projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
hwmon: cleanup non-bool "valid" data fields
[linux-2.6-block.git] / drivers / hwmon / gl518sm.c
CommitLineData
74ba9207 1// SPDX-License-Identifier: GPL-2.0-or-later
1da177e4
LT		 2/*
3 * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
6 * Kyosti Malkki <kmalkki@cc.hut.fi>
7 * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
7c81c60f 8 * Jean Delvare <jdelvare@suse.de>
1da177e4 9 *
1da177e4
LT		 10 * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
11 * and advice of Greg Kroah-Hartman.
12 *
13 * Notes about the port:
14 * Release 0x00 of the GL518SM chipset doesn't support reading of in0,
15 * in1 nor in2. The original driver had an ugly workaround to get them
16 * anyway (changing limits and watching alarms trigger and wear off).
17 * We did not keep that part of the original driver in the Linux 2.6
18 * version, since it was making the driver significantly more complex
19 * with no real benefit.
1da177e4
LT		 20 */
21
1da177e4
LT		 22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/slab.h>
25#include <linux/jiffies.h>
26#include <linux/i2c.h>
943b0830 27#include <linux/hwmon.h>
28292e79 28#include <linux/hwmon-sysfs.h>
943b0830 29#include <linux/err.h>
9a61bf63 30#include <linux/mutex.h>
87808be4 31#include <linux/sysfs.h>
1da177e4
LT		 32
33/* Addresses to scan */
25e9c86d 34static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
1da177e4 35
e5e9f44c 36enum chips { gl518sm_r00, gl518sm_r80 };
1da177e4
LT		 37
38/* Many GL518 constants specified below */
39
40/* The GL518 registers */
41#define GL518_REG_CHIP_ID 0x00
42#define GL518_REG_REVISION 0x01
43#define GL518_REG_VENDOR_ID 0x02
44#define GL518_REG_CONF 0x03
45#define GL518_REG_TEMP_IN 0x04
46#define GL518_REG_TEMP_MAX 0x05
47#define GL518_REG_TEMP_HYST 0x06
48#define GL518_REG_FAN_COUNT 0x07
49#define GL518_REG_FAN_LIMIT 0x08
50#define GL518_REG_VIN1_LIMIT 0x09
51#define GL518_REG_VIN2_LIMIT 0x0a
52#define GL518_REG_VIN3_LIMIT 0x0b
53#define GL518_REG_VDD_LIMIT 0x0c
54#define GL518_REG_VIN3 0x0d
55#define GL518_REG_MISC 0x0f
56#define GL518_REG_ALARM 0x10
57#define GL518_REG_MASK 0x11
58#define GL518_REG_INT 0x12
59#define GL518_REG_VIN2 0x13
60#define GL518_REG_VIN1 0x14
61#define GL518_REG_VDD 0x15
62
63
64/*
65 * Conversions. Rounding and limit checking is only done on the TO_REG
66 * variants. Note that you should be a bit careful with which arguments
67 * these macros are called: arguments may be evaluated more than once.
68 * Fixing this is just not worth it.
69 */
70
71#define RAW_FROM_REG(val) val
72
228f8e0c
GR		 73#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
74#define BOOL_TO_REG(val) ((val) ? 0 : 1)
1da177e4 75
f80e868c
GR		 76#define TEMP_CLAMP(val) clamp_val(val, -119000, 136000)
77#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 119)
1da177e4
LT		 78#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
79
80static inline u8 FAN_TO_REG(long rpm, int div)
81{
82 long rpmdiv;
83 if (rpm == 0)
84 return 0;
2a844c14
GR		 85 rpmdiv = clamp_val(rpm, 1, 960000) * div;
86 return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
1da177e4 87}
228f8e0c 88#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
1da177e4 89
f80e868c
GR		 90#define IN_CLAMP(val) clamp_val(val, 0, 255 * 19)
91#define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19)
228f8e0c 92#define IN_FROM_REG(val) ((val) * 19)
1da177e4 93
f80e868c
GR		 94#define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4)
95#define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95)
96#define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4)
1da177e4 97
1da177e4
LT		 98#define DIV_FROM_REG(val) (1 << (val))
99
100#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
101#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
102
103/* Each client has this additional data */
104struct gl518_data {
18faf5b9
AL		 105 struct i2c_client *client;
106 const struct attribute_group *groups[3];
1da177e4
LT		 107 enum chips type;
108
9a61bf63 109 struct mutex update_lock;
952a11ca 110 bool valid; /* true if following fields are valid */
1da177e4
LT		 111 unsigned long last_updated; /* In jiffies */
112
113 u8 voltage_in[4]; /* Register values; [0] = VDD */
114 u8 voltage_min[4]; /* Register values; [0] = VDD */
115 u8 voltage_max[4]; /* Register values; [0] = VDD */
1da177e4
LT		 116 u8 fan_in[2];
117 u8 fan_min[2];
118 u8 fan_div[2]; /* Register encoding, shifted right */
119 u8 fan_auto1; /* Boolean */
120 u8 temp_in; /* Register values */
121 u8 temp_max; /* Register values */
122 u8 temp_hyst; /* Register values */
123 u8 alarms; /* Register value */
a5955ed2 124 u8 alarm_mask;
1da177e4
LT		 125 u8 beep_mask; /* Register value */
126 u8 beep_enable; /* Boolean */
127};
128
d4a972a3
AL		 129/*
130 * Registers 0x07 to 0x0c are word-sized, others are byte-sized
131 * GL518 uses a high-byte first convention, which is exactly opposite to
132 * the SMBus standard.
133 */
134static int gl518_read_value(struct i2c_client *client, u8 reg)
135{
136 if ((reg >= 0x07) && (reg <= 0x0c))
137 return i2c_smbus_read_word_swapped(client, reg);
138 else
139 return i2c_smbus_read_byte_data(client, reg);
140}
1da177e4 141
d4a972a3
AL		 142static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
143{
144 if ((reg >= 0x07) && (reg <= 0x0c))
145 return i2c_smbus_write_word_swapped(client, reg, value);
146 else
147 return i2c_smbus_write_byte_data(client, reg, value);
148}
95d80e7c 149
d4a972a3
AL		 150static struct gl518_data *gl518_update_device(struct device *dev)
151{
18faf5b9
AL		 152 struct gl518_data *data = dev_get_drvdata(dev);
153 struct i2c_client *client = data->client;
d4a972a3
AL		 154 int val;
155
156 mutex_lock(&data->update_lock);
157
158 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
159 || !data->valid) {
160 dev_dbg(&client->dev, "Starting gl518 update\n");
161
162 data->alarms = gl518_read_value(client, GL518_REG_INT);
163 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
164
165 val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
166 data->voltage_min[0] = val & 0xff;
167 data->voltage_max[0] = (val >> 8) & 0xff;
168 val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
169 data->voltage_min[1] = val & 0xff;
170 data->voltage_max[1] = (val >> 8) & 0xff;
171 val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
172 data->voltage_min[2] = val & 0xff;
173 data->voltage_max[2] = (val >> 8) & 0xff;
174 val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
175 data->voltage_min[3] = val & 0xff;
176 data->voltage_max[3] = (val >> 8) & 0xff;
177
178 val = gl518_read_value(client, GL518_REG_FAN_COUNT);
179 data->fan_in[0] = (val >> 8) & 0xff;
180 data->fan_in[1] = val & 0xff;
181
182 val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
183 data->fan_min[0] = (val >> 8) & 0xff;
184 data->fan_min[1] = val & 0xff;
185
186 data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
187 data->temp_max =
188 gl518_read_value(client, GL518_REG_TEMP_MAX);
189 data->temp_hyst =
190 gl518_read_value(client, GL518_REG_TEMP_HYST);
191
192 val = gl518_read_value(client, GL518_REG_MISC);
193 data->fan_div[0] = (val >> 6) & 0x03;
194 data->fan_div[1] = (val >> 4) & 0x03;
195 data->fan_auto1 = (val >> 3) & 0x01;
196
197 data->alarms &= data->alarm_mask;
198
199 val = gl518_read_value(client, GL518_REG_CONF);
200 data->beep_enable = (val >> 2) & 1;
201
202 if (data->type != gl518sm_r00) {
203 data->voltage_in[0] =
204 gl518_read_value(client, GL518_REG_VDD);
205 data->voltage_in[1] =
206 gl518_read_value(client, GL518_REG_VIN1);
207 data->voltage_in[2] =
208 gl518_read_value(client, GL518_REG_VIN2);
209 }
210 data->voltage_in[3] =
211 gl518_read_value(client, GL518_REG_VIN3);
212
213 data->last_updated = jiffies;
952a11ca 214 data->valid = true;
d4a972a3
AL		 215 }
216
217 mutex_unlock(&data->update_lock);
218
219 return data;
220}
1da177e4
LT		 221
222/*
223 * Sysfs stuff
224 */
225
226#define show(type, suffix, value) \
228f8e0c
GR		 227static ssize_t show_##suffix(struct device *dev, \
228 struct device_attribute *attr, char *buf) \
1da177e4
LT		 229{ \
230 struct gl518_data *data = gl518_update_device(dev); \
231 return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
232}
233
1da177e4
LT		 234show(TEMP, temp_input1, temp_in);
235show(TEMP, temp_max1, temp_max);
236show(TEMP, temp_hyst1, temp_hyst);
237show(BOOL, fan_auto1, fan_auto1);
1da177e4
LT		 238show(VDD, in_input0, voltage_in[0]);
239show(IN, in_input1, voltage_in[1]);
240show(IN, in_input2, voltage_in[2]);
241show(IN, in_input3, voltage_in[3]);
242show(VDD, in_min0, voltage_min[0]);
243show(IN, in_min1, voltage_min[1]);
244show(IN, in_min2, voltage_min[2]);
245show(IN, in_min3, voltage_min[3]);
246show(VDD, in_max0, voltage_max[0]);
247show(IN, in_max1, voltage_max[1]);
248show(IN, in_max2, voltage_max[2]);
249show(IN, in_max3, voltage_max[3]);
250show(RAW, alarms, alarms);
251show(BOOL, beep_enable, beep_enable);
252show(BEEP_MASK, beep_mask, beep_mask);
253
8f3bcb36 254static ssize_t fan_input_show(struct device *dev,
28292e79
JD		 255 struct device_attribute *attr, char *buf)
256{
257 int nr = to_sensor_dev_attr(attr)->index;
258 struct gl518_data *data = gl518_update_device(dev);
259 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
260 DIV_FROM_REG(data->fan_div[nr])));
261}
262
8f3bcb36
GR		 263static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
264 char *buf)
28292e79
JD		 265{
266 int nr = to_sensor_dev_attr(attr)->index;
267 struct gl518_data *data = gl518_update_device(dev);
268 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
269 DIV_FROM_REG(data->fan_div[nr])));
270}
271
8f3bcb36
GR		 272static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr,
273 char *buf)
28292e79
JD		 274{
275 int nr = to_sensor_dev_attr(attr)->index;
276 struct gl518_data *data = gl518_update_device(dev);
277 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
278}
279
1da177e4 280#define set(type, suffix, value, reg) \
228f8e0c
GR		 281static ssize_t set_##suffix(struct device *dev, \
282 struct device_attribute *attr, \
283 const char *buf, size_t count) \
1da177e4 284{ \
18faf5b9
AL		 285 struct gl518_data *data = dev_get_drvdata(dev); \
286 struct i2c_client *client = data->client; \
228f8e0c
GR		 287 long val; \
288 int err = kstrtol(buf, 10, &val); \
289 if (err) \
290 return err; \
1da177e4 291 \
9a61bf63 292 mutex_lock(&data->update_lock); \
1da177e4
LT		 293 data->value = type##_TO_REG(val); \
294 gl518_write_value(client, reg, data->value); \
9a61bf63 295 mutex_unlock(&data->update_lock); \
1da177e4
LT		 296 return count; \
297}
298
299#define set_bits(type, suffix, value, reg, mask, shift) \
228f8e0c
GR		 300static ssize_t set_##suffix(struct device *dev, \
301 struct device_attribute *attr, \
302 const char *buf, size_t count) \
1da177e4 303{ \
18faf5b9
AL		 304 struct gl518_data *data = dev_get_drvdata(dev); \
305 struct i2c_client *client = data->client; \
1da177e4 306 int regvalue; \
228f8e0c
GR		 307 unsigned long val; \
308 int err = kstrtoul(buf, 10, &val); \
309 if (err) \
310 return err; \
1da177e4 311 \
9a61bf63 312 mutex_lock(&data->update_lock); \
1da177e4
LT		 313 regvalue = gl518_read_value(client, reg); \
314 data->value = type##_TO_REG(val); \
315 regvalue = (regvalue & ~mask) | (data->value << shift); \
316 gl518_write_value(client, reg, regvalue); \
9a61bf63 317 mutex_unlock(&data->update_lock); \
1da177e4
LT		 318 return count; \
319}
320
321#define set_low(type, suffix, value, reg) \
322 set_bits(type, suffix, value, reg, 0x00ff, 0)
323#define set_high(type, suffix, value, reg) \
324 set_bits(type, suffix, value, reg, 0xff00, 8)
325
326set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
327set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
328set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
1da177e4
LT		 329set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
330set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
331set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
332set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
333set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
334set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
335set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
336set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
337set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
338set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
339
8f3bcb36
GR		 340static ssize_t fan_min_store(struct device *dev,
341 struct device_attribute *attr, const char *buf,
342 size_t count)
1da177e4 343{
18faf5b9
AL		 344 struct gl518_data *data = dev_get_drvdata(dev);
345 struct i2c_client *client = data->client;
28292e79 346 int nr = to_sensor_dev_attr(attr)->index;
1da177e4 347 int regvalue;
228f8e0c
GR		 348 unsigned long val;
349 int err;
350
351 err = kstrtoul(buf, 10, &val);
352 if (err)
353 return err;
1da177e4 354
9a61bf63 355 mutex_lock(&data->update_lock);
1da177e4 356 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
28292e79
JD		 357 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
358 regvalue = (regvalue & (0xff << (8 * nr)))
359 | (data->fan_min[nr] << (8 * (1 - nr)));
1da177e4
LT		 360 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
361
362 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
28292e79
JD		 363 if (data->fan_min[nr] == 0)
364 data->alarm_mask &= ~(0x20 << nr);
1da177e4 365 else
28292e79 366 data->alarm_mask |= (0x20 << nr);
1da177e4
LT		 367 data->beep_mask &= data->alarm_mask;
368 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
369
9a61bf63 370 mutex_unlock(&data->update_lock);
1da177e4
LT		 371 return count;
372}
373
8f3bcb36
GR		 374static ssize_t fan_div_store(struct device *dev,
375 struct device_attribute *attr, const char *buf,
376 size_t count)
1da177e4 377{
18faf5b9
AL		 378 struct gl518_data *data = dev_get_drvdata(dev);
379 struct i2c_client *client = data->client;
28292e79 380 int nr = to_sensor_dev_attr(attr)->index;
1da177e4 381 int regvalue;
228f8e0c
GR		 382 unsigned long val;
383 int err;
384
385 err = kstrtoul(buf, 10, &val);
386 if (err)
387 return err;
1da177e4 388
21df67b1 389 switch (val) {
228f8e0c
GR		 390 case 1:
391 val = 0;
392 break;
393 case 2:
394 val = 1;
395 break;
396 case 4:
397 val = 2;
398 break;
399 case 8:
400 val = 3;
401 break;
21df67b1 402 default:
b55f3757
GR		 403 dev_err(dev,
404 "Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n",
405 val);
21df67b1
JD		 406 return -EINVAL;
407 }
408
9a61bf63 409 mutex_lock(&data->update_lock);
28292e79 410 regvalue = gl518_read_value(client, GL518_REG_MISC);
21df67b1 411 data->fan_div[nr] = val;
28292e79
JD		 412 regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
413 | (data->fan_div[nr] << (6 - 2 * nr));
414 gl518_write_value(client, GL518_REG_MISC, regvalue);
9a61bf63 415 mutex_unlock(&data->update_lock);
1da177e4
LT		 416 return count;
417}
418
8f3bcb36
GR		 419static DEVICE_ATTR(temp1_input, 0444, show_temp_input1, NULL);
420static DEVICE_ATTR(temp1_max, 0644, show_temp_max1, set_temp_max1);
421static DEVICE_ATTR(temp1_max_hyst, 0644,
422 show_temp_hyst1, set_temp_hyst1);
423static DEVICE_ATTR(fan1_auto, 0644, show_fan_auto1, set_fan_auto1);
424static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
425static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
426static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
427static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
428static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
429static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
430static DEVICE_ATTR(in0_input, 0444, show_in_input0, NULL);
431static DEVICE_ATTR(in1_input, 0444, show_in_input1, NULL);
432static DEVICE_ATTR(in2_input, 0444, show_in_input2, NULL);
433static DEVICE_ATTR(in3_input, 0444, show_in_input3, NULL);
434static DEVICE_ATTR(in0_min, 0644, show_in_min0, set_in_min0);
435static DEVICE_ATTR(in1_min, 0644, show_in_min1, set_in_min1);
436static DEVICE_ATTR(in2_min, 0644, show_in_min2, set_in_min2);
437static DEVICE_ATTR(in3_min, 0644, show_in_min3, set_in_min3);
438static DEVICE_ATTR(in0_max, 0644, show_in_max0, set_in_max0);
439static DEVICE_ATTR(in1_max, 0644, show_in_max1, set_in_max1);
440static DEVICE_ATTR(in2_max, 0644, show_in_max2, set_in_max2);
441static DEVICE_ATTR(in3_max, 0644, show_in_max3, set_in_max3);
442static DEVICE_ATTR(alarms, 0444, show_alarms, NULL);
443static DEVICE_ATTR(beep_enable, 0644,
444 show_beep_enable, set_beep_enable);
445static DEVICE_ATTR(beep_mask, 0644,
446 show_beep_mask, set_beep_mask);
447
448static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
da6848da
JD		 449 char *buf)
450{
451 int bitnr = to_sensor_dev_attr(attr)->index;
452 struct gl518_data *data = gl518_update_device(dev);
453 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
454}
455
8f3bcb36
GR		 456static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
457static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
458static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
459static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
460static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
461static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5);
462static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6);
da6848da 463
8f3bcb36
GR		 464static ssize_t beep_show(struct device *dev, struct device_attribute *attr,
465 char *buf)
da6848da
JD		 466{
467 int bitnr = to_sensor_dev_attr(attr)->index;
468 struct gl518_data *data = gl518_update_device(dev);
469 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
470}
471
8f3bcb36
GR		 472static ssize_t beep_store(struct device *dev, struct device_attribute *attr,
473 const char *buf, size_t count)
da6848da 474{
18faf5b9
AL		 475 struct gl518_data *data = dev_get_drvdata(dev);
476 struct i2c_client *client = data->client;
da6848da
JD		 477 int bitnr = to_sensor_dev_attr(attr)->index;
478 unsigned long bit;
228f8e0c
GR		 479 int err;
480
481 err = kstrtoul(buf, 10, &bit);
482 if (err)
483 return err;
da6848da 484
da6848da
JD		 485 if (bit & ~1)
486 return -EINVAL;
487
488 mutex_lock(&data->update_lock);
489 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
490 if (bit)
491 data->beep_mask |= (1 << bitnr);
492 else
493 data->beep_mask &= ~(1 << bitnr);
494 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
495 mutex_unlock(&data->update_lock);
496 return count;
497}
498
8f3bcb36
GR		 499static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0);
500static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1);
501static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2);
502static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3);
503static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4);
504static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5);
505static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6);
da6848da 506
87808be4 507static struct attribute *gl518_attributes[] = {
87808be4
JD		 508 &dev_attr_in3_input.attr,
509 &dev_attr_in0_min.attr,
510 &dev_attr_in1_min.attr,
511 &dev_attr_in2_min.attr,
512 &dev_attr_in3_min.attr,
513 &dev_attr_in0_max.attr,
514 &dev_attr_in1_max.attr,
515 &dev_attr_in2_max.attr,
516 &dev_attr_in3_max.attr,
da6848da
JD		 517 &sensor_dev_attr_in0_alarm.dev_attr.attr,
518 &sensor_dev_attr_in1_alarm.dev_attr.attr,
519 &sensor_dev_attr_in2_alarm.dev_attr.attr,
520 &sensor_dev_attr_in3_alarm.dev_attr.attr,
521 &sensor_dev_attr_in0_beep.dev_attr.attr,
522 &sensor_dev_attr_in1_beep.dev_attr.attr,
523 &sensor_dev_attr_in2_beep.dev_attr.attr,
524 &sensor_dev_attr_in3_beep.dev_attr.attr,
87808be4
JD		 525
526 &dev_attr_fan1_auto.attr,
28292e79
JD		 527 &sensor_dev_attr_fan1_input.dev_attr.attr,
528 &sensor_dev_attr_fan2_input.dev_attr.attr,
529 &sensor_dev_attr_fan1_min.dev_attr.attr,
530 &sensor_dev_attr_fan2_min.dev_attr.attr,
531 &sensor_dev_attr_fan1_div.dev_attr.attr,
532 &sensor_dev_attr_fan2_div.dev_attr.attr,
da6848da
JD		 533 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
534 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
535 &sensor_dev_attr_fan1_beep.dev_attr.attr,
536 &sensor_dev_attr_fan2_beep.dev_attr.attr,
87808be4
JD		 537
538 &dev_attr_temp1_input.attr,
539 &dev_attr_temp1_max.attr,
540 &dev_attr_temp1_max_hyst.attr,
da6848da
JD		 541 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
542 &sensor_dev_attr_temp1_beep.dev_attr.attr,
87808be4
JD		 543
544 &dev_attr_alarms.attr,
545 &dev_attr_beep_enable.attr,
546 &dev_attr_beep_mask.attr,
547 NULL
548};
549
550static const struct attribute_group gl518_group = {
551 .attrs = gl518_attributes,
552};
553
5314f5c1
JD		 554static struct attribute *gl518_attributes_r80[] = {
555 &dev_attr_in0_input.attr,
556 &dev_attr_in1_input.attr,
557 &dev_attr_in2_input.attr,
558 NULL
559};
560
561static const struct attribute_group gl518_group_r80 = {
562 .attrs = gl518_attributes_r80,
563};
564
1da177e4
LT		 565/*
566 * Real code
567 */
568
95d80e7c 569/* Return 0 if detection is successful, -ENODEV otherwise */
310ec792 570static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
1da177e4 571{
95d80e7c 572 struct i2c_adapter *adapter = client->adapter;
52df6440 573 int rev;
1da177e4
LT		 574
575 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
576 I2C_FUNC_SMBUS_WORD_DATA))
95d80e7c 577 return -ENODEV;
1da177e4
LT		 578
579 /* Now, we do the remaining detection. */
52df6440
JD		 580 if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
581 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
582 return -ENODEV;
1da177e4
LT		 583
584 /* Determine the chip type. */
52df6440
JD		 585 rev = gl518_read_value(client, GL518_REG_REVISION);
586 if (rev != 0x00 && rev != 0x80)
587 return -ENODEV;
1da177e4 588
95d80e7c 589 strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
1da177e4 590
95d80e7c
JD		 591 return 0;
592}
593
d4a972a3
AL		 594/*
595 * Called when we have found a new GL518SM.
596 * Note that we preserve D4:NoFan2 and D2:beep_enable.
597 */
598static void gl518_init_client(struct i2c_client *client)
599{
600 /* Make sure we leave D7:Reset untouched */
601 u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
602
603 /* Comparator mode (D3=0), standby mode (D6=0) */
604 gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
605
606 /* Never interrupts */
607 gl518_write_value(client, GL518_REG_MASK, 0x00);
608
609 /* Clear status register (D5=1), start (D6=1) */
610 gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
611 gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
612}
613
67487038 614static int gl518_probe(struct i2c_client *client)
95d80e7c 615{
18faf5b9
AL		 616 struct device *dev = &client->dev;
617 struct device *hwmon_dev;
95d80e7c 618 struct gl518_data *data;
18faf5b9 619 int revision;
95d80e7c 620
18faf5b9 621 data = devm_kzalloc(dev, sizeof(struct gl518_data), GFP_KERNEL);
bba636d0
GR		 622 if (!data)
623 return -ENOMEM;
95d80e7c 624
18faf5b9 625 data->client = client;
95d80e7c
JD		 626 revision = gl518_read_value(client, GL518_REG_REVISION);
627 data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
628 mutex_init(&data->update_lock);
1da177e4
LT		 629
630 /* Initialize the GL518SM chip */
631 data->alarm_mask = 0xff;
a5955ed2 632 gl518_init_client(client);
1da177e4 633
18faf5b9
AL		 634 /* sysfs hooks */
635 data->groups[0] = &gl518_group;
5314f5c1 636 if (data->type == gl518sm_r80)
18faf5b9 637 data->groups[1] = &gl518_group_r80;
943b0830 638
18faf5b9
AL		 639 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
640 data, data->groups);
641 return PTR_ERR_OR_ZERO(hwmon_dev);
1da177e4
LT		 642}
643
d4a972a3
AL		 644static const struct i2c_device_id gl518_id[] = {
645 { "gl518sm", 0 },
646 { }
647};
648MODULE_DEVICE_TABLE(i2c, gl518_id);
1da177e4 649
d4a972a3
AL		 650static struct i2c_driver gl518_driver = {
651 .class = I2C_CLASS_HWMON,
652 .driver = {
653 .name = "gl518sm",
654 },
67487038 655 .probe_new = gl518_probe,
d4a972a3
AL		 656 .id_table = gl518_id,
657 .detect = gl518_detect,
658 .address_list = normal_i2c,
659};
1da177e4 660
f0967eea 661module_i2c_driver(gl518_driver);
1da177e4
LT		 662
663MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
664 "Kyosti Malkki <kmalkki@cc.hut.fi> and "
665 "Hong-Gunn Chew <hglinux@gunnet.org>");
666MODULE_DESCRIPTION("GL518SM driver");
667MODULE_LICENSE("GPL");
Linux 6.x block layer and io_uring tree(s)