[linux-2.6-block.git] / drivers / media / dvb / frontends / stb0899_drv.h

/*
	STB0899 Multistandard Frontend driver
	Copyright (C) Manu Abraham (abraham.manu@gmail.com)

	Copyright (C) ST Microelectronics

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#ifndef __STB0899_DRV_H
#define __STB0899_DRV_H

#include <linux/kernel.h>
#include <linux/module.h>

#include "dvb_frontend.h"

#define STB0899_TSMODE_SERIAL		1
#define STB0899_CLKPOL_FALLING		2
#define STB0899_CLKNULL_PARITY		3
#define STB0899_SYNC_FORCED		4
#define STB0899_FECMODE_DSS		5

struct stb0899_s1_reg {
	u16	address;
	u8	data;
};

struct stb0899_s2_reg {
	u16	offset;
	u32	base_address;
	u32	data;
};

enum stb0899_inversion {
	IQ_SWAP_OFF	= 0,
	IQ_SWAP_ON,
	IQ_SWAP_AUTO
};

#define STB0899_GPIO00				0xf140
#define STB0899_GPIO01				0xf141
#define STB0899_GPIO02				0xf142
#define STB0899_GPIO03				0xf143
#define STB0899_GPIO04				0xf144
#define STB0899_GPIO05				0xf145
#define STB0899_GPIO06				0xf146
#define STB0899_GPIO07				0xf147
#define STB0899_GPIO08				0xf148
#define STB0899_GPIO09				0xf149
#define STB0899_GPIO10				0xf14a
#define STB0899_GPIO11				0xf14b
#define STB0899_GPIO12				0xf14c
#define STB0899_GPIO13				0xf14d
#define STB0899_GPIO14				0xf14e
#define STB0899_GPIO15				0xf14f
#define STB0899_GPIO16				0xf150
#define STB0899_GPIO17				0xf151
#define STB0899_GPIO18				0xf152
#define STB0899_GPIO19				0xf153
#define STB0899_GPIO20				0xf154

#define STB0899_GPIOPULLUP			0x01 /* Output device is connected to Vdd */
#define STB0899_GPIOPULLDN			0x00 /* Output device is connected to Vss */

#define STB0899_POSTPROC_GPIO_POWER		0x00
#define STB0899_POSTPROC_GPIO_LOCK		0x01

/*
 * Post process output configuration control
 * 1. POWER ON/OFF		(index 0)
 * 2. FE_HAS_LOCK/LOCK_LOSS	(index 1)
 *
 * @gpio 	= one of the above listed GPIO's
 * @level	= output state: pulled up or low
 */
struct stb0899_postproc {
	u16	gpio;
	u8	level;
};

struct stb0899_config {
	const struct stb0899_s1_reg	*init_dev;
	const struct stb0899_s2_reg	*init_s2_demod;
	const struct stb0899_s1_reg	*init_s1_demod;
	const struct stb0899_s2_reg	*init_s2_fec;
	const struct stb0899_s1_reg	*init_tst;

	const struct stb0899_postproc	*postproc;

	enum stb0899_inversion		inversion;

	u32	xtal_freq;

	u8	demod_address;
	u8	ts_output_mode;
	u8	block_sync_mode;
	u8	ts_pfbit_toggle;

	u8	clock_polarity;
	u8	data_clk_parity;
	u8	fec_mode;
	u8	data_output_ctl;
	u8	data_fifo_mode;
	u8	out_rate_comp;
	u8	i2c_repeater;
//	int	inversion;
	int	lo_clk;
	int	hi_clk;

	u32	esno_ave;
	u32	esno_quant;
	u32	avframes_coarse;
	u32	avframes_fine;
	u32	miss_threshold;
	u32	uwp_threshold_acq;
	u32	uwp_threshold_track;
	u32	uwp_threshold_sof;
	u32	sof_search_timeout;

	u32	btr_nco_bits;
	u32	btr_gain_shift_offset;
	u32	crl_nco_bits;
	u32	ldpc_max_iter;

	int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency);
	int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency);
	int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
	int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
	int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain);
};

#if defined(CONFIG_DVB_STB0899) || (defined(CONFIG_DVB_STB0899_MODULE) && defined(MODULE))

extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
					   struct i2c_adapter *i2c);

#else

static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
						  struct i2c_adapter *i2c)
{
	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
	return NULL;
}

#endif //CONFIG_DVB_STB0899


#endif
Commit	Line	Data
8bd135ba MA	1	/*
	2	STB0899 Multistandard Frontend driver
	3	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
	4
	5	Copyright (C) ST Microelectronics
	6
	7	This program is free software; you can redistribute it and/or modify
	8	it under the terms of the GNU General Public License as published by
	9	the Free Software Foundation; either version 2 of the License, or
	10	(at your option) any later version.
	11
	12	This program is distributed in the hope that it will be useful,
	13	but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	GNU General Public License for more details.
	16
	17	You should have received a copy of the GNU General Public License
	18	along with this program; if not, write to the Free Software
	19	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	20	*/
	21
	22	#ifndef __STB0899_DRV_H
	23	#define __STB0899_DRV_H
	24
	25	#include <linux/kernel.h>
	26	#include <linux/module.h>
	27
	28	#include "dvb_frontend.h"
	29
	30	#define STB0899_TSMODE_SERIAL 1
	31	#define STB0899_CLKPOL_FALLING 2
	32	#define STB0899_CLKNULL_PARITY 3
	33	#define STB0899_SYNC_FORCED 4
	34	#define STB0899_FECMODE_DSS 5
	35
	36	struct stb0899_s1_reg {
	37	u16 address;
	38	u8 data;
	39	};
	40
	41	struct stb0899_s2_reg {
	42	u16 offset;
	43	u32 base_address;
	44	u32 data;
	45	};
	46
ecdec311 MA	47	enum stb0899_inversion {
	48	IQ_SWAP_OFF = 0,
	49	IQ_SWAP_ON,
	50	IQ_SWAP_AUTO
	51	};
	52
b168e351 MA	53	#define STB0899_GPIO00 0xf140
	54	#define STB0899_GPIO01 0xf141
	55	#define STB0899_GPIO02 0xf142
	56	#define STB0899_GPIO03 0xf143
	57	#define STB0899_GPIO04 0xf144
	58	#define STB0899_GPIO05 0xf145
	59	#define STB0899_GPIO06 0xf146
	60	#define STB0899_GPIO07 0xf147
	61	#define STB0899_GPIO08 0xf148
	62	#define STB0899_GPIO09 0xf149
	63	#define STB0899_GPIO10 0xf14a
	64	#define STB0899_GPIO11 0xf14b
	65	#define STB0899_GPIO12 0xf14c
	66	#define STB0899_GPIO13 0xf14d
	67	#define STB0899_GPIO14 0xf14e
	68	#define STB0899_GPIO15 0xf14f
	69	#define STB0899_GPIO16 0xf150
	70	#define STB0899_GPIO17 0xf151
	71	#define STB0899_GPIO18 0xf152
	72	#define STB0899_GPIO19 0xf153
	73	#define STB0899_GPIO20 0xf154
	74
	75	#define STB0899_GPIOPULLUP 0x01 /* Output device is connected to Vdd */
	76	#define STB0899_GPIOPULLDN 0x00 /* Output device is connected to Vss */
	77
	78	#define STB0899_POSTPROC_GPIO_POWER 0x00
	79	#define STB0899_POSTPROC_GPIO_LOCK 0x01
	80
	81	/*
	82	* Post process output configuration control
	83	* 1. POWER ON/OFF (index 0)
	84	* 2. FE_HAS_LOCK/LOCK_LOSS (index 1)
	85	*
	86	* @gpio = one of the above listed GPIO's
	87	* @level = output state: pulled up or low
	88	*/
	89	struct stb0899_postproc {
	90	u16 gpio;
	91	u8 level;
	92	};
	93
8bd135ba MA	94	struct stb0899_config {
	95	const struct stb0899_s1_reg *init_dev;
	96	const struct stb0899_s2_reg *init_s2_demod;
	97	const struct stb0899_s1_reg *init_s1_demod;
	98	const struct stb0899_s2_reg *init_s2_fec;
	99	const struct stb0899_s1_reg *init_tst;
	100
b168e351 MA	101	const struct stb0899_postproc *postproc;
b168e351 MA	102
ecdec311 MA	103	enum stb0899_inversion inversion;
ecdec311 MA	104
8bd135ba MA	105	u32 xtal_freq;
	106
	107	u8 demod_address;
	108	u8 ts_output_mode;
	109	u8 block_sync_mode;
	110	u8 ts_pfbit_toggle;
	111
	112	u8 clock_polarity;
	113	u8 data_clk_parity;
	114	u8 fec_mode;
	115	u8 data_output_ctl;
	116	u8 data_fifo_mode;
	117	u8 out_rate_comp;
	118	u8 i2c_repeater;
ecdec311	119	// int inversion;
b91a7cb0 MA	120	int lo_clk;
b91a7cb0 MA	121	int hi_clk;
8bd135ba MA	122
	123	u32 esno_ave;
	124	u32 esno_quant;
	125	u32 avframes_coarse;
	126	u32 avframes_fine;
	127	u32 miss_threshold;
	128	u32 uwp_threshold_acq;
	129	u32 uwp_threshold_track;
	130	u32 uwp_threshold_sof;
	131	u32 sof_search_timeout;
	132
	133	u32 btr_nco_bits;
	134	u32 btr_gain_shift_offset;
	135	u32 crl_nco_bits;
	136	u32 ldpc_max_iter;
	137
	138	int (tuner_set_frequency)(struct dvb_frontend fe, u32 frequency);
	139	int (tuner_get_frequency)(struct dvb_frontend fe, u32 *frequency);
	140	int (tuner_set_bandwidth)(struct dvb_frontend fe, u32 bandwidth);
	141	int (tuner_get_bandwidth)(struct dvb_frontend fe, u32 *bandwidth);
	142	int (tuner_set_rfsiggain)(struct dvb_frontend fe, u32 rf_gain);
	143	};
	144
ae9902da MA	145	#if defined(CONFIG_DVB_STB0899) \|\| (defined(CONFIG_DVB_STB0899_MODULE) && defined(MODULE))
	146
	147	extern struct dvb_frontend stb0899_attach(struct stb0899_config config,
	148	struct i2c_adapter *i2c);
	149
	150	#else
	151
	152	static inline struct dvb_frontend stb0899_attach(struct stb0899_config config,
	153	struct i2c_adapter *i2c)
	154	{
	155	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
	156	return NULL;
	157	}
	158
	159	#endif //CONFIG_DVB_STB0899
	160
8bd135ba MA	161
8bd135ba MA	162	#endif