[linux-2.6-block.git] / drivers / input / touchscreen / Kconfig

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	  setup code includes that in its table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846/tsc2046, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_AD7877
	tristate "AD7877 based touchscreens"
	depends on SPI_MASTER
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7877 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7877.

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
	depends on PXA_SHARPSL
	select CORGI_SSP_DEPRECATED
	default y
	help
	  Say Y here to enable the driver for the touchscreen on the
	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called corgi_ts.

	  NOTE: this driver is deprecated, try enable SPI and generic
	  ADS7846-based touchscreen driver.

config TOUCHSCREEN_DA9034
	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	depends on PMIC_DA903X
	default y
	help
	  Say Y here to enable the support for the touchscreen found
	  on Dialog Semiconductor DA9034 PMIC.

config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	  Say Y here if you have the Fujitsu touchscreen (such as one
	  installed in Lifebook P series laptop) connected to your
	  system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called fujitsu-ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_WACOM_W8001
	tristate "Wacom W8001 penabled serial touchscreen"
	select SERIO
	help
	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
	  connected to your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wacom_w8001.


config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an iNexio serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called inexio.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want
	  to support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_ts.

config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	  Clio / Shangrila and want to support the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called htcpen.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	  Say Y here to enable MIGO-R touchscreen support.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called migor_ts.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL
	help
	  Say Y here if you have a 4-wire touchscreen connected to the
          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called atmel_tsadcc.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	  Say Y here if you have a Wolfson Microelectronics WM97xx
	  touchscreen connected to your system. Note that this option
	  only enables core driver, you will also need to select
	  support for appropriate chip below.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wm97xx-ts.

config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9705 touchscreen controller.

config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9712 touchscreen controller.

config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9713 touchscreen controller.

config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Mainstone systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mainstone-wm97xx.

config TOUCHSCREEN_WM97XX_ZYLONITE
	tristate "Zylonite accelerated touch"
	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	select TOUCHSCREEN_WM9713
	help
	  Say Y here for support for streaming mode with the touchscreen
	  on Zylonite systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called zylonite-wm97xx.

config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	  USB Touchscreen driver for:
	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	  - PanJit TouchSet USB
	  - 3M MicroTouch USB (EX II series)
	  - ITM
	  - some other eTurboTouch
	  - Gunze AHL61
	  - DMC TSC-10/25
	  - IRTOUCHSYSTEMS/UNITOP
	  - IdealTEK URTC1000
	  - GoTop Super_Q2/GogoPen/PenPower tablets

	  Have a look at <http://linux.chapter7.ch/touchkit/> for
	  a usage description and the required user-space stuff.

	  To compile this driver as a module, choose M here: the
	  module will be called usbtouchscreen.

config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchit213.

config TOUCHSCREEN_TSC2007
	tristate "TSC2007 based touchscreens"
	depends on I2C
	help
	  Say Y here if you have a TSC2007 based touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called tsc2007.

endif
Commit	Line	Data
1da177e4	1	#
d05e84e6	2	# Touchscreen driver configuration
1da177e4 LT	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
ffa458c1	14	config TOUCHSCREEN_ADS7846
bff0de5f	15	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
ffa458c1	16	depends on SPI_MASTER
2c8dc071	17	depends on HWMON = n \|\| HWMON
ffa458c1 DB	18	help
ffa458c1 DB	19	Say Y here if you have a touchscreen interface using the
bff0de5f DB	20	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
bff0de5f DB	21	setup code includes that in its table of SPI devices.
ffa458c1	22
2c8dc071 DB	23	If HWMON is selected, and the driver is told the reference voltage
2c8dc071 DB	24	on your board, you will also get hwmon interfaces for the voltage
bff0de5f	25	(and on ads7846/tsc2046, temperature) sensors of this chip.
2c8dc071	26
ffa458c1 DB	27	If unsure, say N (but it's safe to say "Y").
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called ads7846.
	31
331b78ed MH	32	config TOUCHSCREEN_AD7877
	33	tristate "AD7877 based touchscreens"
	34	depends on SPI_MASTER
	35	help
	36	Say Y here if you have a touchscreen interface using the
	37	AD7877 controller, and your board-specific initialization
	38	code includes that in its table of SPI devices.
	39
	40	If unsure, say N (but it's safe to say "Y").
	41
	42	To compile this driver as a module, choose M here: the
	43	module will be called ad7877.
	44
1da177e4 LT	45	config TOUCHSCREEN_BITSY
	46	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	47	depends on SA1100_BITSY
	48	select SERIO
	49	help
	50	Say Y here if you have the h3600 (Bitsy) touchscreen.
	51
	52	If unsure, say N.
	53
	54	To compile this driver as a module, choose M here: the
	55	module will be called h3600_ts_input.
	56
	57	config TOUCHSCREEN_CORGI
45e2a9b4	58	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
1da177e4	59	depends on PXA_SHARPSL
45e2a9b4	60	select CORGI_SSP_DEPRECATED
d05e84e6	61	default y
1da177e4	62	help
d05e84e6	63	Say Y here to enable the driver for the touchscreen on the
513b6e1a	64	Sharp SL-C7xx and SL-Cxx00 series of PDAs.
1da177e4 LT	65
	66	If unsure, say N.
	67
	68	To compile this driver as a module, choose M here: the
513b6e1a	69	module will be called corgi_ts.
1da177e4	70
45e2a9b4 EM	71	NOTE: this driver is deprecated, try enable SPI and generic
	72	ADS7846-based touchscreen driver.
	73
9bcc00b9 EM	74	config TOUCHSCREEN_DA9034
	75	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	76	depends on PMIC_DA903X
	77	default y
	78	help
	79	Say Y here to enable the support for the touchscreen found
	80	on Dialog Semiconductor DA9034 PMIC.
	81
85f202d5 DT	82	config TOUCHSCREEN_FUJITSU
	83	tristate "Fujitsu serial touchscreen"
	84	select SERIO
	85	help
	86	Say Y here if you have the Fujitsu touchscreen (such as one
	87	installed in Lifebook P series laptop) connected to your
	88	system.
	89
	90	If unsure, say N.
	91
	92	To compile this driver as a module, choose M here: the
	93	module will be called fujitsu-ts.
	94
1da177e4 LT	95	config TOUCHSCREEN_GUNZE
	96	tristate "Gunze AHL-51S touchscreen"
	97	select SERIO
	98	help
	99	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	100	your system.
	101
	102	If unsure, say N.
	103
	104	To compile this driver as a module, choose M here: the
	105	module will be called gunze.
	106
	107	config TOUCHSCREEN_ELO
	108	tristate "Elo serial touchscreens"
	109	select SERIO
	110	help
	111	Say Y here if you have an Elo serial touchscreen connected to
	112	your system.
	113
	114	If unsure, say N.
	115
	116	To compile this driver as a module, choose M here: the
153ab429	117	module will be called elo.
1da177e4	118
3eb1aa43 JK	119	config TOUCHSCREEN_WACOM_W8001
	120	tristate "Wacom W8001 penabled serial touchscreen"
	121	select SERIO
	122	help
	123	Say Y here if you have an Wacom W8001 penabled serial touchscreen
	124	connected to your system.
	125
	126	If unsure, say N.
	127
	128	To compile this driver as a module, choose M here: the
	129	module will be called wacom_w8001.
	130
	131
1da177e4 LT	132	config TOUCHSCREEN_MTOUCH
	133	tristate "MicroTouch serial touchscreens"
	134	select SERIO
	135	help
	136	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	137	your system.
	138
	139	If unsure, say N.
	140
	141	To compile this driver as a module, choose M here: the
	142	module will be called mtouch.
	143
3cadd2d9 RL	144	config TOUCHSCREEN_INEXIO
	145	tristate "iNexio serial touchscreens"
	146	select SERIO
	147	help
	148	Say Y here if you have an iNexio serial touchscreen connected to
	149	your system.
	150
	151	If unsure, say N.
	152
	153	To compile this driver as a module, choose M here: the
	154	module will be called inexio.
	155
1da177e4 LT	156	config TOUCHSCREEN_MK712
	157	tristate "ICS MicroClock MK712 touchscreen"
	158	help
	159	Say Y here if you have the ICS MicroClock MK712 touchscreen
	160	controller chip in your system.
	161
	162	If unsure, say N.
	163
	164	To compile this driver as a module, choose M here: the
	165	module will be called mk712.
	166
	167	config TOUCHSCREEN_HP600
4ff891eb	168	tristate "HP Jornada 6xx touchscreen"
0025835c	169	depends on SH_HP6XX && SH_ADC
1da177e4	170	help
4ff891eb	171	Say Y here if you have a HP Jornada 620/660/680/690 and want to
1da177e4 LT	172	support the built-in touchscreen.
1da177e4 LT	173
1da177e4 LT	174	To compile this driver as a module, choose M here: the
	175	module will be called hp680_ts_input.
	176
5637f02a	177	config TOUCHSCREEN_HP7XX
4ff891eb	178	tristate "HP Jornada 7xx touchscreen"
5637f02a KE	179	depends on SA1100_JORNADA720_SSP
	180	help
	181	Say Y here if you have a HP Jornada 710/720/728 and want
	182	to support the built-in touchscreen.
	183
	184	To compile this driver as a module, choose M here: the
	185	module will be called jornada720_ts.
	186
5a18c343 POF	187	config TOUCHSCREEN_HTCPEN
	188	tristate "HTC Shift X9500 touchscreen"
	189	depends on ISA
	190	help
	191	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	192	Clio / Shangrila and want to support the built-in touchscreen.
	193
	194	If unsure, say N.
	195
	196	To compile this driver as a module, choose M here: the
	197	module will be called htcpen.
	198
ee479999 RK	199	config TOUCHSCREEN_PENMOUNT
	200	tristate "Penmount serial touchscreen"
	201	select SERIO
	202	help
	203	Say Y here if you have a Penmount serial touchscreen connected to
	204	your system.
	205
	206	If unsure, say N.
	207
	208	To compile this driver as a module, choose M here: the
	209	module will be called penmount.
	210
885c316d MD	211	config TOUCHSCREEN_MIGOR
	212	tristate "Renesas MIGO-R touchscreen"
	213	depends on SH_MIGOR && I2C
	214	help
	215	Say Y here to enable MIGO-R touchscreen support.
	216
	217	If unsure, say N.
	218
	219	To compile this driver as a module, choose M here: the
	220	module will be called migor_ts.
	221
4003dff4 RK	222	config TOUCHSCREEN_TOUCHRIGHT
	223	tristate "Touchright serial touchscreen"
	224	select SERIO
	225	help
	226	Say Y here if you have a Touchright serial touchscreen connected to
	227	your system.
	228
	229	If unsure, say N.
	230
	231	To compile this driver as a module, choose M here: the
	232	module will be called touchright.
	233
11ea3173 RK	234	config TOUCHSCREEN_TOUCHWIN
	235	tristate "Touchwin serial touchscreen"
	236	select SERIO
	237	help
	238	Say Y here if you have a Touchwin serial touchscreen connected to
	239	your system.
	240
	241	If unsure, say N.
	242
	243	To compile this driver as a module, choose M here: the
	244	module will be called touchwin.
	245
72d18a7b DL	246	config TOUCHSCREEN_ATMEL_TSADCC
	247	tristate "Atmel Touchscreen Interface"
	248	depends on ARCH_AT91SAM9RL
	249	help
	250	Say Y here if you have a 4-wire touchscreen connected to the
	251	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
	252
	253	If unsure, say N.
	254
	255	To compile this driver as a module, choose M here: the
	256	module will be called atmel_tsadcc.
	257
f40219bf NP	258	config TOUCHSCREEN_UCB1400
f40219bf NP	259	tristate "Philips UCB1400 touchscreen"
64c12e9b	260	depends on AC97_BUS
d9105c2b	261	depends on UCB1400_CORE
f40219bf NP	262	help
	263	This enables support for the Philips UCB1400 touchscreen interface.
	264	The UCB1400 is an AC97 audio codec. The touchscreen interface
	265	will be initialized only after the ALSA subsystem has been
	266	brought up and the UCB1400 detected. You therefore have to
	267	configure ALSA support as well (either built-in or modular,
	268	independently of whether this driver is itself built-in or
	269	modular) for this driver to work.
	270
	271	To compile this driver as a module, choose M here: the
	272	module will be called ucb1400_ts.
	273
febf1dff MB	274	config TOUCHSCREEN_WM97XX
	275	tristate "Support for WM97xx AC97 touchscreen controllers"
	276	depends on AC97_BUS
	277	help
	278	Say Y here if you have a Wolfson Microelectronics WM97xx
	279	touchscreen connected to your system. Note that this option
	280	only enables core driver, you will also need to select
	281	support for appropriate chip below.
	282
	283	If unsure, say N.
	284
	285	To compile this driver as a module, choose M here: the
	286	module will be called wm97xx-ts.
	287
9448cefc MB	288	config TOUCHSCREEN_WM9705
	289	bool "WM9705 Touchscreen interface support"
	290	depends on TOUCHSCREEN_WM97XX
558a171d	291	default y
9448cefc	292	help
558a171d MB	293	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	294	WM9705 touchscreen controller.
9448cefc	295
de22b9ef MB	296	config TOUCHSCREEN_WM9712
	297	bool "WM9712 Touchscreen interface support"
	298	depends on TOUCHSCREEN_WM97XX
558a171d	299	default y
de22b9ef	300	help
558a171d MB	301	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	302	WM9712 touchscreen controller.
de22b9ef	303
dca98e91 MB	304	config TOUCHSCREEN_WM9713
	305	bool "WM9713 Touchscreen interface support"
	306	depends on TOUCHSCREEN_WM97XX
558a171d	307	default y
dca98e91	308	help
558a171d MB	309	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	310	WM9713 touchscreen controller.
dca98e91	311
4db8a5f2 MB	312	config TOUCHSCREEN_WM97XX_MAINSTONE
	313	tristate "WM97xx Mainstone accelerated touch"
	314	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	315	help
	316	Say Y here for support for streaming mode with WM97xx touchscreens
	317	on Mainstone systems.
	318
	319	If unsure, say N.
	320
	321	To compile this driver as a module, choose M here: the
	322	module will be called mainstone-wm97xx.
	323
22e39d34 MB	324	config TOUCHSCREEN_WM97XX_ZYLONITE
	325	tristate "Zylonite accelerated touch"
	326	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	327	select TOUCHSCREEN_WM9713
	328	help
	329	Say Y here for support for streaming mode with the touchscreen
	330	on Zylonite systems.
	331
	332	If unsure, say N.
	333
	334	To compile this driver as a module, choose M here: the
	335	module will be called zylonite-wm97xx.
	336
d05e84e6 DT	337	config TOUCHSCREEN_USB_COMPOSITE
d05e84e6 DT	338	tristate "USB Touchscreen Driver"
7a86edef	339	depends on USB_ARCH_HAS_HCD
d05e84e6 DT	340	select USB
	341	help
	342	USB Touchscreen driver for:
	343	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	344	- PanJit TouchSet USB
	345	- 3M MicroTouch USB (EX II series)
	346	- ITM
	347	- some other eTurboTouch
	348	- Gunze AHL61
	349	- DMC TSC-10/25
df561fcd	350	- IRTOUCHSYSTEMS/UNITOP
a14a8401	351	- IdealTEK URTC1000
14e40206	352	- GoTop Super_Q2/GogoPen/PenPower tablets
d05e84e6 DT	353
	354	Have a look at <http://linux.chapter7.ch/touchkit/> for
	355	a usage description and the required user-space stuff.
	356
	357	To compile this driver as a module, choose M here: the
	358	module will be called usbtouchscreen.
	359
	360	config TOUCHSCREEN_USB_EGALAX
	361	default y
	362	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	363	depends on TOUCHSCREEN_USB_COMPOSITE
	364
	365	config TOUCHSCREEN_USB_PANJIT
	366	default y
	367	bool "PanJit device support" if EMBEDDED
	368	depends on TOUCHSCREEN_USB_COMPOSITE
	369
	370	config TOUCHSCREEN_USB_3M
	371	default y
	372	bool "3M/Microtouch EX II series device support" if EMBEDDED
	373	depends on TOUCHSCREEN_USB_COMPOSITE
	374
	375	config TOUCHSCREEN_USB_ITM
	376	default y
	377	bool "ITM device support" if EMBEDDED
	378	depends on TOUCHSCREEN_USB_COMPOSITE
	379
	380	config TOUCHSCREEN_USB_ETURBO
	381	default y
	382	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	383	depends on TOUCHSCREEN_USB_COMPOSITE
	384
	385	config TOUCHSCREEN_USB_GUNZE
	386	default y
	387	bool "Gunze AHL61 device support" if EMBEDDED
	388	depends on TOUCHSCREEN_USB_COMPOSITE
	389
	390	config TOUCHSCREEN_USB_DMC_TSC10
	391	default y
	392	bool "DMC TSC-10/25 device support" if EMBEDDED
	393	depends on TOUCHSCREEN_USB_COMPOSITE
	394
df561fcd OZ	395	config TOUCHSCREEN_USB_IRTOUCH
	396	default y
	397	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	398	depends on TOUCHSCREEN_USB_COMPOSITE
	399
a14a8401 OZ	400	config TOUCHSCREEN_USB_IDEALTEK
	401	default y
	402	bool "IdealTEK URTC1000 device support" if EMBEDDED
	403	depends on TOUCHSCREEN_USB_COMPOSITE
	404
9d5657db IF	405	config TOUCHSCREEN_USB_GENERAL_TOUCH
	406	default y
	407	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	408	depends on TOUCHSCREEN_USB_COMPOSITE
	409
14e40206 JJ	410	config TOUCHSCREEN_USB_GOTOP
	411	default y
	412	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	413	depends on TOUCHSCREEN_USB_COMPOSITE
	414
73422392 CN	415	config TOUCHSCREEN_TOUCHIT213
	416	tristate "Sahara TouchIT-213 touchscreen"
	417	select SERIO
	418	help
	419	Say Y here if you have a Sahara TouchIT-213 Tablet PC.
	420
	421	If unsure, say N.
	422
	423	To compile this driver as a module, choose M here: the
	424	module will be called touchit213.
	425
50b6f1f4 KL	426	config TOUCHSCREEN_TSC2007
	427	tristate "TSC2007 based touchscreens"
	428	depends on I2C
	429	help
	430	Say Y here if you have a TSC2007 based touchscreen.
	431
	432	If unsure, say N.
	433
	434	To compile this driver as a module, choose M here: the
	435	module will be called tsc2007.
	436
1da177e4	437	endif