Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
7444a72e MB |
33 | |
34 | menuconfig GPIOLIB | |
35 | bool "GPIO Support" | |
36 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
7444a72e MB |
37 | help |
38 | This enables GPIO support through the generic GPIO library. | |
39 | You only need to enable this, if you also want to enable | |
e849dc04 | 40 | one or more of the GPIO drivers below. |
7444a72e MB |
41 | |
42 | If unsure, say N. | |
a9c5fff5 | 43 | |
7444a72e | 44 | if GPIOLIB |
a9c5fff5 | 45 | |
b69ac524 AC |
46 | config GPIO_DEVRES |
47 | def_bool y | |
48 | depends on HAS_IOMEM | |
49 | ||
f141ed65 GL |
50 | config OF_GPIO |
51 | def_bool y | |
afe760e4 | 52 | depends on OF |
f141ed65 | 53 | |
e29482e8 MN |
54 | config GPIO_ACPI |
55 | def_bool y | |
56 | depends on ACPI | |
57 | ||
14250520 | 58 | config GPIOLIB_IRQCHIP |
fc346270 | 59 | select IRQ_DOMAIN |
14250520 LW |
60 | bool |
61 | ||
a9c5fff5 DB |
62 | config DEBUG_GPIO |
63 | bool "Debug GPIO calls" | |
64 | depends on DEBUG_KERNEL | |
65 | help | |
66 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
67 | These checks help ensure that GPIOs have been properly initialized |
68 | before they are used, and that sleeping calls are not made from | |
69 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
70 | slower. The diagnostics help catch the type of setup errors |
71 | that are most common when setting up new platforms or boards. | |
72 | ||
d8f388d8 DB |
73 | config GPIO_SYSFS |
74 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 75 | depends on SYSFS |
d8f388d8 DB |
76 | help |
77 | Say Y here to add a sysfs interface for GPIOs. | |
78 | ||
79 | This is mostly useful to work around omissions in a system's | |
80 | kernel support. Those are common in custom and semicustom | |
81 | hardware assembled using standard kernels with a minimum of | |
82 | custom patches. In those cases, userspace code may import | |
83 | a given GPIO from the kernel, if no kernel driver requested it. | |
84 | ||
85 | Kernel drivers may also request that a particular GPIO be | |
86 | exported to userspace; this can be useful when debugging. | |
87 | ||
c103de24 GL |
88 | config GPIO_GENERIC |
89 | tristate | |
90 | ||
e849dc04 | 91 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 92 | |
07bfc915 | 93 | config GPIO_DA9052 |
94 | tristate "Dialog DA9052 GPIO" | |
1c4fe3aa | 95 | depends on PMIC_DA9052 |
07bfc915 | 96 | help |
97 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
98 | ||
04ed4279 AJ |
99 | config GPIO_DA9055 |
100 | tristate "Dialog Semiconductor DA9055 GPIO" | |
101 | depends on MFD_DA9055 | |
102 | help | |
103 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
104 | ||
105 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
106 | be controller by this driver. | |
107 | ||
108 | If driver is built as a module it will be called gpio-da9055. | |
109 | ||
e952805d WS |
110 | config GPIO_MAX730X |
111 | tristate | |
112 | ||
e849dc04 | 113 | comment "Memory mapped GPIO drivers:" |
0bcb6069 | 114 | |
af0a33e2 AS |
115 | config GPIO_74XX_MMIO |
116 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
117 | depends on OF_GPIO | |
118 | select GPIO_GENERIC | |
119 | help | |
120 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
121 | with MMIO access. Compatible models include: | |
122 | 1 bit: 741G125 (Input), 741G74 (Output) | |
123 | 2 bits: 742G125 (Input), 7474 (Output) | |
124 | 4 bits: 74125 (Input), 74175 (Output) | |
125 | 6 bits: 74365 (Input), 74174 (Output) | |
126 | 8 bits: 74244 (Input), 74273 (Output) | |
127 | 16 bits: 741624 (Input), 7416374 (Output) | |
128 | ||
a3b8d4a5 | 129 | config GPIO_CLPS711X |
55fe14ab | 130 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 131 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
132 | select GPIO_GENERIC |
133 | help | |
134 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 135 | |
ee89cf63 GS |
136 | config GPIO_DAVINCI |
137 | bool "TI Davinci/Keystone GPIO support" | |
138 | default y if ARCH_DAVINCI | |
139 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
140 | help | |
141 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
142 | ||
c103de24 GL |
143 | config GPIO_GENERIC_PLATFORM |
144 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
145 | select GPIO_GENERIC | |
aeec56e3 | 146 | help |
c103de24 | 147 | Say yes here to support basic platform_device memory-mapped GPIO controllers. |
aeec56e3 | 148 | |
7779b345 JI |
149 | config GPIO_DWAPB |
150 | tristate "Synopsys DesignWare APB GPIO driver" | |
1972c97d LW |
151 | depends on ARM |
152 | depends on OF_GPIO | |
7779b345 JI |
153 | select GPIO_GENERIC |
154 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
155 | help |
156 | Say Y or M here to build support for the Synopsys DesignWare APB | |
157 | GPIO block. | |
158 | ||
9cc0cb3c DT |
159 | config GPIO_IT8761E |
160 | tristate "IT8761E GPIO support" | |
265fe02b | 161 | depends on X86 # unconditional access to IO space. |
9cc0cb3c DT |
162 | help |
163 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
164 | ||
a07e103e MD |
165 | config GPIO_EM |
166 | tristate "Emma Mobile GPIO" | |
b5927854 | 167 | depends on ARM && OF_GPIO |
a07e103e MD |
168 | help |
169 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
170 | ||
c6b52c13 HS |
171 | config GPIO_EP93XX |
172 | def_bool y | |
173 | depends on ARCH_EP93XX | |
1e4c8842 | 174 | select GPIO_GENERIC |
c6b52c13 | 175 | |
9af4d80b FV |
176 | config GPIO_ZEVIO |
177 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
feabf0cd | 178 | depends on ARM && OF_GPIO |
9af4d80b FV |
179 | help |
180 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. | |
181 | ||
5238f7bc JC |
182 | config GPIO_MM_LANTIQ |
183 | bool "Lantiq Memory mapped GPIOs" | |
184 | depends on LANTIQ && SOC_XWAY | |
185 | help | |
186 | This enables support for memory mapped GPIOs on the External Bus Unit | |
187 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
188 | created by attaching a 16bit latch to the bus. | |
189 | ||
6c17aa01 SG |
190 | config GPIO_F7188X |
191 | tristate "F71882FG and F71889F GPIO support" | |
192 | depends on X86 | |
193 | help | |
194 | This option enables support for GPIOs found on Fintek Super-I/O | |
195 | chips F71882FG and F71889F. | |
196 | ||
197 | To compile this driver as a module, choose M here: the module will | |
198 | be called f7188x-gpio. | |
199 | ||
0299b77b JJ |
200 | config GPIO_MOXART |
201 | bool "MOXART GPIO support" | |
202 | depends on ARCH_MOXART | |
203 | help | |
204 | Select this option to enable GPIO driver for | |
205 | MOXA ART SoC devices. | |
206 | ||
6eae1ace GL |
207 | config GPIO_MPC5200 |
208 | def_bool y | |
209 | depends on PPC_MPC52xx | |
210 | ||
c68308dd WS |
211 | config GPIO_MPC8XXX |
212 | bool "MPC512x/MPC8xxx GPIO support" | |
213 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ | |
214 | FSL_SOC_BOOKE || PPC_86xx | |
215 | help | |
216 | Say Y here if you're going to use hardware that connects to the | |
217 | MPC512x/831x/834x/837x/8572/8610 GPIOs. | |
218 | ||
74d10d74 DB |
219 | config GPIO_MSM_V1 |
220 | tristate "Qualcomm MSM GPIO v1" | |
afcc0f8c | 221 | depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) |
74d10d74 DB |
222 | help |
223 | Say yes here to support the GPIO interface on ARM v6 based | |
224 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
225 | selected for GPIO, and are controlled by this driver. | |
226 | ||
1a5ab4b3 DB |
227 | config GPIO_MSM_V2 |
228 | tristate "Qualcomm MSM GPIO v2" | |
add798a4 | 229 | depends on GPIOLIB && OF && ARCH_QCOM |
1a5ab4b3 DB |
230 | help |
231 | Say yes here to support the GPIO interface on ARM v7 based | |
232 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
233 | selected for GPIO, and are controlled by this driver. | |
234 | ||
fefe7b09 TP |
235 | config GPIO_MVEBU |
236 | def_bool y | |
49e928d6 | 237 | depends on PLAT_ORION |
bc1008cf | 238 | depends on OF |
fefe7b09 TP |
239 | select GPIO_GENERIC |
240 | select GENERIC_IRQ_CHIP | |
241 | ||
d37a65bb SG |
242 | config GPIO_MXC |
243 | def_bool y | |
244 | depends on ARCH_MXC | |
c103de24 | 245 | select GPIO_GENERIC |
e4ea9333 | 246 | select GENERIC_IRQ_CHIP |
c103de24 GL |
247 | |
248 | config GPIO_MXS | |
249 | def_bool y | |
250 | depends on ARCH_MXS | |
06f88a8a | 251 | select GPIO_GENERIC |
498c17cf | 252 | select GENERIC_IRQ_CHIP |
d37a65bb | 253 | |
aca58a66 DD |
254 | config GPIO_OCTEON |
255 | tristate "Cavium OCTEON GPIO" | |
256 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
257 | default y | |
258 | help | |
259 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
260 | family of SOCs. | |
261 | ||
cd0a3748 | 262 | config GPIO_OMAP |
9d5d96ef | 263 | bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS |
cd0a3748 | 264 | default y if ARCH_OMAP |
9d5d96ef AB |
265 | depends on ARM |
266 | select GENERIC_IRQ_CHIP | |
fb655f57 | 267 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
268 | help |
269 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
270 | ||
1e9c2859 BS |
271 | config GPIO_PL061 |
272 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 273 | depends on ARM_AMBA |
a5d6d271 | 274 | select IRQ_DOMAIN |
8d5b24bd | 275 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
276 | help |
277 | Say yes here to support the PrimeCell PL061 GPIO device | |
278 | ||
157d2644 HZ |
279 | config GPIO_PXA |
280 | bool "PXA GPIO support" | |
281 | depends on ARCH_PXA || ARCH_MMP | |
282 | help | |
283 | Say yes here to support the PXA GPIO device | |
284 | ||
119f5e44 MD |
285 | config GPIO_RCAR |
286 | tristate "Renesas R-Car GPIO" | |
821e85f2 | 287 | depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST) |
119f5e44 MD |
288 | help |
289 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
290 | ||
880cf071 TF |
291 | config GPIO_SAMSUNG |
292 | bool | |
293 | depends on PLAT_SAMSUNG | |
294 | help | |
295 | Legacy GPIO support. Use only for platforms without support for | |
296 | pinctrl. | |
297 | ||
12262bef BR |
298 | config GPIO_SCH311X |
299 | tristate "SMSC SCH311x SuperI/O GPIO" | |
300 | help | |
301 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
302 | SCH3116 "Super I/O" chipsets. | |
303 | ||
304 | To compile this driver as a module, choose M here: the module will | |
305 | be called gpio-sch311x. | |
306 | ||
b53bc281 SH |
307 | config GPIO_SPEAR_SPICS |
308 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
309 | depends on PLAT_SPEAR | |
310 | select GENERIC_IRQ_CHIP | |
311 | help | |
312 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
313 | ||
7b0d44f3 AR |
314 | config GPIO_STA2X11 |
315 | bool "STA2x11/ConneXt GPIO support" | |
316 | depends on MFD_STA2X11 | |
317 | select GENERIC_IRQ_CHIP | |
318 | help | |
319 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
320 | The GPIO module has 128 GPIO pins with alternate functions. | |
321 | ||
6a8a0c1d AS |
322 | config GPIO_SYSCON |
323 | tristate "GPIO based on SYSCON" | |
324 | depends on MFD_SYSCON && OF | |
325 | help | |
326 | Say yes here to support GPIO functionality though SYSCON driver. | |
327 | ||
759f5f37 VD |
328 | config GPIO_TS5500 |
329 | tristate "TS-5500 DIO blocks and compatibles" | |
f29b9d13 | 330 | depends on TS5500 || COMPILE_TEST |
759f5f37 VD |
331 | help |
332 | This driver supports Digital I/O exposed by pin blocks found on some | |
333 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
334 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
335 | LCD port. | |
336 | ||
9caf1f22 JH |
337 | config GPIO_TZ1090 |
338 | bool "Toumaz Xenif TZ1090 GPIO support" | |
339 | depends on SOC_TZ1090 | |
04777396 | 340 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
341 | default y |
342 | help | |
343 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
344 | ||
79bb6460 JH |
345 | config GPIO_TZ1090_PDC |
346 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
347 | depends on SOC_TZ1090 | |
348 | default y | |
349 | help | |
350 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
351 | ||
7f2691a1 SA |
352 | config GPIO_VF610 |
353 | def_bool y | |
354 | depends on ARCH_MXC && SOC_VF610 | |
355 | select GPIOLIB_IRQCHIP | |
356 | help | |
357 | Say yes here to support Vybrid vf610 GPIOs. | |
358 | ||
29cbf458 FK |
359 | config GPIO_XGENE |
360 | bool "APM X-Gene GPIO controller support" | |
361 | depends on ARM64 && OF_GPIO | |
362 | help | |
363 | This driver is to support the GPIO block within the APM X-Gene SoC | |
364 | platform's generic flash controller. The GPIO pins are muxed with | |
365 | the generic flash controller's address and data pins. Say yes | |
366 | here to enable the GFC GPIO functionality. | |
367 | ||
0bcb6069 JL |
368 | config GPIO_XILINX |
369 | bool "Xilinx GPIO support" | |
78c7d8d2 | 370 | depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ |
0bcb6069 JL |
371 | help |
372 | Say yes here to support the Xilinx FPGA GPIO device | |
373 | ||
3242ba11 HK |
374 | config GPIO_ZYNQ |
375 | tristate "Xilinx Zynq GPIO support" | |
376 | depends on ARCH_ZYNQ | |
377 | select GPIOLIB_IRQCHIP | |
378 | help | |
379 | Say yes here to support Xilinx Zynq GPIO controller. | |
380 | ||
3b31d0ec BS |
381 | config GPIO_XTENSA |
382 | bool "Xtensa GPIO32 support" | |
383 | depends on XTENSA | |
a1a2bdec | 384 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
385 | depends on !SMP |
386 | help | |
387 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
388 | and EXPSTATE (output) ports | |
389 | ||
27fdd325 YY |
390 | config GPIO_VR41XX |
391 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
392 | depends on CPU_VR41XX | |
393 | help | |
394 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
395 | ||
be9b06b2 | 396 | config GPIO_SCH |
77820ffa | 397 | tristate "Intel SCH/TunnelCreek/Centerton GPIO" |
6cff9e2b | 398 | depends on PCI && X86 |
860fb8c1 | 399 | select MFD_CORE |
be9b06b2 DT |
400 | select LPC_SCH |
401 | help | |
77820ffa SH |
402 | Say yes here to support GPIO interface on Intel Poulsbo SCH, |
403 | Intel Tunnel Creek processor or Intel Centerton processor. | |
be9b06b2 DT |
404 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are |
405 | powered by the core power rail and are turned off during sleep | |
406 | modes (S3 and higher). The remaining four GPIOs are powered by | |
407 | the Intel SCH suspend power supply. These GPIOs remain | |
408 | active during S3. The suspend powered GPIOs can be used to wake the | |
409 | system from the Suspend-to-RAM state. | |
f04ddfcd DT |
410 | The Intel Tunnel Creek processor has 5 GPIOs powered by the |
411 | core power rail and 9 from suspend power supply. | |
77820ffa SH |
412 | The Intel Centerton processor has a total of 30 GPIO pins. |
413 | Twenty-one are powered by the core power rail and 9 from the | |
414 | suspend power supply. | |
be9b06b2 | 415 | |
6ed9f9c4 PT |
416 | config GPIO_ICH |
417 | tristate "Intel ICH GPIO" | |
418 | depends on PCI && X86 | |
419 | select MFD_CORE | |
420 | select LPC_ICH | |
421 | help | |
422 | Say yes here to support the GPIO functionality of a number of Intel | |
423 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
424 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
425 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
426 | ||
427 | If unsure, say N. | |
be9b06b2 | 428 | |
e9004f50 LW |
429 | config GPIO_IOP |
430 | tristate "Intel IOP GPIO" | |
431 | depends on ARM && (ARCH_IOP32X || ARCH_IOP33X) | |
432 | help | |
433 | Say yes here to support the GPIO functionality of a number of Intel | |
434 | IOP32X or IOP33X. | |
435 | ||
436 | If unsure, say N. | |
be9b06b2 | 437 | |
99ea2626 DD |
438 | config GPIO_VX855 |
439 | tristate "VIA VX855/VX875 GPIO" | |
0244ad00 | 440 | depends on PCI |
99ea2626 DD |
441 | select MFD_CORE |
442 | select MFD_VX855 | |
443 | help | |
444 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
445 | ||
446 | This driver provides common support for accessing the device, | |
447 | additional drivers must be enabled in order to use the | |
448 | functionality of the device. | |
449 | ||
6518bb69 MW |
450 | config GPIO_GE_FPGA |
451 | bool "GE FPGA based GPIO" | |
452 | depends on GE_FPGA | |
453 | help | |
454 | Support for common GPIO functionality provided on some GE Single Board | |
455 | Computers. | |
456 | ||
457 | This driver provides basic support (configure as input or output, read | |
458 | and write pin state) for GPIO implemented in a number of GE single | |
459 | board computers. | |
460 | ||
1d09aaa6 | 461 | config GPIO_LYNXPOINT |
d463c6ff | 462 | tristate "Intel Lynxpoint GPIO support" |
977d16b8 | 463 | depends on ACPI && X86 |
7f87210e | 464 | select GPIOLIB_IRQCHIP |
1d09aaa6 MN |
465 | help |
466 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
467 | Requires ACPI device enumeration code to set up a platform device. | |
468 | ||
ddb27f3b AL |
469 | config GPIO_GRGPIO |
470 | tristate "Aeroflex Gaisler GRGPIO support" | |
471 | depends on OF | |
472 | select GPIO_GENERIC | |
473 | select IRQ_DOMAIN | |
474 | help | |
475 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
476 | VHDL IP core library. | |
477 | ||
c6ce2b6b CR |
478 | config GPIO_TB10X |
479 | bool | |
90d16a43 | 480 | select GENERIC_IRQ_CHIP |
c6ce2b6b CR |
481 | select OF_GPIO |
482 | ||
a9c5fff5 DB |
483 | comment "I2C GPIO expanders:" |
484 | ||
31ba56f2 MB |
485 | config GPIO_ARIZONA |
486 | tristate "Wolfson Microelectronics Arizona class devices" | |
487 | depends on MFD_ARIZONA | |
488 | help | |
489 | Support for GPIOs on Wolfson Arizona class devices. | |
490 | ||
104fb1d5 ZL |
491 | config GPIO_CRYSTAL_COVE |
492 | tristate "GPIO support for Crystal Cove PMIC" | |
493 | depends on INTEL_SOC_PMIC | |
494 | select GPIOLIB_IRQCHIP | |
495 | help | |
496 | Support for GPIO pins on Crystal Cove PMIC. | |
497 | ||
498 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
499 | inside. | |
500 | ||
501 | This driver can also be built as a module. If so, the module will be | |
502 | called gpio-crystalcove. | |
503 | ||
0cc59b9d MK |
504 | config GPIO_LP3943 |
505 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
506 | depends on MFD_LP3943 | |
507 | help | |
508 | GPIO driver for LP3943 MFD. | |
509 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
510 | Open drain outputs are required for this usage. | |
511 | ||
e952805d WS |
512 | config GPIO_MAX7300 |
513 | tristate "Maxim MAX7300 GPIO expander" | |
514 | depends on I2C | |
515 | select GPIO_MAX730X | |
516 | help | |
2b861f4b | 517 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 518 | |
bbcd6d54 EM |
519 | config GPIO_MAX732X |
520 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
521 | depends on I2C | |
522 | help | |
523 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
524 | Port Expanders. Each IO port on these chips has a fixed role of | |
525 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
526 | Input and Output (designed by 'P'). The combinations are listed | |
527 | below: | |
528 | ||
529 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
530 | max7322 (4I4O), max7323 (4P4O) | |
531 | ||
532 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
533 | max7326 (4I12O), max7327 (4P12O) | |
534 | ||
535 | Board setup code must specify the model to use, and the start | |
536 | number for these GPIOs. | |
537 | ||
a80a0bbe MZ |
538 | config GPIO_MAX732X_IRQ |
539 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 540 | depends on GPIO_MAX732X=y |
a80a0bbe MZ |
541 | help |
542 | Say yes here to enable the max732x to be used as an interrupt | |
543 | controller. It requires the driver to be built in the kernel. | |
544 | ||
608589b1 | 545 | config GPIO_MC9S08DZ60 |
546 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 547 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 548 | help |
549 | Select this to enable the MC9S08DZ60 GPIO driver | |
550 | ||
f3dc3630 | 551 | config GPIO_PCA953X |
eb32b5aa | 552 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 553 | depends on I2C |
554 | help | |
7059d4b0 DB |
555 | Say yes here to provide access to several register-oriented |
556 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
557 | models include: | |
558 | ||
559 | 4 bits: pca9536, pca9537 | |
560 | ||
c29985dd | 561 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 562 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 563 | |
c29985dd AL |
564 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
565 | tca6416 | |
9e60fdcf | 566 | |
1e191695 AS |
567 | 24 bits: tca6424 |
568 | ||
eb32b5aa | 569 | 40 bits: pca9505, pca9698 |
1e191695 | 570 | |
89ea8bbe MZ |
571 | config GPIO_PCA953X_IRQ |
572 | bool "Interrupt controller support for PCA953x" | |
573 | depends on GPIO_PCA953X=y | |
7bcbce55 | 574 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
575 | help |
576 | Say yes here to enable the pca953x to be used as an interrupt | |
577 | controller. It requires the driver to be built in the kernel. | |
578 | ||
15fae37d | 579 | config GPIO_PCF857X |
1673ad52 | 580 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d | 581 | depends on I2C |
901acf5b | 582 | select IRQ_DOMAIN |
15fae37d DB |
583 | help |
584 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
585 | GPIO expanders used for additional digital outputs or inputs. | |
586 | Most of these parts are from NXP, though TI is a second source for | |
587 | some of them. Compatible models include: | |
588 | ||
589 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
590 | pca9670, pca9672, pca9674, pca9674a, |
591 | max7328, max7329 | |
15fae37d DB |
592 | |
593 | 16 bits: pcf8575, pcf8575c, pca8575, | |
594 | pca9671, pca9673, pca9675 | |
595 | ||
596 | Your board setup code will need to declare the expanders in | |
597 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
598 | can then be used from drivers and other kernel code, just like | |
599 | other GPIOs, but only accessible from task contexts. | |
600 | ||
601 | This driver provides an in-kernel interface to those GPIOs using | |
602 | platform-neutral GPIO calls. | |
603 | ||
e9fe32bc LD |
604 | config GPIO_RC5T583 |
605 | bool "RICOH RC5T583 GPIO" | |
606 | depends on MFD_RC5T583 | |
607 | help | |
608 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
609 | chip family. | |
610 | This driver provides the support for driving/reading the gpio pins | |
611 | of RC5T583 device through standard gpio library. | |
612 | ||
c34f16b7 GB |
613 | config GPIO_SX150X |
614 | bool "Semtech SX150x I2C GPIO expander" | |
615 | depends on I2C=y | |
616 | default n | |
617 | help | |
618 | Say yes here to provide support for Semtech SX150-series I2C | |
619 | GPIO expanders. Compatible models include: | |
620 | ||
621 | 8 bits: sx1508q | |
622 | 16 bits: sx1509q | |
623 | ||
03f822f5 RV |
624 | config GPIO_STMPE |
625 | bool "STMPE GPIOs" | |
626 | depends on MFD_STMPE | |
fe44e70d | 627 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
628 | help |
629 | This enables support for the GPIOs found on the STMPE I/O | |
630 | Expanders. | |
631 | ||
5238f7bc JC |
632 | config GPIO_STP_XWAY |
633 | bool "XWAY STP GPIOs" | |
634 | depends on SOC_XWAY | |
635 | help | |
636 | This enables support for the Serial To Parallel (STP) unit found on | |
637 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
638 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
639 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
640 | phy status. | |
641 | ||
f4e8afdc SI |
642 | config GPIO_TC3589X |
643 | bool "TC3589X GPIOs" | |
644 | depends on MFD_TC3589X | |
cf42f1cf | 645 | select GPIOLIB_IRQCHIP |
d88b25be | 646 | help |
f4e8afdc | 647 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
648 | I/O Expander. |
649 | ||
668a6cc7 MO |
650 | config GPIO_TPS65912 |
651 | tristate "TI TPS65912 GPIO" | |
652 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
653 | help | |
654 | This driver supports TPS65912 gpio chip | |
655 | ||
e9d35947 DB |
656 | config GPIO_TWL4030 |
657 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
658 | depends on TWL4030_CORE | |
659 | help | |
660 | Say yes here to access the GPIO signals of various multi-function | |
661 | power management chips from Texas Instruments. | |
662 | ||
70ffd691 PU |
663 | config GPIO_TWL6040 |
664 | tristate "TWL6040 GPO" | |
665 | depends on TWL6040_CORE | |
666 | help | |
667 | Say yes here to access the GPO signals of twl6040 | |
668 | audio chip from Texas Instruments. | |
669 | ||
e4b736f1 MB |
670 | config GPIO_WM831X |
671 | tristate "WM831x GPIOs" | |
672 | depends on MFD_WM831X | |
673 | help | |
674 | Say yes here to access the GPIO signals of WM831x power management | |
675 | chips from Wolfson Microelectronics. | |
676 | ||
38f6ce45 MB |
677 | config GPIO_WM8350 |
678 | tristate "WM8350 GPIOs" | |
679 | depends on MFD_WM8350 | |
680 | help | |
681 | Say yes here to access the GPIO signals of WM8350 power management | |
682 | chips from Wolfson Microelectronics. | |
683 | ||
2955c309 MB |
684 | config GPIO_WM8994 |
685 | tristate "WM8994 GPIOs" | |
686 | depends on MFD_WM8994 | |
687 | help | |
688 | Say yes here to access the GPIO signals of WM8994 audio hub | |
689 | CODECs from Wolfson Microelectronics. | |
690 | ||
ef72af40 MH |
691 | config GPIO_ADP5520 |
692 | tristate "GPIO Support for ADP5520 PMIC" | |
693 | depends on PMIC_ADP5520 | |
694 | help | |
695 | This option enables support for on-chip GPIO found | |
696 | on Analog Devices ADP5520 PMICs. | |
697 | ||
80884094 MH |
698 | config GPIO_ADP5588 |
699 | tristate "ADP5588 I2C GPIO expander" | |
700 | depends on I2C | |
701 | help | |
702 | This option enables support for 18 GPIOs found | |
703 | on Analog Devices ADP5588 GPIO Expanders. | |
80884094 | 704 | |
459773ae MH |
705 | config GPIO_ADP5588_IRQ |
706 | bool "Interrupt controller support for ADP5588" | |
707 | depends on GPIO_ADP5588=y | |
708 | help | |
709 | Say yes here to enable the adp5588 to be used as an interrupt | |
710 | controller. It requires the driver to be built in the kernel. | |
711 | ||
5e969a40 TR |
712 | config GPIO_ADNP |
713 | tristate "Avionic Design N-bit GPIO expander" | |
cb144fe8 | 714 | depends on I2C && OF_GPIO |
0752e169 | 715 | select GPIOLIB_IRQCHIP |
5e969a40 TR |
716 | help |
717 | This option enables support for N GPIOs found on Avionic Design | |
718 | I2C GPIO expanders. The register space will be extended by powers | |
e41e85cc | 719 | of two, so the controller will need to accommodate for that. For |
5e969a40 TR |
720 | example: if a controller provides 48 pins, 6 registers will be |
721 | enough to represent all pins, but the driver will assume a | |
722 | register layout for 64 pins (8 registers). | |
723 | ||
ff1d5c2f MB |
724 | comment "PCI GPIO expanders:" |
725 | ||
5f0a96b0 AS |
726 | config GPIO_CS5535 |
727 | tristate "AMD CS5535/CS5536 GPIO support" | |
5da82cac | 728 | depends on MFD_CS5535 |
5f0a96b0 AS |
729 | help |
730 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
731 | can be used for quite a number of things. The CS5535/6 is found on | |
732 | AMD Geode and Lemote Yeeloong devices. | |
733 | ||
734 | If unsure, say N. | |
735 | ||
ff1d5c2f MB |
736 | config GPIO_BT8XX |
737 | tristate "BT8XX GPIO abuser" | |
738 | depends on PCI && VIDEO_BT848=n | |
739 | help | |
22520edc | 740 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
741 | as a cheap PCI GPIO card. |
742 | ||
743 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
744 | ||
745 | The card needs to be physically altered for using it as a | |
746 | GPIO card. For more information on how to build a GPIO card | |
747 | from a BT8xx TV card, see the documentation file at | |
748 | Documentation/bt8xxgpio.txt | |
749 | ||
750 | If unsure, say N. | |
751 | ||
f942a7de DES |
752 | config GPIO_AMD8111 |
753 | tristate "AMD 8111 GPIO driver" | |
754 | depends on PCI | |
755 | help | |
756 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. | |
757 | ||
758 | Note, that usually system firmware/ACPI handles GPIO pins on their | |
759 | own and users might easily break their systems with uncarefull usage | |
760 | of this driver! | |
761 | ||
762 | If unsure, say N | |
763 | ||
84743ea3 DC |
764 | config GPIO_INTEL_MID |
765 | bool "Intel Mid GPIO support" | |
61ab3fe5 | 766 | depends on PCI && X86 |
fc346270 | 767 | select GPIOLIB_IRQCHIP |
8bf02617 | 768 | help |
84743ea3 | 769 | Say Y here to support Intel Mid GPIO. |
8bf02617 | 770 | |
04c17aa8 | 771 | config GPIO_PCH |
868fea05 | 772 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
3ff35cbc | 773 | depends on PCI && (X86_32 || COMPILE_TEST) |
38eb18a6 | 774 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
775 | help |
776 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
777 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
778 | This driver can access PCH GPIO device. | |
779 | ||
868fea05 TM |
780 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
781 | Output Hub), ML7223 and ML7831. | |
bc786cce | 782 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
783 | ML7831 IOH is for general purpose use. |
784 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
785 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 786 | |
49a36793 TM |
787 | config GPIO_ML_IOH |
788 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
789 | depends on PCI | |
54be5663 | 790 | select GENERIC_IRQ_CHIP |
49a36793 TM |
791 | help |
792 | ML7213 is companion chip for Intel Atom E6xx series. | |
793 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
794 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
795 | This driver can access the IOH's GPIO device. | |
796 | ||
b43ab901 SAS |
797 | config GPIO_SODAVILLE |
798 | bool "Intel Sodaville GPIO support" | |
3ffc9ceb | 799 | depends on X86 && PCI && OF |
b43ab901 SAS |
800 | select GPIO_GENERIC |
801 | select GENERIC_IRQ_CHIP | |
802 | help | |
803 | Say Y here to support Intel Sodaville GPIO. | |
804 | ||
35570ac6 RR |
805 | config GPIO_TIMBERDALE |
806 | bool "Support for timberdale GPIO IP" | |
0815c2c0 | 807 | depends on MFD_TIMBERDALE |
35570ac6 RR |
808 | ---help--- |
809 | Add support for the GPIO IP in the timberdale FPGA. | |
810 | ||
9956d02d FF |
811 | config GPIO_RDC321X |
812 | tristate "RDC R-321x GPIO support" | |
0244ad00 | 813 | depends on PCI |
e4be3cb7 | 814 | select MFD_CORE |
9956d02d FF |
815 | select MFD_RDC321X |
816 | help | |
817 | Support for the RDC R321x SoC GPIOs over southbridge | |
818 | PCI configuration space. | |
819 | ||
a9c5fff5 DB |
820 | comment "SPI GPIO expanders:" |
821 | ||
0c36ec31 JB |
822 | config GPIO_MAX7301 |
823 | tristate "Maxim MAX7301 GPIO expander" | |
824 | depends on SPI_MASTER | |
e952805d | 825 | select GPIO_MAX730X |
0c36ec31 | 826 | help |
e952805d | 827 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 828 | |
e58b9e27 | 829 | config GPIO_MCP23S08 |
752ad5e8 | 830 | tristate "Microchip MCP23xxx I/O expander" |
0f119a84 | 831 | depends on (SPI_MASTER && !I2C) || I2C |
e58b9e27 | 832 | help |
752ad5e8 PK |
833 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
834 | I/O expanders. | |
0b7bb77f | 835 | This provides a GPIO interface supporting inputs and outputs. |
4e47f91b | 836 | The I2C versions of the chips can be used as interrupt-controller. |
e58b9e27 | 837 | |
1e5db006 RR |
838 | config GPIO_MC33880 |
839 | tristate "Freescale MC33880 high-side/low-side switch" | |
840 | depends on SPI_MASTER | |
841 | help | |
842 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
843 | This provides GPIO interface supporting inputs and outputs. | |
844 | ||
ead6db08 MG |
845 | config GPIO_74X164 |
846 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
61e73804 | 847 | depends on SPI_MASTER && OF |
ead6db08 | 848 | help |
61e73804 AS |
849 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs |
850 | shift registers. This driver can be used to provide access | |
ead6db08 MG |
851 | to more gpio outputs. |
852 | ||
4cf8e53b MV |
853 | comment "AC97 GPIO expanders:" |
854 | ||
855 | config GPIO_UCB1400 | |
7d1815e1 | 856 | tristate "Philips UCB1400 GPIO" |
4cf8e53b MV |
857 | depends on UCB1400_CORE |
858 | help | |
859 | This enables support for the Philips UCB1400 GPIO pins. | |
860 | The UCB1400 is an AC97 audio codec. | |
861 | ||
d22fcde0 GR |
862 | comment "LPC GPIO expanders:" |
863 | ||
864 | config GPIO_KEMPLD | |
865 | tristate "Kontron ETX / COMexpress GPIO" | |
866 | depends on MFD_KEMPLD | |
867 | help | |
868 | This enables support for the PLD GPIO interface on some Kontron ETX | |
869 | and COMexpress (ETXexpress) modules. | |
870 | ||
871 | This driver can also be built as a module. If so, the module will be | |
872 | called gpio-kempld. | |
873 | ||
800e69fb IS |
874 | comment "MODULbus GPIO expanders:" |
875 | ||
876 | config GPIO_JANZ_TTL | |
877 | tristate "Janz VMOD-TTL Digital IO Module" | |
878 | depends on MFD_JANZ_CMODIO | |
879 | help | |
880 | This enables support for the Janz VMOD-TTL Digital IO module. | |
881 | This driver provides support for driving the pins in output | |
882 | mode only. Input mode is not supported. | |
883 | ||
3d50a278 LD |
884 | config GPIO_PALMAS |
885 | bool "TI PALMAS series PMICs GPIO" | |
886 | depends on MFD_PALMAS | |
887 | help | |
888 | Select this option to enable GPIO driver for the TI PALMAS | |
889 | series chip family. | |
890 | ||
72bd9860 LD |
891 | config GPIO_TPS6586X |
892 | bool "TPS6586X GPIO" | |
893 | depends on MFD_TPS6586X | |
894 | help | |
895 | Select this option to enable GPIO driver for the TPS6586X | |
896 | chip family. | |
897 | ||
83545d83 JEC |
898 | config GPIO_TPS65910 |
899 | bool "TPS65910 GPIO" | |
900 | depends on MFD_TPS65910 | |
901 | help | |
902 | Select this option to enable GPIO driver for the TPS65910 | |
903 | chip family. | |
25cf2507 MN |
904 | |
905 | config GPIO_MSIC | |
906 | bool "Intel MSIC mixed signal gpio support" | |
907 | depends on MFD_INTEL_MSIC | |
908 | help | |
909 | Enable support for GPIO on intel MSIC controllers found in | |
910 | intel MID devices | |
911 | ||
757651e3 MM |
912 | config GPIO_BCM_KONA |
913 | bool "Broadcom Kona GPIO" | |
7b31997a | 914 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) |
757651e3 MM |
915 | help |
916 | Turn on GPIO support for Broadcom "Kona" chips. | |
917 | ||
9d5b72de LP |
918 | comment "USB GPIO expanders:" |
919 | ||
920 | config GPIO_VIPERBOARD | |
921 | tristate "Viperboard GPIO a & b support" | |
922 | depends on MFD_VIPERBOARD && USB | |
923 | help | |
924 | Say yes here to access the GPIO signals of Nano River | |
925 | Technologies Viperboard. There are two GPIO chips on the | |
926 | board: gpioa and gpiob. | |
927 | See viperboard API specification and Nano | |
928 | River Tech's viperboard.h for detailed meaning | |
929 | of the module parameters. | |
930 | ||
6732127f DB |
931 | config GPIO_DLN2 |
932 | tristate "Diolan DLN2 GPIO support" | |
933 | depends on MFD_DLN2 | |
934 | select GPIOLIB_IRQCHIP | |
935 | ||
936 | help | |
937 | Select this option to enable GPIO driver for the Diolan DLN2 | |
938 | board. | |
939 | ||
940 | This driver can also be built as a module. If so, the module | |
941 | will be called gpio-dln2. | |
942 | ||
7444a72e | 943 | endif |