 151 | help |
cb7a01ac MCC |
152 | Support for the Wolfson Microelectronics WM8775 high |
153 | performance stereo A/D Converter with a 4 channel input mixer. | |
154 | ||
155 | To compile this driver as a module, choose M here: the | |
156 | module will be called wm8775. | |
157 | ||
158 | config VIDEO_WM8739 | |
159 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
160 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 161 | help |
cb7a01ac MCC |
162 | Support for the Wolfson Microelectronics WM8739 |
163 | stereo A/D Converter. | |
164 | ||
165 | To compile this driver as a module, choose M here: the | |
166 | module will be called wm8739. | |
167 | ||
168 | config VIDEO_VP27SMPX | |
c7c54a98 | 169 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac | 170 | depends on VIDEO_V4L2 && I2C |
b60a5b8d | 171 | help |
cb7a01ac MCC |
172 | Support for the internal MPX of the Panasonic VP27s tuner. |
173 | ||
174 | To compile this driver as a module, choose M here: the | |
175 | module will be called vp27smpx. | |
176 | ||
c7c54a98 HV |
177 | config VIDEO_SONY_BTF_MPX |
178 | tristate "Sony BTF's internal MPX" | |
179 | depends on VIDEO_V4L2 && I2C | |
180 | help | |
181 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
182 | ||
183 | To compile this driver as a module, choose M here: the | |
184 | module will be called sony-btf-mpx. | |
185 | ||
cb7a01ac MCC |
186 | comment "RDS decoders" |
187 | ||
188 | config VIDEO_SAA6588 | |
189 | tristate "SAA6588 Radio Chip RDS decoder support" | |
190 | depends on VIDEO_V4L2 && I2C | |
191 | ||
192 | help | |
193 | Support for this Radio Data System (RDS) decoder. This allows | |
194 | seeing radio station identification transmitted using this | |
195 | standard. | |
196 | ||
197 | To compile this driver as a module, choose M here: the | |
198 | module will be called saa6588. | |
199 | ||
200 | comment "Video decoders" | |
201 | ||
202 | config VIDEO_ADV7180 | |
203 | tristate "Analog Devices ADV7180 decoder" | |
65d9e14a | 204 | depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
b60a5b8d | 205 | help |
cb7a01ac MCC |
206 | Support for the Analog Devices ADV7180 video decoder. |
207 | ||
208 | To compile this driver as a module, choose M here: the | |
209 | module will be called adv7180. | |
210 | ||
211 | config VIDEO_ADV7183 | |
212 | tristate "Analog Devices ADV7183 decoder" | |
213 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 214 | help |
cb7a01ac MCC |
215 | V4l2 subdevice driver for the Analog Devices |
216 | ADV7183 video decoder. | |
217 | ||
218 | To compile this driver as a module, choose M here: the | |
219 | module will be called adv7183. | |
220 | ||
3e89586a KB |
221 | config VIDEO_ADV748X |
222 | tristate "Analog Devices ADV748x decoder" | |
223 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
224 | depends on OF | |
225 | select REGMAP_I2C | |
6685d515 | 226 | select V4L2_FWNODE |
b60a5b8d | 227 | help |
3e89586a KB |
228 | V4L2 subdevice driver for the Analog Devices |
229 | ADV7481 and ADV7482 HDMI/Analog video decoders. | |
230 | ||
231 | To compile this driver as a module, choose M here: the | |
232 | module will be called adv748x. | |
233 | ||
54450f59 HV |
234 | config VIDEO_ADV7604 |
235 | tristate "Analog Devices ADV7604 decoder" | |
2f8e75d2 GU |
236 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
237 | depends on GPIOLIB || COMPILE_TEST | |
516613c1 | 238 | select HDMI |
859969b3 | 239 | select V4L2_FWNODE |
b60a5b8d | 240 | help |
54450f59 HV |
241 | Support for the Analog Devices ADV7604 video decoder. |
242 | ||
243 | This is a Analog Devices Component/Graphics Digitizer | |
244 | with 4:1 Multiplexed HDMI Receiver. | |
245 | ||
246 | To compile this driver as a module, choose M here: the | |
247 | module will be called adv7604. | |
248 | ||
41a52373 HV |
249 | config VIDEO_ADV7604_CEC |
250 | bool "Enable Analog Devices ADV7604 CEC support" | |
9177e51d HV |
251 | depends on VIDEO_ADV7604 |
252 | select CEC_CORE | |
b60a5b8d | 253 | help |
41a52373 HV |
254 | When selected the adv7604 will support the optional |
255 | HDMI CEC feature. | |
256 | ||
a89bcd4c HV |
257 | config VIDEO_ADV7842 |
258 | tristate "Analog Devices ADV7842 decoder" | |
584ca025 | 259 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
09f90c53 | 260 | select HDMI |
b60a5b8d | 261 | help |
a89bcd4c HV |
262 | Support for the Analog Devices ADV7842 video decoder. |
263 | ||
264 | This is a Analog Devices Component/Graphics/SD Digitizer | |
265 | with 2:1 Multiplexed HDMI Receiver. | |
266 | ||
267 | To compile this driver as a module, choose M here: the | |
268 | module will be called adv7842. | |
269 | ||
25c84fb1 HV |
270 | config VIDEO_ADV7842_CEC |
271 | bool "Enable Analog Devices ADV7842 CEC support" | |
9177e51d HV |
272 | depends on VIDEO_ADV7842 |
273 | select CEC_CORE | |
b60a5b8d | 274 | help |
25c84fb1 HV |
275 | When selected the adv7842 will support the optional |
276 | HDMI CEC feature. | |
277 | ||
cb7a01ac MCC |
278 | config VIDEO_BT819 |
279 | tristate "BT819A VideoStream decoder" | |
280 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 281 | help |
cb7a01ac MCC |
282 | Support for BT819A video decoder. |
283 | ||
284 | To compile this driver as a module, choose M here: the | |
285 | module will be called bt819. | |
286 | ||
287 | config VIDEO_BT856 | |
288 | tristate "BT856 VideoStream decoder" | |
289 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 290 | help |
cb7a01ac MCC |
291 | Support for BT856 video decoder. |
292 | ||
293 | To compile this driver as a module, choose M here: the | |
294 | module will be called bt856. | |
295 | ||
296 | config VIDEO_BT866 | |
297 | tristate "BT866 VideoStream decoder" | |
298 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 299 | help |
cb7a01ac MCC |
300 | Support for BT866 video decoder. |
301 | ||
302 | To compile this driver as a module, choose M here: the | |
303 | module will be called bt866. | |
304 | ||
305 | config VIDEO_KS0127 | |
306 | tristate "KS0127 video decoder" | |
307 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 308 | help |
cb7a01ac MCC |
309 | Support for KS0127 video decoder. |
310 | ||
311 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
312 | cards. | |
313 | ||
314 | To compile this driver as a module, choose M here: the | |
315 | module will be called ks0127. | |
316 | ||
ed3e12d2 VB |
317 | config VIDEO_ML86V7667 |
318 | tristate "OKI ML86V7667 video decoder" | |
319 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 320 | help |
ed3e12d2 VB |
321 | Support for the OKI Semiconductor ML86V7667 video decoder. |
322 | ||
323 | To compile this driver as a module, choose M here: the | |
324 | module will be called ml86v7667. | |
325 | ||
cb7a01ac MCC |
326 | config VIDEO_SAA7110 |
327 | tristate "Philips SAA7110 video decoder" | |
328 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 329 | help |
cb7a01ac MCC |
330 | Support for the Philips SAA7110 video decoders. |
331 | ||
332 | To compile this driver as a module, choose M here: the | |
333 | module will be called saa7110. | |
334 | ||
335 | config VIDEO_SAA711X | |
336 | tristate "Philips SAA7111/3/4/5 video decoders" | |
337 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 338 | help |
cb7a01ac MCC |
339 | Support for the Philips SAA7111/3/4/5 video decoders. |
340 | ||
341 | To compile this driver as a module, choose M here: the | |
342 | module will be called saa7115. | |
343 | ||
d32d9864 MR |
344 | config VIDEO_TC358743 |
345 | tristate "Toshiba TC358743 decoder" | |
22dbe35a HV |
346 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
347 | select HDMI | |
859969b3 | 348 | select V4L2_FWNODE |
b60a5b8d | 349 | help |
d32d9864 MR |
350 | Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge. |
351 | ||
352 | To compile this driver as a module, choose M here: the | |
353 | module will be called tc358743. | |
354 | ||
a0ec8d1d HV |
355 | config VIDEO_TC358743_CEC |
356 | bool "Enable Toshiba TC358743 CEC support" | |
357 | depends on VIDEO_TC358743 | |
358 | select CEC_CORE | |
b60a5b8d | 359 | help |
a0ec8d1d HV |
360 | When selected the tc358743 will support the optional |
361 | HDMI CEC feature. | |
362 | ||
cb7a01ac MCC |
363 | config VIDEO_TVP514X |
364 | tristate "Texas Instruments TVP514x video decoder" | |
365 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 366 | select V4L2_FWNODE |
b60a5b8d | 367 | help |
be9543ec | 368 | This is a Video4Linux2 sensor driver for the TI TVP5146/47 |
cb7a01ac MCC |
369 | decoder. It is currently working with the TI OMAP3 camera |
370 | controller. | |
371 | ||
372 | To compile this driver as a module, choose M here: the | |
373 | module will be called tvp514x. | |
374 | ||
375 | config VIDEO_TVP5150 | |
376 | tristate "Texas Instruments TVP5150 video decoder" | |
377 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 378 | select V4L2_FWNODE |
b60a5b8d | 379 | help |
cb7a01ac MCC |
380 | Support for the Texas Instruments TVP5150 video decoder. |
381 | ||
382 | To compile this driver as a module, choose M here: the | |
383 | module will be called tvp5150. | |
384 | ||
385 | config VIDEO_TVP7002 | |
386 | tristate "Texas Instruments TVP7002 video decoder" | |
387 | depends on VIDEO_V4L2 && I2C | |
859969b3 | 388 | select V4L2_FWNODE |
b60a5b8d | 389 | help |
cb7a01ac MCC |
390 | Support for the Texas Instruments TVP7002 video decoder. |
391 | ||
392 | To compile this driver as a module, choose M here: the | |
393 | module will be called tvp7002. | |
394 | ||
12be52a9 HV |
395 | config VIDEO_TW2804 |
396 | tristate "Techwell TW2804 multiple video decoder" | |
397 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 398 | help |
12be52a9 HV |
399 | Support for the Techwell tw2804 multiple video decoder. |
400 | ||
401 | To compile this driver as a module, choose M here: the | |
402 | module will be called tw2804. | |
403 | ||
0890ec19 HV |
404 | config VIDEO_TW9903 |
405 | tristate "Techwell TW9903 video decoder" | |
406 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 407 | help |
12be52a9 | 408 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
409 | with high quality down scaler. |
410 | ||
411 | To compile this driver as a module, choose M here: the | |
412 | module will be called tw9903. | |
413 | ||
a000e9a0 HV |
414 | config VIDEO_TW9906 |
415 | tristate "Techwell TW9906 video decoder" | |
416 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 417 | help |
a000e9a0 HV |
418 | Support for the Techwell tw9906 enhanced multi-standard comb filter |
419 | video decoder with YCbCr input support. | |
420 | ||
421 | To compile this driver as a module, choose M here: the | |
422 | module will be called tw9906. | |
423 | ||
7b20f325 JM |
424 | config VIDEO_TW9910 |
425 | tristate "Techwell TW9910 video decoder" | |
426 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 427 | help |
7b20f325 JM |
428 | Support for Techwell TW9910 NTSC/PAL/SECAM video decoder. |
429 | ||
430 | To compile this driver as a module, choose M here: the | |
431 | module will be called tw9910. | |
432 | ||
cb7a01ac MCC |
433 | config VIDEO_VPX3220 |
434 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
435 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 436 | help |
cb7a01ac MCC |
437 | Support for VPX322x video decoders. |
438 | ||
439 | To compile this driver as a module, choose M here: the | |
440 | module will be called vpx3220. | |
441 | ||
442 | comment "Video and audio decoders" | |
443 | ||
444 | config VIDEO_SAA717X | |
445 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
446 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 447 | help |
cb7a01ac MCC |
448 | Support for the Philips SAA7171/3/4 audio/video decoders. |
449 | ||
450 | To compile this driver as a module, choose M here: the | |
451 | module will be called saa717x. | |
452 | ||
453 | source "drivers/media/i2c/cx25840/Kconfig" | |
454 | ||
cb7a01ac MCC |
455 | comment "Video encoders" |
456 | ||
457 | config VIDEO_SAA7127 | |
458 | tristate "Philips SAA7127/9 digital video encoders" | |
459 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 460 | help |
cb7a01ac MCC |
461 | Support for the Philips SAA7127/9 digital video encoders. |
462 | ||
463 | To compile this driver as a module, choose M here: the | |
464 | module will be called saa7127. | |
465 | ||
466 | config VIDEO_SAA7185 | |
467 | tristate "Philips SAA7185 video encoder" | |
468 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 469 | help |
cb7a01ac MCC |
470 | Support for the Philips SAA7185 video encoder. |
471 | ||
472 | To compile this driver as a module, choose M here: the | |
473 | module will be called saa7185. | |
474 | ||
475 | config VIDEO_ADV7170 | |
476 | tristate "Analog Devices ADV7170 video encoder" | |
477 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 478 | help |
cb7a01ac MCC |
479 | Support for the Analog Devices ADV7170 video encoder driver |
480 | ||
481 | To compile this driver as a module, choose M here: the | |
482 | module will be called adv7170. | |
483 | ||
484 | config VIDEO_ADV7175 | |
485 | tristate "Analog Devices ADV7175 video encoder" | |
486 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 487 | help |
cb7a01ac MCC |
488 | Support for the Analog Devices ADV7175 video encoder driver |
489 | ||
490 | To compile this driver as a module, choose M here: the | |
491 | module will be called adv7175. | |
492 | ||
493 | config VIDEO_ADV7343 | |
494 | tristate "ADV7343 video encoder" | |
495 | depends on I2C | |
496 | help | |
497 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
498 | ||
499 | To compile this driver as a module, choose M here: the | |
500 | module will be called adv7343. | |
501 | ||
502 | config VIDEO_ADV7393 | |
503 | tristate "ADV7393 video encoder" | |
504 | depends on I2C | |
505 | help | |
506 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
507 | ||
508 | To compile this driver as a module, choose M here: the | |
509 | module will be called adv7393. | |
510 | ||
5a544cce HV |
511 | config VIDEO_ADV7511 |
512 | tristate "Analog Devices ADV7511 encoder" | |
584ca025 | 513 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
b4dbad8f | 514 | select HDMI |
b60a5b8d | 515 | help |
5a544cce HV |
516 | Support for the Analog Devices ADV7511 video encoder. |
517 | ||
518 | This is a Analog Devices HDMI transmitter. | |
519 | ||
520 | To compile this driver as a module, choose M here: the | |
521 | module will be called adv7511. | |
522 | ||
257d4eae HV |
523 | config VIDEO_ADV7511_CEC |
524 | bool "Enable Analog Devices ADV7511 CEC support" | |
9177e51d HV |
525 | depends on VIDEO_ADV7511 |
526 | select CEC_CORE | |
b60a5b8d | 527 | help |
257d4eae HV |
528 | When selected the adv7511 will support the optional |
529 | HDMI CEC feature. | |
530 | ||
117a55b6 HV |
531 | config VIDEO_AD9389B |
532 | tristate "Analog Devices AD9389B encoder" | |
533 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
b60a5b8d | 534 | help |
117a55b6 HV |
535 | Support for the Analog Devices AD9389B video encoder. |
536 | ||
537 | This is a Analog Devices HDMI transmitter. | |
538 | ||
539 | To compile this driver as a module, choose M here: the | |
540 | module will be called ad9389b. | |
541 | ||
cb7a01ac MCC |
542 | config VIDEO_AK881X |
543 | tristate "AK8813/AK8814 video encoders" | |
544 | depends on I2C | |
545 | help | |
546 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
547 | ||
14735190 HV |
548 | config VIDEO_THS8200 |
549 | tristate "Texas Instruments THS8200 video encoder" | |
550 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 551 | help |
14735190 HV |
552 | Support for the Texas Instruments THS8200 video encoder. |
553 | ||
554 | To compile this driver as a module, choose M here: the | |
555 | module will be called ths8200. | |
556 | ||
cb7a01ac MCC |
557 | comment "Camera sensor devices" |
558 | ||
559 | config VIDEO_APTINA_PLL | |
560 | tristate | |
561 | ||
562 | config VIDEO_SMIAPP_PLL | |
563 | tristate | |
564 | ||
43619059 RRD |
565 | config VIDEO_IMX214 |
566 | tristate "Sony IMX214 sensor support" | |
567 | depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
568 | depends on MEDIA_CAMERA_SUPPORT | |
569 | depends on V4L2_FWNODE | |
570 | help | |
571 | This is a Video4Linux2 sensor driver for the Sony | |
572 | IMX214 camera. | |
573 | ||
574 | To compile this driver as a module, choose M here: the | |
575 | module will be called imx214. | |
576 | ||
e4802cb0 JC |
577 | config VIDEO_IMX258 |
578 | tristate "Sony IMX258 sensor support" | |
579 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
580 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 581 | help |
be9543ec | 582 | This is a Video4Linux2 sensor driver for the Sony |
e4802cb0 JC |
583 | IMX258 camera. |
584 | ||
585 | To compile this driver as a module, choose M here: the | |
586 | module will be called imx258. | |
587 | ||
0985dd30 LL |
588 | config VIDEO_IMX274 |
589 | tristate "Sony IMX274 sensor support" | |
590 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
591 | depends on MEDIA_CAMERA_SUPPORT | |
4f9d7225 | 592 | select REGMAP_I2C |
b60a5b8d | 593 | help |
be9543ec | 594 | This is a V4L2 sensor driver for the Sony IMX274 |
0985dd30 LL |
595 | CMOS image sensor. |
596 | ||
8a89dc62 BC |
597 | config VIDEO_IMX319 |
598 | tristate "Sony IMX319 sensor support" | |
599 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
600 | depends on MEDIA_CAMERA_SUPPORT | |
601 | help | |
602 | This is a Video4Linux2 sensor driver for the Sony | |
603 | IMX319 camera. | |
604 | ||
605 | To compile this driver as a module, choose M here: the | |
606 | module will be called imx319. | |
607 | ||
df0b5c4a BC |
608 | config VIDEO_IMX355 |
609 | tristate "Sony IMX355 sensor support" | |
610 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
611 | depends on MEDIA_CAMERA_SUPPORT | |
612 | help | |
613 | This is a Video4Linux2 sensor driver for the Sony | |
614 | IMX355 camera. | |
615 | ||
616 | To compile this driver as a module, choose M here: the | |
617 | module will be called imx355. | |
618 | ||
34aa8879 HV |
619 | config VIDEO_OV2640 |
620 | tristate "OmniVision OV2640 sensor support" | |
a463ea99 | 621 | depends on VIDEO_V4L2 && I2C |
34aa8879 HV |
622 | depends on MEDIA_CAMERA_SUPPORT |
623 | help | |
be9543ec | 624 | This is a Video4Linux2 sensor driver for the OmniVision |
34aa8879 HV |
625 | OV2640 camera. |
626 | ||
627 | To compile this driver as a module, choose M here: the | |
628 | module will be called ov2640. | |
629 | ||
c4c0283a BP |
630 | config VIDEO_OV2659 |
631 | tristate "OmniVision OV2659 sensor support" | |
632 | depends on VIDEO_V4L2 && I2C | |
633 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 634 | select V4L2_FWNODE |
b60a5b8d | 635 | help |
be9543ec | 636 | This is a Video4Linux2 sensor driver for the OmniVision |
c4c0283a BP |
637 | OV2659 camera. |
638 | ||
639 | To compile this driver as a module, choose M here: the | |
640 | module will be called ov2659. | |
641 | ||
3ee47cad RMS |
642 | config VIDEO_OV2680 |
643 | tristate "OmniVision OV2680 sensor support" | |
644 | depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER | |
645 | depends on MEDIA_CAMERA_SUPPORT | |
646 | select V4L2_FWNODE | |
b60a5b8d | 647 | help |
3ee47cad RMS |
648 | This is a Video4Linux2 sensor driver for the OmniVision |
649 | OV2680 camera. | |
650 | ||
651 | To compile this driver as a module, choose M here: the | |
652 | module will be called ov2680. | |
653 | ||
e3861d91 SZ |
654 | config VIDEO_OV2685 |
655 | tristate "OmniVision OV2685 sensor support" | |
656 | depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER | |
657 | depends on MEDIA_CAMERA_SUPPORT | |
658 | select V4L2_FWNODE | |
b60a5b8d | 659 | help |
be9543ec | 660 | This is a Video4Linux2 sensor driver for the OmniVision |
e3861d91 SZ |
661 | OV2685 camera. |
662 | ||
663 | To compile this driver as a module, choose M here: the | |
664 | module will be called ov2685. | |
665 | ||
19a81c14 SL |
666 | config VIDEO_OV5640 |
667 | tristate "OmniVision OV5640 sensor support" | |
668 | depends on OF | |
669 | depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
670 | depends on MEDIA_CAMERA_SUPPORT | |
671 | select V4L2_FWNODE | |
b60a5b8d | 672 | help |
be9543ec | 673 | This is a Video4Linux2 sensor driver for the Omnivision |
19a81c14 SL |
674 | OV5640 camera sensor with a MIPI CSI-2 interface. |
675 | ||
9cae9722 TT |
676 | config VIDEO_OV5645 |
677 | tristate "OmniVision OV5645 sensor support" | |
678 | depends on OF | |
679 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
680 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 681 | select V4L2_FWNODE |
b60a5b8d | 682 | help |
be9543ec | 683 | This is a Video4Linux2 sensor driver for the OmniVision |
9cae9722 TT |
684 | OV5645 camera. |
685 | ||
686 | To compile this driver as a module, choose M here: the | |
687 | module will be called ov5645. | |
688 | ||
3c2472a3 RO |
689 | config VIDEO_OV5647 |
690 | tristate "OmniVision OV5647 sensor support" | |
691 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
692 | depends on MEDIA_CAMERA_SUPPORT | |
859969b3 | 693 | select V4L2_FWNODE |
b60a5b8d | 694 | help |
be9543ec | 695 | This is a Video4Linux2 sensor driver for the OmniVision |
3c2472a3 RO |
696 | OV5647 camera. |
697 | ||
698 | To compile this driver as a module, choose M here: the | |
699 | module will be called ov5647. | |
700 | ||
23a52386 JK |
701 | config VIDEO_OV6650 |
702 | tristate "OmniVision OV6650 sensor support" | |
703 | depends on I2C && VIDEO_V4L2 | |
704 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 705 | help |
be9543ec | 706 | This is a Video4Linux2 sensor driver for the OmniVision |
23a52386 JK |
707 | OV6650 camera. |
708 | ||
709 | To compile this driver as a module, choose M here: the | |
710 | module will be called ov6650. | |
711 | ||
5de35c9b CR |
712 | config VIDEO_OV5670 |
713 | tristate "OmniVision OV5670 sensor support" | |
fa31c117 | 714 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
5de35c9b | 715 | depends on MEDIA_CAMERA_SUPPORT |
fa31c117 | 716 | depends on MEDIA_CONTROLLER |
5de35c9b | 717 | select V4L2_FWNODE |
b60a5b8d | 718 | help |
be9543ec | 719 | This is a Video4Linux2 sensor driver for the OmniVision |
5de35c9b CR |
720 | OV5670 camera. |
721 | ||
722 | To compile this driver as a module, choose M here: the | |
723 | module will be called ov5670. | |
724 | ||
8a77009b SZ |
725 | config VIDEO_OV5695 |
726 | tristate "OmniVision OV5695 sensor support" | |
727 | depends on I2C && VIDEO_V4L2 | |
728 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 729 | help |
be9543ec | 730 | This is a Video4Linux2 sensor driver for the OmniVision |
8a77009b SZ |
731 | OV5695 camera. |
732 | ||
733 | To compile this driver as a module, choose M here: the | |
734 | module will be called ov5695. | |
735 | ||
d30bb512 TT |
736 | config VIDEO_OV7251 |
737 | tristate "OmniVision OV7251 sensor support" | |
738 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
739 | depends on MEDIA_CAMERA_SUPPORT | |
740 | select V4L2_FWNODE | |
741 | help | |
be9543ec | 742 | This is a Video4Linux2 sensor driver for the OmniVision |
d30bb512 TT |
743 | OV7251 camera. |
744 | ||
745 | To compile this driver as a module, choose M here: the | |
746 | module will be called ov7251. | |
747 | ||
762c2812 JM |
748 | config VIDEO_OV772X |
749 | tristate "OmniVision OV772x sensor support" | |
750 | depends on I2C && VIDEO_V4L2 | |
751 | depends on MEDIA_CAMERA_SUPPORT | |
5bbf3221 | 752 | select REGMAP_SCCB |
b60a5b8d | 753 | help |
be9543ec | 754 | This is a Video4Linux2 sensor driver for the OmniVision |
762c2812 JM |
755 | OV772x camera. |
756 | ||
757 | To compile this driver as a module, choose M here: the | |
758 | module will be called ov772x. | |
759 | ||
ec367c3c HV |
760 | config VIDEO_OV7640 |
761 | tristate "OmniVision OV7640 sensor support" | |
762 | depends on I2C && VIDEO_V4L2 | |
763 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 764 | help |
be9543ec | 765 | This is a Video4Linux2 sensor driver for the OmniVision |
ec367c3c HV |
766 | OV7640 camera. |
767 | ||
768 | To compile this driver as a module, choose M here: the | |
769 | module will be called ov7640. | |
770 | ||
cb7a01ac MCC |
771 | config VIDEO_OV7670 |
772 | tristate "OmniVision OV7670 sensor support" | |
773 | depends on I2C && VIDEO_V4L2 | |
774 | depends on MEDIA_CAMERA_SUPPORT | |
01b84448 | 775 | select V4L2_FWNODE |
b60a5b8d | 776 | help |
be9543ec | 777 | This is a Video4Linux2 sensor driver for the OmniVision |
cb7a01ac MCC |
778 | OV7670 VGA camera. It currently only works with the M88ALP01 |
779 | controller. | |
780 | ||
39c5c447 WY |
781 | config VIDEO_OV7740 |
782 | tristate "OmniVision OV7740 sensor support" | |
783 | depends on I2C && VIDEO_V4L2 | |
784 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 785 | help |
be9543ec | 786 | This is a Video4Linux2 sensor driver for the OmniVision |
39c5c447 WY |
787 | OV7740 VGA camera sensor. |
788 | ||
879347f0 BK |
789 | config VIDEO_OV8856 |
790 | tristate "OmniVision OV8856 sensor support" | |
791 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
792 | depends on MEDIA_CAMERA_SUPPORT | |
793 | select V4L2_FWNODE | |
794 | help | |
795 | This is a Video4Linux2 sensor driver for the OmniVision | |
796 | OV8856 camera sensor. | |
797 | ||
798 | To compile this driver as a module, choose M here: the | |
799 | module will be called ov8856. | |
800 | ||
57b0ad9e PC |
801 | config VIDEO_OV9640 |
802 | tristate "OmniVision OV9640 sensor support" | |
803 | depends on I2C && VIDEO_V4L2 | |
804 | help | |
805 | This is a Video4Linux2 sensor driver for the OmniVision | |
806 | OV9640 camera sensor. | |
807 | ||
84a15ded SN |
808 | config VIDEO_OV9650 |
809 | tristate "OmniVision OV9650/OV9652 sensor support" | |
810 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
361f3803 | 811 | select REGMAP_SCCB |
b60a5b8d | 812 | help |
be9543ec | 813 | This is a V4L2 sensor driver for the Omnivision |
84a15ded SN |
814 | OV9650 and OV9652 camera sensors. |
815 | ||
5fcf092e HY |
816 | config VIDEO_OV13858 |
817 | tristate "OmniVision OV13858 sensor support" | |
818 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
819 | depends on MEDIA_CAMERA_SUPPORT | |
fce8ba67 | 820 | select V4L2_FWNODE |
b60a5b8d | 821 | help |
be9543ec | 822 | This is a Video4Linux2 sensor driver for the OmniVision |
5fcf092e HY |
823 | OV13858 camera. |
824 | ||
cb7a01ac MCC |
825 | config VIDEO_VS6624 |
826 | tristate "ST VS6624 sensor support" | |
827 | depends on VIDEO_V4L2 && I2C | |
828 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 829 | help |
be9543ec | 830 | This is a Video4Linux2 sensor driver for the ST VS6624 |
cb7a01ac MCC |
831 | camera. |
832 | ||
833 | To compile this driver as a module, choose M here: the | |
834 | module will be called vs6624. | |
835 | ||
f8ce7c35 AM |
836 | config VIDEO_MT9M001 |
837 | tristate "mt9m001 support" | |
73b33860 | 838 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
12d85c3e | 839 | depends on MEDIA_CAMERA_SUPPORT |
f8ce7c35 AM |
840 | help |
841 | This driver supports MT9M001 cameras from Micron, monochrome | |
842 | and colour models. | |
843 | ||
cb7a01ac MCC |
844 | config VIDEO_MT9M032 |
845 | tristate "MT9M032 camera sensor support" | |
846 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
847 | depends on MEDIA_CAMERA_SUPPORT | |
848 | select VIDEO_APTINA_PLL | |
b60a5b8d | 849 | help |
cb7a01ac MCC |
850 | This driver supports MT9M032 camera sensors from Aptina, monochrome |
851 | models only. | |
852 | ||
c61e74e3 RJ |
853 | config VIDEO_MT9M111 |
854 | tristate "mt9m111, mt9m112 and mt9m131 support" | |
855 | depends on I2C && VIDEO_V4L2 | |
98480d65 | 856 | select V4L2_FWNODE |
c61e74e3 RJ |
857 | help |
858 | This driver supports MT9M111, MT9M112 and MT9M131 cameras from | |
859 | Micron/Aptina | |
860 | ||
cb7a01ac MCC |
861 | config VIDEO_MT9P031 |
862 | tristate "Aptina MT9P031 support" | |
863 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
864 | depends on MEDIA_CAMERA_SUPPORT | |
865 | select VIDEO_APTINA_PLL | |
b60a5b8d | 866 | help |
be9543ec | 867 | This is a Video4Linux2 sensor driver for the Aptina |
cb7a01ac MCC |
868 | (Micron) mt9p031 5 Mpixel camera. |
869 | ||
870 | config VIDEO_MT9T001 | |
871 | tristate "Aptina MT9T001 support" | |
872 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
873 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 874 | help |
be9543ec | 875 | This is a Video4Linux2 sensor driver for the Aptina |
cb7a01ac MCC |
876 | (Micron) mt0t001 3 Mpixel camera. |
877 | ||
6a26f141 JM |
878 | config VIDEO_MT9T112 |
879 | tristate "Aptina MT9T111/MT9T112 support" | |
880 | depends on I2C && VIDEO_V4L2 | |
881 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 882 | help |
be9543ec | 883 | This is a Video4Linux2 sensor driver for the Aptina |
6a26f141 JM |
884 | (Micron) MT9T111 and MT9T112 3 Mpixel camera. |
885 | ||
886 | To compile this driver as a module, choose M here: the | |
887 | module will be called mt9t112. | |
888 | ||
cb7a01ac MCC |
889 | config VIDEO_MT9V011 |
890 | tristate "Micron mt9v011 sensor support" | |
891 | depends on I2C && VIDEO_V4L2 | |
892 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 893 | help |
be9543ec | 894 | This is a Video4Linux2 sensor driver for the Micron |
cb7a01ac MCC |
895 | mt0v011 1.3 Mpixel camera. It currently only works with the |
896 | em28xx driver. | |
897 | ||
898 | config VIDEO_MT9V032 | |
899 | tristate "Micron MT9V032 sensor support" | |
900 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
901 | depends on MEDIA_CAMERA_SUPPORT | |
80b44ef2 | 902 | select REGMAP_I2C |
859969b3 | 903 | select V4L2_FWNODE |
b60a5b8d | 904 | help |
be9543ec | 905 | This is a Video4Linux2 sensor driver for the Micron |
cb7a01ac MCC |
906 | MT9V032 752x480 CMOS sensor. |
907 | ||
aab7ed1c JM |
908 | config VIDEO_MT9V111 |
909 | tristate "Aptina MT9V111 sensor support" | |
910 | depends on I2C && VIDEO_V4L2 | |
911 | depends on MEDIA_CAMERA_SUPPORT | |
912 | help | |
913 | This is a Video4Linux2 sensor driver for the Aptina/Micron | |
914 | MT9V111 sensor. | |
915 | ||
916 | To compile this driver as a module, choose M here: the | |
917 | module will be called mt9v111. | |
918 | ||
cb7a01ac MCC |
919 | config VIDEO_SR030PC30 |
920 | tristate "Siliconfile SR030PC30 sensor support" | |
921 | depends on I2C && VIDEO_V4L2 | |
922 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 923 | help |
cb7a01ac MCC |
924 | This driver supports SR030PC30 VGA camera from Siliconfile |
925 | ||
926 | config VIDEO_NOON010PC30 | |
927 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 928 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac | 929 | depends on MEDIA_CAMERA_SUPPORT |
b60a5b8d | 930 | help |
cb7a01ac MCC |
931 | This driver supports NOON010PC30 CIF camera from Siliconfile |
932 | ||
933 | source "drivers/media/i2c/m5mols/Kconfig" | |
934 | ||
8cba1ae6 JM |
935 | config VIDEO_RJ54N1 |
936 | tristate "Sharp RJ54N1CB0C sensor support" | |
937 | depends on I2C && VIDEO_V4L2 | |
938 | depends on MEDIA_CAMERA_SUPPORT | |
939 | help | |
be9543ec | 940 | This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image |
8cba1ae6 JM |
941 | sensor. |
942 | ||
943 | To compile this driver as a module, choose M here: the | |
944 | module will be called rj54n1. | |
945 | ||
cb7a01ac MCC |
946 | config VIDEO_S5K6AA |
947 | tristate "Samsung S5K6AAFX sensor support" | |
948 | depends on MEDIA_CAMERA_SUPPORT | |
949 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
b60a5b8d | 950 | help |
be9543ec | 951 | This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M |
cb7a01ac MCC |
952 | camera sensor with an embedded SoC image signal processor. |
953 | ||
814b4dd9 SN |
954 | config VIDEO_S5K6A3 |
955 | tristate "Samsung S5K6A3 sensor support" | |
956 | depends on MEDIA_CAMERA_SUPPORT | |
957 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
b60a5b8d | 958 | help |
be9543ec | 959 | This is a V4L2 sensor driver for Samsung S5K6A3 raw |
814b4dd9 SN |
960 | camera sensor. |
961 | ||
8b99312b | 962 | config VIDEO_S5K4ECGX |
4a3fad70 MCC |
963 | tristate "Samsung S5K4ECGX sensor support" |
964 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
c739c0a7 | 965 | select CRC32 |
b60a5b8d | 966 | help |
be9543ec | 967 | This is a V4L2 sensor driver for Samsung S5K4ECGX 5M |
4a3fad70 | 968 | camera sensor with an embedded SoC image signal processor. |
8b99312b | 969 | |
7d459937 AH |
970 | config VIDEO_S5K5BAF |
971 | tristate "Samsung S5K5BAF sensor support" | |
972 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
859969b3 | 973 | select V4L2_FWNODE |
b60a5b8d | 974 | help |
be9543ec | 975 | This is a V4L2 sensor driver for Samsung S5K5BAF 2M |
7d459937 AH |
976 | camera sensor with an embedded SoC image signal processor. |
977 | ||
cb7a01ac | 978 | source "drivers/media/i2c/smiapp/Kconfig" |
c5254e72 | 979 | source "drivers/media/i2c/et8ek8/Kconfig" |
cb7a01ac | 980 | |
cac47f18 AH |
981 | config VIDEO_S5C73M3 |
982 | tristate "Samsung S5C73M3 sensor support" | |
983 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
859969b3 | 984 | select V4L2_FWNODE |
b60a5b8d | 985 | help |
be9543ec | 986 | This is a V4L2 sensor driver for Samsung S5C73M3 |
4494f0fd | 987 | 8 Mpixel camera. |
cac47f18 | 988 | |
0d0d87fb SA |
989 | comment "Lens drivers" |
990 | ||
991 | config VIDEO_AD5820 | |
992 | tristate "AD5820 lens voice coil support" | |
993 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
b60a5b8d | 994 | help |
0d0d87fb SA |
995 | This is a driver for the AD5820 camera lens voice coil. |
996 | It is used for example in Nokia N900 (RX-51). | |
997 | ||
998 | config VIDEO_AK7375 | |
999 | tristate "AK7375 lens voice coil support" | |
1000 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1001 | depends on VIDEO_V4L2_SUBDEV_API | |
1002 | help | |
1003 | This is a driver for the AK7375 camera lens voice coil. | |
1004 | AK7375 is a 12 bit DAC with 120mA output current sink | |
1005 | capability. This is designed for linear control of | |
1006 | voice coil motors, controlled via I2C serial interface. | |
1007 | ||
1008 | config VIDEO_DW9714 | |
1009 | tristate "DW9714 lens voice coil support" | |
1010 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1011 | depends on VIDEO_V4L2_SUBDEV_API | |
b60a5b8d | 1012 | help |
0d0d87fb SA |
1013 | This is a driver for the DW9714 camera lens voice coil. |
1014 | DW9714 is a 10 bit DAC with 120mA output current sink | |
1015 | capability. This is designed for linear control of | |
1016 | voice coil motors, controlled via I2C serial interface. | |
1017 | ||
1018 | config VIDEO_DW9807_VCM | |
1019 | tristate "DW9807 lens voice coil support" | |
1020 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1021 | depends on VIDEO_V4L2_SUBDEV_API | |
b60a5b8d | 1022 | help |
0d0d87fb SA |
1023 | This is a driver for the DW9807 camera lens voice coil. |
1024 | DW9807 is a 10 bit DAC with 100mA output current sink | |
1025 | capability. This is designed for linear control of | |
1026 | voice coil motors, controlled via I2C serial interface. | |
1027 | ||
cb7a01ac MCC |
1028 | comment "Flash devices" |
1029 | ||
1030 | config VIDEO_ADP1653 | |
1031 | tristate "ADP1653 flash support" | |
1032 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1033 | depends on MEDIA_CAMERA_SUPPORT | |
b60a5b8d | 1034 | help |
cb7a01ac MCC |
1035 | This is a driver for the ADP1653 flash controller. It is used for |
1036 | example in Nokia N900. | |
1037 | ||
7f6b11a1 DJ |
1038 | config VIDEO_LM3560 |
1039 | tristate "LM3560 dual flash driver support" | |
1040 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1041 | depends on MEDIA_CAMERA_SUPPORT | |
1042 | select REGMAP_I2C | |
b60a5b8d | 1043 | help |
7f6b11a1 DJ |
1044 | This is a driver for the lm3560 dual flash controllers. It controls |
1045 | flash, torch LEDs. | |
1046 | ||
dc76df5d DJ |
1047 | config VIDEO_LM3646 |
1048 | tristate "LM3646 dual flash driver support" | |
1049 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
1050 | depends on MEDIA_CAMERA_SUPPORT | |
1051 | select REGMAP_I2C | |
b60a5b8d | 1052 | help |
dc76df5d DJ |
1053 | This is a driver for the lm3646 dual flash controllers. It controls |
1054 | flash, torch LEDs. | |
1055 | ||
cb7a01ac MCC |
1056 | comment "Video improvement chips" |
1057 | ||
1058 | config VIDEO_UPD64031A | |
1059 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
1060 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 1061 | help |
cb7a01ac MCC |
1062 | Support for the NEC Electronics uPD64031A Ghost Reduction |
1063 | video chip. It is most often found in NTSC TV cards made for | |
1064 | Japan and is used to reduce the 'ghosting' effect that can | |
1065 | be present in analog TV broadcasts. | |
1066 | ||
1067 | To compile this driver as a module, choose M here: the | |
1068 | module will be called upd64031a. | |
1069 | ||
1070 | config VIDEO_UPD64083 | |
1071 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
1072 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 1073 | help |
cb7a01ac MCC |
1074 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C |
1075 | separation video chip. It is used to improve the quality of | |
1076 | the colors of a composite signal. | |
1077 | ||
1078 | To compile this driver as a module, choose M here: the | |
1079 | module will be called upd64083. | |
1080 | ||
6052ba35 HV |
1081 | comment "Audio/Video compression chips" |
1082 | ||
1083 | config VIDEO_SAA6752HS | |
1084 | tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
1085 | depends on VIDEO_V4L2 && I2C | |
d984d325 | 1086 | select CRC32 |
b60a5b8d | 1087 | help |
6052ba35 HV |
1088 | Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 |
1089 | audio encoder with multiplexer. | |
1090 | ||
1091 | To compile this driver as a module, choose M here: the | |
1092 | module will be called saa6752hs. | |
1093 | ||
b47b79d8 RS |
1094 | comment "SDR tuner chips" |
1095 | ||
1096 | config SDR_MAX2175 | |
1097 | tristate "Maxim 2175 RF to Bits tuner" | |
1098 | depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C | |
b60a5b8d | 1099 | help |
b47b79d8 RS |
1100 | Support for Maxim 2175 tuner. It is an advanced analog/digital |
1101 | radio receiver with RF-to-Bits front-end designed for SDR solutions. | |
1102 | ||
1103 | To compile this driver as a module, choose M here; the | |
1104 | module will be called max2175. | |
1105 | ||
8c88126b | 1106 | comment "Miscellaneous helper chips" |
cb7a01ac MCC |
1107 | |
1108 | config VIDEO_THS7303 | |
88da0183 LP |
1109 | tristate "THS7303/53 Video Amplifier" |
1110 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 1111 | help |
88da0183 | 1112 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
1113 | |
1114 | To compile this driver as a module, choose M here: the | |
1115 | module will be called ths7303. | |
1116 | ||
1117 | config VIDEO_M52790 | |
1118 | tristate "Mitsubishi M52790 A/V switch" | |
1119 | depends on VIDEO_V4L2 && I2C | |
b60a5b8d | 1120 | help |
cb7a01ac MCC |
1121 | Support for the Mitsubishi M52790 A/V switch. |
1122 | ||
1123 | To compile this driver as a module, choose M here: the | |
1124 | module will be called m52790. | |
5cebaac6 MR |
1125 | |
1126 | config VIDEO_I2C | |
1127 | tristate "I2C transport video support" | |
1128 | depends on VIDEO_V4L2 && I2C | |
1129 | select VIDEOBUF2_VMALLOC | |
acbea679 | 1130 | imply HWMON |
b60a5b8d | 1131 | help |
5cebaac6 MR |
1132 | Enable the I2C transport video support which supports the |
1133 | following: | |
1134 | * Panasonic AMG88xx Grid-Eye Sensors | |
8866cfbf | 1135 | * Melexis MLX90640 Thermal Cameras |
5cebaac6 MR |
1136 | |
1137 | To compile this driver as a module, choose M here: the | |
1138 | module will be called video-i2c | |
1139 | ||
642bb5e8 MG |
1140 | config VIDEO_ST_MIPID02 |
1141 | tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" | |
1142 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
1143 | depends on MEDIA_CAMERA_SUPPORT | |
1144 | select V4L2_FWNODE | |
1145 | help | |
1146 | Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge. | |
1147 | It is used to allow usage of CSI-2 sensor with PARALLEL port | |
1148 | controller. | |
1149 | ||
1150 | To compile this driver as a module, choose M here: the | |
1151 | module will be called st-mipid02. | |
1152 | ||
fccea74f | 1153 | endmenu |
e9d2f057 | 1154 | |
cb7a01ac | 1155 | endif |