Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Character device configuration | |
3 | # | |
4 | ||
5 | menu "Character devices" | |
6 | ||
bdcffc5a | 7 | source "drivers/tty/Kconfig" |
13ae6645 | 8 | |
b781ecb6 AV |
9 | config DEVKMEM |
10 | bool "/dev/kmem virtual device support" | |
11 | default y | |
12 | help | |
13 | Say Y here if you want to support the /dev/kmem device. The | |
14 | /dev/kmem device is rarely used, but can be used for certain | |
15 | kind of kernel debugging operations. | |
16 | When in doubt, say "N". | |
17 | ||
1da177e4 LT |
18 | config STALDRV |
19 | bool "Stallion multiport serial support" | |
20 | depends on SERIAL_NONSTANDARD | |
21 | help | |
22 | Stallion cards give you many serial ports. You would need something | |
23 | like this to connect more than two modems to your Linux box, for | |
24 | instance in order to become a dial-in server. If you say Y here, | |
25 | you will be asked for your specific card model in the next | |
31c00fc1 RD |
26 | questions. Make sure to read <file:Documentation/serial/stallion.txt> |
27 | in this case. If you have never heard about all this, it's safe to | |
1da177e4 LT |
28 | say N. |
29 | ||
1da177e4 LT |
30 | config SGI_SNSC |
31 | bool "SGI Altix system controller communication support" | |
32 | depends on (IA64_SGI_SN2 || IA64_GENERIC) | |
33 | help | |
34 | If you have an SGI Altix and you want to enable system | |
35 | controller communication from user space (you want this!), | |
36 | say Y. Otherwise, say N. | |
37 | ||
e1e19747 BL |
38 | config SGI_TIOCX |
39 | bool "SGI TIO CX driver support" | |
40 | depends on (IA64_SGI_SN2 || IA64_GENERIC) | |
41 | help | |
42 | If you have an SGI Altix and you have fpga devices attached | |
43 | to your TIO, say Y here, otherwise say N. | |
44 | ||
45 | config SGI_MBCS | |
46 | tristate "SGI FPGA Core Services driver support" | |
ae40aae9 | 47 | depends on SGI_TIOCX |
e1e19747 BL |
48 | help |
49 | If you have an SGI Altix with an attached SABrick | |
50 | say Y or M here, otherwise say N. | |
51 | ||
ab4382d2 | 52 | source "drivers/tty/serial/Kconfig" |
1da177e4 | 53 | |
24b4b67d SP |
54 | config TTY_PRINTK |
55 | bool "TTY driver to output user messages via printk" | |
6a108a14 | 56 | depends on EXPERT |
24b4b67d SP |
57 | default n |
58 | ---help--- | |
59 | If you say Y here, the support for writing user messages (i.e. | |
60 | console messages) via printk is available. | |
61 | ||
62 | The feature is useful to inline user messages with kernel | |
63 | messages. | |
64 | In order to use this feature, you should output user messages | |
65 | to /dev/ttyprintk or redirect console to this TTY. | |
66 | ||
67 | If unsure, say N. | |
68 | ||
2dc63a84 MF |
69 | config BFIN_OTP |
70 | tristate "Blackfin On-Chip OTP Memory Support" | |
f69b2d7e | 71 | depends on BLACKFIN && (BF51x || BF52x || BF54x) |
2dc63a84 MF |
72 | default y |
73 | help | |
74 | If you say Y here, you will get support for a character device | |
75 | interface into the One Time Programmable memory pages that are | |
76 | stored on the Blackfin processor. This will not get you access | |
77 | to the secure memory pages however. You will need to write your | |
78 | own secure code and reader for that. | |
79 | ||
80 | To compile this driver as a module, choose M here: the module | |
81 | will be called bfin-otp. | |
82 | ||
83 | If unsure, it is safe to say Y. | |
84 | ||
85 | config BFIN_OTP_WRITE_ENABLE | |
86 | bool "Enable writing support of OTP pages" | |
87 | depends on BFIN_OTP | |
88 | default n | |
89 | help | |
90 | If you say Y here, you will enable support for writing of the | |
91 | OTP pages. This is dangerous by nature as you can only program | |
92 | the pages once, so only enable this option when you actually | |
93 | need it so as to not inadvertently clobber data. | |
94 | ||
95 | If unsure, say N. | |
96 | ||
1da177e4 LT |
97 | config PRINTER |
98 | tristate "Parallel printer support" | |
99 | depends on PARPORT | |
100 | ---help--- | |
101 | If you intend to attach a printer to the parallel port of your Linux | |
102 | box (as opposed to using a serial printer; if the connector at the | |
103 | printer has 9 or 25 holes ["female"], then it's serial), say Y. | |
104 | Also read the Printing-HOWTO, available from | |
105 | <http://www.tldp.org/docs.html#howto>. | |
106 | ||
107 | It is possible to share one parallel port among several devices | |
108 | (e.g. printer and ZIP drive) and it is safe to compile the | |
109 | corresponding drivers into the kernel. | |
110 | ||
111 | To compile this driver as a module, choose M here and read | |
112 | <file:Documentation/parport.txt>. The module will be called lp. | |
113 | ||
114 | If you have several parallel ports, you can specify which ports to | |
115 | use with the "lp" kernel command line option. (Try "man bootparam" | |
116 | or see the documentation of your boot loader (lilo or loadlin) about | |
117 | how to pass options to the kernel at boot time.) The syntax of the | |
118 | "lp" command line option can be found in <file:drivers/char/lp.c>. | |
119 | ||
120 | If you have more than 8 printers, you need to increase the LP_NO | |
121 | macro in lp.c and the PARPORT_MAX macro in parport.h. | |
122 | ||
123 | config LP_CONSOLE | |
124 | bool "Support for console on line printer" | |
125 | depends on PRINTER | |
126 | ---help--- | |
127 | If you want kernel messages to be printed out as they occur, you | |
128 | can have a console on the printer. This option adds support for | |
129 | doing that; to actually get it to happen you need to pass the | |
130 | option "console=lp0" to the kernel at boot time. | |
131 | ||
132 | If the printer is out of paper (or off, or unplugged, or too | |
133 | busy..) the kernel will stall until the printer is ready again. | |
134 | By defining CONSOLE_LP_STRICT to 0 (at your own risk) you | |
135 | can make the kernel continue when this happens, | |
136 | but it'll lose the kernel messages. | |
137 | ||
138 | If unsure, say N. | |
139 | ||
140 | config PPDEV | |
141 | tristate "Support for user-space parallel port device drivers" | |
142 | depends on PARPORT | |
143 | ---help--- | |
144 | Saying Y to this adds support for /dev/parport device nodes. This | |
145 | is needed for programs that want portable access to the parallel | |
146 | port, for instance deviceid (which displays Plug-and-Play device | |
147 | IDs). | |
148 | ||
149 | This is the parallel port equivalent of SCSI generic support (sg). | |
150 | It is safe to say N to this -- it is not needed for normal printing | |
151 | or parallel port CD-ROM/disk support. | |
152 | ||
153 | To compile this driver as a module, choose M here: the | |
154 | module will be called ppdev. | |
155 | ||
156 | If unsure, say N. | |
157 | ||
bdcffc5a | 158 | source "drivers/tty/hvc/Kconfig" |
5427bcf5 | 159 | |
31610434 | 160 | config VIRTIO_CONSOLE |
7721c494 CB |
161 | tristate "Virtio console" |
162 | depends on VIRTIO | |
31610434 | 163 | select HVC_DRIVER |
7721c494 CB |
164 | help |
165 | Virtio console for use with lguest and other hypervisors. | |
166 | ||
fb08bd27 AS |
167 | Also serves as a general-purpose serial device for data |
168 | transfer between the guest and host. Character devices at | |
169 | /dev/vportNpn will be created when corresponding ports are | |
170 | found, where N is the device number and n is the port number | |
171 | within that device. If specified by the host, a sysfs | |
172 | attribute called 'name' will be populated with a name for | |
173 | the port which can be used by udev scripts to create a | |
174 | symlink to the device. | |
31610434 | 175 | |
fe9e8d53 SR |
176 | config IBM_BSR |
177 | tristate "IBM POWER Barrier Synchronization Register support" | |
178 | depends on PPC_PSERIES | |
179 | help | |
180 | This devices exposes a hardware mechanism for fast synchronization | |
181 | of threads across a large system which avoids bouncing a cacheline | |
182 | between several cores on a system | |
183 | ||
1da177e4 LT |
184 | source "drivers/char/ipmi/Kconfig" |
185 | ||
1da177e4 LT |
186 | config DS1620 |
187 | tristate "NetWinder thermometer support" | |
188 | depends on ARCH_NETWINDER | |
189 | help | |
190 | Say Y here to include support for the thermal management hardware | |
191 | found in the NetWinder. This driver allows the user to control the | |
192 | temperature set points and to read the current temperature. | |
193 | ||
194 | It is also possible to say M here to build it as a module (ds1620) | |
195 | It is recommended to be used on a NetWinder, but it is not a | |
196 | necessity. | |
197 | ||
198 | config NWBUTTON | |
199 | tristate "NetWinder Button" | |
200 | depends on ARCH_NETWINDER | |
201 | ---help--- | |
202 | If you say Y here and create a character device node /dev/nwbutton | |
203 | with major and minor numbers 10 and 158 ("man mknod"), then every | |
204 | time the orange button is pressed a number of times, the number of | |
205 | times the button was pressed will be written to that device. | |
206 | ||
207 | This is most useful for applications, as yet unwritten, which | |
208 | perform actions based on how many times the button is pressed in a | |
209 | row. | |
210 | ||
211 | Do not hold the button down for too long, as the driver does not | |
212 | alter the behaviour of the hardware reset circuitry attached to the | |
213 | button; it will still execute a hard reset if the button is held | |
214 | down for longer than approximately five seconds. | |
215 | ||
216 | To compile this driver as a module, choose M here: the | |
217 | module will be called nwbutton. | |
218 | ||
219 | Most people will answer Y to this question and "Reboot Using Button" | |
220 | below to be able to initiate a system shutdown from the button. | |
221 | ||
222 | config NWBUTTON_REBOOT | |
223 | bool "Reboot Using Button" | |
224 | depends on NWBUTTON | |
225 | help | |
226 | If you say Y here, then you will be able to initiate a system | |
227 | shutdown and reboot by pressing the orange button a number of times. | |
228 | The number of presses to initiate the shutdown is two by default, | |
229 | but this can be altered by modifying the value of NUM_PRESSES_REBOOT | |
230 | in nwbutton.h and recompiling the driver or, if you compile the | |
231 | driver as a module, you can specify the number of presses at load | |
232 | time with "insmod button reboot_count=<something>". | |
233 | ||
234 | config NWFLASH | |
235 | tristate "NetWinder flash support" | |
236 | depends on ARCH_NETWINDER | |
237 | ---help--- | |
238 | If you say Y here and create a character device /dev/flash with | |
239 | major 10 and minor 160 you can manipulate the flash ROM containing | |
240 | the NetWinder firmware. Be careful as accidentally overwriting the | |
241 | flash contents can render your computer unbootable. On no account | |
242 | allow random users access to this device. :-) | |
243 | ||
244 | To compile this driver as a module, choose M here: the | |
245 | module will be called nwflash. | |
246 | ||
247 | If you're not sure, say N. | |
248 | ||
844dd05f MB |
249 | source "drivers/char/hw_random/Kconfig" |
250 | ||
1da177e4 LT |
251 | config NVRAM |
252 | tristate "/dev/nvram support" | |
807a96cd | 253 | depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM |
1da177e4 LT |
254 | ---help--- |
255 | If you say Y here and create a character special file /dev/nvram | |
256 | with major number 10 and minor number 144 using mknod ("man mknod"), | |
257 | you get read and write access to the extra bytes of non-volatile | |
258 | memory in the real time clock (RTC), which is contained in every PC | |
259 | and most Ataris. The actual number of bytes varies, depending on the | |
260 | nvram in the system, but is usually 114 (128-14 for the RTC). | |
261 | ||
262 | This memory is conventionally called "CMOS RAM" on PCs and "NVRAM" | |
263 | on Ataris. /dev/nvram may be used to view settings there, or to | |
264 | change them (with some utility). It could also be used to frequently | |
265 | save a few bits of very important data that may not be lost over | |
266 | power-off and for which writing to disk is too insecure. Note | |
267 | however that most NVRAM space in a PC belongs to the BIOS and you | |
268 | should NEVER idly tamper with it. See Ralf Brown's interrupt list | |
269 | for a guide to the use of CMOS bytes by your BIOS. | |
270 | ||
271 | On Atari machines, /dev/nvram is always configured and does not need | |
272 | to be selected. | |
273 | ||
274 | To compile this driver as a module, choose M here: the | |
275 | module will be called nvram. | |
276 | ||
c7500900 DB |
277 | # |
278 | # These legacy RTC drivers just cause too many conflicts with the generic | |
279 | # RTC framework ... let's not even try to coexist any more. | |
280 | # | |
281 | if RTC_LIB=n | |
282 | ||
1da177e4 | 283 | config RTC |
e6d2bb2b | 284 | tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" |
c7500900 | 285 | depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ |
3369465e | 286 | && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML |
1da177e4 LT |
287 | ---help--- |
288 | If you say Y here and create a character special file /dev/rtc with | |
289 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
290 | will get access to the real time clock (or hardware clock) built | |
291 | into your computer. | |
292 | ||
293 | Every PC has such a clock built in. It can be used to generate | |
294 | signals from as low as 1Hz up to 8192Hz, and can also be used | |
295 | as a 24 hour alarm. It reports status information via the file | |
296 | /proc/driver/rtc and its behaviour is set by various ioctls on | |
297 | /dev/rtc. | |
298 | ||
299 | If you run Linux on a multiprocessor machine and said Y to | |
300 | "Symmetric Multi Processing" above, you should say Y here to read | |
301 | and set the RTC in an SMP compatible fashion. | |
302 | ||
303 | If you think you have a use for such a device (such as periodic data | |
304 | sampling), then say Y here, and read <file:Documentation/rtc.txt> | |
305 | for details. | |
306 | ||
307 | To compile this driver as a module, choose M here: the | |
308 | module will be called rtc. | |
309 | ||
2240598c AV |
310 | config JS_RTC |
311 | tristate "Enhanced Real Time Clock Support" | |
312 | depends on SPARC32 && PCI | |
313 | ---help--- | |
314 | If you say Y here and create a character special file /dev/rtc with | |
315 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
316 | will get access to the real time clock (or hardware clock) built | |
317 | into your computer. | |
318 | ||
319 | Every PC has such a clock built in. It can be used to generate | |
320 | signals from as low as 1Hz up to 8192Hz, and can also be used | |
321 | as a 24 hour alarm. It reports status information via the file | |
322 | /proc/driver/rtc and its behaviour is set by various ioctls on | |
323 | /dev/rtc. | |
324 | ||
325 | If you think you have a use for such a device (such as periodic data | |
326 | sampling), then say Y here, and read <file:Documentation/rtc.txt> | |
327 | for details. | |
328 | ||
329 | To compile this driver as a module, choose M here: the | |
330 | module will be called js-rtc. | |
331 | ||
1da177e4 LT |
332 | config GEN_RTC |
333 | tristate "Generic /dev/rtc emulation" | |
3369465e | 334 | depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML |
1da177e4 LT |
335 | ---help--- |
336 | If you say Y here and create a character special file /dev/rtc with | |
337 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
338 | will get access to the real time clock (or hardware clock) built | |
339 | into your computer. | |
340 | ||
341 | It reports status information via the file /proc/driver/rtc and its | |
342 | behaviour is set by various ioctls on /dev/rtc. If you enable the | |
343 | "extended RTC operation" below it will also provide an emulation | |
344 | for RTC_UIE which is required by some programs and may improve | |
345 | precision in some cases. | |
346 | ||
347 | To compile this driver as a module, choose M here: the | |
348 | module will be called genrtc. | |
349 | ||
350 | config GEN_RTC_X | |
351 | bool "Extended RTC operation" | |
352 | depends on GEN_RTC | |
353 | help | |
354 | Provides an emulation for RTC_UIE which is required by some programs | |
355 | and may improve precision of the generic RTC support in some cases. | |
356 | ||
357 | config EFI_RTC | |
358 | bool "EFI Real Time Clock Services" | |
359 | depends on IA64 | |
360 | ||
361 | config DS1302 | |
362 | tristate "DS1302 RTC support" | |
363 | depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT) | |
364 | help | |
365 | If you say Y here and create a character special file /dev/rtc with | |
366 | major number 121 and minor number 0 using mknod ("man mknod"), you | |
367 | will get access to the real time clock (or hardware clock) built | |
368 | into your computer. | |
369 | ||
c7500900 DB |
370 | endif # RTC_LIB |
371 | ||
1da177e4 LT |
372 | config DTLK |
373 | tristate "Double Talk PC internal speech card support" | |
eeca7a36 | 374 | depends on ISA |
1da177e4 LT |
375 | help |
376 | This driver is for the DoubleTalk PC, a speech synthesizer | |
377 | manufactured by RC Systems (<http://www.rcsys.com/>). It is also | |
378 | called the `internal DoubleTalk'. | |
379 | ||
380 | To compile this driver as a module, choose M here: the | |
381 | module will be called dtlk. | |
382 | ||
ef141a0b SN |
383 | config XILINX_HWICAP |
384 | tristate "Xilinx HWICAP Support" | |
6fa612b5 | 385 | depends on XILINX_VIRTEX || MICROBLAZE |
ef141a0b SN |
386 | help |
387 | This option enables support for Xilinx Internal Configuration | |
388 | Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex | |
389 | FPGA platforms to partially reconfigure the FPGA at runtime. | |
390 | ||
391 | If unsure, say N. | |
392 | ||
1da177e4 LT |
393 | config R3964 |
394 | tristate "Siemens R3964 line discipline" | |
395 | ---help--- | |
396 | This driver allows synchronous communication with devices using the | |
397 | Siemens R3964 packet protocol. Unless you are dealing with special | |
398 | hardware like PLCs, you are unlikely to need this. | |
399 | ||
400 | To compile this driver as a module, choose M here: the | |
401 | module will be called n_r3964. | |
402 | ||
403 | If unsure, say N. | |
404 | ||
405 | config APPLICOM | |
406 | tristate "Applicom intelligent fieldbus card support" | |
407 | depends on PCI | |
408 | ---help--- | |
409 | This driver provides the kernel-side support for the intelligent | |
410 | fieldbus cards made by Applicom International. More information | |
411 | about these cards can be found on the WWW at the address | |
412 | <http://www.applicom-int.com/>, or by email from David Woodhouse | |
413 | <dwmw2@infradead.org>. | |
414 | ||
415 | To compile this driver as a module, choose M here: the | |
416 | module will be called applicom. | |
417 | ||
418 | If unsure, say N. | |
419 | ||
420 | config SONYPI | |
65929215 GKH |
421 | tristate "Sony Vaio Programmable I/O Control Device support" |
422 | depends on X86 && PCI && INPUT && !64BIT | |
1da177e4 LT |
423 | ---help--- |
424 | This driver enables access to the Sony Programmable I/O Control | |
425 | Device which can be found in many (all ?) Sony Vaio laptops. | |
426 | ||
427 | If you have one of those laptops, read | |
018a651a | 428 | <file:Documentation/laptops/sonypi.txt>, and say Y or M here. |
1da177e4 LT |
429 | |
430 | To compile this driver as a module, choose M here: the | |
431 | module will be called sonypi. | |
432 | ||
09762516 YY |
433 | config GPIO_TB0219 |
434 | tristate "TANBAC TB0219 GPIO support" | |
bef1f402 | 435 | depends on TANBAC_TB022X |
584e1236 | 436 | select GPIO_VR41XX |
1da177e4 | 437 | |
1da177e4 LT |
438 | source "drivers/char/pcmcia/Kconfig" |
439 | ||
440 | config MWAVE | |
441 | tristate "ACP Modem (Mwave) support" | |
442 | depends on X86 | |
443 | select SERIAL_8250 | |
444 | ---help--- | |
445 | The ACP modem (Mwave) for Linux is a WinModem. It is composed of a | |
446 | kernel driver and a user level application. Together these components | |
447 | support direct attachment to public switched telephone networks (PSTNs) | |
448 | and support selected world wide countries. | |
449 | ||
450 | This version of the ACP Modem driver supports the IBM Thinkpad 600E, | |
451 | 600, and 770 that include on board ACP modem hardware. | |
452 | ||
453 | The modem also supports the standard communications port interface | |
454 | (ttySx) and is compatible with the Hayes AT Command Set. | |
455 | ||
456 | The user level application needed to use this driver can be found at | |
457 | the IBM Linux Technology Center (LTC) web site: | |
458 | <http://www.ibm.com/linux/ltc/>. | |
459 | ||
460 | If you own one of the above IBM Thinkpads which has the Mwave chipset | |
461 | in it, say Y. | |
462 | ||
463 | To compile this driver as a module, choose M here: the | |
464 | module will be called mwave. | |
465 | ||
466 | config SCx200_GPIO | |
467 | tristate "NatSemi SCx200 GPIO Support" | |
468 | depends on SCx200 | |
7a8e2a5e | 469 | select NSC_GPIO |
1da177e4 LT |
470 | help |
471 | Give userspace access to the GPIO pins on the National | |
472 | Semiconductor SCx200 processors. | |
473 | ||
474 | If compiled as a module, it will be called scx200_gpio. | |
475 | ||
7a8e2a5e JC |
476 | config PC8736x_GPIO |
477 | tristate "NatSemi PC8736x GPIO Support" | |
3369465e | 478 | depends on X86_32 && !UML |
7a8e2a5e JC |
479 | default SCx200_GPIO # mostly N |
480 | select NSC_GPIO # needed for support routines | |
481 | help | |
482 | Give userspace access to the GPIO pins on the National | |
483 | Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip | |
484 | has multiple functional units, inc several managed by | |
485 | hwmon/pc87360 driver. Tested with PC-87366 | |
486 | ||
487 | If compiled as a module, it will be called pc8736x_gpio. | |
488 | ||
489 | config NSC_GPIO | |
490 | tristate "NatSemi Base GPIO Support" | |
699352c3 | 491 | depends on X86_32 |
7a8e2a5e JC |
492 | # selected by SCx200_GPIO and PC8736x_GPIO |
493 | # what about 2 selectors differing: m != y | |
494 | help | |
495 | Common support used (and needed) by scx200_gpio and | |
496 | pc8736x_gpio drivers. If those drivers are built as | |
497 | modules, this one will be too, named nsc_gpio | |
498 | ||
1da177e4 | 499 | config RAW_DRIVER |
abd4aa5a | 500 | tristate "RAW driver (/dev/raw/rawN)" |
9361401e | 501 | depends on BLOCK |
1da177e4 | 502 | help |
abd4aa5a DJ |
503 | The raw driver permits block devices to be bound to /dev/raw/rawN. |
504 | Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. | |
1da177e4 LT |
505 | See the raw(8) manpage for more details. |
506 | ||
abd4aa5a | 507 | Applications should preferably open the device (eg /dev/hda1) |
1da177e4 LT |
508 | with the O_DIRECT flag. |
509 | ||
0de502aa | 510 | config MAX_RAW_DEVS |
0078bff5 | 511 | int "Maximum number of RAW devices to support (1-65536)" |
0de502aa AM |
512 | depends on RAW_DRIVER |
513 | default "256" | |
514 | help | |
515 | The maximum number of RAW devices that are supported. | |
516 | Default is 256. Increase this number in case you need lots of | |
517 | raw devices. | |
518 | ||
1da177e4 LT |
519 | config HPET |
520 | bool "HPET - High Precision Event Timer" if (X86 || IA64) | |
521 | default n | |
522 | depends on ACPI | |
523 | help | |
524 | If you say Y here, you will have a miscdevice named "/dev/hpet/". Each | |
525 | open selects one of the timers supported by the HPET. The timers are | |
3cb2fccc | 526 | non-periodic and/or periodic. |
1da177e4 | 527 | |
1da177e4 LT |
528 | config HPET_MMAP |
529 | bool "Allow mmap of HPET" | |
530 | default y | |
531 | depends on HPET | |
532 | help | |
533 | If you say Y here, user applications will be able to mmap | |
534 | the HPET registers. | |
535 | ||
536 | In some hardware implementations, the page containing HPET | |
537 | registers may also contain other things that shouldn't be | |
538 | exposed to the user. If this applies to your hardware, | |
539 | say N here. | |
540 | ||
1da177e4 LT |
541 | config HANGCHECK_TIMER |
542 | tristate "Hangcheck timer" | |
abf3ea1b | 543 | depends on X86 || IA64 || PPC64 || S390 |
1da177e4 LT |
544 | help |
545 | The hangcheck-timer module detects when the system has gone | |
546 | out to lunch past a certain margin. It can reboot the system | |
547 | or merely print a warning. | |
548 | ||
549 | config MMTIMER | |
550 | tristate "MMTIMER Memory mapped RTC for SGI Altix" | |
551 | depends on IA64_GENERIC || IA64_SGI_SN2 | |
552 | default y | |
553 | help | |
554 | The mmtimer device allows direct userspace access to the | |
555 | Altix system timer. | |
556 | ||
fbd8ae10 DS |
557 | config UV_MMTIMER |
558 | tristate "UV_MMTIMER Memory mapped RTC for SGI UV" | |
559 | depends on X86_UV | |
560 | default m | |
561 | help | |
562 | The uv_mmtimer device allows direct userspace access to the | |
563 | UV system timer. | |
564 | ||
1da177e4 LT |
565 | source "drivers/char/tpm/Kconfig" |
566 | ||
1a80ba88 | 567 | config TELCLOCK |
03154a27 | 568 | tristate "Telecom clock driver for ATCA SBC" |
65929215 | 569 | depends on X86 |
1a80ba88 MG |
570 | default n |
571 | help | |
03154a27 MG |
572 | The telecom clock device is specific to the MPCBL0010 and MPCBL0050 |
573 | ATCA computers and allows direct userspace access to the | |
574 | configuration of the telecom clock configuration settings. This | |
575 | device is used for hardware synchronization across the ATCA backplane | |
576 | fabric. Upon loading, the driver exports a sysfs directory, | |
577 | /sys/devices/platform/telco_clock, with a number of files for | |
578 | controlling the behavior of this hardware. | |
1a80ba88 | 579 | |
4f911d64 RK |
580 | config DEVPORT |
581 | bool | |
582 | depends on !M68K | |
583 | depends on ISA || PCI | |
584 | default y | |
585 | ||
61d48c2c MS |
586 | source "drivers/s390/char/Kconfig" |
587 | ||
73210a13 NV |
588 | config MSM_SMD_PKT |
589 | bool "Enable device interface for some SMD packet ports" | |
590 | default n | |
591 | depends on MSM_SMD | |
592 | help | |
593 | Enables userspace clients to read and write to some packet SMD | |
594 | ports via device interface for MSM chipset. | |
595 | ||
dbcb4a1a CM |
596 | config TILE_SROM |
597 | bool "Character-device access via hypervisor to the Tilera SPI ROM" | |
598 | depends on TILE | |
599 | default y | |
600 | ---help--- | |
601 | This device provides character-level read-write access | |
602 | to the SROM, typically via the "0", "1", and "2" devices | |
603 | in /dev/srom/. The Tilera hypervisor makes the flash | |
604 | device appear much like a simple EEPROM, and knows | |
605 | how to partition a single ROM for multiple purposes. | |
606 | ||
1da177e4 LT |
607 | endmenu |
608 |