Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * eth1394.c -- Ethernet driver for Linux IEEE-1394 Subsystem | |
3 | * | |
4 | * Copyright (C) 2001-2003 Ben Collins <bcollins@debian.org> | |
5 | * 2000 Bonin Franck <boninf@free.fr> | |
6 | * 2003 Steve Kinneberg <kinnebergsteve@acmsystems.com> | |
7 | * | |
8 | * Mainly based on work by Emanuel Pirker and Andreas E. Bombe | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software Foundation, | |
22 | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
23 | */ | |
24 | ||
25 | /* This driver intends to support RFC 2734, which describes a method for | |
26 | * transporting IPv4 datagrams over IEEE-1394 serial busses. This driver | |
27 | * will ultimately support that method, but currently falls short in | |
28 | * several areas. | |
29 | * | |
30 | * TODO: | |
31 | * RFC 2734 related: | |
32 | * - Add MCAP. Limited Multicast exists only to 224.0.0.1 and 224.0.0.2. | |
33 | * | |
34 | * Non-RFC 2734 related: | |
35 | * - Handle fragmented skb's coming from the networking layer. | |
36 | * - Move generic GASP reception to core 1394 code | |
37 | * - Convert kmalloc/kfree for link fragments to use kmem_cache_* instead | |
38 | * - Stability improvements | |
39 | * - Performance enhancements | |
40 | * - Consider garbage collecting old partial datagrams after X amount of time | |
41 | */ | |
42 | ||
43 | ||
44 | #include <linux/module.h> | |
45 | ||
46 | #include <linux/sched.h> | |
47 | #include <linux/kernel.h> | |
48 | #include <linux/slab.h> | |
49 | #include <linux/errno.h> | |
50 | #include <linux/types.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/init.h> | |
53 | ||
54 | #include <linux/netdevice.h> | |
55 | #include <linux/inetdevice.h> | |
56 | #include <linux/etherdevice.h> | |
57 | #include <linux/if_arp.h> | |
58 | #include <linux/if_ether.h> | |
59 | #include <linux/ip.h> | |
60 | #include <linux/in.h> | |
61 | #include <linux/tcp.h> | |
62 | #include <linux/skbuff.h> | |
63 | #include <linux/bitops.h> | |
64 | #include <linux/ethtool.h> | |
65 | #include <asm/uaccess.h> | |
66 | #include <asm/delay.h> | |
67 | #include <asm/semaphore.h> | |
68 | #include <net/arp.h> | |
69 | ||
70 | #include "csr1212.h" | |
71 | #include "ieee1394_types.h" | |
72 | #include "ieee1394_core.h" | |
73 | #include "ieee1394_transactions.h" | |
74 | #include "ieee1394.h" | |
75 | #include "highlevel.h" | |
76 | #include "iso.h" | |
77 | #include "nodemgr.h" | |
78 | #include "eth1394.h" | |
79 | #include "config_roms.h" | |
80 | ||
81 | #define ETH1394_PRINT_G(level, fmt, args...) \ | |
82 | printk(level "%s: " fmt, driver_name, ## args) | |
83 | ||
84 | #define ETH1394_PRINT(level, dev_name, fmt, args...) \ | |
85 | printk(level "%s: %s: " fmt, driver_name, dev_name, ## args) | |
86 | ||
87 | #define DEBUG(fmt, args...) \ | |
88 | printk(KERN_ERR "%s:%s[%d]: " fmt "\n", driver_name, __FUNCTION__, __LINE__, ## args) | |
89 | #define TRACE() printk(KERN_ERR "%s:%s[%d] ---- TRACE\n", driver_name, __FUNCTION__, __LINE__) | |
90 | ||
1da177e4 LT |
91 | struct fragment_info { |
92 | struct list_head list; | |
93 | int offset; | |
94 | int len; | |
95 | }; | |
96 | ||
97 | struct partial_datagram { | |
98 | struct list_head list; | |
99 | u16 dgl; | |
100 | u16 dg_size; | |
101 | u16 ether_type; | |
102 | struct sk_buff *skb; | |
103 | char *pbuf; | |
104 | struct list_head frag_info; | |
105 | }; | |
106 | ||
107 | struct pdg_list { | |
108 | struct list_head list; /* partial datagram list per node */ | |
109 | unsigned int sz; /* partial datagram list size per node */ | |
110 | spinlock_t lock; /* partial datagram lock */ | |
111 | }; | |
112 | ||
113 | struct eth1394_host_info { | |
114 | struct hpsb_host *host; | |
115 | struct net_device *dev; | |
116 | }; | |
117 | ||
118 | struct eth1394_node_ref { | |
119 | struct unit_directory *ud; | |
120 | struct list_head list; | |
121 | }; | |
122 | ||
123 | struct eth1394_node_info { | |
124 | u16 maxpayload; /* Max payload */ | |
125 | u8 sspd; /* Max speed */ | |
126 | u64 fifo; /* FIFO address */ | |
127 | struct pdg_list pdg; /* partial RX datagram lists */ | |
128 | int dgl; /* Outgoing datagram label */ | |
129 | }; | |
130 | ||
131 | /* Our ieee1394 highlevel driver */ | |
132 | #define ETH1394_DRIVER_NAME "eth1394" | |
133 | static const char driver_name[] = ETH1394_DRIVER_NAME; | |
134 | ||
135 | static kmem_cache_t *packet_task_cache; | |
136 | ||
137 | static struct hpsb_highlevel eth1394_highlevel; | |
138 | ||
139 | /* Use common.lf to determine header len */ | |
140 | static const int hdr_type_len[] = { | |
141 | sizeof (struct eth1394_uf_hdr), | |
142 | sizeof (struct eth1394_ff_hdr), | |
143 | sizeof (struct eth1394_sf_hdr), | |
144 | sizeof (struct eth1394_sf_hdr) | |
145 | }; | |
146 | ||
147 | /* Change this to IEEE1394_SPEED_S100 to make testing easier */ | |
148 | #define ETH1394_SPEED_DEF IEEE1394_SPEED_MAX | |
149 | ||
150 | /* For now, this needs to be 1500, so that XP works with us */ | |
151 | #define ETH1394_DATA_LEN ETH_DATA_LEN | |
152 | ||
153 | static const u16 eth1394_speedto_maxpayload[] = { | |
154 | /* S100, S200, S400, S800, S1600, S3200 */ | |
155 | 512, 1024, 2048, 4096, 4096, 4096 | |
156 | }; | |
157 | ||
158 | MODULE_AUTHOR("Ben Collins (bcollins@debian.org)"); | |
159 | MODULE_DESCRIPTION("IEEE 1394 IPv4 Driver (IPv4-over-1394 as per RFC 2734)"); | |
160 | MODULE_LICENSE("GPL"); | |
161 | ||
162 | /* The max_partial_datagrams parameter is the maximum number of fragmented | |
163 | * datagrams per node that eth1394 will keep in memory. Providing an upper | |
164 | * bound allows us to limit the amount of memory that partial datagrams | |
165 | * consume in the event that some partial datagrams are never completed. | |
166 | */ | |
167 | static int max_partial_datagrams = 25; | |
168 | module_param(max_partial_datagrams, int, S_IRUGO | S_IWUSR); | |
169 | MODULE_PARM_DESC(max_partial_datagrams, | |
170 | "Maximum number of partially received fragmented datagrams " | |
171 | "(default = 25)."); | |
172 | ||
173 | ||
174 | static int ether1394_header(struct sk_buff *skb, struct net_device *dev, | |
175 | unsigned short type, void *daddr, void *saddr, | |
176 | unsigned len); | |
177 | static int ether1394_rebuild_header(struct sk_buff *skb); | |
178 | static int ether1394_header_parse(struct sk_buff *skb, unsigned char *haddr); | |
179 | static int ether1394_header_cache(struct neighbour *neigh, struct hh_cache *hh); | |
180 | static void ether1394_header_cache_update(struct hh_cache *hh, | |
181 | struct net_device *dev, | |
182 | unsigned char * haddr); | |
183 | static int ether1394_mac_addr(struct net_device *dev, void *p); | |
184 | ||
185 | static void purge_partial_datagram(struct list_head *old); | |
186 | static int ether1394_tx(struct sk_buff *skb, struct net_device *dev); | |
187 | static void ether1394_iso(struct hpsb_iso *iso); | |
188 | ||
189 | static struct ethtool_ops ethtool_ops; | |
190 | ||
191 | static int ether1394_write(struct hpsb_host *host, int srcid, int destid, | |
192 | quadlet_t *data, u64 addr, size_t len, u16 flags); | |
193 | static void ether1394_add_host (struct hpsb_host *host); | |
194 | static void ether1394_remove_host (struct hpsb_host *host); | |
195 | static void ether1394_host_reset (struct hpsb_host *host); | |
196 | ||
197 | /* Function for incoming 1394 packets */ | |
198 | static struct hpsb_address_ops addr_ops = { | |
199 | .write = ether1394_write, | |
200 | }; | |
201 | ||
202 | /* Ieee1394 highlevel driver functions */ | |
203 | static struct hpsb_highlevel eth1394_highlevel = { | |
204 | .name = driver_name, | |
205 | .add_host = ether1394_add_host, | |
206 | .remove_host = ether1394_remove_host, | |
207 | .host_reset = ether1394_host_reset, | |
208 | }; | |
209 | ||
210 | ||
211 | /* This is called after an "ifup" */ | |
212 | static int ether1394_open (struct net_device *dev) | |
213 | { | |
214 | struct eth1394_priv *priv = netdev_priv(dev); | |
215 | int ret = 0; | |
216 | ||
217 | /* Something bad happened, don't even try */ | |
218 | if (priv->bc_state == ETHER1394_BC_ERROR) { | |
219 | /* we'll try again */ | |
220 | priv->iso = hpsb_iso_recv_init(priv->host, | |
3ae3d0d4 | 221 | ETHER1394_ISO_BUF_SIZE, |
1da177e4 LT |
222 | ETHER1394_GASP_BUFFERS, |
223 | priv->broadcast_channel, | |
224 | HPSB_ISO_DMA_PACKET_PER_BUFFER, | |
225 | 1, ether1394_iso); | |
226 | if (priv->iso == NULL) { | |
227 | ETH1394_PRINT(KERN_ERR, dev->name, | |
228 | "Could not allocate isochronous receive " | |
229 | "context for the broadcast channel\n"); | |
230 | priv->bc_state = ETHER1394_BC_ERROR; | |
231 | ret = -EAGAIN; | |
232 | } else { | |
233 | if (hpsb_iso_recv_start(priv->iso, -1, (1 << 3), -1) < 0) | |
234 | priv->bc_state = ETHER1394_BC_STOPPED; | |
235 | else | |
236 | priv->bc_state = ETHER1394_BC_RUNNING; | |
237 | } | |
238 | } | |
239 | ||
240 | if (ret) | |
241 | return ret; | |
242 | ||
243 | netif_start_queue (dev); | |
244 | return 0; | |
245 | } | |
246 | ||
247 | /* This is called after an "ifdown" */ | |
248 | static int ether1394_stop (struct net_device *dev) | |
249 | { | |
250 | netif_stop_queue (dev); | |
251 | return 0; | |
252 | } | |
253 | ||
254 | /* Return statistics to the caller */ | |
255 | static struct net_device_stats *ether1394_stats (struct net_device *dev) | |
256 | { | |
257 | return &(((struct eth1394_priv *)netdev_priv(dev))->stats); | |
258 | } | |
259 | ||
260 | /* What to do if we timeout. I think a host reset is probably in order, so | |
261 | * that's what we do. Should we increment the stat counters too? */ | |
262 | static void ether1394_tx_timeout (struct net_device *dev) | |
263 | { | |
264 | ETH1394_PRINT (KERN_ERR, dev->name, "Timeout, resetting host %s\n", | |
265 | ((struct eth1394_priv *)netdev_priv(dev))->host->driver->name); | |
266 | ||
267 | highlevel_host_reset (((struct eth1394_priv *)netdev_priv(dev))->host); | |
268 | ||
269 | netif_wake_queue (dev); | |
270 | } | |
271 | ||
272 | static int ether1394_change_mtu(struct net_device *dev, int new_mtu) | |
273 | { | |
274 | struct eth1394_priv *priv = netdev_priv(dev); | |
275 | ||
276 | if ((new_mtu < 68) || | |
277 | (new_mtu > min(ETH1394_DATA_LEN, | |
278 | (int)((1 << (priv->host->csr.max_rec + 1)) - | |
279 | (sizeof(union eth1394_hdr) + | |
280 | ETHER1394_GASP_OVERHEAD))))) | |
281 | return -EINVAL; | |
282 | dev->mtu = new_mtu; | |
283 | return 0; | |
284 | } | |
285 | ||
286 | static void purge_partial_datagram(struct list_head *old) | |
287 | { | |
288 | struct partial_datagram *pd = list_entry(old, struct partial_datagram, list); | |
289 | struct list_head *lh, *n; | |
290 | ||
291 | list_for_each_safe(lh, n, &pd->frag_info) { | |
292 | struct fragment_info *fi = list_entry(lh, struct fragment_info, list); | |
293 | list_del(lh); | |
294 | kfree(fi); | |
295 | } | |
296 | list_del(old); | |
297 | kfree_skb(pd->skb); | |
298 | kfree(pd); | |
299 | } | |
300 | ||
301 | /****************************************** | |
302 | * 1394 bus activity functions | |
303 | ******************************************/ | |
304 | ||
305 | static struct eth1394_node_ref *eth1394_find_node(struct list_head *inl, | |
306 | struct unit_directory *ud) | |
307 | { | |
308 | struct eth1394_node_ref *node; | |
309 | ||
310 | list_for_each_entry(node, inl, list) | |
311 | if (node->ud == ud) | |
312 | return node; | |
313 | ||
314 | return NULL; | |
315 | } | |
316 | ||
317 | static struct eth1394_node_ref *eth1394_find_node_guid(struct list_head *inl, | |
318 | u64 guid) | |
319 | { | |
320 | struct eth1394_node_ref *node; | |
321 | ||
322 | list_for_each_entry(node, inl, list) | |
323 | if (node->ud->ne->guid == guid) | |
324 | return node; | |
325 | ||
326 | return NULL; | |
327 | } | |
328 | ||
329 | static struct eth1394_node_ref *eth1394_find_node_nodeid(struct list_head *inl, | |
330 | nodeid_t nodeid) | |
331 | { | |
332 | struct eth1394_node_ref *node; | |
333 | list_for_each_entry(node, inl, list) { | |
334 | if (node->ud->ne->nodeid == nodeid) | |
335 | return node; | |
336 | } | |
337 | ||
338 | return NULL; | |
339 | } | |
340 | ||
341 | static int eth1394_probe(struct device *dev) | |
342 | { | |
343 | struct unit_directory *ud; | |
344 | struct eth1394_host_info *hi; | |
345 | struct eth1394_priv *priv; | |
346 | struct eth1394_node_ref *new_node; | |
347 | struct eth1394_node_info *node_info; | |
348 | ||
349 | ud = container_of(dev, struct unit_directory, device); | |
350 | ||
351 | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | |
352 | if (!hi) | |
353 | return -ENOENT; | |
354 | ||
8551158a | 355 | new_node = kmalloc(sizeof(*new_node), |
1da177e4 LT |
356 | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); |
357 | if (!new_node) | |
358 | return -ENOMEM; | |
359 | ||
8551158a | 360 | node_info = kmalloc(sizeof(*node_info), |
1da177e4 LT |
361 | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); |
362 | if (!node_info) { | |
363 | kfree(new_node); | |
364 | return -ENOMEM; | |
365 | } | |
366 | ||
367 | spin_lock_init(&node_info->pdg.lock); | |
368 | INIT_LIST_HEAD(&node_info->pdg.list); | |
369 | node_info->pdg.sz = 0; | |
6737231e | 370 | node_info->fifo = CSR1212_INVALID_ADDR_SPACE; |
1da177e4 LT |
371 | |
372 | ud->device.driver_data = node_info; | |
373 | new_node->ud = ud; | |
374 | ||
375 | priv = netdev_priv(hi->dev); | |
376 | list_add_tail(&new_node->list, &priv->ip_node_list); | |
377 | ||
378 | return 0; | |
379 | } | |
380 | ||
381 | static int eth1394_remove(struct device *dev) | |
382 | { | |
383 | struct unit_directory *ud; | |
384 | struct eth1394_host_info *hi; | |
385 | struct eth1394_priv *priv; | |
386 | struct eth1394_node_ref *old_node; | |
387 | struct eth1394_node_info *node_info; | |
388 | struct list_head *lh, *n; | |
389 | unsigned long flags; | |
390 | ||
391 | ud = container_of(dev, struct unit_directory, device); | |
392 | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | |
393 | if (!hi) | |
394 | return -ENOENT; | |
395 | ||
396 | priv = netdev_priv(hi->dev); | |
397 | ||
398 | old_node = eth1394_find_node(&priv->ip_node_list, ud); | |
399 | ||
400 | if (old_node) { | |
401 | list_del(&old_node->list); | |
402 | kfree(old_node); | |
403 | ||
404 | node_info = (struct eth1394_node_info*)ud->device.driver_data; | |
405 | ||
406 | spin_lock_irqsave(&node_info->pdg.lock, flags); | |
407 | /* The partial datagram list should be empty, but we'll just | |
408 | * make sure anyway... */ | |
409 | list_for_each_safe(lh, n, &node_info->pdg.list) { | |
410 | purge_partial_datagram(lh); | |
411 | } | |
412 | spin_unlock_irqrestore(&node_info->pdg.lock, flags); | |
413 | ||
414 | kfree(node_info); | |
415 | ud->device.driver_data = NULL; | |
416 | } | |
417 | return 0; | |
418 | } | |
419 | ||
420 | static int eth1394_update(struct unit_directory *ud) | |
421 | { | |
422 | struct eth1394_host_info *hi; | |
423 | struct eth1394_priv *priv; | |
424 | struct eth1394_node_ref *node; | |
425 | struct eth1394_node_info *node_info; | |
426 | ||
427 | hi = hpsb_get_hostinfo(ð1394_highlevel, ud->ne->host); | |
428 | if (!hi) | |
429 | return -ENOENT; | |
430 | ||
431 | priv = netdev_priv(hi->dev); | |
432 | ||
433 | node = eth1394_find_node(&priv->ip_node_list, ud); | |
434 | ||
435 | if (!node) { | |
8551158a | 436 | node = kmalloc(sizeof(*node), |
1da177e4 LT |
437 | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); |
438 | if (!node) | |
439 | return -ENOMEM; | |
440 | ||
8551158a | 441 | node_info = kmalloc(sizeof(*node_info), |
1da177e4 LT |
442 | in_interrupt() ? GFP_ATOMIC : GFP_KERNEL); |
443 | if (!node_info) { | |
444 | kfree(node); | |
445 | return -ENOMEM; | |
446 | } | |
447 | ||
448 | spin_lock_init(&node_info->pdg.lock); | |
449 | INIT_LIST_HEAD(&node_info->pdg.list); | |
450 | node_info->pdg.sz = 0; | |
451 | ||
452 | ud->device.driver_data = node_info; | |
453 | node->ud = ud; | |
454 | ||
455 | priv = netdev_priv(hi->dev); | |
456 | list_add_tail(&node->list, &priv->ip_node_list); | |
457 | } | |
458 | ||
459 | return 0; | |
460 | } | |
461 | ||
462 | ||
463 | static struct ieee1394_device_id eth1394_id_table[] = { | |
464 | { | |
465 | .match_flags = (IEEE1394_MATCH_SPECIFIER_ID | | |
466 | IEEE1394_MATCH_VERSION), | |
467 | .specifier_id = ETHER1394_GASP_SPECIFIER_ID, | |
468 | .version = ETHER1394_GASP_VERSION, | |
469 | }, | |
470 | {} | |
471 | }; | |
472 | ||
473 | MODULE_DEVICE_TABLE(ieee1394, eth1394_id_table); | |
474 | ||
475 | static struct hpsb_protocol_driver eth1394_proto_driver = { | |
476 | .name = "IPv4 over 1394 Driver", | |
477 | .id_table = eth1394_id_table, | |
478 | .update = eth1394_update, | |
479 | .driver = { | |
480 | .name = ETH1394_DRIVER_NAME, | |
481 | .bus = &ieee1394_bus_type, | |
482 | .probe = eth1394_probe, | |
483 | .remove = eth1394_remove, | |
484 | }, | |
485 | }; | |
486 | ||
487 | ||
488 | static void ether1394_reset_priv (struct net_device *dev, int set_mtu) | |
489 | { | |
490 | unsigned long flags; | |
491 | int i; | |
492 | struct eth1394_priv *priv = netdev_priv(dev); | |
493 | struct hpsb_host *host = priv->host; | |
494 | u64 guid = *((u64*)&(host->csr.rom->bus_info_data[3])); | |
495 | u16 maxpayload = 1 << (host->csr.max_rec + 1); | |
496 | int max_speed = IEEE1394_SPEED_MAX; | |
497 | ||
498 | spin_lock_irqsave (&priv->lock, flags); | |
499 | ||
500 | memset(priv->ud_list, 0, sizeof(struct node_entry*) * ALL_NODES); | |
501 | priv->bc_maxpayload = 512; | |
502 | ||
503 | /* Determine speed limit */ | |
504 | for (i = 0; i < host->node_count; i++) | |
647dcb5f BC |
505 | if (max_speed > host->speed[i]) |
506 | max_speed = host->speed[i]; | |
1da177e4 LT |
507 | priv->bc_sspd = max_speed; |
508 | ||
509 | /* We'll use our maxpayload as the default mtu */ | |
510 | if (set_mtu) { | |
511 | dev->mtu = min(ETH1394_DATA_LEN, | |
512 | (int)(maxpayload - | |
513 | (sizeof(union eth1394_hdr) + | |
514 | ETHER1394_GASP_OVERHEAD))); | |
515 | ||
516 | /* Set our hardware address while we're at it */ | |
517 | *(u64*)dev->dev_addr = guid; | |
518 | *(u64*)dev->broadcast = ~0x0ULL; | |
519 | } | |
520 | ||
521 | spin_unlock_irqrestore (&priv->lock, flags); | |
522 | } | |
523 | ||
524 | /* This function is called right before register_netdev */ | |
525 | static void ether1394_init_dev (struct net_device *dev) | |
526 | { | |
527 | /* Our functions */ | |
528 | dev->open = ether1394_open; | |
529 | dev->stop = ether1394_stop; | |
530 | dev->hard_start_xmit = ether1394_tx; | |
531 | dev->get_stats = ether1394_stats; | |
532 | dev->tx_timeout = ether1394_tx_timeout; | |
533 | dev->change_mtu = ether1394_change_mtu; | |
534 | ||
535 | dev->hard_header = ether1394_header; | |
536 | dev->rebuild_header = ether1394_rebuild_header; | |
537 | dev->hard_header_cache = ether1394_header_cache; | |
538 | dev->header_cache_update= ether1394_header_cache_update; | |
539 | dev->hard_header_parse = ether1394_header_parse; | |
540 | dev->set_mac_address = ether1394_mac_addr; | |
541 | SET_ETHTOOL_OPS(dev, ðtool_ops); | |
542 | ||
543 | /* Some constants */ | |
544 | dev->watchdog_timeo = ETHER1394_TIMEOUT; | |
545 | dev->flags = IFF_BROADCAST | IFF_MULTICAST; | |
546 | dev->features = NETIF_F_HIGHDMA; | |
547 | dev->addr_len = ETH1394_ALEN; | |
548 | dev->hard_header_len = ETH1394_HLEN; | |
549 | dev->type = ARPHRD_IEEE1394; | |
550 | ||
551 | ether1394_reset_priv (dev, 1); | |
552 | } | |
553 | ||
554 | /* | |
555 | * This function is called every time a card is found. It is generally called | |
556 | * when the module is installed. This is where we add all of our ethernet | |
557 | * devices. One for each host. | |
558 | */ | |
559 | static void ether1394_add_host (struct hpsb_host *host) | |
560 | { | |
561 | struct eth1394_host_info *hi = NULL; | |
562 | struct net_device *dev = NULL; | |
563 | struct eth1394_priv *priv; | |
1da177e4 LT |
564 | u64 fifo_addr; |
565 | ||
566 | if (!(host->config_roms & HPSB_CONFIG_ROM_ENTRY_IP1394)) | |
567 | return; | |
568 | ||
6737231e BC |
569 | fifo_addr = hpsb_allocate_and_register_addrspace( |
570 | ð1394_highlevel, host, &addr_ops, | |
571 | ETHER1394_REGION_ADDR_LEN, ETHER1394_REGION_ADDR_LEN, | |
572 | CSR1212_INVALID_ADDR_SPACE, CSR1212_INVALID_ADDR_SPACE); | |
573 | if (fifo_addr == CSR1212_INVALID_ADDR_SPACE) | |
1da177e4 LT |
574 | goto out; |
575 | ||
1da177e4 LT |
576 | /* We should really have our own alloc_hpsbdev() function in |
577 | * net_init.c instead of calling the one for ethernet then hijacking | |
578 | * it for ourselves. That way we'd be a real networking device. */ | |
579 | dev = alloc_etherdev(sizeof (struct eth1394_priv)); | |
580 | ||
581 | if (dev == NULL) { | |
582 | ETH1394_PRINT_G (KERN_ERR, "Out of memory trying to allocate " | |
583 | "etherdevice for IEEE 1394 device %s-%d\n", | |
584 | host->driver->name, host->id); | |
585 | goto out; | |
586 | } | |
587 | ||
588 | SET_MODULE_OWNER(dev); | |
589 | SET_NETDEV_DEV(dev, &host->device); | |
590 | ||
591 | priv = netdev_priv(dev); | |
592 | ||
593 | INIT_LIST_HEAD(&priv->ip_node_list); | |
594 | ||
595 | spin_lock_init(&priv->lock); | |
596 | priv->host = host; | |
597 | priv->local_fifo = fifo_addr; | |
598 | ||
599 | hi = hpsb_create_hostinfo(ð1394_highlevel, host, sizeof(*hi)); | |
600 | ||
601 | if (hi == NULL) { | |
602 | ETH1394_PRINT_G (KERN_ERR, "Out of memory trying to create " | |
603 | "hostinfo for IEEE 1394 device %s-%d\n", | |
604 | host->driver->name, host->id); | |
605 | goto out; | |
606 | } | |
607 | ||
608 | ether1394_init_dev(dev); | |
609 | ||
610 | if (register_netdev (dev)) { | |
611 | ETH1394_PRINT (KERN_ERR, dev->name, "Error registering network driver\n"); | |
612 | goto out; | |
613 | } | |
614 | ||
615 | ETH1394_PRINT (KERN_INFO, dev->name, "IEEE-1394 IPv4 over 1394 Ethernet (fw-host%d)\n", | |
616 | host->id); | |
617 | ||
618 | hi->host = host; | |
619 | hi->dev = dev; | |
620 | ||
621 | /* Ignore validity in hopes that it will be set in the future. It'll | |
622 | * be checked when the eth device is opened. */ | |
623 | priv->broadcast_channel = host->csr.broadcast_channel & 0x3f; | |
624 | ||
3ae3d0d4 JM |
625 | priv->iso = hpsb_iso_recv_init(host, |
626 | ETHER1394_ISO_BUF_SIZE, | |
1da177e4 LT |
627 | ETHER1394_GASP_BUFFERS, |
628 | priv->broadcast_channel, | |
629 | HPSB_ISO_DMA_PACKET_PER_BUFFER, | |
630 | 1, ether1394_iso); | |
631 | if (priv->iso == NULL) { | |
632 | ETH1394_PRINT(KERN_ERR, dev->name, | |
633 | "Could not allocate isochronous receive context " | |
634 | "for the broadcast channel\n"); | |
635 | priv->bc_state = ETHER1394_BC_ERROR; | |
636 | } else { | |
637 | if (hpsb_iso_recv_start(priv->iso, -1, (1 << 3), -1) < 0) | |
638 | priv->bc_state = ETHER1394_BC_STOPPED; | |
639 | else | |
640 | priv->bc_state = ETHER1394_BC_RUNNING; | |
641 | } | |
642 | ||
643 | return; | |
644 | ||
645 | out: | |
646 | if (dev != NULL) | |
647 | free_netdev(dev); | |
648 | if (hi) | |
649 | hpsb_destroy_hostinfo(ð1394_highlevel, host); | |
650 | ||
651 | return; | |
652 | } | |
653 | ||
654 | /* Remove a card from our list */ | |
655 | static void ether1394_remove_host (struct hpsb_host *host) | |
656 | { | |
657 | struct eth1394_host_info *hi; | |
658 | ||
659 | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | |
660 | if (hi != NULL) { | |
661 | struct eth1394_priv *priv = netdev_priv(hi->dev); | |
662 | ||
663 | hpsb_unregister_addrspace(ð1394_highlevel, host, | |
664 | priv->local_fifo); | |
665 | ||
666 | if (priv->iso != NULL) | |
667 | hpsb_iso_shutdown(priv->iso); | |
668 | ||
669 | if (hi->dev) { | |
670 | unregister_netdev (hi->dev); | |
671 | free_netdev(hi->dev); | |
672 | } | |
673 | } | |
674 | ||
675 | return; | |
676 | } | |
677 | ||
678 | /* A reset has just arisen */ | |
679 | static void ether1394_host_reset (struct hpsb_host *host) | |
680 | { | |
681 | struct eth1394_host_info *hi; | |
682 | struct eth1394_priv *priv; | |
683 | struct net_device *dev; | |
684 | struct list_head *lh, *n; | |
685 | struct eth1394_node_ref *node; | |
686 | struct eth1394_node_info *node_info; | |
687 | unsigned long flags; | |
688 | ||
689 | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | |
690 | ||
691 | /* This can happen for hosts that we don't use */ | |
692 | if (hi == NULL) | |
693 | return; | |
694 | ||
695 | dev = hi->dev; | |
1934b8b6 | 696 | priv = (struct eth1394_priv *)netdev_priv(dev); |
1da177e4 LT |
697 | |
698 | /* Reset our private host data, but not our mtu */ | |
699 | netif_stop_queue (dev); | |
700 | ether1394_reset_priv (dev, 0); | |
701 | ||
702 | list_for_each_entry(node, &priv->ip_node_list, list) { | |
703 | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | |
704 | ||
705 | spin_lock_irqsave(&node_info->pdg.lock, flags); | |
706 | ||
707 | list_for_each_safe(lh, n, &node_info->pdg.list) { | |
708 | purge_partial_datagram(lh); | |
709 | } | |
710 | ||
711 | INIT_LIST_HEAD(&(node_info->pdg.list)); | |
712 | node_info->pdg.sz = 0; | |
713 | ||
714 | spin_unlock_irqrestore(&node_info->pdg.lock, flags); | |
715 | } | |
716 | ||
717 | netif_wake_queue (dev); | |
718 | } | |
719 | ||
720 | /****************************************** | |
721 | * HW Header net device functions | |
722 | ******************************************/ | |
723 | /* These functions have been adapted from net/ethernet/eth.c */ | |
724 | ||
725 | ||
726 | /* Create a fake MAC header for an arbitrary protocol layer. | |
727 | * saddr=NULL means use device source address | |
728 | * daddr=NULL means leave destination address (eg unresolved arp). */ | |
729 | static int ether1394_header(struct sk_buff *skb, struct net_device *dev, | |
730 | unsigned short type, void *daddr, void *saddr, | |
731 | unsigned len) | |
732 | { | |
733 | struct eth1394hdr *eth = (struct eth1394hdr *)skb_push(skb, ETH1394_HLEN); | |
734 | ||
735 | eth->h_proto = htons(type); | |
736 | ||
737 | if (dev->flags & (IFF_LOOPBACK|IFF_NOARP)) { | |
738 | memset(eth->h_dest, 0, dev->addr_len); | |
739 | return(dev->hard_header_len); | |
740 | } | |
741 | ||
742 | if (daddr) { | |
743 | memcpy(eth->h_dest,daddr,dev->addr_len); | |
744 | return dev->hard_header_len; | |
745 | } | |
746 | ||
747 | return -dev->hard_header_len; | |
748 | ||
749 | } | |
750 | ||
751 | ||
752 | /* Rebuild the faked MAC header. This is called after an ARP | |
753 | * (or in future other address resolution) has completed on this | |
754 | * sk_buff. We now let ARP fill in the other fields. | |
755 | * | |
756 | * This routine CANNOT use cached dst->neigh! | |
757 | * Really, it is used only when dst->neigh is wrong. | |
758 | */ | |
759 | static int ether1394_rebuild_header(struct sk_buff *skb) | |
760 | { | |
761 | struct eth1394hdr *eth = (struct eth1394hdr *)skb->data; | |
762 | struct net_device *dev = skb->dev; | |
763 | ||
764 | switch (eth->h_proto) { | |
765 | ||
766 | #ifdef CONFIG_INET | |
767 | case __constant_htons(ETH_P_IP): | |
768 | return arp_find((unsigned char*)ð->h_dest, skb); | |
769 | #endif | |
770 | default: | |
771 | ETH1394_PRINT(KERN_DEBUG, dev->name, | |
772 | "unable to resolve type %04x addresses.\n", | |
7136b807 | 773 | ntohs(eth->h_proto)); |
1da177e4 LT |
774 | break; |
775 | } | |
776 | ||
777 | return 0; | |
778 | } | |
779 | ||
780 | static int ether1394_header_parse(struct sk_buff *skb, unsigned char *haddr) | |
781 | { | |
782 | struct net_device *dev = skb->dev; | |
783 | memcpy(haddr, dev->dev_addr, ETH1394_ALEN); | |
784 | return ETH1394_ALEN; | |
785 | } | |
786 | ||
787 | ||
788 | static int ether1394_header_cache(struct neighbour *neigh, struct hh_cache *hh) | |
789 | { | |
790 | unsigned short type = hh->hh_type; | |
791 | struct eth1394hdr *eth = (struct eth1394hdr*)(((u8*)hh->hh_data) + | |
792 | (16 - ETH1394_HLEN)); | |
793 | struct net_device *dev = neigh->dev; | |
794 | ||
7136b807 | 795 | if (type == htons(ETH_P_802_3)) |
1da177e4 | 796 | return -1; |
1da177e4 LT |
797 | |
798 | eth->h_proto = type; | |
799 | memcpy(eth->h_dest, neigh->ha, dev->addr_len); | |
800 | ||
801 | hh->hh_len = ETH1394_HLEN; | |
802 | return 0; | |
803 | } | |
804 | ||
805 | /* Called by Address Resolution module to notify changes in address. */ | |
806 | static void ether1394_header_cache_update(struct hh_cache *hh, | |
807 | struct net_device *dev, | |
808 | unsigned char * haddr) | |
809 | { | |
810 | memcpy(((u8*)hh->hh_data) + (16 - ETH1394_HLEN), haddr, dev->addr_len); | |
811 | } | |
812 | ||
813 | static int ether1394_mac_addr(struct net_device *dev, void *p) | |
814 | { | |
815 | if (netif_running(dev)) | |
816 | return -EBUSY; | |
817 | ||
818 | /* Not going to allow setting the MAC address, we really need to use | |
819 | * the real one supplied by the hardware */ | |
820 | return -EINVAL; | |
821 | } | |
822 | ||
823 | ||
824 | ||
825 | /****************************************** | |
826 | * Datagram reception code | |
827 | ******************************************/ | |
828 | ||
829 | /* Copied from net/ethernet/eth.c */ | |
830 | static inline u16 ether1394_type_trans(struct sk_buff *skb, | |
831 | struct net_device *dev) | |
832 | { | |
833 | struct eth1394hdr *eth; | |
834 | unsigned char *rawp; | |
835 | ||
836 | skb->mac.raw = skb->data; | |
837 | skb_pull (skb, ETH1394_HLEN); | |
838 | eth = eth1394_hdr(skb); | |
839 | ||
840 | if (*eth->h_dest & 1) { | |
841 | if (memcmp(eth->h_dest, dev->broadcast, dev->addr_len)==0) | |
842 | skb->pkt_type = PACKET_BROADCAST; | |
843 | #if 0 | |
844 | else | |
845 | skb->pkt_type = PACKET_MULTICAST; | |
846 | #endif | |
847 | } else { | |
848 | if (memcmp(eth->h_dest, dev->dev_addr, dev->addr_len)) | |
849 | skb->pkt_type = PACKET_OTHERHOST; | |
850 | } | |
851 | ||
852 | if (ntohs (eth->h_proto) >= 1536) | |
853 | return eth->h_proto; | |
854 | ||
855 | rawp = skb->data; | |
856 | ||
857 | if (*(unsigned short *)rawp == 0xFFFF) | |
858 | return htons (ETH_P_802_3); | |
859 | ||
860 | return htons (ETH_P_802_2); | |
861 | } | |
862 | ||
863 | /* Parse an encapsulated IP1394 header into an ethernet frame packet. | |
864 | * We also perform ARP translation here, if need be. */ | |
865 | static inline u16 ether1394_parse_encap(struct sk_buff *skb, | |
866 | struct net_device *dev, | |
867 | nodeid_t srcid, nodeid_t destid, | |
868 | u16 ether_type) | |
869 | { | |
870 | struct eth1394_priv *priv = netdev_priv(dev); | |
871 | u64 dest_hw; | |
872 | unsigned short ret = 0; | |
873 | ||
874 | /* Setup our hw addresses. We use these to build the | |
875 | * ethernet header. */ | |
876 | if (destid == (LOCAL_BUS | ALL_NODES)) | |
877 | dest_hw = ~0ULL; /* broadcast */ | |
878 | else | |
879 | dest_hw = cpu_to_be64((((u64)priv->host->csr.guid_hi) << 32) | | |
880 | priv->host->csr.guid_lo); | |
881 | ||
882 | /* If this is an ARP packet, convert it. First, we want to make | |
883 | * use of some of the fields, since they tell us a little bit | |
884 | * about the sending machine. */ | |
7136b807 | 885 | if (ether_type == htons(ETH_P_ARP)) { |
1da177e4 LT |
886 | struct eth1394_arp *arp1394 = (struct eth1394_arp*)skb->data; |
887 | struct arphdr *arp = (struct arphdr *)skb->data; | |
888 | unsigned char *arp_ptr = (unsigned char *)(arp + 1); | |
889 | u64 fifo_addr = (u64)ntohs(arp1394->fifo_hi) << 32 | | |
890 | ntohl(arp1394->fifo_lo); | |
891 | u8 max_rec = min(priv->host->csr.max_rec, | |
892 | (u8)(arp1394->max_rec)); | |
893 | int sspd = arp1394->sspd; | |
894 | u16 maxpayload; | |
895 | struct eth1394_node_ref *node; | |
896 | struct eth1394_node_info *node_info; | |
897 | ||
898 | /* Sanity check. MacOSX seems to be sending us 131 in this | |
899 | * field (atleast on my Panther G5). Not sure why. */ | |
900 | if (sspd > 5 || sspd < 0) | |
901 | sspd = 0; | |
902 | ||
903 | maxpayload = min(eth1394_speedto_maxpayload[sspd], (u16)(1 << (max_rec + 1))); | |
904 | ||
905 | node = eth1394_find_node_guid(&priv->ip_node_list, | |
906 | be64_to_cpu(arp1394->s_uniq_id)); | |
907 | if (!node) { | |
908 | return 0; | |
909 | } | |
910 | ||
911 | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | |
912 | ||
913 | /* Update our speed/payload/fifo_offset table */ | |
914 | node_info->maxpayload = maxpayload; | |
915 | node_info->sspd = sspd; | |
916 | node_info->fifo = fifo_addr; | |
917 | ||
918 | /* Now that we're done with the 1394 specific stuff, we'll | |
919 | * need to alter some of the data. Believe it or not, all | |
920 | * that needs to be done is sender_IP_address needs to be | |
921 | * moved, the destination hardware address get stuffed | |
922 | * in and the hardware address length set to 8. | |
923 | * | |
924 | * IMPORTANT: The code below overwrites 1394 specific data | |
925 | * needed above so keep the munging of the data for the | |
926 | * higher level IP stack last. */ | |
927 | ||
928 | arp->ar_hln = 8; | |
929 | arp_ptr += arp->ar_hln; /* skip over sender unique id */ | |
930 | *(u32*)arp_ptr = arp1394->sip; /* move sender IP addr */ | |
931 | arp_ptr += arp->ar_pln; /* skip over sender IP addr */ | |
932 | ||
02f4213f | 933 | if (arp->ar_op == htons(ARPOP_REQUEST)) |
1da177e4 LT |
934 | /* just set ARP req target unique ID to 0 */ |
935 | *((u64*)arp_ptr) = 0; | |
936 | else | |
937 | *((u64*)arp_ptr) = *((u64*)dev->dev_addr); | |
938 | } | |
939 | ||
940 | /* Now add the ethernet header. */ | |
7136b807 BC |
941 | if (dev->hard_header(skb, dev, ntohs(ether_type), &dest_hw, NULL, |
942 | skb->len) >= 0) | |
1da177e4 LT |
943 | ret = ether1394_type_trans(skb, dev); |
944 | ||
945 | return ret; | |
946 | } | |
947 | ||
948 | static inline int fragment_overlap(struct list_head *frag_list, int offset, int len) | |
949 | { | |
950 | struct fragment_info *fi; | |
951 | ||
952 | list_for_each_entry(fi, frag_list, list) { | |
953 | if ( ! ((offset > (fi->offset + fi->len - 1)) || | |
954 | ((offset + len - 1) < fi->offset))) | |
955 | return 1; | |
956 | } | |
957 | return 0; | |
958 | } | |
959 | ||
960 | static inline struct list_head *find_partial_datagram(struct list_head *pdgl, int dgl) | |
961 | { | |
962 | struct partial_datagram *pd; | |
963 | ||
964 | list_for_each_entry(pd, pdgl, list) { | |
965 | if (pd->dgl == dgl) | |
966 | return &pd->list; | |
967 | } | |
968 | return NULL; | |
969 | } | |
970 | ||
971 | /* Assumes that new fragment does not overlap any existing fragments */ | |
972 | static inline int new_fragment(struct list_head *frag_info, int offset, int len) | |
973 | { | |
974 | struct list_head *lh; | |
975 | struct fragment_info *fi, *fi2, *new; | |
976 | ||
977 | list_for_each(lh, frag_info) { | |
978 | fi = list_entry(lh, struct fragment_info, list); | |
979 | if ((fi->offset + fi->len) == offset) { | |
980 | /* The new fragment can be tacked on to the end */ | |
981 | fi->len += len; | |
982 | /* Did the new fragment plug a hole? */ | |
983 | fi2 = list_entry(lh->next, struct fragment_info, list); | |
984 | if ((fi->offset + fi->len) == fi2->offset) { | |
985 | /* glue fragments together */ | |
986 | fi->len += fi2->len; | |
987 | list_del(lh->next); | |
988 | kfree(fi2); | |
989 | } | |
990 | return 0; | |
991 | } else if ((offset + len) == fi->offset) { | |
992 | /* The new fragment can be tacked on to the beginning */ | |
993 | fi->offset = offset; | |
994 | fi->len += len; | |
995 | /* Did the new fragment plug a hole? */ | |
996 | fi2 = list_entry(lh->prev, struct fragment_info, list); | |
997 | if ((fi2->offset + fi2->len) == fi->offset) { | |
998 | /* glue fragments together */ | |
999 | fi2->len += fi->len; | |
1000 | list_del(lh); | |
1001 | kfree(fi); | |
1002 | } | |
1003 | return 0; | |
1004 | } else if (offset > (fi->offset + fi->len)) { | |
1005 | break; | |
1006 | } else if ((offset + len) < fi->offset) { | |
1007 | lh = lh->prev; | |
1008 | break; | |
1009 | } | |
1010 | } | |
1011 | ||
8551158a | 1012 | new = kmalloc(sizeof(*new), GFP_ATOMIC); |
1da177e4 LT |
1013 | if (!new) |
1014 | return -ENOMEM; | |
1015 | ||
1016 | new->offset = offset; | |
1017 | new->len = len; | |
1018 | ||
1019 | list_add(&new->list, lh); | |
1020 | ||
1021 | return 0; | |
1022 | } | |
1023 | ||
1024 | static inline int new_partial_datagram(struct net_device *dev, | |
1025 | struct list_head *pdgl, int dgl, | |
1026 | int dg_size, char *frag_buf, | |
1027 | int frag_off, int frag_len) | |
1028 | { | |
1029 | struct partial_datagram *new; | |
1030 | ||
8551158a | 1031 | new = kmalloc(sizeof(*new), GFP_ATOMIC); |
1da177e4 LT |
1032 | if (!new) |
1033 | return -ENOMEM; | |
1034 | ||
1035 | INIT_LIST_HEAD(&new->frag_info); | |
1036 | ||
1037 | if (new_fragment(&new->frag_info, frag_off, frag_len) < 0) { | |
1038 | kfree(new); | |
1039 | return -ENOMEM; | |
1040 | } | |
1041 | ||
1042 | new->dgl = dgl; | |
1043 | new->dg_size = dg_size; | |
1044 | ||
1045 | new->skb = dev_alloc_skb(dg_size + dev->hard_header_len + 15); | |
1046 | if (!new->skb) { | |
1047 | struct fragment_info *fi = list_entry(new->frag_info.next, | |
1048 | struct fragment_info, | |
1049 | list); | |
1050 | kfree(fi); | |
1051 | kfree(new); | |
1052 | return -ENOMEM; | |
1053 | } | |
1054 | ||
1055 | skb_reserve(new->skb, (dev->hard_header_len + 15) & ~15); | |
1056 | new->pbuf = skb_put(new->skb, dg_size); | |
1057 | memcpy(new->pbuf + frag_off, frag_buf, frag_len); | |
1058 | ||
1059 | list_add(&new->list, pdgl); | |
1060 | ||
1061 | return 0; | |
1062 | } | |
1063 | ||
1064 | static inline int update_partial_datagram(struct list_head *pdgl, struct list_head *lh, | |
1065 | char *frag_buf, int frag_off, int frag_len) | |
1066 | { | |
1067 | struct partial_datagram *pd = list_entry(lh, struct partial_datagram, list); | |
1068 | ||
1069 | if (new_fragment(&pd->frag_info, frag_off, frag_len) < 0) { | |
1070 | return -ENOMEM; | |
1071 | } | |
1072 | ||
1073 | memcpy(pd->pbuf + frag_off, frag_buf, frag_len); | |
1074 | ||
1075 | /* Move list entry to beginnig of list so that oldest partial | |
1076 | * datagrams percolate to the end of the list */ | |
1077 | list_del(lh); | |
1078 | list_add(lh, pdgl); | |
1079 | ||
1080 | return 0; | |
1081 | } | |
1082 | ||
1083 | static inline int is_datagram_complete(struct list_head *lh, int dg_size) | |
1084 | { | |
1085 | struct partial_datagram *pd = list_entry(lh, struct partial_datagram, list); | |
1086 | struct fragment_info *fi = list_entry(pd->frag_info.next, | |
1087 | struct fragment_info, list); | |
1088 | ||
1089 | return (fi->len == dg_size); | |
1090 | } | |
1091 | ||
1092 | /* Packet reception. We convert the IP1394 encapsulation header to an | |
1093 | * ethernet header, and fill it with some of our other fields. This is | |
1094 | * an incoming packet from the 1394 bus. */ | |
1095 | static int ether1394_data_handler(struct net_device *dev, int srcid, int destid, | |
1096 | char *buf, int len) | |
1097 | { | |
1098 | struct sk_buff *skb; | |
1099 | unsigned long flags; | |
1100 | struct eth1394_priv *priv = netdev_priv(dev); | |
1101 | union eth1394_hdr *hdr = (union eth1394_hdr *)buf; | |
1102 | u16 ether_type = 0; /* initialized to clear warning */ | |
1103 | int hdr_len; | |
1104 | struct unit_directory *ud = priv->ud_list[NODEID_TO_NODE(srcid)]; | |
1105 | struct eth1394_node_info *node_info; | |
1106 | ||
1107 | if (!ud) { | |
1108 | struct eth1394_node_ref *node; | |
1109 | node = eth1394_find_node_nodeid(&priv->ip_node_list, srcid); | |
1110 | if (!node) { | |
1111 | HPSB_PRINT(KERN_ERR, "ether1394 rx: sender nodeid " | |
1112 | "lookup failure: " NODE_BUS_FMT, | |
1113 | NODE_BUS_ARGS(priv->host, srcid)); | |
1114 | priv->stats.rx_dropped++; | |
1115 | return -1; | |
1116 | } | |
1117 | ud = node->ud; | |
1118 | ||
1119 | priv->ud_list[NODEID_TO_NODE(srcid)] = ud; | |
1120 | } | |
1121 | ||
1122 | node_info = (struct eth1394_node_info*)ud->device.driver_data; | |
1123 | ||
1124 | /* First, did we receive a fragmented or unfragmented datagram? */ | |
1125 | hdr->words.word1 = ntohs(hdr->words.word1); | |
1126 | ||
1127 | hdr_len = hdr_type_len[hdr->common.lf]; | |
1128 | ||
1129 | if (hdr->common.lf == ETH1394_HDR_LF_UF) { | |
1130 | /* An unfragmented datagram has been received by the ieee1394 | |
1131 | * bus. Build an skbuff around it so we can pass it to the | |
1132 | * high level network layer. */ | |
1133 | ||
1134 | skb = dev_alloc_skb(len + dev->hard_header_len + 15); | |
1135 | if (!skb) { | |
1136 | HPSB_PRINT (KERN_ERR, "ether1394 rx: low on mem\n"); | |
1137 | priv->stats.rx_dropped++; | |
1138 | return -1; | |
1139 | } | |
1140 | skb_reserve(skb, (dev->hard_header_len + 15) & ~15); | |
1141 | memcpy(skb_put(skb, len - hdr_len), buf + hdr_len, len - hdr_len); | |
1142 | ether_type = hdr->uf.ether_type; | |
1143 | } else { | |
1144 | /* A datagram fragment has been received, now the fun begins. */ | |
1145 | ||
1146 | struct list_head *pdgl, *lh; | |
1147 | struct partial_datagram *pd; | |
1148 | int fg_off; | |
1149 | int fg_len = len - hdr_len; | |
1150 | int dg_size; | |
1151 | int dgl; | |
1152 | int retval; | |
1153 | struct pdg_list *pdg = &(node_info->pdg); | |
1154 | ||
1155 | hdr->words.word3 = ntohs(hdr->words.word3); | |
1156 | /* The 4th header word is reserved so no need to do ntohs() */ | |
1157 | ||
1158 | if (hdr->common.lf == ETH1394_HDR_LF_FF) { | |
1159 | ether_type = hdr->ff.ether_type; | |
1160 | dgl = hdr->ff.dgl; | |
1161 | dg_size = hdr->ff.dg_size + 1; | |
1162 | fg_off = 0; | |
1163 | } else { | |
1164 | hdr->words.word2 = ntohs(hdr->words.word2); | |
1165 | dgl = hdr->sf.dgl; | |
1166 | dg_size = hdr->sf.dg_size + 1; | |
1167 | fg_off = hdr->sf.fg_off; | |
1168 | } | |
1169 | spin_lock_irqsave(&pdg->lock, flags); | |
1170 | ||
1171 | pdgl = &(pdg->list); | |
1172 | lh = find_partial_datagram(pdgl, dgl); | |
1173 | ||
1174 | if (lh == NULL) { | |
1175 | while (pdg->sz >= max_partial_datagrams) { | |
1176 | /* remove the oldest */ | |
1177 | purge_partial_datagram(pdgl->prev); | |
1178 | pdg->sz--; | |
1179 | } | |
1180 | ||
1181 | retval = new_partial_datagram(dev, pdgl, dgl, dg_size, | |
1182 | buf + hdr_len, fg_off, | |
1183 | fg_len); | |
1184 | if (retval < 0) { | |
1185 | spin_unlock_irqrestore(&pdg->lock, flags); | |
1186 | goto bad_proto; | |
1187 | } | |
1188 | pdg->sz++; | |
1189 | lh = find_partial_datagram(pdgl, dgl); | |
1190 | } else { | |
1191 | struct partial_datagram *pd; | |
1192 | ||
1193 | pd = list_entry(lh, struct partial_datagram, list); | |
1194 | ||
1195 | if (fragment_overlap(&pd->frag_info, fg_off, fg_len)) { | |
1196 | /* Overlapping fragments, obliterate old | |
1197 | * datagram and start new one. */ | |
1198 | purge_partial_datagram(lh); | |
1199 | retval = new_partial_datagram(dev, pdgl, dgl, | |
1200 | dg_size, | |
1201 | buf + hdr_len, | |
1202 | fg_off, fg_len); | |
1203 | if (retval < 0) { | |
1204 | pdg->sz--; | |
1205 | spin_unlock_irqrestore(&pdg->lock, flags); | |
1206 | goto bad_proto; | |
1207 | } | |
1208 | } else { | |
1209 | retval = update_partial_datagram(pdgl, lh, | |
1210 | buf + hdr_len, | |
1211 | fg_off, fg_len); | |
1212 | if (retval < 0) { | |
1213 | /* Couldn't save off fragment anyway | |
1214 | * so might as well obliterate the | |
1215 | * datagram now. */ | |
1216 | purge_partial_datagram(lh); | |
1217 | pdg->sz--; | |
1218 | spin_unlock_irqrestore(&pdg->lock, flags); | |
1219 | goto bad_proto; | |
1220 | } | |
1221 | } /* fragment overlap */ | |
1222 | } /* new datagram or add to existing one */ | |
1223 | ||
1224 | pd = list_entry(lh, struct partial_datagram, list); | |
1225 | ||
1226 | if (hdr->common.lf == ETH1394_HDR_LF_FF) { | |
1227 | pd->ether_type = ether_type; | |
1228 | } | |
1229 | ||
1230 | if (is_datagram_complete(lh, dg_size)) { | |
1231 | ether_type = pd->ether_type; | |
1232 | pdg->sz--; | |
1233 | skb = skb_get(pd->skb); | |
1234 | purge_partial_datagram(lh); | |
1235 | spin_unlock_irqrestore(&pdg->lock, flags); | |
1236 | } else { | |
1237 | /* Datagram is not complete, we're done for the | |
1238 | * moment. */ | |
1239 | spin_unlock_irqrestore(&pdg->lock, flags); | |
1240 | return 0; | |
1241 | } | |
1242 | } /* unframgented datagram or fragmented one */ | |
1243 | ||
1244 | /* Write metadata, and then pass to the receive level */ | |
1245 | skb->dev = dev; | |
1246 | skb->ip_summed = CHECKSUM_UNNECESSARY; /* don't check it */ | |
1247 | ||
1248 | /* Parse the encapsulation header. This actually does the job of | |
1249 | * converting to an ethernet frame header, aswell as arp | |
1250 | * conversion if needed. ARP conversion is easier in this | |
1251 | * direction, since we are using ethernet as our backend. */ | |
1252 | skb->protocol = ether1394_parse_encap(skb, dev, srcid, destid, | |
1253 | ether_type); | |
1254 | ||
1255 | ||
1256 | spin_lock_irqsave(&priv->lock, flags); | |
1257 | if (!skb->protocol) { | |
1258 | priv->stats.rx_errors++; | |
1259 | priv->stats.rx_dropped++; | |
1260 | dev_kfree_skb_any(skb); | |
1261 | goto bad_proto; | |
1262 | } | |
1263 | ||
1264 | if (netif_rx(skb) == NET_RX_DROP) { | |
1265 | priv->stats.rx_errors++; | |
1266 | priv->stats.rx_dropped++; | |
1267 | goto bad_proto; | |
1268 | } | |
1269 | ||
1270 | /* Statistics */ | |
1271 | priv->stats.rx_packets++; | |
1272 | priv->stats.rx_bytes += skb->len; | |
1273 | ||
1274 | bad_proto: | |
1275 | if (netif_queue_stopped(dev)) | |
1276 | netif_wake_queue(dev); | |
1277 | spin_unlock_irqrestore(&priv->lock, flags); | |
1278 | ||
1279 | dev->last_rx = jiffies; | |
1280 | ||
1281 | return 0; | |
1282 | } | |
1283 | ||
1284 | static int ether1394_write(struct hpsb_host *host, int srcid, int destid, | |
1285 | quadlet_t *data, u64 addr, size_t len, u16 flags) | |
1286 | { | |
1287 | struct eth1394_host_info *hi; | |
1288 | ||
1289 | hi = hpsb_get_hostinfo(ð1394_highlevel, host); | |
1290 | if (hi == NULL) { | |
1291 | ETH1394_PRINT_G(KERN_ERR, "Could not find net device for host %s\n", | |
1292 | host->driver->name); | |
1293 | return RCODE_ADDRESS_ERROR; | |
1294 | } | |
1295 | ||
1296 | if (ether1394_data_handler(hi->dev, srcid, destid, (char*)data, len)) | |
1297 | return RCODE_ADDRESS_ERROR; | |
1298 | else | |
1299 | return RCODE_COMPLETE; | |
1300 | } | |
1301 | ||
1302 | static void ether1394_iso(struct hpsb_iso *iso) | |
1303 | { | |
1304 | quadlet_t *data; | |
1305 | char *buf; | |
1306 | struct eth1394_host_info *hi; | |
1307 | struct net_device *dev; | |
1308 | struct eth1394_priv *priv; | |
1309 | unsigned int len; | |
1310 | u32 specifier_id; | |
1311 | u16 source_id; | |
1312 | int i; | |
1313 | int nready; | |
1314 | ||
1315 | hi = hpsb_get_hostinfo(ð1394_highlevel, iso->host); | |
1316 | if (hi == NULL) { | |
1317 | ETH1394_PRINT_G(KERN_ERR, "Could not find net device for host %s\n", | |
1318 | iso->host->driver->name); | |
1319 | return; | |
1320 | } | |
1321 | ||
1322 | dev = hi->dev; | |
1323 | ||
1324 | nready = hpsb_iso_n_ready(iso); | |
1325 | for (i = 0; i < nready; i++) { | |
1326 | struct hpsb_iso_packet_info *info = | |
1327 | &iso->infos[(iso->first_packet + i) % iso->buf_packets]; | |
1328 | data = (quadlet_t*) (iso->data_buf.kvirt + info->offset); | |
1329 | ||
1330 | /* skip over GASP header */ | |
1331 | buf = (char *)data + 8; | |
1332 | len = info->len - 8; | |
1333 | ||
1334 | specifier_id = (((be32_to_cpu(data[0]) & 0xffff) << 8) | | |
1335 | ((be32_to_cpu(data[1]) & 0xff000000) >> 24)); | |
1336 | source_id = be32_to_cpu(data[0]) >> 16; | |
1337 | ||
1338 | priv = netdev_priv(dev); | |
1339 | ||
1340 | if (info->channel != (iso->host->csr.broadcast_channel & 0x3f) || | |
1341 | specifier_id != ETHER1394_GASP_SPECIFIER_ID) { | |
1342 | /* This packet is not for us */ | |
1343 | continue; | |
1344 | } | |
1345 | ether1394_data_handler(dev, source_id, LOCAL_BUS | ALL_NODES, | |
1346 | buf, len); | |
1347 | } | |
1348 | ||
1349 | hpsb_iso_recv_release_packets(iso, i); | |
1350 | ||
1351 | dev->last_rx = jiffies; | |
1352 | } | |
1353 | ||
1354 | /****************************************** | |
1355 | * Datagram transmission code | |
1356 | ******************************************/ | |
1357 | ||
1358 | /* Convert a standard ARP packet to 1394 ARP. The first 8 bytes (the entire | |
1359 | * arphdr) is the same format as the ip1394 header, so they overlap. The rest | |
1360 | * needs to be munged a bit. The remainder of the arphdr is formatted based | |
1361 | * on hwaddr len and ipaddr len. We know what they'll be, so it's easy to | |
1362 | * judge. | |
1363 | * | |
1364 | * Now that the EUI is used for the hardware address all we need to do to make | |
1365 | * this work for 1394 is to insert 2 quadlets that contain max_rec size, | |
1366 | * speed, and unicast FIFO address information between the sender_unique_id | |
1367 | * and the IP addresses. | |
1368 | */ | |
1369 | static inline void ether1394_arp_to_1394arp(struct sk_buff *skb, | |
1370 | struct net_device *dev) | |
1371 | { | |
1372 | struct eth1394_priv *priv = netdev_priv(dev); | |
1373 | ||
1374 | struct arphdr *arp = (struct arphdr *)skb->data; | |
1375 | unsigned char *arp_ptr = (unsigned char *)(arp + 1); | |
1376 | struct eth1394_arp *arp1394 = (struct eth1394_arp *)skb->data; | |
1377 | ||
1378 | /* Believe it or not, all that need to happen is sender IP get moved | |
1379 | * and set hw_addr_len, max_rec, sspd, fifo_hi and fifo_lo. */ | |
1380 | arp1394->hw_addr_len = 16; | |
1381 | arp1394->sip = *(u32*)(arp_ptr + ETH1394_ALEN); | |
1382 | arp1394->max_rec = priv->host->csr.max_rec; | |
1383 | arp1394->sspd = priv->host->csr.lnk_spd; | |
1384 | arp1394->fifo_hi = htons (priv->local_fifo >> 32); | |
1385 | arp1394->fifo_lo = htonl (priv->local_fifo & ~0x0); | |
1386 | ||
1387 | return; | |
1388 | } | |
1389 | ||
1390 | /* We need to encapsulate the standard header with our own. We use the | |
1391 | * ethernet header's proto for our own. */ | |
1392 | static inline unsigned int ether1394_encapsulate_prep(unsigned int max_payload, | |
02f4213f | 1393 | __be16 proto, |
1da177e4 LT |
1394 | union eth1394_hdr *hdr, |
1395 | u16 dg_size, u16 dgl) | |
1396 | { | |
1397 | unsigned int adj_max_payload = max_payload - hdr_type_len[ETH1394_HDR_LF_UF]; | |
1398 | ||
1399 | /* Does it all fit in one packet? */ | |
1400 | if (dg_size <= adj_max_payload) { | |
1401 | hdr->uf.lf = ETH1394_HDR_LF_UF; | |
1402 | hdr->uf.ether_type = proto; | |
1403 | } else { | |
1404 | hdr->ff.lf = ETH1394_HDR_LF_FF; | |
1405 | hdr->ff.ether_type = proto; | |
1406 | hdr->ff.dg_size = dg_size - 1; | |
1407 | hdr->ff.dgl = dgl; | |
1408 | adj_max_payload = max_payload - hdr_type_len[ETH1394_HDR_LF_FF]; | |
1409 | } | |
1410 | return((dg_size + (adj_max_payload - 1)) / adj_max_payload); | |
1411 | } | |
1412 | ||
1413 | static inline unsigned int ether1394_encapsulate(struct sk_buff *skb, | |
1414 | unsigned int max_payload, | |
1415 | union eth1394_hdr *hdr) | |
1416 | { | |
1417 | union eth1394_hdr *bufhdr; | |
1418 | int ftype = hdr->common.lf; | |
1419 | int hdrsz = hdr_type_len[ftype]; | |
1420 | unsigned int adj_max_payload = max_payload - hdrsz; | |
1421 | ||
1422 | switch(ftype) { | |
1423 | case ETH1394_HDR_LF_UF: | |
1424 | bufhdr = (union eth1394_hdr *)skb_push(skb, hdrsz); | |
1425 | bufhdr->words.word1 = htons(hdr->words.word1); | |
1426 | bufhdr->words.word2 = hdr->words.word2; | |
1427 | break; | |
1428 | ||
1429 | case ETH1394_HDR_LF_FF: | |
1430 | bufhdr = (union eth1394_hdr *)skb_push(skb, hdrsz); | |
1431 | bufhdr->words.word1 = htons(hdr->words.word1); | |
1432 | bufhdr->words.word2 = hdr->words.word2; | |
1433 | bufhdr->words.word3 = htons(hdr->words.word3); | |
1434 | bufhdr->words.word4 = 0; | |
1435 | ||
1436 | /* Set frag type here for future interior fragments */ | |
1437 | hdr->common.lf = ETH1394_HDR_LF_IF; | |
1438 | hdr->sf.fg_off = 0; | |
1439 | break; | |
1440 | ||
1441 | default: | |
1442 | hdr->sf.fg_off += adj_max_payload; | |
1443 | bufhdr = (union eth1394_hdr *)skb_pull(skb, adj_max_payload); | |
1444 | if (max_payload >= skb->len) | |
1445 | hdr->common.lf = ETH1394_HDR_LF_LF; | |
1446 | bufhdr->words.word1 = htons(hdr->words.word1); | |
1447 | bufhdr->words.word2 = htons(hdr->words.word2); | |
1448 | bufhdr->words.word3 = htons(hdr->words.word3); | |
1449 | bufhdr->words.word4 = 0; | |
1450 | } | |
1451 | ||
1452 | return min(max_payload, skb->len); | |
1453 | } | |
1454 | ||
1455 | static inline struct hpsb_packet *ether1394_alloc_common_packet(struct hpsb_host *host) | |
1456 | { | |
1457 | struct hpsb_packet *p; | |
1458 | ||
1459 | p = hpsb_alloc_packet(0); | |
1460 | if (p) { | |
1461 | p->host = host; | |
1462 | p->generation = get_hpsb_generation(host); | |
1463 | p->type = hpsb_async; | |
1464 | } | |
1465 | return p; | |
1466 | } | |
1467 | ||
1468 | static inline int ether1394_prep_write_packet(struct hpsb_packet *p, | |
1469 | struct hpsb_host *host, | |
1470 | nodeid_t node, u64 addr, | |
1471 | void * data, int tx_len) | |
1472 | { | |
1473 | p->node_id = node; | |
1474 | p->data = NULL; | |
1475 | ||
1476 | p->tcode = TCODE_WRITEB; | |
1477 | p->header[1] = (host->node_id << 16) | (addr >> 32); | |
1478 | p->header[2] = addr & 0xffffffff; | |
1479 | ||
1480 | p->header_size = 16; | |
1481 | p->expect_response = 1; | |
1482 | ||
1483 | if (hpsb_get_tlabel(p)) { | |
1484 | ETH1394_PRINT_G(KERN_ERR, "No more tlabels left while sending " | |
1485 | "to node " NODE_BUS_FMT "\n", NODE_BUS_ARGS(host, node)); | |
1486 | return -1; | |
1487 | } | |
1488 | p->header[0] = (p->node_id << 16) | (p->tlabel << 10) | |
1489 | | (1 << 8) | (TCODE_WRITEB << 4); | |
1490 | ||
1491 | p->header[3] = tx_len << 16; | |
1492 | p->data_size = (tx_len + 3) & ~3; | |
1493 | p->data = (quadlet_t*)data; | |
1494 | ||
1495 | return 0; | |
1496 | } | |
1497 | ||
1498 | static inline void ether1394_prep_gasp_packet(struct hpsb_packet *p, | |
1499 | struct eth1394_priv *priv, | |
1500 | struct sk_buff *skb, int length) | |
1501 | { | |
1502 | p->header_size = 4; | |
1503 | p->tcode = TCODE_STREAM_DATA; | |
1504 | ||
1505 | p->header[0] = (length << 16) | (3 << 14) | |
1506 | | ((priv->broadcast_channel) << 8) | |
1507 | | (TCODE_STREAM_DATA << 4); | |
1508 | p->data_size = length; | |
1509 | p->data = ((quadlet_t*)skb->data) - 2; | |
1510 | p->data[0] = cpu_to_be32((priv->host->node_id << 16) | | |
1511 | ETHER1394_GASP_SPECIFIER_ID_HI); | |
7136b807 BC |
1512 | p->data[1] = cpu_to_be32((ETHER1394_GASP_SPECIFIER_ID_LO << 24) | |
1513 | ETHER1394_GASP_VERSION); | |
1da177e4 LT |
1514 | |
1515 | /* Setting the node id to ALL_NODES (not LOCAL_BUS | ALL_NODES) | |
1516 | * prevents hpsb_send_packet() from setting the speed to an arbitrary | |
1517 | * value based on packet->node_id if packet->node_id is not set. */ | |
1518 | p->node_id = ALL_NODES; | |
1519 | p->speed_code = priv->bc_sspd; | |
1520 | } | |
1521 | ||
1522 | static inline void ether1394_free_packet(struct hpsb_packet *packet) | |
1523 | { | |
1524 | if (packet->tcode != TCODE_STREAM_DATA) | |
1525 | hpsb_free_tlabel(packet); | |
1526 | hpsb_free_packet(packet); | |
1527 | } | |
1528 | ||
1529 | static void ether1394_complete_cb(void *__ptask); | |
1530 | ||
1531 | static int ether1394_send_packet(struct packet_task *ptask, unsigned int tx_len) | |
1532 | { | |
1533 | struct eth1394_priv *priv = ptask->priv; | |
1534 | struct hpsb_packet *packet = NULL; | |
1535 | ||
1536 | packet = ether1394_alloc_common_packet(priv->host); | |
1537 | if (!packet) | |
1538 | return -1; | |
1539 | ||
1540 | if (ptask->tx_type == ETH1394_GASP) { | |
1541 | int length = tx_len + (2 * sizeof(quadlet_t)); | |
1542 | ||
1543 | ether1394_prep_gasp_packet(packet, priv, ptask->skb, length); | |
1544 | } else if (ether1394_prep_write_packet(packet, priv->host, | |
1545 | ptask->dest_node, | |
1546 | ptask->addr, ptask->skb->data, | |
1547 | tx_len)) { | |
1548 | hpsb_free_packet(packet); | |
1549 | return -1; | |
1550 | } | |
1551 | ||
1552 | ptask->packet = packet; | |
1553 | hpsb_set_packet_complete_task(ptask->packet, ether1394_complete_cb, | |
1554 | ptask); | |
1555 | ||
1556 | if (hpsb_send_packet(packet) < 0) { | |
1557 | ether1394_free_packet(packet); | |
1558 | return -1; | |
1559 | } | |
1560 | ||
1561 | return 0; | |
1562 | } | |
1563 | ||
1564 | ||
1565 | /* Task function to be run when a datagram transmission is completed */ | |
1566 | static inline void ether1394_dg_complete(struct packet_task *ptask, int fail) | |
1567 | { | |
1568 | struct sk_buff *skb = ptask->skb; | |
1569 | struct net_device *dev = skb->dev; | |
1570 | struct eth1394_priv *priv = netdev_priv(dev); | |
1571 | unsigned long flags; | |
1572 | ||
1573 | /* Statistics */ | |
1574 | spin_lock_irqsave(&priv->lock, flags); | |
1575 | if (fail) { | |
1576 | priv->stats.tx_dropped++; | |
1577 | priv->stats.tx_errors++; | |
1578 | } else { | |
1579 | priv->stats.tx_bytes += skb->len; | |
1580 | priv->stats.tx_packets++; | |
1581 | } | |
1582 | spin_unlock_irqrestore(&priv->lock, flags); | |
1583 | ||
1584 | dev_kfree_skb_any(skb); | |
1585 | kmem_cache_free(packet_task_cache, ptask); | |
1586 | } | |
1587 | ||
1588 | ||
1589 | /* Callback for when a packet has been sent and the status of that packet is | |
1590 | * known */ | |
1591 | static void ether1394_complete_cb(void *__ptask) | |
1592 | { | |
1593 | struct packet_task *ptask = (struct packet_task *)__ptask; | |
1594 | struct hpsb_packet *packet = ptask->packet; | |
1595 | int fail = 0; | |
1596 | ||
1597 | if (packet->tcode != TCODE_STREAM_DATA) | |
1598 | fail = hpsb_packet_success(packet); | |
1599 | ||
1600 | ether1394_free_packet(packet); | |
1601 | ||
1602 | ptask->outstanding_pkts--; | |
1603 | if (ptask->outstanding_pkts > 0 && !fail) { | |
1604 | int tx_len; | |
1605 | ||
1606 | /* Add the encapsulation header to the fragment */ | |
1607 | tx_len = ether1394_encapsulate(ptask->skb, ptask->max_payload, | |
1608 | &ptask->hdr); | |
1609 | if (ether1394_send_packet(ptask, tx_len)) | |
1610 | ether1394_dg_complete(ptask, 1); | |
1611 | } else { | |
1612 | ether1394_dg_complete(ptask, fail); | |
1613 | } | |
1614 | } | |
1615 | ||
1616 | ||
1617 | ||
1618 | /* Transmit a packet (called by kernel) */ | |
1619 | static int ether1394_tx (struct sk_buff *skb, struct net_device *dev) | |
1620 | { | |
b4e3ca1a | 1621 | gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; |
1da177e4 LT |
1622 | struct eth1394hdr *eth; |
1623 | struct eth1394_priv *priv = netdev_priv(dev); | |
02f4213f | 1624 | __be16 proto; |
1da177e4 LT |
1625 | unsigned long flags; |
1626 | nodeid_t dest_node; | |
1627 | eth1394_tx_type tx_type; | |
1628 | int ret = 0; | |
1629 | unsigned int tx_len; | |
1630 | unsigned int max_payload; | |
1631 | u16 dg_size; | |
1632 | u16 dgl; | |
1633 | struct packet_task *ptask; | |
1634 | struct eth1394_node_ref *node; | |
1635 | struct eth1394_node_info *node_info = NULL; | |
1636 | ||
1637 | ptask = kmem_cache_alloc(packet_task_cache, kmflags); | |
1638 | if (ptask == NULL) { | |
1639 | ret = -ENOMEM; | |
1640 | goto fail; | |
1641 | } | |
1642 | ||
1643 | /* XXX Ignore this for now. Noticed that when MacOSX is the IRM, | |
1644 | * it does not set our validity bit. We need to compensate for | |
1645 | * that somewhere else, but not in eth1394. */ | |
1646 | #if 0 | |
1647 | if ((priv->host->csr.broadcast_channel & 0xc0000000) != 0xc0000000) { | |
1648 | ret = -EAGAIN; | |
1649 | goto fail; | |
1650 | } | |
1651 | #endif | |
1652 | ||
1653 | if ((skb = skb_share_check (skb, kmflags)) == NULL) { | |
1654 | ret = -ENOMEM; | |
1655 | goto fail; | |
1656 | } | |
1657 | ||
1658 | /* Get rid of the fake eth1394 header, but save a pointer */ | |
1659 | eth = (struct eth1394hdr*)skb->data; | |
1660 | skb_pull(skb, ETH1394_HLEN); | |
1661 | ||
1662 | proto = eth->h_proto; | |
1663 | dg_size = skb->len; | |
1664 | ||
1665 | /* Set the transmission type for the packet. ARP packets and IP | |
1666 | * broadcast packets are sent via GASP. */ | |
1667 | if (memcmp(eth->h_dest, dev->broadcast, ETH1394_ALEN) == 0 || | |
7136b807 BC |
1668 | proto == htons(ETH_P_ARP) || |
1669 | (proto == htons(ETH_P_IP) && | |
1670 | IN_MULTICAST(ntohl(skb->nh.iph->daddr)))) { | |
1da177e4 LT |
1671 | tx_type = ETH1394_GASP; |
1672 | dest_node = LOCAL_BUS | ALL_NODES; | |
1673 | max_payload = priv->bc_maxpayload - ETHER1394_GASP_OVERHEAD; | |
1674 | BUG_ON(max_payload < (512 - ETHER1394_GASP_OVERHEAD)); | |
1675 | dgl = priv->bc_dgl; | |
1676 | if (max_payload < dg_size + hdr_type_len[ETH1394_HDR_LF_UF]) | |
1677 | priv->bc_dgl++; | |
1678 | } else { | |
1679 | node = eth1394_find_node_guid(&priv->ip_node_list, | |
1680 | be64_to_cpu(*(u64*)eth->h_dest)); | |
1681 | if (!node) { | |
1682 | ret = -EAGAIN; | |
1683 | goto fail; | |
1684 | } | |
1685 | node_info = (struct eth1394_node_info*)node->ud->device.driver_data; | |
6737231e | 1686 | if (node_info->fifo == CSR1212_INVALID_ADDR_SPACE) { |
1da177e4 LT |
1687 | ret = -EAGAIN; |
1688 | goto fail; | |
1689 | } | |
1690 | ||
1691 | dest_node = node->ud->ne->nodeid; | |
1692 | max_payload = node_info->maxpayload; | |
1693 | BUG_ON(max_payload < (512 - ETHER1394_GASP_OVERHEAD)); | |
1694 | ||
1695 | dgl = node_info->dgl; | |
1696 | if (max_payload < dg_size + hdr_type_len[ETH1394_HDR_LF_UF]) | |
1697 | node_info->dgl++; | |
1698 | tx_type = ETH1394_WRREQ; | |
1699 | } | |
1700 | ||
1701 | /* If this is an ARP packet, convert it */ | |
7136b807 | 1702 | if (proto == htons(ETH_P_ARP)) |
1da177e4 LT |
1703 | ether1394_arp_to_1394arp (skb, dev); |
1704 | ||
1705 | ptask->hdr.words.word1 = 0; | |
1706 | ptask->hdr.words.word2 = 0; | |
1707 | ptask->hdr.words.word3 = 0; | |
1708 | ptask->hdr.words.word4 = 0; | |
1709 | ptask->skb = skb; | |
1710 | ptask->priv = priv; | |
1711 | ptask->tx_type = tx_type; | |
1712 | ||
1713 | if (tx_type != ETH1394_GASP) { | |
1714 | u64 addr; | |
1715 | ||
1716 | spin_lock_irqsave(&priv->lock, flags); | |
1717 | addr = node_info->fifo; | |
1718 | spin_unlock_irqrestore(&priv->lock, flags); | |
1719 | ||
1720 | ptask->addr = addr; | |
1721 | ptask->dest_node = dest_node; | |
1722 | } | |
1723 | ||
1724 | ptask->tx_type = tx_type; | |
1725 | ptask->max_payload = max_payload; | |
1726 | ptask->outstanding_pkts = ether1394_encapsulate_prep(max_payload, proto, | |
1727 | &ptask->hdr, dg_size, | |
1728 | dgl); | |
1729 | ||
1730 | /* Add the encapsulation header to the fragment */ | |
1731 | tx_len = ether1394_encapsulate(skb, max_payload, &ptask->hdr); | |
1732 | dev->trans_start = jiffies; | |
1733 | if (ether1394_send_packet(ptask, tx_len)) | |
1734 | goto fail; | |
1735 | ||
1736 | netif_wake_queue(dev); | |
1737 | return 0; | |
1738 | fail: | |
1739 | if (ptask) | |
1740 | kmem_cache_free(packet_task_cache, ptask); | |
1741 | ||
1742 | if (skb != NULL) | |
1743 | dev_kfree_skb(skb); | |
1744 | ||
1745 | spin_lock_irqsave (&priv->lock, flags); | |
1746 | priv->stats.tx_dropped++; | |
1747 | priv->stats.tx_errors++; | |
1748 | spin_unlock_irqrestore (&priv->lock, flags); | |
1749 | ||
1750 | if (netif_queue_stopped(dev)) | |
1751 | netif_wake_queue(dev); | |
1752 | ||
1753 | return 0; /* returning non-zero causes serious problems */ | |
1754 | } | |
1755 | ||
1756 | static void ether1394_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
1757 | { | |
1758 | strcpy (info->driver, driver_name); | |
1da177e4 LT |
1759 | /* FIXME XXX provide sane businfo */ |
1760 | strcpy (info->bus_info, "ieee1394"); | |
1761 | } | |
1762 | ||
1763 | static struct ethtool_ops ethtool_ops = { | |
1764 | .get_drvinfo = ether1394_get_drvinfo | |
1765 | }; | |
1766 | ||
1767 | static int __init ether1394_init_module (void) | |
1768 | { | |
1769 | packet_task_cache = kmem_cache_create("packet_task", sizeof(struct packet_task), | |
1770 | 0, 0, NULL, NULL); | |
1771 | ||
1772 | /* Register ourselves as a highlevel driver */ | |
1773 | hpsb_register_highlevel(ð1394_highlevel); | |
1774 | ||
1775 | return hpsb_register_protocol(ð1394_proto_driver); | |
1776 | } | |
1777 | ||
1778 | static void __exit ether1394_exit_module (void) | |
1779 | { | |
1780 | hpsb_unregister_protocol(ð1394_proto_driver); | |
1781 | hpsb_unregister_highlevel(ð1394_highlevel); | |
1782 | kmem_cache_destroy(packet_task_cache); | |
1783 | } | |
1784 | ||
1785 | module_init(ether1394_init_module); | |
1786 | module_exit(ether1394_exit_module); |