[linux-2.6-block.git] / drivers / ide / legacy / ide-cs.c

/*======================================================================

    A driver for PCMCIA IDE/ATA disk cards

    ide-cs.c 1.3 2002/10/26 05:45:31

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in
    which case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>

#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>

/*====================================================================*/

/* Module parameters */

MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
MODULE_LICENSE("Dual MPL/GPL");

#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)

#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif

/*====================================================================*/

static const char ide_major[] = {
    IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
    IDE4_MAJOR, IDE5_MAJOR
};

typedef struct ide_info_t {
    dev_link_t	link;
    int		ndev;
    dev_node_t	node;
    int		hd;
} ide_info_t;

static void ide_release(dev_link_t *);
static void ide_config(dev_link_t *);

static void ide_detach(struct pcmcia_device *p_dev);


/*======================================================================

    ide_attach() creates an "instance" of the driver, allocating
    local data structures for one device.  The device is registered
    with Card Services.

======================================================================*/

static int ide_attach(struct pcmcia_device *p_dev)
{
    ide_info_t *info;
    dev_link_t *link;

    DEBUG(0, "ide_attach()\n");

    /* Create new ide device */
    info = kzalloc(sizeof(*info), GFP_KERNEL);
    if (!info)
	return -ENOMEM;
    link = &info->link; link->priv = info;

    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
    link->io.IOAddrLines = 3;
    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
    link->conf.Attributes = CONF_ENABLE_IRQ;
    link->conf.Vcc = 50;
    link->conf.IntType = INT_MEMORY_AND_IO;

    link->handle = p_dev;
    p_dev->instance = link;

    link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
    ide_config(link);

    return 0;
} /* ide_attach */

/*======================================================================

    This deletes a driver "instance".  The device is de-registered
    with Card Services.  If it has been released, all local data
    structures are freed.  Otherwise, the structures will be freed
    when the device is released.

======================================================================*/

static void ide_detach(struct pcmcia_device *p_dev)
{
    dev_link_t *link = dev_to_instance(p_dev);

    DEBUG(0, "ide_detach(0x%p)\n", link);

    if (link->state & DEV_CONFIG)
	ide_release(link);

    kfree(link->priv);
} /* ide_detach */

static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
{
    hw_regs_t hw;
    memset(&hw, 0, sizeof(hw));
    ide_init_hwif_ports(&hw, io, ctl, NULL);
    hw.irq = irq;
    hw.chipset = ide_pci;
    hw.dev = &handle->dev;
    return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
}

/*======================================================================

    ide_config() is scheduled to run after a CARD_INSERTION event
    is received, to configure the PCMCIA socket, and to make the
    ide device available to the system.

======================================================================*/

#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)

static void ide_config(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    ide_info_t *info = link->priv;
    tuple_t tuple;
    struct {
	u_short		buf[128];
	cisparse_t	parse;
	config_info_t	conf;
	cistpl_cftable_entry_t dflt;
    } *stk = NULL;
    cistpl_cftable_entry_t *cfg;
    int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
    unsigned long io_base, ctl_base;

    DEBUG(0, "ide_config(0x%p)\n", link);

    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
    if (!stk) goto err_mem;
    cfg = &stk->parse.cftable_entry;

    tuple.TupleData = (cisdata_t *)&stk->buf;
    tuple.TupleOffset = 0;
    tuple.TupleDataMax = 255;
    tuple.Attributes = 0;
    tuple.DesiredTuple = CISTPL_CONFIG;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
    CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &stk->parse));
    link->conf.ConfigBase = stk->parse.config.base;
    link->conf.Present = stk->parse.config.rmask[0];

    tuple.DesiredTuple = CISTPL_MANFID;
    if (!pcmcia_get_first_tuple(handle, &tuple) &&
	!pcmcia_get_tuple_data(handle, &tuple) &&
	!pcmcia_parse_tuple(handle, &tuple, &stk->parse))
	is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
		  ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) ||
		   (stk->parse.manfid.card == PRODID_KME_KXLC005_B)));

    /* Configure card */
    link->state |= DEV_CONFIG;

    /* Not sure if this is right... look up the current Vcc */
    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));
    link->conf.Vcc = stk->conf.Vcc;

    pass = io_base = ctl_base = 0;
    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
    tuple.Attributes = 0;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    while (1) {
    	if (pcmcia_get_tuple_data(handle, &tuple) != 0) goto next_entry;
	if (pcmcia_parse_tuple(handle, &tuple, &stk->parse) != 0) goto next_entry;

	/* Check for matching Vcc, unless we're desperate */
	if (!pass) {
	    if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
		if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
		    goto next_entry;
	    } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
		if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
		    goto next_entry;
	    }
	}

	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
	    link->conf.Vpp1 = link->conf.Vpp2 =
		cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
	    link->conf.Vpp1 = link->conf.Vpp2 =
		stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;

	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
	    link->conf.ConfigIndex = cfg->index;
	    link->io.BasePort1 = io->win[0].base;
	    link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	    if (!(io->flags & CISTPL_IO_16BIT))
		link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	    if (io->nwin == 2) {
		link->io.NumPorts1 = 8;
		link->io.BasePort2 = io->win[1].base;
		link->io.NumPorts2 = (is_kme) ? 2 : 1;
		if (pcmcia_request_io(link->handle, &link->io) != 0)
			goto next_entry;
		io_base = link->io.BasePort1;
		ctl_base = link->io.BasePort2;
	    } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
		link->io.NumPorts1 = io->win[0].len;
		link->io.NumPorts2 = 0;
		if (pcmcia_request_io(link->handle, &link->io) != 0)
			goto next_entry;
		io_base = link->io.BasePort1;
		ctl_base = link->io.BasePort1 + 0x0e;
	    } else goto next_entry;
	    /* If we've got this far, we're done */
	    break;
	}

    next_entry:
	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
	    memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
	if (pass) {
	    CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
	} else if (pcmcia_get_next_tuple(handle, &tuple) != 0) {
	    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	    memset(&stk->dflt, 0, sizeof(stk->dflt));
	    pass++;
	}
    }

    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));

    /* disable drive interrupts during IDE probe */
    outb(0x02, ctl_base);

    /* special setup for KXLC005 card */
    if (is_kme)
	outb(0x81, ctl_base+1);

    /* retry registration in case device is still spinning up */
    for (hd = -1, i = 0; i < 10; i++) {
	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
	if (hd >= 0) break;
	if (link->io.NumPorts1 == 0x20) {
	    outb(0x02, ctl_base + 0x10);
	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
				link->irq.AssignedIRQ, handle);
	    if (hd >= 0) {
		io_base += 0x10;
		ctl_base += 0x10;
		break;
	    }
	}
	msleep(100);
    }

    if (hd < 0) {
	printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
	       ", irq %u failed\n", io_base, ctl_base,
	       link->irq.AssignedIRQ);
	goto failed;
    }

    info->ndev = 1;
    sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
    info->node.major = ide_major[hd];
    info->node.minor = 0;
    info->hd = hd;
    link->dev = &info->node;
    printk(KERN_INFO "ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",
	   info->node.dev_name, link->conf.Vcc / 10, link->conf.Vcc % 10,
	   link->conf.Vpp1 / 10, link->conf.Vpp1 % 10);

    link->state &= ~DEV_CONFIG_PENDING;
    kfree(stk);
    return;

err_mem:
    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
    goto failed;

cs_failed:
    cs_error(link->handle, last_fn, last_ret);
failed:
    kfree(stk);
    ide_release(link);
    link->state &= ~DEV_CONFIG_PENDING;
} /* ide_config */

/*======================================================================

    After a card is removed, ide_release() will unregister the net
    device, and release the PCMCIA configuration.  If the device is
    still open, this will be postponed until it is closed.
    
======================================================================*/

void ide_release(dev_link_t *link)
{
    ide_info_t *info = link->priv;
    
    DEBUG(0, "ide_release(0x%p)\n", link);

    if (info->ndev) {
	/* FIXME: if this fails we need to queue the cleanup somehow
	   -- need to investigate the required PCMCIA magic */
	ide_unregister(info->hd);
    }
    info->ndev = 0;
    link->dev = NULL;
    
    pcmcia_release_configuration(link->handle);
    pcmcia_release_io(link->handle, &link->io);
    pcmcia_release_irq(link->handle, &link->irq);
    
    link->state &= ~DEV_CONFIG;

} /* ide_release */

static int ide_suspend(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);

	link->state |= DEV_SUSPEND;
	if (link->state & DEV_CONFIG)
		pcmcia_release_configuration(link->handle);

	return 0;
}

static int ide_resume(struct pcmcia_device *dev)
{
	dev_link_t *link = dev_to_instance(dev);

	link->state &= ~DEV_SUSPEND;
	if (DEV_OK(link))
		pcmcia_request_configuration(link->handle, &link->conf);

	return 0;
}

/*======================================================================

    The card status event handler.  Mostly, this schedules other
    stuff to run after an event is received.  A CARD_REMOVAL event
    also sets some flags to discourage the ide drivers from
    talking to the ports.
    
======================================================================*/

static struct pcmcia_device_id ide_ids[] = {
	PCMCIA_DEVICE_FUNC_ID(4),
	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
 	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */
	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, ide_ids);

static struct pcmcia_driver ide_cs_driver = {
	.owner		= THIS_MODULE,
	.drv		= {
		.name	= "ide-cs",
	},
	.probe		= ide_attach,
	.remove		= ide_detach,
	.id_table       = ide_ids,
	.suspend	= ide_suspend,
	.resume		= ide_resume,
};

static int __init init_ide_cs(void)
{
	return pcmcia_register_driver(&ide_cs_driver);
}

static void __exit exit_ide_cs(void)
{
	pcmcia_unregister_driver(&ide_cs_driver);
}

late_initcall(init_ide_cs);
module_exit(exit_ide_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for PCMCIA IDE/ATA disk cards
	4
	5	ide-cs.c 1.3 2002/10/26 05:45:31
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in
	23	which case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/kernel.h>
	36	#include <linux/init.h>
	37	#include <linux/sched.h>
	38	#include <linux/ptrace.h>
	39	#include <linux/slab.h>
	40	#include <linux/string.h>
	41	#include <linux/timer.h>
	42	#include <linux/ioport.h>
	43	#include <linux/ide.h>
	44	#include <linux/hdreg.h>
	45	#include <linux/major.h>
2aad5f03	46	#include <linux/delay.h>
1da177e4 LT	47	#include <asm/io.h>
	48	#include <asm/system.h>
	49
1da177e4 LT	50	#include <pcmcia/cs_types.h>
	51	#include <pcmcia/cs.h>
	52	#include <pcmcia/cistpl.h>
	53	#include <pcmcia/ds.h>
	54	#include <pcmcia/cisreg.h>
	55	#include <pcmcia/ciscode.h>
	56
	57	/====================================================================/
	58
	59	/* Module parameters */
	60
	61	MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
	62	MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
	63	MODULE_LICENSE("Dual MPL/GPL");
	64
	65	#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
	66
	67	#ifdef PCMCIA_DEBUG
	68	INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
	69	#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
	70	static char *version =
	71	"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
	72	#else
	73	#define DEBUG(n, args...)
	74	#endif
	75
	76	/====================================================================/
	77
	78	static const char ide_major[] = {
	79	IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
	80	IDE4_MAJOR, IDE5_MAJOR
	81	};
	82
	83	typedef struct ide_info_t {
	84	dev_link_t link;
	85	int ndev;
	86	dev_node_t node;
	87	int hd;
	88	} ide_info_t;
	89
	90	static void ide_release(dev_link_t *);
f8cfa618	91	static void ide_config(dev_link_t *);
1da177e4	92
cc3b4866	93	static void ide_detach(struct pcmcia_device *p_dev);
1da177e4	94
b4635811 DB	95
b4635811 DB	96
1da177e4 LT	97
	98	/*======================================================================
	99
	100	ide_attach() creates an "instance" of the driver, allocating
	101	local data structures for one device. The device is registered
	102	with Card Services.
	103
	104	======================================================================*/
	105
f8cfa618	106	static int ide_attach(struct pcmcia_device *p_dev)
1da177e4 LT	107	{
	108	ide_info_t *info;
	109	dev_link_t *link;
f8cfa618	110
1da177e4 LT	111	DEBUG(0, "ide_attach()\n");
	112
	113	/* Create new ide device */
f5e3c2fa	114	info = kzalloc(sizeof(*info), GFP_KERNEL);
f8cfa618 DB	115	if (!info)
f8cfa618 DB	116	return -ENOMEM;
1da177e4 LT	117	link = &info->link; link->priv = info;
	118
	119	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
	120	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
	121	link->io.IOAddrLines = 3;
	122	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
	123	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
	124	link->conf.Attributes = CONF_ENABLE_IRQ;
	125	link->conf.Vcc = 50;
	126	link->conf.IntType = INT_MEMORY_AND_IO;
f8cfa618 DB	127
	128	link->handle = p_dev;
	129	p_dev->instance = link;
	130
	131	link->state \|= DEV_PRESENT \| DEV_CONFIG_PENDING;
	132	ide_config(link);
	133
	134	return 0;
1da177e4 LT	135	} /* ide_attach */
	136
	137	/*======================================================================
	138
	139	This deletes a driver "instance". The device is de-registered
	140	with Card Services. If it has been released, all local data
	141	structures are freed. Otherwise, the structures will be freed
	142	when the device is released.
	143
	144	======================================================================*/
	145
cc3b4866	146	static void ide_detach(struct pcmcia_device *p_dev)
1da177e4	147	{
cc3b4866	148	dev_link_t *link = dev_to_instance(p_dev);
1da177e4 LT	149
1da177e4 LT	150	DEBUG(0, "ide_detach(0x%p)\n", link);
1da177e4 LT	151
	152	if (link->state & DEV_CONFIG)
	153	ide_release(link);
b4635811	154
1da177e4	155	kfree(link->priv);
1da177e4 LT	156	} /* ide_detach */
1da177e4 LT	157
4349d5cd	158	static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
1da177e4 LT	159	{
	160	hw_regs_t hw;
	161	memset(&hw, 0, sizeof(hw));
	162	ide_init_hwif_ports(&hw, io, ctl, NULL);
	163	hw.irq = irq;
	164	hw.chipset = ide_pci;
4349d5cd	165	hw.dev = &handle->dev;
1da177e4 LT	166	return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
	167	}
	168
	169	/*======================================================================
	170
	171	ide_config() is scheduled to run after a CARD_INSERTION event
	172	is received, to configure the PCMCIA socket, and to make the
	173	ide device available to the system.
	174
	175	======================================================================*/
	176
	177	#define CS_CHECK(fn, ret) \
	178	do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
	179
	180	static void ide_config(dev_link_t *link)
	181	{
	182	client_handle_t handle = link->handle;
	183	ide_info_t *info = link->priv;
	184	tuple_t tuple;
	185	struct {
	186	u_short buf[128];
	187	cisparse_t parse;
	188	config_info_t conf;
	189	cistpl_cftable_entry_t dflt;
	190	} *stk = NULL;
	191	cistpl_cftable_entry_t *cfg;
	192	int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
	193	unsigned long io_base, ctl_base;
	194
	195	DEBUG(0, "ide_config(0x%p)\n", link);
	196
f5e3c2fa	197	stk = kzalloc(sizeof(*stk), GFP_KERNEL);
1da177e4	198	if (!stk) goto err_mem;
1da177e4 LT	199	cfg = &stk->parse.cftable_entry;
	200
	201	tuple.TupleData = (cisdata_t *)&stk->buf;
	202	tuple.TupleOffset = 0;
	203	tuple.TupleDataMax = 255;
	204	tuple.Attributes = 0;
	205	tuple.DesiredTuple = CISTPL_CONFIG;
	206	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	207	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
	208	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &stk->parse));
	209	link->conf.ConfigBase = stk->parse.config.base;
	210	link->conf.Present = stk->parse.config.rmask[0];
	211
	212	tuple.DesiredTuple = CISTPL_MANFID;
	213	if (!pcmcia_get_first_tuple(handle, &tuple) &&
	214	!pcmcia_get_tuple_data(handle, &tuple) &&
	215	!pcmcia_parse_tuple(handle, &tuple, &stk->parse))
	216	is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
	217	((stk->parse.manfid.card == PRODID_KME_KXLC005_A) \|\|
	218	(stk->parse.manfid.card == PRODID_KME_KXLC005_B)));
	219
	220	/* Configure card */
	221	link->state \|= DEV_CONFIG;
	222
	223	/* Not sure if this is right... look up the current Vcc */
	224	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));
	225	link->conf.Vcc = stk->conf.Vcc;
	226
	227	pass = io_base = ctl_base = 0;
	228	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
	229	tuple.Attributes = 0;
	230	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	231	while (1) {
	232	if (pcmcia_get_tuple_data(handle, &tuple) != 0) goto next_entry;
	233	if (pcmcia_parse_tuple(handle, &tuple, &stk->parse) != 0) goto next_entry;
	234
	235	/* Check for matching Vcc, unless we're desperate */
	236	if (!pass) {
	237	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
	238	if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
	239	goto next_entry;
	240	} else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
	241	if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
	242	goto next_entry;
	243	}
	244	}
	245
	246	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
	247	link->conf.Vpp1 = link->conf.Vpp2 =
	248	cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
	249	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
	250	link->conf.Vpp1 = link->conf.Vpp2 =
	251	stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
	252
	253	if ((cfg->io.nwin > 0) \|\| (stk->dflt.io.nwin > 0)) {
	254	cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
	255	link->conf.ConfigIndex = cfg->index;
	256	link->io.BasePort1 = io->win[0].base;
	257	link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	258	if (!(io->flags & CISTPL_IO_16BIT))
	259	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	260	if (io->nwin == 2) {
	261	link->io.NumPorts1 = 8;
	262	link->io.BasePort2 = io->win[1].base;
263	link->io.NumPorts2 = (is_kme) ? 2 : 1;
264	if (pcmcia_request_io(link->handle, &link->io) != 0)
265	goto next_entry;
266	io_base = link->io.BasePort1;
267	ctl_base = link->io.BasePort2;
268	} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
269	link->io.NumPorts1 = io->win[0].len;
270	link->io.NumPorts2 = 0;
271	if (pcmcia_request_io(link->handle, &link->io) != 0)
272	goto next_entry;
273	io_base = link->io.BasePort1;
274	ctl_base = link->io.BasePort1 + 0x0e;
275	} else goto next_entry;
276	/* If we've got this far, we're done */
277	break;
278	}
279
280	next_entry:
281	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
282	memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
283	if (pass) {
284	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
285	} else if (pcmcia_get_next_tuple(handle, &tuple) != 0) {
286	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
287	memset(&stk->dflt, 0, sizeof(stk->dflt));
288	pass++;
289	}
290	}
291
292	CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
293	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
294
295	/* disable drive interrupts during IDE probe */
296	outb(0x02, ctl_base);
297
298	/* special setup for KXLC005 card */
299	if (is_kme)
300	outb(0x81, ctl_base+1);
301
302	/* retry registration in case device is still spinning up */
303	for (hd = -1, i = 0; i < 10; i++) {
4349d5cd	304	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
1da177e4 LT	305	if (hd >= 0) break;
	306	if (link->io.NumPorts1 == 0x20) {
	307	outb(0x02, ctl_base + 0x10);
	308	hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
4349d5cd	309	link->irq.AssignedIRQ, handle);
1da177e4 LT	310	if (hd >= 0) {
	311	io_base += 0x10;
	312	ctl_base += 0x10;
	313	break;
	314	}
	315	}
2aad5f03	316	msleep(100);
1da177e4 LT	317	}
	318
	319	if (hd < 0) {
	320	printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
	321	", irq %u failed\n", io_base, ctl_base,
	322	link->irq.AssignedIRQ);
	323	goto failed;
	324	}
	325
	326	info->ndev = 1;
	327	sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
	328	info->node.major = ide_major[hd];
	329	info->node.minor = 0;
	330	info->hd = hd;
	331	link->dev = &info->node;
	332	printk(KERN_INFO "ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",
	333	info->node.dev_name, link->conf.Vcc / 10, link->conf.Vcc % 10,
	334	link->conf.Vpp1 / 10, link->conf.Vpp1 % 10);
	335
	336	link->state &= ~DEV_CONFIG_PENDING;
	337	kfree(stk);
	338	return;
	339
	340	err_mem:
	341	printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
	342	goto failed;
	343
	344	cs_failed:
	345	cs_error(link->handle, last_fn, last_ret);
	346	failed:
	347	kfree(stk);
	348	ide_release(link);
	349	link->state &= ~DEV_CONFIG_PENDING;
	350	} /* ide_config */
	351
	352	/*======================================================================
	353
	354	After a card is removed, ide_release() will unregister the net
	355	device, and release the PCMCIA configuration. If the device is
	356	still open, this will be postponed until it is closed.
	357
	358	======================================================================*/
	359
	360	void ide_release(dev_link_t *link)
	361	{
	362	ide_info_t *info = link->priv;
	363
	364	DEBUG(0, "ide_release(0x%p)\n", link);
	365
	366	if (info->ndev) {
	367	/* FIXME: if this fails we need to queue the cleanup somehow
	368	-- need to investigate the required PCMCIA magic */
	369	ide_unregister(info->hd);
	370	}
	371	info->ndev = 0;
	372	link->dev = NULL;
	373
	374	pcmcia_release_configuration(link->handle);
	375	pcmcia_release_io(link->handle, &link->io);
	376	pcmcia_release_irq(link->handle, &link->irq);
	377
	378	link->state &= ~DEV_CONFIG;
	379
	380	} /* ide_release */
381
98e4c28b DB	382	static int ide_suspend(struct pcmcia_device *dev)
	383	{
	384	dev_link_t *link = dev_to_instance(dev);
	385
	386	link->state \|= DEV_SUSPEND;
	387	if (link->state & DEV_CONFIG)
	388	pcmcia_release_configuration(link->handle);
	389
	390	return 0;
	391	}
	392
	393	static int ide_resume(struct pcmcia_device *dev)
	394	{
	395	dev_link_t *link = dev_to_instance(dev);
	396
	397	link->state &= ~DEV_SUSPEND;
	398	if (DEV_OK(link))
	399	pcmcia_request_configuration(link->handle, &link->conf);
	400
	401	return 0;
	402	}
	403
1da177e4 LT	404	/*======================================================================
	405
	406	The card status event handler. Mostly, this schedules other
	407	stuff to run after an event is received. A CARD_REMOVAL event
	408	also sets some flags to discourage the ide drivers from
	409	talking to the ports.
	410
	411	======================================================================*/
	412
f70b7d40 DB	413	static struct pcmcia_device_id ide_ids[] = {
f70b7d40 DB	414	PCMCIA_DEVICE_FUNC_ID(4),
725a6abf	415	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
f70b7d40	416	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
d3feb184 DB	417	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
d3feb184 DB	418	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
f70b7d40	419	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
d3feb184	420	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
725a6abf	421	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
f70b7d40	422	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
d3feb184	423	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */
f70b7d40 DB	424	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
	425	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
	426	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
	427	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
	428	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
	429	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
	430	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
	431	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
d277ad0e	432	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
f70b7d40 DB	433	PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
	434	PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
	435	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
725a6abf RP	436	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
725a6abf RP	437	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
f70b7d40 DB	438	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
	439	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
	440	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
	441	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
	442	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
2570b746	443	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
f70b7d40 DB	444	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
	445	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
	446	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
	447	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
	448	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
	449	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
d3feb184	450	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
698e22c4	451	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
f70b7d40 DB	452	PCMCIA_DEVICE_NULL,
	453	};
	454	MODULE_DEVICE_TABLE(pcmcia, ide_ids);
	455
1da177e4 LT	456	static struct pcmcia_driver ide_cs_driver = {
	457	.owner = THIS_MODULE,
	458	.drv = {
	459	.name = "ide-cs",
	460	},
f8cfa618	461	.probe = ide_attach,
cc3b4866	462	.remove = ide_detach,
f70b7d40	463	.id_table = ide_ids,
98e4c28b DB	464	.suspend = ide_suspend,
98e4c28b DB	465	.resume = ide_resume,
1da177e4 LT	466	};
	467
	468	static int __init init_ide_cs(void)
	469	{
	470	return pcmcia_register_driver(&ide_cs_driver);
	471	}
	472
	473	static void __exit exit_ide_cs(void)
	474	{
	475	pcmcia_unregister_driver(&ide_cs_driver);
1da177e4 LT	476	}
1da177e4 LT	477
2b8d4669	478	late_initcall(init_ide_cs);
1da177e4	479	module_exit(exit_ide_cs);