Commit | Line | Data |
---|---|---|
420390f0 RD |
1 | /* |
2 | * Intel 82975X Memory Controller kernel module | |
3 | * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) | |
4 | * (C) 2007 jetzbroadband (http://jetzbroadband.com) | |
5 | * This file may be distributed under the terms of the | |
6 | * GNU General Public License. | |
7 | * | |
8 | * Written by Arvind R. | |
9 | * Copied from i82875p_edac.c source: | |
10 | */ | |
11 | ||
12 | #include <linux/module.h> | |
13 | #include <linux/init.h> | |
14 | #include <linux/pci.h> | |
15 | #include <linux/pci_ids.h> | |
c3c52bce | 16 | #include <linux/edac.h> |
78d88e8a | 17 | #include "edac_module.h" |
420390f0 | 18 | |
420390f0 RD |
19 | #define EDAC_MOD_STR "i82975x_edac" |
20 | ||
21 | #define i82975x_printk(level, fmt, arg...) \ | |
22 | edac_printk(level, "i82975x", fmt, ##arg) | |
23 | ||
24 | #define i82975x_mc_printk(mci, level, fmt, arg...) \ | |
25 | edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg) | |
26 | ||
27 | #ifndef PCI_DEVICE_ID_INTEL_82975_0 | |
28 | #define PCI_DEVICE_ID_INTEL_82975_0 0x277c | |
29 | #endif /* PCI_DEVICE_ID_INTEL_82975_0 */ | |
30 | ||
70521358 MCC |
31 | #define I82975X_NR_DIMMS 8 |
32 | #define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans)) | |
420390f0 RD |
33 | |
34 | /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */ | |
35 | #define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b) | |
36 | * | |
37 | * 31:7 128 byte cache-line address | |
38 | * 6:1 reserved | |
39 | * 0 0: CH0; 1: CH1 | |
40 | */ | |
41 | ||
42 | #define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b) | |
43 | * | |
44 | * 7:0 DRAM ECC Syndrome | |
45 | */ | |
46 | ||
47 | #define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b) | |
48 | * 0h: Processor Memory Reads | |
49 | * 1h:7h reserved | |
50 | * More - See Page 65 of Intel DocSheet. | |
51 | */ | |
52 | ||
53 | #define I82975X_ERRSTS 0xc8 /* Error Status Register (16b) | |
54 | * | |
55 | * 15:12 reserved | |
56 | * 11 Thermal Sensor Event | |
57 | * 10 reserved | |
58 | * 9 non-DRAM lock error (ndlock) | |
59 | * 8 Refresh Timeout | |
60 | * 7:2 reserved | |
61 | * 1 ECC UE (multibit DRAM error) | |
62 | * 0 ECC CE (singlebit DRAM error) | |
63 | */ | |
64 | ||
65 | /* Error Reporting is supported by 3 mechanisms: | |
66 | 1. DMI SERR generation ( ERRCMD ) | |
67 | 2. SMI DMI generation ( SMICMD ) | |
68 | 3. SCI DMI generation ( SCICMD ) | |
69 | NOTE: Only ONE of the three must be enabled | |
70 | */ | |
71 | #define I82975X_ERRCMD 0xca /* Error Command (16b) | |
72 | * | |
73 | * 15:12 reserved | |
74 | * 11 Thermal Sensor Event | |
75 | * 10 reserved | |
76 | * 9 non-DRAM lock error (ndlock) | |
77 | * 8 Refresh Timeout | |
78 | * 7:2 reserved | |
79 | * 1 ECC UE (multibit DRAM error) | |
80 | * 0 ECC CE (singlebit DRAM error) | |
81 | */ | |
82 | ||
83 | #define I82975X_SMICMD 0xcc /* Error Command (16b) | |
84 | * | |
85 | * 15:2 reserved | |
86 | * 1 ECC UE (multibit DRAM error) | |
87 | * 0 ECC CE (singlebit DRAM error) | |
88 | */ | |
89 | ||
90 | #define I82975X_SCICMD 0xce /* Error Command (16b) | |
91 | * | |
92 | * 15:2 reserved | |
93 | * 1 ECC UE (multibit DRAM error) | |
94 | * 0 ECC CE (singlebit DRAM error) | |
95 | */ | |
96 | ||
97 | #define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b) | |
98 | * | |
99 | * 7:1 reserved | |
100 | * 0 Bit32 of the Dram Error Address | |
101 | */ | |
102 | ||
103 | #define I82975X_MCHBAR 0x44 /* | |
104 | * | |
105 | * 31:14 Base Addr of 16K memory-mapped | |
106 | * configuration space | |
107 | * 13:1 reserverd | |
108 | * 0 mem-mapped config space enable | |
109 | */ | |
110 | ||
111 | /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */ | |
112 | /* Intel 82975x memory mapped register space */ | |
113 | ||
114 | #define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */ | |
115 | ||
116 | #define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8) | |
117 | * | |
118 | * 7 set to 1 in highest DRB of | |
119 | * channel if 4GB in ch. | |
120 | * 6:2 upper boundary of rank in | |
121 | * 32MB grains | |
122 | * 1:0 set to 0 | |
123 | */ | |
124 | #define I82975X_DRB_CH0R0 0x100 | |
125 | #define I82975X_DRB_CH0R1 0x101 | |
126 | #define I82975X_DRB_CH0R2 0x102 | |
127 | #define I82975X_DRB_CH0R3 0x103 | |
128 | #define I82975X_DRB_CH1R0 0x180 | |
129 | #define I82975X_DRB_CH1R1 0x181 | |
130 | #define I82975X_DRB_CH1R2 0x182 | |
131 | #define I82975X_DRB_CH1R3 0x183 | |
132 | ||
133 | ||
134 | #define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8) | |
135 | * defines the PAGE SIZE to be used | |
136 | * for the rank | |
137 | * 7 reserved | |
138 | * 6:4 row attr of odd rank, i.e. 1 | |
139 | * 3 reserved | |
140 | * 2:0 row attr of even rank, i.e. 0 | |
141 | * | |
142 | * 000 = unpopulated | |
143 | * 001 = reserved | |
144 | * 010 = 4KiB | |
145 | * 011 = 8KiB | |
146 | * 100 = 16KiB | |
147 | * others = reserved | |
148 | */ | |
149 | #define I82975X_DRA_CH0R01 0x108 | |
150 | #define I82975X_DRA_CH0R23 0x109 | |
151 | #define I82975X_DRA_CH1R01 0x188 | |
152 | #define I82975X_DRA_CH1R23 0x189 | |
153 | ||
154 | ||
155 | #define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b) | |
156 | * | |
157 | * 15:8 reserved | |
158 | * 7:6 Rank 3 architecture | |
159 | * 5:4 Rank 2 architecture | |
160 | * 3:2 Rank 1 architecture | |
161 | * 1:0 Rank 0 architecture | |
162 | * | |
7ba99575 A |
163 | * 00 => 4 banks |
164 | * 01 => 8 banks | |
420390f0 RD |
165 | */ |
166 | #define I82975X_C0BNKARC 0x10e | |
167 | #define I82975X_C1BNKARC 0x18e | |
168 | ||
169 | ||
170 | ||
171 | #define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b) | |
172 | * | |
173 | * 31:30 reserved | |
174 | * 29 init complete | |
175 | * 28:11 reserved, according to Intel | |
176 | * 22:21 number of channels | |
177 | * 00=1 01=2 in 82875 | |
178 | * seems to be ECC mode | |
179 | * bits in 82975 in Asus | |
180 | * P5W | |
181 | * 19:18 Data Integ Mode | |
182 | * 00=none 01=ECC in 82875 | |
183 | * 10:8 refresh mode | |
184 | * 7 reserved | |
185 | * 6:4 mode select | |
186 | * 3:2 reserved | |
187 | * 1:0 DRAM type 10=Second Revision | |
188 | * DDR2 SDRAM | |
189 | * 00, 01, 11 reserved | |
190 | */ | |
191 | #define I82975X_DRC_CH0M0 0x120 | |
192 | #define I82975X_DRC_CH1M0 0x1A0 | |
193 | ||
194 | ||
195 | #define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b) | |
196 | * 31 0=Standard Address Map | |
197 | * 1=Enhanced Address Map | |
198 | * 30:0 reserved | |
199 | */ | |
200 | ||
201 | #define I82975X_DRC_CH0M1 0x124 | |
202 | #define I82975X_DRC_CH1M1 0x1A4 | |
203 | ||
204 | enum i82975x_chips { | |
205 | I82975X = 0, | |
206 | }; | |
207 | ||
208 | struct i82975x_pvt { | |
209 | void __iomem *mch_window; | |
210 | }; | |
211 | ||
212 | struct i82975x_dev_info { | |
213 | const char *ctl_name; | |
214 | }; | |
215 | ||
216 | struct i82975x_error_info { | |
217 | u16 errsts; | |
218 | u32 eap; | |
219 | u8 des; | |
220 | u8 derrsyn; | |
221 | u16 errsts2; | |
222 | u8 chan; /* the channel is bit 0 of EAP */ | |
223 | u8 xeap; /* extended eap bit */ | |
224 | }; | |
225 | ||
226 | static const struct i82975x_dev_info i82975x_devs[] = { | |
227 | [I82975X] = { | |
228 | .ctl_name = "i82975x" | |
229 | }, | |
230 | }; | |
231 | ||
232 | static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has | |
233 | * already registered driver | |
234 | */ | |
235 | ||
236 | static int i82975x_registered = 1; | |
237 | ||
238 | static void i82975x_get_error_info(struct mem_ctl_info *mci, | |
239 | struct i82975x_error_info *info) | |
240 | { | |
241 | struct pci_dev *pdev; | |
242 | ||
fd687502 | 243 | pdev = to_pci_dev(mci->pdev); |
420390f0 RD |
244 | |
245 | /* | |
246 | * This is a mess because there is no atomic way to read all the | |
247 | * registers at once and the registers can transition from CE being | |
248 | * overwritten by UE. | |
249 | */ | |
250 | pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts); | |
251 | pci_read_config_dword(pdev, I82975X_EAP, &info->eap); | |
252 | pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); | |
253 | pci_read_config_byte(pdev, I82975X_DES, &info->des); | |
254 | pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn); | |
255 | pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2); | |
256 | ||
257 | pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003); | |
258 | ||
259 | /* | |
260 | * If the error is the same then we can for both reads then | |
261 | * the first set of reads is valid. If there is a change then | |
262 | * there is a CE no info and the second set of reads is valid | |
263 | * and should be UE info. | |
264 | */ | |
265 | if (!(info->errsts2 & 0x0003)) | |
266 | return; | |
267 | ||
268 | if ((info->errsts ^ info->errsts2) & 0x0003) { | |
269 | pci_read_config_dword(pdev, I82975X_EAP, &info->eap); | |
270 | pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); | |
271 | pci_read_config_byte(pdev, I82975X_DES, &info->des); | |
272 | pci_read_config_byte(pdev, I82975X_DERRSYN, | |
273 | &info->derrsyn); | |
274 | } | |
275 | } | |
276 | ||
277 | static int i82975x_process_error_info(struct mem_ctl_info *mci, | |
278 | struct i82975x_error_info *info, int handle_errors) | |
279 | { | |
6099e419 | 280 | int row, chan; |
cb60a422 | 281 | unsigned long offst, page; |
420390f0 | 282 | |
420390f0 RD |
283 | if (!(info->errsts2 & 0x0003)) |
284 | return 0; | |
285 | ||
286 | if (!handle_errors) | |
287 | return 1; | |
288 | ||
289 | if ((info->errsts ^ info->errsts2) & 0x0003) { | |
9eb07a7f | 290 | edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, |
03f7eae8 | 291 | -1, -1, -1, "UE overwrote CE", ""); |
420390f0 RD |
292 | info->errsts = info->errsts2; |
293 | } | |
294 | ||
cb60a422 | 295 | page = (unsigned long) info->eap; |
cb60a422 | 296 | page >>= 1; |
6099e419 A |
297 | if (info->xeap & 1) |
298 | page |= 0x80000000; | |
299 | page >>= (PAGE_SHIFT - 1); | |
cb60a422 | 300 | row = edac_mc_find_csrow_by_page(mci, page); |
420390f0 | 301 | |
6099e419 A |
302 | if (row == -1) { |
303 | i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n" | |
304 | "\tXEAP=%u\n" | |
305 | "\t EAP=0x%08x\n" | |
306 | "\tPAGE=0x%08x\n", | |
307 | (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page); | |
308 | return 0; | |
309 | } | |
de3910eb | 310 | chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1; |
6099e419 A |
311 | offst = info->eap |
312 | & ((1 << PAGE_SHIFT) - | |
de3910eb | 313 | (1 << mci->csrows[row]->channels[chan]->dimm->grain)); |
6099e419 | 314 | |
420390f0 | 315 | if (info->errsts & 0x0002) |
9eb07a7f | 316 | edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, |
70521358 MCC |
317 | page, offst, 0, |
318 | row, -1, -1, | |
03f7eae8 | 319 | "i82975x UE", ""); |
420390f0 | 320 | else |
9eb07a7f | 321 | edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, |
70521358 MCC |
322 | page, offst, info->derrsyn, |
323 | row, chan ? chan : 0, -1, | |
03f7eae8 | 324 | "i82975x CE", ""); |
420390f0 RD |
325 | |
326 | return 1; | |
327 | } | |
328 | ||
329 | static void i82975x_check(struct mem_ctl_info *mci) | |
330 | { | |
331 | struct i82975x_error_info info; | |
332 | ||
956b9ba1 | 333 | edac_dbg(1, "MC%d\n", mci->mc_idx); |
420390f0 RD |
334 | i82975x_get_error_info(mci, &info); |
335 | i82975x_process_error_info(mci, &info, 1); | |
336 | } | |
337 | ||
338 | /* Return 1 if dual channel mode is active. Else return 0. */ | |
339 | static int dual_channel_active(void __iomem *mch_window) | |
340 | { | |
341 | /* | |
342 | * We treat interleaved-symmetric configuration as dual-channel - EAP's | |
343 | * bit-0 giving the channel of the error location. | |
344 | * | |
345 | * All other configurations are treated as single channel - the EAP's | |
346 | * bit-0 will resolve ok in symmetric area of mixed | |
347 | * (symmetric/asymmetric) configurations | |
348 | */ | |
349 | u8 drb[4][2]; | |
350 | int row; | |
351 | int dualch; | |
352 | ||
353 | for (dualch = 1, row = 0; dualch && (row < 4); row++) { | |
354 | drb[row][0] = readb(mch_window + I82975X_DRB + row); | |
355 | drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80); | |
356 | dualch = dualch && (drb[row][0] == drb[row][1]); | |
357 | } | |
358 | return dualch; | |
359 | } | |
360 | ||
361 | static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) | |
362 | { | |
363 | /* | |
7ba99575 | 364 | * ECC is possible on i92975x ONLY with DEV_X8 |
420390f0 RD |
365 | */ |
366 | return DEV_X8; | |
367 | } | |
368 | ||
369 | static void i82975x_init_csrows(struct mem_ctl_info *mci, | |
370 | struct pci_dev *pdev, void __iomem *mch_window) | |
371 | { | |
372 | struct csrow_info *csrow; | |
373 | unsigned long last_cumul_size; | |
374 | u8 value; | |
a895bf8b | 375 | u32 cumul_size, nr_pages; |
cb60a422 | 376 | int index, chan; |
084a4fcc MCC |
377 | struct dimm_info *dimm; |
378 | enum dev_type dtype; | |
420390f0 RD |
379 | |
380 | last_cumul_size = 0; | |
381 | ||
382 | /* | |
383 | * 82875 comment: | |
384 | * The dram row boundary (DRB) reg values are boundary address | |
385 | * for each DRAM row with a granularity of 32 or 64MB (single/dual | |
386 | * channel operation). DRB regs are cumulative; therefore DRB7 will | |
cb60a422 | 387 | * contain the total memory contained in all rows. |
420390f0 RD |
388 | * |
389 | */ | |
390 | ||
391 | for (index = 0; index < mci->nr_csrows; index++) { | |
de3910eb | 392 | csrow = mci->csrows[index]; |
420390f0 RD |
393 | |
394 | value = readb(mch_window + I82975X_DRB + index + | |
395 | ((index >= 4) ? 0x80 : 0)); | |
396 | cumul_size = value; | |
397 | cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); | |
cb60a422 A |
398 | /* |
399 | * Adjust cumul_size w.r.t number of channels | |
400 | * | |
401 | */ | |
402 | if (csrow->nr_channels > 1) | |
403 | cumul_size <<= 1; | |
956b9ba1 | 404 | edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); |
cb60a422 | 405 | |
a895bf8b | 406 | nr_pages = cumul_size - last_cumul_size; |
36683aab MCC |
407 | if (!nr_pages) |
408 | continue; | |
409 | ||
cb60a422 A |
410 | /* |
411 | * Initialise dram labels | |
412 | * index values: | |
413 | * [0-7] for single-channel; i.e. csrow->nr_channels = 1 | |
414 | * [0-3] for dual-channel; i.e. csrow->nr_channels = 2 | |
415 | */ | |
084a4fcc MCC |
416 | dtype = i82975x_dram_type(mch_window, index); |
417 | for (chan = 0; chan < csrow->nr_channels; chan++) { | |
de3910eb | 418 | dimm = mci->csrows[index]->channels[chan]->dimm; |
a895bf8b | 419 | |
a895bf8b | 420 | dimm->nr_pages = nr_pages / csrow->nr_channels; |
47969684 MCC |
421 | |
422 | snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d", | |
423 | (chan == 0) ? 'A' : 'B', | |
424 | index); | |
084a4fcc MCC |
425 | dimm->grain = 1 << 7; /* 128Byte cache-line resolution */ |
426 | dimm->dtype = i82975x_dram_type(mch_window, index); | |
427 | dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ | |
428 | dimm->edac_mode = EDAC_SECDED; /* only supported */ | |
429 | } | |
cb60a422 | 430 | |
420390f0 RD |
431 | csrow->first_page = last_cumul_size; |
432 | csrow->last_page = cumul_size - 1; | |
420390f0 | 433 | last_cumul_size = cumul_size; |
420390f0 RD |
434 | } |
435 | } | |
436 | ||
437 | /* #define i82975x_DEBUG_IOMEM */ | |
438 | ||
439 | #ifdef i82975x_DEBUG_IOMEM | |
440 | static void i82975x_print_dram_timings(void __iomem *mch_window) | |
441 | { | |
442 | /* | |
443 | * The register meanings are from Intel specs; | |
444 | * (shows 13-5-5-5 for 800-DDR2) | |
445 | * Asus P5W Bios reports 15-5-4-4 | |
446 | * What's your religion? | |
447 | */ | |
448 | static const int caslats[4] = { 5, 4, 3, 6 }; | |
449 | u32 dtreg[2]; | |
450 | ||
451 | dtreg[0] = readl(mch_window + 0x114); | |
452 | dtreg[1] = readl(mch_window + 0x194); | |
453 | i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n" | |
454 | " RAS Active Min = %d %d\n" | |
455 | " CAS latency = %d %d\n" | |
456 | " RAS to CAS = %d %d\n" | |
457 | " RAS precharge = %d %d\n", | |
458 | (dtreg[0] >> 19 ) & 0x0f, | |
459 | (dtreg[1] >> 19) & 0x0f, | |
460 | caslats[(dtreg[0] >> 8) & 0x03], | |
461 | caslats[(dtreg[1] >> 8) & 0x03], | |
462 | ((dtreg[0] >> 4) & 0x07) + 2, | |
463 | ((dtreg[1] >> 4) & 0x07) + 2, | |
464 | (dtreg[0] & 0x07) + 2, | |
465 | (dtreg[1] & 0x07) + 2 | |
466 | ); | |
467 | ||
468 | } | |
469 | #endif | |
470 | ||
471 | static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) | |
472 | { | |
473 | int rc = -ENODEV; | |
474 | struct mem_ctl_info *mci; | |
70521358 | 475 | struct edac_mc_layer layers[2]; |
420390f0 RD |
476 | struct i82975x_pvt *pvt; |
477 | void __iomem *mch_window; | |
478 | u32 mchbar; | |
479 | u32 drc[2]; | |
480 | struct i82975x_error_info discard; | |
481 | int chans; | |
482 | #ifdef i82975x_DEBUG_IOMEM | |
483 | u8 c0drb[4]; | |
484 | u8 c1drb[4]; | |
485 | #endif | |
486 | ||
956b9ba1 | 487 | edac_dbg(0, "\n"); |
420390f0 RD |
488 | |
489 | pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar); | |
490 | if (!(mchbar & 1)) { | |
956b9ba1 | 491 | edac_dbg(3, "failed, MCHBAR disabled!\n"); |
420390f0 RD |
492 | goto fail0; |
493 | } | |
494 | mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */ | |
495 | mch_window = ioremap_nocache(mchbar, 0x1000); | |
f5c61277 AY |
496 | if (!mch_window) { |
497 | edac_dbg(3, "error ioremapping MCHBAR!\n"); | |
498 | goto fail0; | |
499 | } | |
420390f0 RD |
500 | |
501 | #ifdef i82975x_DEBUG_IOMEM | |
502 | i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n", | |
503 | mchbar, mch_window); | |
504 | ||
505 | c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0); | |
506 | c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1); | |
507 | c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2); | |
508 | c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3); | |
509 | c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0); | |
510 | c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1); | |
511 | c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2); | |
512 | c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3); | |
513 | i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]); | |
514 | i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]); | |
515 | i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]); | |
516 | i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]); | |
517 | i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]); | |
518 | i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]); | |
519 | i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]); | |
520 | i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]); | |
521 | #endif | |
522 | ||
523 | drc[0] = readl(mch_window + I82975X_DRC_CH0M0); | |
524 | drc[1] = readl(mch_window + I82975X_DRC_CH1M0); | |
525 | #ifdef i82975x_DEBUG_IOMEM | |
526 | i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0], | |
527 | ((drc[0] >> 21) & 3) == 1 ? | |
528 | "ECC enabled" : "ECC disabled"); | |
529 | i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1], | |
530 | ((drc[1] >> 21) & 3) == 1 ? | |
531 | "ECC enabled" : "ECC disabled"); | |
532 | ||
533 | i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n", | |
534 | readw(mch_window + I82975X_C0BNKARC)); | |
535 | i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", | |
536 | readw(mch_window + I82975X_C1BNKARC)); | |
537 | i82975x_print_dram_timings(mch_window); | |
538 | goto fail1; | |
539 | #endif | |
540 | if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) { | |
541 | i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n"); | |
542 | goto fail1; | |
543 | } | |
544 | ||
545 | chans = dual_channel_active(mch_window) + 1; | |
546 | ||
547 | /* assuming only one controller, index thus is 0 */ | |
70521358 MCC |
548 | layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; |
549 | layers[0].size = I82975X_NR_DIMMS; | |
550 | layers[0].is_virt_csrow = true; | |
551 | layers[1].type = EDAC_MC_LAYER_CHANNEL; | |
552 | layers[1].size = I82975X_NR_CSROWS(chans); | |
553 | layers[1].is_virt_csrow = false; | |
ca0907b9 | 554 | mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); |
420390f0 RD |
555 | if (!mci) { |
556 | rc = -ENOMEM; | |
557 | goto fail1; | |
558 | } | |
559 | ||
956b9ba1 | 560 | edac_dbg(3, "init mci\n"); |
fd687502 | 561 | mci->pdev = &pdev->dev; |
da95b3d2 | 562 | mci->mtype_cap = MEM_FLAG_DDR2; |
420390f0 RD |
563 | mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; |
564 | mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; | |
565 | mci->mod_name = EDAC_MOD_STR; | |
420390f0 | 566 | mci->ctl_name = i82975x_devs[dev_idx].ctl_name; |
da95b3d2 | 567 | mci->dev_name = pci_name(pdev); |
420390f0 RD |
568 | mci->edac_check = i82975x_check; |
569 | mci->ctl_page_to_phys = NULL; | |
956b9ba1 | 570 | edac_dbg(3, "init pvt\n"); |
420390f0 RD |
571 | pvt = (struct i82975x_pvt *) mci->pvt_info; |
572 | pvt->mch_window = mch_window; | |
573 | i82975x_init_csrows(mci, pdev, mch_window); | |
da95b3d2 | 574 | mci->scrub_mode = SCRUB_HW_SRC; |
420390f0 RD |
575 | i82975x_get_error_info(mci, &discard); /* clear counters */ |
576 | ||
577 | /* finalize this instance of memory controller with edac core */ | |
578 | if (edac_mc_add_mc(mci)) { | |
956b9ba1 | 579 | edac_dbg(3, "failed edac_mc_add_mc()\n"); |
420390f0 RD |
580 | goto fail2; |
581 | } | |
582 | ||
583 | /* get this far and it's successful */ | |
956b9ba1 | 584 | edac_dbg(3, "success\n"); |
420390f0 RD |
585 | return 0; |
586 | ||
587 | fail2: | |
588 | edac_mc_free(mci); | |
589 | ||
590 | fail1: | |
591 | iounmap(mch_window); | |
592 | fail0: | |
593 | return rc; | |
594 | } | |
595 | ||
596 | /* returns count (>= 0), or negative on error */ | |
9b3c6e85 GKH |
597 | static int i82975x_init_one(struct pci_dev *pdev, |
598 | const struct pci_device_id *ent) | |
420390f0 RD |
599 | { |
600 | int rc; | |
601 | ||
956b9ba1 | 602 | edac_dbg(0, "\n"); |
420390f0 RD |
603 | |
604 | if (pci_enable_device(pdev) < 0) | |
605 | return -EIO; | |
606 | ||
607 | rc = i82975x_probe1(pdev, ent->driver_data); | |
608 | ||
609 | if (mci_pdev == NULL) | |
610 | mci_pdev = pci_dev_get(pdev); | |
611 | ||
612 | return rc; | |
613 | } | |
614 | ||
9b3c6e85 | 615 | static void i82975x_remove_one(struct pci_dev *pdev) |
420390f0 RD |
616 | { |
617 | struct mem_ctl_info *mci; | |
618 | struct i82975x_pvt *pvt; | |
619 | ||
956b9ba1 | 620 | edac_dbg(0, "\n"); |
420390f0 RD |
621 | |
622 | mci = edac_mc_del_mc(&pdev->dev); | |
623 | if (mci == NULL) | |
624 | return; | |
625 | ||
626 | pvt = mci->pvt_info; | |
627 | if (pvt->mch_window) | |
628 | iounmap( pvt->mch_window ); | |
629 | ||
630 | edac_mc_free(mci); | |
631 | } | |
632 | ||
ba935f40 | 633 | static const struct pci_device_id i82975x_pci_tbl[] = { |
420390f0 RD |
634 | { |
635 | PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, | |
636 | I82975X | |
637 | }, | |
638 | { | |
639 | 0, | |
640 | } /* 0 terminated list. */ | |
641 | }; | |
642 | ||
643 | MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl); | |
644 | ||
645 | static struct pci_driver i82975x_driver = { | |
646 | .name = EDAC_MOD_STR, | |
647 | .probe = i82975x_init_one, | |
9b3c6e85 | 648 | .remove = i82975x_remove_one, |
420390f0 RD |
649 | .id_table = i82975x_pci_tbl, |
650 | }; | |
651 | ||
652 | static int __init i82975x_init(void) | |
653 | { | |
654 | int pci_rc; | |
655 | ||
956b9ba1 | 656 | edac_dbg(3, "\n"); |
420390f0 | 657 | |
c3c52bce HM |
658 | /* Ensure that the OPSTATE is set correctly for POLL or NMI */ |
659 | opstate_init(); | |
660 | ||
420390f0 RD |
661 | pci_rc = pci_register_driver(&i82975x_driver); |
662 | if (pci_rc < 0) | |
663 | goto fail0; | |
664 | ||
665 | if (mci_pdev == NULL) { | |
666 | mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, | |
667 | PCI_DEVICE_ID_INTEL_82975_0, NULL); | |
668 | ||
669 | if (!mci_pdev) { | |
956b9ba1 | 670 | edac_dbg(0, "i82975x pci_get_device fail\n"); |
420390f0 RD |
671 | pci_rc = -ENODEV; |
672 | goto fail1; | |
673 | } | |
674 | ||
675 | pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl); | |
676 | ||
677 | if (pci_rc < 0) { | |
956b9ba1 | 678 | edac_dbg(0, "i82975x init fail\n"); |
420390f0 RD |
679 | pci_rc = -ENODEV; |
680 | goto fail1; | |
681 | } | |
682 | } | |
683 | ||
684 | return 0; | |
685 | ||
686 | fail1: | |
687 | pci_unregister_driver(&i82975x_driver); | |
688 | ||
689 | fail0: | |
72601945 | 690 | pci_dev_put(mci_pdev); |
420390f0 RD |
691 | return pci_rc; |
692 | } | |
693 | ||
694 | static void __exit i82975x_exit(void) | |
695 | { | |
956b9ba1 | 696 | edac_dbg(3, "\n"); |
420390f0 RD |
697 | |
698 | pci_unregister_driver(&i82975x_driver); | |
699 | ||
700 | if (!i82975x_registered) { | |
701 | i82975x_remove_one(mci_pdev); | |
702 | pci_dev_put(mci_pdev); | |
703 | } | |
704 | } | |
705 | ||
706 | module_init(i82975x_init); | |
707 | module_exit(i82975x_exit); | |
708 | ||
709 | MODULE_LICENSE("GPL"); | |
25527885 | 710 | MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); |
420390f0 | 711 | MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); |
c3c52bce HM |
712 | |
713 | module_param(edac_op_state, int, 0444); | |
714 | MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); |