Commit | Line | Data |
---|---|---|
f2b84bbc HG |
1 | /* |
2 | abituguru.c Copyright (c) 2005-2006 Hans de Goede <j.w.r.degoede@hhs.nl> | |
3 | ||
4 | This program is free software; you can redistribute it and/or modify | |
5 | it under the terms of the GNU General Public License as published by | |
6 | the Free Software Foundation; either version 2 of the License, or | |
7 | (at your option) any later version. | |
8 | ||
9 | This program is distributed in the hope that it will be useful, | |
10 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | GNU General Public License for more details. | |
13 | ||
14 | You should have received a copy of the GNU General Public License | |
15 | along with this program; if not, write to the Free Software | |
16 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | /* | |
19 | This driver supports the sensor part of the custom Abit uGuru chip found | |
20 | on Abit uGuru motherboards. Note: because of lack of specs the CPU / RAM / | |
21 | etc voltage & frequency control is not supported! | |
22 | */ | |
23 | #include <linux/module.h> | |
24 | #include <linux/init.h> | |
25 | #include <linux/slab.h> | |
26 | #include <linux/jiffies.h> | |
27 | #include <linux/mutex.h> | |
28 | #include <linux/err.h> | |
29 | #include <linux/platform_device.h> | |
30 | #include <linux/hwmon.h> | |
31 | #include <linux/hwmon-sysfs.h> | |
32 | #include <asm/io.h> | |
33 | ||
34 | /* Banks */ | |
35 | #define ABIT_UGURU_ALARM_BANK 0x20 /* 1x 3 bytes */ | |
36 | #define ABIT_UGURU_SENSOR_BANK1 0x21 /* 16x volt and temp */ | |
37 | #define ABIT_UGURU_FAN_PWM 0x24 /* 3x 5 bytes */ | |
38 | #define ABIT_UGURU_SENSOR_BANK2 0x26 /* fans */ | |
a2392e0b HG |
39 | /* max nr of sensors in bank1, a bank1 sensor can be in, temp or nc */ |
40 | #define ABIT_UGURU_MAX_BANK1_SENSORS 16 | |
41 | /* Warning if you increase one of the 2 MAX defines below to 10 or higher you | |
42 | should adjust the belonging _NAMES_LENGTH macro for the 2 digit number! */ | |
f2b84bbc HG |
43 | /* max nr of sensors in bank2, currently mb's with max 6 fans are known */ |
44 | #define ABIT_UGURU_MAX_BANK2_SENSORS 6 | |
45 | /* max nr of pwm outputs, currently mb's with max 5 pwm outputs are known */ | |
46 | #define ABIT_UGURU_MAX_PWMS 5 | |
47 | /* uGuru sensor bank 1 flags */ /* Alarm if: */ | |
48 | #define ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE 0x01 /* temp over warn */ | |
49 | #define ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE 0x02 /* volt over max */ | |
50 | #define ABIT_UGURU_VOLT_LOW_ALARM_ENABLE 0x04 /* volt under min */ | |
51 | #define ABIT_UGURU_TEMP_HIGH_ALARM_FLAG 0x10 /* temp is over warn */ | |
52 | #define ABIT_UGURU_VOLT_HIGH_ALARM_FLAG 0x20 /* volt is over max */ | |
53 | #define ABIT_UGURU_VOLT_LOW_ALARM_FLAG 0x40 /* volt is under min */ | |
54 | /* uGuru sensor bank 2 flags */ /* Alarm if: */ | |
55 | #define ABIT_UGURU_FAN_LOW_ALARM_ENABLE 0x01 /* fan under min */ | |
56 | /* uGuru sensor bank common flags */ | |
57 | #define ABIT_UGURU_BEEP_ENABLE 0x08 /* beep if alarm */ | |
58 | #define ABIT_UGURU_SHUTDOWN_ENABLE 0x80 /* shutdown if alarm */ | |
59 | /* uGuru fan PWM (speed control) flags */ | |
60 | #define ABIT_UGURU_FAN_PWM_ENABLE 0x80 /* enable speed control */ | |
61 | /* Values used for conversion */ | |
62 | #define ABIT_UGURU_FAN_MAX 15300 /* RPM */ | |
63 | /* Bank1 sensor types */ | |
64 | #define ABIT_UGURU_IN_SENSOR 0 | |
65 | #define ABIT_UGURU_TEMP_SENSOR 1 | |
66 | #define ABIT_UGURU_NC 2 | |
67 | /* Timeouts / Retries, if these turn out to need a lot of fiddling we could | |
68 | convert them to params. */ | |
69 | /* 250 was determined by trial and error, 200 works most of the time, but not | |
70 | always. I assume this is cpu-speed independent, since the ISA-bus and not | |
71 | the CPU should be the bottleneck. Note that 250 sometimes is still not | |
72 | enough (only reported on AN7 mb) this is handled by a higher layer. */ | |
73 | #define ABIT_UGURU_WAIT_TIMEOUT 250 | |
74 | /* Normally all expected status in abituguru_ready, are reported after the | |
75 | first read, but sometimes not and we need to poll, 5 polls was not enough | |
76 | 50 sofar is. */ | |
77 | #define ABIT_UGURU_READY_TIMEOUT 50 | |
78 | /* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */ | |
79 | #define ABIT_UGURU_MAX_RETRIES 3 | |
80 | #define ABIT_UGURU_RETRY_DELAY (HZ/5) | |
a2392e0b | 81 | /* Maximum 2 timeouts in abituguru_update_device, iow 3 in a row is an error */ |
f2b84bbc | 82 | #define ABIT_UGURU_MAX_TIMEOUTS 2 |
a2392e0b HG |
83 | /* utility macros */ |
84 | #define ABIT_UGURU_NAME "abituguru" | |
85 | #define ABIT_UGURU_DEBUG(level, format, arg...) \ | |
86 | if (level <= verbose) \ | |
87 | printk(KERN_DEBUG ABIT_UGURU_NAME ": " format , ## arg) | |
88 | /* Macros to help calculate the sysfs_names array length */ | |
89 | /* sum of strlen of: in??_input\0, in??_{min,max}\0, in??_{min,max}_alarm\0, | |
90 | in??_{min,max}_alarm_enable\0, in??_beep\0, in??_shutdown\0 */ | |
91 | #define ABITUGURU_IN_NAMES_LENGTH (11 + 2 * 9 + 2 * 15 + 2 * 22 + 10 + 14) | |
92 | /* sum of strlen of: temp??_input\0, temp??_max\0, temp??_crit\0, | |
93 | temp??_alarm\0, temp??_alarm_enable\0, temp??_beep\0, temp??_shutdown\0 */ | |
94 | #define ABITUGURU_TEMP_NAMES_LENGTH (13 + 11 + 12 + 13 + 20 + 12 + 16) | |
95 | /* sum of strlen of: fan?_input\0, fan?_min\0, fan?_alarm\0, | |
96 | fan?_alarm_enable\0, fan?_beep\0, fan?_shutdown\0 */ | |
97 | #define ABITUGURU_FAN_NAMES_LENGTH (11 + 9 + 11 + 18 + 10 + 14) | |
98 | /* sum of strlen of: pwm?_enable\0, pwm?_auto_channels_temp\0, | |
99 | pwm?_auto_point{1,2}_pwm\0, pwm?_auto_point{1,2}_temp\0 */ | |
100 | #define ABITUGURU_PWM_NAMES_LENGTH (12 + 24 + 2 * 21 + 2 * 22) | |
101 | /* IN_NAMES_LENGTH > TEMP_NAMES_LENGTH so assume all bank1 sensors are in */ | |
102 | #define ABITUGURU_SYSFS_NAMES_LENGTH ( \ | |
103 | ABIT_UGURU_MAX_BANK1_SENSORS * ABITUGURU_IN_NAMES_LENGTH + \ | |
104 | ABIT_UGURU_MAX_BANK2_SENSORS * ABITUGURU_FAN_NAMES_LENGTH + \ | |
105 | ABIT_UGURU_MAX_PWMS * ABITUGURU_PWM_NAMES_LENGTH) | |
106 | ||
107 | /* All the macros below are named identical to the oguru and oguru2 programs | |
f2b84bbc HG |
108 | reverse engineered by Olle Sandberg, hence the names might not be 100% |
109 | logical. I could come up with better names, but I prefer keeping the names | |
110 | identical so that this driver can be compared with his work more easily. */ | |
111 | /* Two i/o-ports are used by uGuru */ | |
112 | #define ABIT_UGURU_BASE 0x00E0 | |
113 | /* Used to tell uGuru what to read and to read the actual data */ | |
114 | #define ABIT_UGURU_CMD 0x00 | |
115 | /* Mostly used to check if uGuru is busy */ | |
116 | #define ABIT_UGURU_DATA 0x04 | |
117 | #define ABIT_UGURU_REGION_LENGTH 5 | |
118 | /* uGuru status' */ | |
119 | #define ABIT_UGURU_STATUS_WRITE 0x00 /* Ready to be written */ | |
120 | #define ABIT_UGURU_STATUS_READ 0x01 /* Ready to be read */ | |
121 | #define ABIT_UGURU_STATUS_INPUT 0x08 /* More input */ | |
122 | #define ABIT_UGURU_STATUS_READY 0x09 /* Ready to be written */ | |
f2b84bbc HG |
123 | |
124 | /* Constants */ | |
125 | /* in (Volt) sensors go up to 3494 mV, temp to 255000 millidegrees Celsius */ | |
126 | static const int abituguru_bank1_max_value[2] = { 3494, 255000 }; | |
127 | /* Min / Max allowed values for sensor2 (fan) alarm threshold, these values | |
128 | correspond to 300-3000 RPM */ | |
129 | static const u8 abituguru_bank2_min_threshold = 5; | |
130 | static const u8 abituguru_bank2_max_threshold = 50; | |
131 | /* Register 0 is a bitfield, 1 and 2 are pwm settings (255 = 100%), 3 and 4 | |
132 | are temperature trip points. */ | |
133 | static const int abituguru_pwm_settings_multiplier[5] = { 0, 1, 1, 1000, 1000 }; | |
134 | /* Min / Max allowed values for pwm_settings. Note: pwm1 (CPU fan) is a | |
135 | special case the minium allowed pwm% setting for this is 30% (77) on | |
136 | some MB's this special case is handled in the code! */ | |
137 | static const u8 abituguru_pwm_min[5] = { 0, 170, 170, 25, 25 }; | |
138 | static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 }; | |
139 | ||
140 | ||
141 | /* Insmod parameters */ | |
142 | static int force; | |
143 | module_param(force, bool, 0); | |
144 | MODULE_PARM_DESC(force, "Set to one to force detection."); | |
145 | static int fan_sensors; | |
146 | module_param(fan_sensors, int, 0); | |
147 | MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru " | |
148 | "(0 = autodetect)"); | |
149 | static int pwms; | |
150 | module_param(pwms, int, 0); | |
151 | MODULE_PARM_DESC(pwms, "Number of PWMs on the uGuru " | |
152 | "(0 = autodetect)"); | |
153 | ||
154 | /* Default verbose is 2, since this driver is still in the testing phase */ | |
155 | static int verbose = 2; | |
156 | module_param(verbose, int, 0644); | |
157 | MODULE_PARM_DESC(verbose, "How verbose should the driver be? (0-3):\n" | |
158 | " 0 normal output\n" | |
159 | " 1 + verbose error reporting\n" | |
160 | " 2 + sensors type probing info\n" | |
161 | " 3 + retryable error reporting"); | |
162 | ||
163 | ||
164 | /* For the Abit uGuru, we need to keep some data in memory. | |
165 | The structure is dynamically allocated, at the same time when a new | |
166 | abituguru device is allocated. */ | |
167 | struct abituguru_data { | |
168 | struct class_device *class_dev; /* hwmon registered device */ | |
169 | struct mutex update_lock; /* protect access to data and uGuru */ | |
170 | unsigned long last_updated; /* In jiffies */ | |
171 | unsigned short addr; /* uguru base address */ | |
172 | char uguru_ready; /* is the uguru in ready state? */ | |
173 | unsigned char update_timeouts; /* number of update timeouts since last | |
174 | successful update */ | |
175 | ||
176 | /* The sysfs attr and their names are generated automatically, for bank1 | |
177 | we cannot use a predefined array because we don't know beforehand | |
178 | of a sensor is a volt or a temp sensor, for bank2 and the pwms its | |
179 | easier todo things the same way. For in sensors we have 9 (temp 7) | |
180 | sysfs entries per sensor, for bank2 and pwms 6. */ | |
a2392e0b HG |
181 | struct sensor_device_attribute_2 sysfs_attr[ |
182 | ABIT_UGURU_MAX_BANK1_SENSORS * 9 + | |
f2b84bbc | 183 | ABIT_UGURU_MAX_BANK2_SENSORS * 6 + ABIT_UGURU_MAX_PWMS * 6]; |
a2392e0b HG |
184 | /* Buffer to store the dynamically generated sysfs names */ |
185 | char sysfs_names[ABITUGURU_SYSFS_NAMES_LENGTH]; | |
f2b84bbc HG |
186 | |
187 | /* Bank 1 data */ | |
a2392e0b HG |
188 | /* number of and addresses of [0] in, [1] temp sensors */ |
189 | u8 bank1_sensors[2]; | |
190 | u8 bank1_address[2][ABIT_UGURU_MAX_BANK1_SENSORS]; | |
191 | u8 bank1_value[ABIT_UGURU_MAX_BANK1_SENSORS]; | |
192 | /* This array holds 3 entries per sensor for the bank 1 sensor settings | |
f2b84bbc | 193 | (flags, min, max for voltage / flags, warn, shutdown for temp). */ |
a2392e0b | 194 | u8 bank1_settings[ABIT_UGURU_MAX_BANK1_SENSORS][3]; |
f2b84bbc HG |
195 | /* Maximum value for each sensor used for scaling in mV/millidegrees |
196 | Celsius. */ | |
a2392e0b | 197 | int bank1_max_value[ABIT_UGURU_MAX_BANK1_SENSORS]; |
f2b84bbc HG |
198 | |
199 | /* Bank 2 data, ABIT_UGURU_MAX_BANK2_SENSORS entries for bank2 */ | |
200 | u8 bank2_sensors; /* actual number of bank2 sensors found */ | |
201 | u8 bank2_value[ABIT_UGURU_MAX_BANK2_SENSORS]; | |
202 | u8 bank2_settings[ABIT_UGURU_MAX_BANK2_SENSORS][2]; /* flags, min */ | |
203 | ||
204 | /* Alarms 2 bytes for bank1, 1 byte for bank2 */ | |
205 | u8 alarms[3]; | |
206 | ||
207 | /* Fan PWM (speed control) 5 bytes per PWM */ | |
208 | u8 pwms; /* actual number of pwms found */ | |
209 | u8 pwm_settings[ABIT_UGURU_MAX_PWMS][5]; | |
210 | }; | |
211 | ||
212 | /* wait till the uguru is in the specified state */ | |
213 | static int abituguru_wait(struct abituguru_data *data, u8 state) | |
214 | { | |
215 | int timeout = ABIT_UGURU_WAIT_TIMEOUT; | |
216 | ||
217 | while (inb_p(data->addr + ABIT_UGURU_DATA) != state) { | |
218 | timeout--; | |
219 | if (timeout == 0) | |
220 | return -EBUSY; | |
221 | } | |
222 | return 0; | |
223 | } | |
224 | ||
225 | /* Put the uguru in ready for input state */ | |
226 | static int abituguru_ready(struct abituguru_data *data) | |
227 | { | |
228 | int timeout = ABIT_UGURU_READY_TIMEOUT; | |
229 | ||
230 | if (data->uguru_ready) | |
231 | return 0; | |
232 | ||
233 | /* Reset? / Prepare for next read/write cycle */ | |
234 | outb(0x00, data->addr + ABIT_UGURU_DATA); | |
235 | ||
236 | /* Wait till the uguru is ready */ | |
237 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READY)) { | |
238 | ABIT_UGURU_DEBUG(1, | |
239 | "timeout exceeded waiting for ready state\n"); | |
240 | return -EIO; | |
241 | } | |
242 | ||
243 | /* Cmd port MUST be read now and should contain 0xAC */ | |
244 | while (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { | |
245 | timeout--; | |
246 | if (timeout == 0) { | |
247 | ABIT_UGURU_DEBUG(1, | |
248 | "CMD reg does not hold 0xAC after ready command\n"); | |
249 | return -EIO; | |
250 | } | |
251 | } | |
252 | ||
253 | /* After this the ABIT_UGURU_DATA port should contain | |
254 | ABIT_UGURU_STATUS_INPUT */ | |
255 | timeout = ABIT_UGURU_READY_TIMEOUT; | |
256 | while (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT) { | |
257 | timeout--; | |
258 | if (timeout == 0) { | |
259 | ABIT_UGURU_DEBUG(1, | |
260 | "state != more input after ready command\n"); | |
261 | return -EIO; | |
262 | } | |
263 | } | |
264 | ||
265 | data->uguru_ready = 1; | |
266 | return 0; | |
267 | } | |
268 | ||
269 | /* Send the bank and then sensor address to the uGuru for the next read/write | |
270 | cycle. This function gets called as the first part of a read/write by | |
271 | abituguru_read and abituguru_write. This function should never be | |
272 | called by any other function. */ | |
273 | static int abituguru_send_address(struct abituguru_data *data, | |
274 | u8 bank_addr, u8 sensor_addr, int retries) | |
275 | { | |
276 | /* assume the caller does error handling itself if it has not requested | |
277 | any retries, and thus be quiet. */ | |
278 | int report_errors = retries; | |
279 | ||
280 | for (;;) { | |
281 | /* Make sure the uguru is ready and then send the bank address, | |
282 | after this the uguru is no longer "ready". */ | |
283 | if (abituguru_ready(data) != 0) | |
284 | return -EIO; | |
285 | outb(bank_addr, data->addr + ABIT_UGURU_DATA); | |
286 | data->uguru_ready = 0; | |
287 | ||
288 | /* Wait till the uguru is ABIT_UGURU_STATUS_INPUT state again | |
289 | and send the sensor addr */ | |
290 | if (abituguru_wait(data, ABIT_UGURU_STATUS_INPUT)) { | |
291 | if (retries) { | |
292 | ABIT_UGURU_DEBUG(3, "timeout exceeded " | |
293 | "waiting for more input state, %d " | |
294 | "tries remaining\n", retries); | |
295 | set_current_state(TASK_UNINTERRUPTIBLE); | |
296 | schedule_timeout(ABIT_UGURU_RETRY_DELAY); | |
297 | retries--; | |
298 | continue; | |
299 | } | |
300 | if (report_errors) | |
301 | ABIT_UGURU_DEBUG(1, "timeout exceeded " | |
302 | "waiting for more input state " | |
303 | "(bank: %d)\n", (int)bank_addr); | |
304 | return -EBUSY; | |
305 | } | |
306 | outb(sensor_addr, data->addr + ABIT_UGURU_CMD); | |
307 | return 0; | |
308 | } | |
309 | } | |
310 | ||
311 | /* Read count bytes from sensor sensor_addr in bank bank_addr and store the | |
312 | result in buf, retry the send address part of the read retries times. */ | |
313 | static int abituguru_read(struct abituguru_data *data, | |
314 | u8 bank_addr, u8 sensor_addr, u8 *buf, int count, int retries) | |
315 | { | |
316 | int i; | |
317 | ||
318 | /* Send the address */ | |
319 | i = abituguru_send_address(data, bank_addr, sensor_addr, retries); | |
320 | if (i) | |
321 | return i; | |
322 | ||
323 | /* And read the data */ | |
324 | for (i = 0; i < count; i++) { | |
325 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { | |
326 | ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for " | |
327 | "read state (bank: %d, sensor: %d)\n", | |
328 | (int)bank_addr, (int)sensor_addr); | |
329 | break; | |
330 | } | |
331 | buf[i] = inb(data->addr + ABIT_UGURU_CMD); | |
332 | } | |
333 | ||
334 | /* Last put the chip back in ready state */ | |
335 | abituguru_ready(data); | |
336 | ||
337 | return i; | |
338 | } | |
339 | ||
340 | /* Write count bytes from buf to sensor sensor_addr in bank bank_addr, the send | |
341 | address part of the write is always retried ABIT_UGURU_MAX_RETRIES times. */ | |
342 | static int abituguru_write(struct abituguru_data *data, | |
343 | u8 bank_addr, u8 sensor_addr, u8 *buf, int count) | |
344 | { | |
345 | int i; | |
346 | ||
347 | /* Send the address */ | |
348 | i = abituguru_send_address(data, bank_addr, sensor_addr, | |
349 | ABIT_UGURU_MAX_RETRIES); | |
350 | if (i) | |
351 | return i; | |
352 | ||
353 | /* And write the data */ | |
354 | for (i = 0; i < count; i++) { | |
355 | if (abituguru_wait(data, ABIT_UGURU_STATUS_WRITE)) { | |
356 | ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for " | |
357 | "write state (bank: %d, sensor: %d)\n", | |
358 | (int)bank_addr, (int)sensor_addr); | |
359 | break; | |
360 | } | |
361 | outb(buf[i], data->addr + ABIT_UGURU_CMD); | |
362 | } | |
363 | ||
364 | /* Now we need to wait till the chip is ready to be read again, | |
365 | don't ask why */ | |
366 | if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) { | |
367 | ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state " | |
368 | "after write (bank: %d, sensor: %d)\n", (int)bank_addr, | |
369 | (int)sensor_addr); | |
370 | return -EIO; | |
371 | } | |
372 | ||
373 | /* Cmd port MUST be read now and should contain 0xAC */ | |
374 | if (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) { | |
375 | ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after write " | |
376 | "(bank: %d, sensor: %d)\n", (int)bank_addr, | |
377 | (int)sensor_addr); | |
378 | return -EIO; | |
379 | } | |
380 | ||
381 | /* Last put the chip back in ready state */ | |
382 | abituguru_ready(data); | |
383 | ||
384 | return i; | |
385 | } | |
386 | ||
387 | /* Detect sensor type. Temp and Volt sensors are enabled with | |
388 | different masks and will ignore enable masks not meant for them. | |
389 | This enables us to test what kind of sensor we're dealing with. | |
390 | By setting the alarm thresholds so that we will always get an | |
391 | alarm for sensor type X and then enabling the sensor as sensor type | |
392 | X, if we then get an alarm it is a sensor of type X. */ | |
393 | static int __devinit | |
394 | abituguru_detect_bank1_sensor_type(struct abituguru_data *data, | |
395 | u8 sensor_addr) | |
396 | { | |
397 | u8 val, buf[3]; | |
398 | int ret = ABIT_UGURU_NC; | |
399 | ||
400 | /* First read the sensor and the current settings */ | |
401 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val, | |
402 | 1, ABIT_UGURU_MAX_RETRIES) != 1) | |
a2392e0b | 403 | return -ENODEV; |
f2b84bbc HG |
404 | |
405 | /* Test val is sane / usable for sensor type detection. */ | |
406 | if ((val < 10u) || (val > 240u)) { | |
407 | printk(KERN_WARNING ABIT_UGURU_NAME | |
408 | ": bank1-sensor: %d reading (%d) too close to limits, " | |
409 | "unable to determine sensor type, skipping sensor\n", | |
410 | (int)sensor_addr, (int)val); | |
411 | /* assume no sensor is there for sensors for which we can't | |
412 | determine the sensor type because their reading is too close | |
413 | to their limits, this usually means no sensor is there. */ | |
414 | return ABIT_UGURU_NC; | |
415 | } | |
416 | ||
417 | ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr); | |
418 | /* Volt sensor test, enable volt low alarm, set min value ridicously | |
419 | high. If its a volt sensor this should always give us an alarm. */ | |
420 | buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE; | |
421 | buf[1] = 245; | |
422 | buf[2] = 250; | |
423 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, | |
424 | buf, 3) != 3) | |
a2392e0b | 425 | return -ENODEV; |
f2b84bbc HG |
426 | /* Now we need 20 ms to give the uguru time to read the sensors |
427 | and raise a voltage alarm */ | |
428 | set_current_state(TASK_UNINTERRUPTIBLE); | |
429 | schedule_timeout(HZ/50); | |
430 | /* Check for alarm and check the alarm is a volt low alarm. */ | |
431 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, | |
432 | ABIT_UGURU_MAX_RETRIES) != 3) | |
a2392e0b | 433 | return -ENODEV; |
f2b84bbc HG |
434 | if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { |
435 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, | |
436 | sensor_addr, buf, 3, | |
437 | ABIT_UGURU_MAX_RETRIES) != 3) | |
a2392e0b | 438 | return -ENODEV; |
f2b84bbc HG |
439 | if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) { |
440 | /* Restore original settings */ | |
441 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, | |
442 | sensor_addr, | |
443 | data->bank1_settings[sensor_addr], | |
444 | 3) != 3) | |
a2392e0b | 445 | return -ENODEV; |
f2b84bbc HG |
446 | ABIT_UGURU_DEBUG(2, " found volt sensor\n"); |
447 | return ABIT_UGURU_IN_SENSOR; | |
448 | } else | |
449 | ABIT_UGURU_DEBUG(2, " alarm raised during volt " | |
450 | "sensor test, but volt low flag not set\n"); | |
451 | } else | |
452 | ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor " | |
453 | "test\n"); | |
454 | ||
455 | /* Temp sensor test, enable sensor as a temp sensor, set beep value | |
456 | ridicously low (but not too low, otherwise uguru ignores it). | |
457 | If its a temp sensor this should always give us an alarm. */ | |
458 | buf[0] = ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE; | |
459 | buf[1] = 5; | |
460 | buf[2] = 10; | |
461 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, | |
462 | buf, 3) != 3) | |
a2392e0b | 463 | return -ENODEV; |
f2b84bbc HG |
464 | /* Now we need 50 ms to give the uguru time to read the sensors |
465 | and raise a temp alarm */ | |
466 | set_current_state(TASK_UNINTERRUPTIBLE); | |
467 | schedule_timeout(HZ/20); | |
468 | /* Check for alarm and check the alarm is a temp high alarm. */ | |
469 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3, | |
470 | ABIT_UGURU_MAX_RETRIES) != 3) | |
a2392e0b | 471 | return -ENODEV; |
f2b84bbc HG |
472 | if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) { |
473 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1, | |
474 | sensor_addr, buf, 3, | |
475 | ABIT_UGURU_MAX_RETRIES) != 3) | |
a2392e0b | 476 | return -ENODEV; |
f2b84bbc HG |
477 | if (buf[0] & ABIT_UGURU_TEMP_HIGH_ALARM_FLAG) { |
478 | ret = ABIT_UGURU_TEMP_SENSOR; | |
479 | ABIT_UGURU_DEBUG(2, " found temp sensor\n"); | |
480 | } else | |
481 | ABIT_UGURU_DEBUG(2, " alarm raised during temp " | |
482 | "sensor test, but temp high flag not set\n"); | |
483 | } else | |
484 | ABIT_UGURU_DEBUG(2, " alarm not raised during temp sensor " | |
485 | "test\n"); | |
486 | ||
487 | /* Restore original settings */ | |
488 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr, | |
489 | data->bank1_settings[sensor_addr], 3) != 3) | |
a2392e0b | 490 | return -ENODEV; |
f2b84bbc HG |
491 | |
492 | return ret; | |
493 | } | |
494 | ||
495 | /* These functions try to find out how many sensors there are in bank2 and how | |
496 | many pwms there are. The purpose of this is to make sure that we don't give | |
497 | the user the possibility to change settings for non-existent sensors / pwm. | |
498 | The uGuru will happily read / write whatever memory happens to be after the | |
499 | memory storing the PWM settings when reading/writing to a PWM which is not | |
500 | there. Notice even if we detect a PWM which doesn't exist we normally won't | |
501 | write to it, unless the user tries to change the settings. | |
502 | ||
503 | Although the uGuru allows reading (settings) from non existing bank2 | |
504 | sensors, my version of the uGuru does seem to stop writing to them, the | |
505 | write function above aborts in this case with: | |
506 | "CMD reg does not hold 0xAC after write" | |
507 | ||
508 | Notice these 2 tests are non destructive iow read-only tests, otherwise | |
509 | they would defeat their purpose. Although for the bank2_sensors detection a | |
510 | read/write test would be feasible because of the reaction above, I've | |
511 | however opted to stay on the safe side. */ | |
512 | static void __devinit | |
513 | abituguru_detect_no_bank2_sensors(struct abituguru_data *data) | |
514 | { | |
515 | int i; | |
516 | ||
517 | if (fan_sensors) { | |
518 | data->bank2_sensors = fan_sensors; | |
519 | ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of " | |
520 | "\"fan_sensors\" module param\n", | |
521 | (int)data->bank2_sensors); | |
522 | return; | |
523 | } | |
524 | ||
525 | ABIT_UGURU_DEBUG(2, "detecting number of fan sensors\n"); | |
526 | for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { | |
527 | /* 0x89 are the known used bits: | |
528 | -0x80 enable shutdown | |
529 | -0x08 enable beep | |
530 | -0x01 enable alarm | |
531 | All other bits should be 0, but on some motherboards | |
532 | 0x40 (bit 6) is also high, at least for fan1 */ | |
533 | if ((!i && (data->bank2_settings[i][0] & ~0xC9)) || | |
534 | (i && (data->bank2_settings[i][0] & ~0x89))) { | |
535 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " | |
536 | "to be a fan sensor: settings[0] = %02X\n", | |
537 | i, (unsigned int)data->bank2_settings[i][0]); | |
538 | break; | |
539 | } | |
540 | ||
541 | /* check if the threshold is within the allowed range */ | |
542 | if (data->bank2_settings[i][1] < | |
543 | abituguru_bank2_min_threshold) { | |
544 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " | |
545 | "to be a fan sensor: the threshold (%d) is " | |
546 | "below the minimum (%d)\n", i, | |
547 | (int)data->bank2_settings[i][1], | |
548 | (int)abituguru_bank2_min_threshold); | |
549 | break; | |
550 | } | |
551 | if (data->bank2_settings[i][1] > | |
552 | abituguru_bank2_max_threshold) { | |
553 | ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem " | |
554 | "to be a fan sensor: the threshold (%d) is " | |
555 | "above the maximum (%d)\n", i, | |
556 | (int)data->bank2_settings[i][1], | |
557 | (int)abituguru_bank2_max_threshold); | |
558 | break; | |
559 | } | |
560 | } | |
561 | ||
562 | data->bank2_sensors = i; | |
563 | ABIT_UGURU_DEBUG(2, " found: %d fan sensors\n", | |
564 | (int)data->bank2_sensors); | |
565 | } | |
566 | ||
567 | static void __devinit | |
568 | abituguru_detect_no_pwms(struct abituguru_data *data) | |
569 | { | |
570 | int i, j; | |
571 | ||
572 | if (pwms) { | |
573 | data->pwms = pwms; | |
574 | ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of " | |
575 | "\"pwms\" module param\n", (int)data->pwms); | |
576 | return; | |
577 | } | |
578 | ||
579 | ABIT_UGURU_DEBUG(2, "detecting number of PWM outputs\n"); | |
580 | for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) { | |
581 | /* 0x80 is the enable bit and the low | |
582 | nibble is which temp sensor to use, | |
583 | the other bits should be 0 */ | |
584 | if (data->pwm_settings[i][0] & ~0x8F) { | |
585 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
586 | "to be a pwm channel: settings[0] = %02X\n", | |
587 | i, (unsigned int)data->pwm_settings[i][0]); | |
588 | break; | |
589 | } | |
590 | ||
591 | /* the low nibble must correspond to one of the temp sensors | |
592 | we've found */ | |
593 | for (j = 0; j < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; | |
594 | j++) { | |
595 | if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][j] == | |
596 | (data->pwm_settings[i][0] & 0x0F)) | |
597 | break; | |
598 | } | |
599 | if (j == data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) { | |
600 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
601 | "to be a pwm channel: %d is not a valid temp " | |
602 | "sensor address\n", i, | |
603 | data->pwm_settings[i][0] & 0x0F); | |
604 | break; | |
605 | } | |
606 | ||
607 | /* check if all other settings are within the allowed range */ | |
608 | for (j = 1; j < 5; j++) { | |
609 | u8 min; | |
610 | /* special case pwm1 min pwm% */ | |
611 | if ((i == 0) && ((j == 1) || (j == 2))) | |
612 | min = 77; | |
613 | else | |
614 | min = abituguru_pwm_min[j]; | |
615 | if (data->pwm_settings[i][j] < min) { | |
616 | ABIT_UGURU_DEBUG(2, " pwm channel %d does " | |
617 | "not seem to be a pwm channel: " | |
618 | "setting %d (%d) is below the minimum " | |
619 | "value (%d)\n", i, j, | |
620 | (int)data->pwm_settings[i][j], | |
621 | (int)min); | |
622 | goto abituguru_detect_no_pwms_exit; | |
623 | } | |
624 | if (data->pwm_settings[i][j] > abituguru_pwm_max[j]) { | |
625 | ABIT_UGURU_DEBUG(2, " pwm channel %d does " | |
626 | "not seem to be a pwm channel: " | |
627 | "setting %d (%d) is above the maximum " | |
628 | "value (%d)\n", i, j, | |
629 | (int)data->pwm_settings[i][j], | |
630 | (int)abituguru_pwm_max[j]); | |
631 | goto abituguru_detect_no_pwms_exit; | |
632 | } | |
633 | } | |
634 | ||
635 | /* check that min temp < max temp and min pwm < max pwm */ | |
636 | if (data->pwm_settings[i][1] >= data->pwm_settings[i][2]) { | |
637 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
638 | "to be a pwm channel: min pwm (%d) >= " | |
639 | "max pwm (%d)\n", i, | |
640 | (int)data->pwm_settings[i][1], | |
641 | (int)data->pwm_settings[i][2]); | |
642 | break; | |
643 | } | |
644 | if (data->pwm_settings[i][3] >= data->pwm_settings[i][4]) { | |
645 | ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem " | |
646 | "to be a pwm channel: min temp (%d) >= " | |
647 | "max temp (%d)\n", i, | |
648 | (int)data->pwm_settings[i][3], | |
649 | (int)data->pwm_settings[i][4]); | |
650 | break; | |
651 | } | |
652 | } | |
653 | ||
654 | abituguru_detect_no_pwms_exit: | |
655 | data->pwms = i; | |
656 | ABIT_UGURU_DEBUG(2, " found: %d PWM outputs\n", (int)data->pwms); | |
657 | } | |
658 | ||
659 | /* Following are the sysfs callback functions. These functions expect: | |
660 | sensor_device_attribute_2->index: sensor address/offset in the bank | |
661 | sensor_device_attribute_2->nr: register offset, bitmask or NA. */ | |
662 | static struct abituguru_data *abituguru_update_device(struct device *dev); | |
663 | ||
664 | static ssize_t show_bank1_value(struct device *dev, | |
665 | struct device_attribute *devattr, char *buf) | |
666 | { | |
667 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
668 | struct abituguru_data *data = abituguru_update_device(dev); | |
669 | if (!data) | |
670 | return -EIO; | |
671 | return sprintf(buf, "%d\n", (data->bank1_value[attr->index] * | |
672 | data->bank1_max_value[attr->index] + 128) / 255); | |
673 | } | |
674 | ||
675 | static ssize_t show_bank1_setting(struct device *dev, | |
676 | struct device_attribute *devattr, char *buf) | |
677 | { | |
678 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
679 | struct abituguru_data *data = dev_get_drvdata(dev); | |
680 | return sprintf(buf, "%d\n", | |
681 | (data->bank1_settings[attr->index][attr->nr] * | |
682 | data->bank1_max_value[attr->index] + 128) / 255); | |
683 | } | |
684 | ||
685 | static ssize_t show_bank2_value(struct device *dev, | |
686 | struct device_attribute *devattr, char *buf) | |
687 | { | |
688 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
689 | struct abituguru_data *data = abituguru_update_device(dev); | |
690 | if (!data) | |
691 | return -EIO; | |
692 | return sprintf(buf, "%d\n", (data->bank2_value[attr->index] * | |
693 | ABIT_UGURU_FAN_MAX + 128) / 255); | |
694 | } | |
695 | ||
696 | static ssize_t show_bank2_setting(struct device *dev, | |
697 | struct device_attribute *devattr, char *buf) | |
698 | { | |
699 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
700 | struct abituguru_data *data = dev_get_drvdata(dev); | |
701 | return sprintf(buf, "%d\n", | |
702 | (data->bank2_settings[attr->index][attr->nr] * | |
703 | ABIT_UGURU_FAN_MAX + 128) / 255); | |
704 | } | |
705 | ||
706 | static ssize_t store_bank1_setting(struct device *dev, struct device_attribute | |
707 | *devattr, const char *buf, size_t count) | |
708 | { | |
709 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
710 | struct abituguru_data *data = dev_get_drvdata(dev); | |
711 | u8 val = (simple_strtoul(buf, NULL, 10) * 255 + | |
712 | data->bank1_max_value[attr->index]/2) / | |
713 | data->bank1_max_value[attr->index]; | |
714 | ssize_t ret = count; | |
715 | ||
716 | mutex_lock(&data->update_lock); | |
717 | if (data->bank1_settings[attr->index][attr->nr] != val) { | |
718 | u8 orig_val = data->bank1_settings[attr->index][attr->nr]; | |
719 | data->bank1_settings[attr->index][attr->nr] = val; | |
720 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, | |
721 | attr->index, data->bank1_settings[attr->index], | |
722 | 3) <= attr->nr) { | |
723 | data->bank1_settings[attr->index][attr->nr] = orig_val; | |
724 | ret = -EIO; | |
725 | } | |
726 | } | |
727 | mutex_unlock(&data->update_lock); | |
728 | return ret; | |
729 | } | |
730 | ||
731 | static ssize_t store_bank2_setting(struct device *dev, struct device_attribute | |
732 | *devattr, const char *buf, size_t count) | |
733 | { | |
734 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
735 | struct abituguru_data *data = dev_get_drvdata(dev); | |
736 | u8 val = (simple_strtoul(buf, NULL, 10)*255 + ABIT_UGURU_FAN_MAX/2) / | |
737 | ABIT_UGURU_FAN_MAX; | |
738 | ssize_t ret = count; | |
739 | ||
740 | /* this check can be done before taking the lock */ | |
741 | if ((val < abituguru_bank2_min_threshold) || | |
742 | (val > abituguru_bank2_max_threshold)) | |
743 | return -EINVAL; | |
744 | ||
745 | mutex_lock(&data->update_lock); | |
746 | if (data->bank2_settings[attr->index][attr->nr] != val) { | |
747 | u8 orig_val = data->bank2_settings[attr->index][attr->nr]; | |
748 | data->bank2_settings[attr->index][attr->nr] = val; | |
749 | if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK2 + 2, | |
750 | attr->index, data->bank2_settings[attr->index], | |
751 | 2) <= attr->nr) { | |
752 | data->bank2_settings[attr->index][attr->nr] = orig_val; | |
753 | ret = -EIO; | |
754 | } | |
755 | } | |
756 | mutex_unlock(&data->update_lock); | |
757 | return ret; | |
758 | } | |
759 | ||
760 | static ssize_t show_bank1_alarm(struct device *dev, | |
761 | struct device_attribute *devattr, char *buf) | |
762 | { | |
763 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
764 | struct abituguru_data *data = abituguru_update_device(dev); | |
765 | if (!data) | |
766 | return -EIO; | |
767 | /* See if the alarm bit for this sensor is set, and if the | |
768 | alarm matches the type of alarm we're looking for (for volt | |
769 | it can be either low or high). The type is stored in a few | |
770 | readonly bits in the settings part of the relevant sensor. | |
771 | The bitmask of the type is passed to us in attr->nr. */ | |
772 | if ((data->alarms[attr->index / 8] & (0x01 << (attr->index % 8))) && | |
773 | (data->bank1_settings[attr->index][0] & attr->nr)) | |
774 | return sprintf(buf, "1\n"); | |
775 | else | |
776 | return sprintf(buf, "0\n"); | |
777 | } | |
778 | ||
779 | static ssize_t show_bank2_alarm(struct device *dev, | |
780 | struct device_attribute *devattr, char *buf) | |
781 | { | |
782 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
783 | struct abituguru_data *data = abituguru_update_device(dev); | |
784 | if (!data) | |
785 | return -EIO; | |
786 | if (data->alarms[2] & (0x01 << attr->index)) | |
787 | return sprintf(buf, "1\n"); | |
788 | else | |
789 | return sprintf(buf, "0\n"); | |
790 | } | |
791 | ||
792 | static ssize_t show_bank1_mask(struct device *dev, | |
793 | struct device_attribute *devattr, char *buf) | |
794 | { | |
795 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
796 | struct abituguru_data *data = dev_get_drvdata(dev); | |
797 | if (data->bank1_settings[attr->index][0] & attr->nr) | |
798 | return sprintf(buf, "1\n"); | |
799 | else | |
800 | return sprintf(buf, "0\n"); | |
801 | } | |
802 | ||
803 | static ssize_t show_bank2_mask(struct device *dev, | |
804 | struct device_attribute *devattr, char *buf) | |
805 | { | |
806 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
807 | struct abituguru_data *data = dev_get_drvdata(dev); | |
808 | if (data->bank2_settings[attr->index][0] & attr->nr) | |
809 | return sprintf(buf, "1\n"); | |
810 | else | |
811 | return sprintf(buf, "0\n"); | |
812 | } | |
813 | ||
814 | static ssize_t store_bank1_mask(struct device *dev, | |
815 | struct device_attribute *devattr, const char *buf, size_t count) | |
816 | { | |
817 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
818 | struct abituguru_data *data = dev_get_drvdata(dev); | |
819 | int mask = simple_strtoul(buf, NULL, 10); | |
820 | ssize_t ret = count; | |
821 | u8 orig_val; | |
822 | ||
823 | mutex_lock(&data->update_lock); | |
824 | orig_val = data->bank1_settings[attr->index][0]; | |
825 | ||
826 | if (mask) | |
827 | data->bank1_settings[attr->index][0] |= attr->nr; | |
828 | else | |
829 | data->bank1_settings[attr->index][0] &= ~attr->nr; | |
830 | ||
831 | if ((data->bank1_settings[attr->index][0] != orig_val) && | |
832 | (abituguru_write(data, | |
833 | ABIT_UGURU_SENSOR_BANK1 + 2, attr->index, | |
834 | data->bank1_settings[attr->index], 3) < 1)) { | |
835 | data->bank1_settings[attr->index][0] = orig_val; | |
836 | ret = -EIO; | |
837 | } | |
838 | mutex_unlock(&data->update_lock); | |
839 | return ret; | |
840 | } | |
841 | ||
842 | static ssize_t store_bank2_mask(struct device *dev, | |
843 | struct device_attribute *devattr, const char *buf, size_t count) | |
844 | { | |
845 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
846 | struct abituguru_data *data = dev_get_drvdata(dev); | |
847 | int mask = simple_strtoul(buf, NULL, 10); | |
848 | ssize_t ret = count; | |
849 | u8 orig_val; | |
850 | ||
851 | mutex_lock(&data->update_lock); | |
852 | orig_val = data->bank2_settings[attr->index][0]; | |
853 | ||
854 | if (mask) | |
855 | data->bank2_settings[attr->index][0] |= attr->nr; | |
856 | else | |
857 | data->bank2_settings[attr->index][0] &= ~attr->nr; | |
858 | ||
859 | if ((data->bank2_settings[attr->index][0] != orig_val) && | |
860 | (abituguru_write(data, | |
861 | ABIT_UGURU_SENSOR_BANK2 + 2, attr->index, | |
862 | data->bank2_settings[attr->index], 2) < 1)) { | |
863 | data->bank2_settings[attr->index][0] = orig_val; | |
864 | ret = -EIO; | |
865 | } | |
866 | mutex_unlock(&data->update_lock); | |
867 | return ret; | |
868 | } | |
869 | ||
870 | /* Fan PWM (speed control) */ | |
871 | static ssize_t show_pwm_setting(struct device *dev, | |
872 | struct device_attribute *devattr, char *buf) | |
873 | { | |
874 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
875 | struct abituguru_data *data = dev_get_drvdata(dev); | |
876 | return sprintf(buf, "%d\n", data->pwm_settings[attr->index][attr->nr] * | |
877 | abituguru_pwm_settings_multiplier[attr->nr]); | |
878 | } | |
879 | ||
880 | static ssize_t store_pwm_setting(struct device *dev, struct device_attribute | |
881 | *devattr, const char *buf, size_t count) | |
882 | { | |
883 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
884 | struct abituguru_data *data = dev_get_drvdata(dev); | |
885 | u8 min, val = (simple_strtoul(buf, NULL, 10) + | |
886 | abituguru_pwm_settings_multiplier[attr->nr]/2) / | |
887 | abituguru_pwm_settings_multiplier[attr->nr]; | |
888 | ssize_t ret = count; | |
889 | ||
890 | /* special case pwm1 min pwm% */ | |
891 | if ((attr->index == 0) && ((attr->nr == 1) || (attr->nr == 2))) | |
892 | min = 77; | |
893 | else | |
894 | min = abituguru_pwm_min[attr->nr]; | |
895 | ||
896 | /* this check can be done before taking the lock */ | |
897 | if ((val < min) || (val > abituguru_pwm_max[attr->nr])) | |
898 | return -EINVAL; | |
899 | ||
900 | mutex_lock(&data->update_lock); | |
901 | /* this check needs to be done after taking the lock */ | |
902 | if ((attr->nr & 1) && | |
903 | (val >= data->pwm_settings[attr->index][attr->nr + 1])) | |
904 | ret = -EINVAL; | |
905 | else if (!(attr->nr & 1) && | |
906 | (val <= data->pwm_settings[attr->index][attr->nr - 1])) | |
907 | ret = -EINVAL; | |
908 | else if (data->pwm_settings[attr->index][attr->nr] != val) { | |
909 | u8 orig_val = data->pwm_settings[attr->index][attr->nr]; | |
910 | data->pwm_settings[attr->index][attr->nr] = val; | |
911 | if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
912 | attr->index, data->pwm_settings[attr->index], | |
913 | 5) <= attr->nr) { | |
914 | data->pwm_settings[attr->index][attr->nr] = | |
915 | orig_val; | |
916 | ret = -EIO; | |
917 | } | |
918 | } | |
919 | mutex_unlock(&data->update_lock); | |
920 | return ret; | |
921 | } | |
922 | ||
923 | static ssize_t show_pwm_sensor(struct device *dev, | |
924 | struct device_attribute *devattr, char *buf) | |
925 | { | |
926 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
927 | struct abituguru_data *data = dev_get_drvdata(dev); | |
928 | int i; | |
929 | /* We need to walk to the temp sensor addresses to find what | |
930 | the userspace id of the configured temp sensor is. */ | |
931 | for (i = 0; i < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]; i++) | |
932 | if (data->bank1_address[ABIT_UGURU_TEMP_SENSOR][i] == | |
933 | (data->pwm_settings[attr->index][0] & 0x0F)) | |
934 | return sprintf(buf, "%d\n", i+1); | |
935 | ||
936 | return -ENXIO; | |
937 | } | |
938 | ||
939 | static ssize_t store_pwm_sensor(struct device *dev, struct device_attribute | |
940 | *devattr, const char *buf, size_t count) | |
941 | { | |
942 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
943 | struct abituguru_data *data = dev_get_drvdata(dev); | |
944 | unsigned long val = simple_strtoul(buf, NULL, 10) - 1; | |
945 | ssize_t ret = count; | |
946 | ||
947 | mutex_lock(&data->update_lock); | |
948 | if (val < data->bank1_sensors[ABIT_UGURU_TEMP_SENSOR]) { | |
949 | u8 orig_val = data->pwm_settings[attr->index][0]; | |
950 | u8 address = data->bank1_address[ABIT_UGURU_TEMP_SENSOR][val]; | |
951 | data->pwm_settings[attr->index][0] &= 0xF0; | |
952 | data->pwm_settings[attr->index][0] |= address; | |
953 | if (data->pwm_settings[attr->index][0] != orig_val) { | |
954 | if (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
955 | attr->index, | |
956 | data->pwm_settings[attr->index], | |
957 | 5) < 1) { | |
958 | data->pwm_settings[attr->index][0] = orig_val; | |
959 | ret = -EIO; | |
960 | } | |
961 | } | |
962 | } | |
963 | else | |
964 | ret = -EINVAL; | |
965 | mutex_unlock(&data->update_lock); | |
966 | return ret; | |
967 | } | |
968 | ||
969 | static ssize_t show_pwm_enable(struct device *dev, | |
970 | struct device_attribute *devattr, char *buf) | |
971 | { | |
972 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
973 | struct abituguru_data *data = dev_get_drvdata(dev); | |
974 | int res = 0; | |
975 | if (data->pwm_settings[attr->index][0] & ABIT_UGURU_FAN_PWM_ENABLE) | |
976 | res = 2; | |
977 | return sprintf(buf, "%d\n", res); | |
978 | } | |
979 | ||
980 | static ssize_t store_pwm_enable(struct device *dev, struct device_attribute | |
981 | *devattr, const char *buf, size_t count) | |
982 | { | |
983 | struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); | |
984 | struct abituguru_data *data = dev_get_drvdata(dev); | |
985 | u8 orig_val, user_val = simple_strtoul(buf, NULL, 10); | |
986 | ssize_t ret = count; | |
987 | ||
988 | mutex_lock(&data->update_lock); | |
989 | orig_val = data->pwm_settings[attr->index][0]; | |
990 | switch (user_val) { | |
991 | case 0: | |
992 | data->pwm_settings[attr->index][0] &= | |
993 | ~ABIT_UGURU_FAN_PWM_ENABLE; | |
994 | break; | |
995 | case 2: | |
996 | data->pwm_settings[attr->index][0] |= | |
997 | ABIT_UGURU_FAN_PWM_ENABLE; | |
998 | break; | |
999 | default: | |
1000 | ret = -EINVAL; | |
1001 | } | |
1002 | if ((data->pwm_settings[attr->index][0] != orig_val) && | |
1003 | (abituguru_write(data, ABIT_UGURU_FAN_PWM + 1, | |
1004 | attr->index, data->pwm_settings[attr->index], | |
1005 | 5) < 1)) { | |
1006 | data->pwm_settings[attr->index][0] = orig_val; | |
1007 | ret = -EIO; | |
1008 | } | |
1009 | mutex_unlock(&data->update_lock); | |
1010 | return ret; | |
1011 | } | |
1012 | ||
1013 | static ssize_t show_name(struct device *dev, | |
1014 | struct device_attribute *devattr, char *buf) | |
1015 | { | |
1016 | return sprintf(buf, "%s\n", ABIT_UGURU_NAME); | |
1017 | } | |
1018 | ||
1019 | /* Sysfs attr templates, the real entries are generated automatically. */ | |
1020 | static const | |
1021 | struct sensor_device_attribute_2 abituguru_sysfs_bank1_templ[2][9] = { | |
1022 | { | |
1023 | SENSOR_ATTR_2(in%d_input, 0444, show_bank1_value, NULL, 0, 0), | |
1024 | SENSOR_ATTR_2(in%d_min, 0644, show_bank1_setting, | |
1025 | store_bank1_setting, 1, 0), | |
1026 | SENSOR_ATTR_2(in%d_min_alarm, 0444, show_bank1_alarm, NULL, | |
1027 | ABIT_UGURU_VOLT_LOW_ALARM_FLAG, 0), | |
1028 | SENSOR_ATTR_2(in%d_max, 0644, show_bank1_setting, | |
1029 | store_bank1_setting, 2, 0), | |
1030 | SENSOR_ATTR_2(in%d_max_alarm, 0444, show_bank1_alarm, NULL, | |
1031 | ABIT_UGURU_VOLT_HIGH_ALARM_FLAG, 0), | |
1032 | SENSOR_ATTR_2(in%d_beep, 0644, show_bank1_mask, | |
1033 | store_bank1_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1034 | SENSOR_ATTR_2(in%d_shutdown, 0644, show_bank1_mask, | |
1035 | store_bank1_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1036 | SENSOR_ATTR_2(in%d_min_alarm_enable, 0644, show_bank1_mask, | |
1037 | store_bank1_mask, ABIT_UGURU_VOLT_LOW_ALARM_ENABLE, 0), | |
1038 | SENSOR_ATTR_2(in%d_max_alarm_enable, 0644, show_bank1_mask, | |
1039 | store_bank1_mask, ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE, 0), | |
1040 | }, { | |
1041 | SENSOR_ATTR_2(temp%d_input, 0444, show_bank1_value, NULL, 0, 0), | |
1042 | SENSOR_ATTR_2(temp%d_alarm, 0444, show_bank1_alarm, NULL, | |
1043 | ABIT_UGURU_TEMP_HIGH_ALARM_FLAG, 0), | |
1044 | SENSOR_ATTR_2(temp%d_max, 0644, show_bank1_setting, | |
1045 | store_bank1_setting, 1, 0), | |
1046 | SENSOR_ATTR_2(temp%d_crit, 0644, show_bank1_setting, | |
1047 | store_bank1_setting, 2, 0), | |
1048 | SENSOR_ATTR_2(temp%d_beep, 0644, show_bank1_mask, | |
1049 | store_bank1_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1050 | SENSOR_ATTR_2(temp%d_shutdown, 0644, show_bank1_mask, | |
1051 | store_bank1_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1052 | SENSOR_ATTR_2(temp%d_alarm_enable, 0644, show_bank1_mask, | |
1053 | store_bank1_mask, ABIT_UGURU_TEMP_HIGH_ALARM_ENABLE, 0), | |
1054 | } | |
1055 | }; | |
1056 | ||
1057 | static const struct sensor_device_attribute_2 abituguru_sysfs_fan_templ[6] = { | |
1058 | SENSOR_ATTR_2(fan%d_input, 0444, show_bank2_value, NULL, 0, 0), | |
1059 | SENSOR_ATTR_2(fan%d_alarm, 0444, show_bank2_alarm, NULL, 0, 0), | |
1060 | SENSOR_ATTR_2(fan%d_min, 0644, show_bank2_setting, | |
1061 | store_bank2_setting, 1, 0), | |
1062 | SENSOR_ATTR_2(fan%d_beep, 0644, show_bank2_mask, | |
1063 | store_bank2_mask, ABIT_UGURU_BEEP_ENABLE, 0), | |
1064 | SENSOR_ATTR_2(fan%d_shutdown, 0644, show_bank2_mask, | |
1065 | store_bank2_mask, ABIT_UGURU_SHUTDOWN_ENABLE, 0), | |
1066 | SENSOR_ATTR_2(fan%d_alarm_enable, 0644, show_bank2_mask, | |
1067 | store_bank2_mask, ABIT_UGURU_FAN_LOW_ALARM_ENABLE, 0), | |
1068 | }; | |
1069 | ||
1070 | static const struct sensor_device_attribute_2 abituguru_sysfs_pwm_templ[6] = { | |
1071 | SENSOR_ATTR_2(pwm%d_enable, 0644, show_pwm_enable, | |
1072 | store_pwm_enable, 0, 0), | |
1073 | SENSOR_ATTR_2(pwm%d_auto_channels_temp, 0644, show_pwm_sensor, | |
1074 | store_pwm_sensor, 0, 0), | |
1075 | SENSOR_ATTR_2(pwm%d_auto_point1_pwm, 0644, show_pwm_setting, | |
1076 | store_pwm_setting, 1, 0), | |
1077 | SENSOR_ATTR_2(pwm%d_auto_point2_pwm, 0644, show_pwm_setting, | |
1078 | store_pwm_setting, 2, 0), | |
1079 | SENSOR_ATTR_2(pwm%d_auto_point1_temp, 0644, show_pwm_setting, | |
1080 | store_pwm_setting, 3, 0), | |
1081 | SENSOR_ATTR_2(pwm%d_auto_point2_temp, 0644, show_pwm_setting, | |
1082 | store_pwm_setting, 4, 0), | |
1083 | }; | |
1084 | ||
a2392e0b | 1085 | static struct sensor_device_attribute_2 abituguru_sysfs_attr[] = { |
f2b84bbc HG |
1086 | SENSOR_ATTR_2(name, 0444, show_name, NULL, 0, 0), |
1087 | }; | |
1088 | ||
1089 | static int __devinit abituguru_probe(struct platform_device *pdev) | |
1090 | { | |
1091 | struct abituguru_data *data; | |
a2392e0b | 1092 | int i, j, used, sysfs_names_free, sysfs_attr_i, res = -ENODEV; |
f2b84bbc | 1093 | char *sysfs_filename; |
f2b84bbc HG |
1094 | |
1095 | /* El weirdo probe order, to keep the sysfs order identical to the | |
1096 | BIOS and window-appliction listing order. */ | |
a2392e0b HG |
1097 | const u8 probe_order[ABIT_UGURU_MAX_BANK1_SENSORS] = { |
1098 | 0x00, 0x01, 0x03, 0x04, 0x0A, 0x08, 0x0E, 0x02, | |
1099 | 0x09, 0x06, 0x05, 0x0B, 0x0F, 0x0D, 0x07, 0x0C }; | |
f2b84bbc HG |
1100 | |
1101 | if (!(data = kzalloc(sizeof(struct abituguru_data), GFP_KERNEL))) | |
1102 | return -ENOMEM; | |
1103 | ||
1104 | data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; | |
1105 | mutex_init(&data->update_lock); | |
1106 | platform_set_drvdata(pdev, data); | |
1107 | ||
1108 | /* See if the uGuru is ready */ | |
1109 | if (inb_p(data->addr + ABIT_UGURU_DATA) == ABIT_UGURU_STATUS_INPUT) | |
1110 | data->uguru_ready = 1; | |
1111 | ||
1112 | /* Completely read the uGuru this has 2 purposes: | |
1113 | - testread / see if one really is there. | |
1114 | - make an in memory copy of all the uguru settings for future use. */ | |
1115 | if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, | |
a2392e0b HG |
1116 | data->alarms, 3, ABIT_UGURU_MAX_RETRIES) != 3) |
1117 | goto abituguru_probe_error; | |
f2b84bbc | 1118 | |
a2392e0b | 1119 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { |
f2b84bbc HG |
1120 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, i, |
1121 | &data->bank1_value[i], 1, | |
a2392e0b HG |
1122 | ABIT_UGURU_MAX_RETRIES) != 1) |
1123 | goto abituguru_probe_error; | |
f2b84bbc HG |
1124 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1+1, i, |
1125 | data->bank1_settings[i], 3, | |
a2392e0b HG |
1126 | ABIT_UGURU_MAX_RETRIES) != 3) |
1127 | goto abituguru_probe_error; | |
f2b84bbc HG |
1128 | } |
1129 | /* Note: We don't know how many bank2 sensors / pwms there really are, | |
1130 | but in order to "detect" this we need to read the maximum amount | |
1131 | anyways. If we read sensors/pwms not there we'll just read crap | |
1132 | this can't hurt. We need the detection because we don't want | |
1133 | unwanted writes, which will hurt! */ | |
1134 | for (i = 0; i < ABIT_UGURU_MAX_BANK2_SENSORS; i++) { | |
1135 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2, i, | |
1136 | &data->bank2_value[i], 1, | |
a2392e0b HG |
1137 | ABIT_UGURU_MAX_RETRIES) != 1) |
1138 | goto abituguru_probe_error; | |
f2b84bbc HG |
1139 | if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK2+1, i, |
1140 | data->bank2_settings[i], 2, | |
a2392e0b HG |
1141 | ABIT_UGURU_MAX_RETRIES) != 2) |
1142 | goto abituguru_probe_error; | |
f2b84bbc HG |
1143 | } |
1144 | for (i = 0; i < ABIT_UGURU_MAX_PWMS; i++) { | |
1145 | if (abituguru_read(data, ABIT_UGURU_FAN_PWM, i, | |
1146 | data->pwm_settings[i], 5, | |
a2392e0b HG |
1147 | ABIT_UGURU_MAX_RETRIES) != 5) |
1148 | goto abituguru_probe_error; | |
f2b84bbc HG |
1149 | } |
1150 | data->last_updated = jiffies; | |
1151 | ||
1152 | /* Detect sensor types and fill the sysfs attr for bank1 */ | |
a2392e0b HG |
1153 | sysfs_attr_i = 0; |
1154 | sysfs_filename = data->sysfs_names; | |
1155 | sysfs_names_free = ABITUGURU_SYSFS_NAMES_LENGTH; | |
1156 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { | |
f2b84bbc | 1157 | res = abituguru_detect_bank1_sensor_type(data, probe_order[i]); |
a2392e0b HG |
1158 | if (res < 0) |
1159 | goto abituguru_probe_error; | |
f2b84bbc HG |
1160 | if (res == ABIT_UGURU_NC) |
1161 | continue; | |
1162 | ||
a2392e0b | 1163 | /* res 1 (temp) sensors have 7 sysfs entries, 0 (in) 9 */ |
f2b84bbc | 1164 | for (j = 0; j < (res ? 7 : 9); j++) { |
a2392e0b HG |
1165 | used = snprintf(sysfs_filename, sysfs_names_free, |
1166 | abituguru_sysfs_bank1_templ[res][j].dev_attr. | |
1167 | attr.name, data->bank1_sensors[res] + res) | |
1168 | + 1; | |
f2b84bbc HG |
1169 | data->sysfs_attr[sysfs_attr_i] = |
1170 | abituguru_sysfs_bank1_templ[res][j]; | |
1171 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1172 | sysfs_filename; | |
f2b84bbc | 1173 | data->sysfs_attr[sysfs_attr_i].index = probe_order[i]; |
a2392e0b HG |
1174 | sysfs_filename += used; |
1175 | sysfs_names_free -= used; | |
f2b84bbc HG |
1176 | sysfs_attr_i++; |
1177 | } | |
1178 | data->bank1_max_value[probe_order[i]] = | |
1179 | abituguru_bank1_max_value[res]; | |
1180 | data->bank1_address[res][data->bank1_sensors[res]] = | |
1181 | probe_order[i]; | |
1182 | data->bank1_sensors[res]++; | |
1183 | } | |
1184 | /* Detect number of sensors and fill the sysfs attr for bank2 (fans) */ | |
1185 | abituguru_detect_no_bank2_sensors(data); | |
1186 | for (i = 0; i < data->bank2_sensors; i++) { | |
a2392e0b HG |
1187 | for (j = 0; j < ARRAY_SIZE(abituguru_sysfs_fan_templ); j++) { |
1188 | used = snprintf(sysfs_filename, sysfs_names_free, | |
1189 | abituguru_sysfs_fan_templ[j].dev_attr.attr.name, | |
1190 | i + 1) + 1; | |
f2b84bbc HG |
1191 | data->sysfs_attr[sysfs_attr_i] = |
1192 | abituguru_sysfs_fan_templ[j]; | |
1193 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1194 | sysfs_filename; | |
f2b84bbc | 1195 | data->sysfs_attr[sysfs_attr_i].index = i; |
a2392e0b HG |
1196 | sysfs_filename += used; |
1197 | sysfs_names_free -= used; | |
f2b84bbc HG |
1198 | sysfs_attr_i++; |
1199 | } | |
1200 | } | |
1201 | /* Detect number of sensors and fill the sysfs attr for pwms */ | |
1202 | abituguru_detect_no_pwms(data); | |
1203 | for (i = 0; i < data->pwms; i++) { | |
a2392e0b HG |
1204 | for (j = 0; j < ARRAY_SIZE(abituguru_sysfs_pwm_templ); j++) { |
1205 | used = snprintf(sysfs_filename, sysfs_names_free, | |
1206 | abituguru_sysfs_pwm_templ[j].dev_attr.attr.name, | |
1207 | i + 1) + 1; | |
f2b84bbc HG |
1208 | data->sysfs_attr[sysfs_attr_i] = |
1209 | abituguru_sysfs_pwm_templ[j]; | |
1210 | data->sysfs_attr[sysfs_attr_i].dev_attr.attr.name = | |
1211 | sysfs_filename; | |
f2b84bbc | 1212 | data->sysfs_attr[sysfs_attr_i].index = i; |
a2392e0b HG |
1213 | sysfs_filename += used; |
1214 | sysfs_names_free -= used; | |
f2b84bbc HG |
1215 | sysfs_attr_i++; |
1216 | } | |
1217 | } | |
a2392e0b HG |
1218 | /* Fail safe check, this should never happen! */ |
1219 | if (sysfs_names_free < 0) { | |
1220 | printk(KERN_ERR ABIT_UGURU_NAME ": Fatal error ran out of " | |
1221 | "space for sysfs attr names. This should never " | |
1222 | "happen please report to the abituguru maintainer " | |
1223 | "(see MAINTAINERS)\n"); | |
1224 | res = -ENAMETOOLONG; | |
1225 | goto abituguru_probe_error; | |
f2b84bbc HG |
1226 | } |
1227 | printk(KERN_INFO ABIT_UGURU_NAME ": found Abit uGuru\n"); | |
1228 | ||
1229 | /* Register sysfs hooks */ | |
1230 | data->class_dev = hwmon_device_register(&pdev->dev); | |
1231 | if (IS_ERR(data->class_dev)) { | |
a2392e0b HG |
1232 | res = PTR_ERR(data->class_dev); |
1233 | goto abituguru_probe_error; | |
f2b84bbc HG |
1234 | } |
1235 | for (i = 0; i < sysfs_attr_i; i++) | |
1236 | device_create_file(&pdev->dev, &data->sysfs_attr[i].dev_attr); | |
a2392e0b HG |
1237 | for (i = 0; i < ARRAY_SIZE(abituguru_sysfs_attr); i++) |
1238 | device_create_file(&pdev->dev, | |
1239 | &abituguru_sysfs_attr[i].dev_attr); | |
f2b84bbc HG |
1240 | |
1241 | return 0; | |
a2392e0b HG |
1242 | |
1243 | abituguru_probe_error: | |
1244 | kfree(data); | |
1245 | return res; | |
f2b84bbc HG |
1246 | } |
1247 | ||
1248 | static int __devexit abituguru_remove(struct platform_device *pdev) | |
1249 | { | |
1250 | struct abituguru_data *data = platform_get_drvdata(pdev); | |
1251 | ||
1252 | platform_set_drvdata(pdev, NULL); | |
1253 | hwmon_device_unregister(data->class_dev); | |
1254 | kfree(data); | |
1255 | ||
1256 | return 0; | |
1257 | } | |
1258 | ||
1259 | static struct abituguru_data *abituguru_update_device(struct device *dev) | |
1260 | { | |
1261 | int i, err; | |
1262 | struct abituguru_data *data = dev_get_drvdata(dev); | |
1263 | /* fake a complete successful read if no update necessary. */ | |
1264 | char success = 1; | |
1265 | ||
1266 | mutex_lock(&data->update_lock); | |
1267 | if (time_after(jiffies, data->last_updated + HZ)) { | |
1268 | success = 0; | |
1269 | if ((err = abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, | |
1270 | data->alarms, 3, 0)) != 3) | |
1271 | goto LEAVE_UPDATE; | |
a2392e0b | 1272 | for (i = 0; i < ABIT_UGURU_MAX_BANK1_SENSORS; i++) { |
f2b84bbc HG |
1273 | if ((err = abituguru_read(data, |
1274 | ABIT_UGURU_SENSOR_BANK1, i, | |
1275 | &data->bank1_value[i], 1, 0)) != 1) | |
1276 | goto LEAVE_UPDATE; | |
1277 | if ((err = abituguru_read(data, | |
1278 | ABIT_UGURU_SENSOR_BANK1 + 1, i, | |
1279 | data->bank1_settings[i], 3, 0)) != 3) | |
1280 | goto LEAVE_UPDATE; | |
1281 | } | |
1282 | for (i = 0; i < data->bank2_sensors; i++) | |
1283 | if ((err = abituguru_read(data, | |
1284 | ABIT_UGURU_SENSOR_BANK2, i, | |
1285 | &data->bank2_value[i], 1, 0)) != 1) | |
1286 | goto LEAVE_UPDATE; | |
1287 | /* success! */ | |
1288 | success = 1; | |
1289 | data->update_timeouts = 0; | |
1290 | LEAVE_UPDATE: | |
1291 | /* handle timeout condition */ | |
1292 | if (err == -EBUSY) { | |
1293 | /* No overflow please */ | |
1294 | if (data->update_timeouts < 255u) | |
1295 | data->update_timeouts++; | |
1296 | if (data->update_timeouts <= ABIT_UGURU_MAX_TIMEOUTS) { | |
1297 | ABIT_UGURU_DEBUG(3, "timeout exceeded, will " | |
1298 | "try again next update\n"); | |
1299 | /* Just a timeout, fake a successful read */ | |
1300 | success = 1; | |
1301 | } else | |
1302 | ABIT_UGURU_DEBUG(1, "timeout exceeded %d " | |
1303 | "times waiting for more input state\n", | |
1304 | (int)data->update_timeouts); | |
1305 | } | |
1306 | /* On success set last_updated */ | |
1307 | if (success) | |
1308 | data->last_updated = jiffies; | |
1309 | } | |
1310 | mutex_unlock(&data->update_lock); | |
1311 | ||
1312 | if (success) | |
1313 | return data; | |
1314 | else | |
1315 | return NULL; | |
1316 | } | |
1317 | ||
1318 | static struct platform_driver abituguru_driver = { | |
1319 | .driver = { | |
1320 | .owner = THIS_MODULE, | |
1321 | .name = ABIT_UGURU_NAME, | |
1322 | }, | |
1323 | .probe = abituguru_probe, | |
1324 | .remove = __devexit_p(abituguru_remove), | |
1325 | }; | |
1326 | ||
1327 | static int __init abituguru_detect(void) | |
1328 | { | |
1329 | /* See if there is an uguru there. After a reboot uGuru will hold 0x00 | |
1330 | at DATA and 0xAC, when this driver has already been loaded once | |
1331 | DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either | |
1332 | scenario but some will hold 0x00. | |
1333 | Some uGuru's initally hold 0x09 at DATA and will only hold 0x08 | |
1334 | after reading CMD first, so CMD must be read first! */ | |
1335 | u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD); | |
1336 | u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA); | |
1337 | if (((data_val == 0x00) || (data_val == 0x08)) && | |
1338 | ((cmd_val == 0x00) || (cmd_val == 0xAC))) | |
1339 | return ABIT_UGURU_BASE; | |
1340 | ||
1341 | ABIT_UGURU_DEBUG(2, "no Abit uGuru found, data = 0x%02X, cmd = " | |
1342 | "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val); | |
1343 | ||
1344 | if (force) { | |
1345 | printk(KERN_INFO ABIT_UGURU_NAME ": Assuming Abit uGuru is " | |
1346 | "present because of \"force\" parameter\n"); | |
1347 | return ABIT_UGURU_BASE; | |
1348 | } | |
1349 | ||
1350 | /* No uGuru found */ | |
1351 | return -ENODEV; | |
1352 | } | |
1353 | ||
1354 | static struct platform_device *abituguru_pdev; | |
1355 | ||
1356 | static int __init abituguru_init(void) | |
1357 | { | |
1358 | int address, err; | |
1359 | struct resource res = { .flags = IORESOURCE_IO }; | |
1360 | ||
1361 | address = abituguru_detect(); | |
1362 | if (address < 0) | |
1363 | return address; | |
1364 | ||
1365 | err = platform_driver_register(&abituguru_driver); | |
1366 | if (err) | |
1367 | goto exit; | |
1368 | ||
1369 | abituguru_pdev = platform_device_alloc(ABIT_UGURU_NAME, address); | |
1370 | if (!abituguru_pdev) { | |
1371 | printk(KERN_ERR ABIT_UGURU_NAME | |
1372 | ": Device allocation failed\n"); | |
1373 | err = -ENOMEM; | |
1374 | goto exit_driver_unregister; | |
1375 | } | |
1376 | ||
1377 | res.start = address; | |
1378 | res.end = address + ABIT_UGURU_REGION_LENGTH - 1; | |
1379 | res.name = ABIT_UGURU_NAME; | |
1380 | ||
1381 | err = platform_device_add_resources(abituguru_pdev, &res, 1); | |
1382 | if (err) { | |
1383 | printk(KERN_ERR ABIT_UGURU_NAME | |
1384 | ": Device resource addition failed (%d)\n", err); | |
1385 | goto exit_device_put; | |
1386 | } | |
1387 | ||
1388 | err = platform_device_add(abituguru_pdev); | |
1389 | if (err) { | |
1390 | printk(KERN_ERR ABIT_UGURU_NAME | |
1391 | ": Device addition failed (%d)\n", err); | |
1392 | goto exit_device_put; | |
1393 | } | |
1394 | ||
1395 | return 0; | |
1396 | ||
1397 | exit_device_put: | |
1398 | platform_device_put(abituguru_pdev); | |
1399 | exit_driver_unregister: | |
1400 | platform_driver_unregister(&abituguru_driver); | |
1401 | exit: | |
1402 | return err; | |
1403 | } | |
1404 | ||
1405 | static void __exit abituguru_exit(void) | |
1406 | { | |
1407 | platform_device_unregister(abituguru_pdev); | |
1408 | platform_driver_unregister(&abituguru_driver); | |
1409 | } | |
1410 | ||
1411 | MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); | |
1412 | MODULE_DESCRIPTION("Abit uGuru Sensor device"); | |
1413 | MODULE_LICENSE("GPL"); | |
1414 | ||
1415 | module_init(abituguru_init); | |
1416 | module_exit(abituguru_exit); |