Commit | Line | Data |
---|---|---|
2874c5fd | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
914b881f CC |
2 | /* |
3 | * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches | |
4 | * | |
5 | * Copyright (c) 2014 Samsung Electronics Co., Ltd | |
6 | * Author: Chanwoo Choi <cw00.choi@samsung.com> | |
914b881f CC |
7 | */ |
8 | ||
9 | #include <linux/err.h> | |
10 | #include <linux/i2c.h> | |
914b881f CC |
11 | #include <linux/interrupt.h> |
12 | #include <linux/irqdomain.h> | |
13 | #include <linux/kernel.h> | |
14 | #include <linux/module.h> | |
15 | #include <linux/platform_device.h> | |
16 | #include <linux/regmap.h> | |
17 | #include <linux/slab.h> | |
176aa360 | 18 | #include <linux/extcon-provider.h> |
ca2a07e4 CC |
19 | |
20 | #include "extcon-sm5502.h" | |
914b881f | 21 | |
e1954452 CC |
22 | #define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ |
23 | ||
914b881f CC |
24 | struct muic_irq { |
25 | unsigned int irq; | |
26 | const char *name; | |
27 | unsigned int virq; | |
28 | }; | |
29 | ||
30 | struct reg_data { | |
31 | u8 reg; | |
32 | unsigned int val; | |
33 | bool invert; | |
34 | }; | |
35 | ||
36 | struct sm5502_muic_info { | |
37 | struct device *dev; | |
38 | struct extcon_dev *edev; | |
39 | ||
40 | struct i2c_client *i2c; | |
41 | struct regmap *regmap; | |
42 | ||
f33c056d | 43 | const struct sm5502_type *type; |
914b881f | 44 | struct regmap_irq_chip_data *irq_data; |
914b881f CC |
45 | int irq; |
46 | bool irq_attach; | |
47 | bool irq_detach; | |
48 | struct work_struct irq_work; | |
49 | ||
914b881f | 50 | struct mutex mutex; |
e1954452 CC |
51 | |
52 | /* | |
53 | * Use delayed workqueue to detect cable state and then | |
54 | * notify cable state to notifiee/platform through uevent. | |
55 | * After completing the booting of platform, the extcon provider | |
56 | * driver should notify cable state to upper layer. | |
57 | */ | |
58 | struct delayed_work wq_detcable; | |
914b881f CC |
59 | }; |
60 | ||
f33c056d SG |
61 | struct sm5502_type { |
62 | struct muic_irq *muic_irqs; | |
63 | unsigned int num_muic_irqs; | |
64 | const struct regmap_irq_chip *irq_chip; | |
65 | ||
66 | struct reg_data *reg_data; | |
67 | unsigned int num_reg_data; | |
68 | ||
d97c0ff5 | 69 | unsigned int otg_dev_type1; |
f33c056d SG |
70 | int (*parse_irq)(struct sm5502_muic_info *info, int irq_type); |
71 | }; | |
72 | ||
914b881f CC |
73 | /* Default value of SM5502 register to bring up MUIC device. */ |
74 | static struct reg_data sm5502_reg_data[] = { | |
75 | { | |
69426350 SG |
76 | .reg = SM5502_REG_RESET, |
77 | .val = SM5502_REG_RESET_MASK, | |
78 | .invert = true, | |
79 | }, { | |
914b881f CC |
80 | .reg = SM5502_REG_CONTROL, |
81 | .val = SM5502_REG_CONTROL_MASK_INT_MASK, | |
82 | .invert = false, | |
83 | }, { | |
84 | .reg = SM5502_REG_INTMASK1, | |
85 | .val = SM5502_REG_INTM1_KP_MASK | |
86 | | SM5502_REG_INTM1_LKP_MASK | |
87 | | SM5502_REG_INTM1_LKR_MASK, | |
88 | .invert = true, | |
89 | }, { | |
90 | .reg = SM5502_REG_INTMASK2, | |
91 | .val = SM5502_REG_INTM2_VBUS_DET_MASK | |
92 | | SM5502_REG_INTM2_REV_ACCE_MASK | |
93 | | SM5502_REG_INTM2_ADC_CHG_MASK | |
94 | | SM5502_REG_INTM2_STUCK_KEY_MASK | |
95 | | SM5502_REG_INTM2_STUCK_KEY_RCV_MASK | |
96 | | SM5502_REG_INTM2_MHL_MASK, | |
97 | .invert = true, | |
98 | }, | |
914b881f CC |
99 | }; |
100 | ||
d97c0ff5 SG |
101 | /* Default value of SM5504 register to bring up MUIC device. */ |
102 | static struct reg_data sm5504_reg_data[] = { | |
103 | { | |
104 | .reg = SM5502_REG_RESET, | |
105 | .val = SM5502_REG_RESET_MASK, | |
106 | .invert = true, | |
107 | }, { | |
108 | .reg = SM5502_REG_INTMASK1, | |
109 | .val = SM5504_REG_INTM1_ATTACH_MASK | |
110 | | SM5504_REG_INTM1_DETACH_MASK, | |
111 | .invert = false, | |
112 | }, { | |
113 | .reg = SM5502_REG_INTMASK2, | |
114 | .val = SM5504_REG_INTM2_RID_CHG_MASK | |
115 | | SM5504_REG_INTM2_UVLO_MASK | |
116 | | SM5504_REG_INTM2_POR_MASK, | |
117 | .invert = true, | |
118 | }, { | |
119 | .reg = SM5502_REG_CONTROL, | |
120 | .val = SM5502_REG_CONTROL_MANUAL_SW_MASK | |
121 | | SM5504_REG_CONTROL_CHGTYP_MASK | |
122 | | SM5504_REG_CONTROL_USBCHDEN_MASK | |
123 | | SM5504_REG_CONTROL_ADC_EN_MASK, | |
124 | .invert = true, | |
125 | }, | |
126 | }; | |
127 | ||
914b881f | 128 | /* List of detectable cables */ |
73b6ecdb | 129 | static const unsigned int sm5502_extcon_cable[] = { |
2a9de9c0 CC |
130 | EXTCON_USB, |
131 | EXTCON_USB_HOST, | |
8b45b6a0 | 132 | EXTCON_CHG_USB_SDP, |
11eecf91 | 133 | EXTCON_CHG_USB_DCP, |
2a9de9c0 | 134 | EXTCON_NONE, |
914b881f CC |
135 | }; |
136 | ||
137 | /* Define supported accessory type */ | |
138 | enum sm5502_muic_acc_type { | |
139 | SM5502_MUIC_ADC_GROUND = 0x0, | |
140 | SM5502_MUIC_ADC_SEND_END_BUTTON, | |
141 | SM5502_MUIC_ADC_REMOTE_S1_BUTTON, | |
142 | SM5502_MUIC_ADC_REMOTE_S2_BUTTON, | |
143 | SM5502_MUIC_ADC_REMOTE_S3_BUTTON, | |
144 | SM5502_MUIC_ADC_REMOTE_S4_BUTTON, | |
145 | SM5502_MUIC_ADC_REMOTE_S5_BUTTON, | |
146 | SM5502_MUIC_ADC_REMOTE_S6_BUTTON, | |
147 | SM5502_MUIC_ADC_REMOTE_S7_BUTTON, | |
148 | SM5502_MUIC_ADC_REMOTE_S8_BUTTON, | |
149 | SM5502_MUIC_ADC_REMOTE_S9_BUTTON, | |
150 | SM5502_MUIC_ADC_REMOTE_S10_BUTTON, | |
151 | SM5502_MUIC_ADC_REMOTE_S11_BUTTON, | |
152 | SM5502_MUIC_ADC_REMOTE_S12_BUTTON, | |
153 | SM5502_MUIC_ADC_RESERVED_ACC_1, | |
154 | SM5502_MUIC_ADC_RESERVED_ACC_2, | |
155 | SM5502_MUIC_ADC_RESERVED_ACC_3, | |
156 | SM5502_MUIC_ADC_RESERVED_ACC_4, | |
157 | SM5502_MUIC_ADC_RESERVED_ACC_5, | |
158 | SM5502_MUIC_ADC_AUDIO_TYPE2, | |
159 | SM5502_MUIC_ADC_PHONE_POWERED_DEV, | |
160 | SM5502_MUIC_ADC_TTY_CONVERTER, | |
161 | SM5502_MUIC_ADC_UART_CABLE, | |
162 | SM5502_MUIC_ADC_TYPE1_CHARGER, | |
163 | SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB, | |
164 | SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB, | |
165 | SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE, | |
166 | SM5502_MUIC_ADC_TYPE2_CHARGER, | |
167 | SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART, | |
168 | SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART, | |
169 | SM5502_MUIC_ADC_AUDIO_TYPE1, | |
170 | SM5502_MUIC_ADC_OPEN = 0x1f, | |
171 | ||
af57fa4d SR |
172 | /* |
173 | * The below accessories have same ADC value (0x1f or 0x1e). | |
174 | * So, Device type1 is used to separate specific accessory. | |
175 | */ | |
914b881f CC |
176 | /* |---------|--ADC| */ |
177 | /* | [7:5]|[4:0]| */ | |
178 | SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* | 001|11110| */ | |
179 | SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e, /* | 010|11110| */ | |
180 | /* |Dev Type1|--ADC| */ | |
e3f60329 | 181 | SM5502_MUIC_ADC_GROUND_USB_OTG = 0x80, /* | 100|00000| */ |
914b881f CC |
182 | SM5502_MUIC_ADC_OPEN_USB = 0x5f, /* | 010|11111| */ |
183 | SM5502_MUIC_ADC_OPEN_TA = 0xdf, /* | 110|11111| */ | |
184 | SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff, /* | 111|11111| */ | |
185 | }; | |
186 | ||
187 | /* List of supported interrupt for SM5502 */ | |
188 | static struct muic_irq sm5502_muic_irqs[] = { | |
189 | { SM5502_IRQ_INT1_ATTACH, "muic-attach" }, | |
190 | { SM5502_IRQ_INT1_DETACH, "muic-detach" }, | |
191 | { SM5502_IRQ_INT1_KP, "muic-kp" }, | |
192 | { SM5502_IRQ_INT1_LKP, "muic-lkp" }, | |
193 | { SM5502_IRQ_INT1_LKR, "muic-lkr" }, | |
194 | { SM5502_IRQ_INT1_OVP_EVENT, "muic-ovp-event" }, | |
195 | { SM5502_IRQ_INT1_OCP_EVENT, "muic-ocp-event" }, | |
196 | { SM5502_IRQ_INT1_OVP_OCP_DIS, "muic-ovp-ocp-dis" }, | |
197 | { SM5502_IRQ_INT2_VBUS_DET, "muic-vbus-det" }, | |
198 | { SM5502_IRQ_INT2_REV_ACCE, "muic-rev-acce" }, | |
199 | { SM5502_IRQ_INT2_ADC_CHG, "muic-adc-chg" }, | |
200 | { SM5502_IRQ_INT2_STUCK_KEY, "muic-stuck-key" }, | |
201 | { SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" }, | |
202 | { SM5502_IRQ_INT2_MHL, "muic-mhl" }, | |
203 | }; | |
204 | ||
205 | /* Define interrupt list of SM5502 to register regmap_irq */ | |
206 | static const struct regmap_irq sm5502_irqs[] = { | |
207 | /* INT1 interrupts */ | |
208 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, }, | |
209 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, }, | |
210 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, }, | |
211 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, }, | |
212 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, }, | |
213 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, }, | |
214 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, }, | |
215 | { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, }, | |
216 | ||
217 | /* INT2 interrupts */ | |
218 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,}, | |
219 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, }, | |
220 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, }, | |
221 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, }, | |
222 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, }, | |
223 | { .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, }, | |
224 | }; | |
225 | ||
226 | static const struct regmap_irq_chip sm5502_muic_irq_chip = { | |
227 | .name = "sm5502", | |
228 | .status_base = SM5502_REG_INT1, | |
229 | .mask_base = SM5502_REG_INTMASK1, | |
914b881f CC |
230 | .num_regs = 2, |
231 | .irqs = sm5502_irqs, | |
232 | .num_irqs = ARRAY_SIZE(sm5502_irqs), | |
233 | }; | |
234 | ||
d97c0ff5 SG |
235 | /* List of supported interrupt for SM5504 */ |
236 | static struct muic_irq sm5504_muic_irqs[] = { | |
237 | { SM5504_IRQ_INT1_ATTACH, "muic-attach" }, | |
238 | { SM5504_IRQ_INT1_DETACH, "muic-detach" }, | |
239 | { SM5504_IRQ_INT1_CHG_DET, "muic-chg-det" }, | |
240 | { SM5504_IRQ_INT1_DCD_OUT, "muic-dcd-out" }, | |
241 | { SM5504_IRQ_INT1_OVP_EVENT, "muic-ovp-event" }, | |
242 | { SM5504_IRQ_INT1_CONNECT, "muic-connect" }, | |
243 | { SM5504_IRQ_INT1_ADC_CHG, "muic-adc-chg" }, | |
244 | { SM5504_IRQ_INT2_RID_CHG, "muic-rid-chg" }, | |
245 | { SM5504_IRQ_INT2_UVLO, "muic-uvlo" }, | |
246 | { SM5504_IRQ_INT2_POR, "muic-por" }, | |
247 | { SM5504_IRQ_INT2_OVP_FET, "muic-ovp-fet" }, | |
248 | { SM5504_IRQ_INT2_OCP_LATCH, "muic-ocp-latch" }, | |
249 | { SM5504_IRQ_INT2_OCP_EVENT, "muic-ocp-event" }, | |
250 | { SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" }, | |
251 | }; | |
252 | ||
253 | /* Define interrupt list of SM5504 to register regmap_irq */ | |
254 | static const struct regmap_irq sm5504_irqs[] = { | |
255 | /* INT1 interrupts */ | |
256 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, }, | |
257 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, }, | |
258 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, }, | |
259 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, }, | |
260 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, }, | |
261 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, }, | |
262 | { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, }, | |
263 | ||
264 | /* INT2 interrupts */ | |
265 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,}, | |
266 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, }, | |
267 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, }, | |
268 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, }, | |
269 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, }, | |
270 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, }, | |
271 | { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, }, | |
272 | }; | |
273 | ||
274 | static const struct regmap_irq_chip sm5504_muic_irq_chip = { | |
275 | .name = "sm5504", | |
276 | .status_base = SM5502_REG_INT1, | |
277 | .mask_base = SM5502_REG_INTMASK1, | |
d97c0ff5 SG |
278 | .num_regs = 2, |
279 | .irqs = sm5504_irqs, | |
280 | .num_irqs = ARRAY_SIZE(sm5504_irqs), | |
281 | }; | |
282 | ||
914b881f CC |
283 | /* Define regmap configuration of SM5502 for I2C communication */ |
284 | static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg) | |
285 | { | |
286 | switch (reg) { | |
287 | case SM5502_REG_INTMASK1: | |
288 | case SM5502_REG_INTMASK2: | |
289 | return true; | |
290 | default: | |
291 | break; | |
292 | } | |
293 | return false; | |
294 | } | |
295 | ||
296 | static const struct regmap_config sm5502_muic_regmap_config = { | |
297 | .reg_bits = 8, | |
298 | .val_bits = 8, | |
299 | .volatile_reg = sm5502_muic_volatile_reg, | |
300 | .max_register = SM5502_REG_END, | |
301 | }; | |
302 | ||
a75fed2e CC |
303 | /* Change DM_CON/DP_CON/VBUSIN switch according to cable type */ |
304 | static int sm5502_muic_set_path(struct sm5502_muic_info *info, | |
305 | unsigned int con_sw, unsigned int vbus_sw, | |
306 | bool attached) | |
307 | { | |
308 | int ret; | |
309 | ||
310 | if (!attached) { | |
311 | con_sw = DM_DP_SWITCH_OPEN; | |
312 | vbus_sw = VBUSIN_SWITCH_OPEN; | |
313 | } | |
314 | ||
315 | switch (con_sw) { | |
316 | case DM_DP_SWITCH_OPEN: | |
317 | case DM_DP_SWITCH_USB: | |
318 | case DM_DP_SWITCH_AUDIO: | |
319 | case DM_DP_SWITCH_UART: | |
320 | ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, | |
321 | SM5502_REG_MANUAL_SW1_DP_MASK | | |
322 | SM5502_REG_MANUAL_SW1_DM_MASK, | |
323 | con_sw); | |
324 | if (ret < 0) { | |
325 | dev_err(info->dev, | |
326 | "cannot update DM_CON/DP_CON switch\n"); | |
327 | return ret; | |
328 | } | |
329 | break; | |
330 | default: | |
331 | dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n", | |
332 | con_sw); | |
333 | return -EINVAL; | |
2ddf50a7 | 334 | } |
a75fed2e CC |
335 | |
336 | switch (vbus_sw) { | |
337 | case VBUSIN_SWITCH_OPEN: | |
338 | case VBUSIN_SWITCH_VBUSOUT: | |
339 | case VBUSIN_SWITCH_MIC: | |
340 | case VBUSIN_SWITCH_VBUSOUT_WITH_USB: | |
341 | ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, | |
342 | SM5502_REG_MANUAL_SW1_VBUSIN_MASK, | |
343 | vbus_sw); | |
344 | if (ret < 0) { | |
345 | dev_err(info->dev, | |
346 | "cannot update VBUSIN switch\n"); | |
347 | return ret; | |
348 | } | |
349 | break; | |
350 | default: | |
351 | dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw); | |
352 | return -EINVAL; | |
2ddf50a7 | 353 | } |
a75fed2e CC |
354 | |
355 | return 0; | |
356 | } | |
357 | ||
914b881f CC |
358 | /* Return cable type of attached or detached accessories */ |
359 | static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info) | |
360 | { | |
ddd1bbba | 361 | unsigned int cable_type, adc, dev_type1; |
914b881f CC |
362 | int ret; |
363 | ||
364 | /* Read ADC value according to external cable or button */ | |
365 | ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc); | |
366 | if (ret) { | |
367 | dev_err(info->dev, "failed to read ADC register\n"); | |
368 | return ret; | |
369 | } | |
370 | ||
371 | /* | |
372 | * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't | |
373 | * connected with to MUIC device. | |
374 | */ | |
0ccc7955 | 375 | cable_type = adc & SM5502_REG_ADC_MASK; |
914b881f CC |
376 | |
377 | switch (cable_type) { | |
378 | case SM5502_MUIC_ADC_GROUND: | |
e3f60329 NT |
379 | ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1, |
380 | &dev_type1); | |
381 | if (ret) { | |
382 | dev_err(info->dev, "failed to read DEV_TYPE1 reg\n"); | |
383 | return ret; | |
384 | } | |
385 | ||
d97c0ff5 | 386 | if (dev_type1 == info->type->otg_dev_type1) { |
e3f60329 | 387 | cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG; |
d97c0ff5 | 388 | } else { |
e3f60329 NT |
389 | dev_dbg(info->dev, |
390 | "cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n", | |
391 | adc, dev_type1); | |
392 | return -EINVAL; | |
393 | } | |
394 | break; | |
914b881f CC |
395 | case SM5502_MUIC_ADC_SEND_END_BUTTON: |
396 | case SM5502_MUIC_ADC_REMOTE_S1_BUTTON: | |
397 | case SM5502_MUIC_ADC_REMOTE_S2_BUTTON: | |
398 | case SM5502_MUIC_ADC_REMOTE_S3_BUTTON: | |
399 | case SM5502_MUIC_ADC_REMOTE_S4_BUTTON: | |
400 | case SM5502_MUIC_ADC_REMOTE_S5_BUTTON: | |
401 | case SM5502_MUIC_ADC_REMOTE_S6_BUTTON: | |
402 | case SM5502_MUIC_ADC_REMOTE_S7_BUTTON: | |
403 | case SM5502_MUIC_ADC_REMOTE_S8_BUTTON: | |
404 | case SM5502_MUIC_ADC_REMOTE_S9_BUTTON: | |
405 | case SM5502_MUIC_ADC_REMOTE_S10_BUTTON: | |
406 | case SM5502_MUIC_ADC_REMOTE_S11_BUTTON: | |
407 | case SM5502_MUIC_ADC_REMOTE_S12_BUTTON: | |
408 | case SM5502_MUIC_ADC_RESERVED_ACC_1: | |
409 | case SM5502_MUIC_ADC_RESERVED_ACC_2: | |
410 | case SM5502_MUIC_ADC_RESERVED_ACC_3: | |
411 | case SM5502_MUIC_ADC_RESERVED_ACC_4: | |
412 | case SM5502_MUIC_ADC_RESERVED_ACC_5: | |
413 | case SM5502_MUIC_ADC_AUDIO_TYPE2: | |
414 | case SM5502_MUIC_ADC_PHONE_POWERED_DEV: | |
415 | case SM5502_MUIC_ADC_TTY_CONVERTER: | |
416 | case SM5502_MUIC_ADC_UART_CABLE: | |
417 | case SM5502_MUIC_ADC_TYPE1_CHARGER: | |
418 | case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB: | |
419 | case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB: | |
420 | case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE: | |
421 | case SM5502_MUIC_ADC_TYPE2_CHARGER: | |
422 | case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART: | |
423 | case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART: | |
424 | break; | |
425 | case SM5502_MUIC_ADC_AUDIO_TYPE1: | |
426 | /* | |
427 | * Check whether cable type is | |
428 | * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE | |
429 | * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END | |
430 | * by using Button event. | |
431 | */ | |
432 | break; | |
433 | case SM5502_MUIC_ADC_OPEN: | |
434 | ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1, | |
435 | &dev_type1); | |
436 | if (ret) { | |
437 | dev_err(info->dev, "failed to read DEV_TYPE1 reg\n"); | |
438 | return ret; | |
439 | } | |
440 | ||
d97c0ff5 SG |
441 | if (dev_type1 == info->type->otg_dev_type1) { |
442 | cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG; | |
443 | break; | |
444 | } | |
445 | ||
914b881f CC |
446 | switch (dev_type1) { |
447 | case SM5502_REG_DEV_TYPE1_USB_SDP_MASK: | |
448 | cable_type = SM5502_MUIC_ADC_OPEN_USB; | |
449 | break; | |
450 | case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK: | |
451 | cable_type = SM5502_MUIC_ADC_OPEN_TA; | |
452 | break; | |
914b881f CC |
453 | default: |
454 | dev_dbg(info->dev, | |
34825e51 CC |
455 | "cannot identify the cable type: adc(0x%x)\n", |
456 | adc); | |
914b881f | 457 | return -EINVAL; |
2ddf50a7 | 458 | } |
914b881f CC |
459 | break; |
460 | default: | |
461 | dev_err(info->dev, | |
462 | "failed to identify the cable type: adc(0x%x)\n", adc); | |
463 | return -EINVAL; | |
2ddf50a7 | 464 | } |
914b881f CC |
465 | |
466 | return cable_type; | |
467 | } | |
468 | ||
469 | static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, | |
470 | bool attached) | |
471 | { | |
472 | static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND; | |
914b881f | 473 | unsigned int cable_type = SM5502_MUIC_ADC_GROUND; |
a75fed2e CC |
474 | unsigned int con_sw = DM_DP_SWITCH_OPEN; |
475 | unsigned int vbus_sw = VBUSIN_SWITCH_OPEN; | |
73b6ecdb | 476 | unsigned int id; |
a75fed2e | 477 | int ret; |
914b881f | 478 | |
914b881f CC |
479 | /* Get the type of attached or detached cable */ |
480 | if (attached) | |
481 | cable_type = sm5502_muic_get_cable_type(info); | |
fbae30d8 | 482 | else |
914b881f CC |
483 | cable_type = prev_cable_type; |
484 | prev_cable_type = cable_type; | |
485 | ||
486 | switch (cable_type) { | |
487 | case SM5502_MUIC_ADC_OPEN_USB: | |
2a9de9c0 | 488 | id = EXTCON_USB; |
a75fed2e CC |
489 | con_sw = DM_DP_SWITCH_USB; |
490 | vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB; | |
914b881f CC |
491 | break; |
492 | case SM5502_MUIC_ADC_OPEN_TA: | |
11eecf91 | 493 | id = EXTCON_CHG_USB_DCP; |
a75fed2e CC |
494 | con_sw = DM_DP_SWITCH_OPEN; |
495 | vbus_sw = VBUSIN_SWITCH_VBUSOUT; | |
914b881f | 496 | break; |
e3f60329 | 497 | case SM5502_MUIC_ADC_GROUND_USB_OTG: |
914b881f | 498 | case SM5502_MUIC_ADC_OPEN_USB_OTG: |
2a9de9c0 | 499 | id = EXTCON_USB_HOST; |
a75fed2e CC |
500 | con_sw = DM_DP_SWITCH_USB; |
501 | vbus_sw = VBUSIN_SWITCH_OPEN; | |
e1954452 | 502 | break; |
914b881f CC |
503 | default: |
504 | dev_dbg(info->dev, | |
505 | "cannot handle this cable_type (0x%x)\n", cable_type); | |
506 | return 0; | |
2ddf50a7 | 507 | } |
914b881f | 508 | |
a75fed2e CC |
509 | /* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */ |
510 | ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached); | |
511 | if (ret < 0) | |
512 | return ret; | |
513 | ||
514 | /* Change the state of external accessory */ | |
8670b459 | 515 | extcon_set_state_sync(info->edev, id, attached); |
8b45b6a0 | 516 | if (id == EXTCON_USB) |
8670b459 | 517 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, |
8b45b6a0 | 518 | attached); |
914b881f CC |
519 | |
520 | return 0; | |
521 | } | |
522 | ||
523 | static void sm5502_muic_irq_work(struct work_struct *work) | |
524 | { | |
525 | struct sm5502_muic_info *info = container_of(work, | |
526 | struct sm5502_muic_info, irq_work); | |
527 | int ret = 0; | |
528 | ||
529 | if (!info->edev) | |
530 | return; | |
531 | ||
532 | mutex_lock(&info->mutex); | |
533 | ||
534 | /* Detect attached or detached cables */ | |
535 | if (info->irq_attach) { | |
536 | ret = sm5502_muic_cable_handler(info, true); | |
537 | info->irq_attach = false; | |
538 | } | |
539 | if (info->irq_detach) { | |
540 | ret = sm5502_muic_cable_handler(info, false); | |
541 | info->irq_detach = false; | |
542 | } | |
543 | ||
544 | if (ret < 0) | |
545 | dev_err(info->dev, "failed to handle MUIC interrupt\n"); | |
546 | ||
547 | mutex_unlock(&info->mutex); | |
914b881f CC |
548 | } |
549 | ||
550 | /* | |
551 | * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0. | |
552 | * Returns -ESRCH if irq_type does not match registered IRQ for this dev type. | |
553 | */ | |
554 | static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type) | |
555 | { | |
556 | switch (irq_type) { | |
557 | case SM5502_IRQ_INT1_ATTACH: | |
558 | info->irq_attach = true; | |
559 | break; | |
560 | case SM5502_IRQ_INT1_DETACH: | |
561 | info->irq_detach = true; | |
562 | break; | |
563 | case SM5502_IRQ_INT1_KP: | |
564 | case SM5502_IRQ_INT1_LKP: | |
565 | case SM5502_IRQ_INT1_LKR: | |
566 | case SM5502_IRQ_INT1_OVP_EVENT: | |
567 | case SM5502_IRQ_INT1_OCP_EVENT: | |
568 | case SM5502_IRQ_INT1_OVP_OCP_DIS: | |
569 | case SM5502_IRQ_INT2_VBUS_DET: | |
570 | case SM5502_IRQ_INT2_REV_ACCE: | |
571 | case SM5502_IRQ_INT2_ADC_CHG: | |
572 | case SM5502_IRQ_INT2_STUCK_KEY: | |
573 | case SM5502_IRQ_INT2_STUCK_KEY_RCV: | |
574 | case SM5502_IRQ_INT2_MHL: | |
575 | default: | |
576 | break; | |
577 | } | |
578 | ||
579 | return 0; | |
580 | } | |
581 | ||
d97c0ff5 SG |
582 | static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type) |
583 | { | |
584 | switch (irq_type) { | |
585 | case SM5504_IRQ_INT1_ATTACH: | |
586 | info->irq_attach = true; | |
587 | break; | |
588 | case SM5504_IRQ_INT1_DETACH: | |
589 | info->irq_detach = true; | |
590 | break; | |
591 | case SM5504_IRQ_INT1_CHG_DET: | |
592 | case SM5504_IRQ_INT1_DCD_OUT: | |
593 | case SM5504_IRQ_INT1_OVP_EVENT: | |
594 | case SM5504_IRQ_INT1_CONNECT: | |
595 | case SM5504_IRQ_INT1_ADC_CHG: | |
596 | case SM5504_IRQ_INT2_RID_CHG: | |
597 | case SM5504_IRQ_INT2_UVLO: | |
598 | case SM5504_IRQ_INT2_POR: | |
599 | case SM5504_IRQ_INT2_OVP_FET: | |
600 | case SM5504_IRQ_INT2_OCP_LATCH: | |
601 | case SM5504_IRQ_INT2_OCP_EVENT: | |
602 | case SM5504_IRQ_INT2_OVP_OCP_EVENT: | |
603 | default: | |
604 | break; | |
605 | } | |
606 | ||
607 | return 0; | |
608 | } | |
609 | ||
914b881f CC |
610 | static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) |
611 | { | |
612 | struct sm5502_muic_info *info = data; | |
613 | int i, irq_type = -1, ret; | |
614 | ||
f33c056d SG |
615 | for (i = 0; i < info->type->num_muic_irqs; i++) |
616 | if (irq == info->type->muic_irqs[i].virq) | |
617 | irq_type = info->type->muic_irqs[i].irq; | |
914b881f | 618 | |
f33c056d | 619 | ret = info->type->parse_irq(info, irq_type); |
914b881f CC |
620 | if (ret < 0) { |
621 | dev_warn(info->dev, "cannot handle is interrupt:%d\n", | |
622 | irq_type); | |
623 | return IRQ_HANDLED; | |
624 | } | |
625 | schedule_work(&info->irq_work); | |
626 | ||
627 | return IRQ_HANDLED; | |
628 | } | |
629 | ||
e1954452 CC |
630 | static void sm5502_muic_detect_cable_wq(struct work_struct *work) |
631 | { | |
632 | struct sm5502_muic_info *info = container_of(to_delayed_work(work), | |
633 | struct sm5502_muic_info, wq_detcable); | |
634 | int ret; | |
635 | ||
636 | /* Notify the state of connector cable or not */ | |
637 | ret = sm5502_muic_cable_handler(info, true); | |
638 | if (ret < 0) | |
639 | dev_warn(info->dev, "failed to detect cable state\n"); | |
640 | } | |
641 | ||
914b881f CC |
642 | static void sm5502_init_dev_type(struct sm5502_muic_info *info) |
643 | { | |
644 | unsigned int reg_data, vendor_id, version_id; | |
645 | int i, ret; | |
646 | ||
647 | /* To test I2C, Print version_id and vendor_id of SM5502 */ | |
648 | ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, ®_data); | |
649 | if (ret) { | |
650 | dev_err(info->dev, | |
651 | "failed to read DEVICE_ID register: %d\n", ret); | |
652 | return; | |
653 | } | |
654 | ||
655 | vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >> | |
656 | SM5502_REG_DEVICE_ID_VENDOR_SHIFT); | |
657 | version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >> | |
658 | SM5502_REG_DEVICE_ID_VERSION_SHIFT); | |
659 | ||
660 | dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n", | |
661 | version_id, vendor_id); | |
662 | ||
663 | /* Initiazle the register of SM5502 device to bring-up */ | |
f33c056d | 664 | for (i = 0; i < info->type->num_reg_data; i++) { |
914b881f CC |
665 | unsigned int val = 0; |
666 | ||
f33c056d SG |
667 | if (!info->type->reg_data[i].invert) |
668 | val |= ~info->type->reg_data[i].val; | |
914b881f | 669 | else |
f33c056d SG |
670 | val = info->type->reg_data[i].val; |
671 | regmap_write(info->regmap, info->type->reg_data[i].reg, val); | |
914b881f CC |
672 | } |
673 | } | |
674 | ||
b1b76af2 | 675 | static int sm5022_muic_i2c_probe(struct i2c_client *i2c) |
914b881f CC |
676 | { |
677 | struct device_node *np = i2c->dev.of_node; | |
678 | struct sm5502_muic_info *info; | |
679 | int i, ret, irq_flags; | |
680 | ||
681 | if (!np) | |
682 | return -EINVAL; | |
683 | ||
684 | info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL); | |
685 | if (!info) | |
686 | return -ENOMEM; | |
687 | i2c_set_clientdata(i2c, info); | |
688 | ||
689 | info->dev = &i2c->dev; | |
690 | info->i2c = i2c; | |
691 | info->irq = i2c->irq; | |
f33c056d SG |
692 | info->type = device_get_match_data(info->dev); |
693 | if (!info->type) | |
694 | return -EINVAL; | |
695 | if (!info->type->parse_irq) { | |
696 | dev_err(info->dev, "parse_irq missing in struct sm5502_type\n"); | |
697 | return -EINVAL; | |
698 | } | |
914b881f CC |
699 | |
700 | mutex_init(&info->mutex); | |
701 | ||
702 | INIT_WORK(&info->irq_work, sm5502_muic_irq_work); | |
703 | ||
704 | info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config); | |
705 | if (IS_ERR(info->regmap)) { | |
706 | ret = PTR_ERR(info->regmap); | |
707 | dev_err(info->dev, "failed to allocate register map: %d\n", | |
708 | ret); | |
709 | return ret; | |
710 | } | |
711 | ||
712 | /* Support irq domain for SM5502 MUIC device */ | |
713 | irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED; | |
f33c056d SG |
714 | ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq, |
715 | irq_flags, 0, info->type->irq_chip, | |
716 | &info->irq_data); | |
914b881f CC |
717 | if (ret != 0) { |
718 | dev_err(info->dev, "failed to request IRQ %d: %d\n", | |
719 | info->irq, ret); | |
720 | return ret; | |
721 | } | |
722 | ||
f33c056d SG |
723 | for (i = 0; i < info->type->num_muic_irqs; i++) { |
724 | struct muic_irq *muic_irq = &info->type->muic_irqs[i]; | |
363b3891 | 725 | int virq = 0; |
914b881f CC |
726 | |
727 | virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq); | |
728 | if (virq <= 0) | |
729 | return -EINVAL; | |
730 | muic_irq->virq = virq; | |
731 | ||
732 | ret = devm_request_threaded_irq(info->dev, virq, NULL, | |
733 | sm5502_muic_irq_handler, | |
005ad187 | 734 | IRQF_NO_SUSPEND | IRQF_ONESHOT, |
914b881f CC |
735 | muic_irq->name, info); |
736 | if (ret) { | |
fbae30d8 CC |
737 | dev_err(info->dev, |
738 | "failed: irq request (IRQ: %d, error :%d)\n", | |
739 | muic_irq->irq, ret); | |
914b881f CC |
740 | return ret; |
741 | } | |
742 | } | |
743 | ||
744 | /* Allocate extcon device */ | |
745 | info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable); | |
746 | if (IS_ERR(info->edev)) { | |
747 | dev_err(info->dev, "failed to allocate memory for extcon\n"); | |
748 | return -ENOMEM; | |
749 | } | |
914b881f CC |
750 | |
751 | /* Register extcon device */ | |
752 | ret = devm_extcon_dev_register(info->dev, info->edev); | |
753 | if (ret) { | |
754 | dev_err(info->dev, "failed to register extcon device\n"); | |
755 | return ret; | |
756 | } | |
757 | ||
e1954452 CC |
758 | /* |
759 | * Detect accessory after completing the initialization of platform | |
760 | * | |
761 | * - Use delayed workqueue to detect cable state and then | |
762 | * notify cable state to notifiee/platform through uevent. | |
763 | * After completing the booting of platform, the extcon provider | |
764 | * driver should notify cable state to upper layer. | |
765 | */ | |
766 | INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq); | |
767 | queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, | |
768 | msecs_to_jiffies(DELAY_MS_DEFAULT)); | |
769 | ||
914b881f CC |
770 | /* Initialize SM5502 device and print vendor id and version id */ |
771 | sm5502_init_dev_type(info); | |
772 | ||
773 | return 0; | |
774 | } | |
775 | ||
f33c056d SG |
776 | static const struct sm5502_type sm5502_data = { |
777 | .muic_irqs = sm5502_muic_irqs, | |
778 | .num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs), | |
779 | .irq_chip = &sm5502_muic_irq_chip, | |
780 | .reg_data = sm5502_reg_data, | |
781 | .num_reg_data = ARRAY_SIZE(sm5502_reg_data), | |
d97c0ff5 | 782 | .otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK, |
f33c056d SG |
783 | .parse_irq = sm5502_parse_irq, |
784 | }; | |
785 | ||
d97c0ff5 SG |
786 | static const struct sm5502_type sm5504_data = { |
787 | .muic_irqs = sm5504_muic_irqs, | |
788 | .num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs), | |
789 | .irq_chip = &sm5504_muic_irq_chip, | |
790 | .reg_data = sm5504_reg_data, | |
791 | .num_reg_data = ARRAY_SIZE(sm5504_reg_data), | |
792 | .otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK, | |
793 | .parse_irq = sm5504_parse_irq, | |
794 | }; | |
795 | ||
34825e51 | 796 | static const struct of_device_id sm5502_dt_match[] = { |
f33c056d | 797 | { .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data }, |
d97c0ff5 | 798 | { .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data }, |
a84df1c7 | 799 | { .compatible = "siliconmitus,sm5703-muic", .data = &sm5502_data }, |
914b881f CC |
800 | { }, |
801 | }; | |
ff612f91 | 802 | MODULE_DEVICE_TABLE(of, sm5502_dt_match); |
914b881f CC |
803 | |
804 | #ifdef CONFIG_PM_SLEEP | |
805 | static int sm5502_muic_suspend(struct device *dev) | |
806 | { | |
d5859342 | 807 | struct i2c_client *i2c = to_i2c_client(dev); |
914b881f CC |
808 | struct sm5502_muic_info *info = i2c_get_clientdata(i2c); |
809 | ||
810 | enable_irq_wake(info->irq); | |
811 | ||
812 | return 0; | |
813 | } | |
814 | ||
815 | static int sm5502_muic_resume(struct device *dev) | |
816 | { | |
d5859342 | 817 | struct i2c_client *i2c = to_i2c_client(dev); |
914b881f CC |
818 | struct sm5502_muic_info *info = i2c_get_clientdata(i2c); |
819 | ||
820 | disable_irq_wake(info->irq); | |
821 | ||
822 | return 0; | |
823 | } | |
824 | #endif | |
825 | ||
826 | static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops, | |
827 | sm5502_muic_suspend, sm5502_muic_resume); | |
828 | ||
829 | static const struct i2c_device_id sm5502_i2c_id[] = { | |
f33c056d | 830 | { "sm5502", (kernel_ulong_t)&sm5502_data }, |
d97c0ff5 | 831 | { "sm5504", (kernel_ulong_t)&sm5504_data }, |
5faf7cba | 832 | { "sm5703-muic", (kernel_ulong_t)&sm5502_data }, |
914b881f CC |
833 | { } |
834 | }; | |
835 | MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id); | |
836 | ||
837 | static struct i2c_driver sm5502_muic_i2c_driver = { | |
838 | .driver = { | |
839 | .name = "sm5502", | |
914b881f CC |
840 | .pm = &sm5502_muic_pm_ops, |
841 | .of_match_table = sm5502_dt_match, | |
842 | }, | |
bcfa8e33 | 843 | .probe = sm5022_muic_i2c_probe, |
914b881f CC |
844 | .id_table = sm5502_i2c_id, |
845 | }; | |
846 | ||
847 | static int __init sm5502_muic_i2c_init(void) | |
848 | { | |
849 | return i2c_add_driver(&sm5502_muic_i2c_driver); | |
850 | } | |
851 | subsys_initcall(sm5502_muic_i2c_init); | |
852 | ||
853 | MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver"); | |
854 | MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); | |
855 | MODULE_LICENSE("GPL"); |