Commit | Line | Data |
---|---|---|
a28d3af2 BH |
1 | /* |
2 | i2c Support for Apple SMU Controller | |
3 | ||
4 | Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp. | |
5 | <benh@kernel.crashing.org> | |
6 | ||
7 | This program is free software; you can redistribute it and/or modify | |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 2 of the License, or | |
10 | (at your option) any later version. | |
11 | ||
12 | This program is distributed in the hope that it will be useful, | |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License | |
18 | along with this program; if not, write to the Free Software | |
19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | ||
21 | */ | |
22 | ||
a28d3af2 BH |
23 | #include <linux/module.h> |
24 | #include <linux/kernel.h> | |
25 | #include <linux/types.h> | |
26 | #include <linux/i2c.h> | |
27 | #include <linux/init.h> | |
a28d3af2 BH |
28 | #include <linux/device.h> |
29 | #include <linux/platform_device.h> | |
30 | #include <asm/prom.h> | |
31 | #include <asm/pmac_low_i2c.h> | |
32 | ||
33 | MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); | |
34 | MODULE_DESCRIPTION("I2C driver for Apple PowerMac"); | |
35 | MODULE_LICENSE("GPL"); | |
36 | ||
37 | /* | |
38 | * SMBUS-type transfer entrypoint | |
39 | */ | |
40 | static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, | |
41 | u16 addr, | |
42 | unsigned short flags, | |
43 | char read_write, | |
44 | u8 command, | |
45 | int size, | |
46 | union i2c_smbus_data* data) | |
47 | { | |
48 | struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); | |
49 | int rc = 0; | |
50 | int read = (read_write == I2C_SMBUS_READ); | |
51 | int addrdir = (addr << 1) | read; | |
02864d58 JD |
52 | int mode, subsize, len; |
53 | u32 subaddr; | |
54 | u8 *buf; | |
a28d3af2 BH |
55 | u8 local[2]; |
56 | ||
02864d58 JD |
57 | if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) { |
58 | mode = pmac_i2c_mode_std; | |
59 | subsize = 0; | |
60 | subaddr = 0; | |
61 | } else { | |
62 | mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub; | |
63 | subsize = 1; | |
64 | subaddr = command; | |
65 | } | |
a28d3af2 BH |
66 | |
67 | switch (size) { | |
68 | case I2C_SMBUS_QUICK: | |
02864d58 JD |
69 | buf = NULL; |
70 | len = 0; | |
a28d3af2 BH |
71 | break; |
72 | case I2C_SMBUS_BYTE: | |
a28d3af2 | 73 | case I2C_SMBUS_BYTE_DATA: |
02864d58 JD |
74 | buf = &data->byte; |
75 | len = 1; | |
a28d3af2 BH |
76 | break; |
77 | case I2C_SMBUS_WORD_DATA: | |
a28d3af2 BH |
78 | if (!read) { |
79 | local[0] = data->word & 0xff; | |
80 | local[1] = (data->word >> 8) & 0xff; | |
81 | } | |
02864d58 JD |
82 | buf = local; |
83 | len = 2; | |
a28d3af2 BH |
84 | break; |
85 | ||
86 | /* Note that these are broken vs. the expected smbus API where | |
96acafe0 | 87 | * on reads, the length is actually returned from the function, |
a28d3af2 BH |
88 | * but I think the current API makes no sense and I don't want |
89 | * any driver that I haven't verified for correctness to go | |
90 | * anywhere near a pmac i2c bus anyway ... | |
91 | * | |
92 | * I'm also not completely sure what kind of phases to do between | |
93 | * the actual command and the data (what I am _supposed_ to do that | |
94 | * is). For now, I assume writes are a single stream and reads have | |
95 | * a repeat start/addr phase (but not stop in between) | |
96 | */ | |
97 | case I2C_SMBUS_BLOCK_DATA: | |
02864d58 JD |
98 | buf = data->block; |
99 | len = data->block[0] + 1; | |
a28d3af2 BH |
100 | break; |
101 | case I2C_SMBUS_I2C_BLOCK_DATA: | |
02864d58 JD |
102 | buf = &data->block[1]; |
103 | len = data->block[0]; | |
a28d3af2 BH |
104 | break; |
105 | ||
106 | default: | |
02864d58 | 107 | return -EINVAL; |
a28d3af2 | 108 | } |
02864d58 JD |
109 | |
110 | rc = pmac_i2c_open(bus, 0); | |
d7d838a6 JD |
111 | if (rc) { |
112 | dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc); | |
02864d58 | 113 | return rc; |
d7d838a6 | 114 | } |
02864d58 JD |
115 | |
116 | rc = pmac_i2c_setmode(bus, mode); | |
d7d838a6 JD |
117 | if (rc) { |
118 | dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n", | |
119 | mode, rc); | |
02864d58 | 120 | goto bail; |
d7d838a6 | 121 | } |
02864d58 JD |
122 | |
123 | rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len); | |
d7d838a6 | 124 | if (rc) { |
8e4b980c JD |
125 | if (rc == -ENXIO) |
126 | dev_dbg(&adap->dev, | |
127 | "I2C transfer at 0x%02x failed, size %d, " | |
128 | "err %d\n", addrdir >> 1, size, rc); | |
129 | else | |
130 | dev_err(&adap->dev, | |
131 | "I2C transfer at 0x%02x failed, size %d, " | |
132 | "err %d\n", addrdir >> 1, size, rc); | |
02864d58 | 133 | goto bail; |
d7d838a6 | 134 | } |
02864d58 JD |
135 | |
136 | if (size == I2C_SMBUS_WORD_DATA && read) { | |
137 | data->word = ((u16)local[1]) << 8; | |
138 | data->word |= local[0]; | |
139 | } | |
140 | ||
a28d3af2 BH |
141 | bail: |
142 | pmac_i2c_close(bus); | |
143 | return rc; | |
144 | } | |
145 | ||
146 | /* | |
147 | * Generic i2c master transfer entrypoint. This driver only support single | |
148 | * messages (for "lame i2c" transfers). Anything else should use the smbus | |
149 | * entry point | |
150 | */ | |
151 | static int i2c_powermac_master_xfer( struct i2c_adapter *adap, | |
152 | struct i2c_msg *msgs, | |
153 | int num) | |
154 | { | |
155 | struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); | |
156 | int rc = 0; | |
157 | int read; | |
158 | int addrdir; | |
159 | ||
6f7e549f JD |
160 | if (num != 1) { |
161 | dev_err(&adap->dev, | |
162 | "Multi-message I2C transactions not supported\n"); | |
163 | return -EOPNOTSUPP; | |
164 | } | |
165 | ||
a28d3af2 BH |
166 | if (msgs->flags & I2C_M_TEN) |
167 | return -EINVAL; | |
168 | read = (msgs->flags & I2C_M_RD) != 0; | |
169 | addrdir = (msgs->addr << 1) | read; | |
a28d3af2 BH |
170 | |
171 | rc = pmac_i2c_open(bus, 0); | |
d7d838a6 JD |
172 | if (rc) { |
173 | dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc); | |
a28d3af2 | 174 | return rc; |
d7d838a6 | 175 | } |
a28d3af2 | 176 | rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); |
d7d838a6 JD |
177 | if (rc) { |
178 | dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n", | |
179 | pmac_i2c_mode_std, rc); | |
a28d3af2 | 180 | goto bail; |
d7d838a6 | 181 | } |
a28d3af2 | 182 | rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len); |
8e4b980c JD |
183 | if (rc < 0) { |
184 | if (rc == -ENXIO) | |
185 | dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n", | |
186 | addrdir & 1 ? "read from" : "write to", | |
187 | addrdir >> 1, rc); | |
188 | else | |
189 | dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n", | |
190 | addrdir & 1 ? "read from" : "write to", | |
191 | addrdir >> 1, rc); | |
192 | } | |
a28d3af2 BH |
193 | bail: |
194 | pmac_i2c_close(bus); | |
8ced8eee | 195 | return rc < 0 ? rc : 1; |
a28d3af2 BH |
196 | } |
197 | ||
198 | static u32 i2c_powermac_func(struct i2c_adapter * adapter) | |
199 | { | |
200 | return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | | |
201 | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | | |
202 | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C; | |
203 | } | |
204 | ||
205 | /* For now, we only handle smbus */ | |
8f9082c5 | 206 | static const struct i2c_algorithm i2c_powermac_algorithm = { |
a28d3af2 BH |
207 | .smbus_xfer = i2c_powermac_smbus_xfer, |
208 | .master_xfer = i2c_powermac_master_xfer, | |
209 | .functionality = i2c_powermac_func, | |
210 | }; | |
211 | ||
212 | ||
0b255e92 | 213 | static int i2c_powermac_remove(struct platform_device *dev) |
a28d3af2 | 214 | { |
9f2545c1 | 215 | struct i2c_adapter *adapter = platform_get_drvdata(dev); |
a28d3af2 BH |
216 | int rc; |
217 | ||
218 | rc = i2c_del_adapter(adapter); | |
a28d3af2 BH |
219 | /* We aren't that prepared to deal with this... */ |
220 | if (rc) | |
154d22b0 FS |
221 | printk(KERN_WARNING |
222 | "i2c-powermac.c: Failed to remove bus %s !\n", | |
a28d3af2 | 223 | adapter->name); |
6dfa5ca3 | 224 | memset(adapter, 0, sizeof(*adapter)); |
a28d3af2 BH |
225 | |
226 | return 0; | |
227 | } | |
228 | ||
0b255e92 | 229 | static u32 i2c_powermac_get_addr(struct i2c_adapter *adap, |
3a3dd018 BH |
230 | struct pmac_i2c_bus *bus, |
231 | struct device_node *node) | |
232 | { | |
233 | const __be32 *prop; | |
234 | int len; | |
235 | ||
236 | /* First check for valid "reg" */ | |
237 | prop = of_get_property(node, "reg", &len); | |
238 | if (prop && (len >= sizeof(int))) | |
239 | return (be32_to_cpup(prop) & 0xff) >> 1; | |
240 | ||
241 | /* Then check old-style "i2c-address" */ | |
242 | prop = of_get_property(node, "i2c-address", &len); | |
243 | if (prop && (len >= sizeof(int))) | |
244 | return (be32_to_cpup(prop) & 0xff) >> 1; | |
245 | ||
246 | /* Now handle some devices with missing "reg" properties */ | |
247 | if (!strcmp(node->name, "cereal")) | |
248 | return 0x60; | |
249 | else if (!strcmp(node->name, "deq")) | |
250 | return 0x34; | |
251 | ||
252 | dev_warn(&adap->dev, "No i2c address for %s\n", node->full_name); | |
253 | ||
254 | return 0xffffffff; | |
255 | } | |
256 | ||
0b255e92 | 257 | static void i2c_powermac_create_one(struct i2c_adapter *adap, |
3a3dd018 BH |
258 | const char *type, |
259 | u32 addr) | |
260 | { | |
261 | struct i2c_board_info info = {}; | |
262 | struct i2c_client *newdev; | |
263 | ||
264 | strncpy(info.type, type, sizeof(info.type)); | |
265 | info.addr = addr; | |
266 | newdev = i2c_new_device(adap, &info); | |
267 | if (!newdev) | |
268 | dev_err(&adap->dev, | |
269 | "i2c-powermac: Failure to register missing %s\n", | |
270 | type); | |
271 | } | |
272 | ||
0b255e92 | 273 | static void i2c_powermac_add_missing(struct i2c_adapter *adap, |
3a3dd018 BH |
274 | struct pmac_i2c_bus *bus, |
275 | bool found_onyx) | |
276 | { | |
277 | struct device_node *busnode = pmac_i2c_get_bus_node(bus); | |
278 | int rc; | |
279 | ||
280 | /* Check for the onyx audio codec */ | |
281 | #define ONYX_REG_CONTROL 67 | |
282 | if (of_device_is_compatible(busnode, "k2-i2c") && !found_onyx) { | |
283 | union i2c_smbus_data data; | |
284 | ||
285 | rc = i2c_smbus_xfer(adap, 0x46, 0, I2C_SMBUS_READ, | |
286 | ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, | |
287 | &data); | |
288 | if (rc >= 0) | |
289 | i2c_powermac_create_one(adap, "MAC,pcm3052", 0x46); | |
290 | ||
291 | rc = i2c_smbus_xfer(adap, 0x47, 0, I2C_SMBUS_READ, | |
292 | ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, | |
293 | &data); | |
294 | if (rc >= 0) | |
295 | i2c_powermac_create_one(adap, "MAC,pcm3052", 0x47); | |
296 | } | |
297 | } | |
298 | ||
0b255e92 | 299 | static bool i2c_powermac_get_type(struct i2c_adapter *adap, |
3a3dd018 BH |
300 | struct device_node *node, |
301 | u32 addr, char *type, int type_size) | |
302 | { | |
303 | char tmp[16]; | |
304 | ||
305 | /* Note: we to _NOT_ want the standard | |
306 | * i2c drivers to match with any of our powermac stuff | |
307 | * unless they have been specifically modified to handle | |
308 | * it on a case by case basis. For example, for thermal | |
309 | * control, things like lm75 etc... shall match with their | |
310 | * corresponding windfarm drivers, _NOT_ the generic ones, | |
311 | * so we force a prefix of AAPL, onto the modalias to | |
312 | * make that happen | |
313 | */ | |
314 | ||
315 | /* First try proper modalias */ | |
316 | if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) { | |
317 | snprintf(type, type_size, "MAC,%s", tmp); | |
318 | return true; | |
319 | } | |
320 | ||
321 | /* Now look for known workarounds */ | |
322 | if (!strcmp(node->name, "deq")) { | |
323 | /* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */ | |
324 | if (addr == 0x34) { | |
325 | snprintf(type, type_size, "MAC,tas3001"); | |
326 | return true; | |
327 | } else if (addr == 0x35) { | |
328 | snprintf(type, type_size, "MAC,tas3004"); | |
329 | return true; | |
330 | } | |
331 | } | |
332 | ||
333 | dev_err(&adap->dev, "i2c-powermac: modalias failure" | |
334 | " on %s\n", node->full_name); | |
335 | return false; | |
336 | } | |
337 | ||
0b255e92 | 338 | static void i2c_powermac_register_devices(struct i2c_adapter *adap, |
81e5d864 BH |
339 | struct pmac_i2c_bus *bus) |
340 | { | |
341 | struct i2c_client *newdev; | |
342 | struct device_node *node; | |
3a3dd018 BH |
343 | bool found_onyx = 0; |
344 | ||
345 | /* | |
346 | * In some cases we end up with the via-pmu node itself, in this | |
347 | * case we skip this function completely as the device-tree will | |
348 | * not contain anything useful. | |
349 | */ | |
350 | if (!strcmp(adap->dev.of_node->name, "via-pmu")) | |
351 | return; | |
81e5d864 BH |
352 | |
353 | for_each_child_of_node(adap->dev.of_node, node) { | |
354 | struct i2c_board_info info = {}; | |
81e5d864 | 355 | u32 addr; |
81e5d864 BH |
356 | |
357 | /* Get address & channel */ | |
3a3dd018 BH |
358 | addr = i2c_powermac_get_addr(adap, bus, node); |
359 | if (addr == 0xffffffff) | |
81e5d864 | 360 | continue; |
81e5d864 BH |
361 | |
362 | /* Multibus setup, check channel */ | |
363 | if (!pmac_i2c_match_adapter(node, adap)) | |
364 | continue; | |
365 | ||
366 | dev_dbg(&adap->dev, "i2c-powermac: register %s\n", | |
367 | node->full_name); | |
368 | ||
3a3dd018 BH |
369 | /* |
370 | * Keep track of some device existence to handle | |
371 | * workarounds later. | |
81e5d864 | 372 | */ |
3a3dd018 BH |
373 | if (of_device_is_compatible(node, "pcm3052")) |
374 | found_onyx = true; | |
375 | ||
376 | /* Make up a modalias */ | |
377 | if (!i2c_powermac_get_type(adap, node, addr, | |
378 | info.type, sizeof(info.type))) { | |
81e5d864 BH |
379 | continue; |
380 | } | |
81e5d864 BH |
381 | |
382 | /* Fill out the rest of the info structure */ | |
3a3dd018 | 383 | info.addr = addr; |
81e5d864 BH |
384 | info.irq = irq_of_parse_and_map(node, 0); |
385 | info.of_node = of_node_get(node); | |
81e5d864 BH |
386 | |
387 | newdev = i2c_new_device(adap, &info); | |
388 | if (!newdev) { | |
389 | dev_err(&adap->dev, "i2c-powermac: Failure to register" | |
390 | " %s\n", node->full_name); | |
391 | of_node_put(node); | |
392 | /* We do not dispose of the interrupt mapping on | |
393 | * purpose. It's not necessary (interrupt cannot be | |
394 | * re-used) and somebody else might have grabbed it | |
395 | * via direct DT lookup so let's not bother | |
396 | */ | |
397 | continue; | |
398 | } | |
399 | } | |
3a3dd018 BH |
400 | |
401 | /* Additional workarounds */ | |
402 | i2c_powermac_add_missing(adap, bus, found_onyx); | |
81e5d864 | 403 | } |
a28d3af2 | 404 | |
0b255e92 | 405 | static int i2c_powermac_probe(struct platform_device *dev) |
a28d3af2 | 406 | { |
9f2545c1 | 407 | struct pmac_i2c_bus *bus = dev->dev.platform_data; |
a28d3af2 BH |
408 | struct device_node *parent = NULL; |
409 | struct i2c_adapter *adapter; | |
018a3d1d | 410 | const char *basename; |
a28d3af2 BH |
411 | int rc; |
412 | ||
413 | if (bus == NULL) | |
414 | return -EINVAL; | |
bc6286e5 | 415 | adapter = pmac_i2c_get_adapter(bus); |
a28d3af2 BH |
416 | |
417 | /* Ok, now we need to make up a name for the interface that will | |
418 | * match what we used to do in the past, that is basically the | |
419 | * controller's parent device node for keywest. PMU didn't have a | |
420 | * naming convention and SMU has a different one | |
421 | */ | |
422 | switch(pmac_i2c_get_type(bus)) { | |
423 | case pmac_i2c_bus_keywest: | |
424 | parent = of_get_parent(pmac_i2c_get_controller(bus)); | |
425 | if (parent == NULL) | |
426 | return -EINVAL; | |
427 | basename = parent->name; | |
428 | break; | |
429 | case pmac_i2c_bus_pmu: | |
430 | basename = "pmu"; | |
431 | break; | |
432 | case pmac_i2c_bus_smu: | |
433 | /* This is not what we used to do but I'm fixing drivers at | |
434 | * the same time as this change | |
435 | */ | |
436 | basename = "smu"; | |
437 | break; | |
438 | default: | |
439 | return -EINVAL; | |
440 | } | |
bc6286e5 JD |
441 | snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename, |
442 | pmac_i2c_get_channel(bus)); | |
a28d3af2 BH |
443 | of_node_put(parent); |
444 | ||
9f2545c1 | 445 | platform_set_drvdata(dev, adapter); |
a28d3af2 BH |
446 | adapter->algo = &i2c_powermac_algorithm; |
447 | i2c_set_adapdata(adapter, bus); | |
9f2545c1 | 448 | adapter->dev.parent = &dev->dev; |
81e5d864 | 449 | adapter->dev.of_node = dev->dev.of_node; |
a28d3af2 BH |
450 | rc = i2c_add_adapter(adapter); |
451 | if (rc) { | |
452 | printk(KERN_ERR "i2c-powermac: Adapter %s registration " | |
bc6286e5 | 453 | "failed\n", adapter->name); |
6dfa5ca3 | 454 | memset(adapter, 0, sizeof(*adapter)); |
a28d3af2 BH |
455 | } |
456 | ||
bc6286e5 | 457 | printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name); |
810ad7b6 | 458 | |
81e5d864 BH |
459 | /* Cannot use of_i2c_register_devices() due to Apple device-tree |
460 | * funkyness | |
461 | */ | |
462 | i2c_powermac_register_devices(adapter, bus); | |
810ad7b6 | 463 | |
a28d3af2 BH |
464 | return rc; |
465 | } | |
466 | ||
9f2545c1 | 467 | static struct platform_driver i2c_powermac_driver = { |
a28d3af2 | 468 | .probe = i2c_powermac_probe, |
0b255e92 | 469 | .remove = i2c_powermac_remove, |
9f2545c1 BH |
470 | .driver = { |
471 | .name = "i2c-powermac", | |
472 | .bus = &platform_bus_type, | |
473 | }, | |
a28d3af2 BH |
474 | }; |
475 | ||
a3664b51 | 476 | module_platform_driver(i2c_powermac_driver); |
a28d3af2 | 477 | |
a3664b51 | 478 | MODULE_ALIAS("platform:i2c-powermac"); |