Commit | Line | Data |
---|---|---|
c942fddf | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
61052652 VP |
2 | /* |
3 | * Hardware monitoring driver for Texas Instruments TPS53679 | |
4 | * | |
5 | * Copyright (c) 2017 Mellanox Technologies. All rights reserved. | |
6 | * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> | |
61052652 VP |
7 | */ |
8 | ||
53030bcc | 9 | #include <linux/bits.h> |
61052652 VP |
10 | #include <linux/err.h> |
11 | #include <linux/i2c.h> | |
12 | #include <linux/init.h> | |
13 | #include <linux/kernel.h> | |
14 | #include <linux/module.h> | |
63eb4587 | 15 | #include <linux/of_device.h> |
61052652 VP |
16 | #include "pmbus.h" |
17 | ||
63eb4587 | 18 | enum chips { |
6f944004 | 19 | tps53647, tps53667, tps53679, tps53681, tps53688 |
63eb4587 GR |
20 | }; |
21 | ||
6f944004 GR |
22 | #define TPS53647_PAGE_NUM 1 |
23 | ||
61052652 VP |
24 | #define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */ |
25 | #define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */ | |
26 | #define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC */ | |
27 | #define TPS53679_PROT_IMVP8_5MV 0x05 /* IMVP8 mode, 5-mV DAC */ | |
28 | #define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */ | |
29 | #define TPS53679_PAGE_NUM 2 | |
30 | ||
53030bcc GR |
31 | #define TPS53681_DEVICE_ID 0x81 |
32 | ||
33 | #define TPS53681_PMBUS_REVISION 0x33 | |
34 | ||
35 | #define TPS53681_MFR_SPECIFIC_20 0xe4 /* Number of phases, per page */ | |
36 | ||
37 | static int tps53679_identify_mode(struct i2c_client *client, | |
38 | struct pmbus_driver_info *info) | |
61052652 VP |
39 | { |
40 | u8 vout_params; | |
b9fa0a3a | 41 | int i, ret; |
61052652 | 42 | |
6f944004 | 43 | for (i = 0; i < info->pages; i++) { |
b9fa0a3a VP |
44 | /* Read the register with VOUT scaling value.*/ |
45 | ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE); | |
46 | if (ret < 0) | |
47 | return ret; | |
61052652 | 48 | |
b9fa0a3a | 49 | vout_params = ret & GENMASK(4, 0); |
61052652 | 50 | |
b9fa0a3a VP |
51 | switch (vout_params) { |
52 | case TPS53679_PROT_VR13_10MV: | |
53 | case TPS53679_PROT_VR12_5_10MV: | |
54 | info->vrm_version[i] = vr13; | |
55 | break; | |
56 | case TPS53679_PROT_VR13_5MV: | |
57 | case TPS53679_PROT_VR12_5MV: | |
58 | case TPS53679_PROT_IMVP8_5MV: | |
59 | info->vrm_version[i] = vr12; | |
60 | break; | |
61 | default: | |
62 | return -EINVAL; | |
63 | } | |
61052652 VP |
64 | } |
65 | ||
66 | return 0; | |
67 | } | |
68 | ||
53030bcc GR |
69 | static int tps53679_identify_phases(struct i2c_client *client, |
70 | struct pmbus_driver_info *info) | |
71 | { | |
72 | int ret; | |
73 | ||
74 | /* On TPS53681, only channel A provides per-phase output current */ | |
75 | ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20); | |
76 | if (ret < 0) | |
77 | return ret; | |
78 | info->phases[0] = (ret & 0x07) + 1; | |
79 | ||
80 | return 0; | |
81 | } | |
82 | ||
83 | static int tps53679_identify_chip(struct i2c_client *client, | |
84 | u8 revision, u16 id) | |
85 | { | |
86 | u8 buf[I2C_SMBUS_BLOCK_MAX]; | |
87 | int ret; | |
88 | ||
89 | ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION); | |
90 | if (ret < 0) | |
91 | return ret; | |
92 | if (ret != revision) { | |
93 | dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret); | |
94 | return -ENODEV; | |
95 | } | |
96 | ||
97 | ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); | |
98 | if (ret < 0) | |
99 | return ret; | |
100 | if (ret != 1 || buf[0] != id) { | |
101 | dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]); | |
102 | return -ENODEV; | |
103 | } | |
104 | return 0; | |
105 | } | |
106 | ||
107 | /* | |
108 | * Common identification function for chips with multi-phase support. | |
109 | * Since those chips have special configuration registers, we want to have | |
110 | * some level of reassurance that we are really talking with the chip | |
111 | * being probed. Check PMBus revision and chip ID. | |
112 | */ | |
113 | static int tps53679_identify_multiphase(struct i2c_client *client, | |
114 | struct pmbus_driver_info *info, | |
115 | int pmbus_rev, int device_id) | |
116 | { | |
117 | int ret; | |
118 | ||
119 | ret = tps53679_identify_chip(client, pmbus_rev, device_id); | |
120 | if (ret < 0) | |
121 | return ret; | |
122 | ||
123 | ret = tps53679_identify_mode(client, info); | |
124 | if (ret < 0) | |
125 | return ret; | |
126 | ||
127 | return tps53679_identify_phases(client, info); | |
128 | } | |
129 | ||
130 | static int tps53679_identify(struct i2c_client *client, | |
131 | struct pmbus_driver_info *info) | |
132 | { | |
133 | return tps53679_identify_mode(client, info); | |
134 | } | |
135 | ||
136 | static int tps53681_identify(struct i2c_client *client, | |
137 | struct pmbus_driver_info *info) | |
138 | { | |
139 | return tps53679_identify_multiphase(client, info, | |
140 | TPS53681_PMBUS_REVISION, | |
141 | TPS53681_DEVICE_ID); | |
142 | } | |
143 | ||
144 | static int tps53681_read_word_data(struct i2c_client *client, int page, | |
145 | int phase, int reg) | |
146 | { | |
147 | /* | |
148 | * For reading the total output current (READ_IOUT) for all phases, | |
149 | * the chip datasheet is a bit vague. It says "PHASE must be set to | |
150 | * FFh to access all phases simultaneously. PHASE may also be set to | |
151 | * 80h readack (!) the total phase current". | |
152 | * Experiments show that the command does _not_ report the total | |
153 | * current for all phases if the phase is set to 0xff. Instead, it | |
154 | * appears to report the current of one of the phases. Override phase | |
155 | * parameter with 0x80 when reading the total output current on page 0. | |
156 | */ | |
157 | if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff) | |
158 | return pmbus_read_word_data(client, page, 0x80, reg); | |
159 | return -ENODATA; | |
160 | } | |
161 | ||
61052652 | 162 | static struct pmbus_driver_info tps53679_info = { |
61052652 VP |
163 | .format[PSC_VOLTAGE_IN] = linear, |
164 | .format[PSC_VOLTAGE_OUT] = vid, | |
165 | .format[PSC_TEMPERATURE] = linear, | |
166 | .format[PSC_CURRENT_OUT] = linear, | |
167 | .format[PSC_POWER] = linear, | |
39c749ac GR |
168 | .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | |
169 | PMBUS_HAVE_STATUS_INPUT | | |
63eb4587 | 170 | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
61052652 VP |
171 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
172 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | | |
173 | PMBUS_HAVE_POUT, | |
39c749ac | 174 | .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
61052652 VP |
175 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
176 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | | |
177 | PMBUS_HAVE_POUT, | |
53030bcc GR |
178 | .pfunc[0] = PMBUS_HAVE_IOUT, |
179 | .pfunc[1] = PMBUS_HAVE_IOUT, | |
180 | .pfunc[2] = PMBUS_HAVE_IOUT, | |
181 | .pfunc[3] = PMBUS_HAVE_IOUT, | |
182 | .pfunc[4] = PMBUS_HAVE_IOUT, | |
183 | .pfunc[5] = PMBUS_HAVE_IOUT, | |
61052652 VP |
184 | }; |
185 | ||
186 | static int tps53679_probe(struct i2c_client *client, | |
187 | const struct i2c_device_id *id) | |
188 | { | |
63eb4587 | 189 | struct device *dev = &client->dev; |
ff066653 | 190 | struct pmbus_driver_info *info; |
63eb4587 GR |
191 | enum chips chip_id; |
192 | ||
193 | if (dev->of_node) | |
194 | chip_id = (enum chips)of_device_get_match_data(dev); | |
195 | else | |
196 | chip_id = id->driver_data; | |
ff066653 | 197 | |
63eb4587 | 198 | info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL); |
ff066653 VP |
199 | if (!info) |
200 | return -ENOMEM; | |
201 | ||
63eb4587 | 202 | switch (chip_id) { |
6f944004 GR |
203 | case tps53647: |
204 | case tps53667: | |
205 | info->pages = TPS53647_PAGE_NUM; | |
206 | info->identify = tps53679_identify; | |
207 | break; | |
63eb4587 GR |
208 | case tps53679: |
209 | case tps53688: | |
210 | info->pages = TPS53679_PAGE_NUM; | |
211 | info->identify = tps53679_identify; | |
212 | break; | |
53030bcc GR |
213 | case tps53681: |
214 | info->pages = TPS53679_PAGE_NUM; | |
215 | info->phases[0] = 6; | |
216 | info->identify = tps53681_identify; | |
217 | info->read_word_data = tps53681_read_word_data; | |
218 | break; | |
63eb4587 GR |
219 | default: |
220 | return -ENODEV; | |
221 | } | |
222 | ||
ff066653 | 223 | return pmbus_do_probe(client, id, info); |
61052652 VP |
224 | } |
225 | ||
226 | static const struct i2c_device_id tps53679_id[] = { | |
6f944004 GR |
227 | {"tps53647", tps53647}, |
228 | {"tps53667", tps53667}, | |
63eb4587 | 229 | {"tps53679", tps53679}, |
53030bcc | 230 | {"tps53681", tps53681}, |
63eb4587 | 231 | {"tps53688", tps53688}, |
61052652 VP |
232 | {} |
233 | }; | |
234 | ||
235 | MODULE_DEVICE_TABLE(i2c, tps53679_id); | |
236 | ||
e91cb17b | 237 | static const struct of_device_id __maybe_unused tps53679_of_match[] = { |
6f944004 GR |
238 | {.compatible = "ti,tps53647", .data = (void *)tps53647}, |
239 | {.compatible = "ti,tps53667", .data = (void *)tps53667}, | |
63eb4587 | 240 | {.compatible = "ti,tps53679", .data = (void *)tps53679}, |
53030bcc | 241 | {.compatible = "ti,tps53681", .data = (void *)tps53681}, |
63eb4587 | 242 | {.compatible = "ti,tps53688", .data = (void *)tps53688}, |
61052652 VP |
243 | {} |
244 | }; | |
245 | MODULE_DEVICE_TABLE(of, tps53679_of_match); | |
246 | ||
247 | static struct i2c_driver tps53679_driver = { | |
248 | .driver = { | |
249 | .name = "tps53679", | |
250 | .of_match_table = of_match_ptr(tps53679_of_match), | |
251 | }, | |
252 | .probe = tps53679_probe, | |
253 | .remove = pmbus_do_remove, | |
254 | .id_table = tps53679_id, | |
255 | }; | |
256 | ||
257 | module_i2c_driver(tps53679_driver); | |
258 | ||
259 | MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); | |
260 | MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679"); | |
261 | MODULE_LICENSE("GPL"); |