projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge tag 'apparmor-pr-2018-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6-block.git] / drivers / macintosh / windfarm_pm121.c
CommitLineData
80ff974d
ÉB		 1/*
2 * Windfarm PowerMac thermal control. iMac G5 iSight
3 *
4 * (c) Copyright 2007 Étienne Bersac <bersace@gmail.com>
5 *
6 * Bits & pieces from windfarm_pm81.c by (c) Copyright 2005 Benjamin
7 * Herrenschmidt, IBM Corp. <benh@kernel.crashing.org>
8 *
9 * Released under the term of the GNU GPL v2.
10 *
11 *
12 *
13 * PowerMac12,1
14 * ============
15 *
16 *
17 * The algorithm used is the PID control algorithm, used the same way
18 * the published Darwin code does, using the same values that are
19 * present in the Darwin 8.10 snapshot property lists (note however
20 * that none of the code has been re-used, it's a complete
21 * re-implementation
22 *
23 * There is two models using PowerMac12,1. Model 2 is iMac G5 iSight
24 * 17" while Model 3 is iMac G5 20". They do have both the same
25 * controls with a tiny difference. The control-ids of hard-drive-fan
26 * and cpu-fan is swapped.
27 *
28 *
29 * Target Correction :
30 *
31 * controls have a target correction calculated as :
32 *
33 * new_min = ((((average_power * slope) >> 16) + offset) >> 16) + min_value
34 * new_value = max(new_value, max(new_min, 0))
35 *
36 * OD Fan control correction.
37 *
38 * # model_id: 2
39 * offset : -19563152
40 * slope : 1956315
41 *
42 * # model_id: 3
43 * offset : -15650652
44 * slope : 1565065
45 *
46 * HD Fan control correction.
47 *
48 * # model_id: 2
49 * offset : -15650652
50 * slope : 1565065
51 *
52 * # model_id: 3
53 * offset : -19563152
54 * slope : 1956315
55 *
56 * CPU Fan control correction.
57 *
58 * # model_id: 2
59 * offset : -25431900
60 * slope : 2543190
61 *
62 * # model_id: 3
63 * offset : -15650652
64 * slope : 1565065
65 *
66 *
67 * Target rubber-banding :
68 *
69 * Some controls have a target correction which depends on another
70 * control value. The correction is computed in the following way :
71 *
72 * new_min = ref_value * slope + offset
73 *
74 * ref_value is the value of the reference control. If new_min is
75 * greater than 0, then we correct the target value using :
76 *
77 * new_target = max (new_target, new_min >> 16)
78 *
79 *
80 * # model_id : 2
81 * control : cpu-fan
82 * ref : optical-drive-fan
83 * offset : -15650652
84 * slope : 1565065
85 *
86 * # model_id : 3
87 * control : optical-drive-fan
88 * ref : hard-drive-fan
89 * offset : -32768000
90 * slope : 65536
91 *
92 *
93 * In order to have the moste efficient correction with those
94 * dependencies, we must trigger HD loop before OD loop before CPU
95 * loop.
96 *
97 *
98 * The various control loops found in Darwin config file are:
99 *
100 * HD Fan control loop.
101 *
102 * # model_id: 2
103 * control : hard-drive-fan
104 * sensor : hard-drive-temp
105 * PID params : G_d = 0x00000000
106 * G_p = 0x002D70A3
107 * G_r = 0x00019999
108 * History = 2 entries
109 * Input target = 0x370000
110 * Interval = 5s
111 *
112 * # model_id: 3
113 * control : hard-drive-fan
114 * sensor : hard-drive-temp
115 * PID params : G_d = 0x00000000
116 * G_p = 0x002170A3
117 * G_r = 0x00019999
118 * History = 2 entries
119 * Input target = 0x370000
120 * Interval = 5s
121 *
122 * OD Fan control loop.
123 *
124 * # model_id: 2
125 * control : optical-drive-fan
126 * sensor : optical-drive-temp
127 * PID params : G_d = 0x00000000
128 * G_p = 0x001FAE14
129 * G_r = 0x00019999
130 * History = 2 entries
131 * Input target = 0x320000
132 * Interval = 5s
133 *
134 * # model_id: 3
135 * control : optical-drive-fan
136 * sensor : optical-drive-temp
137 * PID params : G_d = 0x00000000
138 * G_p = 0x001FAE14
139 * G_r = 0x00019999
140 * History = 2 entries
141 * Input target = 0x320000
142 * Interval = 5s
143 *
144 * GPU Fan control loop.
145 *
146 * # model_id: 2
147 * control : hard-drive-fan
148 * sensor : gpu-temp
149 * PID params : G_d = 0x00000000
150 * G_p = 0x002A6666
151 * G_r = 0x00019999
152 * History = 2 entries
153 * Input target = 0x5A0000
154 * Interval = 5s
155 *
156 * # model_id: 3
157 * control : cpu-fan
158 * sensor : gpu-temp
159 * PID params : G_d = 0x00000000
160 * G_p = 0x0010CCCC
161 * G_r = 0x00019999
162 * History = 2 entries
163 * Input target = 0x500000
164 * Interval = 5s
165 *
166 * KODIAK (aka northbridge) Fan control loop.
167 *
168 * # model_id: 2
169 * control : optical-drive-fan
170 * sensor : north-bridge-temp
171 * PID params : G_d = 0x00000000
172 * G_p = 0x003BD70A
173 * G_r = 0x00019999
174 * History = 2 entries
175 * Input target = 0x550000
176 * Interval = 5s
177 *
178 * # model_id: 3
179 * control : hard-drive-fan
180 * sensor : north-bridge-temp
181 * PID params : G_d = 0x00000000
182 * G_p = 0x0030F5C2
183 * G_r = 0x00019999
184 * History = 2 entries
185 * Input target = 0x550000
186 * Interval = 5s
187 *
188 * CPU Fan control loop.
189 *
190 * control : cpu-fan
191 * sensors : cpu-temp, cpu-power
192 * PID params : from SDB partition
193 *
194 *
195 * CPU Slew control loop.
196 *
197 * control : cpufreq-clamp
198 * sensor : cpu-temp
199 *
200 */
201
202#undef DEBUG
203
204#include <linux/types.h>
205#include <linux/errno.h>
206#include <linux/kernel.h>
207#include <linux/delay.h>
208#include <linux/slab.h>
209#include <linux/init.h>
210#include <linux/spinlock.h>
211#include <linux/wait.h>
212#include <linux/kmod.h>
213#include <linux/device.h>
214#include <linux/platform_device.h>
215#include <asm/prom.h>
216#include <asm/machdep.h>
217#include <asm/io.h>
80ff974d
ÉB		 218#include <asm/sections.h>
219#include <asm/smu.h>
220
221#include "windfarm.h"
222#include "windfarm_pid.h"
223
224#define VERSION "0.3"
225
226static int pm121_mach_model; /* machine model id */
227
228/* Controls & sensors */
229static struct wf_sensor *sensor_cpu_power;
230static struct wf_sensor *sensor_cpu_temp;
231static struct wf_sensor *sensor_cpu_voltage;
232static struct wf_sensor *sensor_cpu_current;
233static struct wf_sensor *sensor_gpu_temp;
234static struct wf_sensor *sensor_north_bridge_temp;
235static struct wf_sensor *sensor_hard_drive_temp;
236static struct wf_sensor *sensor_optical_drive_temp;
237static struct wf_sensor *sensor_incoming_air_temp; /* unused ! */
238
239enum {
240 FAN_CPU,
241 FAN_HD,
242 FAN_OD,
243 CPUFREQ,
244 N_CONTROLS
245};
246static struct wf_control *controls[N_CONTROLS] = {};
247
248/* Set to kick the control loop into life */
4f256d56
GS		 249static int pm121_all_controls_ok, pm121_all_sensors_ok;
250static bool pm121_started;
80ff974d
ÉB		 251
252enum {
253 FAILURE_FAN = 1 << 0,
254 FAILURE_SENSOR = 1 << 1,
255 FAILURE_OVERTEMP = 1 << 2
256};
257
258/* All sys loops. Note the HD before the OD loop in order to have it
259 run before. */
260enum {
261 LOOP_GPU, /* control = hd or cpu, but luckily,
262 it doesn't matter */
263 LOOP_HD, /* control = hd */
264 LOOP_KODIAK, /* control = hd or od */
265 LOOP_OD, /* control = od */
266 N_LOOPS
267};
268
269static const char *loop_names[N_LOOPS] = {
270 "GPU",
271 "HD",
272 "KODIAK",
273 "OD",
274};
275
276#define PM121_NUM_CONFIGS 2
277
278static unsigned int pm121_failure_state;
279static int pm121_readjust, pm121_skipping;
4bb29711 280static bool pm121_overtemp;
80ff974d
ÉB		 281static s32 average_power;
282
283struct pm121_correction {
284 int offset;
285 int slope;
286};
287
288static struct pm121_correction corrections[N_CONTROLS][PM121_NUM_CONFIGS] = {
289 /* FAN_OD */
290 {
291 /* MODEL 2 */
292 { .offset = -19563152,
293 .slope = 1956315
294 },
295 /* MODEL 3 */
296 { .offset = -15650652,
297 .slope = 1565065
298 },
299 },
300 /* FAN_HD */
301 {
302 /* MODEL 2 */
303 { .offset = -15650652,
304 .slope = 1565065
305 },
306 /* MODEL 3 */
307 { .offset = -19563152,
308 .slope = 1956315
309 },
310 },
311 /* FAN_CPU */
312 {
313 /* MODEL 2 */
314 { .offset = -25431900,
315 .slope = 2543190
316 },
317 /* MODEL 3 */
318 { .offset = -15650652,
319 .slope = 1565065
320 },
321 },
322 /* CPUFREQ has no correction (and is not implemented at all) */
323};
324
325struct pm121_connection {
326 unsigned int control_id;
327 unsigned int ref_id;
328 struct pm121_correction correction;
329};
330
331static struct pm121_connection pm121_connections[] = {
332 /* MODEL 2 */
333 { .control_id = FAN_CPU,
334 .ref_id = FAN_OD,
335 { .offset = -32768000,
336 .slope = 65536
337 }
338 },
339 /* MODEL 3 */
340 { .control_id = FAN_OD,
341 .ref_id = FAN_HD,
342 { .offset = -32768000,
343 .slope = 65536
344 }
345 },
346};
347
348/* pointer to the current model connection */
349static struct pm121_connection *pm121_connection;
350
351/*
352 * ****** System Fans Control Loop ******
353 *
354 */
355
356/* Since each loop handles only one control and we want to avoid
357 * writing virtual control, we store the control correction with the
358 * loop params. Some data are not set, there are common to all loop
359 * and thus, hardcoded.
360 */
361struct pm121_sys_param {
362 /* purely informative since we use mach_model-2 as index */
363 int model_id;
364 struct wf_sensor **sensor; /* use sensor_id instead ? */
365 s32 gp, itarget;
366 unsigned int control_id;
367};
368
369static struct pm121_sys_param
370pm121_sys_all_params[N_LOOPS][PM121_NUM_CONFIGS] = {
371 /* GPU Fan control loop */
372 {
373 { .model_id = 2,
374 .sensor = &sensor_gpu_temp,
375 .gp = 0x002A6666,
376 .itarget = 0x5A0000,
377 .control_id = FAN_HD,
378 },
379 { .model_id = 3,
380 .sensor = &sensor_gpu_temp,
381 .gp = 0x0010CCCC,
382 .itarget = 0x500000,
383 .control_id = FAN_CPU,
384 },
385 },
386 /* HD Fan control loop */
387 {
388 { .model_id = 2,
389 .sensor = &sensor_hard_drive_temp,
390 .gp = 0x002D70A3,
391 .itarget = 0x370000,
392 .control_id = FAN_HD,
393 },
394 { .model_id = 3,
395 .sensor = &sensor_hard_drive_temp,
396 .gp = 0x002170A3,
397 .itarget = 0x370000,
398 .control_id = FAN_HD,
399 },
400 },
401 /* KODIAK Fan control loop */
402 {
403 { .model_id = 2,
404 .sensor = &sensor_north_bridge_temp,
405 .gp = 0x003BD70A,
406 .itarget = 0x550000,
407 .control_id = FAN_OD,
408 },
409 { .model_id = 3,
410 .sensor = &sensor_north_bridge_temp,
411 .gp = 0x0030F5C2,
412 .itarget = 0x550000,
413 .control_id = FAN_HD,
414 },
415 },
416 /* OD Fan control loop */
417 {
418 { .model_id = 2,
419 .sensor = &sensor_optical_drive_temp,
420 .gp = 0x001FAE14,
421 .itarget = 0x320000,
422 .control_id = FAN_OD,
423 },
424 { .model_id = 3,
425 .sensor = &sensor_optical_drive_temp,
426 .gp = 0x001FAE14,
427 .itarget = 0x320000,
428 .control_id = FAN_OD,
429 },
430 },
431};
432
433/* the hardcoded values */
434#define PM121_SYS_GD 0x00000000
435#define PM121_SYS_GR 0x00019999
436#define PM121_SYS_HISTORY_SIZE 2
437#define PM121_SYS_INTERVAL 5
438
439/* State data used by the system fans control loop
440 */
441struct pm121_sys_state {
442 int ticks;
443 s32 setpoint;
444 struct wf_pid_state pid;
445};
446
447struct pm121_sys_state *pm121_sys_state[N_LOOPS] = {};
448
449/*
450 * ****** CPU Fans Control Loop ******
451 *
452 */
453
454#define PM121_CPU_INTERVAL 1
455
456/* State data used by the cpu fans control loop
457 */
458struct pm121_cpu_state {
459 int ticks;
460 s32 setpoint;
461 struct wf_cpu_pid_state pid;
462};
463
464static struct pm121_cpu_state *pm121_cpu_state;
465
466
467
468/*
469 * ***** Implementation *****
470 *
471 */
472
473/* correction the value using the output-low-bound correction algo */
474static s32 pm121_correct(s32 new_setpoint,
475 unsigned int control_id,
476 s32 min)
477{
478 s32 new_min;
479 struct pm121_correction *correction;
480 correction = &corrections[control_id][pm121_mach_model - 2];
481
482 new_min = (average_power * correction->slope) >> 16;
483 new_min += correction->offset;
484 new_min = (new_min >> 16) + min;
485
732eacc0 486 return max3(new_setpoint, new_min, 0);
80ff974d
ÉB		 487}
488
489static s32 pm121_connect(unsigned int control_id, s32 setpoint)
490{
491 s32 new_min, value, new_setpoint;
492
493 if (pm121_connection->control_id == control_id) {
494 controls[control_id]->ops->get_value(controls[control_id],
495 &value);
496 new_min = value * pm121_connection->correction.slope;
497 new_min += pm121_connection->correction.offset;
498 if (new_min > 0) {
499 new_setpoint = max(setpoint, (new_min >> 16));
500 if (new_setpoint != setpoint) {
501 pr_debug("pm121: %s depending on %s, "
502 "corrected from %d to %d RPM\n",
503 controls[control_id]->name,
504 controls[pm121_connection->ref_id]->name,
505 (int) setpoint, (int) new_setpoint);
506 }
507 } else
508 new_setpoint = setpoint;
509 }
510 /* no connection */
511 else
512 new_setpoint = setpoint;
513
514 return new_setpoint;
515}
516
517/* FAN LOOPS */
518static void pm121_create_sys_fans(int loop_id)
519{
520 struct pm121_sys_param *param = NULL;
521 struct wf_pid_param pid_param;
522 struct wf_control *control = NULL;
523 int i;
524
525 /* First, locate the params for this model */
526 for (i = 0; i < PM121_NUM_CONFIGS; i++) {
527 if (pm121_sys_all_params[loop_id][i].model_id == pm121_mach_model) {
528 param = &(pm121_sys_all_params[loop_id][i]);
529 break;
530 }
531 }
532
533 /* No params found, put fans to max */
534 if (param == NULL) {
535 printk(KERN_WARNING "pm121: %s fan config not found "
536 " for this machine model\n",
537 loop_names[loop_id]);
538 goto fail;
539 }
540
541 control = controls[param->control_id];
542
543 /* Alloc & initialize state */
544 pm121_sys_state[loop_id] = kmalloc(sizeof(struct pm121_sys_state),
545 GFP_KERNEL);
546 if (pm121_sys_state[loop_id] == NULL) {
547 printk(KERN_WARNING "pm121: Memory allocation error\n");
548 goto fail;
549 }
550 pm121_sys_state[loop_id]->ticks = 1;
551
552 /* Fill PID params */
553 pid_param.gd = PM121_SYS_GD;
554 pid_param.gp = param->gp;
555 pid_param.gr = PM121_SYS_GR;
556 pid_param.interval = PM121_SYS_INTERVAL;
557 pid_param.history_len = PM121_SYS_HISTORY_SIZE;
558 pid_param.itarget = param->itarget;
bd0c30e3
RS		 559 if(control)
560 {
561 pid_param.min = control->ops->get_min(control);
562 pid_param.max = control->ops->get_max(control);
563 } else {
564 /*
565 * This is probably not the right!?
566 * Perhaps goto fail if control == NULL above?
567 */
568 pid_param.min = 0;
569 pid_param.max = 0;
570 }
80ff974d
ÉB		 571
572 wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param);
573
574 pr_debug("pm121: %s Fan control loop initialized.\n"
575 " itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
576 loop_names[loop_id], FIX32TOPRINT(pid_param.itarget),
577 pid_param.min, pid_param.max);
578 return;
579
580 fail:
581 /* note that this is not optimal since another loop may still
582 control the same control */
583 printk(KERN_WARNING "pm121: failed to set up %s loop "
584 "setting \"%s\" to max speed.\n",
bd0c30e3 585 loop_names[loop_id], control ? control->name : "uninitialized value");
80ff974d
ÉB		 586
587 if (control)
588 wf_control_set_max(control);
589}
590
591static void pm121_sys_fans_tick(int loop_id)
592{
593 struct pm121_sys_param *param;
594 struct pm121_sys_state *st;
595 struct wf_sensor *sensor;
596 struct wf_control *control;
597 s32 temp, new_setpoint;
598 int rc;
599
600 param = &(pm121_sys_all_params[loop_id][pm121_mach_model-2]);
601 st = pm121_sys_state[loop_id];
602 sensor = *(param->sensor);
603 control = controls[param->control_id];
604
605 if (--st->ticks != 0) {
606 if (pm121_readjust)
607 goto readjust;
608 return;
609 }
610 st->ticks = PM121_SYS_INTERVAL;
611
612 rc = sensor->ops->get_value(sensor, &temp);
613 if (rc) {
614 printk(KERN_WARNING "windfarm: %s sensor error %d\n",
615 sensor->name, rc);
616 pm121_failure_state |= FAILURE_SENSOR;
617 return;
618 }
619
620 pr_debug("pm121: %s Fan tick ! %s: %d.%03d\n",
621 loop_names[loop_id], sensor->name,
622 FIX32TOPRINT(temp));
623
624 new_setpoint = wf_pid_run(&st->pid, temp);
625
626 /* correction */
627 new_setpoint = pm121_correct(new_setpoint,
628 param->control_id,
629 st->pid.param.min);
630 /* linked corretion */
631 new_setpoint = pm121_connect(param->control_id, new_setpoint);
632
633 if (new_setpoint == st->setpoint)
634 return;
635 st->setpoint = new_setpoint;
636 pr_debug("pm121: %s corrected setpoint: %d RPM\n",
637 control->name, (int)new_setpoint);
638 readjust:
639 if (control && pm121_failure_state == 0) {
640 rc = control->ops->set_value(control, st->setpoint);
641 if (rc) {
642 printk(KERN_WARNING "windfarm: %s fan error %d\n",
643 control->name, rc);
644 pm121_failure_state |= FAILURE_FAN;
645 }
646 }
647}
648
649
650/* CPU LOOP */
651static void pm121_create_cpu_fans(void)
652{
653 struct wf_cpu_pid_param pid_param;
654 const struct smu_sdbp_header *hdr;
655 struct smu_sdbp_cpupiddata *piddata;
656 struct smu_sdbp_fvt *fvt;
657 struct wf_control *fan_cpu;
658 s32 tmax, tdelta, maxpow, powadj;
659
660 fan_cpu = controls[FAN_CPU];
661
662 /* First, locate the PID params in SMU SBD */
663 hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
664 if (hdr == 0) {
665 printk(KERN_WARNING "pm121: CPU PID fan config not found.\n");
666 goto fail;
667 }
668 piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
669
670 /* Get the FVT params for operating point 0 (the only supported one
671 * for now) in order to get tmax
672 */
673 hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
674 if (hdr) {
675 fvt = (struct smu_sdbp_fvt *)&hdr[1];
676 tmax = ((s32)fvt->maxtemp) << 16;
677 } else
678 tmax = 0x5e0000; /* 94 degree default */
679
680 /* Alloc & initialize state */
681 pm121_cpu_state = kmalloc(sizeof(struct pm121_cpu_state),
682 GFP_KERNEL);
683 if (pm121_cpu_state == NULL)
684 goto fail;
685 pm121_cpu_state->ticks = 1;
686
687 /* Fill PID params */
688 pid_param.interval = PM121_CPU_INTERVAL;
689 pid_param.history_len = piddata->history_len;
690 if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
691 printk(KERN_WARNING "pm121: History size overflow on "
692 "CPU control loop (%d)\n", piddata->history_len);
693 pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
694 }
695 pid_param.gd = piddata->gd;
696 pid_param.gp = piddata->gp;
697 pid_param.gr = piddata->gr / pid_param.history_len;
698
699 tdelta = ((s32)piddata->target_temp_delta) << 16;
700 maxpow = ((s32)piddata->max_power) << 16;
701 powadj = ((s32)piddata->power_adj) << 16;
702
703 pid_param.tmax = tmax;
704 pid_param.ttarget = tmax - tdelta;
705 pid_param.pmaxadj = maxpow - powadj;
706
707 pid_param.min = fan_cpu->ops->get_min(fan_cpu);
708 pid_param.max = fan_cpu->ops->get_max(fan_cpu);
709
710 wf_cpu_pid_init(&pm121_cpu_state->pid, &pid_param);
711
712 pr_debug("pm121: CPU Fan control initialized.\n");
713 pr_debug(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM,\n",
714 FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
715 pid_param.min, pid_param.max);
716
717 return;
718
719 fail:
720 printk(KERN_WARNING "pm121: CPU fan config not found, max fan speed\n");
721
722 if (controls[CPUFREQ])
723 wf_control_set_max(controls[CPUFREQ]);
724 if (fan_cpu)
725 wf_control_set_max(fan_cpu);
726}
727
728
729static void pm121_cpu_fans_tick(struct pm121_cpu_state *st)
730{
731 s32 new_setpoint, temp, power;
732 struct wf_control *fan_cpu = NULL;
733 int rc;
734
735 if (--st->ticks != 0) {
736 if (pm121_readjust)
737 goto readjust;
738 return;
739 }
740 st->ticks = PM121_CPU_INTERVAL;
741
742 fan_cpu = controls[FAN_CPU];
743
744 rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
745 if (rc) {
746 printk(KERN_WARNING "pm121: CPU temp sensor error %d\n",
747 rc);
748 pm121_failure_state |= FAILURE_SENSOR;
749 return;
750 }
751
752 rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
753 if (rc) {
754 printk(KERN_WARNING "pm121: CPU power sensor error %d\n",
755 rc);
756 pm121_failure_state |= FAILURE_SENSOR;
757 return;
758 }
759
760 pr_debug("pm121: CPU Fans tick ! CPU temp: %d.%03d°C, power: %d.%03d\n",
761 FIX32TOPRINT(temp), FIX32TOPRINT(power));
762
763 if (temp > st->pid.param.tmax)
764 pm121_failure_state |= FAILURE_OVERTEMP;
765
766 new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
767
768 /* correction */
769 new_setpoint = pm121_correct(new_setpoint,
770 FAN_CPU,
771 st->pid.param.min);
772
773 /* connected correction */
774 new_setpoint = pm121_connect(FAN_CPU, new_setpoint);
775
776 if (st->setpoint == new_setpoint)
777 return;
778 st->setpoint = new_setpoint;
779 pr_debug("pm121: CPU corrected setpoint: %d RPM\n", (int)new_setpoint);
780
781 readjust:
782 if (fan_cpu && pm121_failure_state == 0) {
783 rc = fan_cpu->ops->set_value(fan_cpu, st->setpoint);
784 if (rc) {
785 printk(KERN_WARNING "pm121: %s fan error %d\n",
786 fan_cpu->name, rc);
787 pm121_failure_state |= FAILURE_FAN;
788 }
789 }
790}
791
792/*
793 * ****** Common ******
794 *
795 */
796
797static void pm121_tick(void)
798{
799 unsigned int last_failure = pm121_failure_state;
800 unsigned int new_failure;
801 s32 total_power;
802 int i;
803
804 if (!pm121_started) {
805 pr_debug("pm121: creating control loops !\n");
806 for (i = 0; i < N_LOOPS; i++)
807 pm121_create_sys_fans(i);
808
809 pm121_create_cpu_fans();
4f256d56 810 pm121_started = true;
80ff974d
ÉB		 811 }
812
813 /* skipping ticks */
814 if (pm121_skipping && --pm121_skipping)
815 return;
816
817 /* compute average power */
818 total_power = 0;
819 for (i = 0; i < pm121_cpu_state->pid.param.history_len; i++)
820 total_power += pm121_cpu_state->pid.powers[i];
821
822 average_power = total_power / pm121_cpu_state->pid.param.history_len;
823
824
825 pm121_failure_state = 0;
826 for (i = 0 ; i < N_LOOPS; i++) {
827 if (pm121_sys_state[i])
828 pm121_sys_fans_tick(i);
829 }
830
831 if (pm121_cpu_state)
832 pm121_cpu_fans_tick(pm121_cpu_state);
833
834 pm121_readjust = 0;
835 new_failure = pm121_failure_state & ~last_failure;
836
837 /* If entering failure mode, clamp cpufreq and ramp all
838 * fans to full speed.
839 */
840 if (pm121_failure_state && !last_failure) {
841 for (i = 0; i < N_CONTROLS; i++) {
842 if (controls[i])
843 wf_control_set_max(controls[i]);
844 }
845 }
846
847 /* If leaving failure mode, unclamp cpufreq and readjust
848 * all fans on next iteration
849 */
850 if (!pm121_failure_state && last_failure) {
851 if (controls[CPUFREQ])
852 wf_control_set_min(controls[CPUFREQ]);
853 pm121_readjust = 1;
854 }
855
856 /* Overtemp condition detected, notify and start skipping a couple
857 * ticks to let the temperature go down
858 */
859 if (new_failure & FAILURE_OVERTEMP) {
860 wf_set_overtemp();
861 pm121_skipping = 2;
4bb29711 862 pm121_overtemp = true;
80ff974d
ÉB		 863 }
864
865 /* We only clear the overtemp condition if overtemp is cleared
866 * _and_ no other failure is present. Since a sensor error will
867 * clear the overtemp condition (can't measure temperature) at
868 * the control loop levels, but we don't want to keep it clear
869 * here in this case
870 */
4bb29711 871 if (!pm121_failure_state && pm121_overtemp) {
80ff974d 872 wf_clear_overtemp();
4bb29711
AK		 873 pm121_overtemp = false;
874 }
80ff974d
ÉB		 875}
876
877
878static struct wf_control* pm121_register_control(struct wf_control *ct,
879 const char *match,
880 unsigned int id)
881{
882 if (controls[id] == NULL && !strcmp(ct->name, match)) {
883 if (wf_get_control(ct) == 0)
884 controls[id] = ct;
885 }
886 return controls[id];
887}
888
889static void pm121_new_control(struct wf_control *ct)
890{
891 int all = 1;
892
893 if (pm121_all_controls_ok)
894 return;
895
896 all = pm121_register_control(ct, "optical-drive-fan", FAN_OD) && all;
897 all = pm121_register_control(ct, "hard-drive-fan", FAN_HD) && all;
898 all = pm121_register_control(ct, "cpu-fan", FAN_CPU) && all;
899 all = pm121_register_control(ct, "cpufreq-clamp", CPUFREQ) && all;
900
901 if (all)
902 pm121_all_controls_ok = 1;
903}
904
905
906
907
908static struct wf_sensor* pm121_register_sensor(struct wf_sensor *sensor,
909 const char *match,
910 struct wf_sensor **var)
911{
912 if (*var == NULL && !strcmp(sensor->name, match)) {
913 if (wf_get_sensor(sensor) == 0)
914 *var = sensor;
915 }
916 return *var;
917}
918
919static void pm121_new_sensor(struct wf_sensor *sr)
920{
921 int all = 1;
922
923 if (pm121_all_sensors_ok)
924 return;
925
926 all = pm121_register_sensor(sr, "cpu-temp",
927 &sensor_cpu_temp) && all;
928 all = pm121_register_sensor(sr, "cpu-current",
929 &sensor_cpu_current) && all;
930 all = pm121_register_sensor(sr, "cpu-voltage",
931 &sensor_cpu_voltage) && all;
932 all = pm121_register_sensor(sr, "cpu-power",
933 &sensor_cpu_power) && all;
934 all = pm121_register_sensor(sr, "hard-drive-temp",
935 &sensor_hard_drive_temp) && all;
936 all = pm121_register_sensor(sr, "optical-drive-temp",
937 &sensor_optical_drive_temp) && all;
938 all = pm121_register_sensor(sr, "incoming-air-temp",
939 &sensor_incoming_air_temp) && all;
940 all = pm121_register_sensor(sr, "north-bridge-temp",
941 &sensor_north_bridge_temp) && all;
942 all = pm121_register_sensor(sr, "gpu-temp",
943 &sensor_gpu_temp) && all;
944
945 if (all)
946 pm121_all_sensors_ok = 1;
947}
948
949
950
951static int pm121_notify(struct notifier_block *self,
952 unsigned long event, void *data)
953{
954 switch (event) {
955 case WF_EVENT_NEW_CONTROL:
956 pr_debug("pm121: new control %s detected\n",
957 ((struct wf_control *)data)->name);
958 pm121_new_control(data);
959 break;
960 case WF_EVENT_NEW_SENSOR:
961 pr_debug("pm121: new sensor %s detected\n",
962 ((struct wf_sensor *)data)->name);
963 pm121_new_sensor(data);
964 break;
965 case WF_EVENT_TICK:
966 if (pm121_all_controls_ok && pm121_all_sensors_ok)
967 pm121_tick();
968 break;
969 }
970
971 return 0;
972}
973
974static struct notifier_block pm121_events = {
975 .notifier_call = pm121_notify,
976};
977
978static int pm121_init_pm(void)
979{
980 const struct smu_sdbp_header *hdr;
981
982 hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
983 if (hdr != 0) {
984 struct smu_sdbp_sensortree *st =
985 (struct smu_sdbp_sensortree *)&hdr[1];
986 pm121_mach_model = st->model_id;
987 }
988
989 pm121_connection = &pm121_connections[pm121_mach_model - 2];
990
991 printk(KERN_INFO "pm121: Initializing for iMac G5 iSight model ID %d\n",
992 pm121_mach_model);
993
994 return 0;
995}
996
997
998static int pm121_probe(struct platform_device *ddev)
999{
1000 wf_register_client(&pm121_events);
1001
1002 return 0;
1003}
1004
1da42fb6 1005static int pm121_remove(struct platform_device *ddev)
80ff974d
ÉB		 1006{
1007 wf_unregister_client(&pm121_events);
1008 return 0;
1009}
1010
1011static struct platform_driver pm121_driver = {
1012 .probe = pm121_probe,
1da42fb6 1013 .remove = pm121_remove,
80ff974d
ÉB		 1014 .driver = {
1015 .name = "windfarm",
1016 .bus = &platform_bus_type,
1017 },
1018};
1019
1020
1021static int __init pm121_init(void)
1022{
1023 int rc = -ENODEV;
1024
71a157e8 1025 if (of_machine_is_compatible("PowerMac12,1"))
80ff974d
ÉB		 1026 rc = pm121_init_pm();
1027
1028 if (rc == 0) {
1029 request_module("windfarm_smu_controls");
1030 request_module("windfarm_smu_sensors");
1031 request_module("windfarm_smu_sat");
1032 request_module("windfarm_lm75_sensor");
1033 request_module("windfarm_max6690_sensor");
1034 request_module("windfarm_cpufreq_clamp");
1035 platform_driver_register(&pm121_driver);
1036 }
1037
1038 return rc;
1039}
1040
1041static void __exit pm121_exit(void)
1042{
1043
1044 platform_driver_unregister(&pm121_driver);
1045}
1046
1047
1048module_init(pm121_init);
1049module_exit(pm121_exit);
1050
1051MODULE_AUTHOR("Étienne Bersac <bersace@gmail.com>");
1052MODULE_DESCRIPTION("Thermal control logic for iMac G5 (iSight)");
1053MODULE_LICENSE("GPL");
1054
Linux 6.x block layer and io_uring tree(s)