Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Character device configuration | |
3 | # | |
4 | ||
5 | menu "Character devices" | |
6 | ||
7 | config VT | |
8 | bool "Virtual terminal" if EMBEDDED | |
abf3ea1b | 9 | depends on !S390 |
1da177e4 | 10 | select INPUT |
4c514a5a | 11 | default y |
1da177e4 LT |
12 | ---help--- |
13 | If you say Y here, you will get support for terminal devices with | |
14 | display and keyboard devices. These are called "virtual" because you | |
15 | can run several virtual terminals (also called virtual consoles) on | |
16 | one physical terminal. This is rather useful, for example one | |
17 | virtual terminal can collect system messages and warnings, another | |
18 | one can be used for a text-mode user session, and a third could run | |
19 | an X session, all in parallel. Switching between virtual terminals | |
20 | is done with certain key combinations, usually Alt-<function key>. | |
21 | ||
22 | The setterm command ("man setterm") can be used to change the | |
23 | properties (such as colors or beeping) of a virtual terminal. The | |
24 | man page console_codes(4) ("man console_codes") contains the special | |
25 | character sequences that can be used to change those properties | |
26 | directly. The fonts used on virtual terminals can be changed with | |
27 | the setfont ("man setfont") command and the key bindings are defined | |
28 | with the loadkeys ("man loadkeys") command. | |
29 | ||
30 | You need at least one virtual terminal device in order to make use | |
31 | of your keyboard and monitor. Therefore, only people configuring an | |
32 | embedded system would want to say N here in order to save some | |
33 | memory; the only way to log into such a system is then via a serial | |
34 | or network connection. | |
35 | ||
36 | If unsure, say Y, or else you won't be able to do much with your new | |
37 | shiny Linux system :-) | |
38 | ||
a29ccf6f DW |
39 | config CONSOLE_TRANSLATIONS |
40 | depends on VT | |
41 | default y | |
42 | bool "Enable character translations in console" if EMBEDDED | |
43 | ---help--- | |
44 | This enables support for font mapping and Unicode translation | |
45 | on virtual consoles. | |
46 | ||
1da177e4 LT |
47 | config VT_CONSOLE |
48 | bool "Support for console on virtual terminal" if EMBEDDED | |
49 | depends on VT | |
50 | default y | |
51 | ---help--- | |
52 | The system console is the device which receives all kernel messages | |
53 | and warnings and which allows logins in single user mode. If you | |
54 | answer Y here, a virtual terminal (the device used to interact with | |
55 | a physical terminal) can be used as system console. This is the most | |
56 | common mode of operations, so you should say Y here unless you want | |
57 | the kernel messages be output only to a serial port (in which case | |
58 | you should say Y to "Console on serial port", below). | |
59 | ||
60 | If you do say Y here, by default the currently visible virtual | |
61 | terminal (/dev/tty0) will be used as system console. You can change | |
62 | that with a kernel command line option such as "console=tty3" which | |
63 | would use the third virtual terminal as system console. (Try "man | |
64 | bootparam" or see the documentation of your boot loader (lilo or | |
65 | loadlin) about how to pass options to the kernel at boot time.) | |
66 | ||
67 | If unsure, say Y. | |
68 | ||
69 | config HW_CONSOLE | |
70 | bool | |
71 | depends on VT && !S390 && !UML | |
72 | default y | |
73 | ||
13ae6645 AD |
74 | config VT_HW_CONSOLE_BINDING |
75 | bool "Support for binding and unbinding console drivers" | |
76 | depends on HW_CONSOLE | |
77 | default n | |
78 | ---help--- | |
79 | The virtual terminal is the device that interacts with the physical | |
80 | terminal through console drivers. On these systems, at least one | |
81 | console driver is loaded. In other configurations, additional console | |
82 | drivers may be enabled, such as the framebuffer console. If more than | |
83 | 1 console driver is enabled, setting this to 'y' will allow you to | |
84 | select the console driver that will serve as the backend for the | |
85 | virtual terminals. | |
86 | ||
87 | See <file:Documentation/console/console.txt> for more | |
88 | information. For framebuffer console users, please refer to | |
89 | <file:Documentation/fb/fbcon.txt>. | |
90 | ||
b781ecb6 AV |
91 | config DEVKMEM |
92 | bool "/dev/kmem virtual device support" | |
93 | default y | |
94 | help | |
95 | Say Y here if you want to support the /dev/kmem device. The | |
96 | /dev/kmem device is rarely used, but can be used for certain | |
97 | kind of kernel debugging operations. | |
98 | When in doubt, say "N". | |
99 | ||
0b914218 MF |
100 | config BFIN_JTAG_COMM |
101 | tristate "Blackfin JTAG Communication" | |
102 | depends on BLACKFIN | |
103 | help | |
104 | Add support for emulating a TTY device over the Blackfin JTAG. | |
105 | ||
106 | To compile this driver as a module, choose M here: the | |
107 | module will be called bfin_jtag_comm. | |
108 | ||
109 | config BFIN_JTAG_COMM_CONSOLE | |
110 | bool "Console on Blackfin JTAG" | |
111 | depends on BFIN_JTAG_COMM=y | |
112 | ||
1da177e4 LT |
113 | config SERIAL_NONSTANDARD |
114 | bool "Non-standard serial port support" | |
eeca7a36 | 115 | depends on HAS_IOMEM |
1da177e4 LT |
116 | ---help--- |
117 | Say Y here if you have any non-standard serial boards -- boards | |
118 | which aren't supported using the standard "dumb" serial driver. | |
119 | This includes intelligent serial boards such as Cyclades, | |
120 | Digiboards, etc. These are usually used for systems that need many | |
121 | serial ports because they serve many terminals or dial-in | |
122 | connections. | |
123 | ||
124 | Note that the answer to this question won't directly affect the | |
125 | kernel: saying N will just cause the configurator to skip all | |
126 | the questions about non-standard serial boards. | |
127 | ||
128 | Most people can say N here. | |
129 | ||
130 | config COMPUTONE | |
131 | tristate "Computone IntelliPort Plus serial support" | |
3b4709a6 | 132 | depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) |
1da177e4 LT |
133 | ---help--- |
134 | This driver supports the entire family of Intelliport II/Plus | |
135 | controllers with the exception of the MicroChannel controllers and | |
136 | products previous to the Intelliport II. These are multiport cards, | |
137 | which give you many serial ports. You would need something like this | |
138 | to connect more than two modems to your Linux box, for instance in | |
139 | order to become a dial-in server. If you have a card like that, say | |
31c00fc1 | 140 | Y here and read <file:Documentation/serial/computone.txt>. |
1da177e4 | 141 | |
33dda515 RK |
142 | To compile this driver as module, choose M here: the |
143 | module will be called ip2. | |
1da177e4 LT |
144 | |
145 | config ROCKETPORT | |
146 | tristate "Comtrol RocketPort support" | |
27d41718 | 147 | depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) |
1da177e4 LT |
148 | help |
149 | This driver supports Comtrol RocketPort and RocketModem PCI boards. | |
150 | These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or | |
151 | modems. For information about the RocketPort/RocketModem boards | |
31c00fc1 | 152 | and this driver read <file:Documentation/serial/rocket.txt>. |
1da177e4 LT |
153 | |
154 | To compile this driver as a module, choose M here: the | |
155 | module will be called rocket. | |
156 | ||
157 | If you want to compile this driver into the kernel, say Y here. If | |
158 | you don't have a Comtrol RocketPort/RocketModem card installed, say N. | |
159 | ||
160 | config CYCLADES | |
161 | tristate "Cyclades async mux support" | |
cff9494f | 162 | depends on SERIAL_NONSTANDARD && (PCI || ISA) |
ee2077d9 | 163 | select FW_LOADER |
1da177e4 LT |
164 | ---help--- |
165 | This driver supports Cyclades Z and Y multiserial boards. | |
166 | You would need something like this to connect more than two modems to | |
167 | your Linux box, for instance in order to become a dial-in server. | |
168 | ||
169 | For information about the Cyclades-Z card, read | |
31c00fc1 | 170 | <file:Documentation/serial/README.cycladesZ>. |
1da177e4 LT |
171 | |
172 | To compile this driver as a module, choose M here: the | |
173 | module will be called cyclades. | |
174 | ||
175 | If you haven't heard about it, it's safe to say N. | |
176 | ||
177 | config CYZ_INTR | |
178 | bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" | |
179 | depends on EXPERIMENTAL && CYCLADES | |
180 | help | |
181 | The Cyclades-Z family of multiport cards allows 2 (two) driver op | |
182 | modes: polling and interrupt. In polling mode, the driver will check | |
183 | the status of the Cyclades-Z ports every certain amount of time | |
184 | (which is called polling cycle and is configurable). In interrupt | |
185 | mode, it will use an interrupt line (IRQ) in order to check the | |
186 | status of the Cyclades-Z ports. The default op mode is polling. If | |
187 | unsure, say N. | |
188 | ||
189 | config DIGIEPCA | |
190 | tristate "Digiboard Intelligent Async Support" | |
dcbf1280 | 191 | depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) |
1da177e4 LT |
192 | ---help--- |
193 | This is a driver for Digi International's Xx, Xeve, and Xem series | |
194 | of cards which provide multiple serial ports. You would need | |
195 | something like this to connect more than two modems to your Linux | |
196 | box, for instance in order to become a dial-in server. This driver | |
197 | supports the original PC (ISA) boards as well as PCI, and EISA. If | |
198 | you have a card like this, say Y here and read the file | |
31c00fc1 | 199 | <file:Documentation/serial/digiepca.txt>. |
1da177e4 LT |
200 | |
201 | To compile this driver as a module, choose M here: the | |
202 | module will be called epca. | |
203 | ||
204 | config ESPSERIAL | |
205 | tristate "Hayes ESP serial port support" | |
0fdeceb8 | 206 | depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN |
1da177e4 LT |
207 | help |
208 | This is a driver which supports Hayes ESP serial ports. Both single | |
209 | port cards and multiport cards are supported. Make sure to read | |
210 | <file:Documentation/hayes-esp.txt>. | |
211 | ||
212 | To compile this driver as a module, choose M here: the | |
213 | module will be called esp. | |
214 | ||
215 | If unsure, say N. | |
216 | ||
217 | config MOXA_INTELLIO | |
218 | tristate "Moxa Intellio support" | |
8a023674 | 219 | depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) |
4920916f | 220 | select FW_LOADER |
1da177e4 LT |
221 | help |
222 | Say Y here if you have a Moxa Intellio multiport serial card. | |
223 | ||
224 | To compile this driver as a module, choose M here: the | |
225 | module will be called moxa. | |
226 | ||
227 | config MOXA_SMARTIO | |
98c47ea2 | 228 | tristate "Moxa SmartIO support v. 2.0" |
fb0c9295 | 229 | depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) |
037ad48b JS |
230 | help |
231 | Say Y here if you have a Moxa SmartIO multiport serial card and/or | |
232 | want to help develop a new version of this driver. | |
233 | ||
234 | This is upgraded (1.9.1) driver from original Moxa drivers with | |
235 | changes finally resulting in PCI probing. | |
236 | ||
037ad48b | 237 | This driver can also be built as a module. The module will be called |
1c45607a | 238 | mxser. If you want to do that, say M here. |
037ad48b | 239 | |
1da177e4 LT |
240 | config ISI |
241 | tristate "Multi-Tech multiport card support (EXPERIMENTAL)" | |
6d889724 | 242 | depends on SERIAL_NONSTANDARD && PCI |
5ff2a7e2 | 243 | select FW_LOADER |
1da177e4 LT |
244 | help |
245 | This is a driver for the Multi-Tech cards which provide several | |
246 | serial ports. The driver is experimental and can currently only be | |
247 | built as a module. The module will be called isicom. | |
248 | If you want to do that, choose M here. | |
249 | ||
250 | config SYNCLINK | |
251 | tristate "Microgate SyncLink card support" | |
a5532606 | 252 | depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API |
1da177e4 LT |
253 | help |
254 | Provides support for the SyncLink ISA and PCI multiprotocol serial | |
255 | adapters. These adapters support asynchronous and HDLC bit | |
256 | synchronous communication up to 10Mbps (PCI adapter). | |
257 | ||
258 | This driver can only be built as a module ( = code which can be | |
259 | inserted in and removed from the running kernel whenever you want). | |
260 | The module will be called synclink. If you want to do that, say M | |
261 | here. | |
262 | ||
263 | config SYNCLINKMP | |
264 | tristate "SyncLink Multiport support" | |
8a023674 | 265 | depends on SERIAL_NONSTANDARD && PCI |
1da177e4 LT |
266 | help |
267 | Enable support for the SyncLink Multiport (2 or 4 ports) | |
268 | serial adapter, running asynchronous and HDLC communications up | |
269 | to 2.048Mbps. Each ports is independently selectable for | |
270 | RS-232, V.35, RS-449, RS-530, and X.21 | |
271 | ||
272 | This driver may be built as a module ( = code which can be | |
273 | inserted in and removed from the running kernel whenever you want). | |
274 | The module will be called synclinkmp. If you want to do that, say M | |
275 | here. | |
276 | ||
705b6c7b PF |
277 | config SYNCLINK_GT |
278 | tristate "SyncLink GT/AC support" | |
8ef9cf31 | 279 | depends on SERIAL_NONSTANDARD && PCI |
705b6c7b PF |
280 | help |
281 | Support for SyncLink GT and SyncLink AC families of | |
282 | synchronous and asynchronous serial adapters | |
283 | manufactured by Microgate Systems, Ltd. (www.microgate.com) | |
284 | ||
1da177e4 LT |
285 | config N_HDLC |
286 | tristate "HDLC line discipline support" | |
287 | depends on SERIAL_NONSTANDARD | |
288 | help | |
289 | Allows synchronous HDLC communications with tty device drivers that | |
290 | support synchronous HDLC such as the Microgate SyncLink adapter. | |
291 | ||
292 | This driver can only be built as a module ( = code which can be | |
293 | inserted in and removed from the running kernel whenever you want). | |
294 | The module will be called n_hdlc. If you want to do that, say M | |
295 | here. | |
296 | ||
297 | config RISCOM8 | |
298 | tristate "SDL RISCom/8 card support" | |
781cff5c | 299 | depends on SERIAL_NONSTANDARD |
1da177e4 LT |
300 | help |
301 | This is a driver for the SDL Communications RISCom/8 multiport card, | |
302 | which gives you many serial ports. You would need something like | |
303 | this to connect more than two modems to your Linux box, for instance | |
304 | in order to become a dial-in server. If you have a card like that, | |
31c00fc1 | 305 | say Y here and read the file <file:Documentation/serial/riscom8.txt>. |
1da177e4 LT |
306 | |
307 | Also it's possible to say M here and compile this driver as kernel | |
308 | loadable module; the module will be called riscom8. | |
309 | ||
310 | config SPECIALIX | |
311 | tristate "Specialix IO8+ card support" | |
faa7612c | 312 | depends on SERIAL_NONSTANDARD |
1da177e4 LT |
313 | help |
314 | This is a driver for the Specialix IO8+ multiport card (both the | |
315 | ISA and the PCI version) which gives you many serial ports. You | |
316 | would need something like this to connect more than two modems to | |
317 | your Linux box, for instance in order to become a dial-in server. | |
318 | ||
319 | If you have a card like that, say Y here and read the file | |
31c00fc1 RD |
320 | <file:Documentation/serial/specialix.txt>. Also it's possible to say |
321 | M here and compile this driver as kernel loadable module which will be | |
1da177e4 LT |
322 | called specialix. |
323 | ||
1da177e4 LT |
324 | config SX |
325 | tristate "Specialix SX (and SI) card support" | |
3468a33e | 326 | depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) |
1da177e4 LT |
327 | help |
328 | This is a driver for the SX and SI multiport serial cards. | |
31c00fc1 | 329 | Please read the file <file:Documentation/serial/sx.txt> for details. |
1da177e4 LT |
330 | |
331 | This driver can only be built as a module ( = code which can be | |
332 | inserted in and removed from the running kernel whenever you want). | |
333 | The module will be called sx. If you want to do that, say M here. | |
334 | ||
335 | config RIO | |
336 | tristate "Specialix RIO system support" | |
655fdeab | 337 | depends on SERIAL_NONSTANDARD |
1da177e4 LT |
338 | help |
339 | This is a driver for the Specialix RIO, a smart serial card which | |
340 | drives an outboard box that can support up to 128 ports. Product | |
341 | information is at <http://www.perle.com/support/documentation.html#multiport>. | |
342 | There are both ISA and PCI versions. | |
343 | ||
344 | config RIO_OLDPCI | |
345 | bool "Support really old RIO/PCI cards" | |
346 | depends on RIO | |
347 | help | |
348 | Older RIO PCI cards need some initialization-time configuration to | |
349 | determine the IRQ and some control addresses. If you have a RIO and | |
350 | this doesn't seem to work, try setting this to Y. | |
351 | ||
352 | config STALDRV | |
353 | bool "Stallion multiport serial support" | |
354 | depends on SERIAL_NONSTANDARD | |
355 | help | |
356 | Stallion cards give you many serial ports. You would need something | |
357 | like this to connect more than two modems to your Linux box, for | |
358 | instance in order to become a dial-in server. If you say Y here, | |
359 | you will be asked for your specific card model in the next | |
31c00fc1 RD |
360 | questions. Make sure to read <file:Documentation/serial/stallion.txt> |
361 | in this case. If you have never heard about all this, it's safe to | |
1da177e4 LT |
362 | say N. |
363 | ||
364 | config STALLION | |
365 | tristate "Stallion EasyIO or EC8/32 support" | |
d18a750f | 366 | depends on STALDRV && (ISA || EISA || PCI) |
1da177e4 LT |
367 | help |
368 | If you have an EasyIO or EasyConnection 8/32 multiport Stallion | |
369 | card, then this is for you; say Y. Make sure to read | |
31c00fc1 | 370 | <file:Documentation/serial/stallion.txt>. |
1da177e4 LT |
371 | |
372 | To compile this driver as a module, choose M here: the | |
373 | module will be called stallion. | |
374 | ||
375 | config ISTALLION | |
376 | tristate "Stallion EC8/64, ONboard, Brumby support" | |
d18a750f | 377 | depends on STALDRV && (ISA || EISA || PCI) |
1da177e4 LT |
378 | help |
379 | If you have an EasyConnection 8/64, ONboard, Brumby or Stallion | |
380 | serial multiport card, say Y here. Make sure to read | |
31c00fc1 | 381 | <file:Documentation/serial/stallion.txt>. |
1da177e4 LT |
382 | |
383 | To compile this driver as a module, choose M here: the | |
384 | module will be called istallion. | |
385 | ||
20fd1e3b FS |
386 | config NOZOMI |
387 | tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" | |
388 | depends on PCI && EXPERIMENTAL | |
389 | help | |
390 | If you have a HSDPA driver Broadband Wireless Data Card - | |
391 | Globe Trotter PCMCIA card, say Y here. | |
392 | ||
393 | To compile this driver as a module, choose M here, the module | |
394 | will be called nozomi. | |
395 | ||
1da177e4 LT |
396 | config A2232 |
397 | tristate "Commodore A2232 serial support (EXPERIMENTAL)" | |
398 | depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP | |
399 | ---help--- | |
400 | This option supports the 2232 7-port serial card shipped with the | |
401 | Amiga 2000 and other Zorro-bus machines, dating from 1989. At | |
402 | a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip | |
403 | each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The | |
404 | ports were connected with 8 pin DIN connectors on the card bracket, | |
405 | for which 8 pin to DB25 adapters were supplied. The card also had | |
406 | jumpers internally to toggle various pinning configurations. | |
407 | ||
408 | This driver can be built as a module; but then "generic_serial" | |
409 | will also be built as a module. This has to be loaded before | |
410 | "ser_a2232". If you want to do this, answer M here. | |
411 | ||
412 | config SGI_SNSC | |
413 | bool "SGI Altix system controller communication support" | |
414 | depends on (IA64_SGI_SN2 || IA64_GENERIC) | |
415 | help | |
416 | If you have an SGI Altix and you want to enable system | |
417 | controller communication from user space (you want this!), | |
418 | say Y. Otherwise, say N. | |
419 | ||
e1e19747 BL |
420 | config SGI_TIOCX |
421 | bool "SGI TIO CX driver support" | |
422 | depends on (IA64_SGI_SN2 || IA64_GENERIC) | |
423 | help | |
424 | If you have an SGI Altix and you have fpga devices attached | |
425 | to your TIO, say Y here, otherwise say N. | |
426 | ||
427 | config SGI_MBCS | |
428 | tristate "SGI FPGA Core Services driver support" | |
ae40aae9 | 429 | depends on SGI_TIOCX |
e1e19747 BL |
430 | help |
431 | If you have an SGI Altix with an attached SABrick | |
432 | say Y or M here, otherwise say N. | |
433 | ||
1da177e4 LT |
434 | source "drivers/serial/Kconfig" |
435 | ||
436 | config UNIX98_PTYS | |
437 | bool "Unix98 PTY support" if EMBEDDED | |
438 | default y | |
439 | ---help--- | |
440 | A pseudo terminal (PTY) is a software device consisting of two | |
441 | halves: a master and a slave. The slave device behaves identical to | |
442 | a physical terminal; the master device is used by a process to | |
443 | read data from and write data to the slave, thereby emulating a | |
444 | terminal. Typical programs for the master side are telnet servers | |
445 | and xterms. | |
446 | ||
447 | Linux has traditionally used the BSD-like names /dev/ptyxx for | |
448 | masters and /dev/ttyxx for slaves of pseudo terminals. This scheme | |
449 | has a number of problems. The GNU C library glibc 2.1 and later, | |
450 | however, supports the Unix98 naming standard: in order to acquire a | |
451 | pseudo terminal, a process opens /dev/ptmx; the number of the pseudo | |
452 | terminal is then made available to the process and the pseudo | |
453 | terminal slave can be accessed as /dev/pts/<number>. What was | |
454 | traditionally /dev/ttyp2 will then be /dev/pts/2, for example. | |
455 | ||
456 | All modern Linux systems use the Unix98 ptys. Say Y unless | |
457 | you're on an embedded system and want to conserve memory. | |
458 | ||
e4adca27 SB |
459 | config DEVPTS_MULTIPLE_INSTANCES |
460 | bool "Support multiple instances of devpts" | |
461 | depends on UNIX98_PTYS | |
462 | default n | |
463 | ---help--- | |
464 | Enable support for multiple instances of devpts filesystem. | |
465 | If you want to have isolated PTY namespaces (eg: in containers), | |
466 | say Y here. Otherwise, say N. If enabled, each mount of devpts | |
467 | filesystem with the '-o newinstance' option will create an | |
468 | independent PTY namespace. | |
469 | ||
1da177e4 LT |
470 | config LEGACY_PTYS |
471 | bool "Legacy (BSD) PTY support" | |
472 | default y | |
473 | ---help--- | |
474 | A pseudo terminal (PTY) is a software device consisting of two | |
475 | halves: a master and a slave. The slave device behaves identical to | |
476 | a physical terminal; the master device is used by a process to | |
477 | read data from and write data to the slave, thereby emulating a | |
478 | terminal. Typical programs for the master side are telnet servers | |
479 | and xterms. | |
480 | ||
481 | Linux has traditionally used the BSD-like names /dev/ptyxx | |
482 | for masters and /dev/ttyxx for slaves of pseudo | |
483 | terminals. This scheme has a number of problems, including | |
484 | security. This option enables these legacy devices; on most | |
485 | systems, it is safe to say N. | |
486 | ||
487 | ||
488 | config LEGACY_PTY_COUNT | |
489 | int "Maximum number of legacy PTY in use" | |
490 | depends on LEGACY_PTYS | |
345ee839 | 491 | range 0 256 |
1da177e4 LT |
492 | default "256" |
493 | ---help--- | |
494 | The maximum number of legacy PTYs that can be used at any one time. | |
495 | The default is 256, and should be more than enough. Embedded | |
496 | systems may want to reduce this to save memory. | |
497 | ||
498 | When not in use, each legacy PTY occupies 12 bytes on 32-bit | |
499 | architectures and 24 bytes on 64-bit architectures. | |
500 | ||
a45b8395 BH |
501 | config BRIQ_PANEL |
502 | tristate 'Total Impact briQ front panel driver' | |
2818c5de | 503 | depends on PPC_CHRP |
a45b8395 BH |
504 | ---help--- |
505 | The briQ is a small footprint CHRP computer with a frontpanel VFD, a | |
506 | tristate led and two switches. It is the size of a CDROM drive. | |
507 | ||
508 | If you have such one and want anything showing on the VFD then you | |
509 | must answer Y here. | |
510 | ||
511 | To compile this driver as a module, choose M here: the | |
512 | module will be called briq_panel. | |
513 | ||
514 | It's safe to say N here. | |
515 | ||
2dc63a84 MF |
516 | config BFIN_OTP |
517 | tristate "Blackfin On-Chip OTP Memory Support" | |
518 | depends on BLACKFIN && (BF52x || BF54x) | |
519 | default y | |
520 | help | |
521 | If you say Y here, you will get support for a character device | |
522 | interface into the One Time Programmable memory pages that are | |
523 | stored on the Blackfin processor. This will not get you access | |
524 | to the secure memory pages however. You will need to write your | |
525 | own secure code and reader for that. | |
526 | ||
527 | To compile this driver as a module, choose M here: the module | |
528 | will be called bfin-otp. | |
529 | ||
530 | If unsure, it is safe to say Y. | |
531 | ||
532 | config BFIN_OTP_WRITE_ENABLE | |
533 | bool "Enable writing support of OTP pages" | |
534 | depends on BFIN_OTP | |
535 | default n | |
536 | help | |
537 | If you say Y here, you will enable support for writing of the | |
538 | OTP pages. This is dangerous by nature as you can only program | |
539 | the pages once, so only enable this option when you actually | |
540 | need it so as to not inadvertently clobber data. | |
541 | ||
542 | If unsure, say N. | |
543 | ||
1da177e4 LT |
544 | config PRINTER |
545 | tristate "Parallel printer support" | |
546 | depends on PARPORT | |
547 | ---help--- | |
548 | If you intend to attach a printer to the parallel port of your Linux | |
549 | box (as opposed to using a serial printer; if the connector at the | |
550 | printer has 9 or 25 holes ["female"], then it's serial), say Y. | |
551 | Also read the Printing-HOWTO, available from | |
552 | <http://www.tldp.org/docs.html#howto>. | |
553 | ||
554 | It is possible to share one parallel port among several devices | |
555 | (e.g. printer and ZIP drive) and it is safe to compile the | |
556 | corresponding drivers into the kernel. | |
557 | ||
558 | To compile this driver as a module, choose M here and read | |
559 | <file:Documentation/parport.txt>. The module will be called lp. | |
560 | ||
561 | If you have several parallel ports, you can specify which ports to | |
562 | use with the "lp" kernel command line option. (Try "man bootparam" | |
563 | or see the documentation of your boot loader (lilo or loadlin) about | |
564 | how to pass options to the kernel at boot time.) The syntax of the | |
565 | "lp" command line option can be found in <file:drivers/char/lp.c>. | |
566 | ||
567 | If you have more than 8 printers, you need to increase the LP_NO | |
568 | macro in lp.c and the PARPORT_MAX macro in parport.h. | |
569 | ||
570 | config LP_CONSOLE | |
571 | bool "Support for console on line printer" | |
572 | depends on PRINTER | |
573 | ---help--- | |
574 | If you want kernel messages to be printed out as they occur, you | |
575 | can have a console on the printer. This option adds support for | |
576 | doing that; to actually get it to happen you need to pass the | |
577 | option "console=lp0" to the kernel at boot time. | |
578 | ||
579 | If the printer is out of paper (or off, or unplugged, or too | |
580 | busy..) the kernel will stall until the printer is ready again. | |
581 | By defining CONSOLE_LP_STRICT to 0 (at your own risk) you | |
582 | can make the kernel continue when this happens, | |
583 | but it'll lose the kernel messages. | |
584 | ||
585 | If unsure, say N. | |
586 | ||
587 | config PPDEV | |
588 | tristate "Support for user-space parallel port device drivers" | |
589 | depends on PARPORT | |
590 | ---help--- | |
591 | Saying Y to this adds support for /dev/parport device nodes. This | |
592 | is needed for programs that want portable access to the parallel | |
593 | port, for instance deviceid (which displays Plug-and-Play device | |
594 | IDs). | |
595 | ||
596 | This is the parallel port equivalent of SCSI generic support (sg). | |
597 | It is safe to say N to this -- it is not needed for normal printing | |
598 | or parallel port CD-ROM/disk support. | |
599 | ||
600 | To compile this driver as a module, choose M here: the | |
601 | module will be called ppdev. | |
602 | ||
603 | If unsure, say N. | |
604 | ||
45d607ed RA |
605 | config HVC_DRIVER |
606 | bool | |
607 | help | |
3e6c6f63 | 608 | Generic "hypervisor virtual console" infrastructure for various |
2d1df815 | 609 | hypervisors (pSeries, iSeries, Xen, lguest). |
45d607ed RA |
610 | It will automatically be selected if one of the back-end console drivers |
611 | is selected. | |
612 | ||
611e097d CB |
613 | config HVC_IRQ |
614 | bool | |
45d607ed | 615 | |
1da177e4 LT |
616 | config HVC_CONSOLE |
617 | bool "pSeries Hypervisor Virtual Console support" | |
618 | depends on PPC_PSERIES | |
45d607ed | 619 | select HVC_DRIVER |
611e097d | 620 | select HVC_IRQ |
1da177e4 LT |
621 | help |
622 | pSeries machines when partitioned support a hypervisor virtual | |
623 | console. This driver allows each pSeries partition to have a console | |
624 | which is accessed via the HMC. | |
625 | ||
8bff05b0 SR |
626 | config HVC_ISERIES |
627 | bool "iSeries Hypervisor Virtual Console support" | |
b15f792f SR |
628 | depends on PPC_ISERIES |
629 | default y | |
8bff05b0 | 630 | select HVC_DRIVER |
611e097d | 631 | select HVC_IRQ |
d2b4397b | 632 | select VIOPATH |
8bff05b0 SR |
633 | help |
634 | iSeries machines support a hypervisor virtual console. | |
635 | ||
f4d1749e AB |
636 | config HVC_RTAS |
637 | bool "IBM RTAS Console support" | |
638 | depends on PPC_RTAS | |
639 | select HVC_DRIVER | |
640 | help | |
641 | IBM Console device driver which makes use of RTAS | |
642 | ||
3cdc20e5 IK |
643 | config HVC_BEAT |
644 | bool "Toshiba's Beat Hypervisor Console support" | |
645 | depends on PPC_CELLEB | |
646 | select HVC_DRIVER | |
647 | help | |
648 | Toshiba's Cell Reference Set Beat Console device driver | |
649 | ||
44a01d5b HB |
650 | config HVC_IUCV |
651 | bool "z/VM IUCV Hypervisor console support (VM only)" | |
652 | depends on S390 | |
653 | select HVC_DRIVER | |
654 | select IUCV | |
655 | default y | |
656 | help | |
657 | This driver provides a Hypervisor console (HVC) back-end to access | |
658 | a Linux (console) terminal via a z/VM IUCV communication path. | |
659 | ||
b536b4b9 JF |
660 | config HVC_XEN |
661 | bool "Xen Hypervisor Console support" | |
662 | depends on XEN | |
663 | select HVC_DRIVER | |
611e097d | 664 | select HVC_IRQ |
b536b4b9 JF |
665 | default y |
666 | help | |
667 | Xen virtual console device driver | |
668 | ||
d5e54913 DG |
669 | config HVC_UDBG |
670 | bool "udbg based fake hypervisor console" | |
671 | depends on PPC && EXPERIMENTAL | |
672 | select HVC_DRIVER | |
673 | default n | |
674 | ||
31610434 | 675 | config VIRTIO_CONSOLE |
7721c494 CB |
676 | tristate "Virtio console" |
677 | depends on VIRTIO | |
31610434 | 678 | select HVC_DRIVER |
7721c494 CB |
679 | help |
680 | Virtio console for use with lguest and other hypervisors. | |
681 | ||
31610434 | 682 | |
1da177e4 LT |
683 | config HVCS |
684 | tristate "IBM Hypervisor Virtual Console Server support" | |
685 | depends on PPC_PSERIES | |
686 | help | |
687 | Partitionable IBM Power5 ppc64 machines allow hosting of | |
688 | firmware virtual consoles from one Linux partition by | |
689 | another Linux partition. This driver allows console data | |
690 | from Linux partitions to be accessed through TTY device | |
691 | interfaces in the device tree of a Linux partition running | |
692 | this driver. | |
693 | ||
694 | To compile this driver as a module, choose M here: the | |
4737f097 | 695 | module will be called hvcs. Additionally, this module |
1da177e4 LT |
696 | will depend on arch specific APIs exported from hvcserver.ko |
697 | which will also be compiled when this driver is built as a | |
698 | module. | |
699 | ||
fe9e8d53 SR |
700 | config IBM_BSR |
701 | tristate "IBM POWER Barrier Synchronization Register support" | |
702 | depends on PPC_PSERIES | |
703 | help | |
704 | This devices exposes a hardware mechanism for fast synchronization | |
705 | of threads across a large system which avoids bouncing a cacheline | |
706 | between several cores on a system | |
707 | ||
1da177e4 LT |
708 | source "drivers/char/ipmi/Kconfig" |
709 | ||
1da177e4 LT |
710 | config DS1620 |
711 | tristate "NetWinder thermometer support" | |
712 | depends on ARCH_NETWINDER | |
713 | help | |
714 | Say Y here to include support for the thermal management hardware | |
715 | found in the NetWinder. This driver allows the user to control the | |
716 | temperature set points and to read the current temperature. | |
717 | ||
718 | It is also possible to say M here to build it as a module (ds1620) | |
719 | It is recommended to be used on a NetWinder, but it is not a | |
720 | necessity. | |
721 | ||
722 | config NWBUTTON | |
723 | tristate "NetWinder Button" | |
724 | depends on ARCH_NETWINDER | |
725 | ---help--- | |
726 | If you say Y here and create a character device node /dev/nwbutton | |
727 | with major and minor numbers 10 and 158 ("man mknod"), then every | |
728 | time the orange button is pressed a number of times, the number of | |
729 | times the button was pressed will be written to that device. | |
730 | ||
731 | This is most useful for applications, as yet unwritten, which | |
732 | perform actions based on how many times the button is pressed in a | |
733 | row. | |
734 | ||
735 | Do not hold the button down for too long, as the driver does not | |
736 | alter the behaviour of the hardware reset circuitry attached to the | |
737 | button; it will still execute a hard reset if the button is held | |
738 | down for longer than approximately five seconds. | |
739 | ||
740 | To compile this driver as a module, choose M here: the | |
741 | module will be called nwbutton. | |
742 | ||
743 | Most people will answer Y to this question and "Reboot Using Button" | |
744 | below to be able to initiate a system shutdown from the button. | |
745 | ||
746 | config NWBUTTON_REBOOT | |
747 | bool "Reboot Using Button" | |
748 | depends on NWBUTTON | |
749 | help | |
750 | If you say Y here, then you will be able to initiate a system | |
751 | shutdown and reboot by pressing the orange button a number of times. | |
752 | The number of presses to initiate the shutdown is two by default, | |
753 | but this can be altered by modifying the value of NUM_PRESSES_REBOOT | |
754 | in nwbutton.h and recompiling the driver or, if you compile the | |
755 | driver as a module, you can specify the number of presses at load | |
756 | time with "insmod button reboot_count=<something>". | |
757 | ||
758 | config NWFLASH | |
759 | tristate "NetWinder flash support" | |
760 | depends on ARCH_NETWINDER | |
761 | ---help--- | |
762 | If you say Y here and create a character device /dev/flash with | |
763 | major 10 and minor 160 you can manipulate the flash ROM containing | |
764 | the NetWinder firmware. Be careful as accidentally overwriting the | |
765 | flash contents can render your computer unbootable. On no account | |
766 | allow random users access to this device. :-) | |
767 | ||
768 | To compile this driver as a module, choose M here: the | |
769 | module will be called nwflash. | |
770 | ||
771 | If you're not sure, say N. | |
772 | ||
844dd05f MB |
773 | source "drivers/char/hw_random/Kconfig" |
774 | ||
1da177e4 LT |
775 | config NVRAM |
776 | tristate "/dev/nvram support" | |
807a96cd | 777 | depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM |
1da177e4 LT |
778 | ---help--- |
779 | If you say Y here and create a character special file /dev/nvram | |
780 | with major number 10 and minor number 144 using mknod ("man mknod"), | |
781 | you get read and write access to the extra bytes of non-volatile | |
782 | memory in the real time clock (RTC), which is contained in every PC | |
783 | and most Ataris. The actual number of bytes varies, depending on the | |
784 | nvram in the system, but is usually 114 (128-14 for the RTC). | |
785 | ||
786 | This memory is conventionally called "CMOS RAM" on PCs and "NVRAM" | |
787 | on Ataris. /dev/nvram may be used to view settings there, or to | |
788 | change them (with some utility). It could also be used to frequently | |
789 | save a few bits of very important data that may not be lost over | |
790 | power-off and for which writing to disk is too insecure. Note | |
791 | however that most NVRAM space in a PC belongs to the BIOS and you | |
792 | should NEVER idly tamper with it. See Ralf Brown's interrupt list | |
793 | for a guide to the use of CMOS bytes by your BIOS. | |
794 | ||
795 | On Atari machines, /dev/nvram is always configured and does not need | |
796 | to be selected. | |
797 | ||
798 | To compile this driver as a module, choose M here: the | |
799 | module will be called nvram. | |
800 | ||
c7500900 DB |
801 | # |
802 | # These legacy RTC drivers just cause too many conflicts with the generic | |
803 | # RTC framework ... let's not even try to coexist any more. | |
804 | # | |
805 | if RTC_LIB=n | |
806 | ||
1da177e4 | 807 | config RTC |
e6d2bb2b | 808 | tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" |
c7500900 | 809 | depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ |
7bfa58dd | 810 | && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN |
1da177e4 LT |
811 | ---help--- |
812 | If you say Y here and create a character special file /dev/rtc with | |
813 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
814 | will get access to the real time clock (or hardware clock) built | |
815 | into your computer. | |
816 | ||
817 | Every PC has such a clock built in. It can be used to generate | |
818 | signals from as low as 1Hz up to 8192Hz, and can also be used | |
819 | as a 24 hour alarm. It reports status information via the file | |
820 | /proc/driver/rtc and its behaviour is set by various ioctls on | |
821 | /dev/rtc. | |
822 | ||
823 | If you run Linux on a multiprocessor machine and said Y to | |
824 | "Symmetric Multi Processing" above, you should say Y here to read | |
825 | and set the RTC in an SMP compatible fashion. | |
826 | ||
827 | If you think you have a use for such a device (such as periodic data | |
828 | sampling), then say Y here, and read <file:Documentation/rtc.txt> | |
829 | for details. | |
830 | ||
831 | To compile this driver as a module, choose M here: the | |
832 | module will be called rtc. | |
833 | ||
2240598c AV |
834 | config JS_RTC |
835 | tristate "Enhanced Real Time Clock Support" | |
836 | depends on SPARC32 && PCI | |
837 | ---help--- | |
838 | If you say Y here and create a character special file /dev/rtc with | |
839 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
840 | will get access to the real time clock (or hardware clock) built | |
841 | into your computer. | |
842 | ||
843 | Every PC has such a clock built in. It can be used to generate | |
844 | signals from as low as 1Hz up to 8192Hz, and can also be used | |
845 | as a 24 hour alarm. It reports status information via the file | |
846 | /proc/driver/rtc and its behaviour is set by various ioctls on | |
847 | /dev/rtc. | |
848 | ||
849 | If you think you have a use for such a device (such as periodic data | |
850 | sampling), then say Y here, and read <file:Documentation/rtc.txt> | |
851 | for details. | |
852 | ||
853 | To compile this driver as a module, choose M here: the | |
854 | module will be called js-rtc. | |
855 | ||
1da177e4 LT |
856 | config GEN_RTC |
857 | tristate "Generic /dev/rtc emulation" | |
103d6d91 | 858 | depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN |
1da177e4 LT |
859 | ---help--- |
860 | If you say Y here and create a character special file /dev/rtc with | |
861 | major number 10 and minor number 135 using mknod ("man mknod"), you | |
862 | will get access to the real time clock (or hardware clock) built | |
863 | into your computer. | |
864 | ||
865 | It reports status information via the file /proc/driver/rtc and its | |
866 | behaviour is set by various ioctls on /dev/rtc. If you enable the | |
867 | "extended RTC operation" below it will also provide an emulation | |
868 | for RTC_UIE which is required by some programs and may improve | |
869 | precision in some cases. | |
870 | ||
871 | To compile this driver as a module, choose M here: the | |
872 | module will be called genrtc. | |
873 | ||
874 | config GEN_RTC_X | |
875 | bool "Extended RTC operation" | |
876 | depends on GEN_RTC | |
877 | help | |
878 | Provides an emulation for RTC_UIE which is required by some programs | |
879 | and may improve precision of the generic RTC support in some cases. | |
880 | ||
881 | config EFI_RTC | |
882 | bool "EFI Real Time Clock Services" | |
883 | depends on IA64 | |
884 | ||
885 | config DS1302 | |
886 | tristate "DS1302 RTC support" | |
887 | depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT) | |
888 | help | |
889 | If you say Y here and create a character special file /dev/rtc with | |
890 | major number 121 and minor number 0 using mknod ("man mknod"), you | |
891 | will get access to the real time clock (or hardware clock) built | |
892 | into your computer. | |
893 | ||
c7500900 DB |
894 | endif # RTC_LIB |
895 | ||
1da177e4 LT |
896 | config DTLK |
897 | tristate "Double Talk PC internal speech card support" | |
eeca7a36 | 898 | depends on ISA |
1da177e4 LT |
899 | help |
900 | This driver is for the DoubleTalk PC, a speech synthesizer | |
901 | manufactured by RC Systems (<http://www.rcsys.com/>). It is also | |
902 | called the `internal DoubleTalk'. | |
903 | ||
904 | To compile this driver as a module, choose M here: the | |
905 | module will be called dtlk. | |
906 | ||
ef141a0b SN |
907 | config XILINX_HWICAP |
908 | tristate "Xilinx HWICAP Support" | |
6fa612b5 | 909 | depends on XILINX_VIRTEX || MICROBLAZE |
ef141a0b SN |
910 | help |
911 | This option enables support for Xilinx Internal Configuration | |
912 | Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex | |
913 | FPGA platforms to partially reconfigure the FPGA at runtime. | |
914 | ||
915 | If unsure, say N. | |
916 | ||
1da177e4 LT |
917 | config R3964 |
918 | tristate "Siemens R3964 line discipline" | |
919 | ---help--- | |
920 | This driver allows synchronous communication with devices using the | |
921 | Siemens R3964 packet protocol. Unless you are dealing with special | |
922 | hardware like PLCs, you are unlikely to need this. | |
923 | ||
924 | To compile this driver as a module, choose M here: the | |
925 | module will be called n_r3964. | |
926 | ||
927 | If unsure, say N. | |
928 | ||
929 | config APPLICOM | |
930 | tristate "Applicom intelligent fieldbus card support" | |
931 | depends on PCI | |
932 | ---help--- | |
933 | This driver provides the kernel-side support for the intelligent | |
934 | fieldbus cards made by Applicom International. More information | |
935 | about these cards can be found on the WWW at the address | |
936 | <http://www.applicom-int.com/>, or by email from David Woodhouse | |
937 | <dwmw2@infradead.org>. | |
938 | ||
939 | To compile this driver as a module, choose M here: the | |
940 | module will be called applicom. | |
941 | ||
942 | If unsure, say N. | |
943 | ||
944 | config SONYPI | |
945 | tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)" | |
946 | depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT | |
947 | ---help--- | |
948 | This driver enables access to the Sony Programmable I/O Control | |
949 | Device which can be found in many (all ?) Sony Vaio laptops. | |
950 | ||
951 | If you have one of those laptops, read | |
018a651a | 952 | <file:Documentation/laptops/sonypi.txt>, and say Y or M here. |
1da177e4 LT |
953 | |
954 | To compile this driver as a module, choose M here: the | |
955 | module will be called sonypi. | |
956 | ||
09762516 YY |
957 | config GPIO_TB0219 |
958 | tristate "TANBAC TB0219 GPIO support" | |
bef1f402 | 959 | depends on TANBAC_TB022X |
584e1236 | 960 | select GPIO_VR41XX |
1da177e4 | 961 | |
1da177e4 LT |
962 | source "drivers/char/pcmcia/Kconfig" |
963 | ||
964 | config MWAVE | |
965 | tristate "ACP Modem (Mwave) support" | |
966 | depends on X86 | |
967 | select SERIAL_8250 | |
968 | ---help--- | |
969 | The ACP modem (Mwave) for Linux is a WinModem. It is composed of a | |
970 | kernel driver and a user level application. Together these components | |
971 | support direct attachment to public switched telephone networks (PSTNs) | |
972 | and support selected world wide countries. | |
973 | ||
974 | This version of the ACP Modem driver supports the IBM Thinkpad 600E, | |
975 | 600, and 770 that include on board ACP modem hardware. | |
976 | ||
977 | The modem also supports the standard communications port interface | |
978 | (ttySx) and is compatible with the Hayes AT Command Set. | |
979 | ||
980 | The user level application needed to use this driver can be found at | |
981 | the IBM Linux Technology Center (LTC) web site: | |
982 | <http://www.ibm.com/linux/ltc/>. | |
983 | ||
984 | If you own one of the above IBM Thinkpads which has the Mwave chipset | |
985 | in it, say Y. | |
986 | ||
987 | To compile this driver as a module, choose M here: the | |
988 | module will be called mwave. | |
989 | ||
990 | config SCx200_GPIO | |
991 | tristate "NatSemi SCx200 GPIO Support" | |
992 | depends on SCx200 | |
7a8e2a5e | 993 | select NSC_GPIO |
1da177e4 LT |
994 | help |
995 | Give userspace access to the GPIO pins on the National | |
996 | Semiconductor SCx200 processors. | |
997 | ||
998 | If compiled as a module, it will be called scx200_gpio. | |
999 | ||
7a8e2a5e JC |
1000 | config PC8736x_GPIO |
1001 | tristate "NatSemi PC8736x GPIO Support" | |
1002 | depends on X86 | |
1003 | default SCx200_GPIO # mostly N | |
1004 | select NSC_GPIO # needed for support routines | |
1005 | help | |
1006 | Give userspace access to the GPIO pins on the National | |
1007 | Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip | |
1008 | has multiple functional units, inc several managed by | |
1009 | hwmon/pc87360 driver. Tested with PC-87366 | |
1010 | ||
1011 | If compiled as a module, it will be called pc8736x_gpio. | |
1012 | ||
1013 | config NSC_GPIO | |
1014 | tristate "NatSemi Base GPIO Support" | |
699352c3 | 1015 | depends on X86_32 |
7a8e2a5e JC |
1016 | # selected by SCx200_GPIO and PC8736x_GPIO |
1017 | # what about 2 selectors differing: m != y | |
1018 | help | |
1019 | Common support used (and needed) by scx200_gpio and | |
1020 | pc8736x_gpio drivers. If those drivers are built as | |
1021 | modules, this one will be too, named nsc_gpio | |
1022 | ||
e329113c BG |
1023 | config CS5535_GPIO |
1024 | tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)" | |
1025 | depends on X86_32 | |
1026 | help | |
1027 | Give userspace access to the GPIO pins on the AMD CS5535 and | |
1028 | CS5536 Geode companion devices. | |
1029 | ||
1030 | If compiled as a module, it will be called cs5535_gpio. | |
1031 | ||
1da177e4 | 1032 | config RAW_DRIVER |
abd4aa5a | 1033 | tristate "RAW driver (/dev/raw/rawN)" |
9361401e | 1034 | depends on BLOCK |
1da177e4 | 1035 | help |
abd4aa5a DJ |
1036 | The raw driver permits block devices to be bound to /dev/raw/rawN. |
1037 | Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. | |
1da177e4 LT |
1038 | See the raw(8) manpage for more details. |
1039 | ||
abd4aa5a | 1040 | Applications should preferably open the device (eg /dev/hda1) |
1da177e4 LT |
1041 | with the O_DIRECT flag. |
1042 | ||
0de502aa AM |
1043 | config MAX_RAW_DEVS |
1044 | int "Maximum number of RAW devices to support (1-8192)" | |
1045 | depends on RAW_DRIVER | |
1046 | default "256" | |
1047 | help | |
1048 | The maximum number of RAW devices that are supported. | |
1049 | Default is 256. Increase this number in case you need lots of | |
1050 | raw devices. | |
1051 | ||
1da177e4 LT |
1052 | config HPET |
1053 | bool "HPET - High Precision Event Timer" if (X86 || IA64) | |
1054 | default n | |
1055 | depends on ACPI | |
1056 | help | |
1057 | If you say Y here, you will have a miscdevice named "/dev/hpet/". Each | |
1058 | open selects one of the timers supported by the HPET. The timers are | |
3cb2fccc | 1059 | non-periodic and/or periodic. |
1da177e4 | 1060 | |
1da177e4 LT |
1061 | config HPET_MMAP |
1062 | bool "Allow mmap of HPET" | |
1063 | default y | |
1064 | depends on HPET | |
1065 | help | |
1066 | If you say Y here, user applications will be able to mmap | |
1067 | the HPET registers. | |
1068 | ||
1069 | In some hardware implementations, the page containing HPET | |
1070 | registers may also contain other things that shouldn't be | |
1071 | exposed to the user. If this applies to your hardware, | |
1072 | say N here. | |
1073 | ||
1da177e4 LT |
1074 | config HANGCHECK_TIMER |
1075 | tristate "Hangcheck timer" | |
abf3ea1b | 1076 | depends on X86 || IA64 || PPC64 || S390 |
1da177e4 LT |
1077 | help |
1078 | The hangcheck-timer module detects when the system has gone | |
1079 | out to lunch past a certain margin. It can reboot the system | |
1080 | or merely print a warning. | |
1081 | ||
1082 | config MMTIMER | |
1083 | tristate "MMTIMER Memory mapped RTC for SGI Altix" | |
1084 | depends on IA64_GENERIC || IA64_SGI_SN2 | |
1085 | default y | |
1086 | help | |
1087 | The mmtimer device allows direct userspace access to the | |
1088 | Altix system timer. | |
1089 | ||
1090 | source "drivers/char/tpm/Kconfig" | |
1091 | ||
1a80ba88 | 1092 | config TELCLOCK |
03154a27 | 1093 | tristate "Telecom clock driver for ATCA SBC" |
4d99bfac | 1094 | depends on EXPERIMENTAL && X86 |
1a80ba88 MG |
1095 | default n |
1096 | help | |
03154a27 MG |
1097 | The telecom clock device is specific to the MPCBL0010 and MPCBL0050 |
1098 | ATCA computers and allows direct userspace access to the | |
1099 | configuration of the telecom clock configuration settings. This | |
1100 | device is used for hardware synchronization across the ATCA backplane | |
1101 | fabric. Upon loading, the driver exports a sysfs directory, | |
1102 | /sys/devices/platform/telco_clock, with a number of files for | |
1103 | controlling the behavior of this hardware. | |
1a80ba88 | 1104 | |
4f911d64 RK |
1105 | config DEVPORT |
1106 | bool | |
1107 | depends on !M68K | |
1108 | depends on ISA || PCI | |
1109 | default y | |
1110 | ||
61d48c2c MS |
1111 | source "drivers/s390/char/Kconfig" |
1112 | ||
1da177e4 LT |
1113 | endmenu |
1114 |