Commit | Line | Data |
---|---|---|
be5ce2f1 UKK |
1 | config LEDS_GPIO_REGISTER |
2 | bool | |
3 | help | |
4 | This option provides the function gpio_led_register_device. | |
5 | As this function is used by arch code it must not be compiled as a | |
6 | module. | |
7 | ||
66242f7e | 8 | menuconfig NEW_LEDS |
c72a1d60 RP |
9 | bool "LED Support" |
10 | help | |
a8d2e7d9 RP |
11 | Say Y to enable Linux LED support. This allows control of supported |
12 | LEDs from both userspace and optionally, by kernel events (triggers). | |
13 | ||
14 | This is not related to standard keyboard LEDs which are controlled | |
15 | via the input system. | |
c72a1d60 | 16 | |
45d16f09 EM |
17 | if NEW_LEDS |
18 | ||
c72a1d60 | 19 | config LEDS_CLASS |
a403d930 | 20 | tristate "LED Class Support" |
c72a1d60 RP |
21 | help |
22 | This option enables the led sysfs class in /sys/class/leds. You'll | |
23 | need this to do anything useful with LEDs. If unsure, say N. | |
24 | ||
7aea8389 JA |
25 | config LEDS_CLASS_FLASH |
26 | tristate "LED Flash Class Support" | |
27 | depends on LEDS_CLASS | |
28 | help | |
29 | This option enables the flash led sysfs class in /sys/class/leds. | |
30 | It wrapps LED Class and adds flash LEDs specific sysfs attributes | |
31 | and kernel internal API to it. You'll need this to provide support | |
32 | for the flash related features of a LED device. It can be built | |
33 | as a module. | |
34 | ||
24f51e81 | 35 | comment "LED drivers" |
c3bc9956 | 36 | |
0a2f915b HZ |
37 | config LEDS_88PM860X |
38 | tristate "LED Support for Marvell 88PM860x PMIC" | |
0bae35e1 | 39 | depends on LEDS_CLASS |
37814fdc | 40 | depends on MFD_88PM860X |
0a2f915b HZ |
41 | help |
42 | This option enables support for on-chip LED drivers found on Marvell | |
43 | Semiconductor 88PM8606 PMIC. | |
44 | ||
b1e6b706 SKS |
45 | config LEDS_LM3530 |
46 | tristate "LCD Backlight driver for LM3530" | |
47 | depends on LEDS_CLASS | |
48 | depends on I2C | |
49 | help | |
50 | This option enables support for the LCD backlight using | |
51 | LM3530 ambient light sensor chip. This ALS chip can be | |
52 | controlled manually or using PWM input or using ambient | |
53 | light automatically. | |
54 | ||
401dea7f JH |
55 | config LEDS_LM3533 |
56 | tristate "LED support for LM3533" | |
57 | depends on LEDS_CLASS | |
58 | depends on MFD_LM3533 | |
59 | help | |
60 | This option enables support for the LEDs on National Semiconductor / | |
61 | TI LM3533 Lighting Power chips. | |
62 | ||
63 | The LEDs can be controlled directly, through PWM input, or by the | |
64 | ambient-light-sensor interface. The chip supports | |
65 | hardware-accelerated blinking with maximum on and off periods of 9.8 | |
66 | and 77 seconds respectively. | |
67 | ||
8b7cfbec SJ |
68 | config LEDS_LM3642 |
69 | tristate "LED support for LM3642 Chip" | |
70 | depends on LEDS_CLASS && I2C | |
71 | select REGMAP_I2C | |
72 | help | |
73 | This option enables support for LEDs connected to LM3642. | |
74 | The LM3642 is a 4MHz fixed-frequency synchronous boost | |
75 | converter plus 1.5A constant current driver for a high-current | |
76 | white LED. | |
77 | ||
78 | ||
4d3cb354 RP |
79 | config LEDS_LOCOMO |
80 | tristate "LED Support for Locomo device" | |
0bae35e1 | 81 | depends on LEDS_CLASS |
d09e1666 | 82 | depends on SHARP_LOCOMO |
4d3cb354 RP |
83 | help |
84 | This option enables support for the LEDs on Sharp Locomo. | |
85 | Zaurus models SL-5500 and SL-5600. | |
86 | ||
ac67e23b PS |
87 | config LEDS_MIKROTIK_RB532 |
88 | tristate "LED Support for Mikrotik Routerboard 532" | |
0bae35e1 | 89 | depends on LEDS_CLASS |
d09e1666 | 90 | depends on MIKROTIK_RB532 |
ac67e23b PS |
91 | help |
92 | This option enables support for the so called "User LED" of | |
93 | Mikrotik's Routerboard 532. | |
94 | ||
54bdc470 BD |
95 | config LEDS_S3C24XX |
96 | tristate "LED Support for Samsung S3C24XX GPIO LEDs" | |
0bae35e1 | 97 | depends on LEDS_CLASS |
b130d5c2 | 98 | depends on ARCH_S3C24XX |
54bdc470 BD |
99 | help |
100 | This option enables support for LEDs connected to GPIO lines | |
101 | on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. | |
102 | ||
1a87d942 CB |
103 | config LEDS_NET48XX |
104 | tristate "LED Support for Soekris net48xx series Error LED" | |
0bae35e1 | 105 | depends on LEDS_CLASS |
d09e1666 | 106 | depends on SCx200_GPIO |
1a87d942 CB |
107 | help |
108 | This option enables support for the Soekris net4801 and net4826 error | |
109 | LED. | |
110 | ||
3b2e46f8 RW |
111 | config LEDS_FSG |
112 | tristate "LED Support for the Freecom FSG-3" | |
0bae35e1 | 113 | depends on LEDS_CLASS |
d09e1666 | 114 | depends on MACH_FSG |
3b2e46f8 RW |
115 | help |
116 | This option enables support for the LEDs on the Freecom FSG-3. | |
117 | ||
0d75565f KK |
118 | config LEDS_WRAP |
119 | tristate "LED Support for the WRAP series LEDs" | |
0bae35e1 | 120 | depends on LEDS_CLASS |
d09e1666 | 121 | depends on SCx200_GPIO |
0d75565f KK |
122 | help |
123 | This option enables support for the PCEngines WRAP programmable LEDs. | |
124 | ||
f3b6b6cd YY |
125 | config LEDS_COBALT_QUBE |
126 | tristate "LED Support for the Cobalt Qube series front LED" | |
0bae35e1 | 127 | depends on LEDS_CLASS |
d09e1666 | 128 | depends on MIPS_COBALT |
2fea6f35 | 129 | help |
f3b6b6cd | 130 | This option enables support for the front LED on Cobalt Qube series |
2fea6f35 | 131 | |
97da7aaf YY |
132 | config LEDS_COBALT_RAQ |
133 | bool "LED Support for the Cobalt Raq series" | |
ec149619 | 134 | depends on LEDS_CLASS=y && MIPS_COBALT |
97da7aaf YY |
135 | select LEDS_TRIGGERS |
136 | help | |
137 | This option enables support for the Cobalt Raq series LEDs. | |
138 | ||
5843492c DM |
139 | config LEDS_SUNFIRE |
140 | tristate "LED support for SunFire servers." | |
0bae35e1 | 141 | depends on LEDS_CLASS |
d09e1666 | 142 | depends on SPARC64 |
5843492c DM |
143 | select LEDS_TRIGGERS |
144 | help | |
145 | This option enables support for the Left, Middle, and Right | |
146 | LEDs on the I/O and CPU boards of SunFire UltraSPARC servers. | |
147 | ||
4da498fc LW |
148 | config LEDS_IPAQ_MICRO |
149 | tristate "LED Support for the Compaq iPAQ h3xxx" | |
150 | depends on MFD_IPAQ_MICRO | |
151 | help | |
152 | Choose this option if you want to use the notification LED on | |
153 | Compaq/HP iPAQ h3100 and h3600. | |
154 | ||
d39a7a63 KE |
155 | config LEDS_HP6XX |
156 | tristate "LED Support for the HP Jornada 6xx" | |
0bae35e1 | 157 | depends on LEDS_CLASS |
d09e1666 | 158 | depends on SH_HP6XX |
d39a7a63 | 159 | help |
692105b8 | 160 | This option enables LED support for the handheld |
d39a7a63 KE |
161 | HP Jornada 620/660/680/690. |
162 | ||
e14fa824 RV |
163 | config LEDS_PCA9532 |
164 | tristate "LED driver for PCA9532 dimmer" | |
0bae35e1 | 165 | depends on LEDS_CLASS |
5e0b080d | 166 | depends on I2C && INPUT |
e14fa824 RV |
167 | help |
168 | This option enables support for NXP pca9532 | |
692105b8 | 169 | LED controller. It is generally only useful |
e14fa824 RV |
170 | as a platform driver |
171 | ||
3c1ab50d JE |
172 | config LEDS_PCA9532_GPIO |
173 | bool "Enable GPIO support for PCA9532" | |
174 | depends on LEDS_PCA9532 | |
175 | depends on GPIOLIB | |
176 | help | |
177 | Allow unused pins on PCA9532 to be used as gpio. | |
178 | ||
179 | To use a pin as gpio pca9532_type in pca9532_platform data needs to | |
180 | set to PCA9532_TYPE_GPIO. | |
181 | ||
22e03f3b RA |
182 | config LEDS_GPIO |
183 | tristate "LED Support for GPIO connected LEDs" | |
0bae35e1 | 184 | depends on LEDS_CLASS |
76ec9d18 | 185 | depends on GPIOLIB |
22e03f3b RA |
186 | help |
187 | This option enables support for the LEDs connected to GPIO | |
188 | outputs. To be useful the particular board must have LEDs | |
a7d878af TP |
189 | and they must be connected to the GPIO lines. The LEDs must be |
190 | defined as platform devices and/or OpenFirmware platform devices. | |
191 | The code to use these bindings can be selected below. | |
192 | ||
5054d39e AO |
193 | config LEDS_LP3944 |
194 | tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" | |
0bae35e1 | 195 | depends on LEDS_CLASS |
d09e1666 | 196 | depends on I2C |
5054d39e | 197 | help |
7f1be819 AO |
198 | This option enables support for LEDs connected to the National |
199 | Semiconductor LP3944 Lighting Management Unit (LMU) also known as | |
200 | Fun Light Chip. | |
5054d39e AO |
201 | |
202 | To compile this driver as a module, choose M here: the | |
203 | module will be called leds-lp3944. | |
204 | ||
c93d08fa | 205 | config LEDS_LP55XX_COMMON |
33b3a561 KM |
206 | tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" |
207 | depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 | |
10c06d17 | 208 | select FW_LOADER |
c93d08fa | 209 | help |
33b3a561 | 210 | This option supports common operations for LP5521/5523/55231/5562/8501 |
c93d08fa MWK |
211 | devices. |
212 | ||
f4920f67 SO |
213 | config LEDS_LP5521 |
214 | tristate "LED Support for N.S. LP5521 LED driver chip" | |
215 | depends on LEDS_CLASS && I2C | |
c93d08fa | 216 | select LEDS_LP55XX_COMMON |
f4920f67 SO |
217 | help |
218 | If you say yes here you get support for the National Semiconductor | |
219 | LP5521 LED driver. It is 3 channel chip with programmable engines. | |
220 | Driver provides direct control via LED class and interface for | |
221 | programming the engines. | |
222 | ||
223 | config LEDS_LP5523 | |
ca705321 | 224 | tristate "LED Support for TI/National LP5523/55231 LED driver chip" |
f4920f67 | 225 | depends on LEDS_CLASS && I2C |
c93d08fa | 226 | select LEDS_LP55XX_COMMON |
f4920f67 | 227 | help |
ca705321 KM |
228 | If you say yes here you get support for TI/National Semiconductor |
229 | LP5523/55231 LED driver. | |
230 | It is 9 channel chip with programmable engines. | |
f4920f67 SO |
231 | Driver provides direct control via LED class and interface for |
232 | programming the engines. | |
233 | ||
ff45262a KM |
234 | config LEDS_LP5562 |
235 | tristate "LED Support for TI LP5562 LED driver chip" | |
236 | depends on LEDS_CLASS && I2C | |
237 | select LEDS_LP55XX_COMMON | |
238 | help | |
239 | If you say yes here you get support for TI LP5562 LED driver. | |
240 | It is 4 channels chip with programmable engines. | |
241 | Driver provides direct control via LED class and interface for | |
242 | programming the engines. | |
243 | ||
33b3a561 KM |
244 | config LEDS_LP8501 |
245 | tristate "LED Support for TI LP8501 LED driver chip" | |
246 | depends on LEDS_CLASS && I2C | |
247 | select LEDS_LP55XX_COMMON | |
248 | help | |
249 | If you say yes here you get support for TI LP8501 LED driver. | |
250 | It is 9 channel chip with programmable engines. | |
251 | Driver provides direct control via LED class and interface for | |
252 | programming the engines. | |
253 | It is similar as LP5523, but output power selection is available. | |
254 | And register layout and engine program schemes are different. | |
255 | ||
eb80411b KM |
256 | config LEDS_LP8788 |
257 | tristate "LED support for the TI LP8788 PMIC" | |
258 | depends on LEDS_CLASS | |
259 | depends on MFD_LP8788 | |
260 | help | |
261 | This option enables support for the Keyboard LEDs on the LP8788 PMIC. | |
262 | ||
7a8685ac DM |
263 | config LEDS_LP8860 |
264 | tristate "LED support for the TI LP8860 4 channel LED driver" | |
2969bb18 AL |
265 | depends on LEDS_CLASS && I2C |
266 | select REGMAP_I2C | |
7a8685ac DM |
267 | help |
268 | If you say yes here you get support for the TI LP8860 4 channel | |
269 | LED driver. | |
270 | This option enables support for the display cluster LEDs | |
271 | on the LP8860 4 channel LED driver using the I2C communication | |
272 | bus. | |
273 | ||
cec035de | 274 | config LEDS_CLEVO_MAIL |
95dc5768 | 275 | tristate "Mail LED on Clevo notebook" |
0bae35e1 | 276 | depends on LEDS_CLASS |
d09e1666 | 277 | depends on X86 && SERIO_I8042 && DMI |
cec035de MN |
278 | help |
279 | This driver makes the mail LED accessible from userspace | |
280 | programs through the leds subsystem. This LED have three | |
281 | known mode: off, blink at 0.5Hz and blink at 1Hz. | |
282 | ||
92e015cb MN |
283 | The driver supports two kinds of interface: using ledtrig-timer |
284 | or through /sys/class/leds/clevo::mail/brightness. As this LED | |
285 | cannot change it's brightness it blinks instead. The brightness | |
286 | value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means | |
287 | blink at 1Hz. | |
cec035de MN |
288 | |
289 | This module can drive the mail LED for the following notebooks: | |
290 | ||
b3ba31f8 | 291 | Clevo D400P |
cec035de MN |
292 | Clevo D410J |
293 | Clevo D410V | |
294 | Clevo D400V/D470V (not tested, but might work) | |
295 | Clevo M540N | |
296 | Clevo M5x0N (not tested, but might work) | |
297 | Positivo Mobile (Clevo M5x0V) | |
298 | ||
b3ba31f8 | 299 | If your model is not listed here you can try the "nodetect" |
692105b8 | 300 | module parameter. |
b3ba31f8 | 301 | |
cec035de MN |
302 | To compile this driver as a module, choose M here: the |
303 | module will be called leds-clevo-mail. | |
304 | ||
f46e9203 NC |
305 | config LEDS_PCA955X |
306 | tristate "LED Support for PCA955x I2C chips" | |
0bae35e1 | 307 | depends on LEDS_CLASS |
d09e1666 | 308 | depends on I2C |
f46e9203 NC |
309 | help |
310 | This option enables support for LEDs connected to PCA955x | |
311 | LED driver chips accessed via the I2C bus. Supported | |
312 | devices include PCA9550, PCA9551, PCA9552, and PCA9553. | |
313 | ||
56a1740c | 314 | config LEDS_PCA963X |
af67384f | 315 | tristate "LED support for PCA963x I2C chip" |
75cb2e1d PM |
316 | depends on LEDS_CLASS |
317 | depends on I2C | |
318 | help | |
af67384f RRD |
319 | This option enables support for LEDs connected to the PCA963x |
320 | LED driver chip accessed via the I2C bus. Supported | |
321 | devices include PCA9633 and PCA9634 | |
75cb2e1d | 322 | |
c746b551 MB |
323 | config LEDS_WM831X_STATUS |
324 | tristate "LED support for status LEDs on WM831x PMICs" | |
0bae35e1 | 325 | depends on LEDS_CLASS |
d09e1666 | 326 | depends on MFD_WM831X |
c746b551 MB |
327 | help |
328 | This option enables support for the status LEDs of the WM831x | |
329 | series of PMICs. | |
330 | ||
0081e802 MB |
331 | config LEDS_WM8350 |
332 | tristate "LED Support for WM8350 AudioPlus PMIC" | |
0bae35e1 | 333 | depends on LEDS_CLASS |
d09e1666 | 334 | depends on MFD_WM8350 |
0081e802 MB |
335 | help |
336 | This option enables support for LEDs driven by the Wolfson | |
337 | Microelectronics WM8350 AudioPlus PMIC. | |
338 | ||
9e84561c MR |
339 | config LEDS_DA903X |
340 | tristate "LED Support for DA9030/DA9034 PMIC" | |
0bae35e1 | 341 | depends on LEDS_CLASS |
d09e1666 | 342 | depends on PMIC_DA903X |
9e84561c MR |
343 | help |
344 | This option enables support for on-chip LED drivers found | |
345 | on Dialog Semiconductor DA9030/DA9034 PMICs. | |
346 | ||
5ba73631 DDC |
347 | config LEDS_DA9052 |
348 | tristate "Dialog DA9052/DA9053 LEDS" | |
349 | depends on LEDS_CLASS | |
350 | depends on PMIC_DA9052 | |
351 | help | |
352 | This option enables support for on-chip LED drivers found | |
353 | on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs. | |
354 | ||
ac2dd0f1 GL |
355 | config LEDS_DAC124S085 |
356 | tristate "LED Support for DAC124S085 SPI DAC" | |
0bae35e1 | 357 | depends on LEDS_CLASS |
d09e1666 | 358 | depends on SPI |
ac2dd0f1 GL |
359 | help |
360 | This option enables support for DAC124S085 SPI DAC from NatSemi, | |
361 | which can be used to control up to four LEDs. | |
362 | ||
41c42ff5 LF |
363 | config LEDS_PWM |
364 | tristate "PWM driven LED Support" | |
0bae35e1 | 365 | depends on LEDS_CLASS |
ad0ba85f | 366 | depends on PWM |
41c42ff5 LF |
367 | help |
368 | This option enables support for pwm driven LEDs | |
369 | ||
d4cc6a2e AO |
370 | config LEDS_REGULATOR |
371 | tristate "REGULATOR driven LED support" | |
0bae35e1 | 372 | depends on LEDS_CLASS |
d09e1666 | 373 | depends on REGULATOR |
d4cc6a2e AO |
374 | help |
375 | This option enables support for regulator driven LEDs. | |
376 | ||
0b56129b KK |
377 | config LEDS_BD2802 |
378 | tristate "LED driver for BD2802 RGB LED" | |
0bae35e1 | 379 | depends on LEDS_CLASS |
d09e1666 | 380 | depends on I2C |
0b56129b KK |
381 | help |
382 | This option enables support for BD2802GU RGB LED driver chips | |
383 | accessed via the I2C bus. | |
384 | ||
a328e95b DH |
385 | config LEDS_INTEL_SS4200 |
386 | tristate "LED driver for Intel NAS SS4200 series" | |
0bae35e1 | 387 | depends on LEDS_CLASS |
d09e1666 | 388 | depends on PCI && DMI |
a328e95b DH |
389 | help |
390 | This option enables support for the Intel SS4200 series of | |
391 | Network Attached Storage servers. You may control the hard | |
392 | drive or power LEDs on the front panel. Using this driver | |
393 | can stop the front LED from blinking after startup. | |
394 | ||
a8dd18fe DM |
395 | config LEDS_LT3593 |
396 | tristate "LED driver for LT3593 controllers" | |
0bae35e1 | 397 | depends on LEDS_CLASS |
76ec9d18 | 398 | depends on GPIOLIB |
a8dd18fe DM |
399 | help |
400 | This option enables support for LEDs driven by a Linear Technology | |
401 | LT3593 controller. This controller uses a special one-wire pulse | |
402 | coding protocol to set the brightness. | |
403 | ||
ed4a10b4 MH |
404 | config LEDS_ADP5520 |
405 | tristate "LED Support for ADP5520/ADP5501 PMIC" | |
0bae35e1 | 406 | depends on LEDS_CLASS |
d09e1666 | 407 | depends on PMIC_ADP5520 |
ed4a10b4 MH |
408 | help |
409 | This option enables support for on-chip LED drivers found | |
410 | on Analog Devices ADP5520/ADP5501 PMICs. | |
411 | ||
412 | To compile this driver as a module, choose M here: the module will | |
413 | be called leds-adp5520. | |
414 | ||
72dcd8d0 BR |
415 | config LEDS_DELL_NETBOOKS |
416 | tristate "External LED on Dell Business Netbooks" | |
0bae35e1 | 417 | depends on LEDS_CLASS |
72dcd8d0 BR |
418 | depends on X86 && ACPI_WMI |
419 | help | |
420 | This adds support for the Latitude 2100 and similar | |
421 | notebooks that have an external LED. | |
422 | ||
7fdcef8a | 423 | config LEDS_MC13783 |
ae6cdb03 | 424 | tristate "LED Support for MC13XXX PMIC" |
0bae35e1 | 425 | depends on LEDS_CLASS |
ae6cdb03 | 426 | depends on MFD_MC13XXX |
7fdcef8a PR |
427 | help |
428 | This option enable support for on-chip LED drivers found | |
a59ce658 | 429 | on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC. |
7fdcef8a | 430 | |
11efe71f SG |
431 | config LEDS_NS2 |
432 | tristate "LED support for Network Space v2 GPIO LEDs" | |
0bae35e1 | 433 | depends on LEDS_CLASS |
1093d8ca | 434 | depends on MACH_KIRKWOOD |
11efe71f SG |
435 | default y |
436 | help | |
437 | This option enable support for the dual-GPIO LED found on the | |
438 | Network Space v2 board (and parents). This include Internet Space v2, | |
439 | Network Space (Max) v2 and d2 Network v2 boards. | |
440 | ||
24467832 SG |
441 | config LEDS_NETXBIG |
442 | tristate "LED support for Big Network series LEDs" | |
2504f6da | 443 | depends on LEDS_CLASS |
1093d8ca | 444 | depends on MACH_KIRKWOOD |
24467832 SG |
445 | default y |
446 | help | |
447 | This option enable support for LEDs found on the LaCie 2Big | |
448 | and 5Big Network v2 boards. The LEDs are wired to a CPLD and are | |
449 | controlled through a GPIO extension bus. | |
450 | ||
7d9e7e9f PP |
451 | config LEDS_ASIC3 |
452 | bool "LED support for the HTC ASIC3" | |
9473c4c1 | 453 | depends on LEDS_CLASS=y |
7d9e7e9f PP |
454 | depends on MFD_ASIC3 |
455 | default y | |
456 | help | |
457 | This option enables support for the LEDs on the HTC ASIC3. The HTC | |
458 | ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver | |
459 | cannot be used. This driver supports hardware blinking with an on+off | |
460 | period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. | |
461 | ||
a6d511e5 N |
462 | config LEDS_TCA6507 |
463 | tristate "LED Support for TCA6507 I2C chip" | |
464 | depends on LEDS_CLASS && I2C | |
465 | help | |
466 | This option enables support for LEDs connected to TC6507 | |
467 | LED driver chips accessed via the I2C bus. | |
468 | Driver support brightness control and hardware-assisted blinking. | |
469 | ||
e370d010 AL |
470 | config LEDS_TLC591XX |
471 | tristate "LED driver for TLC59108 and TLC59116 controllers" | |
472 | depends on LEDS_CLASS && I2C | |
473 | select REGMAP_I2C | |
474 | help | |
475 | This option enables support for Texas Instruments TLC59108 | |
476 | and TLC59116 LED controllers. | |
477 | ||
a43f6a86 JA |
478 | config LEDS_MAX77693 |
479 | tristate "LED support for MAX77693 Flash" | |
480 | depends on LEDS_CLASS_FLASH | |
481 | depends on MFD_MAX77693 | |
482 | depends on OF | |
483 | help | |
484 | This option enables support for the flash part of the MAX77693 | |
485 | multifunction device. It has build in control for two leds in flash | |
486 | and torch mode. | |
487 | ||
8584cb82 DK |
488 | config LEDS_MAX8997 |
489 | tristate "LED support for MAX8997 PMIC" | |
490 | depends on LEDS_CLASS && MFD_MAX8997 | |
491 | help | |
492 | This option enables support for on-chip LED drivers on | |
493 | MAXIM MAX8997 PMIC. | |
494 | ||
b98d13c7 SJ |
495 | config LEDS_LM355x |
496 | tristate "LED support for LM355x Chips, LM3554 and LM3556" | |
32abb478 SJ |
497 | depends on LEDS_CLASS && I2C |
498 | select REGMAP_I2C | |
499 | help | |
b98d13c7 SJ |
500 | This option enables support for LEDs connected to LM355x. |
501 | LM355x includes Torch, Flash and Indicator functions. | |
32abb478 | 502 | |
e9a4593c SAS |
503 | config LEDS_OT200 |
504 | tristate "LED support for the Bachmann OT200" | |
d9e8928f | 505 | depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST) |
e9a4593c SAS |
506 | help |
507 | This option enables support for the LEDs on the Bachmann OT200. | |
508 | Say Y to enable LEDs on the Bachmann OT200. | |
509 | ||
38433639 AW |
510 | config LEDS_MENF21BMC |
511 | tristate "LED support for the MEN 14F021P00 BMC" | |
512 | depends on LEDS_CLASS && MFD_MENF21BMC | |
513 | help | |
514 | Say Y here to include support for the MEN 14F021P00 BMC LEDs. | |
515 | ||
516 | This driver can also be built as a module. If so the module | |
517 | will be called leds-menf21bmc. | |
518 | ||
f70ed8a6 VD |
519 | comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" |
520 | ||
b54cf35a JSM |
521 | config LEDS_BLINKM |
522 | tristate "LED support for the BlinkM I2C RGB LED" | |
523 | depends on LEDS_CLASS | |
524 | depends on I2C | |
525 | help | |
526 | This option enables support for the BlinkM RGB LED connected | |
527 | through I2C. Say Y to enable support for the BlinkM LED. | |
528 | ||
535f09cc LW |
529 | config LEDS_SYSCON |
530 | bool "LED support for LEDs on system controllers" | |
531 | depends on LEDS_CLASS=y | |
532 | depends on MFD_SYSCON | |
533 | depends on OF | |
534 | help | |
535 | This option enabled support for the LEDs on syscon type | |
536 | devices. This will only work with device tree enabled | |
537 | devices. | |
538 | ||
1dc7d837 | 539 | config LEDS_VERSATILE |
a501fd37 | 540 | tristate "LED support for the ARM Versatile and RealView" |
1dc7d837 LW |
541 | depends on ARCH_REALVIEW || ARCH_VERSATILE |
542 | depends on LEDS_CLASS | |
543 | help | |
544 | This option enabled support for the LEDs on the ARM Versatile | |
545 | and RealView boards. Say Y to enabled these. | |
546 | ||
93c64f1e CC |
547 | config LEDS_PM8941_WLED |
548 | tristate "LED support for the Qualcomm PM8941 WLED block" | |
549 | depends on LEDS_CLASS | |
550 | select REGMAP | |
551 | help | |
552 | This option enables support for the 'White' LED block | |
553 | on Qualcomm PM8941 PMICs. | |
554 | ||
d09e1666 | 555 | comment "LED Triggers" |
f07fb521 | 556 | source "drivers/leds/trigger/Kconfig" |
44e1e9f8 | 557 | |
66242f7e | 558 | endif # NEW_LEDS |