Commit | Line | Data |
---|---|---|
9fb6bf02 BT |
1 | /* |
2 | * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com> | |
3 | * Copyright (c) 2013 Synaptics Incorporated | |
4 | * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com> | |
5 | * Copyright (c) 2014 Red Hat, Inc | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify it | |
8 | * under the terms of the GNU General Public License as published by the Free | |
9 | * Software Foundation; either version 2 of the License, or (at your option) | |
10 | * any later version. | |
11 | */ | |
12 | ||
13 | #include <linux/kernel.h> | |
14 | #include <linux/hid.h> | |
15 | #include <linux/input.h> | |
16 | #include <linux/input/mt.h> | |
17 | #include <linux/module.h> | |
18 | #include <linux/pm.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/wait.h> | |
21 | #include <linux/sched.h> | |
22 | #include "hid-ids.h" | |
23 | ||
24 | #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ | |
25 | #define RMI_WRITE_REPORT_ID 0x09 /* Output Report */ | |
26 | #define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */ | |
27 | #define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */ | |
28 | #define RMI_ATTN_REPORT_ID 0x0c /* Input Report */ | |
29 | #define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */ | |
30 | ||
31 | /* flags */ | |
32 | #define RMI_READ_REQUEST_PENDING BIT(0) | |
33 | #define RMI_READ_DATA_PENDING BIT(1) | |
34 | #define RMI_STARTED BIT(2) | |
35 | ||
2f43de60 AD |
36 | /* device flags */ |
37 | #define RMI_DEVICE BIT(0) | |
79364d87 | 38 | #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) |
2f43de60 | 39 | |
9fb6bf02 BT |
40 | enum rmi_mode_type { |
41 | RMI_MODE_OFF = 0, | |
42 | RMI_MODE_ATTN_REPORTS = 1, | |
43 | RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, | |
44 | }; | |
45 | ||
46 | struct rmi_function { | |
47 | unsigned page; /* page of the function */ | |
48 | u16 query_base_addr; /* base address for queries */ | |
49 | u16 command_base_addr; /* base address for commands */ | |
50 | u16 control_base_addr; /* base address for controls */ | |
51 | u16 data_base_addr; /* base address for datas */ | |
52 | unsigned int interrupt_base; /* cross-function interrupt number | |
53 | * (uniq in the device)*/ | |
54 | unsigned int interrupt_count; /* number of interrupts */ | |
55 | unsigned int report_size; /* size of a report */ | |
56 | unsigned long irq_mask; /* mask of the interrupts | |
57 | * (to be applied against ATTN IRQ) */ | |
58 | }; | |
59 | ||
60 | /** | |
61 | * struct rmi_data - stores information for hid communication | |
62 | * | |
63 | * @page_mutex: Locks current page to avoid changing pages in unexpected ways. | |
64 | * @page: Keeps track of the current virtual page | |
65 | * | |
66 | * @wait: Used for waiting for read data | |
67 | * | |
68 | * @writeReport: output buffer when writing RMI registers | |
69 | * @readReport: input buffer when reading RMI registers | |
70 | * | |
71 | * @input_report_size: size of an input report (advertised by HID) | |
72 | * @output_report_size: size of an output report (advertised by HID) | |
73 | * | |
74 | * @flags: flags for the current device (started, reading, etc...) | |
75 | * | |
76 | * @f11: placeholder of internal RMI function F11 description | |
77 | * @f30: placeholder of internal RMI function F30 description | |
78 | * | |
79 | * @max_fingers: maximum finger count reported by the device | |
80 | * @max_x: maximum x value reported by the device | |
81 | * @max_y: maximum y value reported by the device | |
82 | * | |
83 | * @gpio_led_count: count of GPIOs + LEDs reported by F30 | |
84 | * @button_count: actual physical buttons count | |
85 | * @button_mask: button mask used to decode GPIO ATTN reports | |
86 | * @button_state_mask: pull state of the buttons | |
87 | * | |
88 | * @input: pointer to the kernel input device | |
89 | * | |
90 | * @reset_work: worker which will be called in case of a mouse report | |
91 | * @hdev: pointer to the struct hid_device | |
92 | */ | |
93 | struct rmi_data { | |
94 | struct mutex page_mutex; | |
95 | int page; | |
96 | ||
97 | wait_queue_head_t wait; | |
98 | ||
99 | u8 *writeReport; | |
100 | u8 *readReport; | |
101 | ||
102 | int input_report_size; | |
103 | int output_report_size; | |
104 | ||
105 | unsigned long flags; | |
106 | ||
107 | struct rmi_function f11; | |
108 | struct rmi_function f30; | |
109 | ||
110 | unsigned int max_fingers; | |
111 | unsigned int max_x; | |
112 | unsigned int max_y; | |
113 | unsigned int x_size_mm; | |
114 | unsigned int y_size_mm; | |
115 | ||
116 | unsigned int gpio_led_count; | |
117 | unsigned int button_count; | |
118 | unsigned long button_mask; | |
119 | unsigned long button_state_mask; | |
120 | ||
121 | struct input_dev *input; | |
122 | ||
123 | struct work_struct reset_work; | |
124 | struct hid_device *hdev; | |
2f43de60 AD |
125 | |
126 | unsigned long device_flags; | |
9fb6bf02 BT |
127 | }; |
128 | ||
129 | #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) | |
130 | ||
131 | static int rmi_write_report(struct hid_device *hdev, u8 *report, int len); | |
132 | ||
133 | /** | |
134 | * rmi_set_page - Set RMI page | |
135 | * @hdev: The pointer to the hid_device struct | |
136 | * @page: The new page address. | |
137 | * | |
138 | * RMI devices have 16-bit addressing, but some of the physical | |
139 | * implementations (like SMBus) only have 8-bit addressing. So RMI implements | |
140 | * a page address at 0xff of every page so we can reliable page addresses | |
141 | * every 256 registers. | |
142 | * | |
143 | * The page_mutex lock must be held when this function is entered. | |
144 | * | |
145 | * Returns zero on success, non-zero on failure. | |
146 | */ | |
147 | static int rmi_set_page(struct hid_device *hdev, u8 page) | |
148 | { | |
149 | struct rmi_data *data = hid_get_drvdata(hdev); | |
150 | int retval; | |
151 | ||
152 | data->writeReport[0] = RMI_WRITE_REPORT_ID; | |
153 | data->writeReport[1] = 1; | |
154 | data->writeReport[2] = 0xFF; | |
155 | data->writeReport[4] = page; | |
156 | ||
157 | retval = rmi_write_report(hdev, data->writeReport, | |
158 | data->output_report_size); | |
159 | if (retval != data->output_report_size) { | |
160 | dev_err(&hdev->dev, | |
161 | "%s: set page failed: %d.", __func__, retval); | |
162 | return retval; | |
163 | } | |
164 | ||
165 | data->page = page; | |
166 | return 0; | |
167 | } | |
168 | ||
169 | static int rmi_set_mode(struct hid_device *hdev, u8 mode) | |
170 | { | |
171 | int ret; | |
172 | u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode}; | |
173 | ||
174 | ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf, | |
175 | sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT); | |
176 | if (ret < 0) { | |
177 | dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode, | |
178 | ret); | |
179 | return ret; | |
180 | } | |
181 | ||
182 | return 0; | |
183 | } | |
184 | ||
185 | static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) | |
186 | { | |
187 | int ret; | |
188 | ||
189 | ret = hid_hw_output_report(hdev, (void *)report, len); | |
190 | if (ret < 0) { | |
191 | dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret); | |
192 | return ret; | |
193 | } | |
194 | ||
195 | return ret; | |
196 | } | |
197 | ||
198 | static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, | |
199 | const int len) | |
200 | { | |
201 | struct rmi_data *data = hid_get_drvdata(hdev); | |
202 | int ret; | |
203 | int bytes_read; | |
204 | int bytes_needed; | |
205 | int retries; | |
206 | int read_input_count; | |
207 | ||
208 | mutex_lock(&data->page_mutex); | |
209 | ||
210 | if (RMI_PAGE(addr) != data->page) { | |
211 | ret = rmi_set_page(hdev, RMI_PAGE(addr)); | |
212 | if (ret < 0) | |
213 | goto exit; | |
214 | } | |
215 | ||
216 | for (retries = 5; retries > 0; retries--) { | |
217 | data->writeReport[0] = RMI_READ_ADDR_REPORT_ID; | |
218 | data->writeReport[1] = 0; /* old 1 byte read count */ | |
219 | data->writeReport[2] = addr & 0xFF; | |
220 | data->writeReport[3] = (addr >> 8) & 0xFF; | |
221 | data->writeReport[4] = len & 0xFF; | |
222 | data->writeReport[5] = (len >> 8) & 0xFF; | |
223 | ||
224 | set_bit(RMI_READ_REQUEST_PENDING, &data->flags); | |
225 | ||
226 | ret = rmi_write_report(hdev, data->writeReport, | |
227 | data->output_report_size); | |
228 | if (ret != data->output_report_size) { | |
229 | clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); | |
230 | dev_err(&hdev->dev, | |
231 | "failed to write request output report (%d)\n", | |
232 | ret); | |
233 | goto exit; | |
234 | } | |
235 | ||
236 | bytes_read = 0; | |
237 | bytes_needed = len; | |
238 | while (bytes_read < len) { | |
239 | if (!wait_event_timeout(data->wait, | |
240 | test_bit(RMI_READ_DATA_PENDING, &data->flags), | |
241 | msecs_to_jiffies(1000))) { | |
242 | hid_warn(hdev, "%s: timeout elapsed\n", | |
243 | __func__); | |
244 | ret = -EAGAIN; | |
245 | break; | |
246 | } | |
247 | ||
248 | read_input_count = data->readReport[1]; | |
249 | memcpy(buf + bytes_read, &data->readReport[2], | |
250 | read_input_count < bytes_needed ? | |
251 | read_input_count : bytes_needed); | |
252 | ||
253 | bytes_read += read_input_count; | |
254 | bytes_needed -= read_input_count; | |
255 | clear_bit(RMI_READ_DATA_PENDING, &data->flags); | |
256 | } | |
257 | ||
258 | if (ret >= 0) { | |
259 | ret = 0; | |
260 | break; | |
261 | } | |
262 | } | |
263 | ||
264 | exit: | |
265 | clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); | |
266 | mutex_unlock(&data->page_mutex); | |
267 | return ret; | |
268 | } | |
269 | ||
270 | static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) | |
271 | { | |
272 | return rmi_read_block(hdev, addr, buf, 1); | |
273 | } | |
274 | ||
275 | static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, | |
276 | u8 finger_state, u8 *touch_data) | |
277 | { | |
278 | int x, y, wx, wy; | |
279 | int wide, major, minor; | |
280 | int z; | |
281 | ||
282 | input_mt_slot(hdata->input, slot); | |
283 | input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, | |
284 | finger_state == 0x01); | |
285 | if (finger_state == 0x01) { | |
876e7a8a | 286 | x = (touch_data[0] << 4) | (touch_data[2] & 0x0F); |
9fb6bf02 | 287 | y = (touch_data[1] << 4) | (touch_data[2] >> 4); |
876e7a8a | 288 | wx = touch_data[3] & 0x0F; |
9fb6bf02 BT |
289 | wy = touch_data[3] >> 4; |
290 | wide = (wx > wy); | |
291 | major = max(wx, wy); | |
292 | minor = min(wx, wy); | |
293 | z = touch_data[4]; | |
294 | ||
295 | /* y is inverted */ | |
296 | y = hdata->max_y - y; | |
297 | ||
298 | input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); | |
299 | input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); | |
300 | input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); | |
301 | input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); | |
302 | input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); | |
303 | input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); | |
304 | } | |
305 | } | |
306 | ||
307 | static void rmi_reset_work(struct work_struct *work) | |
308 | { | |
309 | struct rmi_data *hdata = container_of(work, struct rmi_data, | |
310 | reset_work); | |
311 | ||
312 | /* switch the device to RMI if we receive a generic mouse report */ | |
313 | rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS); | |
314 | } | |
315 | ||
316 | static inline int rmi_schedule_reset(struct hid_device *hdev) | |
317 | { | |
318 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
319 | return schedule_work(&hdata->reset_work); | |
320 | } | |
321 | ||
322 | static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, | |
323 | int size) | |
324 | { | |
325 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
326 | int offset; | |
327 | int i; | |
328 | ||
5b65c2a0 | 329 | if (!(irq & hdata->f11.irq_mask) || size <= 0) |
9fb6bf02 BT |
330 | return 0; |
331 | ||
332 | offset = (hdata->max_fingers >> 2) + 1; | |
333 | for (i = 0; i < hdata->max_fingers; i++) { | |
334 | int fs_byte_position = i >> 2; | |
335 | int fs_bit_position = (i & 0x3) << 1; | |
336 | int finger_state = (data[fs_byte_position] >> fs_bit_position) & | |
337 | 0x03; | |
5b65c2a0 BT |
338 | int position = offset + 5 * i; |
339 | ||
340 | if (position + 5 > size) { | |
341 | /* partial report, go on with what we received */ | |
342 | printk_once(KERN_WARNING | |
343 | "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n", | |
344 | dev_driver_string(&hdev->dev), | |
345 | dev_name(&hdev->dev)); | |
346 | hid_dbg(hdev, "Incomplete finger report\n"); | |
347 | break; | |
348 | } | |
9fb6bf02 | 349 | |
5b65c2a0 | 350 | rmi_f11_process_touch(hdata, i, finger_state, &data[position]); |
9fb6bf02 BT |
351 | } |
352 | input_mt_sync_frame(hdata->input); | |
353 | input_sync(hdata->input); | |
354 | return hdata->f11.report_size; | |
355 | } | |
356 | ||
357 | static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, | |
358 | int size) | |
359 | { | |
360 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
361 | int i; | |
362 | int button = 0; | |
363 | bool value; | |
364 | ||
365 | if (!(irq & hdata->f30.irq_mask)) | |
366 | return 0; | |
367 | ||
5b65c2a0 BT |
368 | if (size < (int)hdata->f30.report_size) { |
369 | hid_warn(hdev, "Click Button pressed, but the click data is missing\n"); | |
370 | return 0; | |
371 | } | |
372 | ||
9fb6bf02 BT |
373 | for (i = 0; i < hdata->gpio_led_count; i++) { |
374 | if (test_bit(i, &hdata->button_mask)) { | |
375 | value = (data[i / 8] >> (i & 0x07)) & BIT(0); | |
376 | if (test_bit(i, &hdata->button_state_mask)) | |
377 | value = !value; | |
378 | input_event(hdata->input, EV_KEY, BTN_LEFT + button++, | |
379 | value); | |
380 | } | |
381 | } | |
382 | return hdata->f30.report_size; | |
383 | } | |
384 | ||
385 | static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) | |
386 | { | |
387 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
388 | unsigned long irq_mask = 0; | |
389 | unsigned index = 2; | |
390 | ||
391 | if (!(test_bit(RMI_STARTED, &hdata->flags))) | |
392 | return 0; | |
393 | ||
394 | irq_mask |= hdata->f11.irq_mask; | |
395 | irq_mask |= hdata->f30.irq_mask; | |
396 | ||
397 | if (data[1] & ~irq_mask) | |
01a5f8a4 | 398 | hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n", |
9fb6bf02 BT |
399 | data[1] & ~irq_mask, __FILE__, __LINE__); |
400 | ||
401 | if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { | |
402 | index += rmi_f11_input_event(hdev, data[1], &data[index], | |
403 | size - index); | |
404 | index += rmi_f30_input_event(hdev, data[1], &data[index], | |
405 | size - index); | |
406 | } else { | |
407 | index += rmi_f30_input_event(hdev, data[1], &data[index], | |
408 | size - index); | |
409 | index += rmi_f11_input_event(hdev, data[1], &data[index], | |
410 | size - index); | |
411 | } | |
412 | ||
413 | return 1; | |
414 | } | |
415 | ||
416 | static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size) | |
417 | { | |
418 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
419 | ||
420 | if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) { | |
01a5f8a4 | 421 | hid_dbg(hdev, "no read request pending\n"); |
9fb6bf02 BT |
422 | return 0; |
423 | } | |
424 | ||
425 | memcpy(hdata->readReport, data, size < hdata->input_report_size ? | |
426 | size : hdata->input_report_size); | |
427 | set_bit(RMI_READ_DATA_PENDING, &hdata->flags); | |
428 | wake_up(&hdata->wait); | |
429 | ||
430 | return 1; | |
431 | } | |
432 | ||
5b65c2a0 BT |
433 | static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size) |
434 | { | |
435 | int valid_size = size; | |
436 | /* | |
437 | * On the Dell XPS 13 9333, the bus sometimes get confused and fills | |
438 | * the report with a sentinel value "ff". Synaptics told us that such | |
439 | * behavior does not comes from the touchpad itself, so we filter out | |
440 | * such reports here. | |
441 | */ | |
442 | ||
443 | while ((data[valid_size - 1] == 0xff) && valid_size > 0) | |
444 | valid_size--; | |
445 | ||
446 | return valid_size; | |
447 | } | |
448 | ||
9fb6bf02 BT |
449 | static int rmi_raw_event(struct hid_device *hdev, |
450 | struct hid_report *report, u8 *data, int size) | |
451 | { | |
5b65c2a0 BT |
452 | size = rmi_check_sanity(hdev, data, size); |
453 | if (size < 2) | |
454 | return 0; | |
455 | ||
9fb6bf02 BT |
456 | switch (data[0]) { |
457 | case RMI_READ_DATA_REPORT_ID: | |
458 | return rmi_read_data_event(hdev, data, size); | |
459 | case RMI_ATTN_REPORT_ID: | |
460 | return rmi_input_event(hdev, data, size); | |
2f43de60 AD |
461 | default: |
462 | return 1; | |
463 | } | |
464 | ||
465 | return 0; | |
466 | } | |
467 | ||
468 | static int rmi_event(struct hid_device *hdev, struct hid_field *field, | |
469 | struct hid_usage *usage, __s32 value) | |
470 | { | |
471 | struct rmi_data *data = hid_get_drvdata(hdev); | |
472 | ||
473 | if ((data->device_flags & RMI_DEVICE) && | |
474 | (field->application == HID_GD_POINTER || | |
475 | field->application == HID_GD_MOUSE)) { | |
79364d87 AD |
476 | if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) { |
477 | if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) | |
478 | return 0; | |
479 | ||
480 | if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y) | |
481 | && !value) | |
482 | return 1; | |
483 | } | |
484 | ||
9fb6bf02 | 485 | rmi_schedule_reset(hdev); |
2f43de60 | 486 | return 1; |
9fb6bf02 BT |
487 | } |
488 | ||
489 | return 0; | |
490 | } | |
491 | ||
a278e268 | 492 | #ifdef CONFIG_PM |
9fb6bf02 BT |
493 | static int rmi_post_reset(struct hid_device *hdev) |
494 | { | |
495 | return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); | |
496 | } | |
497 | ||
498 | static int rmi_post_resume(struct hid_device *hdev) | |
499 | { | |
500 | return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); | |
501 | } | |
a278e268 | 502 | #endif /* CONFIG_PM */ |
9fb6bf02 BT |
503 | |
504 | #define RMI4_MAX_PAGE 0xff | |
505 | #define RMI4_PAGE_SIZE 0x0100 | |
506 | ||
507 | #define PDT_START_SCAN_LOCATION 0x00e9 | |
508 | #define PDT_END_SCAN_LOCATION 0x0005 | |
509 | #define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) | |
510 | ||
511 | struct pdt_entry { | |
512 | u8 query_base_addr:8; | |
513 | u8 command_base_addr:8; | |
514 | u8 control_base_addr:8; | |
515 | u8 data_base_addr:8; | |
516 | u8 interrupt_source_count:3; | |
517 | u8 bits3and4:2; | |
518 | u8 function_version:2; | |
519 | u8 bit7:1; | |
520 | u8 function_number:8; | |
521 | } __attribute__((__packed__)); | |
522 | ||
523 | static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) | |
524 | { | |
525 | return GENMASK(irq_count + irq_base - 1, irq_base); | |
526 | } | |
527 | ||
528 | static void rmi_register_function(struct rmi_data *data, | |
529 | struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) | |
530 | { | |
531 | struct rmi_function *f = NULL; | |
532 | u16 page_base = page << 8; | |
533 | ||
534 | switch (pdt_entry->function_number) { | |
535 | case 0x11: | |
536 | f = &data->f11; | |
537 | break; | |
538 | case 0x30: | |
539 | f = &data->f30; | |
540 | break; | |
541 | } | |
542 | ||
543 | if (f) { | |
544 | f->page = page; | |
545 | f->query_base_addr = page_base | pdt_entry->query_base_addr; | |
546 | f->command_base_addr = page_base | pdt_entry->command_base_addr; | |
547 | f->control_base_addr = page_base | pdt_entry->control_base_addr; | |
548 | f->data_base_addr = page_base | pdt_entry->data_base_addr; | |
549 | f->interrupt_base = interrupt_count; | |
550 | f->interrupt_count = pdt_entry->interrupt_source_count; | |
551 | f->irq_mask = rmi_gen_mask(f->interrupt_base, | |
552 | f->interrupt_count); | |
553 | } | |
554 | } | |
555 | ||
556 | static int rmi_scan_pdt(struct hid_device *hdev) | |
557 | { | |
558 | struct rmi_data *data = hid_get_drvdata(hdev); | |
559 | struct pdt_entry entry; | |
560 | int page; | |
561 | bool page_has_function; | |
562 | int i; | |
563 | int retval; | |
564 | int interrupt = 0; | |
565 | u16 page_start, pdt_start , pdt_end; | |
566 | ||
567 | hid_info(hdev, "Scanning PDT...\n"); | |
568 | ||
569 | for (page = 0; (page <= RMI4_MAX_PAGE); page++) { | |
570 | page_start = RMI4_PAGE_SIZE * page; | |
571 | pdt_start = page_start + PDT_START_SCAN_LOCATION; | |
572 | pdt_end = page_start + PDT_END_SCAN_LOCATION; | |
573 | ||
574 | page_has_function = false; | |
575 | for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { | |
576 | retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); | |
577 | if (retval) { | |
578 | hid_err(hdev, | |
579 | "Read of PDT entry at %#06x failed.\n", | |
580 | i); | |
581 | goto error_exit; | |
582 | } | |
583 | ||
584 | if (RMI4_END_OF_PDT(entry.function_number)) | |
585 | break; | |
586 | ||
587 | page_has_function = true; | |
588 | ||
589 | hid_info(hdev, "Found F%02X on page %#04x\n", | |
590 | entry.function_number, page); | |
591 | ||
592 | rmi_register_function(data, &entry, page, interrupt); | |
593 | interrupt += entry.interrupt_source_count; | |
594 | } | |
595 | ||
596 | if (!page_has_function) | |
597 | break; | |
598 | } | |
599 | ||
600 | hid_info(hdev, "%s: Done with PDT scan.\n", __func__); | |
601 | retval = 0; | |
602 | ||
603 | error_exit: | |
604 | return retval; | |
605 | } | |
606 | ||
607 | static int rmi_populate_f11(struct hid_device *hdev) | |
608 | { | |
609 | struct rmi_data *data = hid_get_drvdata(hdev); | |
610 | u8 buf[20]; | |
611 | int ret; | |
f15475c3 | 612 | bool has_query9; |
9e2c327e | 613 | bool has_query10 = false; |
f15475c3 | 614 | bool has_query11; |
9fb6bf02 | 615 | bool has_query12; |
8414947a AD |
616 | bool has_query27; |
617 | bool has_query28; | |
618 | bool has_query36 = false; | |
9fb6bf02 | 619 | bool has_physical_props; |
9e2c327e AD |
620 | bool has_gestures; |
621 | bool has_rel; | |
8414947a | 622 | bool has_data40 = false; |
9fb6bf02 | 623 | unsigned x_size, y_size; |
8414947a | 624 | u16 query_offset; |
9fb6bf02 BT |
625 | |
626 | if (!data->f11.query_base_addr) { | |
627 | hid_err(hdev, "No 2D sensor found, giving up.\n"); | |
628 | return -ENODEV; | |
629 | } | |
630 | ||
631 | /* query 0 contains some useful information */ | |
632 | ret = rmi_read(hdev, data->f11.query_base_addr, buf); | |
633 | if (ret) { | |
634 | hid_err(hdev, "can not get query 0: %d.\n", ret); | |
635 | return ret; | |
636 | } | |
f15475c3 AD |
637 | has_query9 = !!(buf[0] & BIT(3)); |
638 | has_query11 = !!(buf[0] & BIT(4)); | |
9fb6bf02 | 639 | has_query12 = !!(buf[0] & BIT(5)); |
8414947a AD |
640 | has_query27 = !!(buf[0] & BIT(6)); |
641 | has_query28 = !!(buf[0] & BIT(7)); | |
9fb6bf02 BT |
642 | |
643 | /* query 1 to get the max number of fingers */ | |
644 | ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); | |
645 | if (ret) { | |
646 | hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); | |
647 | return ret; | |
648 | } | |
649 | data->max_fingers = (buf[0] & 0x07) + 1; | |
650 | if (data->max_fingers > 5) | |
651 | data->max_fingers = 10; | |
652 | ||
653 | data->f11.report_size = data->max_fingers * 5 + | |
654 | DIV_ROUND_UP(data->max_fingers, 4); | |
655 | ||
656 | if (!(buf[0] & BIT(4))) { | |
657 | hid_err(hdev, "No absolute events, giving up.\n"); | |
658 | return -ENODEV; | |
659 | } | |
660 | ||
9e2c327e AD |
661 | has_rel = !!(buf[0] & BIT(3)); |
662 | has_gestures = !!(buf[0] & BIT(5)); | |
663 | ||
9fb6bf02 | 664 | /* |
9e2c327e AD |
665 | * At least 4 queries are guaranteed to be present in F11 |
666 | * +1 for query 5 which is present since absolute events are | |
667 | * reported and +1 for query 12. | |
9fb6bf02 | 668 | */ |
8414947a | 669 | query_offset = 6; |
9e2c327e AD |
670 | |
671 | if (has_rel) | |
8414947a | 672 | ++query_offset; /* query 6 is present */ |
9e2c327e | 673 | |
cabd9b5f AD |
674 | if (has_gestures) { |
675 | /* query 8 to find out if query 10 exists */ | |
676 | ret = rmi_read(hdev, | |
677 | data->f11.query_base_addr + query_offset + 1, buf); | |
678 | if (ret) { | |
679 | hid_err(hdev, "can not read gesture information: %d.\n", | |
680 | ret); | |
681 | return ret; | |
682 | } | |
683 | has_query10 = !!(buf[0] & BIT(2)); | |
684 | ||
8414947a | 685 | query_offset += 2; /* query 7 and 8 are present */ |
cabd9b5f | 686 | } |
f15475c3 AD |
687 | |
688 | if (has_query9) | |
8414947a | 689 | ++query_offset; |
f15475c3 AD |
690 | |
691 | if (has_query10) | |
8414947a | 692 | ++query_offset; |
f15475c3 AD |
693 | |
694 | if (has_query11) | |
8414947a | 695 | ++query_offset; |
f15475c3 AD |
696 | |
697 | /* query 12 to know if the physical properties are reported */ | |
9fb6bf02 | 698 | if (has_query12) { |
f15475c3 | 699 | ret = rmi_read(hdev, data->f11.query_base_addr |
8414947a | 700 | + query_offset, buf); |
9fb6bf02 BT |
701 | if (ret) { |
702 | hid_err(hdev, "can not get query 12: %d.\n", ret); | |
703 | return ret; | |
704 | } | |
705 | has_physical_props = !!(buf[0] & BIT(5)); | |
706 | ||
707 | if (has_physical_props) { | |
8414947a | 708 | query_offset += 1; |
9fb6bf02 | 709 | ret = rmi_read_block(hdev, |
f15475c3 | 710 | data->f11.query_base_addr |
8414947a | 711 | + query_offset, buf, 4); |
9fb6bf02 BT |
712 | if (ret) { |
713 | hid_err(hdev, "can not read query 15-18: %d.\n", | |
714 | ret); | |
715 | return ret; | |
716 | } | |
717 | ||
718 | x_size = buf[0] | (buf[1] << 8); | |
719 | y_size = buf[2] | (buf[3] << 8); | |
720 | ||
721 | data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); | |
722 | data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); | |
723 | ||
724 | hid_info(hdev, "%s: size in mm: %d x %d\n", | |
725 | __func__, data->x_size_mm, data->y_size_mm); | |
8414947a AD |
726 | |
727 | /* | |
728 | * query 15 - 18 contain the size of the sensor | |
729 | * and query 19 - 26 contain bezel dimensions | |
730 | */ | |
731 | query_offset += 12; | |
732 | } | |
733 | } | |
734 | ||
735 | if (has_query27) | |
736 | ++query_offset; | |
737 | ||
738 | if (has_query28) { | |
739 | ret = rmi_read(hdev, data->f11.query_base_addr | |
740 | + query_offset, buf); | |
741 | if (ret) { | |
742 | hid_err(hdev, "can not get query 28: %d.\n", ret); | |
743 | return ret; | |
744 | } | |
745 | ||
746 | has_query36 = !!(buf[0] & BIT(6)); | |
747 | } | |
748 | ||
749 | if (has_query36) { | |
750 | query_offset += 2; | |
751 | ret = rmi_read(hdev, data->f11.query_base_addr | |
752 | + query_offset, buf); | |
753 | if (ret) { | |
754 | hid_err(hdev, "can not get query 36: %d.\n", ret); | |
755 | return ret; | |
9fb6bf02 | 756 | } |
8414947a AD |
757 | |
758 | has_data40 = !!(buf[0] & BIT(5)); | |
9fb6bf02 BT |
759 | } |
760 | ||
8414947a AD |
761 | |
762 | if (has_data40) | |
763 | data->f11.report_size += data->max_fingers * 2; | |
764 | ||
dcce5837 BT |
765 | /* |
766 | * retrieve the ctrl registers | |
767 | * the ctrl register has a size of 20 but a fw bug split it into 16 + 4, | |
768 | * and there is no way to know if the first 20 bytes are here or not. | |
769 | * We use only the first 10 bytes, so get only them. | |
770 | */ | |
771 | ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 10); | |
9fb6bf02 | 772 | if (ret) { |
dcce5837 | 773 | hid_err(hdev, "can not read ctrl block of size 10: %d.\n", ret); |
9fb6bf02 BT |
774 | return ret; |
775 | } | |
776 | ||
777 | data->max_x = buf[6] | (buf[7] << 8); | |
778 | data->max_y = buf[8] | (buf[9] << 8); | |
779 | ||
780 | return 0; | |
781 | } | |
782 | ||
783 | static int rmi_populate_f30(struct hid_device *hdev) | |
784 | { | |
785 | struct rmi_data *data = hid_get_drvdata(hdev); | |
786 | u8 buf[20]; | |
787 | int ret; | |
788 | bool has_gpio, has_led; | |
789 | unsigned bytes_per_ctrl; | |
790 | u8 ctrl2_addr; | |
791 | int ctrl2_3_length; | |
792 | int i; | |
793 | ||
794 | /* function F30 is for physical buttons */ | |
795 | if (!data->f30.query_base_addr) { | |
796 | hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); | |
797 | return -ENODEV; | |
798 | } | |
799 | ||
800 | ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); | |
801 | if (ret) { | |
802 | hid_err(hdev, "can not get F30 query registers: %d.\n", ret); | |
803 | return ret; | |
804 | } | |
805 | ||
806 | has_gpio = !!(buf[0] & BIT(3)); | |
807 | has_led = !!(buf[0] & BIT(2)); | |
808 | data->gpio_led_count = buf[1] & 0x1f; | |
809 | ||
810 | /* retrieve ctrl 2 & 3 registers */ | |
811 | bytes_per_ctrl = (data->gpio_led_count + 7) / 8; | |
812 | /* Ctrl0 is present only if both has_gpio and has_led are set*/ | |
813 | ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; | |
814 | /* Ctrl1 is always be present */ | |
815 | ctrl2_addr += bytes_per_ctrl; | |
816 | ctrl2_3_length = 2 * bytes_per_ctrl; | |
817 | ||
818 | data->f30.report_size = bytes_per_ctrl; | |
819 | ||
820 | ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, | |
821 | buf, ctrl2_3_length); | |
822 | if (ret) { | |
823 | hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", | |
824 | ctrl2_3_length, ret); | |
825 | return ret; | |
826 | } | |
827 | ||
828 | for (i = 0; i < data->gpio_led_count; i++) { | |
829 | int byte_position = i >> 3; | |
830 | int bit_position = i & 0x07; | |
831 | u8 dir_byte = buf[byte_position]; | |
832 | u8 data_byte = buf[byte_position + bytes_per_ctrl]; | |
833 | bool dir = (dir_byte >> bit_position) & BIT(0); | |
834 | bool dat = (data_byte >> bit_position) & BIT(0); | |
835 | ||
836 | if (dir == 0) { | |
837 | /* input mode */ | |
838 | if (dat) { | |
839 | /* actual buttons have pull up resistor */ | |
840 | data->button_count++; | |
841 | set_bit(i, &data->button_mask); | |
842 | set_bit(i, &data->button_state_mask); | |
843 | } | |
844 | } | |
845 | ||
846 | } | |
847 | ||
848 | return 0; | |
849 | } | |
850 | ||
851 | static int rmi_populate(struct hid_device *hdev) | |
852 | { | |
853 | int ret; | |
854 | ||
855 | ret = rmi_scan_pdt(hdev); | |
856 | if (ret) { | |
857 | hid_err(hdev, "PDT scan failed with code %d.\n", ret); | |
858 | return ret; | |
859 | } | |
860 | ||
861 | ret = rmi_populate_f11(hdev); | |
862 | if (ret) { | |
863 | hid_err(hdev, "Error while initializing F11 (%d).\n", ret); | |
864 | return ret; | |
865 | } | |
866 | ||
867 | ret = rmi_populate_f30(hdev); | |
868 | if (ret) | |
869 | hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); | |
870 | ||
871 | return 0; | |
872 | } | |
873 | ||
874 | static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) | |
875 | { | |
876 | struct rmi_data *data = hid_get_drvdata(hdev); | |
877 | struct input_dev *input = hi->input; | |
878 | int ret; | |
879 | int res_x, res_y, i; | |
880 | ||
881 | data->input = input; | |
882 | ||
883 | hid_dbg(hdev, "Opening low level driver\n"); | |
884 | ret = hid_hw_open(hdev); | |
885 | if (ret) | |
886 | return; | |
887 | ||
2f43de60 AD |
888 | if (!(data->device_flags & RMI_DEVICE)) |
889 | return; | |
890 | ||
9fb6bf02 BT |
891 | /* Allow incoming hid reports */ |
892 | hid_device_io_start(hdev); | |
893 | ||
894 | ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); | |
895 | if (ret < 0) { | |
896 | dev_err(&hdev->dev, "failed to set rmi mode\n"); | |
897 | goto exit; | |
898 | } | |
899 | ||
900 | ret = rmi_set_page(hdev, 0); | |
901 | if (ret < 0) { | |
902 | dev_err(&hdev->dev, "failed to set page select to 0.\n"); | |
903 | goto exit; | |
904 | } | |
905 | ||
906 | ret = rmi_populate(hdev); | |
907 | if (ret) | |
908 | goto exit; | |
909 | ||
910 | __set_bit(EV_ABS, input->evbit); | |
911 | input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); | |
912 | input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); | |
913 | ||
b668fdce | 914 | if (data->x_size_mm && data->y_size_mm) { |
9fb6bf02 | 915 | res_x = (data->max_x - 1) / data->x_size_mm; |
b668fdce | 916 | res_y = (data->max_y - 1) / data->y_size_mm; |
9fb6bf02 BT |
917 | |
918 | input_abs_set_res(input, ABS_MT_POSITION_X, res_x); | |
919 | input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); | |
920 | } | |
921 | ||
922 | input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); | |
923 | input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); | |
924 | input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); | |
925 | input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); | |
926 | ||
927 | input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); | |
928 | ||
929 | if (data->button_count) { | |
930 | __set_bit(EV_KEY, input->evbit); | |
931 | for (i = 0; i < data->button_count; i++) | |
932 | __set_bit(BTN_LEFT + i, input->keybit); | |
933 | ||
934 | if (data->button_count == 1) | |
935 | __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); | |
936 | } | |
937 | ||
938 | set_bit(RMI_STARTED, &data->flags); | |
939 | ||
940 | exit: | |
941 | hid_device_io_stop(hdev); | |
942 | hid_hw_close(hdev); | |
943 | } | |
944 | ||
945 | static int rmi_input_mapping(struct hid_device *hdev, | |
946 | struct hid_input *hi, struct hid_field *field, | |
947 | struct hid_usage *usage, unsigned long **bit, int *max) | |
948 | { | |
2f43de60 AD |
949 | struct rmi_data *data = hid_get_drvdata(hdev); |
950 | ||
951 | /* | |
952 | * we want to make HID ignore the advertised HID collection | |
953 | * for RMI deivces | |
954 | */ | |
79364d87 AD |
955 | if (data->device_flags & RMI_DEVICE) { |
956 | if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) && | |
957 | ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)) | |
958 | return 0; | |
959 | ||
2f43de60 | 960 | return -1; |
79364d87 | 961 | } |
2f43de60 AD |
962 | |
963 | return 0; | |
964 | } | |
965 | ||
966 | static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, | |
967 | unsigned id, struct hid_report **report) | |
968 | { | |
969 | int i; | |
970 | ||
971 | *report = hdev->report_enum[type].report_id_hash[id]; | |
972 | if (*report) { | |
973 | for (i = 0; i < (*report)->maxfield; i++) { | |
974 | unsigned app = (*report)->field[i]->application; | |
975 | if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR) | |
976 | return 1; | |
977 | } | |
978 | } | |
979 | ||
980 | return 0; | |
9fb6bf02 BT |
981 | } |
982 | ||
983 | static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) | |
984 | { | |
985 | struct rmi_data *data = NULL; | |
986 | int ret; | |
987 | size_t alloc_size; | |
dd3edeb6 AD |
988 | struct hid_report *input_report; |
989 | struct hid_report *output_report; | |
2f43de60 | 990 | struct hid_report *feature_report; |
9fb6bf02 BT |
991 | |
992 | data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL); | |
993 | if (!data) | |
994 | return -ENOMEM; | |
995 | ||
996 | INIT_WORK(&data->reset_work, rmi_reset_work); | |
997 | data->hdev = hdev; | |
998 | ||
999 | hid_set_drvdata(hdev, data); | |
1000 | ||
1001 | hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS; | |
1002 | ||
1003 | ret = hid_parse(hdev); | |
1004 | if (ret) { | |
1005 | hid_err(hdev, "parse failed\n"); | |
1006 | return ret; | |
1007 | } | |
1008 | ||
79364d87 AD |
1009 | if (id->driver_data) |
1010 | data->device_flags = id->driver_data; | |
1011 | ||
2f43de60 AD |
1012 | /* |
1013 | * Check for the RMI specific report ids. If they are misisng | |
1014 | * simply return and let the events be processed by hid-input | |
1015 | */ | |
1016 | if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT, | |
1017 | RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) { | |
1018 | hid_dbg(hdev, "device does not have set mode feature report\n"); | |
1019 | goto start; | |
1020 | } | |
1021 | ||
1022 | if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT, | |
1023 | RMI_ATTN_REPORT_ID, &input_report)) { | |
1024 | hid_dbg(hdev, "device does not have attention input report\n"); | |
1025 | goto start; | |
dd3edeb6 AD |
1026 | } |
1027 | ||
b8aed6ea | 1028 | data->input_report_size = hid_report_len(input_report); |
dd3edeb6 | 1029 | |
2f43de60 AD |
1030 | if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT, |
1031 | RMI_WRITE_REPORT_ID, &output_report)) { | |
1032 | hid_dbg(hdev, | |
1033 | "device does not have rmi write output report\n"); | |
1034 | goto start; | |
dd3edeb6 AD |
1035 | } |
1036 | ||
b8aed6ea | 1037 | data->output_report_size = hid_report_len(output_report); |
9fb6bf02 | 1038 | |
2f43de60 | 1039 | data->device_flags |= RMI_DEVICE; |
9fb6bf02 BT |
1040 | alloc_size = data->output_report_size + data->input_report_size; |
1041 | ||
1042 | data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); | |
1043 | if (!data->writeReport) { | |
1044 | ret = -ENOMEM; | |
1045 | return ret; | |
1046 | } | |
1047 | ||
1048 | data->readReport = data->writeReport + data->output_report_size; | |
1049 | ||
1050 | init_waitqueue_head(&data->wait); | |
1051 | ||
1052 | mutex_init(&data->page_mutex); | |
1053 | ||
2f43de60 | 1054 | start: |
9fb6bf02 BT |
1055 | ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); |
1056 | if (ret) { | |
1057 | hid_err(hdev, "hw start failed\n"); | |
1058 | return ret; | |
1059 | } | |
1060 | ||
2f43de60 AD |
1061 | if ((data->device_flags & RMI_DEVICE) && |
1062 | !test_bit(RMI_STARTED, &data->flags)) | |
daebdd7e AD |
1063 | /* |
1064 | * The device maybe in the bootloader if rmi_input_configured | |
1065 | * failed to find F11 in the PDT. Print an error, but don't | |
1066 | * return an error from rmi_probe so that hidraw will be | |
1067 | * accessible from userspace. That way a userspace tool | |
1068 | * can be used to reload working firmware on the touchpad. | |
1069 | */ | |
1070 | hid_err(hdev, "Device failed to be properly configured\n"); | |
9fb6bf02 | 1071 | |
9fb6bf02 BT |
1072 | return 0; |
1073 | } | |
1074 | ||
1075 | static void rmi_remove(struct hid_device *hdev) | |
1076 | { | |
1077 | struct rmi_data *hdata = hid_get_drvdata(hdev); | |
1078 | ||
1079 | clear_bit(RMI_STARTED, &hdata->flags); | |
1080 | ||
1081 | hid_hw_stop(hdev); | |
1082 | } | |
1083 | ||
1084 | static const struct hid_device_id rmi_id[] = { | |
e9287099 AD |
1085 | { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14), |
1086 | .driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS }, | |
ba391e5a | 1087 | { HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) }, |
9fb6bf02 BT |
1088 | { } |
1089 | }; | |
1090 | MODULE_DEVICE_TABLE(hid, rmi_id); | |
1091 | ||
1092 | static struct hid_driver rmi_driver = { | |
1093 | .name = "hid-rmi", | |
1094 | .id_table = rmi_id, | |
1095 | .probe = rmi_probe, | |
1096 | .remove = rmi_remove, | |
2f43de60 | 1097 | .event = rmi_event, |
9fb6bf02 BT |
1098 | .raw_event = rmi_raw_event, |
1099 | .input_mapping = rmi_input_mapping, | |
1100 | .input_configured = rmi_input_configured, | |
1101 | #ifdef CONFIG_PM | |
1102 | .resume = rmi_post_resume, | |
1103 | .reset_resume = rmi_post_reset, | |
1104 | #endif | |
1105 | }; | |
1106 | ||
1107 | module_hid_driver(rmi_driver); | |
1108 | ||
1109 | MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>"); | |
1110 | MODULE_DESCRIPTION("RMI HID driver"); | |
1111 | MODULE_LICENSE("GPL"); |