[linux-block.git] / drivers / gpu / drm / panel / panel-sharp-ls060t1sx01.c

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2021 Linaro Ltd.
 * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
 *   Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
 */

#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>

#include <video/mipi_display.h>

#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>

struct sharp_ls060 {
	struct drm_panel panel;
	struct mipi_dsi_device *dsi;
	struct regulator *vddi_supply;
	struct regulator *vddh_supply;
	struct regulator *avdd_supply;
	struct regulator *avee_supply;
	struct gpio_desc *reset_gpio;
	bool prepared;
};

static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
{
	return container_of(panel, struct sharp_ls060, panel);
}

#define dsi_dcs_write_seq(dsi, seq...) ({				\
		static const u8 d[] = { seq };				\
									\
		mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
	})

static void sharp_ls060_reset(struct sharp_ls060 *ctx)
{
	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
	usleep_range(10000, 11000);
	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
	usleep_range(10000, 11000);
	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
	usleep_range(10000, 11000);
}

static int sharp_ls060_on(struct sharp_ls060 *ctx)
{
	struct mipi_dsi_device *dsi = ctx->dsi;
	struct device *dev = &dsi->dev;
	int ret;

	dsi->mode_flags |= MIPI_DSI_MODE_LPM;

	ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
	if (ret < 0) {
		dev_err(dev, "Failed to send command: %d\n", ret);
		return ret;
	}

	ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
	if (ret < 0) {
		dev_err(dev, "Failed to send command: %d\n", ret);
		return ret;
	}

	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
	if (ret < 0) {
		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
		return ret;
	}
	msleep(120);

	ret = mipi_dsi_dcs_set_display_on(dsi);
	if (ret < 0) {
		dev_err(dev, "Failed to set display on: %d\n", ret);
		return ret;
	}
	msleep(50);

	return 0;
}

static int sharp_ls060_off(struct sharp_ls060 *ctx)
{
	struct mipi_dsi_device *dsi = ctx->dsi;
	struct device *dev = &dsi->dev;
	int ret;

	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;

	ret = mipi_dsi_dcs_set_display_off(dsi);
	if (ret < 0) {
		dev_err(dev, "Failed to set display off: %d\n", ret);
		return ret;
	}
	usleep_range(2000, 3000);

	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
	if (ret < 0) {
		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
		return ret;
	}
	msleep(121);

	return 0;
}

static int sharp_ls060_prepare(struct drm_panel *panel)
{
	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
	struct device *dev = &ctx->dsi->dev;
	int ret;

	if (ctx->prepared)
		return 0;

	ret = regulator_enable(ctx->vddi_supply);
	if (ret < 0)
		return ret;

	ret = regulator_enable(ctx->avdd_supply);
	if (ret < 0)
		goto err_avdd;

	usleep_range(1000, 2000);

	ret = regulator_enable(ctx->avee_supply);
	if (ret < 0)
		goto err_avee;

	usleep_range(10000, 11000);

	ret = regulator_enable(ctx->vddh_supply);
	if (ret < 0)
		goto err_vddh;

	usleep_range(10000, 11000);

	sharp_ls060_reset(ctx);

	ret = sharp_ls060_on(ctx);
	if (ret < 0) {
		dev_err(dev, "Failed to initialize panel: %d\n", ret);
		goto err_on;
	}

	ctx->prepared = true;

	return 0;

err_on:
	regulator_disable(ctx->vddh_supply);

	usleep_range(10000, 11000);

err_vddh:
	regulator_disable(ctx->avee_supply);

err_avee:
	regulator_disable(ctx->avdd_supply);

	gpiod_set_value_cansleep(ctx->reset_gpio, 1);

err_avdd:
	regulator_disable(ctx->vddi_supply);

	return ret;
}

static int sharp_ls060_unprepare(struct drm_panel *panel)
{
	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
	struct device *dev = &ctx->dsi->dev;
	int ret;

	if (!ctx->prepared)
		return 0;

	ret = sharp_ls060_off(ctx);
	if (ret < 0)
		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);

	regulator_disable(ctx->vddh_supply);

	usleep_range(10000, 11000);

	regulator_disable(ctx->avee_supply);
	regulator_disable(ctx->avdd_supply);

	gpiod_set_value_cansleep(ctx->reset_gpio, 1);

	regulator_disable(ctx->vddi_supply);

	ctx->prepared = false;
	return 0;
}

static const struct drm_display_mode sharp_ls060_mode = {
	.clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
	.hdisplay = 1080,
	.hsync_start = 1080 + 96,
	.hsync_end = 1080 + 96 + 16,
	.htotal = 1080 + 96 + 16 + 64,
	.vdisplay = 1920,
	.vsync_start = 1920 + 4,
	.vsync_end = 1920 + 4 + 1,
	.vtotal = 1920 + 4 + 1 + 16,
	.width_mm = 75,
	.height_mm = 132,
};

static int sharp_ls060_get_modes(struct drm_panel *panel,
				 struct drm_connector *connector)
{
	struct drm_display_mode *mode;

	mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
	if (!mode)
		return -ENOMEM;

	drm_mode_set_name(mode);

	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
	connector->display_info.width_mm = mode->width_mm;
	connector->display_info.height_mm = mode->height_mm;
	drm_mode_probed_add(connector, mode);

	return 1;
}

static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
	.prepare = sharp_ls060_prepare,
	.unprepare = sharp_ls060_unprepare,
	.get_modes = sharp_ls060_get_modes,
};

static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
{
	struct device *dev = &dsi->dev;
	struct sharp_ls060 *ctx;
	int ret;

	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
	if (!ctx)
		return -ENOMEM;

	ctx->vddi_supply = devm_regulator_get(dev, "vddi");
	if (IS_ERR(ctx->vddi_supply))
		return PTR_ERR(ctx->vddi_supply);

	ctx->vddh_supply = devm_regulator_get(dev, "vddh");
	if (IS_ERR(ctx->vddh_supply))
		return PTR_ERR(ctx->vddh_supply);

	ctx->avdd_supply = devm_regulator_get(dev, "avdd");
	if (IS_ERR(ctx->avdd_supply))
		return PTR_ERR(ctx->avdd_supply);

	ctx->avee_supply = devm_regulator_get(dev, "avee");
	if (IS_ERR(ctx->avee_supply))
		return PTR_ERR(ctx->avee_supply);

	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
	if (IS_ERR(ctx->reset_gpio))
		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
				     "Failed to get reset-gpios\n");

	ctx->dsi = dsi;
	mipi_dsi_set_drvdata(dsi, ctx);

	dsi->lanes = 4;
	dsi->format = MIPI_DSI_FMT_RGB888;
	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
			  MIPI_DSI_MODE_NO_EOT_PACKET |
			  MIPI_DSI_CLOCK_NON_CONTINUOUS;

	drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
		       DRM_MODE_CONNECTOR_DSI);

	ret = drm_panel_of_backlight(&ctx->panel);
	if (ret)
		return dev_err_probe(dev, ret, "Failed to get backlight\n");

	drm_panel_add(&ctx->panel);

	ret = mipi_dsi_attach(dsi);
	if (ret < 0) {
		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
		drm_panel_remove(&ctx->panel);
		return ret;
	}

	return 0;
}

static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
{
	struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
	int ret;

	ret = mipi_dsi_detach(dsi);
	if (ret < 0)
		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);

	drm_panel_remove(&ctx->panel);

	return 0;
}

static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
	{ .compatible = "sharp,ls060t1sx01" },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);

static struct mipi_dsi_driver sharp_ls060_driver = {
	.probe = sharp_ls060_probe,
	.remove = sharp_ls060_remove,
	.driver = {
		.name = "panel-sharp-ls060t1sx01",
		.of_match_table = sharp_ls060t1sx01_of_match,
	},
};
module_mipi_dsi_driver(sharp_ls060_driver);

MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
MODULE_LICENSE("GPL v2");
Commit	Line	Data
914b6f29 DB	1	// SPDX-License-Identifier: GPL-2.0-only
	2	/* Copyright (c) 2021 Linaro Ltd.
	3	* Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
	4	* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
	5	*/
	6
	7	#include <linux/delay.h>
	8	#include <linux/gpio/consumer.h>
	9	#include <linux/module.h>
	10	#include <linux/of.h>
	11	#include <linux/regulator/consumer.h>
	12
	13	#include <video/mipi_display.h>
	14
	15	#include <drm/drm_mipi_dsi.h>
	16	#include <drm/drm_modes.h>
	17	#include <drm/drm_panel.h>
	18
	19	struct sharp_ls060 {
	20	struct drm_panel panel;
	21	struct mipi_dsi_device *dsi;
	22	struct regulator *vddi_supply;
	23	struct regulator *vddh_supply;
	24	struct regulator *avdd_supply;
	25	struct regulator *avee_supply;
	26	struct gpio_desc *reset_gpio;
	27	bool prepared;
	28	};
	29
	30	static inline struct sharp_ls060 to_sharp_ls060(struct drm_panel panel)
	31	{
	32	return container_of(panel, struct sharp_ls060, panel);
	33	}
	34
	35	#define dsi_dcs_write_seq(dsi, seq...) ({ \
	36	static const u8 d[] = { seq }; \
	37	\
	38	mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
	39	})
	40
	41	static void sharp_ls060_reset(struct sharp_ls060 *ctx)
	42	{
	43	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
	44	usleep_range(10000, 11000);
	45	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
	46	usleep_range(10000, 11000);
	47	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
	48	usleep_range(10000, 11000);
	49	}
	50
	51	static int sharp_ls060_on(struct sharp_ls060 *ctx)
	52	{
	53	struct mipi_dsi_device *dsi = ctx->dsi;
	54	struct device *dev = &dsi->dev;
	55	int ret;
	56
	57	dsi->mode_flags \|= MIPI_DSI_MODE_LPM;
	58
	59	ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
	60	if (ret < 0) {
	61	dev_err(dev, "Failed to send command: %d\n", ret);
	62	return ret;
	63	}
	64
65	ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
66	if (ret < 0) {
67	dev_err(dev, "Failed to send command: %d\n", ret);
68	return ret;
69	}
70
71	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
72	if (ret < 0) {
73	dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
74	return ret;
75	}
76	msleep(120);
77
78	ret = mipi_dsi_dcs_set_display_on(dsi);
79	if (ret < 0) {
80	dev_err(dev, "Failed to set display on: %d\n", ret);
81	return ret;
82	}
83	msleep(50);
84
85	return 0;
86	}
87
88	static int sharp_ls060_off(struct sharp_ls060 *ctx)
89	{
90	struct mipi_dsi_device *dsi = ctx->dsi;
91	struct device *dev = &dsi->dev;
92	int ret;
93
94	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
95
96	ret = mipi_dsi_dcs_set_display_off(dsi);
97	if (ret < 0) {
98	dev_err(dev, "Failed to set display off: %d\n", ret);
99	return ret;
100	}
101	usleep_range(2000, 3000);
102
103	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
104	if (ret < 0) {
105	dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
106	return ret;
107	}
108	msleep(121);
109
110	return 0;
111	}
112
113	static int sharp_ls060_prepare(struct drm_panel *panel)
114	{
115	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
116	struct device *dev = &ctx->dsi->dev;
117	int ret;
118
119	if (ctx->prepared)
120	return 0;
121
122	ret = regulator_enable(ctx->vddi_supply);
123	if (ret < 0)
124	return ret;
125
126	ret = regulator_enable(ctx->avdd_supply);
127	if (ret < 0)
128	goto err_avdd;
129
130	usleep_range(1000, 2000);
131
132	ret = regulator_enable(ctx->avee_supply);
133	if (ret < 0)
134	goto err_avee;
135
136	usleep_range(10000, 11000);
137
138	ret = regulator_enable(ctx->vddh_supply);
139	if (ret < 0)
140	goto err_vddh;
141
142	usleep_range(10000, 11000);
143
144	sharp_ls060_reset(ctx);
145
146	ret = sharp_ls060_on(ctx);
147	if (ret < 0) {
148	dev_err(dev, "Failed to initialize panel: %d\n", ret);
149	goto err_on;
150	}
151
152	ctx->prepared = true;
153
154	return 0;
155
156	err_on:
157	regulator_disable(ctx->vddh_supply);
158
159	usleep_range(10000, 11000);
160
161	err_vddh:
162	regulator_disable(ctx->avee_supply);
163
164	err_avee:
165	regulator_disable(ctx->avdd_supply);
166
167	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
168
169	err_avdd:
170	regulator_disable(ctx->vddi_supply);
171
172	return ret;
173	}
174
175	static int sharp_ls060_unprepare(struct drm_panel *panel)
176	{
177	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
178	struct device *dev = &ctx->dsi->dev;
179	int ret;
180
181	if (!ctx->prepared)
182	return 0;
183
184	ret = sharp_ls060_off(ctx);
185	if (ret < 0)
186	dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
187
188	regulator_disable(ctx->vddh_supply);
189
190	usleep_range(10000, 11000);
191
192	regulator_disable(ctx->avee_supply);
193	regulator_disable(ctx->avdd_supply);
194
195	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
196
197	regulator_disable(ctx->vddi_supply);
198
199	ctx->prepared = false;
200	return 0;
201	}
202
203	static const struct drm_display_mode sharp_ls060_mode = {
204	.clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
205	.hdisplay = 1080,
206	.hsync_start = 1080 + 96,
207	.hsync_end = 1080 + 96 + 16,
208	.htotal = 1080 + 96 + 16 + 64,
209	.vdisplay = 1920,
210	.vsync_start = 1920 + 4,
211	.vsync_end = 1920 + 4 + 1,
212	.vtotal = 1920 + 4 + 1 + 16,
213	.width_mm = 75,
214	.height_mm = 132,
215	};
216
217	static int sharp_ls060_get_modes(struct drm_panel *panel,
218	struct drm_connector *connector)
219	{
220	struct drm_display_mode *mode;
221
222	mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
223	if (!mode)
224	return -ENOMEM;
225
226	drm_mode_set_name(mode);
227
228	mode->type = DRM_MODE_TYPE_DRIVER \| DRM_MODE_TYPE_PREFERRED;
229	connector->display_info.width_mm = mode->width_mm;
230	connector->display_info.height_mm = mode->height_mm;
231	drm_mode_probed_add(connector, mode);
232
233	return 1;
234	}
235
236	static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
237	.prepare = sharp_ls060_prepare,
238	.unprepare = sharp_ls060_unprepare,
239	.get_modes = sharp_ls060_get_modes,
240	};
241
242	static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
243	{
244	struct device *dev = &dsi->dev;
245	struct sharp_ls060 *ctx;
246	int ret;
247
248	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
249	if (!ctx)
250	return -ENOMEM;
251
252	ctx->vddi_supply = devm_regulator_get(dev, "vddi");
253	if (IS_ERR(ctx->vddi_supply))
254	return PTR_ERR(ctx->vddi_supply);
255
256	ctx->vddh_supply = devm_regulator_get(dev, "vddh");
257	if (IS_ERR(ctx->vddh_supply))
258	return PTR_ERR(ctx->vddh_supply);
259
260	ctx->avdd_supply = devm_regulator_get(dev, "avdd");
261	if (IS_ERR(ctx->avdd_supply))
262	return PTR_ERR(ctx->avdd_supply);
263
264	ctx->avee_supply = devm_regulator_get(dev, "avee");
265	if (IS_ERR(ctx->avee_supply))
266	return PTR_ERR(ctx->avee_supply);
267
268	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
269	if (IS_ERR(ctx->reset_gpio))
270	return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
271	"Failed to get reset-gpios\n");
272
273	ctx->dsi = dsi;
274	mipi_dsi_set_drvdata(dsi, ctx);
275
276	dsi->lanes = 4;
277	dsi->format = MIPI_DSI_FMT_RGB888;
278	dsi->mode_flags = MIPI_DSI_MODE_VIDEO \| MIPI_DSI_MODE_VIDEO_BURST \|
279	MIPI_DSI_MODE_NO_EOT_PACKET \|
280	MIPI_DSI_CLOCK_NON_CONTINUOUS;
281
282	drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
283	DRM_MODE_CONNECTOR_DSI);
284
285	ret = drm_panel_of_backlight(&ctx->panel);
286	if (ret)
287	return dev_err_probe(dev, ret, "Failed to get backlight\n");
288
289	drm_panel_add(&ctx->panel);
290
291	ret = mipi_dsi_attach(dsi);
292	if (ret < 0) {
293	dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
294	drm_panel_remove(&ctx->panel);
295	return ret;
296	}
297
298	return 0;
299	}
300
301	static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
302	{
303	struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
304	int ret;
305
306	ret = mipi_dsi_detach(dsi);
307	if (ret < 0)
308	dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
309
310	drm_panel_remove(&ctx->panel);
311
312	return 0;
313	}
314
315	static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
316	{ .compatible = "sharp,ls060t1sx01" },
317	{ /* sentinel */ }
318	};
319	MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);
320
321	static struct mipi_dsi_driver sharp_ls060_driver = {
322	.probe = sharp_ls060_probe,
323	.remove = sharp_ls060_remove,
324	.driver = {
325	.name = "panel-sharp-ls060t1sx01",
326	.of_match_table = sharp_ls060t1sx01_of_match,
327	},
328	};
329	module_mipi_dsi_driver(sharp_ls060_driver);
330
331	MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
332	MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
333	MODULE_LICENSE("GPL v2");