Commit | Line | Data |
---|---|---|
9670d80a VK |
1 | /* |
2 | * Copyright (c) 2008-2009 Atheros Communications Inc. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, | |
10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | * GNU General Public License for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software | |
16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
17 | * | |
18 | */ | |
19 | ||
20 | ||
21 | #include <linux/module.h> | |
22 | #include <linux/kernel.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/slab.h> | |
25 | #include <linux/types.h> | |
26 | #include <linux/errno.h> | |
27 | #include <linux/device.h> | |
28 | #include <linux/firmware.h> | |
29 | #include <linux/usb.h> | |
30 | #include <net/bluetooth/bluetooth.h> | |
31 | ||
32 | #define VERSION "1.0" | |
c3eae82a | 33 | #define ATH3K_FIRMWARE "ath3k-1.fw" |
9670d80a | 34 | |
d9f51b51 BS |
35 | #define ATH3K_DNLOAD 0x01 |
36 | #define ATH3K_GETSTATE 0x05 | |
37 | #define ATH3K_SET_NORMAL_MODE 0x07 | |
38 | #define ATH3K_GETVERSION 0x09 | |
39 | #define USB_REG_SWITCH_VID_PID 0x0a | |
40 | ||
41 | #define ATH3K_MODE_MASK 0x3F | |
42 | #define ATH3K_NORMAL_MODE 0x0E | |
43 | ||
44 | #define ATH3K_PATCH_UPDATE 0x80 | |
45 | #define ATH3K_SYSCFG_UPDATE 0x40 | |
46 | ||
47 | #define ATH3K_XTAL_FREQ_26M 0x00 | |
48 | #define ATH3K_XTAL_FREQ_40M 0x01 | |
49 | #define ATH3K_XTAL_FREQ_19P2 0x02 | |
50 | #define ATH3K_NAME_LEN 0xFF | |
51 | ||
52 | struct ath3k_version { | |
53 | unsigned int rom_version; | |
54 | unsigned int build_version; | |
55 | unsigned int ram_version; | |
56 | unsigned char ref_clock; | |
57 | unsigned char reserved[0x07]; | |
58 | }; | |
9670d80a VK |
59 | |
60 | static struct usb_device_id ath3k_table[] = { | |
61 | /* Atheros AR3011 */ | |
62 | { USB_DEVICE(0x0CF3, 0x3000) }, | |
be93112a BS |
63 | |
64 | /* Atheros AR3011 with sflash firmware*/ | |
65 | { USB_DEVICE(0x0CF3, 0x3002) }, | |
6eda541d | 66 | { USB_DEVICE(0x0CF3, 0xE019) }, |
2a7bcccc | 67 | { USB_DEVICE(0x13d3, 0x3304) }, |
8e7c3d2e | 68 | { USB_DEVICE(0x0930, 0x0215) }, |
6b6ba88b | 69 | { USB_DEVICE(0x0489, 0xE03D) }, |
acd94544 | 70 | { USB_DEVICE(0x0489, 0xE027) }, |
be93112a | 71 | |
509e7861 CYC |
72 | /* Atheros AR9285 Malbec with sflash firmware */ |
73 | { USB_DEVICE(0x03F0, 0x311D) }, | |
d9f51b51 BS |
74 | |
75 | /* Atheros AR3012 with sflash firmware*/ | |
76 | { USB_DEVICE(0x0CF3, 0x3004) }, | |
07c0ea87 | 77 | { USB_DEVICE(0x0CF3, 0x311D) }, |
9498ba7a | 78 | { USB_DEVICE(0x13d3, 0x3375) }, |
55ed7d4d | 79 | { USB_DEVICE(0x04CA, 0x3005) }, |
2c262b2a | 80 | { USB_DEVICE(0x04CA, 0x3006) }, |
87522a43 | 81 | { USB_DEVICE(0x13d3, 0x3362) }, |
ac71311e | 82 | { USB_DEVICE(0x0CF3, 0xE004) }, |
6c4ae5c2 | 83 | { USB_DEVICE(0x0930, 0x0219) }, |
2096ae6c | 84 | { USB_DEVICE(0x0489, 0xe057) }, |
eed307e2 | 85 | { USB_DEVICE(0x13d3, 0x3393) }, |
3a61eda8 | 86 | { USB_DEVICE(0x0489, 0xe04e) }, |
2582d529 | 87 | { USB_DEVICE(0x0489, 0xe056) }, |
d9f51b51 | 88 | |
e9036e33 CYC |
89 | /* Atheros AR5BBU12 with sflash firmware */ |
90 | { USB_DEVICE(0x0489, 0xE02C) }, | |
b67afe7f | 91 | |
85d59726 MG |
92 | /* Atheros AR5BBU22 with sflash firmware */ |
93 | { USB_DEVICE(0x0489, 0xE03C) }, | |
bc21fde2 | 94 | { USB_DEVICE(0x0489, 0xE036) }, |
85d59726 | 95 | |
9670d80a VK |
96 | { } /* Terminating entry */ |
97 | }; | |
98 | ||
99 | MODULE_DEVICE_TABLE(usb, ath3k_table); | |
100 | ||
d9f51b51 BS |
101 | #define BTUSB_ATH3012 0x80 |
102 | /* This table is to load patch and sysconfig files | |
103 | * for AR3012 */ | |
104 | static struct usb_device_id ath3k_blist_tbl[] = { | |
105 | ||
106 | /* Atheros AR3012 with sflash firmware*/ | |
107 | { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, | |
07c0ea87 | 108 | { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, |
9498ba7a | 109 | { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, |
55ed7d4d | 110 | { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, |
2c262b2a | 111 | { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, |
87522a43 | 112 | { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, |
ac71311e | 113 | { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, |
6c4ae5c2 | 114 | { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, |
2096ae6c | 115 | { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, |
eed307e2 | 116 | { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, |
3a61eda8 | 117 | { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, |
2582d529 | 118 | { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, |
d9f51b51 | 119 | |
85d59726 MG |
120 | /* Atheros AR5BBU22 with sflash firmware */ |
121 | { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, | |
bc21fde2 | 122 | { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 }, |
85d59726 | 123 | |
d9f51b51 BS |
124 | { } /* Terminating entry */ |
125 | }; | |
126 | ||
9670d80a VK |
127 | #define USB_REQ_DFU_DNLOAD 1 |
128 | #define BULK_SIZE 4096 | |
d9f51b51 | 129 | #define FW_HDR_SIZE 20 |
9670d80a | 130 | |
86e09287 AH |
131 | static int ath3k_load_firmware(struct usb_device *udev, |
132 | const struct firmware *firmware) | |
9670d80a VK |
133 | { |
134 | u8 *send_buf; | |
135 | int err, pipe, len, size, sent = 0; | |
86e09287 | 136 | int count = firmware->size; |
9670d80a | 137 | |
86e09287 | 138 | BT_DBG("udev %p", udev); |
9670d80a | 139 | |
86e09287 | 140 | pipe = usb_sndctrlpipe(udev, 0); |
9670d80a | 141 | |
52a1020e | 142 | send_buf = kmalloc(BULK_SIZE, GFP_KERNEL); |
86e09287 AH |
143 | if (!send_buf) { |
144 | BT_ERR("Can't allocate memory chunk for firmware"); | |
145 | return -ENOMEM; | |
146 | } | |
147 | ||
148 | memcpy(send_buf, firmware->data, 20); | |
149 | if ((err = usb_control_msg(udev, pipe, | |
9670d80a VK |
150 | USB_REQ_DFU_DNLOAD, |
151 | USB_TYPE_VENDOR, 0, 0, | |
86e09287 | 152 | send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) { |
9670d80a | 153 | BT_ERR("Can't change to loading configuration err"); |
86e09287 | 154 | goto error; |
9670d80a VK |
155 | } |
156 | sent += 20; | |
157 | count -= 20; | |
158 | ||
9670d80a VK |
159 | while (count) { |
160 | size = min_t(uint, count, BULK_SIZE); | |
86e09287 AH |
161 | pipe = usb_sndbulkpipe(udev, 0x02); |
162 | memcpy(send_buf, firmware->data + sent, size); | |
9670d80a | 163 | |
86e09287 | 164 | err = usb_bulk_msg(udev, pipe, send_buf, size, |
9670d80a VK |
165 | &len, 3000); |
166 | ||
167 | if (err || (len != size)) { | |
168 | BT_ERR("Error in firmware loading err = %d," | |
169 | "len = %d, size = %d", err, len, size); | |
170 | goto error; | |
171 | } | |
172 | ||
173 | sent += size; | |
174 | count -= size; | |
175 | } | |
176 | ||
9670d80a VK |
177 | error: |
178 | kfree(send_buf); | |
179 | return err; | |
180 | } | |
181 | ||
d9f51b51 BS |
182 | static int ath3k_get_state(struct usb_device *udev, unsigned char *state) |
183 | { | |
184 | int pipe = 0; | |
185 | ||
186 | pipe = usb_rcvctrlpipe(udev, 0); | |
187 | return usb_control_msg(udev, pipe, ATH3K_GETSTATE, | |
188 | USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, | |
189 | state, 0x01, USB_CTRL_SET_TIMEOUT); | |
190 | } | |
191 | ||
192 | static int ath3k_get_version(struct usb_device *udev, | |
193 | struct ath3k_version *version) | |
194 | { | |
195 | int pipe = 0; | |
196 | ||
197 | pipe = usb_rcvctrlpipe(udev, 0); | |
198 | return usb_control_msg(udev, pipe, ATH3K_GETVERSION, | |
199 | USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version, | |
200 | sizeof(struct ath3k_version), | |
201 | USB_CTRL_SET_TIMEOUT); | |
202 | } | |
203 | ||
204 | static int ath3k_load_fwfile(struct usb_device *udev, | |
205 | const struct firmware *firmware) | |
206 | { | |
207 | u8 *send_buf; | |
208 | int err, pipe, len, size, count, sent = 0; | |
209 | int ret; | |
210 | ||
211 | count = firmware->size; | |
212 | ||
52a1020e | 213 | send_buf = kmalloc(BULK_SIZE, GFP_KERNEL); |
d9f51b51 BS |
214 | if (!send_buf) { |
215 | BT_ERR("Can't allocate memory chunk for firmware"); | |
216 | return -ENOMEM; | |
217 | } | |
218 | ||
219 | size = min_t(uint, count, FW_HDR_SIZE); | |
220 | memcpy(send_buf, firmware->data, size); | |
221 | ||
222 | pipe = usb_sndctrlpipe(udev, 0); | |
223 | ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD, | |
224 | USB_TYPE_VENDOR, 0, 0, send_buf, | |
225 | size, USB_CTRL_SET_TIMEOUT); | |
226 | if (ret < 0) { | |
227 | BT_ERR("Can't change to loading configuration err"); | |
228 | kfree(send_buf); | |
229 | return ret; | |
230 | } | |
231 | ||
232 | sent += size; | |
233 | count -= size; | |
234 | ||
235 | while (count) { | |
236 | size = min_t(uint, count, BULK_SIZE); | |
237 | pipe = usb_sndbulkpipe(udev, 0x02); | |
238 | ||
239 | memcpy(send_buf, firmware->data + sent, size); | |
240 | ||
241 | err = usb_bulk_msg(udev, pipe, send_buf, size, | |
242 | &len, 3000); | |
243 | if (err || (len != size)) { | |
244 | BT_ERR("Error in firmware loading err = %d," | |
245 | "len = %d, size = %d", err, len, size); | |
246 | kfree(send_buf); | |
247 | return err; | |
248 | } | |
249 | sent += size; | |
250 | count -= size; | |
251 | } | |
252 | ||
253 | kfree(send_buf); | |
254 | return 0; | |
255 | } | |
256 | ||
257 | static int ath3k_switch_pid(struct usb_device *udev) | |
258 | { | |
259 | int pipe = 0; | |
260 | ||
261 | pipe = usb_sndctrlpipe(udev, 0); | |
262 | return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID, | |
263 | USB_TYPE_VENDOR, 0, 0, | |
264 | NULL, 0, USB_CTRL_SET_TIMEOUT); | |
265 | } | |
266 | ||
267 | static int ath3k_set_normal_mode(struct usb_device *udev) | |
268 | { | |
269 | unsigned char fw_state; | |
270 | int pipe = 0, ret; | |
271 | ||
272 | ret = ath3k_get_state(udev, &fw_state); | |
273 | if (ret < 0) { | |
274 | BT_ERR("Can't get state to change to normal mode err"); | |
275 | return ret; | |
276 | } | |
277 | ||
278 | if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) { | |
279 | BT_DBG("firmware was already in normal mode"); | |
280 | return 0; | |
281 | } | |
282 | ||
283 | pipe = usb_sndctrlpipe(udev, 0); | |
284 | return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE, | |
285 | USB_TYPE_VENDOR, 0, 0, | |
286 | NULL, 0, USB_CTRL_SET_TIMEOUT); | |
287 | } | |
288 | ||
289 | static int ath3k_load_patch(struct usb_device *udev) | |
290 | { | |
291 | unsigned char fw_state; | |
292 | char filename[ATH3K_NAME_LEN] = {0}; | |
293 | const struct firmware *firmware; | |
294 | struct ath3k_version fw_version, pt_version; | |
295 | int ret; | |
296 | ||
297 | ret = ath3k_get_state(udev, &fw_state); | |
298 | if (ret < 0) { | |
299 | BT_ERR("Can't get state to change to load ram patch err"); | |
300 | return ret; | |
301 | } | |
302 | ||
303 | if (fw_state & ATH3K_PATCH_UPDATE) { | |
304 | BT_DBG("Patch was already downloaded"); | |
305 | return 0; | |
306 | } | |
307 | ||
308 | ret = ath3k_get_version(udev, &fw_version); | |
309 | if (ret < 0) { | |
310 | BT_ERR("Can't get version to change to load ram patch err"); | |
311 | return ret; | |
312 | } | |
313 | ||
314 | snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu", | |
315 | fw_version.rom_version); | |
316 | ||
317 | ret = request_firmware(&firmware, filename, &udev->dev); | |
318 | if (ret < 0) { | |
319 | BT_ERR("Patch file not found %s", filename); | |
320 | return ret; | |
321 | } | |
322 | ||
323 | pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8); | |
324 | pt_version.build_version = *(int *) | |
325 | (firmware->data + firmware->size - 4); | |
326 | ||
327 | if ((pt_version.rom_version != fw_version.rom_version) || | |
328 | (pt_version.build_version <= fw_version.build_version)) { | |
329 | BT_ERR("Patch file version did not match with firmware"); | |
330 | release_firmware(firmware); | |
331 | return -EINVAL; | |
332 | } | |
333 | ||
334 | ret = ath3k_load_fwfile(udev, firmware); | |
335 | release_firmware(firmware); | |
336 | ||
337 | return ret; | |
338 | } | |
339 | ||
340 | static int ath3k_load_syscfg(struct usb_device *udev) | |
341 | { | |
342 | unsigned char fw_state; | |
343 | char filename[ATH3K_NAME_LEN] = {0}; | |
344 | const struct firmware *firmware; | |
345 | struct ath3k_version fw_version; | |
346 | int clk_value, ret; | |
347 | ||
348 | ret = ath3k_get_state(udev, &fw_state); | |
349 | if (ret < 0) { | |
350 | BT_ERR("Can't get state to change to load configration err"); | |
351 | return -EBUSY; | |
352 | } | |
353 | ||
354 | ret = ath3k_get_version(udev, &fw_version); | |
355 | if (ret < 0) { | |
356 | BT_ERR("Can't get version to change to load ram patch err"); | |
357 | return ret; | |
358 | } | |
359 | ||
360 | switch (fw_version.ref_clock) { | |
361 | ||
362 | case ATH3K_XTAL_FREQ_26M: | |
363 | clk_value = 26; | |
364 | break; | |
365 | case ATH3K_XTAL_FREQ_40M: | |
366 | clk_value = 40; | |
367 | break; | |
368 | case ATH3K_XTAL_FREQ_19P2: | |
369 | clk_value = 19; | |
370 | break; | |
371 | default: | |
372 | clk_value = 0; | |
373 | break; | |
374 | } | |
375 | ||
376 | snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s", | |
377 | fw_version.rom_version, clk_value, ".dfu"); | |
378 | ||
379 | ret = request_firmware(&firmware, filename, &udev->dev); | |
380 | if (ret < 0) { | |
381 | BT_ERR("Configuration file not found %s", filename); | |
382 | return ret; | |
383 | } | |
384 | ||
385 | ret = ath3k_load_fwfile(udev, firmware); | |
386 | release_firmware(firmware); | |
387 | ||
388 | return ret; | |
389 | } | |
390 | ||
9670d80a VK |
391 | static int ath3k_probe(struct usb_interface *intf, |
392 | const struct usb_device_id *id) | |
393 | { | |
394 | const struct firmware *firmware; | |
395 | struct usb_device *udev = interface_to_usbdev(intf); | |
84f0e17f | 396 | int ret; |
9670d80a VK |
397 | |
398 | BT_DBG("intf %p id %p", intf, id); | |
399 | ||
400 | if (intf->cur_altsetting->desc.bInterfaceNumber != 0) | |
401 | return -ENODEV; | |
402 | ||
d9f51b51 BS |
403 | /* match device ID in ath3k blacklist table */ |
404 | if (!id->driver_info) { | |
405 | const struct usb_device_id *match; | |
406 | match = usb_match_id(intf, ath3k_blist_tbl); | |
407 | if (match) | |
408 | id = match; | |
409 | } | |
410 | ||
411 | /* load patch and sysconfig files for AR3012 */ | |
412 | if (id->driver_info & BTUSB_ATH3012) { | |
2d25f8b4 SL |
413 | |
414 | /* New firmware with patch and sysconfig files already loaded */ | |
415 | if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001) | |
416 | return -ENODEV; | |
417 | ||
d9f51b51 BS |
418 | ret = ath3k_load_patch(udev); |
419 | if (ret < 0) { | |
420 | BT_ERR("Loading patch file failed"); | |
421 | return ret; | |
422 | } | |
423 | ret = ath3k_load_syscfg(udev); | |
424 | if (ret < 0) { | |
425 | BT_ERR("Loading sysconfig file failed"); | |
426 | return ret; | |
427 | } | |
428 | ret = ath3k_set_normal_mode(udev); | |
429 | if (ret < 0) { | |
430 | BT_ERR("Set normal mode failed"); | |
431 | return ret; | |
432 | } | |
433 | ath3k_switch_pid(udev); | |
434 | return 0; | |
435 | } | |
436 | ||
c3eae82a PF |
437 | ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev); |
438 | if (ret < 0) { | |
439 | if (ret == -ENOENT) | |
440 | BT_ERR("Firmware file \"%s\" not found", | |
441 | ATH3K_FIRMWARE); | |
442 | else | |
443 | BT_ERR("Firmware file \"%s\" request failed (err=%d)", | |
444 | ATH3K_FIRMWARE, ret); | |
445 | return ret; | |
9670d80a VK |
446 | } |
447 | ||
84f0e17f | 448 | ret = ath3k_load_firmware(udev, firmware); |
86e09287 | 449 | release_firmware(firmware); |
9670d80a | 450 | |
84f0e17f | 451 | return ret; |
9670d80a VK |
452 | } |
453 | ||
454 | static void ath3k_disconnect(struct usb_interface *intf) | |
455 | { | |
9670d80a | 456 | BT_DBG("ath3k_disconnect intf %p", intf); |
9670d80a VK |
457 | } |
458 | ||
459 | static struct usb_driver ath3k_driver = { | |
460 | .name = "ath3k", | |
461 | .probe = ath3k_probe, | |
462 | .disconnect = ath3k_disconnect, | |
463 | .id_table = ath3k_table, | |
e1f12eb6 | 464 | .disable_hub_initiated_lpm = 1, |
9670d80a VK |
465 | }; |
466 | ||
93f1508c | 467 | module_usb_driver(ath3k_driver); |
9670d80a VK |
468 | |
469 | MODULE_AUTHOR("Atheros Communications"); | |
470 | MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); | |
471 | MODULE_VERSION(VERSION); | |
472 | MODULE_LICENSE("GPL"); | |
c3eae82a | 473 | MODULE_FIRMWARE(ATH3K_FIRMWARE); |