[linux-2.6-block.git] / drivers / input / touchscreen / Kconfig

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_88PM860X
	tristate "Marvell 88PM860x touchscreen"
	depends on MFD_88PM860X
	help
	  Say Y here if you have a 88PM860x PMIC and want to enable
	  support for the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called 88pm860x-ts.

config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
	  and your board-specific setup code includes that in its
	  table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_AD7877
	tristate "AD7877 based touchscreens"
	depends on SPI_MASTER
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7877 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7877.

config TOUCHSCREEN_AD7879
	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
	help
	  Say Y here if you want to support a touchscreen interface using
	  the AD7879-1/AD7889-1 controller.

	  You should select a bus connection too.

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879.

config TOUCHSCREEN_AD7879_I2C
	tristate "support I2C bus connection"
	depends on TOUCHSCREEN_AD7879 && I2C
	help
	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879-i2c.

config TOUCHSCREEN_AD7879_SPI
	tristate "support SPI bus connection"
	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
	help
	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879-spi.

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CY8CTMG110
	tristate "cy8ctmg110 touchscreen"
	depends on I2C
	depends on GPIOLIB

	help
	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
	  an AAVA device.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called cy8ctmg110_ts.

config TOUCHSCREEN_DA9034
	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	depends on PMIC_DA903X
	default y
	help
	  Say Y here to enable the support for the touchscreen found
	  on Dialog Semiconductor DA9034 PMIC.

config TOUCHSCREEN_DYNAPRO
	tristate "Dynapro serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Dynapro serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called dynapro.

config TOUCHSCREEN_HAMPSHIRE
	tristate "Hampshire serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Hampshire serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called hampshire.

config TOUCHSCREEN_EETI
	tristate "EETI touchscreen panel support"
	depends on I2C
	help
	  Say Y here to enable support for I2C connected EETI touch panels.

	  To compile this driver as a module, choose M here: the
	  module will be called eeti_ts.

config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	  Say Y here if you have the Fujitsu touchscreen (such as one
	  installed in Lifebook P series laptop) connected to your
	  system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called fujitsu-ts.

config TOUCHSCREEN_S3C2410
	tristate "Samsung S3C2410/generic touchscreen input driver"
	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
	select S3C_ADC
	help
	  Say Y here if you have the s3c2410 touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called s3c2410_ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_WACOM_W8001
	tristate "Wacom W8001 penabled serial touchscreen"
	select SERIO
	help
	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
	  connected to your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wacom_w8001.

config TOUCHSCREEN_MCS5000
	tristate "MELFAS MCS-5000 touchscreen"
	depends on I2C
	help
	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
	  chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mcs5000_ts.

config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an iNexio serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called inexio.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want
	  to support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_ts.

config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	  Clio / Shangrila and want to support the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called htcpen.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_QT602240
	tristate "QT602240 I2C Touchscreen"
	depends on I2C
	help
	  Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
	  connected to your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called qt602240_ts.

config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	  Say Y here to enable MIGO-R touchscreen support.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called migor_ts.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
	help
	  Say Y here if you have a 4-wire touchscreen connected to the
          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called atmel_tsadcc.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	  Say Y here if you have a Wolfson Microelectronics WM97xx
	  touchscreen connected to your system. Note that this option
	  only enables core driver, you will also need to select
	  support for appropriate chip below.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wm97xx-ts.

config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9705 touchscreen controller.

config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9712 touchscreen controller.

config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9713 touchscreen controller.

config TOUCHSCREEN_WM97XX_ATMEL
	tristate "WM97xx Atmel accelerated touch"
	depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Atmel AT91 or AVR32 systems with an AC97C module.

	  Be aware that this will use channel B in the controller for
	  streaming data, this must not conflict with other AC97C drivers.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the module will
	  be called atmel-wm97xx.

config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone/Palm accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mainstone-wm97xx.

config TOUCHSCREEN_WM97XX_ZYLONITE
	tristate "Zylonite accelerated touch"
	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	select TOUCHSCREEN_WM9713
	help
	  Say Y here for support for streaming mode with the touchscreen
	  on Zylonite systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called zylonite-wm97xx.

config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	  USB Touchscreen driver for:
	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	  - PanJit TouchSet USB
	  - 3M MicroTouch USB (EX II series)
	  - ITM
	  - some other eTurboTouch
	  - Gunze AHL61
	  - DMC TSC-10/25
	  - IRTOUCHSYSTEMS/UNITOP
	  - IdealTEK URTC1000
	  - GoTop Super_Q2/GogoPen/PenPower tablets
	  - JASTEC USB Touch Controller/DigiTech DTR-02U
	  - Zytronic controllers

	  Have a look at <http://linux.chapter7.ch/touchkit/> for
	  a usage description and the required user-space stuff.

	  To compile this driver as a module, choose M here: the
	  module will be called usbtouchscreen.

config TOUCHSCREEN_MC13783
	tristate "Freescale MC13783 touchscreen input driver"
	depends on MFD_MC13783
	help
	  Say Y here if you have an Freescale MC13783 PMIC on your
	  board and want to use its touchscreen

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mc13783_ts.

config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_JASTEC
	default y
	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_E2I
	default y
	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ZYTRONIC
	default y
	bool "Zytronic controller" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETT_TC45USB
	default y
	bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_NEXIO
	default y
	bool "NEXIO/iNexio device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchit213.

config TOUCHSCREEN_TSC2007
	tristate "TSC2007 based touchscreens"
	depends on I2C
	help
	  Say Y here if you have a TSC2007 based touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called tsc2007.

config TOUCHSCREEN_W90X900
	tristate "W90P910 touchscreen driver"
	depends on HAVE_CLK
	help
	  Say Y here if you have a W90P910 based touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called w90p910_ts.

config TOUCHSCREEN_PCAP
	tristate "Motorola PCAP touchscreen"
	depends on EZX_PCAP
	help
	  Say Y here if you have a Motorola EZX telephone and
	  want to enable support for the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called pcap_ts.

config TOUCHSCREEN_TPS6507X
	tristate "TPS6507x based touchscreens"
	depends on I2C
	help
	  Say Y here if you have a TPS6507x based touchscreen
	  controller.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called tps6507x_ts.

config TOUCHSCREEN_STMPE
	tristate "STMicroelectronics STMPE touchscreens"
	depends on MFD_STMPE
	help
	  Say Y here if you want support for STMicroelectronics
	  STMPE touchscreen controllers.

	  To compile this driver as a module, choose M here: the
	  module will be called stmpe-ts.

endif
Commit	Line	Data
1da177e4	1	#
d05e84e6	2	# Touchscreen driver configuration
1da177e4 LT	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
866a98ae HZ	14	config TOUCHSCREEN_88PM860X
	15	tristate "Marvell 88PM860x touchscreen"
	16	depends on MFD_88PM860X
	17	help
	18	Say Y here if you have a 88PM860x PMIC and want to enable
	19	support for the built-in touchscreen.
	20
	21	If unsure, say N.
	22
	23	To compile this driver as a module, choose M here: the
	24	module will be called 88pm860x-ts.
	25
ffa458c1	26	config TOUCHSCREEN_ADS7846
06a09124	27	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
ffa458c1	28	depends on SPI_MASTER
2c8dc071	29	depends on HWMON = n \|\| HWMON
ffa458c1 DB	30	help
ffa458c1 DB	31	Say Y here if you have a touchscreen interface using the
06a09124 MH	32	ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
	33	and your board-specific setup code includes that in its
	34	table of SPI devices.
ffa458c1	35
2c8dc071 DB	36	If HWMON is selected, and the driver is told the reference voltage
2c8dc071 DB	37	on your board, you will also get hwmon interfaces for the voltage
06a09124	38	(and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
2c8dc071	39
ffa458c1 DB	40	If unsure, say N (but it's safe to say "Y").
	41
	42	To compile this driver as a module, choose M here: the
	43	module will be called ads7846.
	44
331b78ed MH	45	config TOUCHSCREEN_AD7877
	46	tristate "AD7877 based touchscreens"
	47	depends on SPI_MASTER
	48	help
	49	Say Y here if you have a touchscreen interface using the
	50	AD7877 controller, and your board-specific initialization
	51	code includes that in its table of SPI devices.
	52
	53	If unsure, say N (but it's safe to say "Y").
	54
	55	To compile this driver as a module, choose M here: the
	56	module will be called ad7877.
	57
4397c98a MF	58	config TOUCHSCREEN_AD7879
4397c98a MF	59	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
b4be468c	60	help
4397c98a MF	61	Say Y here if you want to support a touchscreen interface using
4397c98a MF	62	the AD7879-1/AD7889-1 controller.
b4be468c	63
4397c98a	64	You should select a bus connection too.
b4be468c MH	65
	66	To compile this driver as a module, choose M here: the
	67	module will be called ad7879.
	68
4397c98a MF	69	config TOUCHSCREEN_AD7879_I2C
	70	tristate "support I2C bus connection"
	71	depends on TOUCHSCREEN_AD7879 && I2C
	72	help
	73	Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
	74
	75	To compile this driver as a module, choose M here: the
	76	module will be called ad7879-i2c.
	77
b4be468c	78	config TOUCHSCREEN_AD7879_SPI
4397c98a MF	79	tristate "support SPI bus connection"
4397c98a MF	80	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
b4be468c	81	help
4397c98a	82	Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
b4be468c MH	83
	84	If unsure, say N (but it's safe to say "Y").
	85
	86	To compile this driver as a module, choose M here: the
4397c98a	87	module will be called ad7879-spi.
b4be468c	88
1da177e4 LT	89	config TOUCHSCREEN_BITSY
	90	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	91	depends on SA1100_BITSY
	92	select SERIO
	93	help
	94	Say Y here if you have the h3600 (Bitsy) touchscreen.
	95
	96	If unsure, say N.
	97
	98	To compile this driver as a module, choose M here: the
	99	module will be called h3600_ts_input.
	100
60347c19 SK	101	config TOUCHSCREEN_CY8CTMG110
	102	tristate "cy8ctmg110 touchscreen"
	103	depends on I2C
	104	depends on GPIOLIB
	105
	106	help
	107	Say Y here if you have a cy8ctmg110 capacitive touchscreen on
	108	an AAVA device.
	109
	110	If unsure, say N.
	111
	112	To compile this driver as a module, choose M here: the
	113	module will be called cy8ctmg110_ts.
	114
9bcc00b9 EM	115	config TOUCHSCREEN_DA9034
	116	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	117	depends on PMIC_DA903X
	118	default y
	119	help
	120	Say Y here to enable the support for the touchscreen found
	121	on Dialog Semiconductor DA9034 PMIC.
	122
a5f523bc TG	123	config TOUCHSCREEN_DYNAPRO
	124	tristate "Dynapro serial touchscreen"
	125	select SERIO
	126	help
	127	Say Y here if you have a Dynapro serial touchscreen connected to
	128	your system.
	129
	130	If unsure, say N.
	131
	132	To compile this driver as a module, choose M here: the
	133	module will be called dynapro.
	134
422dee56 AB	135	config TOUCHSCREEN_HAMPSHIRE
	136	tristate "Hampshire serial touchscreen"
	137	select SERIO
	138	help
	139	Say Y here if you have a Hampshire serial touchscreen connected to
	140	your system.
	141
	142	If unsure, say N.
	143
	144	To compile this driver as a module, choose M here: the
	145	module will be called hampshire.
	146
10494dce DM	147	config TOUCHSCREEN_EETI
	148	tristate "EETI touchscreen panel support"
	149	depends on I2C
	150	help
	151	Say Y here to enable support for I2C connected EETI touch panels.
	152
	153	To compile this driver as a module, choose M here: the
	154	module will be called eeti_ts.
	155
85f202d5 DT	156	config TOUCHSCREEN_FUJITSU
	157	tristate "Fujitsu serial touchscreen"
	158	select SERIO
	159	help
	160	Say Y here if you have the Fujitsu touchscreen (such as one
	161	installed in Lifebook P series laptop) connected to your
	162	system.
	163
	164	If unsure, say N.
	165
	166	To compile this driver as a module, choose M here: the
	167	module will be called fujitsu-ts.
	168
f5f96b93	169	config TOUCHSCREEN_S3C2410
504d36e9 BD	170	tristate "Samsung S3C2410/generic touchscreen input driver"
504d36e9 BD	171	depends on ARCH_S3C2410 \|\| SAMSUNG_DEV_TS
829ab5b5	172	select S3C_ADC
f5f96b93 AP	173	help
	174	Say Y here if you have the s3c2410 touchscreen.
	175
	176	If unsure, say N.
	177
	178	To compile this driver as a module, choose M here: the
	179	module will be called s3c2410_ts.
	180
1da177e4 LT	181	config TOUCHSCREEN_GUNZE
	182	tristate "Gunze AHL-51S touchscreen"
	183	select SERIO
	184	help
	185	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	186	your system.
	187
	188	If unsure, say N.
	189
	190	To compile this driver as a module, choose M here: the
	191	module will be called gunze.
	192
	193	config TOUCHSCREEN_ELO
	194	tristate "Elo serial touchscreens"
	195	select SERIO
	196	help
	197	Say Y here if you have an Elo serial touchscreen connected to
	198	your system.
	199
	200	If unsure, say N.
	201
	202	To compile this driver as a module, choose M here: the
153ab429	203	module will be called elo.
1da177e4	204
3eb1aa43 JK	205	config TOUCHSCREEN_WACOM_W8001
	206	tristate "Wacom W8001 penabled serial touchscreen"
	207	select SERIO
	208	help
	209	Say Y here if you have an Wacom W8001 penabled serial touchscreen
	210	connected to your system.
	211
	212	If unsure, say N.
	213
	214	To compile this driver as a module, choose M here: the
	215	module will be called wacom_w8001.
	216
38e783b3 JS	217	config TOUCHSCREEN_MCS5000
	218	tristate "MELFAS MCS-5000 touchscreen"
	219	depends on I2C
	220	help
	221	Say Y here if you have the MELFAS MCS-5000 touchscreen controller
	222	chip in your system.
	223
	224	If unsure, say N.
	225
	226	To compile this driver as a module, choose M here: the
	227	module will be called mcs5000_ts.
3eb1aa43	228
1da177e4 LT	229	config TOUCHSCREEN_MTOUCH
	230	tristate "MicroTouch serial touchscreens"
	231	select SERIO
	232	help
	233	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	234	your system.
	235
	236	If unsure, say N.
	237
	238	To compile this driver as a module, choose M here: the
	239	module will be called mtouch.
	240
3cadd2d9 RL	241	config TOUCHSCREEN_INEXIO
	242	tristate "iNexio serial touchscreens"
	243	select SERIO
	244	help
	245	Say Y here if you have an iNexio serial touchscreen connected to
	246	your system.
	247
	248	If unsure, say N.
	249
	250	To compile this driver as a module, choose M here: the
	251	module will be called inexio.
	252
1da177e4 LT	253	config TOUCHSCREEN_MK712
	254	tristate "ICS MicroClock MK712 touchscreen"
	255	help
	256	Say Y here if you have the ICS MicroClock MK712 touchscreen
	257	controller chip in your system.
	258
	259	If unsure, say N.
	260
	261	To compile this driver as a module, choose M here: the
	262	module will be called mk712.
	263
	264	config TOUCHSCREEN_HP600
4ff891eb	265	tristate "HP Jornada 6xx touchscreen"
0025835c	266	depends on SH_HP6XX && SH_ADC
1da177e4	267	help
4ff891eb	268	Say Y here if you have a HP Jornada 620/660/680/690 and want to
1da177e4 LT	269	support the built-in touchscreen.
1da177e4 LT	270
1da177e4 LT	271	To compile this driver as a module, choose M here: the
	272	module will be called hp680_ts_input.
	273
5637f02a	274	config TOUCHSCREEN_HP7XX
4ff891eb	275	tristate "HP Jornada 7xx touchscreen"
5637f02a KE	276	depends on SA1100_JORNADA720_SSP
	277	help
	278	Say Y here if you have a HP Jornada 710/720/728 and want
	279	to support the built-in touchscreen.
	280
	281	To compile this driver as a module, choose M here: the
	282	module will be called jornada720_ts.
	283
5a18c343 POF	284	config TOUCHSCREEN_HTCPEN
	285	tristate "HTC Shift X9500 touchscreen"
	286	depends on ISA
	287	help
	288	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	289	Clio / Shangrila and want to support the built-in touchscreen.
	290
	291	If unsure, say N.
	292
	293	To compile this driver as a module, choose M here: the
	294	module will be called htcpen.
	295
ee479999 RK	296	config TOUCHSCREEN_PENMOUNT
	297	tristate "Penmount serial touchscreen"
	298	select SERIO
	299	help
	300	Say Y here if you have a Penmount serial touchscreen connected to
	301	your system.
	302
	303	If unsure, say N.
	304
	305	To compile this driver as a module, choose M here: the
	306	module will be called penmount.
	307
4cf51c38 JS	308	config TOUCHSCREEN_QT602240
	309	tristate "QT602240 I2C Touchscreen"
	310	depends on I2C
	311	help
	312	Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
	313	connected to your system.
	314
	315	If unsure, say N.
	316
	317	To compile this driver as a module, choose M here: the
	318	module will be called qt602240_ts.
	319
885c316d MD	320	config TOUCHSCREEN_MIGOR
	321	tristate "Renesas MIGO-R touchscreen"
	322	depends on SH_MIGOR && I2C
	323	help
	324	Say Y here to enable MIGO-R touchscreen support.
	325
	326	If unsure, say N.
	327
	328	To compile this driver as a module, choose M here: the
	329	module will be called migor_ts.
	330
4003dff4 RK	331	config TOUCHSCREEN_TOUCHRIGHT
	332	tristate "Touchright serial touchscreen"
	333	select SERIO
	334	help
	335	Say Y here if you have a Touchright serial touchscreen connected to
	336	your system.
	337
	338	If unsure, say N.
	339
	340	To compile this driver as a module, choose M here: the
	341	module will be called touchright.
	342
11ea3173 RK	343	config TOUCHSCREEN_TOUCHWIN
	344	tristate "Touchwin serial touchscreen"
	345	select SERIO
	346	help
	347	Say Y here if you have a Touchwin serial touchscreen connected to
	348	your system.
	349
	350	If unsure, say N.
	351
	352	To compile this driver as a module, choose M here: the
	353	module will be called touchwin.
	354
72d18a7b DL	355	config TOUCHSCREEN_ATMEL_TSADCC
72d18a7b DL	356	tristate "Atmel Touchscreen Interface"
985f37f8	357	depends on ARCH_AT91SAM9RL \|\| ARCH_AT91SAM9G45
72d18a7b DL	358	help
	359	Say Y here if you have a 4-wire touchscreen connected to the
	360	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
	361
	362	If unsure, say N.
	363
	364	To compile this driver as a module, choose M here: the
	365	module will be called atmel_tsadcc.
	366
f40219bf NP	367	config TOUCHSCREEN_UCB1400
f40219bf NP	368	tristate "Philips UCB1400 touchscreen"
64c12e9b	369	depends on AC97_BUS
d9105c2b	370	depends on UCB1400_CORE
f40219bf NP	371	help
	372	This enables support for the Philips UCB1400 touchscreen interface.
	373	The UCB1400 is an AC97 audio codec. The touchscreen interface
	374	will be initialized only after the ALSA subsystem has been
	375	brought up and the UCB1400 detected. You therefore have to
	376	configure ALSA support as well (either built-in or modular,
	377	independently of whether this driver is itself built-in or
	378	modular) for this driver to work.
	379
	380	To compile this driver as a module, choose M here: the
	381	module will be called ucb1400_ts.
	382
febf1dff MB	383	config TOUCHSCREEN_WM97XX
	384	tristate "Support for WM97xx AC97 touchscreen controllers"
	385	depends on AC97_BUS
	386	help
	387	Say Y here if you have a Wolfson Microelectronics WM97xx
	388	touchscreen connected to your system. Note that this option
	389	only enables core driver, you will also need to select
	390	support for appropriate chip below.
	391
	392	If unsure, say N.
	393
	394	To compile this driver as a module, choose M here: the
	395	module will be called wm97xx-ts.
	396
9448cefc MB	397	config TOUCHSCREEN_WM9705
	398	bool "WM9705 Touchscreen interface support"
	399	depends on TOUCHSCREEN_WM97XX
558a171d	400	default y
9448cefc	401	help
558a171d MB	402	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	403	WM9705 touchscreen controller.
9448cefc	404
de22b9ef MB	405	config TOUCHSCREEN_WM9712
	406	bool "WM9712 Touchscreen interface support"
	407	depends on TOUCHSCREEN_WM97XX
558a171d	408	default y
de22b9ef	409	help
558a171d MB	410	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	411	WM9712 touchscreen controller.
de22b9ef	412
dca98e91 MB	413	config TOUCHSCREEN_WM9713
	414	bool "WM9713 Touchscreen interface support"
	415	depends on TOUCHSCREEN_WM97XX
558a171d	416	default y
dca98e91	417	help
558a171d MB	418	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	419	WM9713 touchscreen controller.
dca98e91	420
864fe73c HCE	421	config TOUCHSCREEN_WM97XX_ATMEL
	422	tristate "WM97xx Atmel accelerated touch"
	423	depends on TOUCHSCREEN_WM97XX && (AVR32 \|\| ARCH_AT91)
	424	help
	425	Say Y here for support for streaming mode with WM97xx touchscreens
	426	on Atmel AT91 or AVR32 systems with an AC97C module.
	427
	428	Be aware that this will use channel B in the controller for
	429	streaming data, this must not conflict with other AC97C drivers.
	430
	431	If unsure, say N.
	432
	433	To compile this driver as a module, choose M here: the module will
	434	be called atmel-wm97xx.
	435
4db8a5f2	436	config TOUCHSCREEN_WM97XX_MAINSTONE
b833306f	437	tristate "WM97xx Mainstone/Palm accelerated touch"
4db8a5f2 MB	438	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	439	help
	440	Say Y here for support for streaming mode with WM97xx touchscreens
b833306f	441	on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
4db8a5f2 MB	442
	443	If unsure, say N.
	444
	445	To compile this driver as a module, choose M here: the
	446	module will be called mainstone-wm97xx.
	447
22e39d34 MB	448	config TOUCHSCREEN_WM97XX_ZYLONITE
	449	tristate "Zylonite accelerated touch"
	450	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	451	select TOUCHSCREEN_WM9713
	452	help
	453	Say Y here for support for streaming mode with the touchscreen
	454	on Zylonite systems.
	455
	456	If unsure, say N.
	457
	458	To compile this driver as a module, choose M here: the
	459	module will be called zylonite-wm97xx.
	460
d05e84e6 DT	461	config TOUCHSCREEN_USB_COMPOSITE
d05e84e6 DT	462	tristate "USB Touchscreen Driver"
7a86edef	463	depends on USB_ARCH_HAS_HCD
d05e84e6 DT	464	select USB
	465	help
	466	USB Touchscreen driver for:
	467	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	468	- PanJit TouchSet USB
	469	- 3M MicroTouch USB (EX II series)
	470	- ITM
	471	- some other eTurboTouch
	472	- Gunze AHL61
	473	- DMC TSC-10/25
df561fcd	474	- IRTOUCHSYSTEMS/UNITOP
a14a8401	475	- IdealTEK URTC1000
14e40206	476	- GoTop Super_Q2/GogoPen/PenPower tablets
f7370699	477	- JASTEC USB Touch Controller/DigiTech DTR-02U
2330ed18	478	- Zytronic controllers
d05e84e6 DT	479
	480	Have a look at <http://linux.chapter7.ch/touchkit/> for
	481	a usage description and the required user-space stuff.
	482
	483	To compile this driver as a module, choose M here: the
	484	module will be called usbtouchscreen.
	485
d201fd5d SH	486	config TOUCHSCREEN_MC13783
	487	tristate "Freescale MC13783 touchscreen input driver"
	488	depends on MFD_MC13783
	489	help
	490	Say Y here if you have an Freescale MC13783 PMIC on your
	491	board and want to use its touchscreen
	492
	493	If unsure, say N.
	494
	495	To compile this driver as a module, choose M here: the
	496	module will be called mc13783_ts.
	497
d05e84e6 DT	498	config TOUCHSCREEN_USB_EGALAX
	499	default y
	500	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	501	depends on TOUCHSCREEN_USB_COMPOSITE
	502
	503	config TOUCHSCREEN_USB_PANJIT
	504	default y
	505	bool "PanJit device support" if EMBEDDED
	506	depends on TOUCHSCREEN_USB_COMPOSITE
	507
	508	config TOUCHSCREEN_USB_3M
	509	default y
	510	bool "3M/Microtouch EX II series device support" if EMBEDDED
	511	depends on TOUCHSCREEN_USB_COMPOSITE
	512
	513	config TOUCHSCREEN_USB_ITM
	514	default y
	515	bool "ITM device support" if EMBEDDED
	516	depends on TOUCHSCREEN_USB_COMPOSITE
	517
	518	config TOUCHSCREEN_USB_ETURBO
	519	default y
	520	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	521	depends on TOUCHSCREEN_USB_COMPOSITE
	522
	523	config TOUCHSCREEN_USB_GUNZE
	524	default y
	525	bool "Gunze AHL61 device support" if EMBEDDED
	526	depends on TOUCHSCREEN_USB_COMPOSITE
	527
	528	config TOUCHSCREEN_USB_DMC_TSC10
	529	default y
	530	bool "DMC TSC-10/25 device support" if EMBEDDED
	531	depends on TOUCHSCREEN_USB_COMPOSITE
	532
df561fcd OZ	533	config TOUCHSCREEN_USB_IRTOUCH
	534	default y
	535	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	536	depends on TOUCHSCREEN_USB_COMPOSITE
	537
a14a8401 OZ	538	config TOUCHSCREEN_USB_IDEALTEK
	539	default y
	540	bool "IdealTEK URTC1000 device support" if EMBEDDED
	541	depends on TOUCHSCREEN_USB_COMPOSITE
	542
9d5657db IF	543	config TOUCHSCREEN_USB_GENERAL_TOUCH
	544	default y
	545	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	546	depends on TOUCHSCREEN_USB_COMPOSITE
	547
14e40206 JJ	548	config TOUCHSCREEN_USB_GOTOP
	549	default y
	550	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	551	depends on TOUCHSCREEN_USB_COMPOSITE
	552
f7370699 JP	553	config TOUCHSCREEN_USB_JASTEC
	554	default y
	555	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	556	depends on TOUCHSCREEN_USB_COMPOSITE
	557
9e3b2583 FE	558	config TOUCHSCREEN_USB_E2I
	559	default y
	560	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
	561	depends on TOUCHSCREEN_USB_COMPOSITE
	562
2330ed18 DS	563	config TOUCHSCREEN_USB_ZYTRONIC
	564	default y
	565	bool "Zytronic controller" if EMBEDDED
	566	depends on TOUCHSCREEN_USB_COMPOSITE
	567
38771bb4	568	config TOUCHSCREEN_USB_ETT_TC45USB
dbe1420b	569	default y
38771bb4	570	bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
dbe1420b PŠ	571	depends on TOUCHSCREEN_USB_COMPOSITE
dbe1420b PŠ	572
5197424c OZ	573	config TOUCHSCREEN_USB_NEXIO
	574	default y
	575	bool "NEXIO/iNexio device support" if EMBEDDED
	576	depends on TOUCHSCREEN_USB_COMPOSITE
	577
73422392 CN	578	config TOUCHSCREEN_TOUCHIT213
	579	tristate "Sahara TouchIT-213 touchscreen"
	580	select SERIO
	581	help
	582	Say Y here if you have a Sahara TouchIT-213 Tablet PC.
	583
	584	If unsure, say N.
	585
	586	To compile this driver as a module, choose M here: the
	587	module will be called touchit213.
	588
50b6f1f4 KL	589	config TOUCHSCREEN_TSC2007
	590	tristate "TSC2007 based touchscreens"
	591	depends on I2C
	592	help
	593	Say Y here if you have a TSC2007 based touchscreen.
	594
	595	If unsure, say N.
	596
	597	To compile this driver as a module, choose M here: the
	598	module will be called tsc2007.
	599
7e3f7375 WZ	600	config TOUCHSCREEN_W90X900
7e3f7375 WZ	601	tristate "W90P910 touchscreen driver"
b7788c5f	602	depends on HAVE_CLK
7e3f7375 WZ	603	help
	604	Say Y here if you have a W90P910 based touchscreen.
	605
	606	To compile this driver as a module, choose M here: the
	607	module will be called w90p910_ts.
	608
0387e107 DR	609	config TOUCHSCREEN_PCAP
	610	tristate "Motorola PCAP touchscreen"
	611	depends on EZX_PCAP
	612	help
	613	Say Y here if you have a Motorola EZX telephone and
	614	want to enable support for the built-in touchscreen.
	615
	616	To compile this driver as a module, choose M here: the
	617	module will be called pcap_ts.
75259966 TF	618
	619	config TOUCHSCREEN_TPS6507X
	620	tristate "TPS6507x based touchscreens"
	621	depends on I2C
	622	help
	623	Say Y here if you have a TPS6507x based touchscreen
	624	controller.
	625
	626	If unsure, say N.
	627
	628	To compile this driver as a module, choose M here: the
	629	module will be called tps6507x_ts.
	630
f94add3b LF	631	config TOUCHSCREEN_STMPE
	632	tristate "STMicroelectronics STMPE touchscreens"
	633	depends on MFD_STMPE
	634	help
	635	Say Y here if you want support for STMicroelectronics
	636	STMPE touchscreen controllers.
	637
	638	To compile this driver as a module, choose M here: the
	639	module will be called stmpe-ts.
	640
1da177e4	641	endif