[linux-2.6-block.git] / drivers / hwmon / lineage-pem.c

/*
 * Driver for Lineage Compact Power Line series of power entry modules.
 *
 * Copyright (C) 2010, 2011 Ericsson AB.
 *
 * Documentation:
 *  http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>

/*
 * This driver supports various Lineage Compact Power Line DC/DC and AC/DC
 * converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
 *
 * The devices are nominally PMBus compliant. However, most standard PMBus
 * commands are not supported. Specifically, all hardware monitoring and
 * status reporting commands are non-standard. For this reason, a standard
 * PMBus driver can not be used.
 *
 * All Lineage CPL devices have a built-in I2C bus master selector (PCA9541).
 * To ensure device access, this driver should only be used as client driver
 * to the pca9541 I2C master selector driver.
 */

/* Command codes */
#define PEM_OPERATION		0x01
#define PEM_CLEAR_INFO_FLAGS	0x03
#define PEM_VOUT_COMMAND	0x21
#define PEM_VOUT_OV_FAULT_LIMIT	0x40
#define PEM_READ_DATA_STRING	0xd0
#define PEM_READ_INPUT_STRING	0xdc
#define PEM_READ_FIRMWARE_REV	0xdd
#define PEM_READ_RUN_TIMER	0xde
#define PEM_FAN_HI_SPEED	0xdf
#define PEM_FAN_NORMAL_SPEED	0xe0
#define PEM_READ_FAN_SPEED	0xe1

/* offsets in data string */
#define PEM_DATA_STATUS_2	0
#define PEM_DATA_STATUS_1	1
#define PEM_DATA_ALARM_2	2
#define PEM_DATA_ALARM_1	3
#define PEM_DATA_VOUT_LSB	4
#define PEM_DATA_VOUT_MSB	5
#define PEM_DATA_CURRENT	6
#define PEM_DATA_TEMP		7

/* Virtual entries, to report constants */
#define PEM_DATA_TEMP_MAX	10
#define PEM_DATA_TEMP_CRIT	11

/* offsets in input string */
#define PEM_INPUT_VOLTAGE	0
#define PEM_INPUT_POWER_LSB	1
#define PEM_INPUT_POWER_MSB	2

/* offsets in fan data */
#define PEM_FAN_ADJUSTMENT	0
#define PEM_FAN_FAN1		1
#define PEM_FAN_FAN2		2
#define PEM_FAN_FAN3		3

/* Status register bits */
#define STS1_OUTPUT_ON		(1 << 0)
#define STS1_LEDS_FLASHING	(1 << 1)
#define STS1_EXT_FAULT		(1 << 2)
#define STS1_SERVICE_LED_ON	(1 << 3)
#define STS1_SHUTDOWN_OCCURRED	(1 << 4)
#define STS1_INT_FAULT		(1 << 5)
#define STS1_ISOLATION_TEST_OK	(1 << 6)

#define STS2_ENABLE_PIN_HI	(1 << 0)
#define STS2_DATA_OUT_RANGE	(1 << 1)
#define STS2_RESTARTED_OK	(1 << 1)
#define STS2_ISOLATION_TEST_FAIL (1 << 3)
#define STS2_HIGH_POWER_CAP	(1 << 4)
#define STS2_INVALID_INSTR	(1 << 5)
#define STS2_WILL_RESTART	(1 << 6)
#define STS2_PEC_ERR		(1 << 7)

/* Alarm register bits */
#define ALRM1_VIN_OUT_LIMIT	(1 << 0)
#define ALRM1_VOUT_OUT_LIMIT	(1 << 1)
#define ALRM1_OV_VOLT_SHUTDOWN	(1 << 2)
#define ALRM1_VIN_OVERCURRENT	(1 << 3)
#define ALRM1_TEMP_WARNING	(1 << 4)
#define ALRM1_TEMP_SHUTDOWN	(1 << 5)
#define ALRM1_PRIMARY_FAULT	(1 << 6)
#define ALRM1_POWER_LIMIT	(1 << 7)

#define ALRM2_5V_OUT_LIMIT	(1 << 1)
#define ALRM2_TEMP_FAULT	(1 << 2)
#define ALRM2_OV_LOW		(1 << 3)
#define ALRM2_DCDC_TEMP_HIGH	(1 << 4)
#define ALRM2_PRI_TEMP_HIGH	(1 << 5)
#define ALRM2_NO_PRIMARY	(1 << 6)
#define ALRM2_FAN_FAULT		(1 << 7)

#define FIRMWARE_REV_LEN	4
#define DATA_STRING_LEN		9
#define INPUT_STRING_LEN	5	/* 4 for most devices	*/
#define FAN_SPEED_LEN		5

struct pem_data {
	struct i2c_client *client;
	const struct attribute_group *groups[4];

	struct mutex update_lock;
	bool valid;
	bool fans_supported;
	int input_length;
	unsigned long last_updated;	/* in jiffies */

	u8 firmware_rev[FIRMWARE_REV_LEN];
	u8 data_string[DATA_STRING_LEN];
	u8 input_string[INPUT_STRING_LEN];
	u8 fan_speed[FAN_SPEED_LEN];
};

static int pem_read_block(struct i2c_client *client, u8 command, u8 *data,
			  int data_len)
{
	u8 block_buffer[I2C_SMBUS_BLOCK_MAX];
	int result;

	result = i2c_smbus_read_block_data(client, command, block_buffer);
	if (unlikely(result < 0))
		goto abort;
	if (unlikely(result == 0xff || result != data_len)) {
		result = -EIO;
		goto abort;
	}
	memcpy(data, block_buffer, data_len);
	result = 0;
abort:
	return result;
}

static struct pem_data *pem_update_device(struct device *dev)
{
	struct pem_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	struct pem_data *ret = data;

	mutex_lock(&data->update_lock);

	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
		int result;

		/* Read data string */
		result = pem_read_block(client, PEM_READ_DATA_STRING,
					data->data_string,
					sizeof(data->data_string));
		if (unlikely(result < 0)) {
			ret = ERR_PTR(result);
			goto abort;
		}

		/* Read input string */
		if (data->input_length) {
			result = pem_read_block(client, PEM_READ_INPUT_STRING,
						data->input_string,
						data->input_length);
			if (unlikely(result < 0)) {
				ret = ERR_PTR(result);
				goto abort;
			}
		}

		/* Read fan speeds */
		if (data->fans_supported) {
			result = pem_read_block(client, PEM_READ_FAN_SPEED,
						data->fan_speed,
						sizeof(data->fan_speed));
			if (unlikely(result < 0)) {
				ret = ERR_PTR(result);
				goto abort;
			}
		}

		i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);

		data->last_updated = jiffies;
		data->valid = 1;
	}
abort:
	mutex_unlock(&data->update_lock);
	return ret;
}

static long pem_get_data(u8 *data, int len, int index)
{
	long val;

	switch (index) {
	case PEM_DATA_VOUT_LSB:
		val = (data[index] + (data[index+1] << 8)) * 5 / 2;
		break;
	case PEM_DATA_CURRENT:
		val = data[index] * 200;
		break;
	case PEM_DATA_TEMP:
		val = data[index] * 1000;
		break;
	case PEM_DATA_TEMP_MAX:
		val = 97 * 1000;	/* 97 degrees C per datasheet */
		break;
	case PEM_DATA_TEMP_CRIT:
		val = 107 * 1000;	/* 107 degrees C per datasheet */
		break;
	default:
		WARN_ON_ONCE(1);
		val = 0;
	}
	return val;
}

static long pem_get_input(u8 *data, int len, int index)
{
	long val;

	switch (index) {
	case PEM_INPUT_VOLTAGE:
		if (len == INPUT_STRING_LEN)
			val = (data[index] + (data[index+1] << 8) - 75) * 1000;
		else
			val = (data[index] - 75) * 1000;
		break;
	case PEM_INPUT_POWER_LSB:
		if (len == INPUT_STRING_LEN)
			index++;
		val = (data[index] + (data[index+1] << 8)) * 1000000L;
		break;
	default:
		WARN_ON_ONCE(1);
		val = 0;
	}
	return val;
}

static long pem_get_fan(u8 *data, int len, int index)
{
	long val;

	switch (index) {
	case PEM_FAN_FAN1:
	case PEM_FAN_FAN2:
	case PEM_FAN_FAN3:
		val = data[index] * 100;
		break;
	default:
		WARN_ON_ONCE(1);
		val = 0;
	}
	return val;
}

/*
 * Show boolean, either a fault or an alarm.
 * .nr points to the register, .index is the bit mask to check
 */
static ssize_t pem_bool_show(struct device *dev, struct device_attribute *da,
			     char *buf)
{
	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
	struct pem_data *data = pem_update_device(dev);
	u8 status;

	if (IS_ERR(data))
		return PTR_ERR(data);

	status = data->data_string[attr->nr] & attr->index;
	return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
}

static ssize_t pem_data_show(struct device *dev, struct device_attribute *da,
			     char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct pem_data *data = pem_update_device(dev);
	long value;

	if (IS_ERR(data))
		return PTR_ERR(data);

	value = pem_get_data(data->data_string, sizeof(data->data_string),
			     attr->index);

	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
}

static ssize_t pem_input_show(struct device *dev, struct device_attribute *da,
			      char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct pem_data *data = pem_update_device(dev);
	long value;

	if (IS_ERR(data))
		return PTR_ERR(data);

	value = pem_get_input(data->input_string, sizeof(data->input_string),
			      attr->index);

	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
}

static ssize_t pem_fan_show(struct device *dev, struct device_attribute *da,
			    char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct pem_data *data = pem_update_device(dev);
	long value;

	if (IS_ERR(data))
		return PTR_ERR(data);

	value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
			    attr->index);

	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
}

/* Voltages */
static SENSOR_DEVICE_ATTR_RO(in1_input, pem_data, PEM_DATA_VOUT_LSB);
static SENSOR_DEVICE_ATTR_2_RO(in1_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_VOUT_OUT_LIMIT);
static SENSOR_DEVICE_ATTR_2_RO(in1_crit_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_OV_VOLT_SHUTDOWN);
static SENSOR_DEVICE_ATTR_RO(in2_input, pem_input, PEM_INPUT_VOLTAGE);
static SENSOR_DEVICE_ATTR_2_RO(in2_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_VIN_OUT_LIMIT | ALRM1_PRIMARY_FAULT);

/* Currents */
static SENSOR_DEVICE_ATTR_RO(curr1_input, pem_data, PEM_DATA_CURRENT);
static SENSOR_DEVICE_ATTR_2_RO(curr1_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_VIN_OVERCURRENT);

/* Power */
static SENSOR_DEVICE_ATTR_RO(power1_input, pem_input, PEM_INPUT_POWER_LSB);
static SENSOR_DEVICE_ATTR_2_RO(power1_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_POWER_LIMIT);

/* Fans */
static SENSOR_DEVICE_ATTR_RO(fan1_input, pem_fan, PEM_FAN_FAN1);
static SENSOR_DEVICE_ATTR_RO(fan2_input, pem_fan, PEM_FAN_FAN2);
static SENSOR_DEVICE_ATTR_RO(fan3_input, pem_fan, PEM_FAN_FAN3);
static SENSOR_DEVICE_ATTR_2_RO(fan1_alarm, pem_bool, PEM_DATA_ALARM_2,
			       ALRM2_FAN_FAULT);

/* Temperatures */
static SENSOR_DEVICE_ATTR_RO(temp1_input, pem_data, PEM_DATA_TEMP);
static SENSOR_DEVICE_ATTR_RO(temp1_max, pem_data, PEM_DATA_TEMP_MAX);
static SENSOR_DEVICE_ATTR_RO(temp1_crit, pem_data, PEM_DATA_TEMP_CRIT);
static SENSOR_DEVICE_ATTR_2_RO(temp1_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_TEMP_WARNING);
static SENSOR_DEVICE_ATTR_2_RO(temp1_crit_alarm, pem_bool, PEM_DATA_ALARM_1,
			       ALRM1_TEMP_SHUTDOWN);
static SENSOR_DEVICE_ATTR_2_RO(temp1_fault, pem_bool, PEM_DATA_ALARM_2,
			       ALRM2_TEMP_FAULT);

static struct attribute *pem_attributes[] = {
	&sensor_dev_attr_in1_input.dev_attr.attr,
	&sensor_dev_attr_in1_alarm.dev_attr.attr,
	&sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_in2_alarm.dev_attr.attr,

	&sensor_dev_attr_curr1_alarm.dev_attr.attr,

	&sensor_dev_attr_power1_alarm.dev_attr.attr,

	&sensor_dev_attr_fan1_alarm.dev_attr.attr,

	&sensor_dev_attr_temp1_input.dev_attr.attr,
	&sensor_dev_attr_temp1_max.dev_attr.attr,
	&sensor_dev_attr_temp1_crit.dev_attr.attr,
	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
	&sensor_dev_attr_temp1_fault.dev_attr.attr,

	NULL,
};

static const struct attribute_group pem_group = {
	.attrs = pem_attributes,
};

static struct attribute *pem_input_attributes[] = {
	&sensor_dev_attr_in2_input.dev_attr.attr,
	&sensor_dev_attr_curr1_input.dev_attr.attr,
	&sensor_dev_attr_power1_input.dev_attr.attr,
	NULL
};

static const struct attribute_group pem_input_group = {
	.attrs = pem_input_attributes,
};

static struct attribute *pem_fan_attributes[] = {
	&sensor_dev_attr_fan1_input.dev_attr.attr,
	&sensor_dev_attr_fan2_input.dev_attr.attr,
	&sensor_dev_attr_fan3_input.dev_attr.attr,
	NULL
};

static const struct attribute_group pem_fan_group = {
	.attrs = pem_fan_attributes,
};

static int pem_probe(struct i2c_client *client,
		     const struct i2c_device_id *id)
{
	struct i2c_adapter *adapter = client->adapter;
	struct device *dev = &client->dev;
	struct device *hwmon_dev;
	struct pem_data *data;
	int ret, idx = 0;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
				     | I2C_FUNC_SMBUS_WRITE_BYTE))
		return -ENODEV;

	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	data->client = client;
	mutex_init(&data->update_lock);

	/*
	 * We use the next two commands to determine if the device is really
	 * there.
	 */
	ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
			     data->firmware_rev, sizeof(data->firmware_rev));
	if (ret < 0)
		return ret;

	ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
	if (ret < 0)
		return ret;

	dev_info(dev, "Firmware revision %d.%d.%d\n",
		 data->firmware_rev[0], data->firmware_rev[1],
		 data->firmware_rev[2]);

	/* sysfs hooks */
	data->groups[idx++] = &pem_group;

	/*
	 * Check if input readings are supported.
	 * This is the case if we can read input data,
	 * and if the returned data is not all zeros.
	 * Note that input alarms are always supported.
	 */
	ret = pem_read_block(client, PEM_READ_INPUT_STRING,
			     data->input_string,
			     sizeof(data->input_string) - 1);
	if (!ret && (data->input_string[0] || data->input_string[1] ||
		     data->input_string[2]))
		data->input_length = sizeof(data->input_string) - 1;
	else if (ret < 0) {
		/* Input string is one byte longer for some devices */
		ret = pem_read_block(client, PEM_READ_INPUT_STRING,
				    data->input_string,
				    sizeof(data->input_string));
		if (!ret && (data->input_string[0] || data->input_string[1] ||
			    data->input_string[2] || data->input_string[3]))
			data->input_length = sizeof(data->input_string);
	}

	if (data->input_length)
		data->groups[idx++] = &pem_input_group;

	/*
	 * Check if fan speed readings are supported.
	 * This is the case if we can read fan speed data,
	 * and if the returned data is not all zeros.
	 * Note that the fan alarm is always supported.
	 */
	ret = pem_read_block(client, PEM_READ_FAN_SPEED,
			     data->fan_speed,
			     sizeof(data->fan_speed));
	if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
		     data->fan_speed[2] || data->fan_speed[3])) {
		data->fans_supported = true;
		data->groups[idx++] = &pem_fan_group;
	}

	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
							   data, data->groups);
	return PTR_ERR_OR_ZERO(hwmon_dev);
}

static const struct i2c_device_id pem_id[] = {
	{"lineage_pem", 0},
	{}
};
MODULE_DEVICE_TABLE(i2c, pem_id);

static struct i2c_driver pem_driver = {
	.driver = {
		   .name = "lineage_pem",
		   },
	.probe = pem_probe,
	.id_table = pem_id,
};

module_i2c_driver(pem_driver);

MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
502b5a01 GR	1	/*
	2	* Driver for Lineage Compact Power Line series of power entry modules.
	3	*
	4	* Copyright (C) 2010, 2011 Ericsson AB.
	5	*
	6	* Documentation:
	7	* http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License as published by
	11	* the Free Software Foundation; either version 2 of the License, or
	12	* (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	22	*/
	23
	24	#include <linux/kernel.h>
	25	#include <linux/module.h>
	26	#include <linux/init.h>
	27	#include <linux/err.h>
	28	#include <linux/slab.h>
	29	#include <linux/i2c.h>
	30	#include <linux/hwmon.h>
	31	#include <linux/hwmon-sysfs.h>
dcd8f392	32	#include <linux/jiffies.h>
502b5a01 GR	33
	34	/*
	35	* This driver supports various Lineage Compact Power Line DC/DC and AC/DC
	36	* converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
	37	*
	38	* The devices are nominally PMBus compliant. However, most standard PMBus
	39	* commands are not supported. Specifically, all hardware monitoring and
	40	* status reporting commands are non-standard. For this reason, a standard
	41	* PMBus driver can not be used.
	42	*
	43	* All Lineage CPL devices have a built-in I2C bus master selector (PCA9541).
	44	* To ensure device access, this driver should only be used as client driver
	45	* to the pca9541 I2C master selector driver.
	46	*/
	47
	48	/* Command codes */
	49	#define PEM_OPERATION 0x01
	50	#define PEM_CLEAR_INFO_FLAGS 0x03
	51	#define PEM_VOUT_COMMAND 0x21
	52	#define PEM_VOUT_OV_FAULT_LIMIT 0x40
	53	#define PEM_READ_DATA_STRING 0xd0
	54	#define PEM_READ_INPUT_STRING 0xdc
	55	#define PEM_READ_FIRMWARE_REV 0xdd
	56	#define PEM_READ_RUN_TIMER 0xde
	57	#define PEM_FAN_HI_SPEED 0xdf
	58	#define PEM_FAN_NORMAL_SPEED 0xe0
	59	#define PEM_READ_FAN_SPEED 0xe1
	60
	61	/* offsets in data string */
	62	#define PEM_DATA_STATUS_2 0
	63	#define PEM_DATA_STATUS_1 1
	64	#define PEM_DATA_ALARM_2 2
	65	#define PEM_DATA_ALARM_1 3
	66	#define PEM_DATA_VOUT_LSB 4
	67	#define PEM_DATA_VOUT_MSB 5
	68	#define PEM_DATA_CURRENT 6
	69	#define PEM_DATA_TEMP 7
	70
	71	/* Virtual entries, to report constants */
	72	#define PEM_DATA_TEMP_MAX 10
	73	#define PEM_DATA_TEMP_CRIT 11
	74
	75	/* offsets in input string */
	76	#define PEM_INPUT_VOLTAGE 0
	77	#define PEM_INPUT_POWER_LSB 1
	78	#define PEM_INPUT_POWER_MSB 2
	79
	80	/* offsets in fan data */
	81	#define PEM_FAN_ADJUSTMENT 0
	82	#define PEM_FAN_FAN1 1
	83	#define PEM_FAN_FAN2 2
	84	#define PEM_FAN_FAN3 3
	85
	86	/* Status register bits */
	87	#define STS1_OUTPUT_ON (1 << 0)
	88	#define STS1_LEDS_FLASHING (1 << 1)
	89	#define STS1_EXT_FAULT (1 << 2)
	90	#define STS1_SERVICE_LED_ON (1 << 3)
	91	#define STS1_SHUTDOWN_OCCURRED (1 << 4)
	92	#define STS1_INT_FAULT (1 << 5)
	93	#define STS1_ISOLATION_TEST_OK (1 << 6)
	94
	95	#define STS2_ENABLE_PIN_HI (1 << 0)
	96	#define STS2_DATA_OUT_RANGE (1 << 1)
97	#define STS2_RESTARTED_OK (1 << 1)
98	#define STS2_ISOLATION_TEST_FAIL (1 << 3)
99	#define STS2_HIGH_POWER_CAP (1 << 4)
100	#define STS2_INVALID_INSTR (1 << 5)
101	#define STS2_WILL_RESTART (1 << 6)
102	#define STS2_PEC_ERR (1 << 7)
103
104	/* Alarm register bits */
105	#define ALRM1_VIN_OUT_LIMIT (1 << 0)
106	#define ALRM1_VOUT_OUT_LIMIT (1 << 1)
107	#define ALRM1_OV_VOLT_SHUTDOWN (1 << 2)
108	#define ALRM1_VIN_OVERCURRENT (1 << 3)
109	#define ALRM1_TEMP_WARNING (1 << 4)
110	#define ALRM1_TEMP_SHUTDOWN (1 << 5)
111	#define ALRM1_PRIMARY_FAULT (1 << 6)
112	#define ALRM1_POWER_LIMIT (1 << 7)
113
114	#define ALRM2_5V_OUT_LIMIT (1 << 1)
115	#define ALRM2_TEMP_FAULT (1 << 2)
116	#define ALRM2_OV_LOW (1 << 3)
117	#define ALRM2_DCDC_TEMP_HIGH (1 << 4)
118	#define ALRM2_PRI_TEMP_HIGH (1 << 5)
119	#define ALRM2_NO_PRIMARY (1 << 6)
120	#define ALRM2_FAN_FAULT (1 << 7)
121
122	#define FIRMWARE_REV_LEN 4
123	#define DATA_STRING_LEN 9
124	#define INPUT_STRING_LEN 5 /* 4 for most devices */
125	#define FAN_SPEED_LEN 5
126
127	struct pem_data {
82803252 AL	128	struct i2c_client *client;
82803252 AL	129	const struct attribute_group *groups[4];
502b5a01 GR	130
	131	struct mutex update_lock;
	132	bool valid;
	133	bool fans_supported;
	134	int input_length;
	135	unsigned long last_updated; /* in jiffies */
	136
	137	u8 firmware_rev[FIRMWARE_REV_LEN];
	138	u8 data_string[DATA_STRING_LEN];
	139	u8 input_string[INPUT_STRING_LEN];
	140	u8 fan_speed[FAN_SPEED_LEN];
	141	};
	142
	143	static int pem_read_block(struct i2c_client client, u8 command, u8 data,
	144	int data_len)
	145	{
	146	u8 block_buffer[I2C_SMBUS_BLOCK_MAX];
	147	int result;
	148
	149	result = i2c_smbus_read_block_data(client, command, block_buffer);
	150	if (unlikely(result < 0))
	151	goto abort;
	152	if (unlikely(result == 0xff \|\| result != data_len)) {
	153	result = -EIO;
	154	goto abort;
	155	}
	156	memcpy(data, block_buffer, data_len);
	157	result = 0;
	158	abort:
	159	return result;
	160	}
	161
	162	static struct pem_data pem_update_device(struct device dev)
	163	{
82803252 AL	164	struct pem_data *data = dev_get_drvdata(dev);
82803252 AL	165	struct i2c_client *client = data->client;
502b5a01 GR	166	struct pem_data *ret = data;
	167
	168	mutex_lock(&data->update_lock);
	169
	170	if (time_after(jiffies, data->last_updated + HZ) \|\| !data->valid) {
	171	int result;
	172
	173	/* Read data string */
	174	result = pem_read_block(client, PEM_READ_DATA_STRING,
	175	data->data_string,
	176	sizeof(data->data_string));
	177	if (unlikely(result < 0)) {
	178	ret = ERR_PTR(result);
	179	goto abort;
	180	}
	181
	182	/* Read input string */
	183	if (data->input_length) {
	184	result = pem_read_block(client, PEM_READ_INPUT_STRING,
	185	data->input_string,
	186	data->input_length);
	187	if (unlikely(result < 0)) {
	188	ret = ERR_PTR(result);
	189	goto abort;
	190	}
	191	}
	192
	193	/* Read fan speeds */
	194	if (data->fans_supported) {
	195	result = pem_read_block(client, PEM_READ_FAN_SPEED,
	196	data->fan_speed,
	197	sizeof(data->fan_speed));
	198	if (unlikely(result < 0)) {
	199	ret = ERR_PTR(result);
	200	goto abort;
	201	}
	202	}
	203
	204	i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
	205
	206	data->last_updated = jiffies;
	207	data->valid = 1;
	208	}
	209	abort:
	210	mutex_unlock(&data->update_lock);
	211	return ret;
	212	}
	213
	214	static long pem_get_data(u8 *data, int len, int index)
	215	{
	216	long val;
	217
	218	switch (index) {
	219	case PEM_DATA_VOUT_LSB:
	220	val = (data[index] + (data[index+1] << 8)) * 5 / 2;
	221	break;
	222	case PEM_DATA_CURRENT:
	223	val = data[index] * 200;
	224	break;
	225	case PEM_DATA_TEMP:
	226	val = data[index] * 1000;
	227	break;
	228	case PEM_DATA_TEMP_MAX:
	229	val = 97 * 1000; /* 97 degrees C per datasheet */
230	break;
231	case PEM_DATA_TEMP_CRIT:
232	val = 107 * 1000; /* 107 degrees C per datasheet */
233	break;
234	default:
235	WARN_ON_ONCE(1);
236	val = 0;
237	}
238	return val;
239	}
240
241	static long pem_get_input(u8 *data, int len, int index)
242	{
243	long val;
244
245	switch (index) {
246	case PEM_INPUT_VOLTAGE:
247	if (len == INPUT_STRING_LEN)
248	val = (data[index] + (data[index+1] << 8) - 75) * 1000;
249	else
250	val = (data[index] - 75) * 1000;
251	break;
252	case PEM_INPUT_POWER_LSB:
253	if (len == INPUT_STRING_LEN)
254	index++;
255	val = (data[index] + (data[index+1] << 8)) * 1000000L;
256	break;
257	default:
258	WARN_ON_ONCE(1);
259	val = 0;
260	}
261	return val;
262	}
263
264	static long pem_get_fan(u8 *data, int len, int index)
265	{
266	long val;
267
268	switch (index) {
269	case PEM_FAN_FAN1:
270	case PEM_FAN_FAN2:
271	case PEM_FAN_FAN3:
272	val = data[index] * 100;
273	break;
274	default:
275	WARN_ON_ONCE(1);
276	val = 0;
277	}
278	return val;
279	}
280
281	/*
282	* Show boolean, either a fault or an alarm.
283	* .nr points to the register, .index is the bit mask to check
284	*/
6ccf6a83 GR	285	static ssize_t pem_bool_show(struct device dev, struct device_attribute da,
6ccf6a83 GR	286	char *buf)
502b5a01 GR	287	{
	288	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
	289	struct pem_data *data = pem_update_device(dev);
	290	u8 status;
	291
	292	if (IS_ERR(data))
	293	return PTR_ERR(data);
	294
	295	status = data->data_string[attr->nr] & attr->index;
	296	return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
	297	}
	298
6ccf6a83	299	static ssize_t pem_data_show(struct device dev, struct device_attribute da,
502b5a01 GR	300	char *buf)
	301	{
	302	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	303	struct pem_data *data = pem_update_device(dev);
	304	long value;
	305
	306	if (IS_ERR(data))
	307	return PTR_ERR(data);
	308
	309	value = pem_get_data(data->data_string, sizeof(data->data_string),
	310	attr->index);
	311
	312	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
	313	}
	314
6ccf6a83	315	static ssize_t pem_input_show(struct device dev, struct device_attribute da,
502b5a01 GR	316	char *buf)
	317	{
	318	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	319	struct pem_data *data = pem_update_device(dev);
	320	long value;
	321
	322	if (IS_ERR(data))
	323	return PTR_ERR(data);
	324
	325	value = pem_get_input(data->input_string, sizeof(data->input_string),
	326	attr->index);
	327
	328	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
	329	}
	330
6ccf6a83	331	static ssize_t pem_fan_show(struct device dev, struct device_attribute da,
502b5a01 GR	332	char *buf)
	333	{
	334	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	335	struct pem_data *data = pem_update_device(dev);
	336	long value;
	337
	338	if (IS_ERR(data))
	339	return PTR_ERR(data);
	340
	341	value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
	342	attr->index);
	343
	344	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
	345	}
	346
	347	/* Voltages */
6ccf6a83 GR	348	static SENSOR_DEVICE_ATTR_RO(in1_input, pem_data, PEM_DATA_VOUT_LSB);
	349	static SENSOR_DEVICE_ATTR_2_RO(in1_alarm, pem_bool, PEM_DATA_ALARM_1,
	350	ALRM1_VOUT_OUT_LIMIT);
	351	static SENSOR_DEVICE_ATTR_2_RO(in1_crit_alarm, pem_bool, PEM_DATA_ALARM_1,
	352	ALRM1_OV_VOLT_SHUTDOWN);
	353	static SENSOR_DEVICE_ATTR_RO(in2_input, pem_input, PEM_INPUT_VOLTAGE);
	354	static SENSOR_DEVICE_ATTR_2_RO(in2_alarm, pem_bool, PEM_DATA_ALARM_1,
	355	ALRM1_VIN_OUT_LIMIT \| ALRM1_PRIMARY_FAULT);
502b5a01 GR	356
502b5a01 GR	357	/* Currents */
6ccf6a83 GR	358	static SENSOR_DEVICE_ATTR_RO(curr1_input, pem_data, PEM_DATA_CURRENT);
	359	static SENSOR_DEVICE_ATTR_2_RO(curr1_alarm, pem_bool, PEM_DATA_ALARM_1,
	360	ALRM1_VIN_OVERCURRENT);
502b5a01 GR	361
502b5a01 GR	362	/* Power */
6ccf6a83 GR	363	static SENSOR_DEVICE_ATTR_RO(power1_input, pem_input, PEM_INPUT_POWER_LSB);
	364	static SENSOR_DEVICE_ATTR_2_RO(power1_alarm, pem_bool, PEM_DATA_ALARM_1,
	365	ALRM1_POWER_LIMIT);
502b5a01 GR	366
502b5a01 GR	367	/* Fans */
6ccf6a83 GR	368	static SENSOR_DEVICE_ATTR_RO(fan1_input, pem_fan, PEM_FAN_FAN1);
	369	static SENSOR_DEVICE_ATTR_RO(fan2_input, pem_fan, PEM_FAN_FAN2);
	370	static SENSOR_DEVICE_ATTR_RO(fan3_input, pem_fan, PEM_FAN_FAN3);
	371	static SENSOR_DEVICE_ATTR_2_RO(fan1_alarm, pem_bool, PEM_DATA_ALARM_2,
	372	ALRM2_FAN_FAULT);
502b5a01 GR	373
502b5a01 GR	374	/* Temperatures */
6ccf6a83 GR	375	static SENSOR_DEVICE_ATTR_RO(temp1_input, pem_data, PEM_DATA_TEMP);
	376	static SENSOR_DEVICE_ATTR_RO(temp1_max, pem_data, PEM_DATA_TEMP_MAX);
	377	static SENSOR_DEVICE_ATTR_RO(temp1_crit, pem_data, PEM_DATA_TEMP_CRIT);
	378	static SENSOR_DEVICE_ATTR_2_RO(temp1_alarm, pem_bool, PEM_DATA_ALARM_1,
	379	ALRM1_TEMP_WARNING);
	380	static SENSOR_DEVICE_ATTR_2_RO(temp1_crit_alarm, pem_bool, PEM_DATA_ALARM_1,
	381	ALRM1_TEMP_SHUTDOWN);
	382	static SENSOR_DEVICE_ATTR_2_RO(temp1_fault, pem_bool, PEM_DATA_ALARM_2,
	383	ALRM2_TEMP_FAULT);
502b5a01 GR	384
	385	static struct attribute *pem_attributes[] = {
	386	&sensor_dev_attr_in1_input.dev_attr.attr,
d668a8b0	387	&sensor_dev_attr_in1_alarm.dev_attr.attr,
502b5a01 GR	388	&sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
	389	&sensor_dev_attr_in2_alarm.dev_attr.attr,
	390
	391	&sensor_dev_attr_curr1_alarm.dev_attr.attr,
	392
	393	&sensor_dev_attr_power1_alarm.dev_attr.attr,
	394
	395	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
	396
	397	&sensor_dev_attr_temp1_input.dev_attr.attr,
	398	&sensor_dev_attr_temp1_max.dev_attr.attr,
	399	&sensor_dev_attr_temp1_crit.dev_attr.attr,
	400	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
	401	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
	402	&sensor_dev_attr_temp1_fault.dev_attr.attr,
	403
	404	NULL,
	405	};
	406
	407	static const struct attribute_group pem_group = {
	408	.attrs = pem_attributes,
	409	};
	410
	411	static struct attribute *pem_input_attributes[] = {
	412	&sensor_dev_attr_in2_input.dev_attr.attr,
	413	&sensor_dev_attr_curr1_input.dev_attr.attr,
	414	&sensor_dev_attr_power1_input.dev_attr.attr,
df069079	415	NULL
502b5a01 GR	416	};
	417
	418	static const struct attribute_group pem_input_group = {
	419	.attrs = pem_input_attributes,
	420	};
	421
	422	static struct attribute *pem_fan_attributes[] = {
	423	&sensor_dev_attr_fan1_input.dev_attr.attr,
	424	&sensor_dev_attr_fan2_input.dev_attr.attr,
	425	&sensor_dev_attr_fan3_input.dev_attr.attr,
df069079	426	NULL
502b5a01 GR	427	};
	428
	429	static const struct attribute_group pem_fan_group = {
	430	.attrs = pem_fan_attributes,
	431	};
	432
	433	static int pem_probe(struct i2c_client *client,
	434	const struct i2c_device_id *id)
	435	{
	436	struct i2c_adapter *adapter = client->adapter;
82803252 AL	437	struct device *dev = &client->dev;
82803252 AL	438	struct device *hwmon_dev;
502b5a01	439	struct pem_data *data;
82803252	440	int ret, idx = 0;
502b5a01 GR	441
	442	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
	443	\| I2C_FUNC_SMBUS_WRITE_BYTE))
	444	return -ENODEV;
	445
82803252	446	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
502b5a01 GR	447	if (!data)
	448	return -ENOMEM;
	449
82803252	450	data->client = client;
502b5a01 GR	451	mutex_init(&data->update_lock);
	452
	453	/*
	454	* We use the next two commands to determine if the device is really
	455	* there.
	456	*/
	457	ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
	458	data->firmware_rev, sizeof(data->firmware_rev));
	459	if (ret < 0)
07404aab	460	return ret;
502b5a01 GR	461
	462	ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
	463	if (ret < 0)
07404aab	464	return ret;
502b5a01	465
82803252	466	dev_info(dev, "Firmware revision %d.%d.%d\n",
502b5a01 GR	467	data->firmware_rev[0], data->firmware_rev[1],
	468	data->firmware_rev[2]);
	469
82803252 AL	470	/* sysfs hooks */
82803252 AL	471	data->groups[idx++] = &pem_group;
502b5a01 GR	472
	473	/*
	474	* Check if input readings are supported.
	475	* This is the case if we can read input data,
	476	* and if the returned data is not all zeros.
	477	* Note that input alarms are always supported.
	478	*/
	479	ret = pem_read_block(client, PEM_READ_INPUT_STRING,
	480	data->input_string,
	481	sizeof(data->input_string) - 1);
	482	if (!ret && (data->input_string[0] \|\| data->input_string[1] \|\|
	483	data->input_string[2]))
	484	data->input_length = sizeof(data->input_string) - 1;
	485	else if (ret < 0) {
	486	/* Input string is one byte longer for some devices */
	487	ret = pem_read_block(client, PEM_READ_INPUT_STRING,
	488	data->input_string,
	489	sizeof(data->input_string));
	490	if (!ret && (data->input_string[0] \|\| data->input_string[1] \|\|
	491	data->input_string[2] \|\| data->input_string[3]))
	492	data->input_length = sizeof(data->input_string);
	493	}
82803252 AL	494
	495	if (data->input_length)
	496	data->groups[idx++] = &pem_input_group;
502b5a01 GR	497
	498	/*
	499	* Check if fan speed readings are supported.
	500	* This is the case if we can read fan speed data,
	501	* and if the returned data is not all zeros.
	502	* Note that the fan alarm is always supported.
	503	*/
	504	ret = pem_read_block(client, PEM_READ_FAN_SPEED,
	505	data->fan_speed,
	506	sizeof(data->fan_speed));
	507	if (!ret && (data->fan_speed[0] \|\| data->fan_speed[1] \|\|
	508	data->fan_speed[2] \|\| data->fan_speed[3])) {
	509	data->fans_supported = true;
82803252	510	data->groups[idx++] = &pem_fan_group;
502b5a01 GR	511	}
502b5a01 GR	512
82803252 AL	513	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
	514	data, data->groups);
	515	return PTR_ERR_OR_ZERO(hwmon_dev);
502b5a01 GR	516	}
	517
	518	static const struct i2c_device_id pem_id[] = {
	519	{"lineage_pem", 0},
	520	{}
	521	};
	522	MODULE_DEVICE_TABLE(i2c, pem_id);
	523
	524	static struct i2c_driver pem_driver = {
	525	.driver = {
	526	.name = "lineage_pem",
	527	},
	528	.probe = pem_probe,
502b5a01 GR	529	.id_table = pem_id,
	530	};
	531
f0967eea	532	module_i2c_driver(pem_driver);
502b5a01	533
bb9a80e5	534	MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
502b5a01 GR	535	MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
502b5a01 GR	536	MODULE_LICENSE("GPL");