Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * | |
3 | * Driver for Bluetooth PCMCIA cards with HCI UART interface | |
4 | * | |
5 | * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> | |
6 | * | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation; | |
11 | * | |
12 | * Software distributed under the License is distributed on an "AS | |
13 | * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | * implied. See the License for the specific language governing | |
15 | * rights and limitations under the License. | |
16 | * | |
17 | * The initial developer of the original code is David A. Hinds | |
18 | * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | * | |
21 | */ | |
22 | ||
1da177e4 LT |
23 | #include <linux/module.h> |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/init.h> | |
27 | #include <linux/slab.h> | |
28 | #include <linux/types.h> | |
1da177e4 LT |
29 | #include <linux/delay.h> |
30 | #include <linux/errno.h> | |
31 | #include <linux/ptrace.h> | |
32 | #include <linux/ioport.h> | |
33 | #include <linux/spinlock.h> | |
34 | #include <linux/moduleparam.h> | |
35 | ||
36 | #include <linux/skbuff.h> | |
37 | #include <linux/string.h> | |
38 | #include <linux/serial.h> | |
39 | #include <linux/serial_reg.h> | |
40 | #include <linux/bitops.h> | |
41 | #include <asm/system.h> | |
42 | #include <asm/io.h> | |
43 | ||
1da177e4 LT |
44 | #include <pcmcia/cs_types.h> |
45 | #include <pcmcia/cs.h> | |
46 | #include <pcmcia/cistpl.h> | |
47 | #include <pcmcia/ciscode.h> | |
48 | #include <pcmcia/ds.h> | |
49 | #include <pcmcia/cisreg.h> | |
50 | ||
51 | #include <net/bluetooth/bluetooth.h> | |
52 | #include <net/bluetooth/hci_core.h> | |
53 | ||
54 | ||
55 | ||
56 | /* ======================== Module parameters ======================== */ | |
57 | ||
58 | ||
59 | MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); | |
60 | MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface"); | |
61 | MODULE_LICENSE("GPL"); | |
62 | ||
63 | ||
64 | ||
65 | /* ======================== Local structures ======================== */ | |
66 | ||
67 | ||
68 | typedef struct btuart_info_t { | |
fd238232 | 69 | struct pcmcia_device *p_dev; |
1da177e4 LT |
70 | dev_node_t node; |
71 | ||
72 | struct hci_dev *hdev; | |
73 | ||
74 | spinlock_t lock; /* For serializing operations */ | |
75 | ||
76 | struct sk_buff_head txq; | |
77 | unsigned long tx_state; | |
78 | ||
79 | unsigned long rx_state; | |
80 | unsigned long rx_count; | |
81 | struct sk_buff *rx_skb; | |
82 | } btuart_info_t; | |
83 | ||
84 | ||
15b99ac1 | 85 | static int btuart_config(struct pcmcia_device *link); |
fba395ee | 86 | static void btuart_release(struct pcmcia_device *link); |
1da177e4 | 87 | |
cc3b4866 | 88 | static void btuart_detach(struct pcmcia_device *p_dev); |
1da177e4 | 89 | |
1da177e4 LT |
90 | |
91 | /* Maximum baud rate */ | |
92 | #define SPEED_MAX 115200 | |
93 | ||
94 | /* Default baud rate: 57600, 115200, 230400 or 460800 */ | |
95 | #define DEFAULT_BAUD_RATE 115200 | |
96 | ||
97 | ||
98 | /* Transmit states */ | |
99 | #define XMIT_SENDING 1 | |
100 | #define XMIT_WAKEUP 2 | |
101 | #define XMIT_WAITING 8 | |
102 | ||
103 | /* Receiver states */ | |
104 | #define RECV_WAIT_PACKET_TYPE 0 | |
105 | #define RECV_WAIT_EVENT_HEADER 1 | |
106 | #define RECV_WAIT_ACL_HEADER 2 | |
107 | #define RECV_WAIT_SCO_HEADER 3 | |
108 | #define RECV_WAIT_DATA 4 | |
109 | ||
110 | ||
111 | ||
112 | /* ======================== Interrupt handling ======================== */ | |
113 | ||
114 | ||
115 | static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) | |
116 | { | |
117 | int actual = 0; | |
118 | ||
119 | /* Tx FIFO should be empty */ | |
120 | if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) | |
121 | return 0; | |
122 | ||
123 | /* Fill FIFO with current frame */ | |
124 | while ((fifo_size-- > 0) && (actual < len)) { | |
125 | /* Transmit next byte */ | |
126 | outb(buf[actual], iobase + UART_TX); | |
127 | actual++; | |
128 | } | |
129 | ||
130 | return actual; | |
131 | } | |
132 | ||
133 | ||
134 | static void btuart_write_wakeup(btuart_info_t *info) | |
135 | { | |
136 | if (!info) { | |
137 | BT_ERR("Unknown device"); | |
138 | return; | |
139 | } | |
140 | ||
141 | if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { | |
142 | set_bit(XMIT_WAKEUP, &(info->tx_state)); | |
143 | return; | |
144 | } | |
145 | ||
146 | do { | |
fd238232 | 147 | register unsigned int iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
148 | register struct sk_buff *skb; |
149 | register int len; | |
150 | ||
151 | clear_bit(XMIT_WAKEUP, &(info->tx_state)); | |
152 | ||
e2d40963 | 153 | if (!pcmcia_dev_present(info->p_dev)) |
1da177e4 LT |
154 | return; |
155 | ||
156 | if (!(skb = skb_dequeue(&(info->txq)))) | |
157 | break; | |
158 | ||
159 | /* Send frame */ | |
160 | len = btuart_write(iobase, 16, skb->data, skb->len); | |
161 | set_bit(XMIT_WAKEUP, &(info->tx_state)); | |
162 | ||
163 | if (len == skb->len) { | |
164 | kfree_skb(skb); | |
165 | } else { | |
166 | skb_pull(skb, len); | |
167 | skb_queue_head(&(info->txq), skb); | |
168 | } | |
169 | ||
170 | info->hdev->stat.byte_tx += len; | |
171 | ||
172 | } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); | |
173 | ||
174 | clear_bit(XMIT_SENDING, &(info->tx_state)); | |
175 | } | |
176 | ||
177 | ||
178 | static void btuart_receive(btuart_info_t *info) | |
179 | { | |
180 | unsigned int iobase; | |
181 | int boguscount = 0; | |
182 | ||
183 | if (!info) { | |
184 | BT_ERR("Unknown device"); | |
185 | return; | |
186 | } | |
187 | ||
fd238232 | 188 | iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
189 | |
190 | do { | |
191 | info->hdev->stat.byte_rx++; | |
192 | ||
193 | /* Allocate packet */ | |
194 | if (info->rx_skb == NULL) { | |
195 | info->rx_state = RECV_WAIT_PACKET_TYPE; | |
196 | info->rx_count = 0; | |
197 | if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) { | |
198 | BT_ERR("Can't allocate mem for new packet"); | |
199 | return; | |
200 | } | |
201 | } | |
202 | ||
203 | if (info->rx_state == RECV_WAIT_PACKET_TYPE) { | |
204 | ||
205 | info->rx_skb->dev = (void *) info->hdev; | |
0d48d939 | 206 | bt_cb(info->rx_skb)->pkt_type = inb(iobase + UART_RX); |
1da177e4 | 207 | |
0d48d939 | 208 | switch (bt_cb(info->rx_skb)->pkt_type) { |
1da177e4 LT |
209 | |
210 | case HCI_EVENT_PKT: | |
211 | info->rx_state = RECV_WAIT_EVENT_HEADER; | |
212 | info->rx_count = HCI_EVENT_HDR_SIZE; | |
213 | break; | |
214 | ||
215 | case HCI_ACLDATA_PKT: | |
216 | info->rx_state = RECV_WAIT_ACL_HEADER; | |
217 | info->rx_count = HCI_ACL_HDR_SIZE; | |
218 | break; | |
219 | ||
220 | case HCI_SCODATA_PKT: | |
221 | info->rx_state = RECV_WAIT_SCO_HEADER; | |
222 | info->rx_count = HCI_SCO_HDR_SIZE; | |
223 | break; | |
224 | ||
225 | default: | |
226 | /* Unknown packet */ | |
0d48d939 | 227 | BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type); |
1da177e4 LT |
228 | info->hdev->stat.err_rx++; |
229 | clear_bit(HCI_RUNNING, &(info->hdev->flags)); | |
230 | ||
231 | kfree_skb(info->rx_skb); | |
232 | info->rx_skb = NULL; | |
233 | break; | |
234 | ||
235 | } | |
236 | ||
237 | } else { | |
238 | ||
239 | *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX); | |
240 | info->rx_count--; | |
241 | ||
242 | if (info->rx_count == 0) { | |
243 | ||
244 | int dlen; | |
245 | struct hci_event_hdr *eh; | |
246 | struct hci_acl_hdr *ah; | |
247 | struct hci_sco_hdr *sh; | |
248 | ||
249 | ||
250 | switch (info->rx_state) { | |
251 | ||
252 | case RECV_WAIT_EVENT_HEADER: | |
2a123b86 | 253 | eh = hci_event_hdr(info->rx_skb); |
1da177e4 LT |
254 | info->rx_state = RECV_WAIT_DATA; |
255 | info->rx_count = eh->plen; | |
256 | break; | |
257 | ||
258 | case RECV_WAIT_ACL_HEADER: | |
2a123b86 | 259 | ah = hci_acl_hdr(info->rx_skb); |
1da177e4 LT |
260 | dlen = __le16_to_cpu(ah->dlen); |
261 | info->rx_state = RECV_WAIT_DATA; | |
262 | info->rx_count = dlen; | |
263 | break; | |
264 | ||
265 | case RECV_WAIT_SCO_HEADER: | |
2a123b86 | 266 | sh = hci_sco_hdr(info->rx_skb); |
1da177e4 LT |
267 | info->rx_state = RECV_WAIT_DATA; |
268 | info->rx_count = sh->dlen; | |
269 | break; | |
270 | ||
271 | case RECV_WAIT_DATA: | |
272 | hci_recv_frame(info->rx_skb); | |
273 | info->rx_skb = NULL; | |
274 | break; | |
275 | ||
276 | } | |
277 | ||
278 | } | |
279 | ||
280 | } | |
281 | ||
282 | /* Make sure we don't stay here too long */ | |
283 | if (boguscount++ > 16) | |
284 | break; | |
285 | ||
286 | } while (inb(iobase + UART_LSR) & UART_LSR_DR); | |
287 | } | |
288 | ||
289 | ||
7d12e780 | 290 | static irqreturn_t btuart_interrupt(int irq, void *dev_inst) |
1da177e4 LT |
291 | { |
292 | btuart_info_t *info = dev_inst; | |
293 | unsigned int iobase; | |
294 | int boguscount = 0; | |
295 | int iir, lsr; | |
296 | ||
ac019360 | 297 | BUG_ON(!info->hdev); |
1da177e4 | 298 | |
fd238232 | 299 | iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
300 | |
301 | spin_lock(&(info->lock)); | |
302 | ||
303 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; | |
304 | while (iir) { | |
305 | ||
306 | /* Clear interrupt */ | |
307 | lsr = inb(iobase + UART_LSR); | |
308 | ||
309 | switch (iir) { | |
310 | case UART_IIR_RLSI: | |
311 | BT_ERR("RLSI"); | |
312 | break; | |
313 | case UART_IIR_RDI: | |
314 | /* Receive interrupt */ | |
315 | btuart_receive(info); | |
316 | break; | |
317 | case UART_IIR_THRI: | |
318 | if (lsr & UART_LSR_THRE) { | |
319 | /* Transmitter ready for data */ | |
320 | btuart_write_wakeup(info); | |
321 | } | |
322 | break; | |
323 | default: | |
324 | BT_ERR("Unhandled IIR=%#x", iir); | |
325 | break; | |
326 | } | |
327 | ||
328 | /* Make sure we don't stay here too long */ | |
329 | if (boguscount++ > 100) | |
330 | break; | |
331 | ||
332 | iir = inb(iobase + UART_IIR) & UART_IIR_ID; | |
333 | ||
334 | } | |
335 | ||
336 | spin_unlock(&(info->lock)); | |
337 | ||
338 | return IRQ_HANDLED; | |
339 | } | |
340 | ||
341 | ||
342 | static void btuart_change_speed(btuart_info_t *info, unsigned int speed) | |
343 | { | |
344 | unsigned long flags; | |
345 | unsigned int iobase; | |
346 | int fcr; /* FIFO control reg */ | |
347 | int lcr; /* Line control reg */ | |
348 | int divisor; | |
349 | ||
350 | if (!info) { | |
351 | BT_ERR("Unknown device"); | |
352 | return; | |
353 | } | |
354 | ||
fd238232 | 355 | iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
356 | |
357 | spin_lock_irqsave(&(info->lock), flags); | |
358 | ||
359 | /* Turn off interrupts */ | |
360 | outb(0, iobase + UART_IER); | |
361 | ||
362 | divisor = SPEED_MAX / speed; | |
363 | ||
364 | fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; | |
365 | ||
366 | /* | |
367 | * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and | |
368 | * almost 1,7 ms at 19200 bps. At speeds above that we can just forget | |
369 | * about this timeout since it will always be fast enough. | |
370 | */ | |
371 | ||
372 | if (speed < 38400) | |
373 | fcr |= UART_FCR_TRIGGER_1; | |
374 | else | |
375 | fcr |= UART_FCR_TRIGGER_14; | |
376 | ||
377 | /* Bluetooth cards use 8N1 */ | |
378 | lcr = UART_LCR_WLEN8; | |
379 | ||
380 | outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ | |
381 | outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ | |
382 | outb(divisor >> 8, iobase + UART_DLM); | |
383 | outb(lcr, iobase + UART_LCR); /* Set 8N1 */ | |
384 | outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ | |
385 | ||
b92b1c57 | 386 | /* Turn on interrupts */ |
1da177e4 LT |
387 | outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); |
388 | ||
389 | spin_unlock_irqrestore(&(info->lock), flags); | |
390 | } | |
391 | ||
392 | ||
393 | ||
394 | /* ======================== HCI interface ======================== */ | |
395 | ||
396 | ||
397 | static int btuart_hci_flush(struct hci_dev *hdev) | |
398 | { | |
399 | btuart_info_t *info = (btuart_info_t *)(hdev->driver_data); | |
400 | ||
401 | /* Drop TX queue */ | |
402 | skb_queue_purge(&(info->txq)); | |
403 | ||
404 | return 0; | |
405 | } | |
406 | ||
407 | ||
408 | static int btuart_hci_open(struct hci_dev *hdev) | |
409 | { | |
410 | set_bit(HCI_RUNNING, &(hdev->flags)); | |
411 | ||
412 | return 0; | |
413 | } | |
414 | ||
415 | ||
416 | static int btuart_hci_close(struct hci_dev *hdev) | |
417 | { | |
418 | if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) | |
419 | return 0; | |
420 | ||
421 | btuart_hci_flush(hdev); | |
422 | ||
423 | return 0; | |
424 | } | |
425 | ||
426 | ||
427 | static int btuart_hci_send_frame(struct sk_buff *skb) | |
428 | { | |
429 | btuart_info_t *info; | |
430 | struct hci_dev *hdev = (struct hci_dev *)(skb->dev); | |
431 | ||
432 | if (!hdev) { | |
433 | BT_ERR("Frame for unknown HCI device (hdev=NULL)"); | |
434 | return -ENODEV; | |
435 | } | |
436 | ||
437 | info = (btuart_info_t *)(hdev->driver_data); | |
438 | ||
0d48d939 | 439 | switch (bt_cb(skb)->pkt_type) { |
1da177e4 LT |
440 | case HCI_COMMAND_PKT: |
441 | hdev->stat.cmd_tx++; | |
442 | break; | |
443 | case HCI_ACLDATA_PKT: | |
444 | hdev->stat.acl_tx++; | |
445 | break; | |
446 | case HCI_SCODATA_PKT: | |
447 | hdev->stat.sco_tx++; | |
448 | break; | |
449 | }; | |
450 | ||
451 | /* Prepend skb with frame type */ | |
0d48d939 | 452 | memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); |
1da177e4 LT |
453 | skb_queue_tail(&(info->txq), skb); |
454 | ||
455 | btuart_write_wakeup(info); | |
456 | ||
457 | return 0; | |
458 | } | |
459 | ||
460 | ||
461 | static void btuart_hci_destruct(struct hci_dev *hdev) | |
462 | { | |
463 | } | |
464 | ||
465 | ||
466 | static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) | |
467 | { | |
468 | return -ENOIOCTLCMD; | |
469 | } | |
470 | ||
471 | ||
472 | ||
473 | /* ======================== Card services HCI interaction ======================== */ | |
474 | ||
475 | ||
476 | static int btuart_open(btuart_info_t *info) | |
477 | { | |
478 | unsigned long flags; | |
fd238232 | 479 | unsigned int iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
480 | struct hci_dev *hdev; |
481 | ||
482 | spin_lock_init(&(info->lock)); | |
483 | ||
484 | skb_queue_head_init(&(info->txq)); | |
485 | ||
486 | info->rx_state = RECV_WAIT_PACKET_TYPE; | |
487 | info->rx_count = 0; | |
488 | info->rx_skb = NULL; | |
489 | ||
490 | /* Initialize HCI device */ | |
491 | hdev = hci_alloc_dev(); | |
492 | if (!hdev) { | |
493 | BT_ERR("Can't allocate HCI device"); | |
494 | return -ENOMEM; | |
495 | } | |
496 | ||
497 | info->hdev = hdev; | |
498 | ||
499 | hdev->type = HCI_PCCARD; | |
500 | hdev->driver_data = info; | |
27d35284 | 501 | SET_HCIDEV_DEV(hdev, &info->p_dev->dev); |
1da177e4 LT |
502 | |
503 | hdev->open = btuart_hci_open; | |
504 | hdev->close = btuart_hci_close; | |
505 | hdev->flush = btuart_hci_flush; | |
506 | hdev->send = btuart_hci_send_frame; | |
507 | hdev->destruct = btuart_hci_destruct; | |
508 | hdev->ioctl = btuart_hci_ioctl; | |
509 | ||
510 | hdev->owner = THIS_MODULE; | |
511 | ||
512 | spin_lock_irqsave(&(info->lock), flags); | |
513 | ||
514 | /* Reset UART */ | |
515 | outb(0, iobase + UART_MCR); | |
516 | ||
517 | /* Turn off interrupts */ | |
518 | outb(0, iobase + UART_IER); | |
519 | ||
520 | /* Initialize UART */ | |
521 | outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ | |
522 | outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); | |
523 | ||
524 | /* Turn on interrupts */ | |
525 | // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); | |
526 | ||
527 | spin_unlock_irqrestore(&(info->lock), flags); | |
528 | ||
529 | btuart_change_speed(info, DEFAULT_BAUD_RATE); | |
530 | ||
531 | /* Timeout before it is safe to send the first HCI packet */ | |
532 | msleep(1000); | |
533 | ||
534 | /* Register HCI device */ | |
535 | if (hci_register_dev(hdev) < 0) { | |
536 | BT_ERR("Can't register HCI device"); | |
537 | info->hdev = NULL; | |
538 | hci_free_dev(hdev); | |
539 | return -ENODEV; | |
540 | } | |
541 | ||
542 | return 0; | |
543 | } | |
544 | ||
545 | ||
546 | static int btuart_close(btuart_info_t *info) | |
547 | { | |
548 | unsigned long flags; | |
fd238232 | 549 | unsigned int iobase = info->p_dev->io.BasePort1; |
1da177e4 LT |
550 | struct hci_dev *hdev = info->hdev; |
551 | ||
552 | if (!hdev) | |
553 | return -ENODEV; | |
554 | ||
555 | btuart_hci_close(hdev); | |
556 | ||
557 | spin_lock_irqsave(&(info->lock), flags); | |
558 | ||
559 | /* Reset UART */ | |
560 | outb(0, iobase + UART_MCR); | |
561 | ||
562 | /* Turn off interrupts */ | |
563 | outb(0, iobase + UART_IER); | |
564 | ||
565 | spin_unlock_irqrestore(&(info->lock), flags); | |
566 | ||
567 | if (hci_unregister_dev(hdev) < 0) | |
568 | BT_ERR("Can't unregister HCI device %s", hdev->name); | |
569 | ||
570 | hci_free_dev(hdev); | |
571 | ||
572 | return 0; | |
573 | } | |
574 | ||
15b99ac1 | 575 | static int btuart_probe(struct pcmcia_device *link) |
1da177e4 LT |
576 | { |
577 | btuart_info_t *info; | |
1da177e4 LT |
578 | |
579 | /* Create new info device */ | |
089b1dbb | 580 | info = kzalloc(sizeof(*info), GFP_KERNEL); |
1da177e4 | 581 | if (!info) |
f8cfa618 | 582 | return -ENOMEM; |
1da177e4 | 583 | |
fba395ee | 584 | info->p_dev = link; |
1da177e4 LT |
585 | link->priv = info; |
586 | ||
587 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
588 | link->io.NumPorts1 = 8; | |
589 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; | |
590 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
591 | ||
592 | link->irq.Handler = btuart_interrupt; | |
593 | link->irq.Instance = info; | |
594 | ||
595 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
1da177e4 LT |
596 | link->conf.IntType = INT_MEMORY_AND_IO; |
597 | ||
15b99ac1 | 598 | return btuart_config(link); |
1da177e4 LT |
599 | } |
600 | ||
601 | ||
fba395ee | 602 | static void btuart_detach(struct pcmcia_device *link) |
1da177e4 LT |
603 | { |
604 | btuart_info_t *info = link->priv; | |
1da177e4 | 605 | |
e2d40963 | 606 | btuart_release(link); |
1da177e4 LT |
607 | kfree(info); |
608 | } | |
609 | ||
ed58872a DB |
610 | static int btuart_check_config(struct pcmcia_device *p_dev, |
611 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 612 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 613 | unsigned int vcc, |
ed58872a | 614 | void *priv_data) |
1da177e4 | 615 | { |
ad913c11 | 616 | int *try = priv_data; |
ed58872a DB |
617 | |
618 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
619 | p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; | |
620 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && | |
621 | (cf->io.win[0].base != 0)) { | |
ed58872a | 622 | p_dev->io.BasePort1 = cf->io.win[0].base; |
ad913c11 | 623 | p_dev->io.IOAddrLines = (*try == 0) ? 16 : |
ed58872a DB |
624 | cf->io.flags & CISTPL_IO_LINES_MASK; |
625 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
626 | return 0; | |
627 | } | |
628 | return -ENODEV; | |
1da177e4 LT |
629 | } |
630 | ||
ed58872a DB |
631 | static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, |
632 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 633 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 634 | unsigned int vcc, |
ed58872a | 635 | void *priv_data) |
1da177e4 | 636 | { |
ed58872a DB |
637 | static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
638 | int j; | |
639 | ||
640 | if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
ed58872a DB |
641 | for (j = 0; j < 5; j++) { |
642 | p_dev->io.BasePort1 = base[j]; | |
643 | p_dev->io.IOAddrLines = base[j] ? 16 : 3; | |
644 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
645 | return 0; | |
646 | } | |
647 | } | |
648 | return -ENODEV; | |
1da177e4 LT |
649 | } |
650 | ||
15b99ac1 | 651 | static int btuart_config(struct pcmcia_device *link) |
1da177e4 | 652 | { |
1da177e4 | 653 | btuart_info_t *info = link->priv; |
ed58872a | 654 | int i; |
ad913c11 | 655 | int try; |
ed58872a DB |
656 | |
657 | /* First pass: look for a config entry that looks normal. | |
658 | Two tries: without IO aliases, then with aliases */ | |
659 | for (try = 0; try < 2; try++) | |
ad913c11 | 660 | if (!pcmcia_loop_config(link, btuart_check_config, &try)) |
ed58872a | 661 | goto found_port; |
1da177e4 LT |
662 | |
663 | /* Second pass: try to find an entry that isn't picky about | |
664 | its base address, then try to grab any standard serial port | |
665 | address, and finally try to get any free port. */ | |
ed58872a DB |
666 | if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL)) |
667 | goto found_port; | |
1da177e4 | 668 | |
ed58872a DB |
669 | BT_ERR("No usable port range found"); |
670 | cs_error(link, RequestIO, -ENODEV); | |
671 | goto failed; | |
1da177e4 | 672 | |
ed58872a | 673 | found_port: |
fba395ee | 674 | i = pcmcia_request_irq(link, &link->irq); |
4c89e88b | 675 | if (i != 0) { |
fba395ee | 676 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
677 | link->irq.AssignedIRQ = 0; |
678 | } | |
679 | ||
fba395ee | 680 | i = pcmcia_request_configuration(link, &link->conf); |
4c89e88b | 681 | if (i != 0) { |
fba395ee | 682 | cs_error(link, RequestConfiguration, i); |
1da177e4 LT |
683 | goto failed; |
684 | } | |
685 | ||
686 | if (btuart_open(info) != 0) | |
687 | goto failed; | |
688 | ||
689 | strcpy(info->node.dev_name, info->hdev->name); | |
fd238232 | 690 | link->dev_node = &info->node; |
1da177e4 | 691 | |
15b99ac1 | 692 | return 0; |
1da177e4 | 693 | |
1da177e4 LT |
694 | failed: |
695 | btuart_release(link); | |
15b99ac1 | 696 | return -ENODEV; |
1da177e4 LT |
697 | } |
698 | ||
699 | ||
fba395ee | 700 | static void btuart_release(struct pcmcia_device *link) |
1da177e4 LT |
701 | { |
702 | btuart_info_t *info = link->priv; | |
703 | ||
e2d40963 | 704 | btuart_close(info); |
1da177e4 | 705 | |
fba395ee | 706 | pcmcia_disable_device(link); |
1da177e4 LT |
707 | } |
708 | ||
279c9361 DB |
709 | static struct pcmcia_device_id btuart_ids[] = { |
710 | /* don't use this driver. Use serial_cs + hci_uart instead */ | |
711 | PCMCIA_DEVICE_NULL | |
712 | }; | |
713 | MODULE_DEVICE_TABLE(pcmcia, btuart_ids); | |
714 | ||
1da177e4 LT |
715 | static struct pcmcia_driver btuart_driver = { |
716 | .owner = THIS_MODULE, | |
717 | .drv = { | |
718 | .name = "btuart_cs", | |
719 | }, | |
15b99ac1 | 720 | .probe = btuart_probe, |
cc3b4866 | 721 | .remove = btuart_detach, |
279c9361 | 722 | .id_table = btuart_ids, |
1da177e4 LT |
723 | }; |
724 | ||
725 | static int __init init_btuart_cs(void) | |
726 | { | |
727 | return pcmcia_register_driver(&btuart_driver); | |
728 | } | |
729 | ||
730 | ||
731 | static void __exit exit_btuart_cs(void) | |
732 | { | |
733 | pcmcia_unregister_driver(&btuart_driver); | |
1da177e4 LT |
734 | } |
735 | ||
736 | module_init(init_btuart_cs); | |
737 | module_exit(exit_btuart_cs); |