Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | lm78.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | monitoring | |
4 | Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> | |
5 | ||
6 | This program is free software; you can redistribute it and/or modify | |
7 | it under the terms of the GNU General Public License as published by | |
8 | the Free Software Foundation; either version 2 of the License, or | |
9 | (at your option) any later version. | |
10 | ||
11 | This program is distributed in the hope that it will be useful, | |
12 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | GNU General Public License for more details. | |
15 | ||
16 | You should have received a copy of the GNU General Public License | |
17 | along with this program; if not, write to the Free Software | |
18 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
19 | */ | |
20 | ||
1da177e4 LT |
21 | #include <linux/module.h> |
22 | #include <linux/init.h> | |
23 | #include <linux/slab.h> | |
24 | #include <linux/jiffies.h> | |
25 | #include <linux/i2c.h> | |
fde09509 | 26 | #include <linux/i2c-isa.h> |
943b0830 | 27 | #include <linux/hwmon.h> |
19f673ed | 28 | #include <linux/hwmon-vid.h> |
943b0830 | 29 | #include <linux/err.h> |
1da177e4 LT |
30 | #include <asm/io.h> |
31 | ||
32 | /* Addresses to scan */ | |
33 | static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, | |
34 | 0x25, 0x26, 0x27, 0x28, 0x29, | |
35 | 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, | |
36 | 0x2f, I2C_CLIENT_END }; | |
2d8672c5 | 37 | static unsigned short isa_address = 0x290; |
1da177e4 LT |
38 | |
39 | /* Insmod parameters */ | |
f4b50261 | 40 | I2C_CLIENT_INSMOD_2(lm78, lm79); |
1da177e4 LT |
41 | |
42 | /* Many LM78 constants specified below */ | |
43 | ||
44 | /* Length of ISA address segment */ | |
45 | #define LM78_EXTENT 8 | |
46 | ||
47 | /* Where are the ISA address/data registers relative to the base address */ | |
48 | #define LM78_ADDR_REG_OFFSET 5 | |
49 | #define LM78_DATA_REG_OFFSET 6 | |
50 | ||
51 | /* The LM78 registers */ | |
52 | #define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2) | |
53 | #define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2) | |
54 | #define LM78_REG_IN(nr) (0x20 + (nr)) | |
55 | ||
56 | #define LM78_REG_FAN_MIN(nr) (0x3b + (nr)) | |
57 | #define LM78_REG_FAN(nr) (0x28 + (nr)) | |
58 | ||
59 | #define LM78_REG_TEMP 0x27 | |
60 | #define LM78_REG_TEMP_OVER 0x39 | |
61 | #define LM78_REG_TEMP_HYST 0x3a | |
62 | ||
63 | #define LM78_REG_ALARM1 0x41 | |
64 | #define LM78_REG_ALARM2 0x42 | |
65 | ||
66 | #define LM78_REG_VID_FANDIV 0x47 | |
67 | ||
68 | #define LM78_REG_CONFIG 0x40 | |
69 | #define LM78_REG_CHIPID 0x49 | |
70 | #define LM78_REG_I2C_ADDR 0x48 | |
71 | ||
72 | ||
73 | /* Conversions. Rounding and limit checking is only done on the TO_REG | |
74 | variants. */ | |
75 | ||
76 | /* IN: mV, (0V to 4.08V) | |
77 | REG: 16mV/bit */ | |
78 | static inline u8 IN_TO_REG(unsigned long val) | |
79 | { | |
80 | unsigned long nval = SENSORS_LIMIT(val, 0, 4080); | |
81 | return (nval + 8) / 16; | |
82 | } | |
83 | #define IN_FROM_REG(val) ((val) * 16) | |
84 | ||
85 | static inline u8 FAN_TO_REG(long rpm, int div) | |
86 | { | |
87 | if (rpm <= 0) | |
88 | return 255; | |
89 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); | |
90 | } | |
91 | ||
92 | static inline int FAN_FROM_REG(u8 val, int div) | |
93 | { | |
94 | return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); | |
95 | } | |
96 | ||
97 | /* TEMP: mC (-128C to +127C) | |
98 | REG: 1C/bit, two's complement */ | |
99 | static inline s8 TEMP_TO_REG(int val) | |
100 | { | |
101 | int nval = SENSORS_LIMIT(val, -128000, 127000) ; | |
102 | return nval<0 ? (nval-500)/1000 : (nval+500)/1000; | |
103 | } | |
104 | ||
105 | static inline int TEMP_FROM_REG(s8 val) | |
106 | { | |
107 | return val * 1000; | |
108 | } | |
109 | ||
1da177e4 LT |
110 | #define DIV_FROM_REG(val) (1 << (val)) |
111 | ||
112 | /* There are some complications in a module like this. First off, LM78 chips | |
113 | may be both present on the SMBus and the ISA bus, and we have to handle | |
114 | those cases separately at some places. Second, there might be several | |
115 | LM78 chips available (well, actually, that is probably never done; but | |
116 | it is a clean illustration of how to handle a case like that). Finally, | |
117 | a specific chip may be attached to *both* ISA and SMBus, and we would | |
118 | not like to detect it double. Fortunately, in the case of the LM78 at | |
119 | least, a register tells us what SMBus address we are on, so that helps | |
120 | a bit - except if there could be more than one SMBus. Groan. No solution | |
121 | for this yet. */ | |
122 | ||
123 | /* This module may seem overly long and complicated. In fact, it is not so | |
124 | bad. Quite a lot of bookkeeping is done. A real driver can often cut | |
125 | some corners. */ | |
126 | ||
127 | /* For each registered LM78, we need to keep some data in memory. That | |
128 | data is pointed to by lm78_list[NR]->data. The structure itself is | |
129 | dynamically allocated, at the same time when a new lm78 client is | |
130 | allocated. */ | |
131 | struct lm78_data { | |
132 | struct i2c_client client; | |
943b0830 | 133 | struct class_device *class_dev; |
1da177e4 LT |
134 | struct semaphore lock; |
135 | enum chips type; | |
136 | ||
137 | struct semaphore update_lock; | |
138 | char valid; /* !=0 if following fields are valid */ | |
139 | unsigned long last_updated; /* In jiffies */ | |
140 | ||
141 | u8 in[7]; /* Register value */ | |
142 | u8 in_max[7]; /* Register value */ | |
143 | u8 in_min[7]; /* Register value */ | |
144 | u8 fan[3]; /* Register value */ | |
145 | u8 fan_min[3]; /* Register value */ | |
146 | s8 temp; /* Register value */ | |
147 | s8 temp_over; /* Register value */ | |
148 | s8 temp_hyst; /* Register value */ | |
149 | u8 fan_div[3]; /* Register encoding, shifted right */ | |
150 | u8 vid; /* Register encoding, combined */ | |
151 | u16 alarms; /* Register encoding, combined */ | |
152 | }; | |
153 | ||
154 | ||
155 | static int lm78_attach_adapter(struct i2c_adapter *adapter); | |
2d8672c5 | 156 | static int lm78_isa_attach_adapter(struct i2c_adapter *adapter); |
1da177e4 LT |
157 | static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); |
158 | static int lm78_detach_client(struct i2c_client *client); | |
159 | ||
160 | static int lm78_read_value(struct i2c_client *client, u8 register); | |
161 | static int lm78_write_value(struct i2c_client *client, u8 register, u8 value); | |
162 | static struct lm78_data *lm78_update_device(struct device *dev); | |
163 | static void lm78_init_client(struct i2c_client *client); | |
164 | ||
165 | ||
166 | static struct i2c_driver lm78_driver = { | |
cdaf7934 | 167 | .driver = { |
cdaf7934 LR |
168 | .name = "lm78", |
169 | }, | |
1da177e4 | 170 | .id = I2C_DRIVERID_LM78, |
1da177e4 LT |
171 | .attach_adapter = lm78_attach_adapter, |
172 | .detach_client = lm78_detach_client, | |
173 | }; | |
174 | ||
fde09509 | 175 | static struct i2c_driver lm78_isa_driver = { |
cdaf7934 | 176 | .driver = { |
cdaf7934 LR |
177 | .name = "lm78-isa", |
178 | }, | |
2d8672c5 | 179 | .attach_adapter = lm78_isa_attach_adapter, |
fde09509 JD |
180 | .detach_client = lm78_detach_client, |
181 | }; | |
182 | ||
183 | ||
1da177e4 LT |
184 | /* 7 Voltages */ |
185 | static ssize_t show_in(struct device *dev, char *buf, int nr) | |
186 | { | |
187 | struct lm78_data *data = lm78_update_device(dev); | |
188 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); | |
189 | } | |
190 | ||
191 | static ssize_t show_in_min(struct device *dev, char *buf, int nr) | |
192 | { | |
193 | struct lm78_data *data = lm78_update_device(dev); | |
194 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); | |
195 | } | |
196 | ||
197 | static ssize_t show_in_max(struct device *dev, char *buf, int nr) | |
198 | { | |
199 | struct lm78_data *data = lm78_update_device(dev); | |
200 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); | |
201 | } | |
202 | ||
203 | static ssize_t set_in_min(struct device *dev, const char *buf, | |
204 | size_t count, int nr) | |
205 | { | |
206 | struct i2c_client *client = to_i2c_client(dev); | |
207 | struct lm78_data *data = i2c_get_clientdata(client); | |
208 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
209 | ||
210 | down(&data->update_lock); | |
211 | data->in_min[nr] = IN_TO_REG(val); | |
212 | lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]); | |
213 | up(&data->update_lock); | |
214 | return count; | |
215 | } | |
216 | ||
217 | static ssize_t set_in_max(struct device *dev, const char *buf, | |
218 | size_t count, int nr) | |
219 | { | |
220 | struct i2c_client *client = to_i2c_client(dev); | |
221 | struct lm78_data *data = i2c_get_clientdata(client); | |
222 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
223 | ||
224 | down(&data->update_lock); | |
225 | data->in_max[nr] = IN_TO_REG(val); | |
226 | lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]); | |
227 | up(&data->update_lock); | |
228 | return count; | |
229 | } | |
230 | ||
231 | #define show_in_offset(offset) \ | |
232 | static ssize_t \ | |
8627f9ba | 233 | show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
234 | { \ |
235 | return show_in(dev, buf, offset); \ | |
236 | } \ | |
237 | static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ | |
238 | show_in##offset, NULL); \ | |
239 | static ssize_t \ | |
8627f9ba | 240 | show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
241 | { \ |
242 | return show_in_min(dev, buf, offset); \ | |
243 | } \ | |
244 | static ssize_t \ | |
8627f9ba | 245 | show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
246 | { \ |
247 | return show_in_max(dev, buf, offset); \ | |
248 | } \ | |
8627f9ba | 249 | static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ |
1da177e4 LT |
250 | const char *buf, size_t count) \ |
251 | { \ | |
252 | return set_in_min(dev, buf, count, offset); \ | |
253 | } \ | |
8627f9ba | 254 | static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ |
1da177e4 LT |
255 | const char *buf, size_t count) \ |
256 | { \ | |
257 | return set_in_max(dev, buf, count, offset); \ | |
258 | } \ | |
259 | static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ | |
260 | show_in##offset##_min, set_in##offset##_min); \ | |
261 | static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ | |
262 | show_in##offset##_max, set_in##offset##_max); | |
263 | ||
264 | show_in_offset(0); | |
265 | show_in_offset(1); | |
266 | show_in_offset(2); | |
267 | show_in_offset(3); | |
268 | show_in_offset(4); | |
269 | show_in_offset(5); | |
270 | show_in_offset(6); | |
271 | ||
272 | /* Temperature */ | |
8627f9ba | 273 | static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
274 | { |
275 | struct lm78_data *data = lm78_update_device(dev); | |
276 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); | |
277 | } | |
278 | ||
8627f9ba | 279 | static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
280 | { |
281 | struct lm78_data *data = lm78_update_device(dev); | |
282 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); | |
283 | } | |
284 | ||
8627f9ba | 285 | static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
286 | { |
287 | struct i2c_client *client = to_i2c_client(dev); | |
288 | struct lm78_data *data = i2c_get_clientdata(client); | |
289 | long val = simple_strtol(buf, NULL, 10); | |
290 | ||
291 | down(&data->update_lock); | |
292 | data->temp_over = TEMP_TO_REG(val); | |
293 | lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over); | |
294 | up(&data->update_lock); | |
295 | return count; | |
296 | } | |
297 | ||
8627f9ba | 298 | static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
299 | { |
300 | struct lm78_data *data = lm78_update_device(dev); | |
301 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); | |
302 | } | |
303 | ||
8627f9ba | 304 | static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) |
1da177e4 LT |
305 | { |
306 | struct i2c_client *client = to_i2c_client(dev); | |
307 | struct lm78_data *data = i2c_get_clientdata(client); | |
308 | long val = simple_strtol(buf, NULL, 10); | |
309 | ||
310 | down(&data->update_lock); | |
311 | data->temp_hyst = TEMP_TO_REG(val); | |
312 | lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst); | |
313 | up(&data->update_lock); | |
314 | return count; | |
315 | } | |
316 | ||
317 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); | |
318 | static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, | |
319 | show_temp_over, set_temp_over); | |
320 | static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, | |
321 | show_temp_hyst, set_temp_hyst); | |
322 | ||
323 | /* 3 Fans */ | |
324 | static ssize_t show_fan(struct device *dev, char *buf, int nr) | |
325 | { | |
326 | struct lm78_data *data = lm78_update_device(dev); | |
327 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], | |
328 | DIV_FROM_REG(data->fan_div[nr])) ); | |
329 | } | |
330 | ||
331 | static ssize_t show_fan_min(struct device *dev, char *buf, int nr) | |
332 | { | |
333 | struct lm78_data *data = lm78_update_device(dev); | |
334 | return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], | |
335 | DIV_FROM_REG(data->fan_div[nr])) ); | |
336 | } | |
337 | ||
338 | static ssize_t set_fan_min(struct device *dev, const char *buf, | |
339 | size_t count, int nr) | |
340 | { | |
341 | struct i2c_client *client = to_i2c_client(dev); | |
342 | struct lm78_data *data = i2c_get_clientdata(client); | |
343 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
344 | ||
345 | down(&data->update_lock); | |
346 | data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); | |
347 | lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); | |
348 | up(&data->update_lock); | |
349 | return count; | |
350 | } | |
351 | ||
352 | static ssize_t show_fan_div(struct device *dev, char *buf, int nr) | |
353 | { | |
354 | struct lm78_data *data = lm78_update_device(dev); | |
355 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); | |
356 | } | |
357 | ||
358 | /* Note: we save and restore the fan minimum here, because its value is | |
359 | determined in part by the fan divisor. This follows the principle of | |
360 | least suprise; the user doesn't expect the fan minimum to change just | |
361 | because the divisor changed. */ | |
362 | static ssize_t set_fan_div(struct device *dev, const char *buf, | |
363 | size_t count, int nr) | |
364 | { | |
365 | struct i2c_client *client = to_i2c_client(dev); | |
366 | struct lm78_data *data = i2c_get_clientdata(client); | |
367 | unsigned long val = simple_strtoul(buf, NULL, 10); | |
368 | unsigned long min; | |
369 | u8 reg; | |
370 | ||
371 | down(&data->update_lock); | |
372 | min = FAN_FROM_REG(data->fan_min[nr], | |
373 | DIV_FROM_REG(data->fan_div[nr])); | |
374 | ||
375 | switch (val) { | |
376 | case 1: data->fan_div[nr] = 0; break; | |
377 | case 2: data->fan_div[nr] = 1; break; | |
378 | case 4: data->fan_div[nr] = 2; break; | |
379 | case 8: data->fan_div[nr] = 3; break; | |
380 | default: | |
381 | dev_err(&client->dev, "fan_div value %ld not " | |
382 | "supported. Choose one of 1, 2, 4 or 8!\n", val); | |
383 | up(&data->update_lock); | |
384 | return -EINVAL; | |
385 | } | |
386 | ||
387 | reg = lm78_read_value(client, LM78_REG_VID_FANDIV); | |
388 | switch (nr) { | |
389 | case 0: | |
390 | reg = (reg & 0xcf) | (data->fan_div[nr] << 4); | |
391 | break; | |
392 | case 1: | |
393 | reg = (reg & 0x3f) | (data->fan_div[nr] << 6); | |
394 | break; | |
395 | } | |
396 | lm78_write_value(client, LM78_REG_VID_FANDIV, reg); | |
397 | ||
398 | data->fan_min[nr] = | |
399 | FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); | |
400 | lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); | |
401 | up(&data->update_lock); | |
402 | ||
403 | return count; | |
404 | } | |
405 | ||
406 | #define show_fan_offset(offset) \ | |
8627f9ba | 407 | static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
408 | { \ |
409 | return show_fan(dev, buf, offset - 1); \ | |
410 | } \ | |
8627f9ba | 411 | static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
412 | { \ |
413 | return show_fan_min(dev, buf, offset - 1); \ | |
414 | } \ | |
8627f9ba | 415 | static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
416 | { \ |
417 | return show_fan_div(dev, buf, offset - 1); \ | |
418 | } \ | |
8627f9ba | 419 | static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ |
1da177e4 LT |
420 | const char *buf, size_t count) \ |
421 | { \ | |
422 | return set_fan_min(dev, buf, count, offset - 1); \ | |
423 | } \ | |
424 | static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ | |
425 | static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ | |
426 | show_fan_##offset##_min, set_fan_##offset##_min); | |
427 | ||
8627f9ba | 428 | static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf, |
1da177e4 LT |
429 | size_t count) |
430 | { | |
431 | return set_fan_div(dev, buf, count, 0) ; | |
432 | } | |
433 | ||
8627f9ba | 434 | static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf, |
1da177e4 LT |
435 | size_t count) |
436 | { | |
437 | return set_fan_div(dev, buf, count, 1) ; | |
438 | } | |
439 | ||
440 | show_fan_offset(1); | |
441 | show_fan_offset(2); | |
442 | show_fan_offset(3); | |
443 | ||
444 | /* Fan 3 divisor is locked in H/W */ | |
445 | static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, | |
446 | show_fan_1_div, set_fan_1_div); | |
447 | static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, | |
448 | show_fan_2_div, set_fan_2_div); | |
449 | static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL); | |
450 | ||
451 | /* VID */ | |
8627f9ba | 452 | static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
453 | { |
454 | struct lm78_data *data = lm78_update_device(dev); | |
d0d3cd69 | 455 | return sprintf(buf, "%d\n", vid_from_reg(data->vid, 82)); |
1da177e4 LT |
456 | } |
457 | static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); | |
458 | ||
459 | /* Alarms */ | |
8627f9ba | 460 | static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
461 | { |
462 | struct lm78_data *data = lm78_update_device(dev); | |
463 | return sprintf(buf, "%u\n", data->alarms); | |
464 | } | |
465 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
466 | ||
467 | /* This function is called when: | |
468 | * lm78_driver is inserted (when this module is loaded), for each | |
469 | available adapter | |
470 | * when a new adapter is inserted (and lm78_driver is still present) */ | |
471 | static int lm78_attach_adapter(struct i2c_adapter *adapter) | |
472 | { | |
473 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
474 | return 0; | |
2ed2dc3c | 475 | return i2c_probe(adapter, &addr_data, lm78_detect); |
1da177e4 LT |
476 | } |
477 | ||
2d8672c5 JD |
478 | static int lm78_isa_attach_adapter(struct i2c_adapter *adapter) |
479 | { | |
480 | return lm78_detect(adapter, isa_address, -1); | |
481 | } | |
482 | ||
2ed2dc3c | 483 | /* This function is called by i2c_probe */ |
d8d20615 | 484 | static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) |
1da177e4 LT |
485 | { |
486 | int i, err; | |
487 | struct i2c_client *new_client; | |
488 | struct lm78_data *data; | |
489 | const char *client_name = ""; | |
490 | int is_isa = i2c_is_isa_adapter(adapter); | |
491 | ||
492 | if (!is_isa && | |
493 | !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { | |
494 | err = -ENODEV; | |
495 | goto ERROR0; | |
496 | } | |
497 | ||
498 | /* Reserve the ISA region */ | |
499 | if (is_isa) | |
fde09509 | 500 | if (!request_region(address, LM78_EXTENT, |
cdaf7934 | 501 | lm78_isa_driver.driver.name)) { |
1da177e4 LT |
502 | err = -EBUSY; |
503 | goto ERROR0; | |
504 | } | |
505 | ||
506 | /* Probe whether there is anything available on this address. Already | |
507 | done for SMBus clients */ | |
508 | if (kind < 0) { | |
509 | if (is_isa) { | |
510 | ||
511 | #define REALLY_SLOW_IO | |
512 | /* We need the timeouts for at least some LM78-like | |
513 | chips. But only if we read 'undefined' registers. */ | |
514 | i = inb_p(address + 1); | |
515 | if (inb_p(address + 2) != i) { | |
516 | err = -ENODEV; | |
517 | goto ERROR1; | |
518 | } | |
519 | if (inb_p(address + 3) != i) { | |
520 | err = -ENODEV; | |
521 | goto ERROR1; | |
522 | } | |
523 | if (inb_p(address + 7) != i) { | |
524 | err = -ENODEV; | |
525 | goto ERROR1; | |
526 | } | |
527 | #undef REALLY_SLOW_IO | |
528 | ||
529 | /* Let's just hope nothing breaks here */ | |
530 | i = inb_p(address + 5) & 0x7f; | |
531 | outb_p(~i & 0x7f, address + 5); | |
532 | if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { | |
533 | outb_p(i, address + 5); | |
534 | err = -ENODEV; | |
535 | goto ERROR1; | |
536 | } | |
537 | } | |
538 | } | |
539 | ||
540 | /* OK. For now, we presume we have a valid client. We now create the | |
541 | client structure, even though we cannot fill it completely yet. | |
542 | But it allows us to access lm78_{read,write}_value. */ | |
543 | ||
ba9c2e8d | 544 | if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { |
1da177e4 LT |
545 | err = -ENOMEM; |
546 | goto ERROR1; | |
547 | } | |
1da177e4 LT |
548 | |
549 | new_client = &data->client; | |
550 | if (is_isa) | |
551 | init_MUTEX(&data->lock); | |
552 | i2c_set_clientdata(new_client, data); | |
553 | new_client->addr = address; | |
554 | new_client->adapter = adapter; | |
fde09509 | 555 | new_client->driver = is_isa ? &lm78_isa_driver : &lm78_driver; |
1da177e4 LT |
556 | new_client->flags = 0; |
557 | ||
558 | /* Now, we do the remaining detection. */ | |
559 | if (kind < 0) { | |
560 | if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) { | |
561 | err = -ENODEV; | |
562 | goto ERROR2; | |
563 | } | |
564 | if (!is_isa && (lm78_read_value( | |
565 | new_client, LM78_REG_I2C_ADDR) != address)) { | |
566 | err = -ENODEV; | |
567 | goto ERROR2; | |
568 | } | |
569 | } | |
570 | ||
571 | /* Determine the chip type. */ | |
572 | if (kind <= 0) { | |
573 | i = lm78_read_value(new_client, LM78_REG_CHIPID); | |
27fe048e JD |
574 | if (i == 0x00 || i == 0x20 /* LM78 */ |
575 | || i == 0x40) /* LM78-J */ | |
1da177e4 | 576 | kind = lm78; |
1da177e4 LT |
577 | else if ((i & 0xfe) == 0xc0) |
578 | kind = lm79; | |
579 | else { | |
580 | if (kind == 0) | |
581 | dev_warn(&adapter->dev, "Ignoring 'force' " | |
582 | "parameter for unknown chip at " | |
583 | "adapter %d, address 0x%02x\n", | |
584 | i2c_adapter_id(adapter), address); | |
585 | err = -ENODEV; | |
586 | goto ERROR2; | |
587 | } | |
588 | } | |
589 | ||
590 | if (kind == lm78) { | |
591 | client_name = "lm78"; | |
1da177e4 LT |
592 | } else if (kind == lm79) { |
593 | client_name = "lm79"; | |
594 | } | |
595 | ||
596 | /* Fill in the remaining client fields and put into the global list */ | |
597 | strlcpy(new_client->name, client_name, I2C_NAME_SIZE); | |
598 | data->type = kind; | |
599 | ||
600 | data->valid = 0; | |
601 | init_MUTEX(&data->update_lock); | |
602 | ||
603 | /* Tell the I2C layer a new client has arrived */ | |
604 | if ((err = i2c_attach_client(new_client))) | |
605 | goto ERROR2; | |
606 | ||
607 | /* Initialize the LM78 chip */ | |
608 | lm78_init_client(new_client); | |
609 | ||
610 | /* A few vars need to be filled upon startup */ | |
611 | for (i = 0; i < 3; i++) { | |
612 | data->fan_min[i] = lm78_read_value(new_client, | |
613 | LM78_REG_FAN_MIN(i)); | |
614 | } | |
615 | ||
616 | /* Register sysfs hooks */ | |
943b0830 MH |
617 | data->class_dev = hwmon_device_register(&new_client->dev); |
618 | if (IS_ERR(data->class_dev)) { | |
619 | err = PTR_ERR(data->class_dev); | |
620 | goto ERROR3; | |
621 | } | |
622 | ||
1da177e4 LT |
623 | device_create_file(&new_client->dev, &dev_attr_in0_input); |
624 | device_create_file(&new_client->dev, &dev_attr_in0_min); | |
625 | device_create_file(&new_client->dev, &dev_attr_in0_max); | |
626 | device_create_file(&new_client->dev, &dev_attr_in1_input); | |
627 | device_create_file(&new_client->dev, &dev_attr_in1_min); | |
628 | device_create_file(&new_client->dev, &dev_attr_in1_max); | |
629 | device_create_file(&new_client->dev, &dev_attr_in2_input); | |
630 | device_create_file(&new_client->dev, &dev_attr_in2_min); | |
631 | device_create_file(&new_client->dev, &dev_attr_in2_max); | |
632 | device_create_file(&new_client->dev, &dev_attr_in3_input); | |
633 | device_create_file(&new_client->dev, &dev_attr_in3_min); | |
634 | device_create_file(&new_client->dev, &dev_attr_in3_max); | |
635 | device_create_file(&new_client->dev, &dev_attr_in4_input); | |
636 | device_create_file(&new_client->dev, &dev_attr_in4_min); | |
637 | device_create_file(&new_client->dev, &dev_attr_in4_max); | |
638 | device_create_file(&new_client->dev, &dev_attr_in5_input); | |
639 | device_create_file(&new_client->dev, &dev_attr_in5_min); | |
640 | device_create_file(&new_client->dev, &dev_attr_in5_max); | |
641 | device_create_file(&new_client->dev, &dev_attr_in6_input); | |
642 | device_create_file(&new_client->dev, &dev_attr_in6_min); | |
643 | device_create_file(&new_client->dev, &dev_attr_in6_max); | |
644 | device_create_file(&new_client->dev, &dev_attr_temp1_input); | |
645 | device_create_file(&new_client->dev, &dev_attr_temp1_max); | |
646 | device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); | |
647 | device_create_file(&new_client->dev, &dev_attr_fan1_input); | |
648 | device_create_file(&new_client->dev, &dev_attr_fan1_min); | |
649 | device_create_file(&new_client->dev, &dev_attr_fan1_div); | |
650 | device_create_file(&new_client->dev, &dev_attr_fan2_input); | |
651 | device_create_file(&new_client->dev, &dev_attr_fan2_min); | |
652 | device_create_file(&new_client->dev, &dev_attr_fan2_div); | |
653 | device_create_file(&new_client->dev, &dev_attr_fan3_input); | |
654 | device_create_file(&new_client->dev, &dev_attr_fan3_min); | |
655 | device_create_file(&new_client->dev, &dev_attr_fan3_div); | |
656 | device_create_file(&new_client->dev, &dev_attr_alarms); | |
657 | device_create_file(&new_client->dev, &dev_attr_cpu0_vid); | |
658 | ||
659 | return 0; | |
660 | ||
943b0830 MH |
661 | ERROR3: |
662 | i2c_detach_client(new_client); | |
1da177e4 LT |
663 | ERROR2: |
664 | kfree(data); | |
665 | ERROR1: | |
666 | if (is_isa) | |
667 | release_region(address, LM78_EXTENT); | |
668 | ERROR0: | |
669 | return err; | |
670 | } | |
671 | ||
672 | static int lm78_detach_client(struct i2c_client *client) | |
673 | { | |
943b0830 | 674 | struct lm78_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
675 | int err; |
676 | ||
943b0830 MH |
677 | hwmon_device_unregister(data->class_dev); |
678 | ||
7bef5594 | 679 | if ((err = i2c_detach_client(client))) |
1da177e4 | 680 | return err; |
1da177e4 LT |
681 | |
682 | if(i2c_is_isa_client(client)) | |
683 | release_region(client->addr, LM78_EXTENT); | |
684 | ||
943b0830 | 685 | kfree(data); |
1da177e4 LT |
686 | |
687 | return 0; | |
688 | } | |
689 | ||
44bbe87e | 690 | /* The SMBus locks itself, but ISA access must be locked explicitly! |
1da177e4 LT |
691 | We don't want to lock the whole ISA bus, so we lock each client |
692 | separately. | |
693 | We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, | |
694 | would slow down the LM78 access and should not be necessary. */ | |
695 | static int lm78_read_value(struct i2c_client *client, u8 reg) | |
696 | { | |
697 | int res; | |
698 | if (i2c_is_isa_client(client)) { | |
699 | struct lm78_data *data = i2c_get_clientdata(client); | |
700 | down(&data->lock); | |
701 | outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); | |
702 | res = inb_p(client->addr + LM78_DATA_REG_OFFSET); | |
703 | up(&data->lock); | |
704 | return res; | |
705 | } else | |
706 | return i2c_smbus_read_byte_data(client, reg); | |
707 | } | |
708 | ||
44bbe87e | 709 | /* The SMBus locks itself, but ISA access muse be locked explicitly! |
1da177e4 LT |
710 | We don't want to lock the whole ISA bus, so we lock each client |
711 | separately. | |
712 | We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, | |
713 | would slow down the LM78 access and should not be necessary. | |
714 | There are some ugly typecasts here, but the good new is - they should | |
715 | nowhere else be necessary! */ | |
716 | static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) | |
717 | { | |
718 | if (i2c_is_isa_client(client)) { | |
719 | struct lm78_data *data = i2c_get_clientdata(client); | |
720 | down(&data->lock); | |
721 | outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); | |
722 | outb_p(value, client->addr + LM78_DATA_REG_OFFSET); | |
723 | up(&data->lock); | |
724 | return 0; | |
725 | } else | |
726 | return i2c_smbus_write_byte_data(client, reg, value); | |
727 | } | |
728 | ||
1da177e4 LT |
729 | static void lm78_init_client(struct i2c_client *client) |
730 | { | |
731 | u8 config = lm78_read_value(client, LM78_REG_CONFIG); | |
732 | ||
733 | /* Start monitoring */ | |
734 | if (!(config & 0x01)) | |
735 | lm78_write_value(client, LM78_REG_CONFIG, | |
736 | (config & 0xf7) | 0x01); | |
737 | } | |
738 | ||
739 | static struct lm78_data *lm78_update_device(struct device *dev) | |
740 | { | |
741 | struct i2c_client *client = to_i2c_client(dev); | |
742 | struct lm78_data *data = i2c_get_clientdata(client); | |
743 | int i; | |
744 | ||
745 | down(&data->update_lock); | |
746 | ||
747 | if (time_after(jiffies, data->last_updated + HZ + HZ / 2) | |
748 | || !data->valid) { | |
749 | ||
750 | dev_dbg(&client->dev, "Starting lm78 update\n"); | |
751 | ||
752 | for (i = 0; i <= 6; i++) { | |
753 | data->in[i] = | |
754 | lm78_read_value(client, LM78_REG_IN(i)); | |
755 | data->in_min[i] = | |
756 | lm78_read_value(client, LM78_REG_IN_MIN(i)); | |
757 | data->in_max[i] = | |
758 | lm78_read_value(client, LM78_REG_IN_MAX(i)); | |
759 | } | |
760 | for (i = 0; i < 3; i++) { | |
761 | data->fan[i] = | |
762 | lm78_read_value(client, LM78_REG_FAN(i)); | |
763 | data->fan_min[i] = | |
764 | lm78_read_value(client, LM78_REG_FAN_MIN(i)); | |
765 | } | |
766 | data->temp = lm78_read_value(client, LM78_REG_TEMP); | |
767 | data->temp_over = | |
768 | lm78_read_value(client, LM78_REG_TEMP_OVER); | |
769 | data->temp_hyst = | |
770 | lm78_read_value(client, LM78_REG_TEMP_HYST); | |
771 | i = lm78_read_value(client, LM78_REG_VID_FANDIV); | |
772 | data->vid = i & 0x0f; | |
773 | if (data->type == lm79) | |
774 | data->vid |= | |
775 | (lm78_read_value(client, LM78_REG_CHIPID) & | |
776 | 0x01) << 4; | |
777 | else | |
778 | data->vid |= 0x10; | |
779 | data->fan_div[0] = (i >> 4) & 0x03; | |
780 | data->fan_div[1] = i >> 6; | |
781 | data->alarms = lm78_read_value(client, LM78_REG_ALARM1) + | |
782 | (lm78_read_value(client, LM78_REG_ALARM2) << 8); | |
783 | data->last_updated = jiffies; | |
784 | data->valid = 1; | |
785 | ||
786 | data->fan_div[2] = 1; | |
787 | } | |
788 | ||
789 | up(&data->update_lock); | |
790 | ||
791 | return data; | |
792 | } | |
793 | ||
794 | static int __init sm_lm78_init(void) | |
795 | { | |
fde09509 JD |
796 | int res; |
797 | ||
798 | res = i2c_add_driver(&lm78_driver); | |
799 | if (res) | |
800 | return res; | |
801 | ||
802 | res = i2c_isa_add_driver(&lm78_isa_driver); | |
803 | if (res) { | |
804 | i2c_del_driver(&lm78_driver); | |
805 | return res; | |
806 | } | |
807 | ||
808 | return 0; | |
1da177e4 LT |
809 | } |
810 | ||
811 | static void __exit sm_lm78_exit(void) | |
812 | { | |
fde09509 | 813 | i2c_isa_del_driver(&lm78_isa_driver); |
1da177e4 LT |
814 | i2c_del_driver(&lm78_driver); |
815 | } | |
816 | ||
817 | ||
818 | ||
819 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); | |
27fe048e | 820 | MODULE_DESCRIPTION("LM78/LM79 driver"); |
1da177e4 LT |
821 | MODULE_LICENSE("GPL"); |
822 | ||
823 | module_init(sm_lm78_init); | |
824 | module_exit(sm_lm78_exit); |