Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * Copyright (C) 1996-2001 Linus Torvalds & author (see below) |
3 | */ | |
4 | ||
5 | /* | |
6 | * Version 0.03 Cleaned auto-tune, added probe | |
7 | * Version 0.04 Added second channel tuning | |
8 | * Version 0.05 Enhanced tuning ; added qd6500 support | |
9 | * Version 0.06 Added dos driver's list | |
10 | * Version 0.07 Second channel bug fix | |
11 | * | |
12 | * QDI QD6500/QD6580 EIDE controller fast support | |
13 | * | |
14 | * Please set local bus speed using kernel parameter idebus | |
15 | * for example, "idebus=33" stands for 33Mhz VLbus | |
16 | * To activate controller support, use "ide0=qd65xx" | |
b6209a90 BZ |
17 | * To enable tuning, use "hda=autotune hdb=autotune" |
18 | * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune" | |
1da177e4 LT |
19 | */ |
20 | ||
21 | /* | |
22 | * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by | |
23 | * Samuel Thibault <samuel.thibault@fnac.net> | |
24 | */ | |
25 | ||
1da177e4 | 26 | #include <linux/module.h> |
1da177e4 LT |
27 | #include <linux/types.h> |
28 | #include <linux/kernel.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/timer.h> | |
31 | #include <linux/mm.h> | |
32 | #include <linux/ioport.h> | |
33 | #include <linux/blkdev.h> | |
34 | #include <linux/hdreg.h> | |
35 | #include <linux/ide.h> | |
36 | #include <linux/init.h> | |
37 | #include <asm/system.h> | |
38 | #include <asm/io.h> | |
39 | ||
d92f1a28 BZ |
40 | #define DRV_NAME "qd65xx" |
41 | ||
1da177e4 LT |
42 | #include "qd65xx.h" |
43 | ||
44 | /* | |
45 | * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580) | |
46 | * or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580) | |
47 | * -- qd6500 is a single IDE interface | |
48 | * -- qd6580 is a dual IDE interface | |
49 | * | |
50 | * More research on qd6580 being done by willmore@cig.mot.com (David) | |
51 | * More Information given by Petr Soucek (petr@ryston.cz) | |
52 | * http://www.ryston.cz/petr/vlb | |
53 | */ | |
54 | ||
55 | /* | |
56 | * base: Timer1 | |
57 | * | |
58 | * | |
59 | * base+0x01: Config (R/O) | |
60 | * | |
61 | * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500) | |
62 | * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30 | |
63 | * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz | |
64 | * bit 3: qd6500: 1 = disabled, 0 = enabled | |
65 | * qd6580: 1 | |
66 | * upper nibble: | |
67 | * qd6500: 1100 | |
68 | * qd6580: either 1010 or 0101 | |
69 | * | |
70 | * | |
71 | * base+0x02: Timer2 (qd6580 only) | |
72 | * | |
73 | * | |
74 | * base+0x03: Control (qd6580 only) | |
75 | * | |
76 | * bits 0-3 must always be set 1 | |
77 | * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock | |
78 | * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb | |
79 | * 0 = Primary and Secondary ports enabled : channel 0 for hda & hdb | |
80 | * channel 1 for hdc & hdd | |
81 | * bit 1 : 1 = only disks on primary port | |
82 | * 0 = disks & ATAPI devices on primary port | |
83 | * bit 2-4 : always 0 | |
84 | * bit 5 : status, but of what ? | |
85 | * bit 6 : always set 1 by dos driver | |
86 | * bit 7 : set 1 for non-ATAPI devices on primary port | |
87 | * (maybe read-ahead and post-write buffer ?) | |
88 | */ | |
89 | ||
90 | static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */ | |
91 | ||
1da177e4 | 92 | /* |
d07616f1 | 93 | * qd65xx_select: |
1da177e4 | 94 | * |
d07616f1 | 95 | * This routine is invoked to prepare for access to a given drive. |
1da177e4 LT |
96 | */ |
97 | ||
d07616f1 | 98 | static void qd65xx_select(ide_drive_t *drive) |
1da177e4 LT |
99 | { |
100 | u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) | | |
101 | (QD_TIMREG(drive) & 0x02); | |
102 | ||
103 | if (timings[index] != QD_TIMING(drive)) | |
c196567a | 104 | outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive)); |
1da177e4 LT |
105 | } |
106 | ||
107 | /* | |
108 | * qd6500_compute_timing | |
109 | * | |
110 | * computes the timing value where | |
111 | * lower nibble represents active time, in count of VLB clocks | |
112 | * upper nibble represents recovery time, in count of VLB clocks | |
113 | */ | |
114 | ||
115 | static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) | |
116 | { | |
117 | u8 active_cycle,recovery_cycle; | |
118 | ||
119 | if (system_bus_clock()<=33) { | |
120 | active_cycle = 9 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 9); | |
121 | recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 0, 15); | |
122 | } else { | |
123 | active_cycle = 8 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 1, 8); | |
124 | recovery_cycle = 18 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 3, 18); | |
125 | } | |
126 | ||
127 | return((recovery_cycle<<4) | 0x08 | active_cycle); | |
128 | } | |
129 | ||
130 | /* | |
131 | * qd6580_compute_timing | |
132 | * | |
133 | * idem for qd6580 | |
134 | */ | |
135 | ||
136 | static u8 qd6580_compute_timing (int active_time, int recovery_time) | |
137 | { | |
138 | u8 active_cycle = 17 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 17); | |
139 | u8 recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 2, 15); | |
140 | ||
141 | return((recovery_cycle<<4) | active_cycle); | |
142 | } | |
143 | ||
144 | /* | |
145 | * qd_find_disk_type | |
146 | * | |
147 | * tries to find timing from dos driver's table | |
148 | */ | |
149 | ||
150 | static int qd_find_disk_type (ide_drive_t *drive, | |
151 | int *active_time, int *recovery_time) | |
152 | { | |
153 | struct qd65xx_timing_s *p; | |
154 | char model[40]; | |
155 | ||
156 | if (!*drive->id->model) return 0; | |
157 | ||
158 | strncpy(model,drive->id->model,40); | |
159 | ide_fixstring(model,40,1); /* byte-swap */ | |
160 | ||
161 | for (p = qd65xx_timing ; p->offset != -1 ; p++) { | |
162 | if (!strncmp(p->model, model+p->offset, 4)) { | |
163 | printk(KERN_DEBUG "%s: listed !\n", drive->name); | |
164 | *active_time = p->active; | |
165 | *recovery_time = p->recovery; | |
166 | return 1; | |
167 | } | |
168 | } | |
169 | return 0; | |
170 | } | |
171 | ||
1da177e4 LT |
172 | /* |
173 | * qd_set_timing: | |
174 | * | |
d07616f1 | 175 | * records the timing |
1da177e4 LT |
176 | */ |
177 | ||
178 | static void qd_set_timing (ide_drive_t *drive, u8 timing) | |
179 | { | |
1da177e4 LT |
180 | drive->drive_data &= 0xff00; |
181 | drive->drive_data |= timing; | |
1da177e4 LT |
182 | |
183 | printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); | |
184 | } | |
185 | ||
26bcb879 | 186 | static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 LT |
187 | { |
188 | int active_time = 175; | |
189 | int recovery_time = 415; /* worst case values from the dos driver */ | |
190 | ||
26bcb879 BZ |
191 | /* |
192 | * FIXME: use "pio" value | |
193 | */ | |
1da177e4 LT |
194 | if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time) |
195 | && drive->id->tPIO && (drive->id->field_valid & 0x02) | |
196 | && drive->id->eide_pio >= 240) { | |
197 | ||
198 | printk(KERN_INFO "%s: PIO mode%d\n", drive->name, | |
199 | drive->id->tPIO); | |
200 | active_time = 110; | |
201 | recovery_time = drive->id->eide_pio - 120; | |
202 | } | |
203 | ||
204 | qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time)); | |
205 | } | |
206 | ||
26bcb879 | 207 | static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 | 208 | { |
79472b6e | 209 | ide_hwif_t *hwif = drive->hwif; |
7dd00083 | 210 | unsigned int cycle_time; |
1da177e4 LT |
211 | int active_time = 175; |
212 | int recovery_time = 415; /* worst case values from the dos driver */ | |
79472b6e | 213 | u8 base = (hwif->config_data & 0xff00) >> 8; |
1da177e4 LT |
214 | |
215 | if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) { | |
7dd00083 | 216 | cycle_time = ide_pio_cycle_time(drive, pio); |
1da177e4 LT |
217 | |
218 | switch (pio) { | |
219 | case 0: break; | |
220 | case 3: | |
7dd00083 | 221 | if (cycle_time >= 110) { |
1da177e4 | 222 | active_time = 86; |
7dd00083 | 223 | recovery_time = cycle_time - 102; |
1da177e4 LT |
224 | } else |
225 | printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); | |
226 | break; | |
227 | case 4: | |
7dd00083 | 228 | if (cycle_time >= 69) { |
1da177e4 | 229 | active_time = 70; |
7dd00083 | 230 | recovery_time = cycle_time - 61; |
1da177e4 LT |
231 | } else |
232 | printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); | |
233 | break; | |
234 | default: | |
7dd00083 | 235 | if (cycle_time >= 180) { |
1da177e4 | 236 | active_time = 110; |
7dd00083 | 237 | recovery_time = cycle_time - 120; |
1da177e4 LT |
238 | } else { |
239 | active_time = ide_pio_timings[pio].active_time; | |
7dd00083 | 240 | recovery_time = cycle_time - active_time; |
1da177e4 LT |
241 | } |
242 | } | |
243 | printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio); | |
244 | } | |
245 | ||
246 | if (!HWIF(drive)->channel && drive->media != ide_disk) { | |
c196567a | 247 | outb(0x5f, QD_CONTROL_PORT); |
1da177e4 LT |
248 | printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO " |
249 | "and post-write buffer on %s.\n", | |
250 | drive->name, HWIF(drive)->name); | |
251 | } | |
252 | ||
253 | qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time)); | |
254 | } | |
255 | ||
256 | /* | |
257 | * qd_testreg | |
258 | * | |
259 | * tests if the given port is a register | |
260 | */ | |
261 | ||
262 | static int __init qd_testreg(int port) | |
263 | { | |
1da177e4 | 264 | unsigned long flags; |
f949820d | 265 | u8 savereg, readreg; |
1da177e4 | 266 | |
c196567a | 267 | local_irq_save(flags); |
1da177e4 LT |
268 | savereg = inb_p(port); |
269 | outb_p(QD_TESTVAL, port); /* safe value */ | |
270 | readreg = inb_p(port); | |
271 | outb(savereg, port); | |
c196567a | 272 | local_irq_restore(flags); |
1da177e4 LT |
273 | |
274 | if (savereg == QD_TESTVAL) { | |
275 | printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n"); | |
276 | printk(KERN_ERR "Please contact maintainers to tell about your hardware\n"); | |
277 | printk(KERN_ERR "Assuming qd65xx is not present.\n"); | |
278 | return 1; | |
279 | } | |
280 | ||
281 | return (readreg != QD_TESTVAL); | |
282 | } | |
283 | ||
1f2cf8b0 BZ |
284 | static void __init qd6500_port_init_devs(ide_hwif_t *hwif) |
285 | { | |
79472b6e BZ |
286 | u8 base = (hwif->config_data & 0xff00) >> 8; |
287 | u8 config = QD_CONFIG(hwif); | |
1f2cf8b0 BZ |
288 | |
289 | hwif->drives[0].drive_data = QD6500_DEF_DATA; | |
290 | hwif->drives[1].drive_data = QD6500_DEF_DATA; | |
291 | } | |
292 | ||
293 | static void __init qd6580_port_init_devs(ide_hwif_t *hwif) | |
294 | { | |
295 | u16 t1, t2; | |
79472b6e BZ |
296 | u8 base = (hwif->config_data & 0xff00) >> 8; |
297 | u8 config = QD_CONFIG(hwif); | |
1f2cf8b0 | 298 | |
79472b6e | 299 | if (hwif->host_flags & IDE_HFLAG_SINGLE) { |
1f2cf8b0 BZ |
300 | t1 = QD6580_DEF_DATA; |
301 | t2 = QD6580_DEF_DATA2; | |
302 | } else | |
303 | t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; | |
304 | ||
305 | hwif->drives[0].drive_data = t1; | |
306 | hwif->drives[1].drive_data = t2; | |
1da177e4 LT |
307 | } |
308 | ||
ac95beed BZ |
309 | static const struct ide_port_ops qd6500_port_ops = { |
310 | .port_init_devs = qd6500_port_init_devs, | |
311 | .set_pio_mode = qd6500_set_pio_mode, | |
312 | .selectproc = qd65xx_select, | |
313 | }; | |
314 | ||
315 | static const struct ide_port_ops qd6580_port_ops = { | |
316 | .port_init_devs = qd6580_port_init_devs, | |
317 | .set_pio_mode = qd6580_set_pio_mode, | |
318 | .selectproc = qd65xx_select, | |
319 | }; | |
320 | ||
c413b9b9 | 321 | static const struct ide_port_info qd65xx_port_info __initdata = { |
d92f1a28 | 322 | .name = DRV_NAME, |
c413b9b9 BZ |
323 | .chipset = ide_qd65xx, |
324 | .host_flags = IDE_HFLAG_IO_32BIT | | |
325 | IDE_HFLAG_NO_DMA | | |
326 | IDE_HFLAG_NO_AUTOTUNE, | |
327 | .pio_mask = ATA_PIO4, | |
328 | }; | |
329 | ||
1da177e4 LT |
330 | /* |
331 | * qd_probe: | |
332 | * | |
333 | * looks at the specified baseport, and if qd found, registers & initialises it | |
334 | * return 1 if another qd may be probed | |
335 | */ | |
336 | ||
337 | static int __init qd_probe(int base) | |
338 | { | |
0bfeee7d | 339 | int rc; |
7a2199f3 | 340 | u8 config, unit, control; |
e277f91f | 341 | struct ide_port_info d = qd65xx_port_info; |
1da177e4 | 342 | |
c196567a | 343 | config = inb(QD_CONFIG_PORT); |
1da177e4 LT |
344 | |
345 | if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) ) | |
7daf66dd | 346 | return -ENODEV; |
1da177e4 LT |
347 | |
348 | unit = ! (config & QD_CONFIG_IDE_BASEPORT); | |
349 | ||
e277f91f BZ |
350 | if (unit) |
351 | d.host_flags |= IDE_HFLAG_QD_2ND_PORT; | |
352 | ||
7a2199f3 BZ |
353 | switch (config & 0xf0) { |
354 | case QD_CONFIG_QD6500: | |
7daf66dd BZ |
355 | if (qd_testreg(base)) |
356 | return -ENODEV; /* bad register */ | |
1da177e4 | 357 | |
1da177e4 LT |
358 | if (config & QD_CONFIG_DISABLED) { |
359 | printk(KERN_WARNING "qd6500 is disabled !\n"); | |
7daf66dd | 360 | return -ENODEV; |
1da177e4 LT |
361 | } |
362 | ||
e277f91f BZ |
363 | printk(KERN_NOTICE "qd6500 at %#x\n", base); |
364 | printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", | |
365 | config, QD_ID3); | |
366 | ||
ac95beed | 367 | d.port_ops = &qd6500_port_ops; |
79472b6e | 368 | d.host_flags |= IDE_HFLAG_SINGLE; |
7a2199f3 BZ |
369 | break; |
370 | case QD_CONFIG_QD6580_A: | |
371 | case QD_CONFIG_QD6580_B: | |
7daf66dd BZ |
372 | if (qd_testreg(base) || qd_testreg(base + 0x02)) |
373 | return -ENODEV; /* bad registers */ | |
1da177e4 | 374 | |
c196567a | 375 | control = inb(QD_CONTROL_PORT); |
1da177e4 LT |
376 | |
377 | printk(KERN_NOTICE "qd6580 at %#x\n", base); | |
378 | printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n", | |
379 | config, control, QD_ID3); | |
380 | ||
788d6697 BZ |
381 | outb(QD_DEF_CONTR, QD_CONTROL_PORT); |
382 | ||
ac95beed | 383 | d.port_ops = &qd6580_port_ops; |
7a2199f3 | 384 | if (control & QD_CONTR_SEC_DISABLED) |
79472b6e BZ |
385 | d.host_flags |= IDE_HFLAG_SINGLE; |
386 | ||
7a2199f3 BZ |
387 | printk(KERN_INFO "qd6580: %s IDE board\n", |
388 | (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual"); | |
389 | break; | |
390 | default: | |
391 | return -ENODEV; | |
392 | } | |
26bcb879 | 393 | |
7a2199f3 | 394 | rc = ide_legacy_device_add(&d, (base << 8) | config); |
e277f91f | 395 | |
7a2199f3 BZ |
396 | if (d.host_flags & IDE_HFLAG_SINGLE) |
397 | return (rc == 0) ? 1 : rc; | |
1da177e4 | 398 | |
7a2199f3 | 399 | return rc; |
1da177e4 LT |
400 | } |
401 | ||
84913882 BZ |
402 | int probe_qd65xx = 0; |
403 | ||
404 | module_param_named(probe, probe_qd65xx, bool, 0); | |
405 | MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); | |
406 | ||
ade2daf9 | 407 | static int __init qd65xx_init(void) |
1da177e4 | 408 | { |
7daf66dd BZ |
409 | int rc1, rc2 = -ENODEV; |
410 | ||
84913882 BZ |
411 | if (probe_qd65xx == 0) |
412 | return -ENODEV; | |
413 | ||
7daf66dd BZ |
414 | rc1 = qd_probe(0x30); |
415 | if (rc1) | |
416 | rc2 = qd_probe(0xb0); | |
417 | ||
418 | if (rc1 < 0 && rc2 < 0) | |
1da177e4 | 419 | return -ENODEV; |
7daf66dd | 420 | |
1da177e4 LT |
421 | return 0; |
422 | } | |
423 | ||
1da177e4 | 424 | module_init(qd65xx_init); |
1da177e4 LT |
425 | |
426 | MODULE_AUTHOR("Samuel Thibault"); | |
427 | MODULE_DESCRIPTION("support of qd65xx vlb ide chipset"); | |
428 | MODULE_LICENSE("GPL"); |