Commit | Line | Data |
---|---|---|
a75763ff PB |
1 | /* |
2 | * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC). | |
3 | * | |
4 | * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/) | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or | |
7 | * modify it under the terms of the GNU General Public License as | |
8 | * published by the Free Software Foundation, version 2. | |
9 | */ | |
10 | #include <linux/kernel.h> | |
11 | #include <linux/i2c.h> | |
12 | ||
13 | #include "dvb_frontend.h" | |
14 | ||
15 | #include "dib7000p.h" | |
16 | ||
17 | static int debug; | |
18 | module_param(debug, int, 0644); | |
19 | MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); | |
20 | ||
21 | #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0) | |
22 | ||
23 | struct dib7000p_state { | |
24 | struct dvb_frontend demod; | |
25 | struct dib7000p_config cfg; | |
26 | ||
27 | u8 i2c_addr; | |
28 | struct i2c_adapter *i2c_adap; | |
29 | ||
30 | struct dibx000_i2c_master i2c_master; | |
31 | ||
32 | u16 wbd_ref; | |
33 | ||
34 | u8 current_band; | |
35 | fe_bandwidth_t current_bandwidth; | |
36 | struct dibx000_agc_config *current_agc; | |
37 | u32 timf; | |
38 | ||
39 | u16 gpio_dir; | |
40 | u16 gpio_val; | |
41 | }; | |
42 | ||
43 | enum dib7000p_power_mode { | |
44 | DIB7000P_POWER_ALL = 0, | |
45 | DIB7000P_POWER_INTERFACE_ONLY, | |
46 | }; | |
47 | ||
48 | static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg) | |
49 | { | |
50 | u8 wb[2] = { reg >> 8, reg & 0xff }; | |
51 | u8 rb[2]; | |
52 | struct i2c_msg msg[2] = { | |
53 | { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 }, | |
54 | { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 }, | |
55 | }; | |
56 | ||
57 | if (i2c_transfer(state->i2c_adap, msg, 2) != 2) | |
58 | dprintk("i2c read error on %d\n",reg); | |
59 | ||
60 | return (rb[0] << 8) | rb[1]; | |
61 | } | |
62 | ||
63 | static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val) | |
64 | { | |
65 | u8 b[4] = { | |
66 | (reg >> 8) & 0xff, reg & 0xff, | |
67 | (val >> 8) & 0xff, val & 0xff, | |
68 | }; | |
69 | struct i2c_msg msg = { | |
70 | .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4 | |
71 | }; | |
72 | return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; | |
73 | } | |
74 | static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode) | |
75 | { | |
76 | int ret = 0; | |
77 | u16 outreg, fifo_threshold, smo_mode; | |
78 | ||
79 | outreg = 0; | |
80 | fifo_threshold = 1792; | |
81 | smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1); | |
82 | ||
83 | dprintk("-I- Setting output mode for demod %p to %d\n", | |
84 | &state->demod, mode); | |
85 | ||
86 | switch (mode) { | |
87 | case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock | |
88 | outreg = (1 << 10); /* 0x0400 */ | |
89 | break; | |
90 | case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock | |
91 | outreg = (1 << 10) | (1 << 6); /* 0x0440 */ | |
92 | break; | |
93 | case OUTMODE_MPEG2_SERIAL: // STBs with serial input | |
94 | outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */ | |
95 | break; | |
96 | case OUTMODE_DIVERSITY: | |
97 | if (state->cfg.hostbus_diversity) | |
98 | outreg = (1 << 10) | (4 << 6); /* 0x0500 */ | |
99 | else | |
100 | outreg = (1 << 11); | |
101 | break; | |
102 | case OUTMODE_MPEG2_FIFO: // e.g. USB feeding | |
103 | smo_mode |= (3 << 1); | |
104 | fifo_threshold = 512; | |
105 | outreg = (1 << 10) | (5 << 6); | |
106 | break; | |
107 | case OUTMODE_HIGH_Z: // disable | |
108 | outreg = 0; | |
109 | break; | |
110 | default: | |
111 | dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod); | |
112 | break; | |
113 | } | |
114 | ||
115 | if (state->cfg.output_mpeg2_in_188_bytes) | |
116 | smo_mode |= (1 << 5) ; | |
117 | ||
118 | ret |= dib7000p_write_word(state, 235, smo_mode); | |
119 | ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */ | |
120 | ret |= dib7000p_write_word(state, 1286, outreg); /* P_Div_active */ | |
121 | ||
122 | return ret; | |
123 | } | |
124 | ||
125 | static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode) | |
126 | { | |
127 | /* by default everything is powered off */ | |
128 | u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003, | |
129 | reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff); | |
130 | ||
131 | /* now, depending on the requested mode, we power on */ | |
132 | switch (mode) { | |
133 | /* power up everything in the demod */ | |
134 | case DIB7000P_POWER_ALL: | |
135 | reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff; | |
136 | break; | |
137 | /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */ | |
138 | case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */ | |
139 | reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10)); | |
140 | break; | |
141 | /* TODO following stuff is just converted from the dib7000-driver - check when is used what */ | |
142 | } | |
143 | ||
144 | dib7000p_write_word(state, 774, reg_774); | |
145 | dib7000p_write_word(state, 775, reg_775); | |
146 | dib7000p_write_word(state, 776, reg_776); | |
147 | dib7000p_write_word(state, 899, reg_899); | |
148 | dib7000p_write_word(state, 1280, reg_1280); | |
149 | ||
150 | return 0; | |
151 | } | |
152 | ||
153 | static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no) | |
154 | { | |
155 | u16 reg_908 = dib7000p_read_word(state, 908), | |
156 | reg_909 = dib7000p_read_word(state, 909); | |
157 | ||
158 | switch (no) { | |
159 | case DIBX000_SLOW_ADC_ON: | |
160 | reg_909 |= (1 << 1) | (1 << 0); | |
161 | dib7000p_write_word(state, 909, reg_909); | |
162 | reg_909 &= ~(1 << 1); | |
163 | break; | |
164 | ||
165 | case DIBX000_SLOW_ADC_OFF: | |
166 | reg_909 |= (1 << 1) | (1 << 0); | |
167 | break; | |
168 | ||
169 | case DIBX000_ADC_ON: | |
170 | reg_908 &= 0x0fff; | |
171 | reg_909 &= 0x0003; | |
172 | break; | |
173 | ||
174 | case DIBX000_ADC_OFF: // leave the VBG voltage on | |
175 | reg_908 |= (1 << 14) | (1 << 13) | (1 << 12); | |
176 | reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); | |
177 | break; | |
178 | ||
179 | case DIBX000_VBG_ENABLE: | |
180 | reg_908 &= ~(1 << 15); | |
181 | break; | |
182 | ||
183 | case DIBX000_VBG_DISABLE: | |
184 | reg_908 |= (1 << 15); | |
185 | break; | |
186 | ||
187 | default: | |
188 | break; | |
189 | } | |
190 | ||
191 | // dprintk("908: %x, 909: %x\n", reg_908, reg_909); | |
192 | ||
193 | dib7000p_write_word(state, 908, reg_908); | |
194 | dib7000p_write_word(state, 909, reg_909); | |
195 | } | |
196 | ||
197 | static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx) | |
198 | { | |
199 | struct dib7000p_state *state = demod->demodulator_priv; | |
200 | u32 timf; | |
201 | ||
202 | // store the current bandwidth for later use | |
203 | state->current_bandwidth = BW_Idx; | |
204 | ||
205 | if (state->timf == 0) { | |
206 | dprintk("-D- Using default timf\n"); | |
207 | timf = state->cfg.bw->timf; | |
208 | } else { | |
209 | dprintk("-D- Using updated timf\n"); | |
210 | timf = state->timf; | |
211 | } | |
212 | ||
213 | timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80; | |
214 | ||
215 | dprintk("timf: %d\n",timf); | |
216 | ||
217 | dib7000p_write_word(state, 23, (timf >> 16) & 0xffff); | |
218 | dib7000p_write_word(state, 24, (timf ) & 0xffff); | |
219 | ||
220 | return 0; | |
221 | } | |
222 | ||
223 | static int dib7000p_sad_calib(struct dib7000p_state *state) | |
224 | { | |
225 | /* internal */ | |
beb7dd86 | 226 | // dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth |
a75763ff PB |
227 | dib7000p_write_word(state, 73, (0 << 1) | (0 << 0)); |
228 | dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096 | |
229 | ||
230 | /* do the calibration */ | |
231 | dib7000p_write_word(state, 73, (1 << 0)); | |
232 | dib7000p_write_word(state, 73, (0 << 0)); | |
233 | ||
234 | msleep(1); | |
235 | ||
236 | return 0; | |
237 | } | |
238 | ||
239 | static void dib7000p_reset_pll(struct dib7000p_state *state) | |
240 | { | |
241 | struct dibx000_bandwidth_config *bw = &state->cfg.bw[0]; | |
242 | ||
243 | dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset); | |
244 | dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) | | |
245 | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0)); | |
246 | ||
247 | dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff); | |
248 | dib7000p_write_word(state, 19, (bw->internal*1000 ) & 0xffff); | |
249 | dib7000p_write_word(state, 21, (bw->ifreq >> 16) & 0xffff); | |
250 | dib7000p_write_word(state, 22, (bw->ifreq ) & 0xffff); | |
251 | ||
252 | dib7000p_write_word(state, 72, bw->sad_cfg); | |
253 | } | |
254 | ||
255 | static int dib7000p_reset_gpio(struct dib7000p_state *st) | |
256 | { | |
257 | /* reset the GPIOs */ | |
258 | dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos); | |
259 | ||
260 | dib7000p_write_word(st, 1029, st->gpio_dir); | |
261 | dib7000p_write_word(st, 1030, st->gpio_val); | |
262 | ||
263 | /* TODO 1031 is P_gpio_od */ | |
264 | ||
265 | dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos); | |
266 | ||
267 | dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div); | |
268 | return 0; | |
269 | } | |
270 | ||
271 | static int dib7000p_demod_reset(struct dib7000p_state *state) | |
272 | { | |
273 | dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
274 | ||
275 | dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE); | |
276 | ||
277 | /* restart all parts */ | |
278 | dib7000p_write_word(state, 770, 0xffff); | |
279 | dib7000p_write_word(state, 771, 0xffff); | |
280 | dib7000p_write_word(state, 772, 0x001f); | |
281 | dib7000p_write_word(state, 898, 0x0003); | |
282 | /* except i2c, sdio, gpio - control interfaces */ | |
283 | dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) ); | |
284 | ||
285 | dib7000p_write_word(state, 770, 0); | |
286 | dib7000p_write_word(state, 771, 0); | |
287 | dib7000p_write_word(state, 772, 0); | |
288 | dib7000p_write_word(state, 898, 0); | |
289 | dib7000p_write_word(state, 1280, 0); | |
290 | ||
291 | /* default */ | |
292 | dib7000p_reset_pll(state); | |
293 | ||
294 | if (dib7000p_reset_gpio(state) != 0) | |
295 | dprintk("-E- GPIO reset was not successful.\n"); | |
296 | ||
297 | if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0) | |
298 | dprintk("-E- OUTPUT_MODE could not be resetted.\n"); | |
299 | ||
300 | /* unforce divstr regardless whether i2c enumeration was done or not */ | |
301 | dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) ); | |
302 | ||
303 | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); | |
304 | ||
305 | return 0; | |
306 | } | |
307 | ||
308 | static void dib7000p_restart_agc(struct dib7000p_state *state) | |
309 | { | |
310 | // P_restart_iqc & P_restart_agc | |
311 | dib7000p_write_word(state, 770, 0x0c00); | |
312 | dib7000p_write_word(state, 770, 0x0000); | |
313 | } | |
314 | ||
315 | static void dib7000p_update_lna(struct dib7000p_state *state) | |
316 | { | |
317 | int i; | |
318 | u16 dyn_gain; | |
319 | ||
320 | // when there is no LNA to program return immediatly | |
321 | if (state->cfg.update_lna == NULL) | |
322 | return; | |
323 | ||
324 | for (i = 0; i < 5; i++) { | |
325 | // read dyn_gain here (because it is demod-dependent and not tuner) | |
326 | dyn_gain = dib7000p_read_word(state, 394); | |
327 | ||
328 | if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed | |
329 | dib7000p_restart_agc(state); | |
330 | msleep(5); | |
331 | } else | |
332 | break; | |
333 | } | |
334 | } | |
335 | ||
336 | static void dib7000p_pll_clk_cfg(struct dib7000p_state *state) | |
337 | { | |
338 | u16 tmp = 0; | |
339 | tmp = dib7000p_read_word(state, 903); | |
340 | dib7000p_write_word(state, 903, (tmp | 0x1)); //pwr-up pll | |
341 | tmp = dib7000p_read_word(state, 900); | |
342 | dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); //use High freq clock | |
343 | } | |
344 | ||
345 | static void dib7000p_update_timf_freq(struct dib7000p_state *state) | |
346 | { | |
347 | u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428); | |
348 | state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100); | |
349 | dib7000p_write_word(state, 23, (u16) (timf >> 16)); | |
350 | dib7000p_write_word(state, 24, (u16) (timf & 0xffff)); | |
351 | dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf); | |
352 | } | |
353 | ||
354 | static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq) | |
355 | { | |
356 | u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208; | |
357 | ||
358 | /* nfft, guard, qam, alpha */ | |
359 | dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha)); | |
360 | dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */ | |
361 | ||
362 | /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */ | |
363 | tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1); | |
364 | if (ch->vit_hrch == 0 || ch->vit_select_hp == 1) | |
365 | tmp |= (ch->vit_code_rate_hp << 1); | |
366 | else | |
367 | tmp |= (ch->vit_code_rate_lp << 1); | |
368 | dib7000p_write_word(state, 208, tmp); | |
369 | ||
370 | /* P_dvsy_sync_wait */ | |
371 | switch (ch->nfft) { | |
372 | case 1: tmp = 256; break; | |
373 | case 2: tmp = 128; break; | |
374 | case 0: | |
375 | default: tmp = 64; break; | |
376 | } | |
377 | tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin | |
378 | tmp <<= 4; | |
379 | ||
380 | /* deactive the possibility of diversity reception if extended interleave */ | |
381 | /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */ | |
382 | if (ch->intlv_native || ch->nfft == 1) | |
383 | tmp |= (1 << 2) | (2 << 0); | |
384 | dib7000p_write_word(state, 207, tmp); | |
385 | ||
386 | dib7000p_write_word(state, 26, 0x6680); // timf(6xxx) | |
387 | dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073 | |
388 | dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3) | |
389 | dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5) | |
390 | ||
391 | /* channel estimation fine configuration */ | |
392 | switch (ch->nqam) { | |
393 | case 2: | |
394 | est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ | |
395 | est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ | |
396 | est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ | |
397 | est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ | |
398 | break; | |
399 | case 1: | |
400 | est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ | |
401 | est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ | |
402 | est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ | |
403 | est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ | |
404 | break; | |
405 | default: | |
406 | est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ | |
407 | est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ | |
408 | est[2] = 0x0333; /* P_adp_regul_ext 0.1 */ | |
409 | est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ | |
410 | break; | |
411 | } | |
412 | for (tmp = 0; tmp < 4; tmp++) | |
413 | dib7000p_write_word(state, 187 + tmp, est[tmp]); | |
414 | ||
415 | // set power-up level: interf+analog+AGC | |
416 | dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
417 | dib7000p_set_adc_state(state, DIBX000_ADC_ON); | |
418 | dib7000p_pll_clk_cfg(state); | |
419 | msleep(7); | |
420 | ||
421 | // AGC initialization | |
422 | if (state->cfg.agc_control) | |
423 | state->cfg.agc_control(&state->demod, 1); | |
424 | ||
425 | dib7000p_restart_agc(state); | |
426 | ||
427 | // wait AGC rough lock time | |
428 | msleep(5); | |
429 | ||
430 | dib7000p_update_lna(state); | |
431 | ||
432 | // wait AGC accurate lock time | |
433 | msleep(7); | |
434 | if (state->cfg.agc_control) | |
435 | state->cfg.agc_control(&state->demod, 0); | |
436 | } | |
437 | ||
438 | static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch) | |
439 | { | |
440 | struct dib7000p_state *state = demod->demodulator_priv; | |
441 | struct dibx000_ofdm_channel auto_ch; | |
442 | u32 value; | |
443 | ||
444 | INIT_OFDM_CHANNEL(&auto_ch); | |
445 | auto_ch.RF_kHz = ch->RF_kHz; | |
446 | auto_ch.Bw = ch->Bw; | |
447 | auto_ch.nqam = 2; | |
448 | auto_ch.guard = 0; | |
449 | auto_ch.nfft = 1; | |
450 | auto_ch.vit_alpha = 1; | |
451 | auto_ch.vit_select_hp = 1; | |
452 | auto_ch.vit_code_rate_hp = 2; | |
453 | auto_ch.vit_code_rate_lp = 3; | |
454 | auto_ch.vit_hrch = 0; | |
455 | auto_ch.intlv_native = 1; | |
456 | ||
457 | dib7000p_set_channel(state, &auto_ch, 7); | |
458 | ||
459 | // always use the setting for 8MHz here lock_time for 7,6 MHz are longer | |
460 | value = 30 * state->cfg.bw->internal; | |
461 | dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time | |
462 | dib7000p_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time | |
463 | value = 100 * state->cfg.bw->internal; | |
464 | dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time | |
465 | dib7000p_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time | |
466 | value = 500 * state->cfg.bw->internal; | |
467 | dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time | |
468 | dib7000p_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time | |
469 | ||
470 | value = dib7000p_read_word(state, 0); | |
471 | dib7000p_write_word(state, 0, (1 << 9) | value); | |
472 | dib7000p_read_word(state, 1284); | |
473 | dib7000p_write_word(state, 0, (u16) value); | |
474 | ||
475 | return 0; | |
476 | } | |
477 | ||
478 | static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod) | |
479 | { | |
480 | struct dib7000p_state *state = demod->demodulator_priv; | |
481 | u16 irq_pending = dib7000p_read_word(state, 1284); | |
482 | ||
483 | if (irq_pending & 0x1) // failed | |
484 | return 1; | |
485 | ||
486 | if (irq_pending & 0x2) // succeeded | |
487 | return 2; | |
488 | ||
489 | return 0; // still pending | |
490 | } | |
491 | ||
492 | static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch) | |
493 | { | |
494 | struct dib7000p_state *state = demod->demodulator_priv; | |
495 | u16 tmp = 0; | |
496 | ||
497 | if (ch != NULL) | |
498 | dib7000p_set_channel(state, ch, 0); | |
499 | else | |
500 | return -EINVAL; | |
501 | ||
502 | // restart demod | |
503 | dib7000p_write_word(state, 770, 0x4000); | |
504 | dib7000p_write_word(state, 770, 0x0000); | |
505 | msleep(45); | |
506 | ||
507 | /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */ | |
508 | dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3)); | |
509 | ||
510 | // never achieved a lock with that bandwidth so far - wait for osc-freq to update | |
511 | if (state->timf == 0) | |
512 | msleep(200); | |
513 | ||
514 | /* offset loop parameters */ | |
515 | ||
516 | /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */ | |
517 | tmp = (6 << 8) | 0x80; | |
518 | switch (ch->nfft) { | |
519 | case 0: tmp |= (7 << 12); break; | |
520 | case 1: tmp |= (9 << 12); break; | |
521 | case 2: tmp |= (8 << 12); break; | |
522 | } | |
523 | dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */ | |
524 | ||
525 | /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */ | |
526 | tmp = (0 << 4); | |
527 | switch (ch->nfft) { | |
528 | case 0: tmp |= 0x6; break; | |
529 | case 1: tmp |= 0x8; break; | |
530 | case 2: tmp |= 0x7; break; | |
531 | } | |
532 | dib7000p_write_word(state, 32, tmp); | |
533 | ||
534 | /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */ | |
535 | tmp = (0 << 4); | |
536 | switch (ch->nfft) { | |
537 | case 0: tmp |= 0x6; break; | |
538 | case 1: tmp |= 0x8; break; | |
539 | case 2: tmp |= 0x7; break; | |
540 | } | |
541 | dib7000p_write_word(state, 33, tmp); | |
542 | ||
543 | tmp = dib7000p_read_word(state,509); | |
544 | if (!((tmp >> 6) & 0x1)) { | |
545 | /* restart the fec */ | |
546 | tmp = dib7000p_read_word(state,771); | |
547 | dib7000p_write_word(state, 771, tmp | (1 << 1)); | |
548 | dib7000p_write_word(state, 771, tmp); | |
549 | msleep(10); | |
550 | tmp = dib7000p_read_word(state,509); | |
551 | } | |
552 | ||
553 | // we achieved a lock - it's time to update the osc freq | |
554 | if ((tmp >> 6) & 0x1) | |
555 | dib7000p_update_timf_freq(state); | |
556 | ||
557 | return 0; | |
558 | } | |
559 | ||
560 | static int dib7000p_init(struct dvb_frontend *demod) | |
561 | { | |
562 | struct dibx000_agc_config *agc; | |
563 | struct dib7000p_state *state = demod->demodulator_priv; | |
564 | int ret = 0; | |
565 | ||
566 | // Demodulator default configuration | |
567 | agc = state->cfg.agc; | |
568 | ||
569 | dib7000p_set_power_mode(state, DIB7000P_POWER_ALL); | |
570 | dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON); | |
571 | ||
572 | /* AGC */ | |
573 | ret |= dib7000p_write_word(state, 75 , agc->setup ); | |
574 | ret |= dib7000p_write_word(state, 76 , agc->inv_gain ); | |
575 | ret |= dib7000p_write_word(state, 77 , agc->time_stabiliz ); | |
576 | ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock); | |
577 | ||
578 | // Demod AGC loop configuration | |
579 | ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp); | |
580 | ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp); | |
581 | ||
582 | /* AGC continued */ | |
583 | dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n", | |
584 | state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); | |
585 | ||
586 | if (state->wbd_ref != 0) | |
587 | ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref); | |
588 | else | |
589 | ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref); | |
590 | ||
591 | ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) ); | |
592 | ||
593 | ret |= dib7000p_write_word(state, 107, agc->agc1_max); | |
594 | ret |= dib7000p_write_word(state, 108, agc->agc1_min); | |
595 | ret |= dib7000p_write_word(state, 109, agc->agc2_max); | |
596 | ret |= dib7000p_write_word(state, 110, agc->agc2_min); | |
597 | ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 ); | |
598 | ret |= dib7000p_write_word(state, 112, agc->agc1_pt3); | |
599 | ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); | |
600 | ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); | |
601 | ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); | |
602 | ||
603 | /* disable power smoothing */ | |
604 | ret |= dib7000p_write_word(state, 145, 0); | |
605 | ret |= dib7000p_write_word(state, 146, 0); | |
606 | ret |= dib7000p_write_word(state, 147, 0); | |
607 | ret |= dib7000p_write_word(state, 148, 0); | |
608 | ret |= dib7000p_write_word(state, 149, 0); | |
609 | ret |= dib7000p_write_word(state, 150, 0); | |
610 | ret |= dib7000p_write_word(state, 151, 0); | |
611 | ret |= dib7000p_write_word(state, 152, 0); | |
612 | ||
613 | // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26 | |
614 | ret |= dib7000p_write_word(state, 26 ,0x6680); | |
615 | ||
616 | // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16 | |
617 | ret |= dib7000p_write_word(state, 142,0x0410); | |
618 | // P_fft_freq_dir=1, P_fft_nb_to_cut=0 | |
619 | ret |= dib7000p_write_word(state, 154,1 << 13); | |
620 | // P_pha3_thres, default 0x3000 | |
621 | ret |= dib7000p_write_word(state, 168,0x0ccd); | |
622 | // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010 | |
623 | //ret |= dib7000p_write_word(state, 169,0x0010); | |
624 | // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005 | |
625 | ret |= dib7000p_write_word(state, 183,0x200f); | |
626 | // P_adp_regul_cnt=573, default: 410 | |
627 | ret |= dib7000p_write_word(state, 187,0x023d); | |
628 | // P_adp_noise_cnt= | |
629 | ret |= dib7000p_write_word(state, 188,0x00a4); | |
630 | // P_adp_regul_ext | |
631 | ret |= dib7000p_write_word(state, 189,0x00a4); | |
632 | // P_adp_noise_ext | |
633 | ret |= dib7000p_write_word(state, 190,0x7ff0); | |
634 | // P_adp_fil | |
635 | ret |= dib7000p_write_word(state, 191,0x3ccc); | |
636 | ||
637 | ret |= dib7000p_write_word(state, 222,0x0010); | |
638 | // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard | |
639 | ret |= dib7000p_write_word(state, 235,0x0062); | |
640 | ||
641 | // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ... | |
642 | if(state->cfg.tuner_is_baseband) | |
643 | ret |= dib7000p_write_word(state, 36,0x0755); | |
644 | else | |
645 | ret |= dib7000p_write_word(state, 36,0x1f55); | |
646 | ||
647 | // auto search configuration | |
648 | ret |= dib7000p_write_word(state, 2 ,0x0004); | |
649 | ret |= dib7000p_write_word(state, 3 ,0x1000); | |
650 | ||
651 | /* Equal Lock */ | |
652 | ret |= dib7000p_write_word(state, 4 ,0x0814); | |
653 | ||
654 | ret |= dib7000p_write_word(state, 6 ,0x001b); | |
655 | ret |= dib7000p_write_word(state, 7 ,0x7740); | |
656 | ret |= dib7000p_write_word(state, 8 ,0x005b); | |
657 | ret |= dib7000p_write_word(state, 9 ,0x8d80); | |
658 | ret |= dib7000p_write_word(state, 10 ,0x01c9); | |
659 | ret |= dib7000p_write_word(state, 11 ,0xc380); | |
660 | ret |= dib7000p_write_word(state, 12 ,0x0000); | |
661 | ret |= dib7000p_write_word(state, 13 ,0x0080); | |
662 | ret |= dib7000p_write_word(state, 14 ,0x0000); | |
663 | ret |= dib7000p_write_word(state, 15 ,0x0090); | |
664 | ret |= dib7000p_write_word(state, 16 ,0x0001); | |
665 | ret |= dib7000p_write_word(state, 17 ,0xd4c0); | |
666 | ||
667 | // P_clk_cfg1 | |
668 | ret |= dib7000p_write_word(state, 901, 0x0006); | |
669 | ||
670 | // P_divclksel=3 P_divbitsel=1 | |
671 | ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6)); | |
672 | ||
673 | // Tuner IO bank: max drive (14mA) + divout pads max drive | |
674 | ret |= dib7000p_write_word(state, 905, 0x2c8e); | |
675 | ||
676 | ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ); | |
677 | dib7000p_sad_calib(state); | |
678 | ||
679 | return ret; | |
680 | } | |
681 | ||
682 | static int dib7000p_sleep(struct dvb_frontend *demod) | |
683 | { | |
684 | struct dib7000p_state *state = demod->demodulator_priv; | |
685 | return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY); | |
686 | } | |
687 | ||
688 | static int dib7000p_identify(struct dib7000p_state *st) | |
689 | { | |
690 | u16 value; | |
691 | dprintk("-I- DiB7000PC: checking demod on I2C address: %d (%x)\n", | |
692 | st->i2c_addr, st->i2c_addr); | |
693 | ||
694 | if ((value = dib7000p_read_word(st, 768)) != 0x01b3) { | |
695 | dprintk("-E- DiB7000PC: wrong Vendor ID (read=0x%x)\n",value); | |
696 | return -EREMOTEIO; | |
697 | } | |
698 | ||
699 | if ((value = dib7000p_read_word(st, 769)) != 0x4000) { | |
700 | dprintk("-E- DiB7000PC: wrong Device ID (%x)\n",value); | |
701 | return -EREMOTEIO; | |
702 | } | |
703 | ||
704 | return 0; | |
705 | } | |
706 | ||
707 | ||
708 | static int dib7000p_get_frontend(struct dvb_frontend* fe, | |
709 | struct dvb_frontend_parameters *fep) | |
710 | { | |
711 | struct dib7000p_state *state = fe->demodulator_priv; | |
712 | u16 tps = dib7000p_read_word(state,463); | |
713 | ||
714 | fep->inversion = INVERSION_AUTO; | |
715 | ||
716 | fep->u.ofdm.bandwidth = state->current_bandwidth; | |
717 | ||
718 | switch ((tps >> 8) & 0x3) { | |
719 | case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break; | |
720 | case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break; | |
721 | /* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */ | |
722 | } | |
723 | ||
724 | switch (tps & 0x3) { | |
725 | case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break; | |
726 | case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break; | |
727 | case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break; | |
728 | case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break; | |
729 | } | |
730 | ||
731 | switch ((tps >> 14) & 0x3) { | |
732 | case 0: fep->u.ofdm.constellation = QPSK; break; | |
733 | case 1: fep->u.ofdm.constellation = QAM_16; break; | |
734 | case 2: | |
735 | default: fep->u.ofdm.constellation = QAM_64; break; | |
736 | } | |
737 | ||
738 | /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */ | |
739 | /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */ | |
740 | ||
741 | fep->u.ofdm.hierarchy_information = HIERARCHY_NONE; | |
742 | switch ((tps >> 5) & 0x7) { | |
743 | case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break; | |
744 | case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break; | |
745 | case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break; | |
746 | case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break; | |
747 | case 7: | |
748 | default: fep->u.ofdm.code_rate_HP = FEC_7_8; break; | |
749 | ||
750 | } | |
751 | ||
752 | switch ((tps >> 2) & 0x7) { | |
753 | case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break; | |
754 | case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break; | |
755 | case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break; | |
756 | case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break; | |
757 | case 7: | |
758 | default: fep->u.ofdm.code_rate_LP = FEC_7_8; break; | |
759 | } | |
760 | ||
761 | /* native interleaver: (dib7000p_read_word(state, 464) >> 5) & 0x1 */ | |
762 | ||
763 | return 0; | |
764 | } | |
765 | ||
766 | static int dib7000p_set_frontend(struct dvb_frontend* fe, | |
767 | struct dvb_frontend_parameters *fep) | |
768 | { | |
769 | struct dib7000p_state *state = fe->demodulator_priv; | |
770 | struct dibx000_ofdm_channel ch; | |
771 | ||
772 | INIT_OFDM_CHANNEL(&ch); | |
773 | FEP2DIB(fep,&ch); | |
774 | ||
775 | state->current_bandwidth = fep->u.ofdm.bandwidth; | |
776 | dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth); | |
777 | ||
778 | if (fe->ops.tuner_ops.set_params) | |
779 | fe->ops.tuner_ops.set_params(fe, fep); | |
780 | ||
781 | if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO || | |
782 | fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO || | |
783 | fep->u.ofdm.constellation == QAM_AUTO || | |
784 | fep->u.ofdm.code_rate_HP == FEC_AUTO) { | |
785 | int i = 800, found; | |
786 | ||
787 | dib7000p_autosearch_start(fe, &ch); | |
788 | do { | |
789 | msleep(1); | |
790 | found = dib7000p_autosearch_is_irq(fe); | |
791 | } while (found == 0 && i--); | |
792 | ||
793 | dprintk("autosearch returns: %d\n",found); | |
794 | if (found == 0 || found == 1) | |
795 | return 0; // no channel found | |
796 | ||
797 | dib7000p_get_frontend(fe, fep); | |
798 | FEP2DIB(fep, &ch); | |
799 | } | |
800 | ||
801 | /* make this a config parameter */ | |
802 | dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO); | |
803 | ||
804 | return dib7000p_tune(fe, &ch); | |
805 | } | |
806 | ||
807 | static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat) | |
808 | { | |
809 | struct dib7000p_state *state = fe->demodulator_priv; | |
810 | u16 lock = dib7000p_read_word(state, 509); | |
811 | ||
812 | *stat = 0; | |
813 | ||
814 | if (lock & 0x8000) | |
815 | *stat |= FE_HAS_SIGNAL; | |
816 | if (lock & 0x3000) | |
817 | *stat |= FE_HAS_CARRIER; | |
818 | if (lock & 0x0100) | |
819 | *stat |= FE_HAS_VITERBI; | |
820 | if (lock & 0x0010) | |
821 | *stat |= FE_HAS_SYNC; | |
822 | if (lock & 0x0008) | |
823 | *stat |= FE_HAS_LOCK; | |
824 | ||
825 | return 0; | |
826 | } | |
827 | ||
828 | static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber) | |
829 | { | |
830 | struct dib7000p_state *state = fe->demodulator_priv; | |
831 | *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501); | |
832 | return 0; | |
833 | } | |
834 | ||
835 | static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) | |
836 | { | |
837 | struct dib7000p_state *state = fe->demodulator_priv; | |
838 | *unc = dib7000p_read_word(state, 506); | |
839 | return 0; | |
840 | } | |
841 | ||
842 | static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength) | |
843 | { | |
844 | struct dib7000p_state *state = fe->demodulator_priv; | |
845 | u16 val = dib7000p_read_word(state, 394); | |
846 | *strength = 65535 - val; | |
847 | return 0; | |
848 | } | |
849 | ||
850 | static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr) | |
851 | { | |
852 | *snr = 0x0000; | |
853 | return 0; | |
854 | } | |
855 | ||
856 | static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) | |
857 | { | |
858 | tune->min_delay_ms = 1000; | |
859 | return 0; | |
860 | } | |
861 | ||
862 | static void dib7000p_release(struct dvb_frontend *demod) | |
863 | { | |
864 | struct dib7000p_state *st = demod->demodulator_priv; | |
865 | dibx000_exit_i2c_master(&st->i2c_master); | |
866 | kfree(st); | |
867 | } | |
868 | ||
869 | int dib7000pc_detection(struct i2c_adapter *i2c_adap) | |
870 | { | |
871 | u8 tx[2], rx[2]; | |
872 | struct i2c_msg msg[2] = { | |
873 | { .addr = 18 >> 1, .flags = 0, .buf = tx, .len = 2 }, | |
874 | { .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 }, | |
875 | }; | |
876 | ||
877 | tx[0] = 0x03; | |
878 | tx[1] = 0x00; | |
879 | ||
880 | if (i2c_transfer(i2c_adap, msg, 2) == 2) | |
881 | if (rx[0] == 0x01 && rx[1] == 0xb3) { | |
882 | dprintk("-D- DiB7000PC detected\n"); | |
883 | return 1; | |
884 | } | |
885 | ||
886 | msg[0].addr = msg[1].addr = 0x40; | |
887 | ||
888 | if (i2c_transfer(i2c_adap, msg, 2) == 2) | |
889 | if (rx[0] == 0x01 && rx[1] == 0xb3) { | |
890 | dprintk("-D- DiB7000PC detected\n"); | |
891 | return 1; | |
892 | } | |
893 | ||
894 | dprintk("-D- DiB7000PC not detected\n"); | |
895 | return 0; | |
896 | } | |
897 | EXPORT_SYMBOL(dib7000pc_detection); | |
898 | ||
899 | struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating) | |
900 | { | |
901 | struct dib7000p_state *st = demod->demodulator_priv; | |
902 | return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); | |
903 | } | |
904 | EXPORT_SYMBOL(dib7000p_get_i2c_master); | |
905 | ||
906 | int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]) | |
907 | { | |
908 | struct dib7000p_state st = { .i2c_adap = i2c }; | |
909 | int k = 0; | |
910 | u8 new_addr = 0; | |
911 | ||
912 | for (k = no_of_demods-1; k >= 0; k--) { | |
913 | st.cfg = cfg[k]; | |
914 | ||
915 | /* designated i2c address */ | |
916 | new_addr = (0x40 + k) << 1; | |
917 | st.i2c_addr = new_addr; | |
918 | if (dib7000p_identify(&st) != 0) { | |
919 | st.i2c_addr = default_addr; | |
920 | if (dib7000p_identify(&st) != 0) { | |
921 | dprintk("DiB7000P #%d: not identified\n", k); | |
922 | return -EIO; | |
923 | } | |
924 | } | |
925 | ||
926 | /* start diversity to pull_down div_str - just for i2c-enumeration */ | |
927 | dib7000p_set_output_mode(&st, OUTMODE_DIVERSITY); | |
928 | ||
929 | /* set new i2c address and force divstart */ | |
930 | dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2); | |
931 | ||
932 | dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr); | |
933 | } | |
934 | ||
935 | for (k = 0; k < no_of_demods; k++) { | |
936 | st.cfg = cfg[k]; | |
937 | st.i2c_addr = (0x40 + k) << 1; | |
938 | ||
939 | // unforce divstr | |
940 | dib7000p_write_word(&st, 1285, st.i2c_addr << 2); | |
941 | ||
942 | /* deactivate div - it was just for i2c-enumeration */ | |
943 | dib7000p_set_output_mode(&st, OUTMODE_HIGH_Z); | |
944 | } | |
945 | ||
946 | return 0; | |
947 | } | |
948 | EXPORT_SYMBOL(dib7000p_i2c_enumeration); | |
949 | ||
950 | static struct dvb_frontend_ops dib7000p_ops; | |
951 | struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg) | |
952 | { | |
953 | struct dvb_frontend *demod; | |
954 | struct dib7000p_state *st; | |
955 | st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL); | |
956 | if (st == NULL) | |
957 | return NULL; | |
958 | ||
959 | memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config)); | |
960 | st->i2c_adap = i2c_adap; | |
961 | st->i2c_addr = i2c_addr; | |
962 | st->gpio_val = cfg->gpio_val; | |
963 | st->gpio_dir = cfg->gpio_dir; | |
964 | ||
965 | demod = &st->demod; | |
966 | demod->demodulator_priv = st; | |
967 | memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops)); | |
968 | ||
969 | if (dib7000p_identify(st) != 0) | |
970 | goto error; | |
971 | ||
972 | dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); | |
973 | ||
974 | dib7000p_demod_reset(st); | |
975 | ||
976 | return demod; | |
977 | ||
978 | error: | |
979 | kfree(st); | |
980 | return NULL; | |
981 | } | |
982 | EXPORT_SYMBOL(dib7000p_attach); | |
983 | ||
984 | static struct dvb_frontend_ops dib7000p_ops = { | |
985 | .info = { | |
986 | .name = "DiBcom 7000PC", | |
987 | .type = FE_OFDM, | |
988 | .frequency_min = 44250000, | |
989 | .frequency_max = 867250000, | |
990 | .frequency_stepsize = 62500, | |
991 | .caps = FE_CAN_INVERSION_AUTO | | |
992 | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | |
993 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | |
994 | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | | |
995 | FE_CAN_TRANSMISSION_MODE_AUTO | | |
996 | FE_CAN_GUARD_INTERVAL_AUTO | | |
997 | FE_CAN_RECOVER | | |
998 | FE_CAN_HIERARCHY_AUTO, | |
999 | }, | |
1000 | ||
1001 | .release = dib7000p_release, | |
1002 | ||
1003 | .init = dib7000p_init, | |
1004 | .sleep = dib7000p_sleep, | |
1005 | ||
1006 | .set_frontend = dib7000p_set_frontend, | |
1007 | .get_tune_settings = dib7000p_fe_get_tune_settings, | |
1008 | .get_frontend = dib7000p_get_frontend, | |
1009 | ||
1010 | .read_status = dib7000p_read_status, | |
1011 | .read_ber = dib7000p_read_ber, | |
1012 | .read_signal_strength = dib7000p_read_signal_strength, | |
1013 | .read_snr = dib7000p_read_snr, | |
1014 | .read_ucblocks = dib7000p_read_unc_blocks, | |
1015 | }; | |
1016 | ||
1017 | MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); | |
1018 | MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator"); | |
1019 | MODULE_LICENSE("GPL"); |