[linux-block.git] / drivers / iio / light / Kconfig

#
# Light sensors
#
# When adding new entries keep the list in alphabetical order

menu "Light sensors"

config ADJD_S311
	tristate "ADJD-S311-CR999 digital color sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on I2C
	help
	 If you say yes here you get support for the Avago ADJD-S311-CR999
	 digital color light sensor.

	 This driver can also be built as a module.  If so, the module
	 will be called adjd_s311.

config APDS9300
	tristate "APDS9300 ambient light sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Avago APDS9300
	 ambient light sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called apds9300.

config CM36651
	depends on I2C
	tristate "CM36651 driver"
	help
	 Say Y here if you use cm36651.
	 This option enables proximity & RGB sensor using
	 Capella cm36651 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm36651.

config GP2AP020A00F
	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select IRQ_WORK
	help
	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	  hooked to an I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called gp2ap020a00f.

config HID_SENSOR_ALS
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID ALS"
	help
	  Say yes here to build support for the HID SENSOR
	  Ambient light sensor.

config SENSORS_LM3533
	tristate "LM3533 ambient light sensor"
	depends on MFD_LM3533
	help
	  If you say yes here you get support for the ambient light sensor
	  interface on National Semiconductor / TI LM3533 Lighting Power
	  chips.

	  The sensor interface can be used to control the LEDs and backlights
	  of the chip through defining five light zones and three sets of
	  corresponding output-current values.

	  The driver provides raw and mean adc readings along with the current
	  light zone through sysfs. A threshold event can be generated on zone
	  changes. The ALS-control output values can be set per zone for the
	  three current output channels.

config TCS3472
	tristate "TAOS TCS3472 color light-to-digital converter"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the TAOS TCS3472
	 family of color light-to-digital converters with IR filter.

	 This driver can also be built as a module.  If so, the module
	 will be called tcs3472.

config SENSORS_TSL2563
	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	depends on I2C
	help
	 If you say yes here you get support for the Taos TSL2560,
	 TSL2561, TSL2562 and TSL2563 ambient light sensors.

	 This driver can also be built as a module.  If so, the module
	 will be called tsl2563.

config TSL4531
	tristate "TAOS TSL4531 ambient light sensors"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the TAOS TSL4531 family
	 of ambient light sensors with direct lux output.

	 To compile this driver as a module, choose M here: the
	 module will be called tsl4531.

config VCNL4000
	tristate "VCNL4000 combined ALS and proximity sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Vishay VCNL4000
	 combined ambient light and proximity sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called vcnl4000.

endmenu
Commit	Line	Data
9c8ea1b2 JH	1	#
	2	# Light sensors
	3	#
3edc84e6 LPC	4	# When adding new entries keep the list in alphabetical order
3edc84e6 LPC	5
9c8ea1b2 JH	6	menu "Light sensors"
9c8ea1b2 JH	7
bbdb822c PM	8	config ADJD_S311
	9	tristate "ADJD-S311-CR999 digital color sensor"
	10	select IIO_BUFFER
	11	select IIO_TRIGGERED_BUFFER
	12	depends on I2C
	13	help
	14	If you say yes here you get support for the Avago ADJD-S311-CR999
	15	digital color light sensor.
	16
	17	This driver can also be built as a module. If so, the module
	18	will be called adjd_s311.
	19
03eff7b6 OK	20	config APDS9300
	21	tristate "APDS9300 ambient light sensor"
	22	depends on I2C
	23	help
	24	Say Y here if you want to build a driver for the Avago APDS9300
	25	ambient light sensor.
	26
	27	To compile this driver as a module, choose M here: the
	28	module will be called apds9300.
	29
e590d451 BS	30	config CM36651
	31	depends on I2C
	32	tristate "CM36651 driver"
	33	help
	34	Say Y here if you use cm36651.
	35	This option enables proximity & RGB sensor using
	36	Capella cm36651 device driver.
	37
	38	To compile this driver as a module, choose M here:
	39	the module will be called cm36651.
	40
bf29fbea JA	41	config GP2AP020A00F
	42	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	43	depends on I2C
	44	select IIO_BUFFER
	45	select IIO_TRIGGERED_BUFFER
419a4aae	46	select IRQ_WORK
bf29fbea JA	47	help
	48	Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	49	hooked to an I2C bus.
	50
	51	To compile this driver as a module, choose M here: the
	52	module will be called gp2ap020a00f.
	53
3edc84e6 LPC	54	config HID_SENSOR_ALS
	55	depends on HID_SENSOR_HUB
	56	select IIO_BUFFER
	57	select IIO_TRIGGERED_BUFFER
	58	select HID_SENSOR_IIO_COMMON
	59	select HID_SENSOR_IIO_TRIGGER
	60	tristate "HID ALS"
	61	help
	62	Say yes here to build support for the HID SENSOR
	63	Ambient light sensor.
	64
9c8ea1b2 JH	65	config SENSORS_LM3533
	66	tristate "LM3533 ambient light sensor"
	67	depends on MFD_LM3533
	68	help
	69	If you say yes here you get support for the ambient light sensor
	70	interface on National Semiconductor / TI LM3533 Lighting Power
	71	chips.
	72
	73	The sensor interface can be used to control the LEDs and backlights
	74	of the chip through defining five light zones and three sets of
	75	corresponding output-current values.
	76
	77	The driver provides raw and mean adc readings along with the current
	78	light zone through sysfs. A threshold event can be generated on zone
	79	changes. The ALS-control output values can be set per zone for the
	80	three current output channels.
62a1efb9	81
eb869ade PM	82	config TCS3472
	83	tristate "TAOS TCS3472 color light-to-digital converter"
	84	depends on I2C
089b54bd PM	85	select IIO_BUFFER
089b54bd PM	86	select IIO_TRIGGERED_BUFFER
eb869ade PM	87	help
	88	If you say yes here you get support for the TAOS TCS3472
	89	family of color light-to-digital converters with IR filter.
	90
	91	This driver can also be built as a module. If so, the module
	92	will be called tcs3472.
	93
9c2251dd JC	94	config SENSORS_TSL2563
	95	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	96	depends on I2C
	97	help
	98	If you say yes here you get support for the Taos TSL2560,
	99	TSL2561, TSL2562 and TSL2563 ambient light sensors.
	100
	101	This driver can also be built as a module. If so, the module
	102	will be called tsl2563.
	103
aab9ba7e PM	104	config TSL4531
	105	tristate "TAOS TSL4531 ambient light sensors"
	106	depends on I2C
	107	help
	108	Say Y here if you want to build a driver for the TAOS TSL4531 family
	109	of ambient light sensors with direct lux output.
	110
	111	To compile this driver as a module, choose M here: the
	112	module will be called tsl4531.
	113
62a1efb9 PM	114	config VCNL4000
	115	tristate "VCNL4000 combined ALS and proximity sensor"
	116	depends on I2C
	117	help
	118	Say Y here if you want to build a driver for the Vishay VCNL4000
	119	combined ambient light and proximity sensor.
	120
	121	To compile this driver as a module, choose M here: the
	122	module will be called vcnl4000.
	123
9c8ea1b2	124	endmenu