[linux-2.6-block.git] / drivers / input / touchscreen / egalax_ts.c

/*
 * Driver for EETI eGalax Multiple Touch Controller
 *
 * Copyright (C) 2011 Freescale Semiconductor, Inc.
 *
 * based on max11801_ts.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/* EETI eGalax serial touch screen controller is a I2C based multiple
 * touch screen controller, it supports 5 point multiple touch. */

/* TODO:
  - auto idle mode support
*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/input/mt.h>
#include <linux/of_gpio.h>

/*
 * Mouse Mode: some panel may configure the controller to mouse mode,
 * which can only report one point at a given time.
 * This driver will ignore events in this mode.
 */
#define REPORT_MODE_MOUSE		0x1
/*
 * Vendor Mode: this mode is used to transfer some vendor specific
 * messages.
 * This driver will ignore events in this mode.
 */
#define REPORT_MODE_VENDOR		0x3
/* Multiple Touch Mode */
#define REPORT_MODE_MTTOUCH		0x4

#define MAX_SUPPORT_POINTS		5

#define EVENT_VALID_OFFSET	7
#define EVENT_VALID_MASK	(0x1 << EVENT_VALID_OFFSET)
#define EVENT_ID_OFFSET		2
#define EVENT_ID_MASK		(0xf << EVENT_ID_OFFSET)
#define EVENT_IN_RANGE		(0x1 << 1)
#define EVENT_DOWN_UP		(0X1 << 0)

#define MAX_I2C_DATA_LEN	10

#define EGALAX_MAX_X	32760
#define EGALAX_MAX_Y	32760
#define EGALAX_MAX_TRIES 100

struct egalax_ts {
	struct i2c_client		*client;
	struct input_dev		*input_dev;
};

static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
{
	struct egalax_ts *ts = dev_id;
	struct input_dev *input_dev = ts->input_dev;
	struct i2c_client *client = ts->client;
	u8 buf[MAX_I2C_DATA_LEN];
	int id, ret, x, y, z;
	int tries = 0;
	bool down, valid;
	u8 state;

	do {
		ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
	} while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES);

	if (ret < 0)
		return IRQ_HANDLED;

	if (buf[0] != REPORT_MODE_MTTOUCH) {
		/* ignore mouse events and vendor events */
		return IRQ_HANDLED;
	}

	state = buf[1];
	x = (buf[3] << 8) | buf[2];
	y = (buf[5] << 8) | buf[4];
	z = (buf[7] << 8) | buf[6];

	valid = state & EVENT_VALID_MASK;
	id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
	down = state & EVENT_DOWN_UP;

	if (!valid || id > MAX_SUPPORT_POINTS) {
		dev_dbg(&client->dev, "point invalid\n");
		return IRQ_HANDLED;
	}

	input_mt_slot(input_dev, id);
	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);

	dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
		down ? "down" : "up", id, x, y, z);

	if (down) {
		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
		input_report_abs(input_dev, ABS_MT_PRESSURE, z);
	}

	input_mt_report_pointer_emulation(input_dev, true);
	input_sync(input_dev);

	return IRQ_HANDLED;
}

/* wake up controller by an falling edge of interrupt gpio.  */
static int egalax_wake_up_device(struct i2c_client *client)
{
	struct device_node *np = client->dev.of_node;
	int gpio;
	int ret;

	if (!np)
		return -ENODEV;

	gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
	if (!gpio_is_valid(gpio))
		return -ENODEV;

	ret = gpio_request(gpio, "egalax_irq");
	if (ret < 0) {
		dev_err(&client->dev,
			"request gpio failed, cannot wake up controller: %d\n",
			ret);
		return ret;
	}

	/* wake up controller via an falling edge on IRQ gpio. */
	gpio_direction_output(gpio, 0);
	gpio_set_value(gpio, 1);

	/* controller should be waken up, return irq.  */
	gpio_direction_input(gpio);
	gpio_free(gpio);

	return 0;
}

static int __devinit egalax_firmware_version(struct i2c_client *client)
{
	static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
	int ret;

	ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
	if (ret < 0)
		return ret;

	return 0;
}

static int __devinit egalax_ts_probe(struct i2c_client *client,
				       const struct i2c_device_id *id)
{
	struct egalax_ts *ts;
	struct input_dev *input_dev;
	int ret;
	int error;

	ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
	if (!ts) {
		dev_err(&client->dev, "Failed to allocate memory\n");
		return -ENOMEM;
	}

	input_dev = input_allocate_device();
	if (!input_dev) {
		dev_err(&client->dev, "Failed to allocate memory\n");
		error = -ENOMEM;
		goto err_free_ts;
	}

	ts->client = client;
	ts->input_dev = input_dev;

	/* controller may be in sleep, wake it up. */
	error = egalax_wake_up_device(client);
	if (error) {
		dev_err(&client->dev, "Failed to wake up the controller\n");
		goto err_free_dev;
	}

	ret = egalax_firmware_version(client);
	if (ret < 0) {
		dev_err(&client->dev, "Failed to read firmware version\n");
		error = -EIO;
		goto err_free_dev;
	}

	input_dev->name = "EETI eGalax Touch Screen";
	input_dev->id.bustype = BUS_I2C;
	input_dev->dev.parent = &client->dev;

	__set_bit(EV_ABS, input_dev->evbit);
	__set_bit(EV_KEY, input_dev->evbit);
	__set_bit(BTN_TOUCH, input_dev->keybit);

	input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
	input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
	input_set_abs_params(input_dev,
			     ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
	input_set_abs_params(input_dev,
			     ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0);
	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);

	input_set_drvdata(input_dev, ts);

	error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
				     "egalax_ts", ts);
	if (error < 0) {
		dev_err(&client->dev, "Failed to register interrupt\n");
		goto err_free_dev;
	}

	error = input_register_device(ts->input_dev);
	if (error)
		goto err_free_irq;

	i2c_set_clientdata(client, ts);
	return 0;

err_free_irq:
	free_irq(client->irq, ts);
err_free_dev:
	input_free_device(input_dev);
err_free_ts:
	kfree(ts);

	return error;
}

static __devexit int egalax_ts_remove(struct i2c_client *client)
{
	struct egalax_ts *ts = i2c_get_clientdata(client);

	free_irq(client->irq, ts);

	input_unregister_device(ts->input_dev);
	kfree(ts);

	return 0;
}

static const struct i2c_device_id egalax_ts_id[] = {
	{ "egalax_ts", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, egalax_ts_id);

#ifdef CONFIG_PM_SLEEP
static int egalax_ts_suspend(struct device *dev)
{
	static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
		0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
	};
	struct i2c_client *client = to_i2c_client(dev);
	int ret;

	ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN);
	return ret > 0 ? 0 : ret;
}

static int egalax_ts_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);

	return egalax_wake_up_device(client);
}
#endif

static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);

static struct of_device_id egalax_ts_dt_ids[] = {
	{ .compatible = "eeti,egalax_ts" },
	{ /* sentinel */ }
};

static struct i2c_driver egalax_ts_driver = {
	.driver = {
		.name	= "egalax_ts",
		.owner	= THIS_MODULE,
		.pm	= &egalax_ts_pm_ops,
		.of_match_table	= of_match_ptr(egalax_ts_dt_ids),
	},
	.id_table	= egalax_ts_id,
	.probe		= egalax_ts_probe,
	.remove		= egalax_ts_remove,
};

module_i2c_driver(egalax_ts_driver);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
MODULE_LICENSE("GPL");
Commit	Line	Data
59bae1db ZJ	1	/*
	2	* Driver for EETI eGalax Multiple Touch Controller
	3	*
	4	* Copyright (C) 2011 Freescale Semiconductor, Inc.
	5	*
	6	* based on max11801_ts.c
	7	*
	8	* This program is free software; you can redistribute it and/or modify
	9	* it under the terms of the GNU General Public License version 2 as
	10	* published by the Free Software Foundation.
	11	*/
	12
	13	/* EETI eGalax serial touch screen controller is a I2C based multiple
	14	* touch screen controller, it supports 5 point multiple touch. */
	15
	16	/* TODO:
	17	- auto idle mode support
	18	*/
	19
	20	#include <linux/module.h>
	21	#include <linux/init.h>
	22	#include <linux/i2c.h>
	23	#include <linux/interrupt.h>
	24	#include <linux/input.h>
	25	#include <linux/irq.h>
	26	#include <linux/gpio.h>
	27	#include <linux/delay.h>
	28	#include <linux/slab.h>
	29	#include <linux/bitops.h>
	30	#include <linux/input/mt.h>
ae495e84	31	#include <linux/of_gpio.h>
59bae1db ZJ	32
	33	/*
	34	* Mouse Mode: some panel may configure the controller to mouse mode,
	35	* which can only report one point at a given time.
	36	* This driver will ignore events in this mode.
	37	*/
	38	#define REPORT_MODE_MOUSE 0x1
	39	/*
	40	* Vendor Mode: this mode is used to transfer some vendor specific
	41	* messages.
	42	* This driver will ignore events in this mode.
	43	*/
	44	#define REPORT_MODE_VENDOR 0x3
	45	/* Multiple Touch Mode */
	46	#define REPORT_MODE_MTTOUCH 0x4
	47
	48	#define MAX_SUPPORT_POINTS 5
	49
	50	#define EVENT_VALID_OFFSET 7
	51	#define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET)
	52	#define EVENT_ID_OFFSET 2
	53	#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET)
	54	#define EVENT_IN_RANGE (0x1 << 1)
	55	#define EVENT_DOWN_UP (0X1 << 0)
	56
	57	#define MAX_I2C_DATA_LEN 10
	58
	59	#define EGALAX_MAX_X 32760
	60	#define EGALAX_MAX_Y 32760
	61	#define EGALAX_MAX_TRIES 100
	62
	63	struct egalax_ts {
	64	struct i2c_client *client;
	65	struct input_dev *input_dev;
	66	};
	67
	68	static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
	69	{
	70	struct egalax_ts *ts = dev_id;
	71	struct input_dev *input_dev = ts->input_dev;
	72	struct i2c_client *client = ts->client;
	73	u8 buf[MAX_I2C_DATA_LEN];
	74	int id, ret, x, y, z;
	75	int tries = 0;
	76	bool down, valid;
	77	u8 state;
	78
	79	do {
	80	ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
	81	} while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES);
	82
	83	if (ret < 0)
	84	return IRQ_HANDLED;
	85
	86	if (buf[0] != REPORT_MODE_MTTOUCH) {
	87	/* ignore mouse events and vendor events */
	88	return IRQ_HANDLED;
	89	}
	90
	91	state = buf[1];
	92	x = (buf[3] << 8) \| buf[2];
	93	y = (buf[5] << 8) \| buf[4];
	94	z = (buf[7] << 8) \| buf[6];
	95
96	valid = state & EVENT_VALID_MASK;
97	id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
98	down = state & EVENT_DOWN_UP;
99
100	if (!valid \|\| id > MAX_SUPPORT_POINTS) {
101	dev_dbg(&client->dev, "point invalid\n");
102	return IRQ_HANDLED;
103	}
104
105	input_mt_slot(input_dev, id);
106	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);
107
108	dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
109	down ? "down" : "up", id, x, y, z);
110
111	if (down) {
112	input_report_abs(input_dev, ABS_MT_POSITION_X, x);
113	input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
114	input_report_abs(input_dev, ABS_MT_PRESSURE, z);
115	}
116
117	input_mt_report_pointer_emulation(input_dev, true);
118	input_sync(input_dev);
119
120	return IRQ_HANDLED;
121	}
122
123	/* wake up controller by an falling edge of interrupt gpio. */
124	static int egalax_wake_up_device(struct i2c_client *client)
125	{
ae495e84 HW	126	struct device_node *np = client->dev.of_node;
ae495e84 HW	127	int gpio;
59bae1db ZJ	128	int ret;
59bae1db ZJ	129
ae495e84 HW	130	if (!np)
	131	return -ENODEV;
	132
	133	gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
	134	if (!gpio_is_valid(gpio))
	135	return -ENODEV;
	136
59bae1db ZJ	137	ret = gpio_request(gpio, "egalax_irq");
	138	if (ret < 0) {
	139	dev_err(&client->dev,
	140	"request gpio failed, cannot wake up controller: %d\n",
	141	ret);
	142	return ret;
	143	}
	144
	145	/* wake up controller via an falling edge on IRQ gpio. */
	146	gpio_direction_output(gpio, 0);
	147	gpio_set_value(gpio, 1);
	148
	149	/* controller should be waken up, return irq. */
	150	gpio_direction_input(gpio);
	151	gpio_free(gpio);
	152
	153	return 0;
	154	}
	155
	156	static int __devinit egalax_firmware_version(struct i2c_client *client)
	157	{
	158	static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
	159	int ret;
	160
	161	ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
	162	if (ret < 0)
	163	return ret;
	164
	165	return 0;
	166	}
	167
	168	static int __devinit egalax_ts_probe(struct i2c_client *client,
	169	const struct i2c_device_id *id)
	170	{
	171	struct egalax_ts *ts;
	172	struct input_dev *input_dev;
	173	int ret;
	174	int error;
	175
	176	ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
	177	if (!ts) {
	178	dev_err(&client->dev, "Failed to allocate memory\n");
	179	return -ENOMEM;
	180	}
	181
	182	input_dev = input_allocate_device();
	183	if (!input_dev) {
	184	dev_err(&client->dev, "Failed to allocate memory\n");
	185	error = -ENOMEM;
	186	goto err_free_ts;
	187	}
	188
	189	ts->client = client;
	190	ts->input_dev = input_dev;
	191
	192	/* controller may be in sleep, wake it up. */
ae495e84 HW	193	error = egalax_wake_up_device(client);
	194	if (error) {
	195	dev_err(&client->dev, "Failed to wake up the controller\n");
	196	goto err_free_dev;
	197	}
59bae1db ZJ	198
	199	ret = egalax_firmware_version(client);
	200	if (ret < 0) {
	201	dev_err(&client->dev, "Failed to read firmware version\n");
	202	error = -EIO;
	203	goto err_free_dev;
	204	}
	205
	206	input_dev->name = "EETI eGalax Touch Screen";
	207	input_dev->id.bustype = BUS_I2C;
	208	input_dev->dev.parent = &client->dev;
	209
	210	__set_bit(EV_ABS, input_dev->evbit);
	211	__set_bit(EV_KEY, input_dev->evbit);
	212	__set_bit(BTN_TOUCH, input_dev->keybit);
	213
	214	input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
	215	input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
	216	input_set_abs_params(input_dev,
	217	ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
	218	input_set_abs_params(input_dev,
	219	ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0);
b4adbbef	220	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
59bae1db ZJ	221
	222	input_set_drvdata(input_dev, ts);
	223
	224	error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
	225	IRQF_TRIGGER_LOW \| IRQF_ONESHOT,
	226	"egalax_ts", ts);
	227	if (error < 0) {
	228	dev_err(&client->dev, "Failed to register interrupt\n");
	229	goto err_free_dev;
	230	}
	231
	232	error = input_register_device(ts->input_dev);
	233	if (error)
	234	goto err_free_irq;
	235
	236	i2c_set_clientdata(client, ts);
	237	return 0;
	238
	239	err_free_irq:
	240	free_irq(client->irq, ts);
	241	err_free_dev:
	242	input_free_device(input_dev);
	243	err_free_ts:
	244	kfree(ts);
	245
	246	return error;
	247	}
	248
	249	static __devexit int egalax_ts_remove(struct i2c_client *client)
	250	{
	251	struct egalax_ts *ts = i2c_get_clientdata(client);
	252
	253	free_irq(client->irq, ts);
	254
	255	input_unregister_device(ts->input_dev);
	256	kfree(ts);
	257
	258	return 0;
	259	}
	260
	261	static const struct i2c_device_id egalax_ts_id[] = {
	262	{ "egalax_ts", 0 },
	263	{ }
	264	};
	265	MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
	266
	267	#ifdef CONFIG_PM_SLEEP
	268	static int egalax_ts_suspend(struct device *dev)
	269	{
	270	static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
	271	0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
	272	};
	273	struct i2c_client *client = to_i2c_client(dev);
	274	int ret;
	275
	276	ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN);
	277	return ret > 0 ? 0 : ret;
	278	}
	279
	280	static int egalax_ts_resume(struct device *dev)
	281	{
	282	struct i2c_client *client = to_i2c_client(dev);
	283
	284	return egalax_wake_up_device(client);
285	}
286	#endif
287
288	static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
289
ae495e84 HW	290	static struct of_device_id egalax_ts_dt_ids[] = {
	291	{ .compatible = "eeti,egalax_ts" },
	292	{ /* sentinel */ }
	293	};
	294
59bae1db ZJ	295	static struct i2c_driver egalax_ts_driver = {
	296	.driver = {
	297	.name = "egalax_ts",
	298	.owner = THIS_MODULE,
	299	.pm = &egalax_ts_pm_ops,
ae495e84	300	.of_match_table = of_match_ptr(egalax_ts_dt_ids),
59bae1db ZJ	301	},
	302	.id_table = egalax_ts_id,
	303	.probe = egalax_ts_probe,
1cb0aa88	304	.remove = egalax_ts_remove,
59bae1db ZJ	305	};
59bae1db ZJ	306
1b92c1cf	307	module_i2c_driver(egalax_ts_driver);
59bae1db ZJ	308
	309	MODULE_AUTHOR("Freescale Semiconductor, Inc.");
	310	MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
	311	MODULE_LICENSE("GPL");