Commit | Line | Data |
---|---|---|
74ba9207 | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
60994698 RS |
2 | /* |
3 | * ds620.c - Support for temperature sensor and thermostat DS620 | |
4 | * | |
5 | * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de> | |
6 | * | |
7 | * based on ds1621.c by Christian W. Zuckschwerdt <zany@triq.net> | |
60994698 RS |
8 | */ |
9 | ||
10 | #include <linux/module.h> | |
11 | #include <linux/init.h> | |
12 | #include <linux/slab.h> | |
13 | #include <linux/jiffies.h> | |
14 | #include <linux/i2c.h> | |
15 | #include <linux/hwmon.h> | |
16 | #include <linux/hwmon-sysfs.h> | |
17 | #include <linux/err.h> | |
18 | #include <linux/mutex.h> | |
19 | #include <linux/sysfs.h> | |
570999f3 | 20 | #include <linux/platform_data/ds620.h> |
60994698 RS |
21 | |
22 | /* | |
23 | * Many DS620 constants specified below | |
24 | * 15 14 13 12 11 10 09 08 | |
25 | * |Done|NVB |THF |TLF |R1 |R0 |AUTOC|1SHOT| | |
26 | * | |
27 | * 07 06 05 04 03 02 01 00 | |
28 | * |PO2 |PO1 |A2 |A1 |A0 | | | | | |
29 | */ | |
30 | #define DS620_REG_CONFIG_DONE 0x8000 | |
31 | #define DS620_REG_CONFIG_NVB 0x4000 | |
32 | #define DS620_REG_CONFIG_THF 0x2000 | |
33 | #define DS620_REG_CONFIG_TLF 0x1000 | |
34 | #define DS620_REG_CONFIG_R1 0x0800 | |
35 | #define DS620_REG_CONFIG_R0 0x0400 | |
36 | #define DS620_REG_CONFIG_AUTOC 0x0200 | |
37 | #define DS620_REG_CONFIG_1SHOT 0x0100 | |
38 | #define DS620_REG_CONFIG_PO2 0x0080 | |
39 | #define DS620_REG_CONFIG_PO1 0x0040 | |
40 | #define DS620_REG_CONFIG_A2 0x0020 | |
41 | #define DS620_REG_CONFIG_A1 0x0010 | |
42 | #define DS620_REG_CONFIG_A0 0x0008 | |
43 | ||
44 | /* The DS620 registers */ | |
45 | static const u8 DS620_REG_TEMP[3] = { | |
46 | 0xAA, /* input, word, RO */ | |
47 | 0xA2, /* min, word, RW */ | |
48 | 0xA0, /* max, word, RW */ | |
49 | }; | |
50 | ||
51 | #define DS620_REG_CONF 0xAC /* word, RW */ | |
52 | #define DS620_COM_START 0x51 /* no data */ | |
53 | #define DS620_COM_STOP 0x22 /* no data */ | |
54 | ||
55 | /* Each client has this additional data */ | |
56 | struct ds620_data { | |
f073b994 | 57 | struct i2c_client *client; |
60994698 RS |
58 | struct mutex update_lock; |
59 | char valid; /* !=0 if following fields are valid */ | |
60 | unsigned long last_updated; /* In jiffies */ | |
61 | ||
cc41d586 | 62 | s16 temp[3]; /* Register values, word */ |
60994698 RS |
63 | }; |
64 | ||
60994698 RS |
65 | static void ds620_init_client(struct i2c_client *client) |
66 | { | |
a8b3a3a5 | 67 | struct ds620_platform_data *ds620_info = dev_get_platdata(&client->dev); |
60994698 RS |
68 | u16 conf, new_conf; |
69 | ||
70 | new_conf = conf = | |
90f4102c | 71 | i2c_smbus_read_word_swapped(client, DS620_REG_CONF); |
60994698 RS |
72 | |
73 | /* switch to continuous conversion mode */ | |
74 | new_conf &= ~DS620_REG_CONFIG_1SHOT; | |
75 | /* already high at power-on, but don't trust the BIOS! */ | |
76 | new_conf |= DS620_REG_CONFIG_PO2; | |
77 | /* thermostat mode according to platform data */ | |
78 | if (ds620_info && ds620_info->pomode == 1) | |
79 | new_conf &= ~DS620_REG_CONFIG_PO1; /* PO_LOW */ | |
80 | else if (ds620_info && ds620_info->pomode == 2) | |
81 | new_conf |= DS620_REG_CONFIG_PO1; /* PO_HIGH */ | |
82 | else | |
83 | new_conf &= ~DS620_REG_CONFIG_PO2; /* always low */ | |
84 | /* with highest precision */ | |
85 | new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0; | |
86 | ||
87 | if (conf != new_conf) | |
90f4102c | 88 | i2c_smbus_write_word_swapped(client, DS620_REG_CONF, new_conf); |
60994698 RS |
89 | |
90 | /* start conversion */ | |
91 | i2c_smbus_write_byte(client, DS620_COM_START); | |
92 | } | |
93 | ||
94 | static struct ds620_data *ds620_update_client(struct device *dev) | |
95 | { | |
f073b994 AL |
96 | struct ds620_data *data = dev_get_drvdata(dev); |
97 | struct i2c_client *client = data->client; | |
60994698 RS |
98 | struct ds620_data *ret = data; |
99 | ||
100 | mutex_lock(&data->update_lock); | |
101 | ||
102 | if (time_after(jiffies, data->last_updated + HZ + HZ / 2) | |
103 | || !data->valid) { | |
104 | int i; | |
105 | int res; | |
106 | ||
107 | dev_dbg(&client->dev, "Starting ds620 update\n"); | |
108 | ||
109 | for (i = 0; i < ARRAY_SIZE(data->temp); i++) { | |
90f4102c JD |
110 | res = i2c_smbus_read_word_swapped(client, |
111 | DS620_REG_TEMP[i]); | |
60994698 RS |
112 | if (res < 0) { |
113 | ret = ERR_PTR(res); | |
114 | goto abort; | |
115 | } | |
116 | ||
117 | data->temp[i] = res; | |
118 | } | |
119 | ||
120 | data->last_updated = jiffies; | |
121 | data->valid = 1; | |
122 | } | |
123 | abort: | |
124 | mutex_unlock(&data->update_lock); | |
125 | ||
126 | return ret; | |
127 | } | |
128 | ||
57549f33 | 129 | static ssize_t temp_show(struct device *dev, struct device_attribute *da, |
60994698 RS |
130 | char *buf) |
131 | { | |
132 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
133 | struct ds620_data *data = ds620_update_client(dev); | |
134 | ||
135 | if (IS_ERR(data)) | |
136 | return PTR_ERR(data); | |
137 | ||
138 | return sprintf(buf, "%d\n", ((data->temp[attr->index] / 8) * 625) / 10); | |
139 | } | |
140 | ||
57549f33 GR |
141 | static ssize_t temp_store(struct device *dev, struct device_attribute *da, |
142 | const char *buf, size_t count) | |
60994698 RS |
143 | { |
144 | int res; | |
145 | long val; | |
146 | ||
147 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
f073b994 AL |
148 | struct ds620_data *data = dev_get_drvdata(dev); |
149 | struct i2c_client *client = data->client; | |
60994698 | 150 | |
179c4fdb | 151 | res = kstrtol(buf, 10, &val); |
60994698 RS |
152 | |
153 | if (res) | |
154 | return res; | |
155 | ||
e36ce99e | 156 | val = (clamp_val(val, -128000, 128000) * 10 / 625) * 8; |
60994698 RS |
157 | |
158 | mutex_lock(&data->update_lock); | |
159 | data->temp[attr->index] = val; | |
90f4102c JD |
160 | i2c_smbus_write_word_swapped(client, DS620_REG_TEMP[attr->index], |
161 | data->temp[attr->index]); | |
60994698 RS |
162 | mutex_unlock(&data->update_lock); |
163 | return count; | |
164 | } | |
165 | ||
57549f33 | 166 | static ssize_t alarm_show(struct device *dev, struct device_attribute *da, |
60994698 RS |
167 | char *buf) |
168 | { | |
169 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); | |
170 | struct ds620_data *data = ds620_update_client(dev); | |
f073b994 | 171 | struct i2c_client *client; |
60994698 RS |
172 | u16 conf, new_conf; |
173 | int res; | |
174 | ||
175 | if (IS_ERR(data)) | |
176 | return PTR_ERR(data); | |
177 | ||
f073b994 AL |
178 | client = data->client; |
179 | ||
60994698 | 180 | /* reset alarms if necessary */ |
90f4102c | 181 | res = i2c_smbus_read_word_swapped(client, DS620_REG_CONF); |
60994698 RS |
182 | if (res < 0) |
183 | return res; | |
184 | ||
90f4102c | 185 | new_conf = conf = res; |
60994698 RS |
186 | new_conf &= ~attr->index; |
187 | if (conf != new_conf) { | |
90f4102c JD |
188 | res = i2c_smbus_write_word_swapped(client, DS620_REG_CONF, |
189 | new_conf); | |
60994698 RS |
190 | if (res < 0) |
191 | return res; | |
192 | } | |
193 | ||
194 | return sprintf(buf, "%d\n", !!(conf & attr->index)); | |
195 | } | |
196 | ||
57549f33 GR |
197 | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); |
198 | static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, 1); | |
199 | static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 2); | |
200 | static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, DS620_REG_CONFIG_TLF); | |
201 | static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, DS620_REG_CONFIG_THF); | |
60994698 | 202 | |
f073b994 | 203 | static struct attribute *ds620_attrs[] = { |
60994698 RS |
204 | &sensor_dev_attr_temp1_input.dev_attr.attr, |
205 | &sensor_dev_attr_temp1_min.dev_attr.attr, | |
206 | &sensor_dev_attr_temp1_max.dev_attr.attr, | |
207 | &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | |
208 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | |
209 | NULL | |
210 | }; | |
211 | ||
f073b994 | 212 | ATTRIBUTE_GROUPS(ds620); |
60994698 | 213 | |
67487038 | 214 | static int ds620_probe(struct i2c_client *client) |
60994698 | 215 | { |
f073b994 AL |
216 | struct device *dev = &client->dev; |
217 | struct device *hwmon_dev; | |
60994698 | 218 | struct ds620_data *data; |
60994698 | 219 | |
f073b994 | 220 | data = devm_kzalloc(dev, sizeof(struct ds620_data), GFP_KERNEL); |
3aa9d1df GR |
221 | if (!data) |
222 | return -ENOMEM; | |
60994698 | 223 | |
f073b994 | 224 | data->client = client; |
60994698 RS |
225 | mutex_init(&data->update_lock); |
226 | ||
227 | /* Initialize the DS620 chip */ | |
228 | ds620_init_client(client); | |
229 | ||
f073b994 AL |
230 | hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
231 | data, ds620_groups); | |
232 | return PTR_ERR_OR_ZERO(hwmon_dev); | |
60994698 RS |
233 | } |
234 | ||
235 | static const struct i2c_device_id ds620_id[] = { | |
236 | {"ds620", 0}, | |
237 | {} | |
238 | }; | |
239 | ||
240 | MODULE_DEVICE_TABLE(i2c, ds620_id); | |
241 | ||
242 | /* This is the driver that will be inserted */ | |
243 | static struct i2c_driver ds620_driver = { | |
244 | .class = I2C_CLASS_HWMON, | |
245 | .driver = { | |
246 | .name = "ds620", | |
247 | }, | |
67487038 | 248 | .probe_new = ds620_probe, |
60994698 RS |
249 | .id_table = ds620_id, |
250 | }; | |
251 | ||
f0967eea | 252 | module_i2c_driver(ds620_driver); |
60994698 RS |
253 | |
254 | MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); | |
255 | MODULE_DESCRIPTION("DS620 driver"); | |
256 | MODULE_LICENSE("GPL"); |