Commit | Line | Data |
---|---|---|
b886d83c | 1 | // SPDX-License-Identifier: GPL-2.0-only |
920fa1ff GR |
2 | /* |
3 | * Driver for SMM665 Power Controller / Monitor | |
4 | * | |
5 | * Copyright (C) 2010 Ericsson AB. | |
6 | * | |
920fa1ff GR |
7 | * This driver should also work for SMM465, SMM764, and SMM766, but is untested |
8 | * for those chips. Only monitoring functionality is implemented. | |
9 | * | |
10 | * Datasheets: | |
11 | * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf | |
12 | * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/module.h> | |
17 | #include <linux/init.h> | |
18 | #include <linux/err.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/i2c.h> | |
21 | #include <linux/hwmon.h> | |
22 | #include <linux/hwmon-sysfs.h> | |
23 | #include <linux/delay.h> | |
dcd8f392 | 24 | #include <linux/jiffies.h> |
920fa1ff GR |
25 | |
26 | /* Internal reference voltage (VREF, x 1000 */ | |
27 | #define SMM665_VREF_ADC_X1000 1250 | |
28 | ||
29 | /* module parameters */ | |
30 | static int vref = SMM665_VREF_ADC_X1000; | |
31 | module_param(vref, int, 0); | |
32 | MODULE_PARM_DESC(vref, "Reference voltage in mV"); | |
33 | ||
34 | enum chips { smm465, smm665, smm665c, smm764, smm766 }; | |
35 | ||
36 | /* | |
37 | * ADC channel addresses | |
38 | */ | |
39 | #define SMM665_MISC16_ADC_DATA_A 0x00 | |
40 | #define SMM665_MISC16_ADC_DATA_B 0x01 | |
41 | #define SMM665_MISC16_ADC_DATA_C 0x02 | |
42 | #define SMM665_MISC16_ADC_DATA_D 0x03 | |
43 | #define SMM665_MISC16_ADC_DATA_E 0x04 | |
44 | #define SMM665_MISC16_ADC_DATA_F 0x05 | |
45 | #define SMM665_MISC16_ADC_DATA_VDD 0x06 | |
46 | #define SMM665_MISC16_ADC_DATA_12V 0x07 | |
47 | #define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08 | |
48 | #define SMM665_MISC16_ADC_DATA_AIN1 0x09 | |
49 | #define SMM665_MISC16_ADC_DATA_AIN2 0x0a | |
50 | ||
51 | /* | |
52 | * Command registers | |
53 | */ | |
54 | #define SMM665_MISC8_CMD_STS 0x80 | |
55 | #define SMM665_MISC8_STATUS1 0x81 | |
56 | #define SMM665_MISC8_STATUSS2 0x82 | |
57 | #define SMM665_MISC8_IO_POLARITY 0x83 | |
58 | #define SMM665_MISC8_PUP_POLARITY 0x84 | |
59 | #define SMM665_MISC8_ADOC_STATUS1 0x85 | |
60 | #define SMM665_MISC8_ADOC_STATUS2 0x86 | |
61 | #define SMM665_MISC8_WRITE_PROT 0x87 | |
62 | #define SMM665_MISC8_STS_TRACK 0x88 | |
63 | ||
64 | /* | |
65 | * Configuration registers and register groups | |
66 | */ | |
67 | #define SMM665_ADOC_ENABLE 0x0d | |
68 | #define SMM665_LIMIT_BASE 0x80 /* First limit register */ | |
69 | ||
70 | /* | |
71 | * Limit register bit masks | |
72 | */ | |
73 | #define SMM665_TRIGGER_RST 0x8000 | |
74 | #define SMM665_TRIGGER_HEALTHY 0x4000 | |
75 | #define SMM665_TRIGGER_POWEROFF 0x2000 | |
76 | #define SMM665_TRIGGER_SHUTDOWN 0x1000 | |
77 | #define SMM665_ADC_MASK 0x03ff | |
78 | ||
79 | #define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \ | |
80 | | SMM665_TRIGGER_POWEROFF \ | |
81 | | SMM665_TRIGGER_SHUTDOWN)) | |
82 | /* | |
83 | * Fault register bit definitions | |
84 | * Values are merged from status registers 1/2, | |
85 | * with status register 1 providing the upper 8 bits. | |
86 | */ | |
87 | #define SMM665_FAULT_A 0x0001 | |
88 | #define SMM665_FAULT_B 0x0002 | |
89 | #define SMM665_FAULT_C 0x0004 | |
90 | #define SMM665_FAULT_D 0x0008 | |
91 | #define SMM665_FAULT_E 0x0010 | |
92 | #define SMM665_FAULT_F 0x0020 | |
93 | #define SMM665_FAULT_VDD 0x0040 | |
94 | #define SMM665_FAULT_12V 0x0080 | |
95 | #define SMM665_FAULT_TEMP 0x0100 | |
96 | #define SMM665_FAULT_AIN1 0x0200 | |
97 | #define SMM665_FAULT_AIN2 0x0400 | |
98 | ||
99 | /* | |
100 | * I2C Register addresses | |
101 | * | |
102 | * The configuration register needs to be the configured base register. | |
103 | * The command/status register address is derived from it. | |
104 | */ | |
105 | #define SMM665_REGMASK 0x78 | |
106 | #define SMM665_CMDREG_BASE 0x48 | |
107 | #define SMM665_CONFREG_BASE 0x50 | |
108 | ||
109 | /* | |
110 | * Equations given by chip manufacturer to calculate voltage/temperature values | |
111 | * vref = Reference voltage on VREF_ADC pin (module parameter) | |
112 | * adc = 10bit ADC value read back from registers | |
113 | */ | |
114 | ||
115 | /* Voltage A-F and VDD */ | |
116 | #define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256) | |
117 | ||
118 | /* Voltage 12VIN */ | |
119 | #define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256) | |
120 | ||
121 | /* Voltage AIN1, AIN2 */ | |
122 | #define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512) | |
123 | ||
124 | /* Temp Sensor */ | |
3c22e232 | 125 | #define SMM665_TEMP_ADC_TO_CELSIUS(adc) (((adc) <= 511) ? \ |
920fa1ff | 126 | ((int)(adc) * 1000 / 4) : \ |
3c22e232 | 127 | (((int)(adc) - 0x400) * 1000 / 4)) |
920fa1ff GR |
128 | |
129 | #define SMM665_NUM_ADC 11 | |
130 | ||
131 | /* | |
132 | * Chip dependent ADC conversion time, in uS | |
133 | */ | |
134 | #define SMM665_ADC_WAIT_SMM665 70 | |
135 | #define SMM665_ADC_WAIT_SMM766 185 | |
136 | ||
137 | struct smm665_data { | |
138 | enum chips type; | |
139 | int conversion_time; /* ADC conversion time */ | |
781126a0 | 140 | struct i2c_client *client; |
920fa1ff GR |
141 | struct mutex update_lock; |
142 | bool valid; | |
143 | unsigned long last_updated; /* in jiffies */ | |
144 | u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */ | |
145 | u16 faults; /* fault status */ | |
146 | /* The following values are in mV */ | |
147 | int critical_min_limit[SMM665_NUM_ADC]; | |
148 | int alarm_min_limit[SMM665_NUM_ADC]; | |
149 | int critical_max_limit[SMM665_NUM_ADC]; | |
150 | int alarm_max_limit[SMM665_NUM_ADC]; | |
151 | struct i2c_client *cmdreg; | |
152 | }; | |
153 | ||
154 | /* | |
155 | * smm665_read16() | |
156 | * | |
157 | * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>. | |
158 | */ | |
159 | static int smm665_read16(struct i2c_client *client, int reg) | |
160 | { | |
161 | int rv, val; | |
162 | ||
163 | rv = i2c_smbus_read_byte_data(client, reg); | |
164 | if (rv < 0) | |
165 | return rv; | |
166 | val = rv << 8; | |
167 | rv = i2c_smbus_read_byte_data(client, reg + 1); | |
168 | if (rv < 0) | |
169 | return rv; | |
170 | val |= rv; | |
171 | return val; | |
172 | } | |
173 | ||
174 | /* | |
175 | * Read adc value. | |
176 | */ | |
177 | static int smm665_read_adc(struct smm665_data *data, int adc) | |
178 | { | |
179 | struct i2c_client *client = data->cmdreg; | |
180 | int rv; | |
181 | int radc; | |
182 | ||
183 | /* | |
184 | * Algorithm for reading ADC, per SMM665 datasheet | |
185 | * | |
186 | * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]} | |
187 | * [wait conversion time] | |
188 | * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]} | |
189 | * | |
190 | * To implement the first part of this exchange, | |
191 | * do a full read transaction and expect a failure/Nack. | |
192 | * This sets up the address pointer on the SMM665 | |
193 | * and starts the ADC conversion. | |
194 | * Then do a two-byte read transaction. | |
195 | */ | |
196 | rv = i2c_smbus_read_byte_data(client, adc << 3); | |
197 | if (rv != -ENXIO) { | |
198 | /* | |
199 | * We expect ENXIO to reflect NACK | |
ccf988b6 | 200 | * (per Documentation/i2c/fault-codes.rst). |
920fa1ff GR |
201 | * Everything else is an error. |
202 | */ | |
203 | dev_dbg(&client->dev, | |
204 | "Unexpected return code %d when setting ADC index", rv); | |
205 | return (rv < 0) ? rv : -EIO; | |
206 | } | |
207 | ||
208 | udelay(data->conversion_time); | |
209 | ||
210 | /* | |
211 | * Now read two bytes. | |
212 | * | |
213 | * Neither i2c_smbus_read_byte() nor | |
214 | * i2c_smbus_read_block_data() worked here, | |
90f4102c | 215 | * so use i2c_smbus_read_word_swapped() instead. |
920fa1ff GR |
216 | * We could also try to use i2c_master_recv(), |
217 | * but that is not always supported. | |
218 | */ | |
90f4102c | 219 | rv = i2c_smbus_read_word_swapped(client, 0); |
920fa1ff GR |
220 | if (rv < 0) { |
221 | dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv); | |
f44e5c5c | 222 | return rv; |
920fa1ff GR |
223 | } |
224 | /* | |
225 | * Validate/verify readback adc channel (in bit 11..14). | |
920fa1ff | 226 | */ |
90f4102c | 227 | radc = (rv >> 11) & 0x0f; |
920fa1ff GR |
228 | if (radc != adc) { |
229 | dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d", | |
230 | adc, radc); | |
231 | return -EIO; | |
232 | } | |
920fa1ff | 233 | |
90f4102c | 234 | return rv & SMM665_ADC_MASK; |
920fa1ff GR |
235 | } |
236 | ||
237 | static struct smm665_data *smm665_update_device(struct device *dev) | |
238 | { | |
781126a0 AL |
239 | struct smm665_data *data = dev_get_drvdata(dev); |
240 | struct i2c_client *client = data->client; | |
920fa1ff GR |
241 | struct smm665_data *ret = data; |
242 | ||
243 | mutex_lock(&data->update_lock); | |
244 | ||
245 | if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { | |
246 | int i, val; | |
247 | ||
248 | /* | |
249 | * read status registers | |
250 | */ | |
251 | val = smm665_read16(client, SMM665_MISC8_STATUS1); | |
252 | if (unlikely(val < 0)) { | |
253 | ret = ERR_PTR(val); | |
254 | goto abort; | |
255 | } | |
256 | data->faults = val; | |
257 | ||
258 | /* Read adc registers */ | |
259 | for (i = 0; i < SMM665_NUM_ADC; i++) { | |
260 | val = smm665_read_adc(data, i); | |
261 | if (unlikely(val < 0)) { | |
262 | ret = ERR_PTR(val); | |
263 | goto abort; | |
264 | } | |
265 | data->adc[i] = val; | |
266 | } | |
267 | data->last_updated = jiffies; | |
268 | data->valid = 1; | |
269 | } | |
270 | abort: | |
271 | mutex_unlock(&data->update_lock); | |
272 | return ret; | |
273 | } | |
274 | ||
275 | /* Return converted value from given adc */ | |
276 | static int smm665_convert(u16 adcval, int index) | |
277 | { | |
278 | int val = 0; | |
279 | ||
280 | switch (index) { | |
281 | case SMM665_MISC16_ADC_DATA_12V: | |
282 | val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); | |
283 | break; | |
284 | ||
285 | case SMM665_MISC16_ADC_DATA_VDD: | |
286 | case SMM665_MISC16_ADC_DATA_A: | |
287 | case SMM665_MISC16_ADC_DATA_B: | |
288 | case SMM665_MISC16_ADC_DATA_C: | |
289 | case SMM665_MISC16_ADC_DATA_D: | |
290 | case SMM665_MISC16_ADC_DATA_E: | |
291 | case SMM665_MISC16_ADC_DATA_F: | |
292 | val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); | |
293 | break; | |
294 | ||
295 | case SMM665_MISC16_ADC_DATA_AIN1: | |
296 | case SMM665_MISC16_ADC_DATA_AIN2: | |
297 | val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK); | |
298 | break; | |
299 | ||
300 | case SMM665_MISC16_ADC_DATA_INT_TEMP: | |
301 | val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK); | |
302 | break; | |
303 | ||
304 | default: | |
305 | /* If we get here, the developer messed up */ | |
306 | WARN_ON_ONCE(1); | |
307 | break; | |
308 | } | |
309 | ||
310 | return val; | |
311 | } | |
312 | ||
313 | static int smm665_get_min(struct device *dev, int index) | |
314 | { | |
781126a0 | 315 | struct smm665_data *data = dev_get_drvdata(dev); |
920fa1ff GR |
316 | |
317 | return data->alarm_min_limit[index]; | |
318 | } | |
319 | ||
320 | static int smm665_get_max(struct device *dev, int index) | |
321 | { | |
781126a0 | 322 | struct smm665_data *data = dev_get_drvdata(dev); |
920fa1ff GR |
323 | |
324 | return data->alarm_max_limit[index]; | |
325 | } | |
326 | ||
327 | static int smm665_get_lcrit(struct device *dev, int index) | |
328 | { | |
781126a0 | 329 | struct smm665_data *data = dev_get_drvdata(dev); |
920fa1ff GR |
330 | |
331 | return data->critical_min_limit[index]; | |
332 | } | |
333 | ||
334 | static int smm665_get_crit(struct device *dev, int index) | |
335 | { | |
781126a0 | 336 | struct smm665_data *data = dev_get_drvdata(dev); |
920fa1ff GR |
337 | |
338 | return data->critical_max_limit[index]; | |
339 | } | |
340 | ||
341 | static ssize_t smm665_show_crit_alarm(struct device *dev, | |
342 | struct device_attribute *da, char *buf) | |
343 | { | |
344 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
345 | struct smm665_data *data = smm665_update_device(dev); | |
346 | int val = 0; | |
347 | ||
348 | if (IS_ERR(data)) | |
349 | return PTR_ERR(data); | |
350 | ||
351 | if (data->faults & (1 << attr->index)) | |
352 | val = 1; | |
353 | ||
354 | return snprintf(buf, PAGE_SIZE, "%d\n", val); | |
355 | } | |
356 | ||
357 | static ssize_t smm665_show_input(struct device *dev, | |
358 | struct device_attribute *da, char *buf) | |
359 | { | |
360 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
361 | struct smm665_data *data = smm665_update_device(dev); | |
362 | int adc = attr->index; | |
363 | int val; | |
364 | ||
365 | if (IS_ERR(data)) | |
366 | return PTR_ERR(data); | |
367 | ||
368 | val = smm665_convert(data->adc[adc], adc); | |
369 | return snprintf(buf, PAGE_SIZE, "%d\n", val); | |
370 | } | |
371 | ||
372 | #define SMM665_SHOW(what) \ | |
b2ae8f87 | 373 | static ssize_t smm665_show_##what(struct device *dev, \ |
920fa1ff GR |
374 | struct device_attribute *da, char *buf) \ |
375 | { \ | |
376 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ | |
377 | const int val = smm665_get_##what(dev, attr->index); \ | |
378 | return snprintf(buf, PAGE_SIZE, "%d\n", val); \ | |
379 | } | |
380 | ||
381 | SMM665_SHOW(min); | |
382 | SMM665_SHOW(max); | |
383 | SMM665_SHOW(lcrit); | |
384 | SMM665_SHOW(crit); | |
385 | ||
3c22e232 GR |
386 | /* |
387 | * These macros are used below in constructing device attribute objects | |
920fa1ff GR |
388 | * for use with sysfs_create_group() to make a sysfs device file |
389 | * for each register. | |
390 | */ | |
391 | ||
392 | #define SMM665_ATTR(name, type, cmd_idx) \ | |
393 | static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \ | |
394 | smm665_show_##type, NULL, cmd_idx) | |
395 | ||
396 | /* Construct a sensor_device_attribute structure for each register */ | |
397 | ||
398 | /* Input voltages */ | |
399 | SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V); | |
400 | SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD); | |
401 | SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A); | |
402 | SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B); | |
403 | SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C); | |
404 | SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D); | |
405 | SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E); | |
406 | SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F); | |
407 | SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1); | |
408 | SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2); | |
409 | ||
410 | /* Input voltages min */ | |
411 | SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V); | |
412 | SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD); | |
413 | SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A); | |
414 | SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B); | |
415 | SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C); | |
416 | SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D); | |
417 | SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E); | |
418 | SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F); | |
419 | SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1); | |
420 | SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2); | |
421 | ||
422 | /* Input voltages max */ | |
423 | SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V); | |
424 | SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD); | |
425 | SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A); | |
426 | SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B); | |
427 | SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C); | |
428 | SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D); | |
429 | SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E); | |
430 | SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F); | |
431 | SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1); | |
432 | SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2); | |
433 | ||
434 | /* Input voltages lcrit */ | |
435 | SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V); | |
436 | SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD); | |
437 | SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A); | |
438 | SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B); | |
439 | SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C); | |
440 | SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D); | |
441 | SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E); | |
442 | SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F); | |
443 | SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1); | |
444 | SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2); | |
445 | ||
446 | /* Input voltages crit */ | |
447 | SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V); | |
448 | SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD); | |
449 | SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A); | |
450 | SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B); | |
451 | SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C); | |
452 | SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D); | |
453 | SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E); | |
454 | SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F); | |
455 | SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1); | |
456 | SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2); | |
457 | ||
458 | /* critical alarms */ | |
459 | SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V); | |
460 | SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD); | |
461 | SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A); | |
462 | SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B); | |
463 | SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C); | |
464 | SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D); | |
465 | SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E); | |
466 | SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F); | |
467 | SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1); | |
468 | SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2); | |
469 | ||
470 | /* Temperature */ | |
471 | SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP); | |
472 | SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP); | |
473 | SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP); | |
474 | SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP); | |
475 | SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP); | |
476 | SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP); | |
477 | ||
478 | /* | |
479 | * Finally, construct an array of pointers to members of the above objects, | |
480 | * as required for sysfs_create_group() | |
481 | */ | |
781126a0 | 482 | static struct attribute *smm665_attrs[] = { |
920fa1ff GR |
483 | &sensor_dev_attr_in1_input.dev_attr.attr, |
484 | &sensor_dev_attr_in1_min.dev_attr.attr, | |
485 | &sensor_dev_attr_in1_max.dev_attr.attr, | |
486 | &sensor_dev_attr_in1_lcrit.dev_attr.attr, | |
487 | &sensor_dev_attr_in1_crit.dev_attr.attr, | |
488 | &sensor_dev_attr_in1_crit_alarm.dev_attr.attr, | |
489 | ||
490 | &sensor_dev_attr_in2_input.dev_attr.attr, | |
491 | &sensor_dev_attr_in2_min.dev_attr.attr, | |
492 | &sensor_dev_attr_in2_max.dev_attr.attr, | |
493 | &sensor_dev_attr_in2_lcrit.dev_attr.attr, | |
494 | &sensor_dev_attr_in2_crit.dev_attr.attr, | |
495 | &sensor_dev_attr_in2_crit_alarm.dev_attr.attr, | |
496 | ||
497 | &sensor_dev_attr_in3_input.dev_attr.attr, | |
498 | &sensor_dev_attr_in3_min.dev_attr.attr, | |
499 | &sensor_dev_attr_in3_max.dev_attr.attr, | |
500 | &sensor_dev_attr_in3_lcrit.dev_attr.attr, | |
501 | &sensor_dev_attr_in3_crit.dev_attr.attr, | |
502 | &sensor_dev_attr_in3_crit_alarm.dev_attr.attr, | |
503 | ||
504 | &sensor_dev_attr_in4_input.dev_attr.attr, | |
505 | &sensor_dev_attr_in4_min.dev_attr.attr, | |
506 | &sensor_dev_attr_in4_max.dev_attr.attr, | |
507 | &sensor_dev_attr_in4_lcrit.dev_attr.attr, | |
508 | &sensor_dev_attr_in4_crit.dev_attr.attr, | |
509 | &sensor_dev_attr_in4_crit_alarm.dev_attr.attr, | |
510 | ||
511 | &sensor_dev_attr_in5_input.dev_attr.attr, | |
512 | &sensor_dev_attr_in5_min.dev_attr.attr, | |
513 | &sensor_dev_attr_in5_max.dev_attr.attr, | |
514 | &sensor_dev_attr_in5_lcrit.dev_attr.attr, | |
515 | &sensor_dev_attr_in5_crit.dev_attr.attr, | |
516 | &sensor_dev_attr_in5_crit_alarm.dev_attr.attr, | |
517 | ||
518 | &sensor_dev_attr_in6_input.dev_attr.attr, | |
519 | &sensor_dev_attr_in6_min.dev_attr.attr, | |
520 | &sensor_dev_attr_in6_max.dev_attr.attr, | |
521 | &sensor_dev_attr_in6_lcrit.dev_attr.attr, | |
522 | &sensor_dev_attr_in6_crit.dev_attr.attr, | |
523 | &sensor_dev_attr_in6_crit_alarm.dev_attr.attr, | |
524 | ||
525 | &sensor_dev_attr_in7_input.dev_attr.attr, | |
526 | &sensor_dev_attr_in7_min.dev_attr.attr, | |
527 | &sensor_dev_attr_in7_max.dev_attr.attr, | |
528 | &sensor_dev_attr_in7_lcrit.dev_attr.attr, | |
529 | &sensor_dev_attr_in7_crit.dev_attr.attr, | |
530 | &sensor_dev_attr_in7_crit_alarm.dev_attr.attr, | |
531 | ||
532 | &sensor_dev_attr_in8_input.dev_attr.attr, | |
533 | &sensor_dev_attr_in8_min.dev_attr.attr, | |
534 | &sensor_dev_attr_in8_max.dev_attr.attr, | |
535 | &sensor_dev_attr_in8_lcrit.dev_attr.attr, | |
536 | &sensor_dev_attr_in8_crit.dev_attr.attr, | |
537 | &sensor_dev_attr_in8_crit_alarm.dev_attr.attr, | |
538 | ||
539 | &sensor_dev_attr_in9_input.dev_attr.attr, | |
540 | &sensor_dev_attr_in9_min.dev_attr.attr, | |
541 | &sensor_dev_attr_in9_max.dev_attr.attr, | |
542 | &sensor_dev_attr_in9_lcrit.dev_attr.attr, | |
543 | &sensor_dev_attr_in9_crit.dev_attr.attr, | |
544 | &sensor_dev_attr_in9_crit_alarm.dev_attr.attr, | |
545 | ||
546 | &sensor_dev_attr_in10_input.dev_attr.attr, | |
547 | &sensor_dev_attr_in10_min.dev_attr.attr, | |
548 | &sensor_dev_attr_in10_max.dev_attr.attr, | |
549 | &sensor_dev_attr_in10_lcrit.dev_attr.attr, | |
550 | &sensor_dev_attr_in10_crit.dev_attr.attr, | |
551 | &sensor_dev_attr_in10_crit_alarm.dev_attr.attr, | |
552 | ||
553 | &sensor_dev_attr_temp1_input.dev_attr.attr, | |
554 | &sensor_dev_attr_temp1_min.dev_attr.attr, | |
555 | &sensor_dev_attr_temp1_max.dev_attr.attr, | |
556 | &sensor_dev_attr_temp1_lcrit.dev_attr.attr, | |
557 | &sensor_dev_attr_temp1_crit.dev_attr.attr, | |
558 | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, | |
559 | ||
560 | NULL, | |
561 | }; | |
562 | ||
781126a0 | 563 | ATTRIBUTE_GROUPS(smm665); |
920fa1ff | 564 | |
67487038 SK |
565 | static const struct i2c_device_id smm665_id[]; |
566 | ||
567 | static int smm665_probe(struct i2c_client *client) | |
920fa1ff GR |
568 | { |
569 | struct i2c_adapter *adapter = client->adapter; | |
570 | struct smm665_data *data; | |
781126a0 | 571 | struct device *hwmon_dev; |
920fa1ff GR |
572 | int i, ret; |
573 | ||
574 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
575 | | I2C_FUNC_SMBUS_WORD_DATA)) | |
576 | return -ENODEV; | |
577 | ||
578 | if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0) | |
579 | return -ENODEV; | |
580 | ||
b8a5a7ce | 581 | data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); |
920fa1ff | 582 | if (!data) |
b8a5a7ce | 583 | return -ENOMEM; |
920fa1ff GR |
584 | |
585 | i2c_set_clientdata(client, data); | |
586 | mutex_init(&data->update_lock); | |
587 | ||
781126a0 | 588 | data->client = client; |
67487038 | 589 | data->type = i2c_match_id(smm665_id, client)->driver_data; |
25d40164 | 590 | data->cmdreg = i2c_new_dummy_device(adapter, (client->addr & ~SMM665_REGMASK) |
920fa1ff | 591 | | SMM665_CMDREG_BASE); |
25d40164 WS |
592 | if (IS_ERR(data->cmdreg)) |
593 | return PTR_ERR(data->cmdreg); | |
920fa1ff GR |
594 | |
595 | switch (data->type) { | |
596 | case smm465: | |
597 | case smm665: | |
598 | data->conversion_time = SMM665_ADC_WAIT_SMM665; | |
599 | break; | |
600 | case smm665c: | |
601 | case smm764: | |
602 | case smm766: | |
603 | data->conversion_time = SMM665_ADC_WAIT_SMM766; | |
604 | break; | |
605 | } | |
606 | ||
607 | ret = -ENODEV; | |
608 | if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0) | |
609 | goto out_unregister; | |
610 | ||
611 | /* | |
612 | * Read limits. | |
613 | * | |
614 | * Limit registers start with register SMM665_LIMIT_BASE. | |
615 | * Each channel uses 8 registers, providing four limit values | |
616 | * per channel. Each limit value requires two registers, with the | |
617 | * high byte in the first register and the low byte in the second | |
618 | * register. The first two limits are under limit values, followed | |
619 | * by two over limit values. | |
620 | * | |
621 | * Limit register order matches the ADC register order, so we use | |
622 | * ADC register defines throughout the code to index limit registers. | |
623 | * | |
624 | * We save the first retrieved value both as "critical" and "alarm" | |
625 | * value. The second value overwrites either the critical or the | |
626 | * alarm value, depending on its configuration. This ensures that both | |
627 | * critical and alarm values are initialized, even if both registers are | |
628 | * configured as critical or non-critical. | |
629 | */ | |
630 | for (i = 0; i < SMM665_NUM_ADC; i++) { | |
631 | int val; | |
632 | ||
633 | val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8); | |
634 | if (unlikely(val < 0)) | |
635 | goto out_unregister; | |
636 | data->critical_min_limit[i] = data->alarm_min_limit[i] | |
637 | = smm665_convert(val, i); | |
638 | val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2); | |
639 | if (unlikely(val < 0)) | |
640 | goto out_unregister; | |
641 | if (smm665_is_critical(val)) | |
642 | data->critical_min_limit[i] = smm665_convert(val, i); | |
643 | else | |
644 | data->alarm_min_limit[i] = smm665_convert(val, i); | |
645 | val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4); | |
646 | if (unlikely(val < 0)) | |
647 | goto out_unregister; | |
648 | data->critical_max_limit[i] = data->alarm_max_limit[i] | |
649 | = smm665_convert(val, i); | |
650 | val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6); | |
651 | if (unlikely(val < 0)) | |
652 | goto out_unregister; | |
653 | if (smm665_is_critical(val)) | |
654 | data->critical_max_limit[i] = smm665_convert(val, i); | |
655 | else | |
656 | data->alarm_max_limit[i] = smm665_convert(val, i); | |
657 | } | |
658 | ||
781126a0 AL |
659 | hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, |
660 | client->name, data, | |
661 | smm665_groups); | |
662 | if (IS_ERR(hwmon_dev)) { | |
663 | ret = PTR_ERR(hwmon_dev); | |
920fa1ff | 664 | goto out_unregister; |
920fa1ff GR |
665 | } |
666 | ||
667 | return 0; | |
668 | ||
920fa1ff GR |
669 | out_unregister: |
670 | i2c_unregister_device(data->cmdreg); | |
920fa1ff GR |
671 | return ret; |
672 | } | |
673 | ||
674 | static int smm665_remove(struct i2c_client *client) | |
675 | { | |
676 | struct smm665_data *data = i2c_get_clientdata(client); | |
677 | ||
678 | i2c_unregister_device(data->cmdreg); | |
920fa1ff GR |
679 | return 0; |
680 | } | |
681 | ||
682 | static const struct i2c_device_id smm665_id[] = { | |
683 | {"smm465", smm465}, | |
684 | {"smm665", smm665}, | |
685 | {"smm665c", smm665c}, | |
686 | {"smm764", smm764}, | |
687 | {"smm766", smm766}, | |
688 | {} | |
689 | }; | |
690 | ||
691 | MODULE_DEVICE_TABLE(i2c, smm665_id); | |
692 | ||
693 | /* This is the driver that will be inserted */ | |
694 | static struct i2c_driver smm665_driver = { | |
695 | .driver = { | |
696 | .name = "smm665", | |
697 | }, | |
67487038 | 698 | .probe_new = smm665_probe, |
920fa1ff GR |
699 | .remove = smm665_remove, |
700 | .id_table = smm665_id, | |
701 | }; | |
702 | ||
f0967eea | 703 | module_i2c_driver(smm665_driver); |
920fa1ff GR |
704 | |
705 | MODULE_AUTHOR("Guenter Roeck"); | |
706 | MODULE_DESCRIPTION("SMM665 driver"); | |
707 | MODULE_LICENSE("GPL"); |