projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
sched/cputime: Add vtime guest task state
[linux-2.6-block.git] / drivers / hwmon / w83792d.c
CommitLineData
74ba9207 1// SPDX-License-Identifier: GPL-2.0-or-later
5563e27d 2/*
d1743681
GR		 3 * w83792d.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 * Copyright (C) 2004, 2005 Winbond Electronics Corp.
f85b5205 6 * Shane Huang,
d1743681
GR		 7 * Rudolf Marek <r.marek@assembler.cz>
8 *
d1743681
GR		 9 * Note:
10 * 1. This driver is only for 2.6 kernel, 2.4 kernel need a different driver.
11 * 2. This driver is only for Winbond W83792D C version device, there
12 * are also some motherboards with B version W83792D device. The
13 * calculation method to in6-in7(measured value, limits) is a little
14 * different between C and B version. C or B version can be identified
15 * by CR[0x49h].
16 */
5563e27d
M		 17
18/*
d1743681
GR		 19 * Supports following chips:
20 *
4101ece3 21 * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
d1743681
GR		 22 * w83792d 9 7 7 3 0x7a 0x5ca3 yes no
23 */
5563e27d 24
5563e27d
M		 25#include <linux/module.h>
26#include <linux/init.h>
27#include <linux/slab.h>
28#include <linux/i2c.h>
ce785ab4 29#include <linux/hwmon.h>
5563e27d 30#include <linux/hwmon-sysfs.h>
ce785ab4 31#include <linux/err.h>
9a61bf63 32#include <linux/mutex.h>
f52f79da 33#include <linux/sysfs.h>
dcd8f392 34#include <linux/jiffies.h>
5563e27d
M		 35
36/* Addresses to scan */
25e9c86d
MH		 37static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
38 I2C_CLIENT_END };
5563e27d
M		 39
40/* Insmod parameters */
3aed198c
JD		 41
42static unsigned short force_subclients[4];
43module_param_array(force_subclients, short, NULL, 0);
b55f3757
GR		 44MODULE_PARM_DESC(force_subclients,
45 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
5563e27d 46
90ab5ee9 47static bool init;
5563e27d
M		 48module_param(init, bool, 0);
49MODULE_PARM_DESC(init, "Set to one to force chip initialization");
50
51/* The W83792D registers */
52static const u8 W83792D_REG_IN[9] = {
53 0x20, /* Vcore A in DataSheet */
54 0x21, /* Vcore B in DataSheet */
55 0x22, /* VIN0 in DataSheet */
56 0x23, /* VIN1 in DataSheet */
57 0x24, /* VIN2 in DataSheet */
58 0x25, /* VIN3 in DataSheet */
59 0x26, /* 5VCC in DataSheet */
60 0xB0, /* 5VSB in DataSheet */
61 0xB1 /* VBAT in DataSheet */
62};
63#define W83792D_REG_LOW_BITS1 0x3E /* Low Bits I in DataSheet */
64#define W83792D_REG_LOW_BITS2 0x3F /* Low Bits II in DataSheet */
65static const u8 W83792D_REG_IN_MAX[9] = {
66 0x2B, /* Vcore A High Limit in DataSheet */
67 0x2D, /* Vcore B High Limit in DataSheet */
68 0x2F, /* VIN0 High Limit in DataSheet */
69 0x31, /* VIN1 High Limit in DataSheet */
70 0x33, /* VIN2 High Limit in DataSheet */
71 0x35, /* VIN3 High Limit in DataSheet */
72 0x37, /* 5VCC High Limit in DataSheet */
73 0xB4, /* 5VSB High Limit in DataSheet */
74 0xB6 /* VBAT High Limit in DataSheet */
75};
76static const u8 W83792D_REG_IN_MIN[9] = {
77 0x2C, /* Vcore A Low Limit in DataSheet */
78 0x2E, /* Vcore B Low Limit in DataSheet */
79 0x30, /* VIN0 Low Limit in DataSheet */
80 0x32, /* VIN1 Low Limit in DataSheet */
81 0x34, /* VIN2 Low Limit in DataSheet */
82 0x36, /* VIN3 Low Limit in DataSheet */
83 0x38, /* 5VCC Low Limit in DataSheet */
84 0xB5, /* 5VSB Low Limit in DataSheet */
85 0xB7 /* VBAT Low Limit in DataSheet */
86};
87static const u8 W83792D_REG_FAN[7] = {
88 0x28, /* FAN 1 Count in DataSheet */
89 0x29, /* FAN 2 Count in DataSheet */
90 0x2A, /* FAN 3 Count in DataSheet */
91 0xB8, /* FAN 4 Count in DataSheet */
92 0xB9, /* FAN 5 Count in DataSheet */
93 0xBA, /* FAN 6 Count in DataSheet */
94 0xBE /* FAN 7 Count in DataSheet */
95};
96static const u8 W83792D_REG_FAN_MIN[7] = {
97 0x3B, /* FAN 1 Count Low Limit in DataSheet */
98 0x3C, /* FAN 2 Count Low Limit in DataSheet */
99 0x3D, /* FAN 3 Count Low Limit in DataSheet */
100 0xBB, /* FAN 4 Count Low Limit in DataSheet */
101 0xBC, /* FAN 5 Count Low Limit in DataSheet */
102 0xBD, /* FAN 6 Count Low Limit in DataSheet */
103 0xBF /* FAN 7 Count Low Limit in DataSheet */
104};
105#define W83792D_REG_FAN_CFG 0x84 /* FAN Configuration in DataSheet */
106static const u8 W83792D_REG_FAN_DIV[4] = {
107 0x47, /* contains FAN2 and FAN1 Divisor */
108 0x5B, /* contains FAN4 and FAN3 Divisor */
109 0x5C, /* contains FAN6 and FAN5 Divisor */
110 0x9E /* contains FAN7 Divisor. */
111};
112static const u8 W83792D_REG_PWM[7] = {
113 0x81, /* FAN 1 Duty Cycle, be used to control */
114 0x83, /* FAN 2 Duty Cycle, be used to control */
115 0x94, /* FAN 3 Duty Cycle, be used to control */
116 0xA3, /* FAN 4 Duty Cycle, be used to control */
117 0xA4, /* FAN 5 Duty Cycle, be used to control */
118 0xA5, /* FAN 6 Duty Cycle, be used to control */
119 0xA6 /* FAN 7 Duty Cycle, be used to control */
120};
121#define W83792D_REG_BANK 0x4E
122#define W83792D_REG_TEMP2_CONFIG 0xC2
123#define W83792D_REG_TEMP3_CONFIG 0xCA
124
125static const u8 W83792D_REG_TEMP1[3] = {
126 0x27, /* TEMP 1 in DataSheet */
127 0x39, /* TEMP 1 Over in DataSheet */
128 0x3A, /* TEMP 1 Hyst in DataSheet */
129};
130
131static const u8 W83792D_REG_TEMP_ADD[2][6] = {
132 { 0xC0, /* TEMP 2 in DataSheet */
133 0xC1, /* TEMP 2(0.5 deg) in DataSheet */
134 0xC5, /* TEMP 2 Over High part in DataSheet */
135 0xC6, /* TEMP 2 Over Low part in DataSheet */
136 0xC3, /* TEMP 2 Thyst High part in DataSheet */
137 0xC4 }, /* TEMP 2 Thyst Low part in DataSheet */
138 { 0xC8, /* TEMP 3 in DataSheet */
139 0xC9, /* TEMP 3(0.5 deg) in DataSheet */
140 0xCD, /* TEMP 3 Over High part in DataSheet */
141 0xCE, /* TEMP 3 Over Low part in DataSheet */
142 0xCB, /* TEMP 3 Thyst High part in DataSheet */
143 0xCC } /* TEMP 3 Thyst Low part in DataSheet */
144};
145
146static const u8 W83792D_REG_THERMAL[3] = {
147 0x85, /* SmartFanI: Fan1 target value */
148 0x86, /* SmartFanI: Fan2 target value */
149 0x96 /* SmartFanI: Fan3 target value */
150};
151
152static const u8 W83792D_REG_TOLERANCE[3] = {
153 0x87, /* (bit3-0)SmartFan Fan1 tolerance */
154 0x87, /* (bit7-4)SmartFan Fan2 tolerance */
155 0x97 /* (bit3-0)SmartFan Fan3 tolerance */
156};
157
158static const u8 W83792D_REG_POINTS[3][4] = {
159 { 0x85, /* SmartFanII: Fan1 temp point 1 */
160 0xE3, /* SmartFanII: Fan1 temp point 2 */
161 0xE4, /* SmartFanII: Fan1 temp point 3 */
162 0xE5 }, /* SmartFanII: Fan1 temp point 4 */
163 { 0x86, /* SmartFanII: Fan2 temp point 1 */
164 0xE6, /* SmartFanII: Fan2 temp point 2 */
165 0xE7, /* SmartFanII: Fan2 temp point 3 */
166 0xE8 }, /* SmartFanII: Fan2 temp point 4 */
167 { 0x96, /* SmartFanII: Fan3 temp point 1 */
168 0xE9, /* SmartFanII: Fan3 temp point 2 */
169 0xEA, /* SmartFanII: Fan3 temp point 3 */
170 0xEB } /* SmartFanII: Fan3 temp point 4 */
171};
172
173static const u8 W83792D_REG_LEVELS[3][4] = {
174 { 0x88, /* (bit3-0) SmartFanII: Fan1 Non-Stop */
175 0x88, /* (bit7-4) SmartFanII: Fan1 Level 1 */
176 0xE0, /* (bit7-4) SmartFanII: Fan1 Level 2 */
177 0xE0 }, /* (bit3-0) SmartFanII: Fan1 Level 3 */
178 { 0x89, /* (bit3-0) SmartFanII: Fan2 Non-Stop */
179 0x89, /* (bit7-4) SmartFanII: Fan2 Level 1 */
180 0xE1, /* (bit7-4) SmartFanII: Fan2 Level 2 */
181 0xE1 }, /* (bit3-0) SmartFanII: Fan2 Level 3 */
182 { 0x98, /* (bit3-0) SmartFanII: Fan3 Non-Stop */
183 0x98, /* (bit7-4) SmartFanII: Fan3 Level 1 */
184 0xE2, /* (bit7-4) SmartFanII: Fan3 Level 2 */
185 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */
186};
187
96320519 188#define W83792D_REG_GPIO_EN 0x1A
5563e27d
M		 189#define W83792D_REG_CONFIG 0x40
190#define W83792D_REG_VID_FANDIV 0x47
191#define W83792D_REG_CHIPID 0x49
192#define W83792D_REG_WCHIPID 0x58
193#define W83792D_REG_CHIPMAN 0x4F
194#define W83792D_REG_PIN 0x4B
195#define W83792D_REG_I2C_SUBADDR 0x4A
196
197#define W83792D_REG_ALARM1 0xA9 /* realtime status register1 */
198#define W83792D_REG_ALARM2 0xAA /* realtime status register2 */
199#define W83792D_REG_ALARM3 0xAB /* realtime status register3 */
200#define W83792D_REG_CHASSIS 0x42 /* Bit 5: Case Open status bit */
201#define W83792D_REG_CHASSIS_CLR 0x44 /* Bit 7: Case Open CLR_CHS/Reset bit */
202
203/* control in0/in1 's limit modifiability */
204#define W83792D_REG_VID_IN_B 0x17
205
206#define W83792D_REG_VBAT 0x5D
207#define W83792D_REG_I2C_ADDR 0x48
208
d1743681
GR		 209/*
210 * Conversions. Rounding and limit checking is only done on the TO_REG
211 * variants. Note that you should be a bit careful with which arguments
212 * these macros are called: arguments may be evaluated more than once.
213 * Fixing this is just not worth it.
214 */
215#define IN_FROM_REG(nr, val) (((nr) <= 1) ? ((val) * 2) : \
216 ((((nr) == 6) || ((nr) == 7)) ? ((val) * 6) : ((val) * 4)))
217#define IN_TO_REG(nr, val) (((nr) <= 1) ? ((val) / 2) : \
218 ((((nr) == 6) || ((nr) == 7)) ? ((val) / 6) : ((val) / 4)))
5563e27d
M		 219
220static inline u8
221FAN_TO_REG(long rpm, int div)
222{
223 if (rpm == 0)
224 return 255;
2a844c14
GR		 225 rpm = clamp_val(rpm, 1, 1000000);
226 return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
5563e27d
M		 227}
228
d1743681 229#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : \
5563e27d
M		 230 ((val) == 255 ? 0 : \
231 1350000 / ((val) * (div))))
232
233/* for temp1 */
2a844c14
GR		 234#define TEMP1_TO_REG(val) (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 \
235 : (val)) / 1000, 0, 0xff))
5563e27d 236#define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
25985edc 237/* for temp2 and temp3, because they need additional resolution */
5563e27d
M		 238#define TEMP_ADD_FROM_REG(val1, val2) \
239 ((((val1) & 0x80 ? (val1)-0x100 \
240 : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
241#define TEMP_ADD_TO_REG_HIGH(val) \
2a844c14 242 (clamp_val(((val) < 0 ? (val) + 0x100 * 1000 : (val)) / 1000, 0, 0xff))
5563e27d
M		 243#define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00)
244
5563e27d
M		 245#define DIV_FROM_REG(val) (1 << (val))
246
247static inline u8
248DIV_TO_REG(long val)
249{
250 int i;
2a844c14 251 val = clamp_val(val, 1, 128) >> 1;
96320519 252 for (i = 0; i < 7; i++) {
5563e27d
M		 253 if (val == 0)
254 break;
255 val >>= 1;
256 }
7fe83ad8 257 return (u8)i;
5563e27d
M		 258}
259
260struct w83792d_data {
1beeffe4 261 struct device *hwmon_dev;
5563e27d 262
9a61bf63 263 struct mutex update_lock;
5563e27d
M		 264 char valid; /* !=0 if following fields are valid */
265 unsigned long last_updated; /* In jiffies */
266
267 /* array of 2 pointers to subclients */
268 struct i2c_client *lm75[2];
269
270 u8 in[9]; /* Register value */
271 u8 in_max[9]; /* Register value */
272 u8 in_min[9]; /* Register value */
99d85560 273 u16 low_bits; /* Additional resolution to voltage in6-0 */
5563e27d
M		 274 u8 fan[7]; /* Register value */
275 u8 fan_min[7]; /* Register value */
276 u8 temp1[3]; /* current, over, thyst */
277 u8 temp_add[2][6]; /* Register value */
278 u8 fan_div[7]; /* Register encoding, shifted right */
f617f731 279 u8 pwm[7]; /* The 7 PWM outputs */
5563e27d 280 u8 pwmenable[3];
5563e27d
M		 281 u32 alarms; /* realtime status register encoding,combined */
282 u8 chassis; /* Chassis status */
5563e27d
M		 283 u8 thermal_cruise[3]; /* Smart FanI: Fan1,2,3 target value */
284 u8 tolerance[3]; /* Fan1,2,3 tolerance(Smart Fan I/II) */
285 u8 sf2_points[3][4]; /* Smart FanII: Fan1,2,3 temperature points */
286 u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */
287};
288
31d5d275
JD		 289static int w83792d_probe(struct i2c_client *client,
290 const struct i2c_device_id *id);
310ec792 291static int w83792d_detect(struct i2c_client *client,
31d5d275
JD		 292 struct i2c_board_info *info);
293static int w83792d_remove(struct i2c_client *client);
5563e27d
M		 294static struct w83792d_data *w83792d_update_device(struct device *dev);
295
296#ifdef DEBUG
297static void w83792d_print_debug(struct w83792d_data *data, struct device *dev);
298#endif
299
300static void w83792d_init_client(struct i2c_client *client);
301
31d5d275 302static const struct i2c_device_id w83792d_id[] = {
1f86df49 303 { "w83792d", 0 },
31d5d275
JD		 304 { }
305};
306MODULE_DEVICE_TABLE(i2c, w83792d_id);
307
5563e27d 308static struct i2c_driver w83792d_driver = {
31d5d275 309 .class = I2C_CLASS_HWMON,
cdaf7934 310 .driver = {
cdaf7934
LR		 311 .name = "w83792d",
312 },
31d5d275
JD		 313 .probe = w83792d_probe,
314 .remove = w83792d_remove,
315 .id_table = w83792d_id,
316 .detect = w83792d_detect,
c3813d6a 317 .address_list = normal_i2c,
5563e27d
M		 318};
319
99d85560 320static inline long in_count_from_reg(int nr, struct w83792d_data *data)
5563e27d 321{
99d85560 322 /* in7 and in8 do not have low bits, but the formula still works */
7fe83ad8 323 return (data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03);
5563e27d
M		 324}
325
d1743681
GR		 326/*
327 * The SMBus locks itself. The Winbond W83792D chip has a bank register,
328 * but the driver only accesses registers in bank 0, so we don't have
329 * to switch banks and lock access between switches.
330 */
0d0ab7fe
JD		 331static inline int w83792d_read_value(struct i2c_client *client, u8 reg)
332{
333 return i2c_smbus_read_byte_data(client, reg);
334}
335
336static inline int
337w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
338{
339 return i2c_smbus_write_byte_data(client, reg, value);
340}
341
5563e27d
M		 342/* following are the sysfs callback functions */
343static ssize_t show_in(struct device *dev, struct device_attribute *attr,
344 char *buf)
345{
346 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
347 int nr = sensor_attr->index;
348 struct w83792d_data *data = w83792d_update_device(dev);
d1743681
GR		 349 return sprintf(buf, "%ld\n",
350 IN_FROM_REG(nr, in_count_from_reg(nr, data)));
5563e27d
M		 351}
352
353#define show_in_reg(reg) \
354static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
355 char *buf) \
356{ \
d1743681
GR		 357 struct sensor_device_attribute *sensor_attr \
358 = to_sensor_dev_attr(attr); \
5563e27d
M		 359 int nr = sensor_attr->index; \
360 struct w83792d_data *data = w83792d_update_device(dev); \
d1743681
GR		 361 return sprintf(buf, "%ld\n", \
362 (long)(IN_FROM_REG(nr, data->reg[nr]) * 4)); \
5563e27d
M		 363}
364
365show_in_reg(in_min);
366show_in_reg(in_max);
367
368#define store_in_reg(REG, reg) \
d1743681 369static ssize_t store_in_##reg(struct device *dev, \
5563e27d
M		 370 struct device_attribute *attr, \
371 const char *buf, size_t count) \
372{ \
d1743681
GR		 373 struct sensor_device_attribute *sensor_attr \
374 = to_sensor_dev_attr(attr); \
5563e27d
M		 375 int nr = sensor_attr->index; \
376 struct i2c_client *client = to_i2c_client(dev); \
377 struct w83792d_data *data = i2c_get_clientdata(client); \
d1743681
GR		 378 unsigned long val; \
379 int err = kstrtoul(buf, 10, &val); \
380 if (err) \
381 return err; \
bed73082 382 mutex_lock(&data->update_lock); \
2a844c14 383 data->in_##reg[nr] = clamp_val(IN_TO_REG(nr, val) / 4, 0, 255); \
d1743681
GR		 384 w83792d_write_value(client, W83792D_REG_IN_##REG[nr], \
385 data->in_##reg[nr]); \
bed73082 386 mutex_unlock(&data->update_lock); \
5563e27d
M		 387 \
388 return count; \
389}
390store_in_reg(MIN, min);
391store_in_reg(MAX, max);
392
5563e27d 393#define show_fan_reg(reg) \
d1743681 394static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
5563e27d
M		 395 char *buf) \
396{ \
d1743681
GR		 397 struct sensor_device_attribute *sensor_attr \
398 = to_sensor_dev_attr(attr); \
5563e27d
M		 399 int nr = sensor_attr->index - 1; \
400 struct w83792d_data *data = w83792d_update_device(dev); \
d1743681 401 return sprintf(buf, "%d\n", \
5563e27d
M		 402 FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
403}
404
405show_fan_reg(fan);
406show_fan_reg(fan_min);
407
408static ssize_t
409store_fan_min(struct device *dev, struct device_attribute *attr,
410 const char *buf, size_t count)
411{
412 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
413 int nr = sensor_attr->index - 1;
414 struct i2c_client *client = to_i2c_client(dev);
415 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 416 unsigned long val;
417 int err;
418
419 err = kstrtoul(buf, 10, &val);
420 if (err)
421 return err;
5563e27d 422
bed73082 423 mutex_lock(&data->update_lock);
5563e27d
M		 424 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
425 w83792d_write_value(client, W83792D_REG_FAN_MIN[nr],
426 data->fan_min[nr]);
bed73082 427 mutex_unlock(&data->update_lock);
5563e27d
M		 428
429 return count;
430}
431
432static ssize_t
433show_fan_div(struct device *dev, struct device_attribute *attr,
434 char *buf)
435{
436 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
437 int nr = sensor_attr->index;
438 struct w83792d_data *data = w83792d_update_device(dev);
439 return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr - 1]));
440}
441
d1743681
GR		 442/*
443 * Note: we save and restore the fan minimum here, because its value is
444 * determined in part by the fan divisor. This follows the principle of
445 * least surprise; the user doesn't expect the fan minimum to change just
446 * because the divisor changed.
447 */
5563e27d
M		 448static ssize_t
449store_fan_div(struct device *dev, struct device_attribute *attr,
450 const char *buf, size_t count)
451{
452 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
453 int nr = sensor_attr->index - 1;
454 struct i2c_client *client = to_i2c_client(dev);
455 struct w83792d_data *data = i2c_get_clientdata(client);
456 unsigned long min;
457 /*u8 reg;*/
458 u8 fan_div_reg = 0;
459 u8 tmp_fan_div;
d1743681
GR		 460 unsigned long val;
461 int err;
462
463 err = kstrtoul(buf, 10, &val);
464 if (err)
465 return err;
5563e27d
M		 466
467 /* Save fan_min */
bed73082 468 mutex_lock(&data->update_lock);
5563e27d
M		 469 min = FAN_FROM_REG(data->fan_min[nr],
470 DIV_FROM_REG(data->fan_div[nr]));
471
d1743681 472 data->fan_div[nr] = DIV_TO_REG(val);
5563e27d
M		 473
474 fan_div_reg = w83792d_read_value(client, W83792D_REG_FAN_DIV[nr >> 1]);
475 fan_div_reg &= (nr & 0x01) ? 0x8f : 0xf8;
476 tmp_fan_div = (nr & 0x01) ? (((data->fan_div[nr]) << 4) & 0x70)
477 : ((data->fan_div[nr]) & 0x07);
478 w83792d_write_value(client, W83792D_REG_FAN_DIV[nr >> 1],
479 fan_div_reg | tmp_fan_div);
480
481 /* Restore fan_min */
482 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
483 w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]);
bed73082 484 mutex_unlock(&data->update_lock);
5563e27d
M		 485
486 return count;
487}
488
5563e27d
M		 489/* read/write the temperature1, includes measured value and limits */
490
491static ssize_t show_temp1(struct device *dev, struct device_attribute *attr,
492 char *buf)
493{
494 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
495 int nr = sensor_attr->index;
496 struct w83792d_data *data = w83792d_update_device(dev);
497 return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[nr]));
498}
499
500static ssize_t store_temp1(struct device *dev, struct device_attribute *attr,
501 const char *buf, size_t count)
502{
503 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
504 int nr = sensor_attr->index;
505 struct i2c_client *client = to_i2c_client(dev);
506 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 507 long val;
508 int err;
509
510 err = kstrtol(buf, 10, &val);
511 if (err)
512 return err;
5563e27d 513
bed73082 514 mutex_lock(&data->update_lock);
5563e27d
M		 515 data->temp1[nr] = TEMP1_TO_REG(val);
516 w83792d_write_value(client, W83792D_REG_TEMP1[nr],
517 data->temp1[nr]);
bed73082 518 mutex_unlock(&data->update_lock);
5563e27d
M		 519
520 return count;
521}
522
5563e27d
M		 523/* read/write the temperature2-3, includes measured value and limits */
524
525static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
526 char *buf)
527{
d1743681
GR		 528 struct sensor_device_attribute_2 *sensor_attr
529 = to_sensor_dev_attr_2(attr);
5563e27d
M		 530 int nr = sensor_attr->nr;
531 int index = sensor_attr->index;
532 struct w83792d_data *data = w83792d_update_device(dev);
d1743681 533 return sprintf(buf, "%ld\n",
5563e27d
M		 534 (long)TEMP_ADD_FROM_REG(data->temp_add[nr][index],
535 data->temp_add[nr][index+1]));
536}
537
538static ssize_t store_temp23(struct device *dev, struct device_attribute *attr,
539 const char *buf, size_t count)
540{
d1743681
GR		 541 struct sensor_device_attribute_2 *sensor_attr
542 = to_sensor_dev_attr_2(attr);
5563e27d
M		 543 int nr = sensor_attr->nr;
544 int index = sensor_attr->index;
545 struct i2c_client *client = to_i2c_client(dev);
546 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 547 long val;
548 int err;
549
550 err = kstrtol(buf, 10, &val);
551 if (err)
552 return err;
5563e27d 553
bed73082 554 mutex_lock(&data->update_lock);
5563e27d
M		 555 data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val);
556 data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val);
557 w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index],
558 data->temp_add[nr][index]);
559 w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1],
560 data->temp_add[nr][index+1]);
bed73082 561 mutex_unlock(&data->update_lock);
5563e27d
M		 562
563 return count;
564}
565
84fb029f 566/* get realtime status of all sensors items: voltage, temp, fan */
5563e27d 567static ssize_t
7fe6d2b9 568alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
5563e27d
M		 569{
570 struct w83792d_data *data = w83792d_update_device(dev);
571 return sprintf(buf, "%d\n", data->alarms);
572}
573
43e61a2d
GJ		 574static ssize_t show_alarm(struct device *dev,
575 struct device_attribute *attr, char *buf)
576{
577 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
578 int nr = sensor_attr->index;
579 struct w83792d_data *data = w83792d_update_device(dev);
580 return sprintf(buf, "%d\n", (data->alarms >> nr) & 1);
581}
582
5563e27d
M		 583static ssize_t
584show_pwm(struct device *dev, struct device_attribute *attr,
585 char *buf)
586{
587 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
588 int nr = sensor_attr->index;
589 struct w83792d_data *data = w83792d_update_device(dev);
53e2761b 590 return sprintf(buf, "%d\n", (data->pwm[nr] & 0x0f) << 4);
5563e27d
M		 591}
592
593static ssize_t
594show_pwmenable(struct device *dev, struct device_attribute *attr,
595 char *buf)
596{
597 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
598 int nr = sensor_attr->index - 1;
599 struct w83792d_data *data = w83792d_update_device(dev);
600 long pwm_enable_tmp = 1;
601
602 switch (data->pwmenable[nr]) {
603 case 0:
604 pwm_enable_tmp = 1; /* manual mode */
605 break;
606 case 1:
607 pwm_enable_tmp = 3; /*thermal cruise/Smart Fan I */
608 break;
609 case 2:
610 pwm_enable_tmp = 2; /* Smart Fan II */
611 break;
612 }
613
614 return sprintf(buf, "%ld\n", pwm_enable_tmp);
615}
616
617static ssize_t
618store_pwm(struct device *dev, struct device_attribute *attr,
619 const char *buf, size_t count)
620{
621 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
53e2761b 622 int nr = sensor_attr->index;
5563e27d
M		 623 struct i2c_client *client = to_i2c_client(dev);
624 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 625 unsigned long val;
626 int err;
627
628 err = kstrtoul(buf, 10, &val);
629 if (err)
630 return err;
2a844c14 631 val = clamp_val(val, 0, 255) >> 4;
5563e27d 632
53e2761b
YM		 633 mutex_lock(&data->update_lock);
634 val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0;
635 data->pwm[nr] = val;
5563e27d 636 w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
53e2761b 637 mutex_unlock(&data->update_lock);
5563e27d
M		 638
639 return count;
640}
641
642static ssize_t
643store_pwmenable(struct device *dev, struct device_attribute *attr,
644 const char *buf, size_t count)
645{
646 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
647 int nr = sensor_attr->index - 1;
648 struct i2c_client *client = to_i2c_client(dev);
649 struct w83792d_data *data = i2c_get_clientdata(client);
5563e27d 650 u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp;
d1743681
GR		 651 unsigned long val;
652 int err;
653
654 err = kstrtoul(buf, 10, &val);
655 if (err)
656 return err;
5563e27d 657
bed73082
YM		 658 if (val < 1 || val > 3)
659 return -EINVAL;
660
661 mutex_lock(&data->update_lock);
5563e27d
M		 662 switch (val) {
663 case 1:
664 data->pwmenable[nr] = 0; /* manual mode */
665 break;
666 case 2:
667 data->pwmenable[nr] = 2; /* Smart Fan II */
668 break;
669 case 3:
670 data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */
671 break;
5563e27d
M		 672 }
673 cfg1_tmp = data->pwmenable[0];
674 cfg2_tmp = (data->pwmenable[1]) << 2;
675 cfg3_tmp = (data->pwmenable[2]) << 4;
d1743681 676 cfg4_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG) & 0xc0;
5563e27d
M		 677 fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp;
678 w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp);
bed73082 679 mutex_unlock(&data->update_lock);
5563e27d
M		 680
681 return count;
682}
683
5563e27d
M		 684static ssize_t
685show_pwm_mode(struct device *dev, struct device_attribute *attr,
686 char *buf)
687{
688 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
689 int nr = sensor_attr->index;
690 struct w83792d_data *data = w83792d_update_device(dev);
53e2761b 691 return sprintf(buf, "%d\n", data->pwm[nr] >> 7);
5563e27d
M		 692}
693
694static ssize_t
695store_pwm_mode(struct device *dev, struct device_attribute *attr,
696 const char *buf, size_t count)
697{
698 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
53e2761b 699 int nr = sensor_attr->index;
5563e27d
M		 700 struct i2c_client *client = to_i2c_client(dev);
701 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 702 unsigned long val;
703 int err;
5563e27d 704
d1743681
GR		 705 err = kstrtoul(buf, 10, &val);
706 if (err)
707 return err;
708 if (val > 1)
53e2761b
YM		 709 return -EINVAL;
710
711 mutex_lock(&data->update_lock);
712 data->pwm[nr] = w83792d_read_value(client, W83792D_REG_PWM[nr]);
713 if (val) { /* PWM mode */
714 data->pwm[nr] |= 0x80;
715 } else { /* DC mode */
716 data->pwm[nr] &= 0x7f;
717 }
718 w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
719 mutex_unlock(&data->update_lock);
5563e27d
M		 720
721 return count;
722}
723
5563e27d 724static ssize_t
7fe6d2b9
JL		 725intrusion0_alarm_show(struct device *dev, struct device_attribute *attr,
726 char *buf)
5563e27d
M		 727{
728 struct w83792d_data *data = w83792d_update_device(dev);
729 return sprintf(buf, "%d\n", data->chassis);
730}
731
c32301b5 732static ssize_t
7fe6d2b9
JL		 733intrusion0_alarm_store(struct device *dev, struct device_attribute *attr,
734 const char *buf, size_t count)
c32301b5
JD		 735{
736 struct i2c_client *client = to_i2c_client(dev);
737 struct w83792d_data *data = i2c_get_clientdata(client);
738 unsigned long val;
739 u8 reg;
740
179c4fdb 741 if (kstrtoul(buf, 10, &val) || val != 0)
c32301b5
JD		 742 return -EINVAL;
743
744 mutex_lock(&data->update_lock);
745 reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
746 w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
747 data->valid = 0; /* Force cache refresh */
748 mutex_unlock(&data->update_lock);
749
750 return count;
751}
752
5563e27d
M		 753/* For Smart Fan I / Thermal Cruise */
754static ssize_t
755show_thermal_cruise(struct device *dev, struct device_attribute *attr,
756 char *buf)
757{
758 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
759 int nr = sensor_attr->index;
760 struct w83792d_data *data = w83792d_update_device(dev);
761 return sprintf(buf, "%ld\n", (long)data->thermal_cruise[nr-1]);
762}
763
764static ssize_t
765store_thermal_cruise(struct device *dev, struct device_attribute *attr,
766 const char *buf, size_t count)
767{
768 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
769 int nr = sensor_attr->index - 1;
770 struct i2c_client *client = to_i2c_client(dev);
771 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 772 u8 target_tmp = 0, target_mask = 0;
773 unsigned long val;
774 int err;
775
776 err = kstrtoul(buf, 10, &val);
777 if (err)
778 return err;
5563e27d 779
5563e27d
M		 780 target_tmp = val;
781 target_tmp = target_tmp & 0x7f;
bed73082 782 mutex_lock(&data->update_lock);
d1743681
GR		 783 target_mask = w83792d_read_value(client,
784 W83792D_REG_THERMAL[nr]) & 0x80;
2a844c14 785 data->thermal_cruise[nr] = clamp_val(target_tmp, 0, 255);
5563e27d
M		 786 w83792d_write_value(client, W83792D_REG_THERMAL[nr],
787 (data->thermal_cruise[nr]) | target_mask);
bed73082 788 mutex_unlock(&data->update_lock);
5563e27d
M		 789
790 return count;
791}
792
5563e27d
M		 793/* For Smart Fan I/Thermal Cruise and Smart Fan II */
794static ssize_t
795show_tolerance(struct device *dev, struct device_attribute *attr,
796 char *buf)
797{
798 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
799 int nr = sensor_attr->index;
800 struct w83792d_data *data = w83792d_update_device(dev);
801 return sprintf(buf, "%ld\n", (long)data->tolerance[nr-1]);
802}
803
804static ssize_t
805store_tolerance(struct device *dev, struct device_attribute *attr,
806 const char *buf, size_t count)
807{
808 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
809 int nr = sensor_attr->index - 1;
810 struct i2c_client *client = to_i2c_client(dev);
811 struct w83792d_data *data = i2c_get_clientdata(client);
5563e27d 812 u8 tol_tmp, tol_mask;
d1743681
GR		 813 unsigned long val;
814 int err;
815
816 err = kstrtoul(buf, 10, &val);
817 if (err)
818 return err;
5563e27d 819
bed73082 820 mutex_lock(&data->update_lock);
5563e27d
M		 821 tol_mask = w83792d_read_value(client,
822 W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
2a844c14 823 tol_tmp = clamp_val(val, 0, 15);
5563e27d
M		 824 tol_tmp &= 0x0f;
825 data->tolerance[nr] = tol_tmp;
d1743681 826 if (nr == 1)
5563e27d 827 tol_tmp <<= 4;
5563e27d
M		 828 w83792d_write_value(client, W83792D_REG_TOLERANCE[nr],
829 tol_mask | tol_tmp);
bed73082 830 mutex_unlock(&data->update_lock);
5563e27d
M		 831
832 return count;
833}
834
5563e27d
M		 835/* For Smart Fan II */
836static ssize_t
837show_sf2_point(struct device *dev, struct device_attribute *attr,
838 char *buf)
839{
d1743681
GR		 840 struct sensor_device_attribute_2 *sensor_attr
841 = to_sensor_dev_attr_2(attr);
5563e27d
M		 842 int nr = sensor_attr->nr;
843 int index = sensor_attr->index;
844 struct w83792d_data *data = w83792d_update_device(dev);
845 return sprintf(buf, "%ld\n", (long)data->sf2_points[index-1][nr-1]);
846}
847
848static ssize_t
849store_sf2_point(struct device *dev, struct device_attribute *attr,
850 const char *buf, size_t count)
851{
d1743681
GR		 852 struct sensor_device_attribute_2 *sensor_attr
853 = to_sensor_dev_attr_2(attr);
5563e27d
M		 854 int nr = sensor_attr->nr - 1;
855 int index = sensor_attr->index - 1;
856 struct i2c_client *client = to_i2c_client(dev);
857 struct w83792d_data *data = i2c_get_clientdata(client);
5563e27d 858 u8 mask_tmp = 0;
d1743681
GR		 859 unsigned long val;
860 int err;
861
862 err = kstrtoul(buf, 10, &val);
863 if (err)
864 return err;
5563e27d 865
bed73082 866 mutex_lock(&data->update_lock);
2a844c14 867 data->sf2_points[index][nr] = clamp_val(val, 0, 127);
5563e27d
M		 868 mask_tmp = w83792d_read_value(client,
869 W83792D_REG_POINTS[index][nr]) & 0x80;
870 w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
871 mask_tmp|data->sf2_points[index][nr]);
bed73082 872 mutex_unlock(&data->update_lock);
5563e27d
M		 873
874 return count;
875}
876
5563e27d
M		 877static ssize_t
878show_sf2_level(struct device *dev, struct device_attribute *attr,
879 char *buf)
880{
d1743681
GR		 881 struct sensor_device_attribute_2 *sensor_attr
882 = to_sensor_dev_attr_2(attr);
5563e27d
M		 883 int nr = sensor_attr->nr;
884 int index = sensor_attr->index;
885 struct w83792d_data *data = w83792d_update_device(dev);
886 return sprintf(buf, "%d\n",
887 (((data->sf2_levels[index-1][nr]) * 100) / 15));
888}
889
890static ssize_t
891store_sf2_level(struct device *dev, struct device_attribute *attr,
892 const char *buf, size_t count)
893{
d1743681
GR		 894 struct sensor_device_attribute_2 *sensor_attr
895 = to_sensor_dev_attr_2(attr);
5563e27d
M		 896 int nr = sensor_attr->nr;
897 int index = sensor_attr->index - 1;
898 struct i2c_client *client = to_i2c_client(dev);
899 struct w83792d_data *data = i2c_get_clientdata(client);
d1743681
GR		 900 u8 mask_tmp = 0, level_tmp = 0;
901 unsigned long val;
902 int err;
903
904 err = kstrtoul(buf, 10, &val);
905 if (err)
906 return err;
5563e27d 907
bed73082 908 mutex_lock(&data->update_lock);
2a844c14 909 data->sf2_levels[index][nr] = clamp_val((val * 15) / 100, 0, 15);
5563e27d 910 mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
d1743681
GR		 911 & ((nr == 3) ? 0xf0 : 0x0f);
912 if (nr == 3)
5563e27d 913 level_tmp = data->sf2_levels[index][nr];
d1743681 914 else
5563e27d 915 level_tmp = data->sf2_levels[index][nr] << 4;
d1743681
GR		 916 w83792d_write_value(client, W83792D_REG_LEVELS[index][nr],
917 level_tmp | mask_tmp);
bed73082 918 mutex_unlock(&data->update_lock);
5563e27d
M		 919
920 return count;
921}
922
5563e27d
M		 923
924static int
31d5d275 925w83792d_detect_subclients(struct i2c_client *new_client)
5563e27d 926{
f6421115 927 int i, id;
31d5d275 928 int address = new_client->addr;
5563e27d 929 u8 val;
31d5d275 930 struct i2c_adapter *adapter = new_client->adapter;
5563e27d
M		 931 struct w83792d_data *data = i2c_get_clientdata(new_client);
932
933 id = i2c_adapter_id(adapter);
934 if (force_subclients[0] == id && force_subclients[1] == address) {
935 for (i = 2; i <= 3; i++) {
936 if (force_subclients[i] < 0x48 ||
937 force_subclients[i] > 0x4f) {
b55f3757
GR		 938 dev_err(&new_client->dev,
939 "invalid subclient address %d; must be 0x48-0x4f\n",
5563e27d 940 force_subclients[i]);
f6421115 941 return -ENODEV;
5563e27d
M		 942 }
943 }
944 w83792d_write_value(new_client, W83792D_REG_I2C_SUBADDR,
945 (force_subclients[2] & 0x07) |
946 ((force_subclients[3] & 0x07) << 4));
947 }
948
949 val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
d1743681 950 if (!(val & 0x08))
f6421115
WS		 951 data->lm75[0] = devm_i2c_new_dummy_device(&new_client->dev, adapter,
952 0x48 + (val & 0x7));
5563e27d 953 if (!(val & 0x80)) {
f6421115 954 if (!IS_ERR(data->lm75[0]) &&
5563e27d 955 ((val & 0x7) == ((val >> 4) & 0x7))) {
b55f3757
GR		 956 dev_err(&new_client->dev,
957 "duplicate addresses 0x%x, use force_subclient\n",
958 data->lm75[0]->addr);
f6421115 959 return -ENODEV;
5563e27d 960 }
f6421115
WS		 961 data->lm75[1] = devm_i2c_new_dummy_device(&new_client->dev, adapter,
962 0x48 + ((val >> 4) & 0x7));
5563e27d
M		 963 }
964
965 return 0;
5563e27d
M		 966}
967
f52f79da
RM		 968static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
969static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
970static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
971static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
972static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
973static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5);
974static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6);
975static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7);
976static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8);
977static SENSOR_DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO,
978 show_in_min, store_in_min, 0);
979static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO,
980 show_in_min, store_in_min, 1);
981static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO,
982 show_in_min, store_in_min, 2);
983static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO,
984 show_in_min, store_in_min, 3);
985static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO,
986 show_in_min, store_in_min, 4);
987static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO,
988 show_in_min, store_in_min, 5);
989static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO,
990 show_in_min, store_in_min, 6);
991static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO,
992 show_in_min, store_in_min, 7);
993static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO,
994 show_in_min, store_in_min, 8);
995static SENSOR_DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO,
996 show_in_max, store_in_max, 0);
997static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO,
998 show_in_max, store_in_max, 1);
999static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO,
1000 show_in_max, store_in_max, 2);
1001static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO,
1002 show_in_max, store_in_max, 3);
1003static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO,
1004 show_in_max, store_in_max, 4);
1005static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO,
1006 show_in_max, store_in_max, 5);
1007static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO,
1008 show_in_max, store_in_max, 6);
1009static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO,
1010 show_in_max, store_in_max, 7);
1011static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO,
1012 show_in_max, store_in_max, 8);
1013static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0);
1014static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0);
1015static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0);
1016static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR,
1017 show_temp1, store_temp1, 0, 1);
1018static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23,
1019 store_temp23, 0, 2);
1020static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23,
1021 store_temp23, 1, 2);
1022static SENSOR_DEVICE_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR,
1023 show_temp1, store_temp1, 0, 2);
1024static SENSOR_DEVICE_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR,
1025 show_temp23, store_temp23, 0, 4);
1026static SENSOR_DEVICE_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR,
1027 show_temp23, store_temp23, 1, 4);
7fe6d2b9 1028static DEVICE_ATTR_RO(alarms);
43e61a2d
GJ		 1029static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
1030static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
1031static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 2);
1032static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 3);
1033static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 4);
1034static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
1035static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
1036static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 7);
1037static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 8);
1038static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 9);
1039static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 10);
1040static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 11);
1041static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 12);
1042static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, 15);
1043static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19);
1044static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20);
1045static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21);
1046static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
1047static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
7fe6d2b9 1048static DEVICE_ATTR_RW(intrusion0_alarm);
f52f79da
RM		 1049static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
1050static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
1051static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
f617f731
RL		 1052static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3);
1053static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 4);
1054static SENSOR_DEVICE_ATTR(pwm6, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 5);
1055static SENSOR_DEVICE_ATTR(pwm7, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 6);
f52f79da
RM		 1056static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
1057 show_pwmenable, store_pwmenable, 1);
1058static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
1059 show_pwmenable, store_pwmenable, 2);
1060static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
1061 show_pwmenable, store_pwmenable, 3);
1062static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO,
1063 show_pwm_mode, store_pwm_mode, 0);
1064static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
1065 show_pwm_mode, store_pwm_mode, 1);
1066static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
1067 show_pwm_mode, store_pwm_mode, 2);
f617f731
RL		 1068static SENSOR_DEVICE_ATTR(pwm4_mode, S_IWUSR | S_IRUGO,
1069 show_pwm_mode, store_pwm_mode, 3);
1070static SENSOR_DEVICE_ATTR(pwm5_mode, S_IWUSR | S_IRUGO,
1071 show_pwm_mode, store_pwm_mode, 4);
1072static SENSOR_DEVICE_ATTR(pwm6_mode, S_IWUSR | S_IRUGO,
1073 show_pwm_mode, store_pwm_mode, 5);
1074static SENSOR_DEVICE_ATTR(pwm7_mode, S_IWUSR | S_IRUGO,
1075 show_pwm_mode, store_pwm_mode, 6);
f52f79da
RM		 1076static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO,
1077 show_tolerance, store_tolerance, 1);
1078static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO,
1079 show_tolerance, store_tolerance, 2);
1080static SENSOR_DEVICE_ATTR(tolerance3, S_IWUSR | S_IRUGO,
1081 show_tolerance, store_tolerance, 3);
1082static SENSOR_DEVICE_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO,
1083 show_thermal_cruise, store_thermal_cruise, 1);
1084static SENSOR_DEVICE_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO,
1085 show_thermal_cruise, store_thermal_cruise, 2);
1086static SENSOR_DEVICE_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO,
1087 show_thermal_cruise, store_thermal_cruise, 3);
1088static SENSOR_DEVICE_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR,
1089 show_sf2_point, store_sf2_point, 1, 1);
1090static SENSOR_DEVICE_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR,
1091 show_sf2_point, store_sf2_point, 2, 1);
1092static SENSOR_DEVICE_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR,
1093 show_sf2_point, store_sf2_point, 3, 1);
1094static SENSOR_DEVICE_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR,
1095 show_sf2_point, store_sf2_point, 4, 1);
1096static SENSOR_DEVICE_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR,
1097 show_sf2_point, store_sf2_point, 1, 2);
1098static SENSOR_DEVICE_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR,
1099 show_sf2_point, store_sf2_point, 2, 2);
1100static SENSOR_DEVICE_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR,
1101 show_sf2_point, store_sf2_point, 3, 2);
1102static SENSOR_DEVICE_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR,
1103 show_sf2_point, store_sf2_point, 4, 2);
1104static SENSOR_DEVICE_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR,
1105 show_sf2_point, store_sf2_point, 1, 3);
1106static SENSOR_DEVICE_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR,
1107 show_sf2_point, store_sf2_point, 2, 3);
1108static SENSOR_DEVICE_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR,
1109 show_sf2_point, store_sf2_point, 3, 3);
1110static SENSOR_DEVICE_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR,
1111 show_sf2_point, store_sf2_point, 4, 3);
1112static SENSOR_DEVICE_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR,
1113 show_sf2_level, store_sf2_level, 1, 1);
1114static SENSOR_DEVICE_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR,
1115 show_sf2_level, store_sf2_level, 2, 1);
1116static SENSOR_DEVICE_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR,
1117 show_sf2_level, store_sf2_level, 3, 1);
1118static SENSOR_DEVICE_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR,
1119 show_sf2_level, store_sf2_level, 1, 2);
1120static SENSOR_DEVICE_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR,
1121 show_sf2_level, store_sf2_level, 2, 2);
1122static SENSOR_DEVICE_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR,
1123 show_sf2_level, store_sf2_level, 3, 2);
1124static SENSOR_DEVICE_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR,
1125 show_sf2_level, store_sf2_level, 1, 3);
1126static SENSOR_DEVICE_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR,
1127 show_sf2_level, store_sf2_level, 2, 3);
1128static SENSOR_DEVICE_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR,
1129 show_sf2_level, store_sf2_level, 3, 3);
1130static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1);
1131static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2);
1132static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3);
1133static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4);
1134static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5);
1135static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6);
1136static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7);
1137static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
1138 show_fan_min, store_fan_min, 1);
1139static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
1140 show_fan_min, store_fan_min, 2);
1141static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
1142 show_fan_min, store_fan_min, 3);
1143static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
1144 show_fan_min, store_fan_min, 4);
1145static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
1146 show_fan_min, store_fan_min, 5);
1147static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
1148 show_fan_min, store_fan_min, 6);
1149static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
1150 show_fan_min, store_fan_min, 7);
1151static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO,
1152 show_fan_div, store_fan_div, 1);
1153static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO,
1154 show_fan_div, store_fan_div, 2);
1155static SENSOR_DEVICE_ATTR(fan3_div, S_IWUSR | S_IRUGO,
1156 show_fan_div, store_fan_div, 3);
1157static SENSOR_DEVICE_ATTR(fan4_div, S_IWUSR | S_IRUGO,
1158 show_fan_div, store_fan_div, 4);
1159static SENSOR_DEVICE_ATTR(fan5_div, S_IWUSR | S_IRUGO,
1160 show_fan_div, store_fan_div, 5);
1161static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO,
1162 show_fan_div, store_fan_div, 6);
1163static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO,
1164 show_fan_div, store_fan_div, 7);
1165
f617f731 1166static struct attribute *w83792d_attributes_fan[4][7] = {
f52f79da
RM		 1167 {
1168 &sensor_dev_attr_fan4_input.dev_attr.attr,
1169 &sensor_dev_attr_fan4_min.dev_attr.attr,
1170 &sensor_dev_attr_fan4_div.dev_attr.attr,
43e61a2d 1171 &sensor_dev_attr_fan4_alarm.dev_attr.attr,
f617f731
RL		 1172 &sensor_dev_attr_pwm4.dev_attr.attr,
1173 &sensor_dev_attr_pwm4_mode.dev_attr.attr,
f52f79da
RM		 1174 NULL
1175 }, {
1176 &sensor_dev_attr_fan5_input.dev_attr.attr,
1177 &sensor_dev_attr_fan5_min.dev_attr.attr,
1178 &sensor_dev_attr_fan5_div.dev_attr.attr,
43e61a2d 1179 &sensor_dev_attr_fan5_alarm.dev_attr.attr,
f617f731
RL		 1180 &sensor_dev_attr_pwm5.dev_attr.attr,
1181 &sensor_dev_attr_pwm5_mode.dev_attr.attr,
f52f79da
RM		 1182 NULL
1183 }, {
1184 &sensor_dev_attr_fan6_input.dev_attr.attr,
1185 &sensor_dev_attr_fan6_min.dev_attr.attr,
1186 &sensor_dev_attr_fan6_div.dev_attr.attr,
43e61a2d 1187 &sensor_dev_attr_fan6_alarm.dev_attr.attr,
f617f731
RL		 1188 &sensor_dev_attr_pwm6.dev_attr.attr,
1189 &sensor_dev_attr_pwm6_mode.dev_attr.attr,
f52f79da
RM		 1190 NULL
1191 }, {
1192 &sensor_dev_attr_fan7_input.dev_attr.attr,
1193 &sensor_dev_attr_fan7_min.dev_attr.attr,
1194 &sensor_dev_attr_fan7_div.dev_attr.attr,
43e61a2d 1195 &sensor_dev_attr_fan7_alarm.dev_attr.attr,
f617f731
RL		 1196 &sensor_dev_attr_pwm7.dev_attr.attr,
1197 &sensor_dev_attr_pwm7_mode.dev_attr.attr,
f52f79da
RM		 1198 NULL
1199 }
1200};
1201
1202static const struct attribute_group w83792d_group_fan[4] = {
1203 { .attrs = w83792d_attributes_fan[0] },
1204 { .attrs = w83792d_attributes_fan[1] },
1205 { .attrs = w83792d_attributes_fan[2] },
1206 { .attrs = w83792d_attributes_fan[3] },
1207};
1208
1209static struct attribute *w83792d_attributes[] = {
1210 &sensor_dev_attr_in0_input.dev_attr.attr,
1211 &sensor_dev_attr_in0_max.dev_attr.attr,
1212 &sensor_dev_attr_in0_min.dev_attr.attr,
1213 &sensor_dev_attr_in1_input.dev_attr.attr,
1214 &sensor_dev_attr_in1_max.dev_attr.attr,
1215 &sensor_dev_attr_in1_min.dev_attr.attr,
1216 &sensor_dev_attr_in2_input.dev_attr.attr,
1217 &sensor_dev_attr_in2_max.dev_attr.attr,
1218 &sensor_dev_attr_in2_min.dev_attr.attr,
1219 &sensor_dev_attr_in3_input.dev_attr.attr,
1220 &sensor_dev_attr_in3_max.dev_attr.attr,
1221 &sensor_dev_attr_in3_min.dev_attr.attr,
1222 &sensor_dev_attr_in4_input.dev_attr.attr,
1223 &sensor_dev_attr_in4_max.dev_attr.attr,
1224 &sensor_dev_attr_in4_min.dev_attr.attr,
1225 &sensor_dev_attr_in5_input.dev_attr.attr,
1226 &sensor_dev_attr_in5_max.dev_attr.attr,
1227 &sensor_dev_attr_in5_min.dev_attr.attr,
1228 &sensor_dev_attr_in6_input.dev_attr.attr,
1229 &sensor_dev_attr_in6_max.dev_attr.attr,
1230 &sensor_dev_attr_in6_min.dev_attr.attr,
1231 &sensor_dev_attr_in7_input.dev_attr.attr,
1232 &sensor_dev_attr_in7_max.dev_attr.attr,
1233 &sensor_dev_attr_in7_min.dev_attr.attr,
1234 &sensor_dev_attr_in8_input.dev_attr.attr,
1235 &sensor_dev_attr_in8_max.dev_attr.attr,
1236 &sensor_dev_attr_in8_min.dev_attr.attr,
43e61a2d
GJ		 1237 &sensor_dev_attr_in0_alarm.dev_attr.attr,
1238 &sensor_dev_attr_in1_alarm.dev_attr.attr,
1239 &sensor_dev_attr_in2_alarm.dev_attr.attr,
1240 &sensor_dev_attr_in3_alarm.dev_attr.attr,
1241 &sensor_dev_attr_in4_alarm.dev_attr.attr,
1242 &sensor_dev_attr_in5_alarm.dev_attr.attr,
1243 &sensor_dev_attr_in6_alarm.dev_attr.attr,
1244 &sensor_dev_attr_in7_alarm.dev_attr.attr,
1245 &sensor_dev_attr_in8_alarm.dev_attr.attr,
f52f79da
RM		 1246 &sensor_dev_attr_temp1_input.dev_attr.attr,
1247 &sensor_dev_attr_temp1_max.dev_attr.attr,
1248 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
1249 &sensor_dev_attr_temp2_input.dev_attr.attr,
1250 &sensor_dev_attr_temp2_max.dev_attr.attr,
1251 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
1252 &sensor_dev_attr_temp3_input.dev_attr.attr,
1253 &sensor_dev_attr_temp3_max.dev_attr.attr,
1254 &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
43e61a2d
GJ		 1255 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1256 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1257 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
f52f79da
RM		 1258 &sensor_dev_attr_pwm1.dev_attr.attr,
1259 &sensor_dev_attr_pwm1_mode.dev_attr.attr,
1260 &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1261 &sensor_dev_attr_pwm2.dev_attr.attr,
1262 &sensor_dev_attr_pwm2_mode.dev_attr.attr,
1263 &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1264 &sensor_dev_attr_pwm3.dev_attr.attr,
1265 &sensor_dev_attr_pwm3_mode.dev_attr.attr,
1266 &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1267 &dev_attr_alarms.attr,
c32301b5 1268 &dev_attr_intrusion0_alarm.attr,
f52f79da
RM		 1269 &sensor_dev_attr_tolerance1.dev_attr.attr,
1270 &sensor_dev_attr_thermal_cruise1.dev_attr.attr,
1271 &sensor_dev_attr_tolerance2.dev_attr.attr,
1272 &sensor_dev_attr_thermal_cruise2.dev_attr.attr,
1273 &sensor_dev_attr_tolerance3.dev_attr.attr,
1274 &sensor_dev_attr_thermal_cruise3.dev_attr.attr,
1275 &sensor_dev_attr_sf2_point1_fan1.dev_attr.attr,
1276 &sensor_dev_attr_sf2_point2_fan1.dev_attr.attr,
1277 &sensor_dev_attr_sf2_point3_fan1.dev_attr.attr,
1278 &sensor_dev_attr_sf2_point4_fan1.dev_attr.attr,
1279 &sensor_dev_attr_sf2_point1_fan2.dev_attr.attr,
1280 &sensor_dev_attr_sf2_point2_fan2.dev_attr.attr,
1281 &sensor_dev_attr_sf2_point3_fan2.dev_attr.attr,
1282 &sensor_dev_attr_sf2_point4_fan2.dev_attr.attr,
1283 &sensor_dev_attr_sf2_point1_fan3.dev_attr.attr,
1284 &sensor_dev_attr_sf2_point2_fan3.dev_attr.attr,
1285 &sensor_dev_attr_sf2_point3_fan3.dev_attr.attr,
1286 &sensor_dev_attr_sf2_point4_fan3.dev_attr.attr,
1287 &sensor_dev_attr_sf2_level1_fan1.dev_attr.attr,
1288 &sensor_dev_attr_sf2_level2_fan1.dev_attr.attr,
1289 &sensor_dev_attr_sf2_level3_fan1.dev_attr.attr,
1290 &sensor_dev_attr_sf2_level1_fan2.dev_attr.attr,
1291 &sensor_dev_attr_sf2_level2_fan2.dev_attr.attr,
1292 &sensor_dev_attr_sf2_level3_fan2.dev_attr.attr,
1293 &sensor_dev_attr_sf2_level1_fan3.dev_attr.attr,
1294 &sensor_dev_attr_sf2_level2_fan3.dev_attr.attr,
1295 &sensor_dev_attr_sf2_level3_fan3.dev_attr.attr,
1296 &sensor_dev_attr_fan1_input.dev_attr.attr,
1297 &sensor_dev_attr_fan1_min.dev_attr.attr,
1298 &sensor_dev_attr_fan1_div.dev_attr.attr,
43e61a2d 1299 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
f52f79da
RM		 1300 &sensor_dev_attr_fan2_input.dev_attr.attr,
1301 &sensor_dev_attr_fan2_min.dev_attr.attr,
1302 &sensor_dev_attr_fan2_div.dev_attr.attr,
43e61a2d 1303 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
f52f79da
RM		 1304 &sensor_dev_attr_fan3_input.dev_attr.attr,
1305 &sensor_dev_attr_fan3_min.dev_attr.attr,
1306 &sensor_dev_attr_fan3_div.dev_attr.attr,
43e61a2d 1307 &sensor_dev_attr_fan3_alarm.dev_attr.attr,
f52f79da
RM		 1308 NULL
1309};
1310
1311static const struct attribute_group w83792d_group = {
1312 .attrs = w83792d_attributes,
1313};
5563e27d 1314
31d5d275 1315/* Return 0 if detection is successful, -ENODEV otherwise */
5563e27d 1316static int
310ec792 1317w83792d_detect(struct i2c_client *client, struct i2c_board_info *info)
5563e27d 1318{
31d5d275
JD		 1319 struct i2c_adapter *adapter = client->adapter;
1320 int val1, val2;
1321 unsigned short address = client->addr;
5563e27d 1322
d1743681 1323 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
31d5d275 1324 return -ENODEV;
5563e27d 1325
2de1875a
JD		 1326 if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
1327 return -ENODEV;
1328
1329 val1 = w83792d_read_value(client, W83792D_REG_BANK);
1330 val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1331 /* Check for Winbond ID if in bank 0 */
1332 if (!(val1 & 0x07)) { /* is Bank0 */
1333 if ((!(val1 & 0x80) && val2 != 0xa3) ||
d1743681 1334 ((val1 & 0x80) && val2 != 0x5c))
31d5d275 1335 return -ENODEV;
5563e27d 1336 }
d1743681
GR		 1337 /*
1338 * If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
1339 * should match
1340 */
2de1875a
JD		 1341 if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
1342 return -ENODEV;
5563e27d 1343
2de1875a 1344 /* Put it now into bank 0 and Vendor ID High Byte */
1f8dae31 1345 w83792d_write_value(client,
5563e27d 1346 W83792D_REG_BANK,
1f8dae31 1347 (w83792d_read_value(client,
5563e27d
M		 1348 W83792D_REG_BANK) & 0x78) | 0x80);
1349
1350 /* Determine the chip type. */
2de1875a
JD		 1351 val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
1352 val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
1353 if (val1 != 0x7a || val2 != 0x5c)
1354 return -ENODEV;
5563e27d 1355
31d5d275
JD		 1356 strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
1357
1358 return 0;
1359}
1360
1361static int
1362w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1363{
1364 struct w83792d_data *data;
1365 struct device *dev = &client->dev;
1366 int i, val1, err;
5563e27d 1367
140849e1
GR		 1368 data = devm_kzalloc(dev, sizeof(struct w83792d_data), GFP_KERNEL);
1369 if (!data)
1370 return -ENOMEM;
5563e27d 1371
31d5d275 1372 i2c_set_clientdata(client, data);
9a61bf63 1373 mutex_init(&data->update_lock);
5563e27d 1374
31d5d275
JD		 1375 err = w83792d_detect_subclients(client);
1376 if (err)
140849e1 1377 return err;
5563e27d 1378
5563e27d 1379 /* Initialize the chip */
1f8dae31 1380 w83792d_init_client(client);
5563e27d
M		 1381
1382 /* A few vars need to be filled upon startup */
96320519 1383 for (i = 0; i < 7; i++) {
1f8dae31 1384 data->fan_min[i] = w83792d_read_value(client,
5563e27d
M		 1385 W83792D_REG_FAN_MIN[i]);
1386 }
1387
1388 /* Register sysfs hooks */
d1743681
GR		 1389 err = sysfs_create_group(&dev->kobj, &w83792d_group);
1390 if (err)
f6421115 1391 return err;
96320519 1392
d1743681
GR		 1393 /*
1394 * Read GPIO enable register to check if pins for fan 4,5 are used as
1395 * GPIO
1396 */
1f8dae31 1397 val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN);
f52f79da 1398
d1743681
GR		 1399 if (!(val1 & 0x40)) {
1400 err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[0]);
1401 if (err)
f52f79da 1402 goto exit_remove_files;
d1743681 1403 }
f52f79da 1404
d1743681
GR		 1405 if (!(val1 & 0x20)) {
1406 err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[1]);
1407 if (err)
f52f79da 1408 goto exit_remove_files;
d1743681 1409 }
96320519 1410
1f8dae31 1411 val1 = w83792d_read_value(client, W83792D_REG_PIN);
d1743681
GR		 1412 if (val1 & 0x40) {
1413 err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[2]);
1414 if (err)
f52f79da 1415 goto exit_remove_files;
d1743681 1416 }
f52f79da 1417
d1743681
GR		 1418 if (val1 & 0x04) {
1419 err = sysfs_create_group(&dev->kobj, &w83792d_group_fan[3]);
1420 if (err)
f52f79da 1421 goto exit_remove_files;
d1743681 1422 }
1f8dae31 1423
1beeffe4
TJ		 1424 data->hwmon_dev = hwmon_device_register(dev);
1425 if (IS_ERR(data->hwmon_dev)) {
1426 err = PTR_ERR(data->hwmon_dev);
f52f79da 1427 goto exit_remove_files;
1f8dae31
YM		 1428 }
1429
5563e27d
M		 1430 return 0;
1431
f52f79da
RM		 1432exit_remove_files:
1433 sysfs_remove_group(&dev->kobj, &w83792d_group);
1434 for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1435 sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]);
5563e27d
M		 1436 return err;
1437}
1438
1439static int
31d5d275 1440w83792d_remove(struct i2c_client *client)
5563e27d 1441{
ce785ab4 1442 struct w83792d_data *data = i2c_get_clientdata(client);
31d5d275 1443 int i;
ce785ab4 1444
31d5d275
JD		 1445 hwmon_device_unregister(data->hwmon_dev);
1446 sysfs_remove_group(&client->dev.kobj, &w83792d_group);
1447 for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++)
1448 sysfs_remove_group(&client->dev.kobj,
1449 &w83792d_group_fan[i]);
5563e27d 1450
5563e27d
M		 1451 return 0;
1452}
1453
5563e27d
M		 1454static void
1455w83792d_init_client(struct i2c_client *client)
1456{
1457 u8 temp2_cfg, temp3_cfg, vid_in_b;
1458
d1743681 1459 if (init)
5563e27d 1460 w83792d_write_value(client, W83792D_REG_CONFIG, 0x80);
d1743681
GR		 1461
1462 /*
1463 * Clear the bit6 of W83792D_REG_VID_IN_B(set it into 0):
1464 * W83792D_REG_VID_IN_B bit6 = 0: the high/low limit of
1465 * vin0/vin1 can be modified by user;
1466 * W83792D_REG_VID_IN_B bit6 = 1: the high/low limit of
1467 * vin0/vin1 auto-updated, can NOT be modified by user.
1468 */
5563e27d
M		 1469 vid_in_b = w83792d_read_value(client, W83792D_REG_VID_IN_B);
1470 w83792d_write_value(client, W83792D_REG_VID_IN_B,
1471 vid_in_b & 0xbf);
1472
1473 temp2_cfg = w83792d_read_value(client, W83792D_REG_TEMP2_CONFIG);
1474 temp3_cfg = w83792d_read_value(client, W83792D_REG_TEMP3_CONFIG);
1475 w83792d_write_value(client, W83792D_REG_TEMP2_CONFIG,
1476 temp2_cfg & 0xe6);
1477 w83792d_write_value(client, W83792D_REG_TEMP3_CONFIG,
1478 temp3_cfg & 0xe6);
1479
1480 /* Start monitoring */
1481 w83792d_write_value(client, W83792D_REG_CONFIG,
1482 (w83792d_read_value(client,
1483 W83792D_REG_CONFIG) & 0xf7)
1484 | 0x01);
1485}
1486
1487static struct w83792d_data *w83792d_update_device(struct device *dev)
1488{
1489 struct i2c_client *client = to_i2c_client(dev);
1490 struct w83792d_data *data = i2c_get_clientdata(client);
1491 int i, j;
53e2761b 1492 u8 reg_array_tmp[4], reg_tmp;
5563e27d 1493
9a61bf63 1494 mutex_lock(&data->update_lock);
5563e27d
M		 1495
1496 if (time_after
1497 (jiffies - data->last_updated, (unsigned long) (HZ * 3))
1498 || time_before(jiffies, data->last_updated) || !data->valid) {
1499 dev_dbg(dev, "Starting device update\n");
1500
1501 /* Update the voltages measured value and limits */
1502 for (i = 0; i < 9; i++) {
1503 data->in[i] = w83792d_read_value(client,
1504 W83792D_REG_IN[i]);
1505 data->in_max[i] = w83792d_read_value(client,
1506 W83792D_REG_IN_MAX[i]);
1507 data->in_min[i] = w83792d_read_value(client,
1508 W83792D_REG_IN_MIN[i]);
1509 }
99d85560
JD		 1510 data->low_bits = w83792d_read_value(client,
1511 W83792D_REG_LOW_BITS1) +
1512 (w83792d_read_value(client,
1513 W83792D_REG_LOW_BITS2) << 8);
5563e27d
M		 1514 for (i = 0; i < 7; i++) {
1515 /* Update the Fan measured value and limits */
1516 data->fan[i] = w83792d_read_value(client,
1517 W83792D_REG_FAN[i]);
1518 data->fan_min[i] = w83792d_read_value(client,
1519 W83792D_REG_FAN_MIN[i]);
1520 /* Update the PWM/DC Value and PWM/DC flag */
53e2761b 1521 data->pwm[i] = w83792d_read_value(client,
5563e27d 1522 W83792D_REG_PWM[i]);
5563e27d
M		 1523 }
1524
1525 reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
1526 data->pwmenable[0] = reg_tmp & 0x03;
1527 data->pwmenable[1] = (reg_tmp>>2) & 0x03;
1528 data->pwmenable[2] = (reg_tmp>>4) & 0x03;
1529
1530 for (i = 0; i < 3; i++) {
1531 data->temp1[i] = w83792d_read_value(client,
1532 W83792D_REG_TEMP1[i]);
1533 }
1534 for (i = 0; i < 2; i++) {
1535 for (j = 0; j < 6; j++) {
1536 data->temp_add[i][j] = w83792d_read_value(
d1743681 1537 client, W83792D_REG_TEMP_ADD[i][j]);
5563e27d
M		 1538 }
1539 }
1540
1541 /* Update the Fan Divisor */
1542 for (i = 0; i < 4; i++) {
1543 reg_array_tmp[i] = w83792d_read_value(client,
1544 W83792D_REG_FAN_DIV[i]);
1545 }
1546 data->fan_div[0] = reg_array_tmp[0] & 0x07;
1547 data->fan_div[1] = (reg_array_tmp[0] >> 4) & 0x07;
1548 data->fan_div[2] = reg_array_tmp[1] & 0x07;
1549 data->fan_div[3] = (reg_array_tmp[1] >> 4) & 0x07;
1550 data->fan_div[4] = reg_array_tmp[2] & 0x07;
1551 data->fan_div[5] = (reg_array_tmp[2] >> 4) & 0x07;
1552 data->fan_div[6] = reg_array_tmp[3] & 0x07;
1553
1554 /* Update the realtime status */
1555 data->alarms = w83792d_read_value(client, W83792D_REG_ALARM1) +
1556 (w83792d_read_value(client, W83792D_REG_ALARM2) << 8) +
1557 (w83792d_read_value(client, W83792D_REG_ALARM3) << 16);
1558
1559 /* Update CaseOpen status and it's CLR_CHS. */
1560 data->chassis = (w83792d_read_value(client,
1561 W83792D_REG_CHASSIS) >> 5) & 0x01;
5563e27d
M		 1562
1563 /* Update Thermal Cruise/Smart Fan I target value */
1564 for (i = 0; i < 3; i++) {
1565 data->thermal_cruise[i] =
1566 w83792d_read_value(client,
1567 W83792D_REG_THERMAL[i]) & 0x7f;
1568 }
1569
1570 /* Update Smart Fan I/II tolerance */
1571 reg_tmp = w83792d_read_value(client, W83792D_REG_TOLERANCE[0]);
1572 data->tolerance[0] = reg_tmp & 0x0f;
1573 data->tolerance[1] = (reg_tmp >> 4) & 0x0f;
1574 data->tolerance[2] = w83792d_read_value(client,
1575 W83792D_REG_TOLERANCE[2]) & 0x0f;
1576
1577 /* Update Smart Fan II temperature points */
1578 for (i = 0; i < 3; i++) {
1579 for (j = 0; j < 4; j++) {
d1743681
GR		 1580 data->sf2_points[i][j]
1581 = w83792d_read_value(client,
1582 W83792D_REG_POINTS[i][j]) & 0x7f;
5563e27d
M		 1583 }
1584 }
1585
1586 /* Update Smart Fan II duty cycle levels */
1587 for (i = 0; i < 3; i++) {
1588 reg_tmp = w83792d_read_value(client,
1589 W83792D_REG_LEVELS[i][0]);
1590 data->sf2_levels[i][0] = reg_tmp & 0x0f;
1591 data->sf2_levels[i][1] = (reg_tmp >> 4) & 0x0f;
1592 reg_tmp = w83792d_read_value(client,
1593 W83792D_REG_LEVELS[i][2]);
1594 data->sf2_levels[i][2] = (reg_tmp >> 4) & 0x0f;
1595 data->sf2_levels[i][3] = reg_tmp & 0x0f;
1596 }
1597
1598 data->last_updated = jiffies;
1599 data->valid = 1;
1600 }
1601
9a61bf63 1602 mutex_unlock(&data->update_lock);
5563e27d
M		 1603
1604#ifdef DEBUG
1605 w83792d_print_debug(data, dev);
1606#endif
1607
1608 return data;
1609}
1610
1611#ifdef DEBUG
1612static void w83792d_print_debug(struct w83792d_data *data, struct device *dev)
1613{
d1743681 1614 int i = 0, j = 0;
5563e27d
M		 1615 dev_dbg(dev, "==========The following is the debug message...========\n");
1616 dev_dbg(dev, "9 set of Voltages: =====>\n");
d1743681 1617 for (i = 0; i < 9; i++) {
5563e27d
M		 1618 dev_dbg(dev, "vin[%d] is: 0x%x\n", i, data->in[i]);
1619 dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
1620 dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
1621 }
99d85560
JD		 1622 dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff);
1623 dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8);
5563e27d 1624 dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
d1743681 1625 for (i = 0; i < 7; i++) {
5563e27d
M		 1626 dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
1627 dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]);
1628 dev_dbg(dev, "pwm[%d] is: 0x%x\n", i, data->pwm[i]);
5563e27d
M		 1629 }
1630 dev_dbg(dev, "3 set of Temperatures: =====>\n");
d1743681 1631 for (i = 0; i < 3; i++)
5563e27d 1632 dev_dbg(dev, "temp1[%d] is: 0x%x\n", i, data->temp1[i]);
5563e27d 1633
d1743681
GR		 1634 for (i = 0; i < 2; i++) {
1635 for (j = 0; j < 6; j++) {
5563e27d
M		 1636 dev_dbg(dev, "temp_add[%d][%d] is: 0x%x\n", i, j,
1637 data->temp_add[i][j]);
1638 }
1639 }
1640
d1743681 1641 for (i = 0; i < 7; i++)
5563e27d 1642 dev_dbg(dev, "fan_div[%d] is: 0x%x\n", i, data->fan_div[i]);
d1743681
GR		 1643
1644 dev_dbg(dev, "==========End of the debug message...================\n");
5563e27d
M		 1645 dev_dbg(dev, "\n");
1646}
1647#endif
1648
f0967eea 1649module_i2c_driver(w83792d_driver);
5563e27d 1650
f85b5205 1651MODULE_AUTHOR("Shane Huang (Winbond)");
5563e27d
M		 1652MODULE_DESCRIPTION("W83792AD/D driver for linux-2.6");
1653MODULE_LICENSE("GPL");
Linux 6.x block layer and io_uring tree(s)