[linux-2.6-block.git] / drivers / isdn / hardware / eicon / xdi_msg.h

/* SPDX-License-Identifier: GPL-2.0 */
/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */

#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__
#define __DIVA_XDI_UM_CFG_MESSAGE_H__

/*
  Definition of messages used to communicate between
  XDI device driver and user mode configuration utility
*/

/*
  As acknowledge one DWORD - card ordinal will be read from the card
*/
#define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL	0

/*
  no acknowledge will be generated, memory block will be written in the
  memory at given offset
*/
#define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK	1

/*
  no acknowledge will be genatated, FPGA will be programmed
*/
#define DIVA_XDI_UM_CMD_WRITE_FPGA				2

/*
  As acknowledge block of SDRAM will be read in the user buffer
*/
#define DIVA_XDI_UM_CMD_READ_SDRAM				3

/*
  As acknowledge dword with serial number will be read in the user buffer
*/
#define DIVA_XDI_UM_CMD_GET_SERIAL_NR			4

/*
  As acknowledge struct consisting from 9 dwords with PCI info.
  dword[0...7] = 8 PCI BARS
  dword[9]		 = IRQ
*/
#define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG	5

/*
  Reset of the board + activation of primary
  boot loader
*/
#define DIVA_XDI_UM_CMD_RESET_ADAPTER			6

/*
  Called after code download to start adapter
  at specified address
  Start does set new set of features due to fact that we not know
  if protocol features have changed
*/
#define DIVA_XDI_UM_CMD_START_ADAPTER			7

/*
  Stop adapter, called if user
  wishes to stop adapter without unload
  of the driver, to reload adapter with
  different protocol
*/
#define DIVA_XDI_UM_CMD_STOP_ADAPTER			8

/*
  Get state of current adapter
  Acknowledge is one dword with following values:
  0 - adapter ready for download
  1 - adapter running
  2 - adapter dead
  3 - out of service, driver should be restarted or hardware problem
*/
#define DIVA_XDI_UM_CMD_GET_CARD_STATE		9

/*
  Reads XLOG entry from the card
*/
#define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY		10

/*
  Set untranslated protocol code features
*/
#define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES	11

typedef struct _diva_xdi_um_cfg_cmd_data_set_features {
	dword features;
} diva_xdi_um_cfg_cmd_data_set_features_t;

typedef struct _diva_xdi_um_cfg_cmd_data_start {
	dword offset;
	dword features;
} diva_xdi_um_cfg_cmd_data_start_t;

typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram {
	dword ram_number;
	dword offset;
	dword length;
} diva_xdi_um_cfg_cmd_data_write_sdram_t;

typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga {
	dword fpga_number;
	dword image_length;
} diva_xdi_um_cfg_cmd_data_write_fpga_t;

typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram {
	dword ram_number;
	dword offset;
	dword length;
} diva_xdi_um_cfg_cmd_data_read_sdram_t;

typedef union _diva_xdi_um_cfg_cmd_data {
	diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram;
	diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga;
	diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram;
	diva_xdi_um_cfg_cmd_data_start_t start;
	diva_xdi_um_cfg_cmd_data_set_features_t features;
} diva_xdi_um_cfg_cmd_data_t;

typedef struct _diva_xdi_um_cfg_cmd {
	dword adapter;		/* Adapter number 1...N */
	dword command;
	diva_xdi_um_cfg_cmd_data_t command_data;
	dword data_length;	/* Plain binary data will follow */
} diva_xdi_um_cfg_cmd_t;

#endif
Commit	Line	Data
b2441318	1	/* SPDX-License-Identifier: GPL-2.0 */
1da177e4 LT	2	/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */
1da177e4 LT	3
faaa5524	4	#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__
1da177e4 LT	5	#define __DIVA_XDI_UM_CFG_MESSAGE_H__
	6
	7	/*
	8	Definition of messages used to communicate between
	9	XDI device driver and user mode configuration utility
	10	*/
	11
	12	/*
	13	As acknowledge one DWORD - card ordinal will be read from the card
	14	*/
	15	#define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL 0
	16
	17	/*
	18	no acknowledge will be generated, memory block will be written in the
	19	memory at given offset
	20	*/
	21	#define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK 1
	22
	23	/*
	24	no acknowledge will be genatated, FPGA will be programmed
	25	*/
	26	#define DIVA_XDI_UM_CMD_WRITE_FPGA 2
	27
	28	/*
	29	As acknowledge block of SDRAM will be read in the user buffer
	30	*/
	31	#define DIVA_XDI_UM_CMD_READ_SDRAM 3
	32
	33	/*
	34	As acknowledge dword with serial number will be read in the user buffer
	35	*/
	36	#define DIVA_XDI_UM_CMD_GET_SERIAL_NR 4
	37
	38	/*
	39	As acknowledge struct consisting from 9 dwords with PCI info.
	40	dword[0...7] = 8 PCI BARS
	41	dword[9] = IRQ
	42	*/
	43	#define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG 5
	44
	45	/*
	46	Reset of the board + activation of primary
	47	boot loader
	48	*/
	49	#define DIVA_XDI_UM_CMD_RESET_ADAPTER 6
	50
	51	/*
	52	Called after code download to start adapter
	53	at specified address
	54	Start does set new set of features due to fact that we not know
	55	if protocol features have changed
	56	*/
	57	#define DIVA_XDI_UM_CMD_START_ADAPTER 7
	58
	59	/*
	60	Stop adapter, called if user
	61	wishes to stop adapter without unload
	62	of the driver, to reload adapter with
	63	different protocol
	64	*/
	65	#define DIVA_XDI_UM_CMD_STOP_ADAPTER 8
	66
	67	/*
	68	Get state of current adapter
69	Acknowledge is one dword with following values:
70	0 - adapter ready for download
71	1 - adapter running
72	2 - adapter dead
73	3 - out of service, driver should be restarted or hardware problem
74	*/
75	#define DIVA_XDI_UM_CMD_GET_CARD_STATE 9
76
77	/*
78	Reads XLOG entry from the card
79	*/
80	#define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY 10
81
82	/*
83	Set untranslated protocol code features
475be4d8	84	*/
1da177e4 LT	85	#define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES 11
	86
	87	typedef struct _diva_xdi_um_cfg_cmd_data_set_features {
	88	dword features;
	89	} diva_xdi_um_cfg_cmd_data_set_features_t;
	90
	91	typedef struct _diva_xdi_um_cfg_cmd_data_start {
	92	dword offset;
	93	dword features;
	94	} diva_xdi_um_cfg_cmd_data_start_t;
	95
	96	typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram {
	97	dword ram_number;
	98	dword offset;
	99	dword length;
	100	} diva_xdi_um_cfg_cmd_data_write_sdram_t;
	101
	102	typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga {
	103	dword fpga_number;
	104	dword image_length;
	105	} diva_xdi_um_cfg_cmd_data_write_fpga_t;
	106
	107	typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram {
	108	dword ram_number;
	109	dword offset;
	110	dword length;
	111	} diva_xdi_um_cfg_cmd_data_read_sdram_t;
	112
	113	typedef union _diva_xdi_um_cfg_cmd_data {
	114	diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram;
	115	diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga;
	116	diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram;
	117	diva_xdi_um_cfg_cmd_data_start_t start;
	118	diva_xdi_um_cfg_cmd_data_set_features_t features;
	119	} diva_xdi_um_cfg_cmd_data_t;
	120
	121	typedef struct _diva_xdi_um_cfg_cmd {
	122	dword adapter; /* Adapter number 1...N */
	123	dword command;
	124	diva_xdi_um_cfg_cmd_data_t command_data;
	125	dword data_length; /* Plain binary data will follow */
	126	} diva_xdi_um_cfg_cmd_t;
	127
	128	#endif