Commit | Line | Data |
---|---|---|
ad2f931d | 1 | # |
060b2f55 | 2 | # Hardware monitoring chip drivers configuration |
ad2f931d JD |
3 | # |
4 | ||
1d72acf9 | 5 | menuconfig HWMON |
ad2f931d | 6 | tristate "Hardware Monitoring support" |
e25df120 | 7 | depends on HAS_IOMEM |
ad2f931d JD |
8 | default y |
9 | help | |
10 | Hardware monitoring devices let you monitor the hardware health | |
11 | of a system. Most modern motherboards include such a device. It | |
12 | can include temperature sensors, voltage sensors, fan speed | |
13 | sensors and various additional features such as the ability to | |
1236441f MH |
14 | control the speed of the fans. If you want this support you |
15 | should say Y here and also to the specific driver(s) for your | |
16 | sensors chip(s) below. | |
17 | ||
0d0001dd JD |
18 | To find out which specific driver(s) you need, use the |
19 | sensors-detect script from the lm_sensors package. Read | |
20 | <file:Documentation/hwmon/userspace-tools> for details. | |
21 | ||
1236441f MH |
22 | This support can also be built as a module. If so, the module |
23 | will be called hwmon. | |
ad2f931d | 24 | |
1d72acf9 JE |
25 | if HWMON |
26 | ||
303760b4 JD |
27 | config HWMON_VID |
28 | tristate | |
29 | default n | |
30 | ||
61cba5c2 JD |
31 | config HWMON_DEBUG_CHIP |
32 | bool "Hardware Monitoring Chip debugging messages" | |
33 | default n | |
34 | help | |
35 | Say Y here if you want the I2C chip drivers to produce a bunch of | |
36 | debug messages to the system log. Select this if you are having | |
37 | a problem with I2C support and want to see more of what is going | |
38 | on. | |
39 | ||
40 | comment "Native drivers" | |
41 | ||
f2b84bbc | 42 | config SENSORS_ABITUGURU |
3faa1ffb | 43 | tristate "Abit uGuru (rev 1 & 2)" |
e2d8c2b6 | 44 | depends on X86 && DMI |
f2b84bbc | 45 | help |
3faa1ffb HG |
46 | If you say yes here you get support for the sensor part of the first |
47 | and second revision of the Abit uGuru chip. The voltage and frequency | |
48 | control parts of the Abit uGuru are not supported. The Abit uGuru | |
49 | chip can be found on Abit uGuru featuring motherboards (most modern | |
50 | Abit motherboards from before end 2005). For more info and a list | |
51 | of which motherboards have which revision see | |
52 | Documentation/hwmon/abituguru | |
f2b84bbc HG |
53 | |
54 | This driver can also be built as a module. If so, the module | |
55 | will be called abituguru. | |
56 | ||
3faa1ffb HG |
57 | config SENSORS_ABITUGURU3 |
58 | tristate "Abit uGuru (rev 3)" | |
e2d8c2b6 | 59 | depends on X86 && DMI |
3faa1ffb HG |
60 | help |
61 | If you say yes here you get support for the sensor part of the | |
62 | third revision of the Abit uGuru chip. Only reading the sensors | |
63 | and their settings is supported. The third revision of the Abit | |
64 | uGuru chip can be found on recent Abit motherboards (since end | |
65 | 2005). For more info and a list of which motherboards have which | |
66 | revision see Documentation/hwmon/abituguru3 | |
67 | ||
68 | This driver can also be built as a module. If so, the module | |
69 | will be called abituguru3. | |
70 | ||
4f3a6595 JC |
71 | config SENSORS_AD7314 |
72 | tristate "Analog Devices AD7314 and compatibles" | |
e2d8c2b6 | 73 | depends on SPI |
4f3a6595 JC |
74 | help |
75 | If you say yes here you get support for the Analog Devices | |
76 | AD7314, ADT7301 and ADT7302 temperature sensors. | |
77 | ||
78 | This driver can also be built as a module. If so, the module | |
79 | will be called ad7314. | |
80 | ||
6c633c30 SM |
81 | config SENSORS_AD7414 |
82 | tristate "Analog Devices AD7414" | |
e2d8c2b6 | 83 | depends on I2C |
6c633c30 SM |
84 | help |
85 | If you say yes here you get support for the Analog Devices | |
86 | AD7414 temperature monitoring chip. | |
87 | ||
88 | This driver can also be built as a module. If so, the module | |
89 | will be called ad7414. | |
90 | ||
2d8dd65f AZ |
91 | config SENSORS_AD7418 |
92 | tristate "Analog Devices AD7416, AD7417 and AD7418" | |
e2d8c2b6 | 93 | depends on I2C |
2d8dd65f AZ |
94 | help |
95 | If you say yes here you get support for the Analog Devices | |
96 | AD7416, AD7417 and AD7418 temperature monitoring chips. | |
97 | ||
98 | This driver can also be built as a module. If so, the module | |
99 | will be called ad7418. | |
100 | ||
d42139a3 MP |
101 | config SENSORS_ADCXX |
102 | tristate "National Semiconductor ADCxxxSxxx" | |
e2d8c2b6 | 103 | depends on SPI_MASTER |
d42139a3 MP |
104 | help |
105 | If you say yes here you get support for the National Semiconductor | |
106 | ADC<bb><c>S<sss> chip family, where | |
107 | * bb is the resolution in number of bits (8, 10, 12) | |
108 | * c is the number of channels (1, 2, 4, 8) | |
109 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
110 | kSPS and 101 for 1 MSPS) | |
111 | ||
112 | Examples : ADC081S101, ADC124S501, ... | |
113 | ||
114 | This driver can also be built as a module. If so, the module | |
115 | will be called adcxx. | |
116 | ||
ad2f931d JD |
117 | config SENSORS_ADM1021 |
118 | tristate "Analog Devices ADM1021 and compatibles" | |
1d72acf9 | 119 | depends on I2C |
ad2f931d JD |
120 | help |
121 | If you say yes here you get support for Analog Devices ADM1021 | |
122 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
d7ce0335 | 123 | Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. |
ad2f931d JD |
124 | |
125 | This driver can also be built as a module. If so, the module | |
126 | will be called adm1021. | |
127 | ||
128 | config SENSORS_ADM1025 | |
129 | tristate "Analog Devices ADM1025 and compatibles" | |
1d72acf9 | 130 | depends on I2C |
303760b4 | 131 | select HWMON_VID |
ad2f931d JD |
132 | help |
133 | If you say yes here you get support for Analog Devices ADM1025 | |
134 | and Philips NE1619 sensor chips. | |
135 | ||
136 | This driver can also be built as a module. If so, the module | |
137 | will be called adm1025. | |
138 | ||
139 | config SENSORS_ADM1026 | |
140 | tristate "Analog Devices ADM1026 and compatibles" | |
0b22ce3b | 141 | depends on I2C |
303760b4 | 142 | select HWMON_VID |
ad2f931d JD |
143 | help |
144 | If you say yes here you get support for Analog Devices ADM1026 | |
145 | sensor chip. | |
146 | ||
147 | This driver can also be built as a module. If so, the module | |
148 | will be called adm1026. | |
149 | ||
cae2caae CL |
150 | config SENSORS_ADM1029 |
151 | tristate "Analog Devices ADM1029" | |
0b22ce3b | 152 | depends on I2C |
cae2caae CL |
153 | help |
154 | If you say yes here you get support for Analog Devices ADM1029 | |
155 | sensor chip. | |
156 | Very rare chip, please let us know you use it. | |
157 | ||
158 | This driver can also be built as a module. If so, the module | |
159 | will be called adm1029. | |
160 | ||
ad2f931d JD |
161 | config SENSORS_ADM1031 |
162 | tristate "Analog Devices ADM1031 and compatibles" | |
0b22ce3b | 163 | depends on I2C |
ad2f931d JD |
164 | help |
165 | If you say yes here you get support for Analog Devices ADM1031 | |
166 | and ADM1030 sensor chips. | |
167 | ||
168 | This driver can also be built as a module. If so, the module | |
169 | will be called adm1031. | |
170 | ||
171 | config SENSORS_ADM9240 | |
172 | tristate "Analog Devices ADM9240 and compatibles" | |
68f823de | 173 | depends on I2C |
303760b4 | 174 | select HWMON_VID |
ad2f931d JD |
175 | help |
176 | If you say yes here you get support for Analog Devices ADM9240, | |
177 | Dallas DS1780, National Semiconductor LM81 sensor chips. | |
178 | ||
179 | This driver can also be built as a module. If so, the module | |
180 | will be called adm9240. | |
181 | ||
983b97be HK |
182 | config SENSORS_ADT7410 |
183 | tristate "Analog Devices ADT7410" | |
e2d8c2b6 | 184 | depends on I2C |
983b97be HK |
185 | help |
186 | If you say yes here you get support for the Analog Devices | |
187 | ADT7410 temperature monitoring chip. | |
188 | ||
189 | This driver can also be built as a module. If so, the module | |
190 | will be called adt7410. | |
191 | ||
d84ca5b3 WS |
192 | config SENSORS_ADT7411 |
193 | tristate "Analog Devices ADT7411" | |
e2d8c2b6 | 194 | depends on I2C |
d84ca5b3 WS |
195 | help |
196 | If you say yes here you get support for the Analog Devices | |
197 | ADT7411 voltage and temperature monitoring chip. | |
198 | ||
199 | This driver can also be built as a module. If so, the module | |
200 | will be called adt7411. | |
201 | ||
c0b4e3ab DW |
202 | config SENSORS_ADT7462 |
203 | tristate "Analog Devices ADT7462" | |
e2d8c2b6 | 204 | depends on I2C |
c0b4e3ab DW |
205 | help |
206 | If you say yes here you get support for the Analog Devices | |
207 | ADT7462 temperature monitoring chips. | |
208 | ||
209 | This driver can also be built as a module. If so, the module | |
210 | will be called adt7462. | |
211 | ||
6f9703d0 DW |
212 | config SENSORS_ADT7470 |
213 | tristate "Analog Devices ADT7470" | |
e2d8c2b6 | 214 | depends on I2C |
6f9703d0 DW |
215 | help |
216 | If you say yes here you get support for the Analog Devices | |
217 | ADT7470 temperature monitoring chips. | |
218 | ||
219 | This driver can also be built as a module. If so, the module | |
220 | will be called adt7470. | |
221 | ||
1c301fc5 | 222 | config SENSORS_ADT7475 |
d8d2ee07 | 223 | tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" |
0b22ce3b | 224 | depends on I2C |
54fe4671 | 225 | select HWMON_VID |
1c301fc5 JC |
226 | help |
227 | If you say yes here you get support for the Analog Devices | |
d8d2ee07 JD |
228 | ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring |
229 | chips. | |
1c301fc5 JC |
230 | |
231 | This driver can also be build as a module. If so, the module | |
232 | will be called adt7475. | |
233 | ||
d58de038 GJ |
234 | config SENSORS_ASC7621 |
235 | tristate "Andigilog aSC7621" | |
9854f971 | 236 | depends on I2C |
d58de038 GJ |
237 | help |
238 | If you say yes here you get support for the aSC7621 | |
b00d8a7e JSR |
239 | family of SMBus sensors chip found on most Intel X38, X48, X58, |
240 | 945, 965 and 975 desktop boards. Currently supported chips: | |
d58de038 GJ |
241 | aSC7621 |
242 | aSC7621a | |
243 | ||
244 | This driver can also be built as a module. If so, the module | |
245 | will be called asc7621. | |
246 | ||
29fa06c1 | 247 | config SENSORS_K8TEMP |
4660cb35 | 248 | tristate "AMD Athlon64/FX or Opteron temperature sensor" |
e2d8c2b6 | 249 | depends on X86 && PCI |
29fa06c1 RM |
250 | help |
251 | If you say yes here you get support for the temperature | |
4660cb35 RM |
252 | sensor(s) inside your CPU. Supported is whole AMD K8 |
253 | microarchitecture. Please note that you will need at least | |
254 | lm-sensors 2.10.1 for proper userspace support. | |
29fa06c1 RM |
255 | |
256 | This driver can also be built as a module. If so, the module | |
257 | will be called k8temp. | |
258 | ||
3c57e89b | 259 | config SENSORS_K10TEMP |
9e581311 | 260 | tristate "AMD Family 10h+ temperature sensor" |
3c57e89b CL |
261 | depends on X86 && PCI |
262 | help | |
263 | If you say yes here you get support for the temperature | |
264 | sensor(s) inside your CPU. Supported are later revisions of | |
aa4790a6 | 265 | the AMD Family 10h and all revisions of the AMD Family 11h, |
fbc729a4 AP |
266 | 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) |
267 | microarchitectures. | |
3c57e89b CL |
268 | |
269 | This driver can also be built as a module. If so, the module | |
270 | will be called k10temp. | |
271 | ||
512d1027 AH |
272 | config SENSORS_FAM15H_POWER |
273 | tristate "AMD Family 15h processor power" | |
274 | depends on X86 && PCI | |
275 | help | |
276 | If you say yes here you get support for processor power | |
277 | information of your AMD family 15h CPU. | |
278 | ||
279 | This driver can also be built as a module. If so, the module | |
280 | will be called fam15h_power. | |
281 | ||
ad2f931d JD |
282 | config SENSORS_ASB100 |
283 | tristate "Asus ASB100 Bach" | |
e2d8c2b6 | 284 | depends on X86 && I2C |
303760b4 | 285 | select HWMON_VID |
ad2f931d JD |
286 | help |
287 | If you say yes here you get support for the ASB100 Bach sensor | |
288 | chip found on some Asus mainboards. | |
289 | ||
290 | This driver can also be built as a module. If so, the module | |
291 | will be called asb100. | |
292 | ||
293 | config SENSORS_ATXP1 | |
294 | tristate "Attansic ATXP1 VID controller" | |
e2d8c2b6 | 295 | depends on I2C |
303760b4 | 296 | select HWMON_VID |
ad2f931d JD |
297 | help |
298 | If you say yes here you get support for the Attansic ATXP1 VID | |
299 | controller. | |
300 | ||
301 | If your board have such a chip, you are able to control your CPU | |
302 | core and other voltages. | |
303 | ||
304 | This driver can also be built as a module. If so, the module | |
305 | will be called atxp1. | |
306 | ||
60994698 RS |
307 | config SENSORS_DS620 |
308 | tristate "Dallas Semiconductor DS620" | |
309 | depends on I2C | |
310 | help | |
311 | If you say yes here you get support for Dallas Semiconductor | |
312 | DS620 sensor chip. | |
313 | ||
314 | This driver can also be built as a module. If so, the module | |
315 | will be called ds620. | |
316 | ||
ad2f931d JD |
317 | config SENSORS_DS1621 |
318 | tristate "Dallas Semiconductor DS1621 and DS1625" | |
1d72acf9 | 319 | depends on I2C |
ad2f931d JD |
320 | help |
321 | If you say yes here you get support for Dallas Semiconductor | |
322 | DS1621 and DS1625 sensor chips. | |
323 | ||
324 | This driver can also be built as a module. If so, the module | |
325 | will be called ds1621. | |
326 | ||
e41f6432 AJ |
327 | config SENSORS_DA9052_ADC |
328 | tristate "Dialog DA9052/DA9053 ADC" | |
329 | depends on PMIC_DA9052 | |
330 | help | |
331 | Say y here to support the ADC found on Dialog Semiconductor | |
332 | DA9052-BC and DA9053-AA/Bx PMICs. | |
333 | ||
334 | This driver can also be built as module. If so, the module | |
335 | will be called da9052-hwmon. | |
336 | ||
e5970223 AJ |
337 | config SENSORS_DA9055 |
338 | tristate "Dialog Semiconductor DA9055 ADC" | |
339 | depends on MFD_DA9055 | |
340 | help | |
341 | If you say yes here you get support for ADC on the Dialog | |
342 | Semiconductor DA9055 PMIC. | |
343 | ||
344 | This driver can also be built as a module. If so, the module | |
345 | will be called da9055-hwmon. | |
346 | ||
298c7524 DW |
347 | config SENSORS_I5K_AMB |
348 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
e2d8c2b6 | 349 | depends on PCI |
298c7524 DW |
350 | help |
351 | If you say yes here you get support for FB-DIMM AMB temperature | |
352 | monitoring chips on systems with the Intel 5000 series chipset. | |
353 | ||
354 | This driver can also be built as a module. If so, the module | |
355 | will be called i5k_amb. | |
356 | ||
e53004e2 | 357 | config SENSORS_F71805F |
9cab0217 | 358 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" |
746cdfbf | 359 | depends on !PPC |
e53004e2 JD |
360 | help |
361 | If you say yes here you get support for hardware monitoring | |
9cab0217 JD |
362 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG |
363 | Super-I/O chips. | |
e53004e2 JD |
364 | |
365 | This driver can also be built as a module. If so, the module | |
366 | will be called f71805f. | |
367 | ||
45fb3669 | 368 | config SENSORS_F71882FG |
5d7f77bf | 369 | tristate "Fintek F71882FG and compatibles" |
746cdfbf | 370 | depends on !PPC |
45fb3669 | 371 | help |
f2e41e91 | 372 | If you say yes here you get support for hardware monitoring |
5d7f77bf JD |
373 | features of many Fintek Super-I/O (LPC) chips. The currently |
374 | supported chips are: | |
629c58ba | 375 | F71808E/A |
5d7f77bf JD |
376 | F71858FG |
377 | F71862FG | |
378 | F71863FG | |
5da556e3 | 379 | F71869F/E/A |
5d7f77bf JD |
380 | F71882FG |
381 | F71883FG | |
a66c1088 | 382 | F71889FG/ED/A |
5d7f77bf JD |
383 | F8000 |
384 | F81801U | |
383586b1 | 385 | F81865F |
45fb3669 HG |
386 | |
387 | This driver can also be built as a module. If so, the module | |
388 | will be called f71882fg. | |
389 | ||
84f1e442 | 390 | config SENSORS_F75375S |
f58c44e6 | 391 | tristate "Fintek F75375S/SP, F75373 and F75387" |
0b22ce3b | 392 | depends on I2C |
84f1e442 RV |
393 | help |
394 | If you say yes here you get support for hardware monitoring | |
f58c44e6 | 395 | features of the Fintek F75375S/SP, F75373 and F75387 |
84f1e442 RV |
396 | |
397 | This driver can also be built as a module. If so, the module | |
398 | will be called f75375s. | |
399 | ||
569ff102 | 400 | config SENSORS_FSCHMD |
c69ab2b7 | 401 | tristate "Fujitsu Siemens Computers sensor chips" |
0589c2de | 402 | depends on X86 && I2C |
569ff102 | 403 | help |
c69ab2b7 HG |
404 | If you say yes here you get support for the following Fujitsu |
405 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
de15f093 HG |
406 | Heimdall, Heracles, Hades and Syleus including support for the |
407 | integrated watchdog. | |
569ff102 | 408 | |
0589c2de HG |
409 | This is a merged driver for FSC sensor chips replacing the fscpos, |
410 | fscscy and fscher drivers and adding support for several other FSC | |
411 | sensor chips. | |
569ff102 HG |
412 | |
413 | This driver can also be built as a module. If so, the module | |
414 | will be called fschmd. | |
415 | ||
3bcfa9e4 HVR |
416 | config SENSORS_G760A |
417 | tristate "GMT G760A" | |
418 | depends on I2C | |
419 | help | |
420 | If you say yes here you get support for Global Mixed-mode | |
421 | Technology Inc G760A fan speed PWM controller chips. | |
422 | ||
423 | This driver can also be built as a module. If so, the module | |
424 | will be called g760a. | |
425 | ||
ad2f931d JD |
426 | config SENSORS_GL518SM |
427 | tristate "Genesys Logic GL518SM" | |
1d72acf9 | 428 | depends on I2C |
ad2f931d JD |
429 | help |
430 | If you say yes here you get support for Genesys Logic GL518SM | |
431 | sensor chips. | |
432 | ||
433 | This driver can also be built as a module. If so, the module | |
434 | will be called gl518sm. | |
435 | ||
436 | config SENSORS_GL520SM | |
437 | tristate "Genesys Logic GL520SM" | |
1d72acf9 | 438 | depends on I2C |
303760b4 | 439 | select HWMON_VID |
ad2f931d JD |
440 | help |
441 | If you say yes here you get support for Genesys Logic GL520SM | |
442 | sensor chips. | |
443 | ||
444 | This driver can also be built as a module. If so, the module | |
445 | will be called gl520sm. | |
446 | ||
d6fe1360 SG |
447 | config SENSORS_GPIO_FAN |
448 | tristate "GPIO fan" | |
c1a12602 | 449 | depends on GPIOLIB |
d6fe1360 SG |
450 | help |
451 | If you say yes here you get support for fans connected to GPIO lines. | |
452 | ||
453 | This driver can also be built as a module. If so, the module | |
454 | will be called gpio-fan. | |
455 | ||
27f8b135 IP |
456 | config SENSORS_HIH6130 |
457 | tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" | |
e2d8c2b6 | 458 | depends on I2C |
27f8b135 IP |
459 | help |
460 | If you say yes here you get support for Honeywell Humidicon | |
461 | HIH-6130 and HIH-6131 Humidicon humidity sensors. | |
462 | ||
463 | This driver can also be built as a module. If so, the module | |
464 | will be called hih6130. | |
465 | ||
bebe4678 | 466 | config SENSORS_CORETEMP |
708a62bc | 467 | tristate "Intel Core/Core2/Atom temperature sensor" |
72cbdddc | 468 | depends on X86 |
bebe4678 RM |
469 | help |
470 | If you say yes here you get support for the temperature | |
708a62bc | 471 | sensor inside your CPU. Most of the family 6 CPUs |
f3cffe4d | 472 | are supported. Check Documentation/hwmon/coretemp for details. |
bebe4678 | 473 | |
8808a793 DW |
474 | config SENSORS_IBMAEM |
475 | tristate "IBM Active Energy Manager temperature/power sensors and control" | |
476 | select IPMI_SI | |
477 | depends on IPMI_HANDLER | |
478 | help | |
479 | If you say yes here you get support for the temperature and | |
480 | power sensors and capping hardware in various IBM System X | |
481 | servers that support Active Energy Manager. This includes | |
482 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
8070408b | 483 | and certain HC10/HS2x/LS2x/QS2x blades. |
8808a793 DW |
484 | |
485 | This driver can also be built as a module. If so, the module | |
486 | will be called ibmaem. | |
487 | ||
57c7c3a0 DW |
488 | config SENSORS_IBMPEX |
489 | tristate "IBM PowerExecutive temperature/power sensors" | |
490 | select IPMI_SI | |
491 | depends on IPMI_HANDLER | |
492 | help | |
493 | If you say yes here you get support for the temperature and | |
494 | power sensors in various IBM System X servers that support | |
3d960a99 DW |
495 | PowerExecutive. So far this includes the x3350, x3550, x3650, |
496 | x3655, and x3755; the x3800, x3850, and x3950 models that have | |
497 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
57c7c3a0 DW |
498 | |
499 | This driver can also be built as a module. If so, the module | |
500 | will be called ibmpex. | |
501 | ||
ad2f931d JD |
502 | config SENSORS_IT87 |
503 | tristate "ITE IT87xx and compatibles" | |
746cdfbf | 504 | depends on !PPC |
303760b4 | 505 | select HWMON_VID |
ad2f931d | 506 | help |
87673dd7 | 507 | If you say yes here you get support for ITE IT8705F, IT8712F, |
ca2e24cb | 508 | IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, |
b0636707 GR |
509 | IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the |
510 | SiS950 clone. | |
ad2f931d JD |
511 | |
512 | This driver can also be built as a module. If so, the module | |
513 | will be called it87. | |
514 | ||
7f983ba9 LPC |
515 | config SENSORS_JZ4740 |
516 | tristate "Ingenic JZ4740 SoC ADC driver" | |
517 | depends on MACH_JZ4740 && MFD_JZ4740_ADC | |
518 | help | |
519 | If you say yes here you get support for reading adc values from the ADCIN | |
520 | pin on Ingenic JZ4740 SoC based boards. | |
521 | ||
522 | This driver can also be build as a module. If so, the module will be | |
523 | called jz4740-hwmon. | |
524 | ||
4453d736 | 525 | config SENSORS_JC42 |
d5622f5b | 526 | tristate "JEDEC JC42.4 compliant memory module temperature sensors" |
4bd2691d | 527 | depends on I2C |
4453d736 | 528 | help |
d5622f5b CL |
529 | If you say yes here, you get support for JEDEC JC42.4 compliant |
530 | temperature sensors, which are used on many DDR3 memory modules for | |
531 | mobile devices and servers. Support will include, but not be limited | |
1bd612a2 GR |
532 | to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, |
533 | MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, | |
534 | STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. | |
4453d736 GR |
535 | |
536 | This driver can also be built as a module. If so, the module | |
537 | will be called jc42. | |
538 | ||
502b5a01 GR |
539 | config SENSORS_LINEAGE |
540 | tristate "Lineage Compact Power Line Power Entry Module" | |
e2d8c2b6 | 541 | depends on I2C |
502b5a01 GR |
542 | help |
543 | If you say yes here you get support for the Lineage Compact Power Line | |
544 | series of DC/DC and AC/DC converters such as CP1800, CP2000AC, | |
545 | CP2000DC, CP2725, and others. | |
546 | ||
547 | This driver can also be built as a module. If so, the module | |
548 | will be called lineage-pem. | |
549 | ||
ad2f931d | 550 | config SENSORS_LM63 |
210961c4 | 551 | tristate "National Semiconductor LM63 and compatibles" |
1d72acf9 | 552 | depends on I2C |
ad2f931d | 553 | help |
10f2ed31 | 554 | If you say yes here you get support for the National |
210961c4 | 555 | Semiconductor LM63, LM64, and LM96163 remote diode digital temperature |
10f2ed31 MG |
556 | sensors with integrated fan control. Such chips are found |
557 | on the Tyan S4882 (Thunder K8QS Pro) motherboard, among | |
558 | others. | |
ad2f931d JD |
559 | |
560 | This driver can also be built as a module. If so, the module | |
561 | will be called lm63. | |
562 | ||
e1a8e913 | 563 | config SENSORS_LM70 |
a86e94dc | 564 | tristate "National Semiconductor LM70 and compatibles" |
0b22ce3b | 565 | depends on SPI_MASTER |
e1a8e913 KB |
566 | help |
567 | If you say yes here you get support for the National Semiconductor | |
a86e94dc CL |
568 | LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- |
569 | ture sensor chips. | |
e1a8e913 KB |
570 | |
571 | This driver can also be built as a module. If so, the module | |
572 | will be called lm70. | |
573 | ||
4e233cbe AD |
574 | config SENSORS_LM73 |
575 | tristate "National Semiconductor LM73" | |
576 | depends on I2C | |
577 | help | |
578 | If you say yes here you get support for National Semiconductor LM73 | |
579 | sensor chips. | |
580 | This driver can also be built as a module. If so, the module | |
581 | will be called lm73. | |
582 | ||
ad2f931d JD |
583 | config SENSORS_LM75 |
584 | tristate "National Semiconductor LM75 and compatibles" | |
1d72acf9 | 585 | depends on I2C |
ad2f931d | 586 | help |
01a52397 DB |
587 | If you say yes here you get support for one common type of |
588 | temperature sensor chip, with models including: | |
589 | ||
e96f9d89 | 590 | - Analog Devices ADT75 |
01a52397 DB |
591 | - Dallas Semiconductor DS75 and DS1775 |
592 | - Maxim MAX6625 and MAX6626 | |
593 | - Microchip MCP980x | |
05e82fe4 | 594 | - National Semiconductor LM75, LM75A |
01a52397 DB |
595 | - NXP's LM75A |
596 | - ST Microelectronics STDS75 | |
597 | - TelCom (now Microchip) TCN75 | |
6d034059 SD |
598 | - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, |
599 | TMP275 | |
01a52397 | 600 | |
9ebd3d82 DB |
601 | This driver supports driver model based binding through board |
602 | specific I2C device tables. | |
603 | ||
604 | It also supports the "legacy" style of driver binding. To use | |
605 | that with some chips which don't replicate LM75 quirks exactly, | |
606 | you may need the "force" module parameter. | |
ad2f931d JD |
607 | |
608 | This driver can also be built as a module. If so, the module | |
609 | will be called lm75. | |
610 | ||
611 | config SENSORS_LM77 | |
612 | tristate "National Semiconductor LM77" | |
1d72acf9 | 613 | depends on I2C |
ad2f931d JD |
614 | help |
615 | If you say yes here you get support for National Semiconductor LM77 | |
616 | sensor chips. | |
617 | ||
618 | This driver can also be built as a module. If so, the module | |
619 | will be called lm77. | |
620 | ||
621 | config SENSORS_LM78 | |
622 | tristate "National Semiconductor LM78 and compatibles" | |
1d72acf9 | 623 | depends on I2C |
19f673ed | 624 | select HWMON_VID |
ad2f931d JD |
625 | help |
626 | If you say yes here you get support for National Semiconductor LM78, | |
627 | LM78-J and LM79. | |
628 | ||
629 | This driver can also be built as a module. If so, the module | |
630 | will be called lm78. | |
631 | ||
632 | config SENSORS_LM80 | |
9908ad4c | 633 | tristate "National Semiconductor LM80 and LM96080" |
0b22ce3b | 634 | depends on I2C |
ad2f931d JD |
635 | help |
636 | If you say yes here you get support for National Semiconductor | |
9908ad4c | 637 | LM80 and LM96080 sensor chips. |
ad2f931d JD |
638 | |
639 | This driver can also be built as a module. If so, the module | |
640 | will be called lm80. | |
641 | ||
642 | config SENSORS_LM83 | |
43cb7ebe | 643 | tristate "National Semiconductor LM83 and compatibles" |
1d72acf9 | 644 | depends on I2C |
ad2f931d JD |
645 | help |
646 | If you say yes here you get support for National Semiconductor | |
43cb7ebe | 647 | LM82 and LM83 sensor chips. |
ad2f931d JD |
648 | |
649 | This driver can also be built as a module. If so, the module | |
650 | will be called lm83. | |
651 | ||
652 | config SENSORS_LM85 | |
653 | tristate "National Semiconductor LM85 and compatibles" | |
0b22ce3b | 654 | depends on I2C |
303760b4 | 655 | select HWMON_VID |
ad2f931d JD |
656 | help |
657 | If you say yes here you get support for National Semiconductor LM85 | |
c36364db | 658 | sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, |
f065a93e | 659 | EMC6D101, EMC6D102, and EMC6D103. |
ad2f931d JD |
660 | |
661 | This driver can also be built as a module. If so, the module | |
662 | will be called lm85. | |
663 | ||
664 | config SENSORS_LM87 | |
c7fa3737 | 665 | tristate "National Semiconductor LM87 and compatibles" |
1d72acf9 | 666 | depends on I2C |
303760b4 | 667 | select HWMON_VID |
ad2f931d JD |
668 | help |
669 | If you say yes here you get support for National Semiconductor LM87 | |
c7fa3737 | 670 | and Analog Devices ADM1024 sensor chips. |
ad2f931d JD |
671 | |
672 | This driver can also be built as a module. If so, the module | |
673 | will be called lm87. | |
674 | ||
675 | config SENSORS_LM90 | |
676 | tristate "National Semiconductor LM90 and compatibles" | |
1d72acf9 | 677 | depends on I2C |
ad2f931d JD |
678 | help |
679 | If you say yes here you get support for National Semiconductor LM90, | |
5a4e5e6a GR |
680 | LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, |
681 | Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, | |
682 | MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, | |
ae544f64 GR |
683 | Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 |
684 | sensor chips. | |
ad2f931d JD |
685 | |
686 | This driver can also be built as a module. If so, the module | |
687 | will be called lm90. | |
688 | ||
689 | config SENSORS_LM92 | |
690 | tristate "National Semiconductor LM92 and compatibles" | |
1d72acf9 | 691 | depends on I2C |
ad2f931d JD |
692 | help |
693 | If you say yes here you get support for National Semiconductor LM92 | |
694 | and Maxim MAX6635 sensor chips. | |
695 | ||
696 | This driver can also be built as a module. If so, the module | |
697 | will be called lm92. | |
698 | ||
e46957ed HJK |
699 | config SENSORS_LM93 |
700 | tristate "National Semiconductor LM93 and compatibles" | |
dabf375b | 701 | depends on I2C |
e46957ed HJK |
702 | select HWMON_VID |
703 | help | |
c7bf71c5 GR |
704 | If you say yes here you get support for National Semiconductor LM93, |
705 | LM94, and compatible sensor chips. | |
e46957ed HJK |
706 | |
707 | This driver can also be built as a module. If so, the module | |
708 | will be called lm93. | |
709 | ||
de779015 | 710 | config SENSORS_LTC4151 |
711 | tristate "Linear Technology LTC4151" | |
712 | depends on I2C | |
713 | default n | |
714 | help | |
715 | If you say yes here you get support for Linear Technology LTC4151 | |
716 | High Voltage I2C Current and Voltage Monitor interface. | |
717 | ||
718 | This driver can also be built as a module. If so, the module will | |
719 | be called ltc4151. | |
720 | ||
72f5de92 IS |
721 | config SENSORS_LTC4215 |
722 | tristate "Linear Technology LTC4215" | |
e2d8c2b6 | 723 | depends on I2C |
72f5de92 IS |
724 | default n |
725 | help | |
726 | If you say yes here you get support for Linear Technology LTC4215 | |
727 | Hot Swap Controller I2C interface. | |
728 | ||
729 | This driver can also be built as a module. If so, the module will | |
730 | be called ltc4215. | |
731 | ||
6e34b187 IS |
732 | config SENSORS_LTC4245 |
733 | tristate "Linear Technology LTC4245" | |
e2d8c2b6 | 734 | depends on I2C |
6e34b187 IS |
735 | default n |
736 | help | |
737 | If you say yes here you get support for Linear Technology LTC4245 | |
738 | Multiple Supply Hot Swap Controller I2C interface. | |
739 | ||
740 | This driver can also be built as a module. If so, the module will | |
741 | be called ltc4245. | |
742 | ||
e5f5c99a GR |
743 | config SENSORS_LTC4261 |
744 | tristate "Linear Technology LTC4261" | |
e2d8c2b6 | 745 | depends on I2C |
e5f5c99a GR |
746 | default n |
747 | help | |
748 | If you say yes here you get support for Linear Technology LTC4261 | |
749 | Negative Voltage Hot Swap Controller I2C interface. | |
750 | ||
751 | This driver can also be built as a module. If so, the module will | |
752 | be called ltc4261. | |
753 | ||
06160327 | 754 | config SENSORS_LM95241 |
8c1d0419 | 755 | tristate "National Semiconductor LM95241 and compatibles" |
06160327 DR |
756 | depends on I2C |
757 | help | |
8c1d0419 GR |
758 | If you say yes here you get support for LM95231 and LM95241 sensor |
759 | chips. | |
06160327 DR |
760 | |
761 | This driver can also be built as a module. If so, the module | |
762 | will be called lm95241. | |
763 | ||
fffd80cc AS |
764 | config SENSORS_LM95245 |
765 | tristate "National Semiconductor LM95245 sensor chip" | |
e2d8c2b6 | 766 | depends on I2C |
fffd80cc AS |
767 | help |
768 | If you say yes here you get support for LM95245 sensor chip. | |
769 | ||
770 | This driver can also be built as a module. If so, the module | |
771 | will be called lm95245. | |
772 | ||
55b951e7 | 773 | config SENSORS_MAX1111 |
9224c38a | 774 | tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" |
55b951e7 EM |
775 | depends on SPI_MASTER |
776 | help | |
9224c38a GR |
777 | Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 |
778 | ADC chips. | |
55b951e7 EM |
779 | |
780 | This driver can also be built as a module. If so, the module | |
781 | will be called max1111. | |
782 | ||
f5bae264 GR |
783 | config SENSORS_MAX16065 |
784 | tristate "Maxim MAX16065 System Manager and compatibles" | |
785 | depends on I2C | |
786 | help | |
787 | If you say yes here you get support for hardware monitoring | |
788 | capabilities of the following Maxim System Manager chips. | |
789 | MAX16065 | |
790 | MAX16066 | |
791 | MAX16067 | |
792 | MAX16068 | |
793 | MAX16070 | |
794 | MAX16071 | |
795 | ||
796 | This driver can also be built as a module. If so, the module | |
797 | will be called max16065. | |
798 | ||
ad2f931d JD |
799 | config SENSORS_MAX1619 |
800 | tristate "Maxim MAX1619 sensor chip" | |
1d72acf9 | 801 | depends on I2C |
ad2f931d JD |
802 | help |
803 | If you say yes here you get support for MAX1619 sensor chip. | |
804 | ||
805 | This driver can also be built as a module. If so, the module | |
806 | will be called max1619. | |
807 | ||
731b4cac DG |
808 | config SENSORS_MAX1668 |
809 | tristate "Maxim MAX1668 and compatibles" | |
e2d8c2b6 | 810 | depends on I2C |
731b4cac DG |
811 | help |
812 | If you say yes here you get support for MAX1668, MAX1989 and | |
813 | MAX1805 chips. | |
814 | ||
815 | This driver can also be built as a module. If so, the module | |
816 | will be called max1668. | |
817 | ||
6c1fe725 VD |
818 | config SENSORS_MAX197 |
819 | tristate "Maxim MAX197 and compatibles" | |
820 | help | |
821 | Support for the Maxim MAX197 A/D converter. | |
822 | Support will include, but not be limited to, MAX197, and MAX199. | |
823 | ||
824 | This driver can also be built as a module. If so, the module | |
825 | will be called max197. | |
826 | ||
a5b79d62 | 827 | config SENSORS_MAX6639 |
828 | tristate "Maxim MAX6639 sensor chip" | |
e2d8c2b6 | 829 | depends on I2C |
a5b79d62 | 830 | help |
831 | If you say yes here you get support for the MAX6639 | |
832 | sensor chips. | |
833 | ||
834 | This driver can also be built as a module. If so, the module | |
835 | will be called max6639. | |
836 | ||
83bffbce PD |
837 | config SENSORS_MAX6642 |
838 | tristate "Maxim MAX6642 sensor chip" | |
e2d8c2b6 | 839 | depends on I2C |
83bffbce PD |
840 | help |
841 | If you say yes here you get support for MAX6642 sensor chip. | |
842 | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor | |
843 | with Overtemperature Alarm from Maxim. | |
844 | ||
845 | This driver can also be built as a module. If so, the module | |
846 | will be called max6642. | |
847 | ||
d20620de HJK |
848 | config SENSORS_MAX6650 |
849 | tristate "Maxim MAX6650 sensor chip" | |
e2d8c2b6 | 850 | depends on I2C |
d20620de HJK |
851 | help |
852 | If you say yes here you get support for the MAX6650 / MAX6651 | |
853 | sensor chips. | |
854 | ||
855 | This driver can also be built as a module. If so, the module | |
856 | will be called max6650. | |
857 | ||
5372d2d7 GR |
858 | config SENSORS_MAX6697 |
859 | tristate "Maxim MAX6697 and compatibles" | |
860 | depends on I2C | |
861 | help | |
862 | If you say yes here you get support for MAX6581, MAX6602, MAX6622, | |
863 | MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 | |
864 | temperature sensor chips. | |
865 | ||
866 | This driver can also be built as a module. If so, the module | |
867 | will be called max6697. | |
868 | ||
5510e62a | 869 | config SENSORS_MCP3021 |
592758b1 | 870 | tristate "Microchip MCP3021 and compatibles" |
e2d8c2b6 | 871 | depends on I2C |
5510e62a | 872 | help |
592758b1 SS |
873 | If you say yes here you get support for MCP3021 and MCP3221. |
874 | The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 | |
875 | with 12-bit resolution. | |
5510e62a XX |
876 | |
877 | This driver can also be built as a module. If so, the module | |
878 | will be called mcp3021. | |
879 | ||
f22aaaa7 DK |
880 | config SENSORS_NTC_THERMISTOR |
881 | tristate "NTC thermistor support" | |
f22aaaa7 DK |
882 | help |
883 | This driver supports NTC thermistors sensor reading and its | |
884 | interpretation. The driver can also monitor the temperature and | |
885 | send notifications about the temperature. | |
886 | ||
887 | Currently, this driver supports | |
888 | NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. | |
889 | ||
890 | This driver can also be built as a module. If so, the module | |
891 | will be called ntc-thermistor. | |
892 | ||
ad2f931d JD |
893 | config SENSORS_PC87360 |
894 | tristate "National Semiconductor PC87360 family" | |
746cdfbf | 895 | depends on !PPC |
303760b4 | 896 | select HWMON_VID |
ad2f931d JD |
897 | help |
898 | If you say yes here you get access to the hardware monitoring | |
899 | functions of the National Semiconductor PC8736x Super-I/O chips. | |
900 | The PC87360, PC87363 and PC87364 only have fan monitoring and | |
901 | control. The PC87365 and PC87366 additionally have voltage and | |
902 | temperature monitoring. | |
903 | ||
904 | This driver can also be built as a module. If so, the module | |
905 | will be called pc87360. | |
906 | ||
ba224e2c JD |
907 | config SENSORS_PC87427 |
908 | tristate "National Semiconductor PC87427" | |
746cdfbf | 909 | depends on !PPC |
ba224e2c JD |
910 | help |
911 | If you say yes here you get access to the hardware monitoring | |
912 | functions of the National Semiconductor PC87427 Super-I/O chip. | |
913 | The chip has two distinct logical devices, one for fan speed | |
914 | monitoring and control, and one for voltage and temperature | |
008e5f33 JD |
915 | monitoring. Fan speed monitoring and control are supported, as |
916 | well as temperature monitoring. Voltages aren't supported yet. | |
ba224e2c JD |
917 | |
918 | This driver can also be built as a module. If so, the module | |
919 | will be called pc87427. | |
920 | ||
fb4504fe JD |
921 | config SENSORS_PCF8591 |
922 | tristate "Philips PCF8591 ADC/DAC" | |
923 | depends on I2C | |
924 | default n | |
925 | help | |
926 | If you say yes here you get support for Philips PCF8591 4-channel | |
927 | ADC, 1-channel DAC chips. | |
928 | ||
929 | This driver can also be built as a module. If so, the module | |
930 | will be called pcf8591. | |
931 | ||
932 | These devices are hard to detect and rarely found on mainstream | |
933 | hardware. If unsure, say N. | |
934 | ||
9d2ecfb7 | 935 | source drivers/hwmon/pmbus/Kconfig |
442aba78 | 936 | |
251eb40f JC |
937 | config SENSORS_SHT15 |
938 | tristate "Sensiron humidity and temperature sensors. SHT15 and compat." | |
be45d422 | 939 | depends on GPIOLIB |
251eb40f JC |
940 | help |
941 | If you say yes here you get support for the Sensiron SHT10, SHT11, | |
942 | SHT15, SHT71, SHT75 humidity and temperature sensors. | |
943 | ||
944 | This driver can also be built as a module. If so, the module | |
945 | will be called sht15. | |
946 | ||
430400b8 UF |
947 | config SENSORS_SHT21 |
948 | tristate "Sensiron humidity and temperature sensors. SHT21 and compat." | |
949 | depends on I2C | |
950 | help | |
951 | If you say yes here you get support for the Sensiron SHT21, SHT25 | |
952 | humidity and temperature sensors. | |
953 | ||
954 | This driver can also be built as a module. If so, the module | |
955 | will be called sht21. | |
956 | ||
bff78650 | 957 | config SENSORS_S3C |
62991f7a MC |
958 | tristate "Samsung built-in ADC" |
959 | depends on S3C_ADC | |
bff78650 BD |
960 | help |
961 | If you say yes here you get support for the on-board ADCs of | |
62991f7a | 962 | the Samsung S3C24XX, S3C64XX and other series of SoC |
bff78650 BD |
963 | |
964 | This driver can also be built as a module. If so, the module | |
62991f7a | 965 | will be called s3c-hwmon. |
bff78650 BD |
966 | |
967 | config SENSORS_S3C_RAW | |
968 | bool "Include raw channel attributes in sysfs" | |
969 | depends on SENSORS_S3C | |
970 | help | |
971 | Say Y here if you want to include raw copies of all the ADC | |
972 | channels in sysfs. | |
973 | ||
ad2f931d JD |
974 | config SENSORS_SIS5595 |
975 | tristate "Silicon Integrated Systems Corp. SiS5595" | |
17e7dc43 | 976 | depends on PCI |
ad2f931d JD |
977 | help |
978 | If you say yes here you get support for the integrated sensors in | |
979 | SiS5595 South Bridges. | |
980 | ||
981 | This driver can also be built as a module. If so, the module | |
982 | will be called sis5595. | |
983 | ||
920fa1ff GR |
984 | config SENSORS_SMM665 |
985 | tristate "Summit Microelectronics SMM665" | |
e2d8c2b6 | 986 | depends on I2C |
920fa1ff GR |
987 | default n |
988 | help | |
989 | If you say yes here you get support for the hardware monitoring | |
990 | features of the Summit Microelectronics SMM665/SMM665B Six-Channel | |
991 | Active DC Output Controller / Monitor. | |
992 | ||
993 | Other supported chips are SMM465, SMM665C, SMM764, and SMM766. | |
994 | Support for those chips is untested. | |
995 | ||
996 | This driver can also be built as a module. If so, the module will | |
997 | be called smm665. | |
998 | ||
9431996f | 999 | config SENSORS_DME1737 |
e95c237d | 1000 | tristate "SMSC DME1737, SCH311x and compatibles" |
e2d8c2b6 | 1001 | depends on I2C && !PPC |
9431996f JH |
1002 | select HWMON_VID |
1003 | help | |
1004 | If you say yes here you get support for the hardware monitoring | |
549edb83 JH |
1005 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and |
1006 | Asus A8000 Super-I/O chips. | |
9431996f JH |
1007 | |
1008 | This driver can also be built as a module. If so, the module | |
1009 | will be called dme1737. | |
1010 | ||
dac6831e | 1011 | config SENSORS_EMC1403 |
7a1b76f2 | 1012 | tristate "SMSC EMC1403/23 thermal sensor" |
dac6831e KT |
1013 | depends on I2C |
1014 | help | |
7a1b76f2 | 1015 | If you say yes here you get support for the SMSC EMC1403/23 |
dac6831e KT |
1016 | temperature monitoring chip. |
1017 | ||
1018 | Threshold values can be configured using sysfs. | |
1019 | Data from the different diodes are accessible via sysfs. | |
1020 | ||
9df7305b SG |
1021 | config SENSORS_EMC2103 |
1022 | tristate "SMSC EMC2103" | |
1023 | depends on I2C | |
1024 | help | |
1025 | If you say yes here you get support for the temperature | |
1026 | and fan sensors of the SMSC EMC2103 chips. | |
1027 | ||
1028 | This driver can also be built as a module. If so, the module | |
1029 | will be called emc2103. | |
1030 | ||
b0b349a8 JD |
1031 | config SENSORS_EMC6W201 |
1032 | tristate "SMSC EMC6W201" | |
1033 | depends on I2C | |
1034 | help | |
1035 | If you say yes here you get support for the SMSC EMC6W201 | |
1036 | hardware monitoring chip. | |
1037 | ||
1038 | This driver can also be built as a module. If so, the module | |
1039 | will be called emc6w201. | |
1040 | ||
ad2f931d JD |
1041 | config SENSORS_SMSC47M1 |
1042 | tristate "SMSC LPC47M10x and compatibles" | |
746cdfbf | 1043 | depends on !PPC |
ad2f931d JD |
1044 | help |
1045 | If you say yes here you get support for the integrated fan | |
1046 | monitoring and control capabilities of the SMSC LPC47B27x, | |
6091780e | 1047 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, |
8eccbb6f | 1048 | LPC47M192, LPC47M292 and LPC47M997 chips. |
59ac8367 | 1049 | |
8eccbb6f JD |
1050 | The temperature and voltage sensor features of the LPC47M15x, |
1051 | LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
1052 | driver, select also "SMSC LPC47M192 and compatibles" below for | |
1053 | those. | |
ad2f931d JD |
1054 | |
1055 | This driver can also be built as a module. If so, the module | |
1056 | will be called smsc47m1. | |
1057 | ||
59ac8367 HR |
1058 | config SENSORS_SMSC47M192 |
1059 | tristate "SMSC LPC47M192 and compatibles" | |
0b22ce3b | 1060 | depends on I2C |
59ac8367 HR |
1061 | select HWMON_VID |
1062 | help | |
1063 | If you say yes here you get support for the temperature and | |
00cb4739 JD |
1064 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 |
1065 | and LPC47M997 chips. | |
59ac8367 HR |
1066 | |
1067 | The fan monitoring and control capabilities of these chips | |
1068 | are supported by another driver, select | |
1069 | "SMSC LPC47M10x and compatibles" above. You need both drivers | |
1070 | if you want fan control and voltage/temperature sensor support. | |
1071 | ||
1072 | This driver can also be built as a module. If so, the module | |
1073 | will be called smsc47m192. | |
1074 | ||
ad2f931d JD |
1075 | config SENSORS_SMSC47B397 |
1076 | tristate "SMSC LPC47B397-NC" | |
e2d8c2b6 | 1077 | depends on !PPC |
ad2f931d JD |
1078 | help |
1079 | If you say yes here you get support for the SMSC LPC47B397-NC | |
1080 | sensor chip. | |
1081 | ||
1082 | This driver can also be built as a module. If so, the module | |
1083 | will be called smsc47b397. | |
1084 | ||
28ff2f7a HG |
1085 | config SENSORS_SCH56XX_COMMON |
1086 | tristate | |
1087 | default n | |
1088 | ||
a98d506c HG |
1089 | config SENSORS_SCH5627 |
1090 | tristate "SMSC SCH5627" | |
2d8c7ff5 | 1091 | depends on !PPC && WATCHDOG |
28ff2f7a | 1092 | select SENSORS_SCH56XX_COMMON |
2d8c7ff5 | 1093 | select WATCHDOG_CORE |
a98d506c HG |
1094 | help |
1095 | If you say yes here you get support for the hardware monitoring | |
312869ec HG |
1096 | features of the SMSC SCH5627 Super-I/O chip including support for |
1097 | the integrated watchdog. | |
a98d506c HG |
1098 | |
1099 | This driver can also be built as a module. If so, the module | |
1100 | will be called sch5627. | |
1101 | ||
0772a640 HG |
1102 | config SENSORS_SCH5636 |
1103 | tristate "SMSC SCH5636" | |
2d8c7ff5 | 1104 | depends on !PPC && WATCHDOG |
0772a640 | 1105 | select SENSORS_SCH56XX_COMMON |
2d8c7ff5 | 1106 | select WATCHDOG_CORE |
0772a640 HG |
1107 | help |
1108 | SMSC SCH5636 Super I/O chips include an embedded microcontroller for | |
1109 | hardware monitoring solutions, allowing motherboard manufacturers to | |
1110 | create their own custom hwmon solution based upon the SCH5636. | |
1111 | ||
1112 | Currently this driver only supports the Fujitsu Theseus SCH5636 based | |
1113 | hwmon solution. Say yes here if you want support for the Fujitsu | |
312869ec HG |
1114 | Theseus' hardware monitoring features including support for the |
1115 | integrated watchdog. | |
0772a640 HG |
1116 | |
1117 | This driver can also be built as a module. If so, the module | |
1118 | will be called sch5636. | |
1119 | ||
8c22a8f5 DE |
1120 | config SENSORS_ADS1015 |
1121 | tristate "Texas Instruments ADS1015" | |
1122 | depends on I2C | |
1123 | help | |
1124 | If you say yes here you get support for Texas Instruments ADS1015 | |
1125 | 12-bit 4-input ADC device. | |
1126 | ||
1127 | This driver can also be built as a module. If so, the module | |
1128 | will be called ads1015. | |
1129 | ||
5812f928 | 1130 | config SENSORS_ADS7828 |
0962e0f1 | 1131 | tristate "Texas Instruments ADS7828 and compatibles" |
5812f928 SH |
1132 | depends on I2C |
1133 | help | |
0962e0f1 GR |
1134 | If you say yes here you get support for Texas Instruments ADS7828 and |
1135 | ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while | |
1136 | it is 8-bit on ADS7830. | |
5812f928 SH |
1137 | |
1138 | This driver can also be built as a module. If so, the module | |
1139 | will be called ads7828. | |
1140 | ||
e0c70b80 PT |
1141 | config SENSORS_ADS7871 |
1142 | tristate "Texas Instruments ADS7871 A/D converter" | |
1143 | depends on SPI | |
1144 | help | |
1145 | If you say yes here you get support for TI ADS7871 & ADS7870 | |
1146 | ||
1147 | This driver can also be built as a module. If so, the module | |
1148 | will be called ads7871. | |
1149 | ||
b5430a04 TM |
1150 | config SENSORS_AMC6821 |
1151 | tristate "Texas Instruments AMC6821" | |
e2d8c2b6 | 1152 | depends on I2C |
b5430a04 TM |
1153 | help |
1154 | If you say yes here you get support for the Texas Instruments | |
1155 | AMC6821 hardware monitoring chips. | |
1156 | ||
1157 | This driver can also be build as a module. If so, the module | |
1158 | will be called amc6821. | |
1159 | ||
ceeadc5c GR |
1160 | config SENSORS_INA209 |
1161 | tristate "TI / Burr Brown INA209" | |
1162 | depends on I2C | |
1163 | help | |
1164 | If you say yes here you get support for the TI / Burr Brown INA209 | |
1165 | voltage / current / power monitor I2C interface. | |
1166 | ||
1167 | This driver can also be built as a module. If so, the module will | |
1168 | be called ina209. | |
1169 | ||
f7c2fe38 | 1170 | config SENSORS_INA2XX |
dc92cd0c | 1171 | tristate "Texas Instruments INA219 and compatibles" |
e2d8c2b6 | 1172 | depends on I2C |
f7c2fe38 | 1173 | help |
dc92cd0c GR |
1174 | If you say yes here you get support for INA219, INA220, INA226, and |
1175 | INA230 power monitor chips. | |
f7c2fe38 FL |
1176 | |
1177 | The INA2xx driver is configured for the default configuration of | |
1178 | the part as described in the datasheet. | |
1179 | Default value for Rshunt is 10 mOhms. | |
1180 | This driver can also be built as a module. If so, the module | |
1181 | will be called ina2xx. | |
1182 | ||
add77c64 KH |
1183 | config SENSORS_THMC50 |
1184 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
0b22ce3b | 1185 | depends on I2C |
add77c64 KH |
1186 | help |
1187 | If you say yes here you get support for Texas Instruments THMC50 | |
1188 | sensor chips and clones: the Analog Devices ADM1022. | |
1189 | ||
1190 | This driver can also be built as a module. If so, the module | |
1191 | will be called thmc50. | |
1192 | ||
beb1b6bb | 1193 | config SENSORS_TMP102 |
cff37c9e | 1194 | tristate "Texas Instruments TMP102" |
e2d8c2b6 | 1195 | depends on I2C |
beb1b6bb SK |
1196 | help |
1197 | If you say yes here you get support for Texas Instruments TMP102 | |
1198 | sensor chips. | |
1199 | ||
1200 | This driver can also be built as a module. If so, the module | |
1201 | will be called tmp102. | |
1202 | ||
ab2b79d5 HG |
1203 | config SENSORS_TMP401 |
1204 | tristate "Texas Instruments TMP401 and compatibles" | |
e2d8c2b6 | 1205 | depends on I2C |
ab2b79d5 HG |
1206 | help |
1207 | If you say yes here you get support for Texas Instruments TMP401 and | |
1208 | TMP411 temperature sensor chips. | |
1209 | ||
1210 | This driver can also be built as a module. If so, the module | |
1211 | will be called tmp401. | |
1212 | ||
9410700b AP |
1213 | config SENSORS_TMP421 |
1214 | tristate "Texas Instruments TMP421 and compatible" | |
e2d8c2b6 | 1215 | depends on I2C |
9410700b AP |
1216 | help |
1217 | If you say yes here you get support for Texas Instruments TMP421, | |
1218 | TMP422 and TMP423 temperature sensor chips. | |
1219 | ||
1220 | This driver can also be built as a module. If so, the module | |
1221 | will be called tmp421. | |
1222 | ||
0070bddf K |
1223 | config SENSORS_TWL4030_MADC |
1224 | tristate "Texas Instruments TWL4030 MADC Hwmon" | |
1225 | depends on TWL4030_MADC | |
1226 | help | |
1227 | If you say yes here you get hwmon support for triton | |
1228 | TWL4030-MADC. | |
1229 | ||
1230 | This driver can also be built as a module. If so it will be called | |
1231 | twl4030-madc-hwmon. | |
1232 | ||
48ed8877 PM |
1233 | config SENSORS_VEXPRESS |
1234 | tristate "Versatile Express" | |
1235 | depends on VEXPRESS_CONFIG | |
1236 | help | |
1237 | This driver provides support for hardware sensors available on | |
1238 | the ARM Ltd's Versatile Express platform. It can provide wide | |
1239 | range of information like temperature, power, energy. | |
1240 | ||
70c38772 HW |
1241 | config SENSORS_VIA_CPUTEMP |
1242 | tristate "VIA CPU temperature sensor" | |
1243 | depends on X86 | |
764e043b | 1244 | select HWMON_VID |
70c38772 HW |
1245 | help |
1246 | If you say yes here you get support for the temperature | |
1247 | sensor inside your CPU. Supported are all known variants of | |
1248 | the VIA C7 and Nano. | |
1249 | ||
ad2f931d JD |
1250 | config SENSORS_VIA686A |
1251 | tristate "VIA686A" | |
2ec342e6 | 1252 | depends on PCI |
ad2f931d JD |
1253 | help |
1254 | If you say yes here you get support for the integrated sensors in | |
1255 | Via 686A/B South Bridges. | |
1256 | ||
1257 | This driver can also be built as a module. If so, the module | |
1258 | will be called via686a. | |
1259 | ||
ab41319e JH |
1260 | config SENSORS_VT1211 |
1261 | tristate "VIA VT1211" | |
746cdfbf | 1262 | depends on !PPC |
ab41319e JH |
1263 | select HWMON_VID |
1264 | help | |
1265 | If you say yes here then you get support for hardware monitoring | |
1266 | features of the VIA VT1211 Super-I/O chip. | |
1267 | ||
1268 | This driver can also be built as a module. If so, the module | |
1269 | will be called vt1211. | |
1270 | ||
1de9e371 | 1271 | config SENSORS_VT8231 |
51bd5633 | 1272 | tristate "VIA VT8231" |
ec5e1a4b | 1273 | depends on PCI |
1de9e371 | 1274 | select HWMON_VID |
1de9e371 RL |
1275 | help |
1276 | If you say yes here then you get support for the integrated sensors | |
1277 | in the VIA VT8231 device. | |
1278 | ||
1279 | This driver can also be built as a module. If so, the module | |
1280 | will be called vt8231. | |
1281 | ||
ad2f931d | 1282 | config SENSORS_W83781D |
05663368 | 1283 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" |
1d72acf9 | 1284 | depends on I2C |
303760b4 | 1285 | select HWMON_VID |
ad2f931d JD |
1286 | help |
1287 | If you say yes here you get support for the Winbond W8378x series | |
05663368 JD |
1288 | of sensor chips: the W83781D, W83782D and W83783S, and the similar |
1289 | Asus AS99127F. | |
ad2f931d JD |
1290 | |
1291 | This driver can also be built as a module. If so, the module | |
1292 | will be called w83781d. | |
1293 | ||
9873964d CS |
1294 | config SENSORS_W83791D |
1295 | tristate "Winbond W83791D" | |
d1ebd59a | 1296 | depends on I2C |
9873964d CS |
1297 | select HWMON_VID |
1298 | help | |
1299 | If you say yes here you get support for the Winbond W83791D chip. | |
1300 | ||
1301 | This driver can also be built as a module. If so, the module | |
1302 | will be called w83791d. | |
1303 | ||
5563e27d M |
1304 | config SENSORS_W83792D |
1305 | tristate "Winbond W83792D" | |
0b22ce3b | 1306 | depends on I2C |
5563e27d M |
1307 | help |
1308 | If you say yes here you get support for the Winbond W83792D chip. | |
1309 | ||
1310 | This driver can also be built as a module. If so, the module | |
1311 | will be called w83792d. | |
1312 | ||
6800c3d0 RM |
1313 | config SENSORS_W83793 |
1314 | tristate "Winbond W83793" | |
e2d8c2b6 | 1315 | depends on I2C |
7a5e6bc2 | 1316 | select HWMON_VID |
6800c3d0 RM |
1317 | help |
1318 | If you say yes here you get support for the Winbond W83793 | |
5852f960 SA |
1319 | hardware monitoring chip, including support for the integrated |
1320 | watchdog. | |
6800c3d0 RM |
1321 | |
1322 | This driver can also be built as a module. If so, the module | |
1323 | will be called w83793. | |
1324 | ||
792d376b WS |
1325 | config SENSORS_W83795 |
1326 | tristate "Winbond/Nuvoton W83795G/ADG" | |
e2d8c2b6 | 1327 | depends on I2C |
792d376b WS |
1328 | help |
1329 | If you say yes here you get support for the Winbond W83795G and | |
72fea694 JD |
1330 | W83795ADG hardware monitoring chip, including manual fan speed |
1331 | control. | |
792d376b WS |
1332 | |
1333 | This driver can also be built as a module. If so, the module | |
1334 | will be called w83795. | |
1335 | ||
00030af2 | 1336 | config SENSORS_W83795_FANCTRL |
72fea694 | 1337 | boolean "Include automatic fan control support (DANGEROUS)" |
e2d8c2b6 | 1338 | depends on SENSORS_W83795 |
00030af2 JD |
1339 | default n |
1340 | help | |
72fea694 JD |
1341 | If you say yes here, support for automatic fan speed control |
1342 | will be included in the driver. | |
00030af2 JD |
1343 | |
1344 | This part of the code wasn't carefully reviewed and tested yet, | |
1345 | so enabling this option is strongly discouraged on production | |
1346 | servers. Only developers and testers should enable it for the | |
1347 | time being. | |
1348 | ||
1349 | Please also note that this option will create sysfs attribute | |
1350 | files which may change in the future, so you shouldn't rely | |
1351 | on them being stable. | |
1352 | ||
ad2f931d JD |
1353 | config SENSORS_W83L785TS |
1354 | tristate "Winbond W83L785TS-S" | |
e2d8c2b6 | 1355 | depends on I2C |
ad2f931d JD |
1356 | help |
1357 | If you say yes here you get support for the Winbond W83L785TS-S | |
1358 | sensor chip, which is used on the Asus A7N8X, among other | |
1359 | motherboards. | |
1360 | ||
1361 | This driver can also be built as a module. If so, the module | |
1362 | will be called w83l785ts. | |
1363 | ||
85f03bcc KL |
1364 | config SENSORS_W83L786NG |
1365 | tristate "Winbond W83L786NG, W83L786NR" | |
e2d8c2b6 | 1366 | depends on I2C |
85f03bcc KL |
1367 | help |
1368 | If you say yes here you get support for the Winbond W83L786NG | |
1369 | and W83L786NR sensor chips. | |
1370 | ||
1371 | This driver can also be built as a module. If so, the module | |
1372 | will be called w83l786ng. | |
1373 | ||
ad2f931d | 1374 | config SENSORS_W83627HF |
c2db6ce1 | 1375 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" |
746cdfbf | 1376 | depends on !PPC |
303760b4 | 1377 | select HWMON_VID |
ad2f931d JD |
1378 | help |
1379 | If you say yes here you get support for the Winbond W836X7 series | |
c2db6ce1 JD |
1380 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and |
1381 | W83697HF. | |
ad2f931d JD |
1382 | |
1383 | This driver can also be built as a module. If so, the module | |
1384 | will be called w83627hf. | |
1385 | ||
1386 | config SENSORS_W83627EHF | |
eff7687d | 1387 | tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" |
746cdfbf | 1388 | depends on !PPC |
fc18d6c0 | 1389 | select HWMON_VID |
ad2f931d | 1390 | help |
658291fc | 1391 | If you say yes here you get support for the hardware |
ad2f931d | 1392 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. |
ad2f931d | 1393 | |
8dd2d2ca | 1394 | This driver also supports the W83627EHG, which is the lead-free |
658291fc DH |
1395 | version of the W83627EHF, and the W83627DHG, which is a similar |
1396 | chip suited for specific Intel processors that use PECI such as | |
eff7687d JD |
1397 | the Core 2 Duo. And also the W83627UHG, which is a stripped down |
1398 | version of the W83627DHG (as far as hardware monitoring goes.) | |
8dd2d2ca | 1399 | |
2dd59c26 GR |
1400 | This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F |
1401 | (also known as W83667HG-I), and NCT6776F. | |
237c8d2f | 1402 | |
ad2f931d JD |
1403 | This driver can also be built as a module. If so, the module |
1404 | will be called w83627ehf. | |
1405 | ||
08bad5a8 MB |
1406 | config SENSORS_WM831X |
1407 | tristate "WM831x PMICs" | |
1408 | depends on MFD_WM831X | |
1409 | help | |
1410 | If you say yes here you get support for the hardware | |
1411 | monitoring functionality of the Wolfson Microelectronics | |
1412 | WM831x series of PMICs. | |
1413 | ||
1414 | This driver can also be built as a module. If so, the module | |
1415 | will be called wm831x-hwmon. | |
1416 | ||
fb6c023a MB |
1417 | config SENSORS_WM8350 |
1418 | tristate "Wolfson Microelectronics WM835x" | |
1419 | depends on MFD_WM8350 | |
1420 | help | |
1421 | If you say yes here you get support for the hardware | |
1422 | monitoring features of the WM835x series of PMICs. | |
1423 | ||
1424 | This driver can also be built as a module. If so, the module | |
1425 | will be called wm8350-hwmon. | |
ad2f931d | 1426 | |
e0418088 DM |
1427 | config SENSORS_ULTRA45 |
1428 | tristate "Sun Ultra45 PIC16F747" | |
1429 | depends on SPARC64 | |
1430 | help | |
1431 | This driver provides support for the Ultra45 workstation environmental | |
1432 | sensors. | |
1433 | ||
6f2fad74 NB |
1434 | config SENSORS_APPLESMC |
1435 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
548c343b | 1436 | depends on INPUT && X86 |
6f2fad74 NB |
1437 | select NEW_LEDS |
1438 | select LEDS_CLASS | |
d5cf2b99 | 1439 | select INPUT_POLLDEV |
6f2fad74 NB |
1440 | default n |
1441 | help | |
1442 | This driver provides support for the Apple System Management | |
1443 | Controller, which provides an accelerometer (Apple Sudden Motion | |
1444 | Sensor), light sensors, temperature sensors, keyboard backlight | |
1445 | control and fan control. | |
1446 | ||
1447 | Only Intel-based Apple's computers are supported (MacBook Pro, | |
1448 | MacBook, MacMini). | |
1449 | ||
1450 | Data from the different sensors, keyboard backlight control and fan | |
1451 | control are accessible via sysfs. | |
1452 | ||
1453 | This driver also provides an absolute input class device, allowing | |
1454 | the laptop to act as a pinball machine-esque joystick. | |
1455 | ||
1456 | Say Y here if you have an applicable laptop and want to experience | |
1457 | the awesome power of applesmc. | |
1458 | ||
93ee0a75 | 1459 | config SENSORS_MC13783_ADC |
0c273215 UKK |
1460 | tristate "Freescale MC13783/MC13892 ADC" |
1461 | depends on MFD_MC13XXX | |
93ee0a75 | 1462 | help |
0c273215 | 1463 | Support for the A/D converter on MC13783 and MC13892 PMIC. |
93ee0a75 | 1464 | |
61cba5c2 JD |
1465 | if ACPI |
1466 | ||
1467 | comment "ACPI drivers" | |
1468 | ||
7d033365 JD |
1469 | config SENSORS_ACPI_POWER |
1470 | tristate "ACPI 4.0 power meter" | |
1471 | help | |
1472 | This driver exposes ACPI 4.0 power meters as hardware monitoring | |
1473 | devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware | |
1474 | and a power meter. | |
1475 | ||
1476 | To compile this driver as a module, choose M here: | |
1477 | the module will be called acpi_power_meter. | |
1478 | ||
61cba5c2 JD |
1479 | config SENSORS_ATK0110 |
1480 | tristate "ASUS ATK0110" | |
e2d8c2b6 | 1481 | depends on X86 |
61cba5c2 JD |
1482 | help |
1483 | If you say yes here you get support for the ACPI hardware | |
1484 | monitoring interface found in many ASUS motherboards. This | |
1485 | driver will provide readings of fans, voltages and temperatures | |
1486 | through the system firmware. | |
1487 | ||
1488 | This driver can also be built as a module. If so, the module | |
1489 | will be called asus_atk0110. | |
1490 | ||
61cba5c2 | 1491 | endif # ACPI |
ad2f931d | 1492 | |
1d72acf9 | 1493 | endif # HWMON |