[linux-block.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate
	select REGMAP

config BT_BCM
	tristate
	select FW_LOADER

config BT_RTL
	tristate
	select FW_LOADER

config BT_QCA
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTUSB_RTL
	bool "Realtek protocol support"
	depends on BT_HCIBTUSB
	select BT_RTL
	default y
	help
	  The Realtek protocol support enables firmware and configuration
	  download support for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_SERDEV
	bool
	depends on SERIAL_DEV_BUS && BT_HCIUART
	depends on SERIAL_DEV_BUS=y || SERIAL_DEV_BUS=BT_HCIUART
	default y

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_NOKIA
	tristate "UART Nokia H4+ protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on PM
	help
	  Nokia H4+ is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for Bluetooth devices
	  with UART interface in Nokia devices.

	  Say Y here to compile support for Nokia's H4+ protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART_SERDEV
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIUART_QCA
	bool "Qualcomm Atheros protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_QCA
	help
	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	  over serial port interface(H4) between controller and host.
	  This protocol is required for UART clock control for QCA Bluetooth
	  devices.

	  Say Y here to compile support for QCA protocol.

config BT_HCIUART_AG6XX
	bool "Intel AG6XX protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	  port interface for Intel ibt 2.1 Bluetooth controllers.

	  Say Y here to compile support for Intel AG6XX protocol.

config BT_HCIUART_MRVL
	bool "Marvell protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  Marvell is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Marvell Bluetooth
	  devices with UART interface.

	  Say Y here to compile support for HCI MRVL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB && BT_HCIUART
	select BT_HCIUART_H4
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

config BT_QCOMSMD
	tristate "Qualcomm SMD based HCI support"
	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
	select BT_QCA
	help
	  Qualcomm SMD based HCI driver.
	  This driver is used to bridge HCI data onto the shared memory
	  channels to the WCNSS core.

	  Say Y here to compile support for HCI over Qualcomm SMD into the
	  kernel or say M to compile as a module.

endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
48f0ed1b MH	5	config BT_INTEL
48f0ed1b MH	6	tristate
d06f107b	7	select REGMAP
48f0ed1b	8
4fba30f0 MH	9	config BT_BCM
4fba30f0 MH	10	tristate
1c8ba6d0	11	select FW_LOADER
4fba30f0	12
db33c77d CC	13	config BT_RTL
	14	tristate
	15	select FW_LOADER
	16
83e81961 BYTK	17	config BT_QCA
	18	tristate
	19	select FW_LOADER
	20
5e23b923	21	config BT_HCIBTUSB
9bfa35fe MH	22	tristate "HCI USB driver"
9bfa35fe MH	23	depends on USB
4185a0f5	24	select BT_INTEL
5e23b923 MH	25	help
	26	Bluetooth HCI USB driver.
	27	This driver is required if you want to use Bluetooth devices with
	28	USB interface.
	29
5e23b923 MH	30	Say Y here to compile support for Bluetooth USB devices into the
	31	kernel or say M to compile it as module (btusb).
	32
c2bfb100 MH	33	config BT_HCIBTUSB_BCM
	34	bool "Broadcom protocol support"
	35	depends on BT_HCIBTUSB
	36	select BT_BCM
	37	default y
	38	help
	39	The Broadcom protocol support enables firmware and patchram
	40	download support for Broadcom Bluetooth controllers.
	41
	42	Say Y here to compile support for Broadcom protocol.
	43
db33c77d CC	44	config BT_HCIBTUSB_RTL
	45	bool "Realtek protocol support"
	46	depends on BT_HCIBTUSB
	47	select BT_RTL
	48	default y
	49	help
	50	The Realtek protocol support enables firmware and configuration
	51	download support for Realtek Bluetooth controllers.
	52
	53	Say Y here to compile support for Realtek protocol.
	54
ddbaf13e MH	55	config BT_HCIBTSDIO
	56	tristate "HCI SDIO driver"
	57	depends on MMC
	58	help
	59	Bluetooth HCI SDIO driver.
	60	This driver is required if you want to use Bluetooth device with
	61	SDIO interface.
	62
	63	Say Y here to compile support for Bluetooth SDIO devices into the
	64	kernel or say M to compile it as module (btsdio).
	65
1da177e4 LT	66	config BT_HCIUART
1da177e4 LT	67	tristate "HCI UART driver"
4f73bc4d	68	depends on TTY
1da177e4 LT	69	help
	70	Bluetooth HCI UART driver.
	71	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	72	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	73	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	74	adapter and BrainBoxes Bluetooth PC Card.
	75
	76	Say Y here to compile support for Bluetooth UART devices into the
	77	kernel or say M to compile it as module (hci_uart).
	78
1fb78fb6 AB	79	config BT_HCIUART_SERDEV
	80	bool
	81	depends on SERIAL_DEV_BUS && BT_HCIUART
	82	depends on SERIAL_DEV_BUS=y \|\| SERIAL_DEV_BUS=BT_HCIUART
	83	default y
	84
1da177e4 LT	85	config BT_HCIUART_H4
	86	bool "UART (H4) protocol support"
	87	depends on BT_HCIUART
	88	help
8ba8b4c0 SG	89	UART (H4) is serial protocol for communication between Bluetooth
	90	device and host. This protocol is required for most Bluetooth devices
	91	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	92
	93	Say Y here to compile support for HCI UART (H4) protocol.
	94
7bb31868 SR	95	config BT_HCIUART_NOKIA
	96	tristate "UART Nokia H4+ protocol support"
	97	depends on BT_HCIUART
1fb78fb6	98	depends on BT_HCIUART_SERDEV
7bb31868 SR	99	depends on PM
	100	help
	101	Nokia H4+ is serial protocol for communication between Bluetooth
	102	device and host. This protocol is required for Bluetooth devices
	103	with UART interface in Nokia devices.
	104
	105	Say Y here to compile support for Nokia's H4+ protocol.
	106
1da177e4 LT	107	config BT_HCIUART_BCSP
	108	bool "BCSP protocol support"
	109	depends on BT_HCIUART
d3a8eab0	110	select BITREVERSE
1da177e4	111	help
8ba8b4c0	112	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	113	between Bluetooth device and host. This protocol is required for non
	114	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	115	CF cards.
	116
	117	Say Y here to compile support for HCI BCSP protocol.
	118
b3190df6 SS	119	config BT_HCIUART_ATH3K
	120	bool "Atheros AR300x serial support"
	121	depends on BT_HCIUART
d90aa682	122	select BT_HCIUART_H4
b3190df6 SS	123	help
	124	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	125	communication between host and Atheros AR300x Bluetooth devices.
	126	This protocol enables AR300x chips to be enabled with
	127	power management support.
	128	Enable this if you have Atheros AR300x serial Bluetooth device.
	129
	130	Say Y here to compile support for HCI UART ATH3K protocol.
	131
166d2f6a OBC	132	config BT_HCIUART_LL
166d2f6a OBC	133	bool "HCILL protocol support"
76c4969f	134	depends on BT_HCIUART_SERDEV
166d2f6a OBC	135	help
	136	HCILL (HCI Low Level) is a serial protocol for communication
	137	between Bluetooth device and host. This protocol is required for
	138	serial Bluetooth devices that are based on Texas Instruments'
	139	BRF chips.
	140
	141	Say Y here to compile support for HCILL protocol.
	142
7dec65c8 JH	143	config BT_HCIUART_3WIRE
	144	bool "Three-wire UART (H5) protocol support"
	145	depends on BT_HCIUART
	146	help
	147	The HCI Three-wire UART Transport Layer makes it possible to
	148	user the Bluetooth HCI over a serial port interface. The HCI
	149	Three-wire UART Transport Layer assumes that the UART
	150	communication may have bit errors, overrun errors or burst
	151	errors and thereby making CTS/RTS lines unnecessary.
	152
	153	Say Y here to compile support for Three-wire UART protocol.
	154
16e3887f MH	155	config BT_HCIUART_INTEL
	156	bool "Intel protocol support"
	157	depends on BT_HCIUART
ca93cee5	158	select BT_HCIUART_H4
bca03c95	159	select BT_INTEL
16e3887f MH	160	help
	161	The Intel protocol support enables Bluetooth HCI over serial
	162	port interface for Intel Bluetooth controllers.
	163
	164	Say Y here to compile support for Intel protocol.
	165
e9a2dd26 MH	166	config BT_HCIUART_BCM
	167	bool "Broadcom protocol support"
	168	depends on BT_HCIUART
bdd8818e	169	select BT_HCIUART_H4
3e0ac12a	170	select BT_BCM
e9a2dd26 MH	171	help
	172	The Broadcom protocol support enables Bluetooth HCI over serial
	173	port interface for Broadcom Bluetooth controllers.
	174
	175	Say Y here to compile support for Broadcom protocol.
	176
0ff252c1 BYTK	177	config BT_HCIUART_QCA
	178	bool "Qualcomm Atheros protocol support"
	179	depends on BT_HCIUART
	180	select BT_HCIUART_H4
	181	select BT_QCA
	182	help
	183	The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	184	over serial port interface(H4) between controller and host.
	185	This protocol is required for UART clock control for QCA Bluetooth
	186	devices.
	187
	188	Say Y here to compile support for QCA protocol.
	189
395174bb LP	190	config BT_HCIUART_AG6XX
	191	bool "Intel AG6XX protocol support"
	192	depends on BT_HCIUART
	193	select BT_HCIUART_H4
	194	select BT_INTEL
	195	help
	196	The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	197	port interface for Intel ibt 2.1 Bluetooth controllers.
	198
	199	Say Y here to compile support for Intel AG6XX protocol.
162f812f LP	200
	201	config BT_HCIUART_MRVL
	202	bool "Marvell protocol support"
	203	depends on BT_HCIUART
	204	select BT_HCIUART_H4
	205	help
	206	Marvell is serial protocol for communication between Bluetooth
	207	device and host. This protocol is required for most Marvell Bluetooth
	208	devices with UART interface.
	209
	210	Say Y here to compile support for HCI MRVL protocol.
395174bb	211
1da177e4 LT	212	config BT_HCIBCM203X
	213	tristate "HCI BCM203x USB driver"
	214	depends on USB
	215	select FW_LOADER
	216	help
	217	Bluetooth HCI BCM203x USB driver.
	218	This driver provides the firmware loading mechanism for the Broadcom
	219	Blutonium based devices.
	220
	221	Say Y here to compile support for HCI BCM203x devices into the
	222	kernel or say M to compile it as module (bcm203x).
	223
	224	config BT_HCIBPA10X
	225	tristate "HCI BPA10x USB driver"
7841d06e	226	depends on USB && BT_HCIUART
943cc592	227	select BT_HCIUART_H4
1da177e4 LT	228	help
	229	Bluetooth HCI BPA10x USB driver.
	230	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	231	sniffer devices.
	232
	233	Say Y here to compile support for HCI BPA10x devices into the
	234	kernel or say M to compile it as module (bpa10x).
	235
	236	config BT_HCIBFUSB
	237	tristate "HCI BlueFRITZ! USB driver"
	238	depends on USB
	239	select FW_LOADER
	240	help
	241	Bluetooth HCI BlueFRITZ! USB driver.
	242	This driver provides support for Bluetooth USB devices with AVM
	243	interface:
	244	AVM BlueFRITZ! USB
	245
	246	Say Y here to compile support for HCI BFUSB devices into the
	247	kernel or say M to compile it as module (bfusb).
	248
	249	config BT_HCIDTL1
	250	tristate "HCI DTL1 (PC Card) driver"
	251	depends on PCMCIA
	252	help
	253	Bluetooth HCI DTL1 (PC Card) driver.
	254	This driver provides support for Bluetooth PCMCIA devices with
	255	Nokia DTL1 interface:
	256	Nokia Bluetooth Card
	257	Socket Bluetooth CF Card
	258
	259	Say Y here to compile support for HCI DTL1 devices into the
	260	kernel or say M to compile it as module (dtl1_cs).
	261
	262	config BT_HCIBT3C
	263	tristate "HCI BT3C (PC Card) driver"
	264	depends on PCMCIA
	265	select FW_LOADER
	266	help
	267	Bluetooth HCI BT3C (PC Card) driver.
	268	This driver provides support for Bluetooth PCMCIA devices with
	269	3Com BT3C interface:
	270	3Com Bluetooth Card (3CRWB6096)
	271	HP Bluetooth Card
	272
	273	Say Y here to compile support for HCI BT3C devices into the
	274	kernel or say M to compile it as module (bt3c_cs).
	275
	276	config BT_HCIBLUECARD
	277	tristate "HCI BlueCard (PC Card) driver"
	278	depends on PCMCIA
	279	help
	280	Bluetooth HCI BlueCard (PC Card) driver.
	281	This driver provides support for Bluetooth PCMCIA devices with
	282	Anycom BlueCard interface:
	283	Anycom Bluetooth PC Card
	284	Anycom Bluetooth CF Card
	285
	286	Say Y here to compile support for HCI BlueCard devices into the
	287	kernel or say M to compile it as module (bluecard_cs).
	288
	289	config BT_HCIBTUART
	290	tristate "HCI UART (PC Card) device driver"
	291	depends on PCMCIA
292	help
293	Bluetooth HCI UART (PC Card) driver.
294	This driver provides support for Bluetooth PCMCIA devices with
295	an UART interface:
296	Xircom CreditCard Bluetooth Adapter
297	Xircom RealPort2 Bluetooth Adapter
298	Sphinx PICO Card
299	H-Soft blue+Card
300	Cyber-blue Compact Flash Card
301
302	Say Y here to compile support for HCI UART devices into the
303	kernel or say M to compile it as module (btuart_cs).
304
305	config BT_HCIVHCI
306	tristate "HCI VHCI (Virtual HCI device) driver"
307	help
308	Bluetooth Virtual HCI device driver.
309	This driver is required if you want to use HCI Emulation software.
310
311	Say Y here to compile support for virtual HCI devices into the
312	kernel or say M to compile it as module (hci_vhci).
313
132ff4e5 BZ	314	config BT_MRVL
132ff4e5 BZ	315	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	316	help
	317	The core driver to support Marvell Bluetooth devices.
	318
	319	This driver is required if you want to support
f0ef6748	320	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
132ff4e5 BZ	321
	322	Say Y here to compile Marvell Bluetooth driver
	323	into the kernel or say M to compile it as module.
	324
789221ec BZ	325	config BT_MRVL_SDIO
	326	tristate "Marvell BT-over-SDIO driver"
	327	depends on BT_MRVL && MMC
e7a25f98	328	select FW_LOADER
dc759613	329	select WANT_DEV_COREDUMP
789221ec BZ	330	help
	331	The driver for Marvell Bluetooth chipsets with SDIO interface.
	332
	333	This driver is required if you want to use Marvell Bluetooth
f0ef6748	334	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
2ac654f7	335	chipsets are supported.
789221ec BZ	336
	337	Say Y here to compile support for Marvell BT-over-SDIO driver
	338	into the kernel or say M to compile it as module.
	339
9670d80a VK	340	config BT_ATH3K
	341	tristate "Atheros firmware download driver"
	342	depends on BT_HCIBTUSB
	343	select FW_LOADER
	344	help
	345	Bluetooth firmware download driver.
	346	This driver loads the firmware into the Atheros Bluetooth
	347	chipset.
1da177e4	348
9670d80a VK	349	Say Y here to compile support for "Atheros firmware download driver"
	350	into the kernel or say M to compile it as module (ath3k).
	351
363907af PS	352	config BT_WILINK
	353	tristate "Texas Instruments WiLink7 driver"
	354	depends on TI_ST
	355	help
	356	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	357	combo devices. This makes use of shared transport line discipline
	358	core driver to communicate with the BT core of the combo chip.
	359
	360	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	361	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	362
1511cc75 BA	363	config BT_QCOMSMD
1511cc75 BA	364	tristate "Qualcomm SMD based HCI support"
5052de8d	365	depends on RPMSG \|\| (COMPILE_TEST && RPMSG=n)
6e9e6cc8	366	depends on QCOM_WCNSS_CTRL \|\| (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
1511cc75 BA	367	select BT_QCA
	368	help
	369	Qualcomm SMD based HCI driver.
	370	This driver is used to bridge HCI data onto the shared memory
	371	channels to the WCNSS core.
	372
	373	Say Y here to compile support for HCI over Qualcomm SMD into the
	374	kernel or say M to compile as a module.
	375
9670d80a	376	endmenu