Commit | Line | Data |
---|---|---|
105ca239 YY |
1 | /* |
2 | * PXA930 track ball mouse driver | |
3 | * | |
4 | * Copyright (C) 2007 Marvell International Ltd. | |
5 | * 2008-02-28: Yong Yao <yaoyong@marvell.com> | |
6 | * initial version | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | */ | |
12 | ||
13 | #include <linux/init.h> | |
14 | #include <linux/input.h> | |
15 | #include <linux/version.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/module.h> | |
18 | #include <linux/platform_device.h> | |
19 | #include <linux/delay.h> | |
20 | #include <linux/io.h> | |
5a0e3ad6 | 21 | #include <linux/slab.h> |
105ca239 YY |
22 | |
23 | #include <mach/hardware.h> | |
24 | #include <mach/pxa930_trkball.h> | |
25 | ||
26 | /* Trackball Controller Register Definitions */ | |
27 | #define TBCR (0x000C) | |
28 | #define TBCNTR (0x0010) | |
29 | #define TBSBC (0x0014) | |
30 | ||
31 | #define TBCR_TBRST (1 << 1) | |
32 | #define TBCR_TBSB (1 << 10) | |
33 | ||
34 | #define TBCR_Y_FLT(n) (((n) & 0xf) << 6) | |
35 | #define TBCR_X_FLT(n) (((n) & 0xf) << 2) | |
36 | ||
37 | #define TBCNTR_YM(n) (((n) >> 24) & 0xff) | |
38 | #define TBCNTR_YP(n) (((n) >> 16) & 0xff) | |
39 | #define TBCNTR_XM(n) (((n) >> 8) & 0xff) | |
40 | #define TBCNTR_XP(n) ((n) & 0xff) | |
41 | ||
42 | #define TBSBC_TBSBC (0x1) | |
43 | ||
44 | struct pxa930_trkball { | |
45 | struct pxa930_trkball_platform_data *pdata; | |
46 | ||
47 | /* Memory Mapped Register */ | |
48 | struct resource *mem; | |
49 | void __iomem *mmio_base; | |
50 | ||
51 | struct input_dev *input; | |
52 | }; | |
53 | ||
54 | static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id) | |
55 | { | |
56 | struct pxa930_trkball *trkball = dev_id; | |
57 | struct input_dev *input = trkball->input; | |
58 | int tbcntr, x, y; | |
59 | ||
60 | /* According to the spec software must read TBCNTR twice: | |
61 | * if the read value is the same, the reading is valid | |
62 | */ | |
63 | tbcntr = __raw_readl(trkball->mmio_base + TBCNTR); | |
64 | ||
65 | if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) { | |
66 | x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2; | |
67 | y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2; | |
68 | ||
69 | input_report_rel(input, REL_X, x); | |
70 | input_report_rel(input, REL_Y, y); | |
71 | input_sync(input); | |
72 | } | |
73 | ||
74 | __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | |
75 | __raw_writel(0, trkball->mmio_base + TBSBC); | |
76 | ||
77 | return IRQ_HANDLED; | |
78 | } | |
79 | ||
80 | /* For TBCR, we need to wait for a while to make sure it has been modified. */ | |
81 | static int write_tbcr(struct pxa930_trkball *trkball, int v) | |
82 | { | |
83 | int i = 100; | |
84 | ||
85 | __raw_writel(v, trkball->mmio_base + TBCR); | |
86 | ||
bc34496d | 87 | while (--i) { |
105ca239 YY |
88 | if (__raw_readl(trkball->mmio_base + TBCR) == v) |
89 | break; | |
90 | msleep(1); | |
91 | } | |
92 | ||
93 | if (i == 0) { | |
94 | pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v); | |
95 | return -ETIMEDOUT; | |
96 | } | |
97 | ||
98 | return 0; | |
99 | } | |
100 | ||
101 | static void pxa930_trkball_config(struct pxa930_trkball *trkball) | |
102 | { | |
103 | uint32_t tbcr; | |
104 | ||
105 | /* According to spec, need to write the filters of x,y to 0xf first! */ | |
106 | tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
107 | write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf)); | |
108 | write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) | | |
109 | TBCR_Y_FLT(trkball->pdata->y_filter)); | |
110 | ||
111 | /* According to spec, set TBCR_TBRST first, before clearing it! */ | |
112 | tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
113 | write_tbcr(trkball, tbcr | TBCR_TBRST); | |
114 | write_tbcr(trkball, tbcr & ~TBCR_TBRST); | |
115 | ||
116 | __raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC); | |
117 | __raw_writel(0, trkball->mmio_base + TBSBC); | |
118 | ||
119 | pr_debug("%s: final TBCR=%x!\n", __func__, | |
120 | __raw_readl(trkball->mmio_base + TBCR)); | |
121 | } | |
122 | ||
123 | static int pxa930_trkball_open(struct input_dev *dev) | |
124 | { | |
125 | struct pxa930_trkball *trkball = input_get_drvdata(dev); | |
126 | ||
127 | pxa930_trkball_config(trkball); | |
128 | ||
129 | return 0; | |
130 | } | |
131 | ||
132 | static void pxa930_trkball_disable(struct pxa930_trkball *trkball) | |
133 | { | |
134 | uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR); | |
135 | ||
136 | /* Held in reset, gate the 32-KHz input clock off */ | |
137 | write_tbcr(trkball, tbcr | TBCR_TBRST); | |
138 | } | |
139 | ||
140 | static void pxa930_trkball_close(struct input_dev *dev) | |
141 | { | |
142 | struct pxa930_trkball *trkball = input_get_drvdata(dev); | |
143 | ||
144 | pxa930_trkball_disable(trkball); | |
145 | } | |
146 | ||
147 | static int __devinit pxa930_trkball_probe(struct platform_device *pdev) | |
148 | { | |
149 | struct pxa930_trkball *trkball; | |
150 | struct input_dev *input; | |
151 | struct resource *res; | |
152 | int irq, error; | |
153 | ||
154 | irq = platform_get_irq(pdev, 0); | |
155 | if (irq < 0) { | |
156 | dev_err(&pdev->dev, "failed to get trkball irq\n"); | |
157 | return -ENXIO; | |
158 | } | |
159 | ||
160 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
161 | if (!res) { | |
162 | dev_err(&pdev->dev, "failed to get register memory\n"); | |
163 | return -ENXIO; | |
164 | } | |
165 | ||
166 | trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL); | |
167 | if (!trkball) | |
168 | return -ENOMEM; | |
169 | ||
170 | trkball->pdata = pdev->dev.platform_data; | |
171 | if (!trkball->pdata) { | |
172 | dev_err(&pdev->dev, "no platform data defined\n"); | |
173 | error = -EINVAL; | |
174 | goto failed; | |
175 | } | |
176 | ||
177 | trkball->mmio_base = ioremap_nocache(res->start, resource_size(res)); | |
178 | if (!trkball->mmio_base) { | |
179 | dev_err(&pdev->dev, "failed to ioremap registers\n"); | |
180 | error = -ENXIO; | |
181 | goto failed; | |
182 | } | |
183 | ||
184 | /* held the module in reset, will be enabled in open() */ | |
185 | pxa930_trkball_disable(trkball); | |
186 | ||
187 | error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED, | |
188 | pdev->name, trkball); | |
189 | if (error) { | |
d8f2f180 | 190 | dev_err(&pdev->dev, "failed to request irq: %d\n", error); |
105ca239 YY |
191 | goto failed_free_io; |
192 | } | |
193 | ||
194 | platform_set_drvdata(pdev, trkball); | |
195 | ||
196 | input = input_allocate_device(); | |
197 | if (!input) { | |
198 | dev_err(&pdev->dev, "failed to allocate input device\n"); | |
199 | error = -ENOMEM; | |
200 | goto failed_free_irq; | |
201 | } | |
202 | ||
203 | input->name = pdev->name; | |
204 | input->id.bustype = BUS_HOST; | |
205 | input->open = pxa930_trkball_open; | |
206 | input->close = pxa930_trkball_close; | |
207 | input->dev.parent = &pdev->dev; | |
208 | input_set_drvdata(input, trkball); | |
209 | ||
210 | trkball->input = input; | |
211 | ||
212 | input_set_capability(input, EV_REL, REL_X); | |
213 | input_set_capability(input, EV_REL, REL_Y); | |
214 | ||
215 | error = input_register_device(input); | |
216 | if (error) { | |
217 | dev_err(&pdev->dev, "unable to register input device\n"); | |
218 | goto failed_free_input; | |
219 | } | |
220 | ||
221 | return 0; | |
222 | ||
223 | failed_free_input: | |
224 | input_free_device(input); | |
225 | failed_free_irq: | |
226 | free_irq(irq, trkball); | |
227 | failed_free_io: | |
228 | iounmap(trkball->mmio_base); | |
229 | failed: | |
230 | kfree(trkball); | |
d8f2f180 | 231 | return error; |
105ca239 YY |
232 | } |
233 | ||
234 | static int __devexit pxa930_trkball_remove(struct platform_device *pdev) | |
235 | { | |
236 | struct pxa930_trkball *trkball = platform_get_drvdata(pdev); | |
237 | int irq = platform_get_irq(pdev, 0); | |
238 | ||
239 | input_unregister_device(trkball->input); | |
240 | free_irq(irq, trkball); | |
241 | iounmap(trkball->mmio_base); | |
242 | kfree(trkball); | |
243 | ||
244 | return 0; | |
245 | } | |
246 | ||
247 | static struct platform_driver pxa930_trkball_driver = { | |
248 | .driver = { | |
249 | .name = "pxa930-trkball", | |
250 | }, | |
251 | .probe = pxa930_trkball_probe, | |
252 | .remove = __devexit_p(pxa930_trkball_remove), | |
253 | }; | |
254 | ||
255 | static int __init pxa930_trkball_init(void) | |
256 | { | |
257 | return platform_driver_register(&pxa930_trkball_driver); | |
258 | } | |
259 | ||
260 | static void __exit pxa930_trkball_exit(void) | |
261 | { | |
262 | platform_driver_unregister(&pxa930_trkball_driver); | |
263 | } | |
264 | ||
265 | module_init(pxa930_trkball_init); | |
266 | module_exit(pxa930_trkball_exit); | |
267 | ||
268 | MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); | |
269 | MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); | |
270 | MODULE_LICENSE("GPL"); |