[linux-block.git] / drivers / bluetooth / Kconfig

# SPDX-License-Identifier: GPL-2.0

menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate
	select REGMAP

config BT_BCM
	tristate
	select FW_LOADER

config BT_RTL
	tristate
	select FW_LOADER

config BT_QCA
	tristate
	select FW_LOADER

config BT_MTK
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_AUTOSUSPEND
	bool "Enable USB autosuspend for Bluetooth USB devices by default"
	depends on BT_HCIBTUSB
	help
	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
	  default.

	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
	  on the kernel commandline.

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTUSB_MTK
	bool "MediaTek protocol support"
	depends on BT_HCIBTUSB
	select BT_MTK
	default n
	help
	  The MediaTek protocol support enables firmware download
	  support and chip initialization for MediaTek Bluetooth
	  USB controllers.

	  Say Y here to compile support for MediaTek protocol.

config BT_HCIBTUSB_RTL
	bool "Realtek protocol support"
	depends on BT_HCIBTUSB
	select BT_RTL
	default y
	help
	  The Realtek protocol support enables firmware and configuration
	  download support for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
	depends on NVMEM || !NVMEM
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_SERDEV
	bool
	depends on SERIAL_DEV_BUS && BT_HCIUART
	default y

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_NOKIA
	tristate "UART Nokia H4+ protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on PM
	select BT_HCIUART_H4
	select BT_BCM
	help
	  Nokia H4+ is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for Bluetooth devices
	  with UART interface in Nokia devices.

	  Say Y here to compile support for Nokia's H4+ protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIUART_RTL
	bool "Realtek protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
	select BT_HCIUART_3WIRE
	select BT_RTL
	help
	  The Realtek protocol support enables Bluetooth HCI over 3-Wire
	  serial port interface for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIUART_QCA
	bool "Qualcomm Atheros protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	select BT_QCA
	help
	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	  over serial port interface(H4) between controller and host.
	  This protocol is required for UART clock control for QCA Bluetooth
	  devices.

	  Say Y here to compile support for QCA protocol.

config BT_HCIUART_AG6XX
	bool "Intel AG6XX protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	  port interface for Intel ibt 2.1 Bluetooth controllers.

	  Say Y here to compile support for Intel AG6XX protocol.

config BT_HCIUART_MRVL
	bool "Marvell protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	help
	  Marvell is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Marvell Bluetooth
	  devices with UART interface.

	  Say Y here to compile support for HCI MRVL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_MTKSDIO
	tristate "MediaTek HCI SDIO driver"
	depends on MMC
	select BT_MTK
	help
	  MediaTek Bluetooth HCI SDIO driver.
	  This driver is required if you want to use MediaTek Bluetooth
	  with SDIO interface.

	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
	  into the kernel or say M to compile it as module (btmtksdio).

config BT_MTKUART
	tristate "MediaTek HCI UART driver"
	depends on SERIAL_DEV_BUS
	select BT_MTK
	help
	  MediaTek Bluetooth HCI UART driver.
	  This driver is required if you want to use MediaTek Bluetooth
	  with serial interface.

	  Say Y here to compile support for MediaTek Bluetooth UART devices
	  into the kernel or say M to compile it as module (btmtkuart).

config BT_QCOMSMD
	tristate "Qualcomm SMD based HCI support"
	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
	select BT_QCA
	help
	  Qualcomm SMD based HCI driver.
	  This driver is used to bridge HCI data onto the shared memory
	  channels to the WCNSS core.

	  Say Y here to compile support for HCI over Qualcomm SMD into the
	  kernel or say M to compile as a module.

config BT_HCIRSI
	tristate
	help
	  Redpine BT driver.
	  This driver handles BT traffic from upper layers and pass
	  to the RSI_91x coex module for further scheduling to device

	  Say Y here to compile support for HCI over Redpine into the
	  kernel or say M to compile as a module.

config BT_VIRTIO
	tristate "Virtio Bluetooth driver"
	depends on VIRTIO
	help
	  Virtio Bluetooth support driver.
	  This driver supports Virtio Bluetooth devices.

	  Say Y here to compile support for HCI over Virtio into the
	  kernel or say M to compile as a module.

endmenu
Commit	Line	Data
b2441318	1	# SPDX-License-Identifier: GPL-2.0
1da177e4 LT	2
	3	menu "Bluetooth device drivers"
	4	depends on BT
	5
48f0ed1b MH	6	config BT_INTEL
48f0ed1b MH	7	tristate
d06f107b	8	select REGMAP
48f0ed1b	9
4fba30f0 MH	10	config BT_BCM
4fba30f0 MH	11	tristate
1c8ba6d0	12	select FW_LOADER
4fba30f0	13
db33c77d CC	14	config BT_RTL
	15	tristate
	16	select FW_LOADER
	17
83e81961 BYTK	18	config BT_QCA
	19	tristate
	20	select FW_LOADER
	21
8c0d17b6 SW	22	config BT_MTK
	23	tristate
	24	select FW_LOADER
	25
5e23b923	26	config BT_HCIBTUSB
9bfa35fe MH	27	tristate "HCI USB driver"
9bfa35fe MH	28	depends on USB
4185a0f5	29	select BT_INTEL
5e23b923 MH	30	help
	31	Bluetooth HCI USB driver.
	32	This driver is required if you want to use Bluetooth devices with
	33	USB interface.
	34
5e23b923 MH	35	Say Y here to compile support for Bluetooth USB devices into the
	36	kernel or say M to compile it as module (btusb).
	37
eff2d68c	38	config BT_HCIBTUSB_AUTOSUSPEND
e7232d18	39	bool "Enable USB autosuspend for Bluetooth USB devices by default"
eff2d68c HG	40	depends on BT_HCIBTUSB
	41	help
	42	Say Y here to enable USB autosuspend for Bluetooth USB devices by
	43	default.
	44
	45	This can be overridden by passing btusb.enable_autosuspend=[y\|n]
	46	on the kernel commandline.
	47
c2bfb100 MH	48	config BT_HCIBTUSB_BCM
	49	bool "Broadcom protocol support"
	50	depends on BT_HCIBTUSB
	51	select BT_BCM
	52	default y
	53	help
	54	The Broadcom protocol support enables firmware and patchram
	55	download support for Broadcom Bluetooth controllers.
	56
	57	Say Y here to compile support for Broadcom protocol.
	58
a1c49c43 SW	59	config BT_HCIBTUSB_MTK
	60	bool "MediaTek protocol support"
	61	depends on BT_HCIBTUSB
8c0d17b6	62	select BT_MTK
a1c49c43 SW	63	default n
	64	help
	65	The MediaTek protocol support enables firmware download
	66	support and chip initialization for MediaTek Bluetooth
	67	USB controllers.
	68
	69	Say Y here to compile support for MediaTek protocol.
	70
db33c77d CC	71	config BT_HCIBTUSB_RTL
	72	bool "Realtek protocol support"
	73	depends on BT_HCIBTUSB
	74	select BT_RTL
	75	default y
	76	help
	77	The Realtek protocol support enables firmware and configuration
	78	download support for Realtek Bluetooth controllers.
	79
	80	Say Y here to compile support for Realtek protocol.
	81
ddbaf13e MH	82	config BT_HCIBTSDIO
	83	tristate "HCI SDIO driver"
	84	depends on MMC
	85	help
	86	Bluetooth HCI SDIO driver.
	87	This driver is required if you want to use Bluetooth device with
	88	SDIO interface.
	89
	90	Say Y here to compile support for Bluetooth SDIO devices into the
	91	kernel or say M to compile it as module (btsdio).
	92
1da177e4 LT	93	config BT_HCIUART
1da177e4 LT	94	tristate "HCI UART driver"
05e89fb5	95	depends on SERIAL_DEV_BUS \|\| !SERIAL_DEV_BUS
b71b25fe	96	depends on NVMEM \|\| !NVMEM
4f73bc4d	97	depends on TTY
1da177e4 LT	98	help
	99	Bluetooth HCI UART driver.
	100	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	101	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	102	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	103	adapter and BrainBoxes Bluetooth PC Card.
	104
	105	Say Y here to compile support for Bluetooth UART devices into the
	106	kernel or say M to compile it as module (hci_uart).
	107
1fb78fb6 AB	108	config BT_HCIUART_SERDEV
	109	bool
	110	depends on SERIAL_DEV_BUS && BT_HCIUART
1fb78fb6 AB	111	default y
1fb78fb6 AB	112
1da177e4 LT	113	config BT_HCIUART_H4
	114	bool "UART (H4) protocol support"
	115	depends on BT_HCIUART
	116	help
8ba8b4c0 SG	117	UART (H4) is serial protocol for communication between Bluetooth
	118	device and host. This protocol is required for most Bluetooth devices
	119	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	120
	121	Say Y here to compile support for HCI UART (H4) protocol.
	122
7bb31868 SR	123	config BT_HCIUART_NOKIA
	124	tristate "UART Nokia H4+ protocol support"
	125	depends on BT_HCIUART
1fb78fb6	126	depends on BT_HCIUART_SERDEV
a3a446c7	127	depends on GPIOLIB
7bb31868	128	depends on PM
c42c88e6	129	select BT_HCIUART_H4
6a485420	130	select BT_BCM
7bb31868 SR	131	help
	132	Nokia H4+ is serial protocol for communication between Bluetooth
	133	device and host. This protocol is required for Bluetooth devices
	134	with UART interface in Nokia devices.
	135
	136	Say Y here to compile support for Nokia's H4+ protocol.
	137
1da177e4 LT	138	config BT_HCIUART_BCSP
	139	bool "BCSP protocol support"
	140	depends on BT_HCIUART
d3a8eab0	141	select BITREVERSE
1da177e4	142	help
8ba8b4c0	143	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	144	between Bluetooth device and host. This protocol is required for non
	145	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	146	CF cards.
	147
	148	Say Y here to compile support for HCI BCSP protocol.
	149
b3190df6 SS	150	config BT_HCIUART_ATH3K
	151	bool "Atheros AR300x serial support"
	152	depends on BT_HCIUART
d90aa682	153	select BT_HCIUART_H4
b3190df6 SS	154	help
	155	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	156	communication between host and Atheros AR300x Bluetooth devices.
	157	This protocol enables AR300x chips to be enabled with
	158	power management support.
	159	Enable this if you have Atheros AR300x serial Bluetooth device.
	160
	161	Say Y here to compile support for HCI UART ATH3K protocol.
	162
166d2f6a OBC	163	config BT_HCIUART_LL
166d2f6a OBC	164	bool "HCILL protocol support"
76c4969f	165	depends on BT_HCIUART_SERDEV
f9d7c8fd	166	select BT_HCIUART_H4
166d2f6a OBC	167	help
	168	HCILL (HCI Low Level) is a serial protocol for communication
	169	between Bluetooth device and host. This protocol is required for
	170	serial Bluetooth devices that are based on Texas Instruments'
	171	BRF chips.
	172
	173	Say Y here to compile support for HCILL protocol.
	174
7dec65c8 JH	175	config BT_HCIUART_3WIRE
	176	bool "Three-wire UART (H5) protocol support"
	177	depends on BT_HCIUART
6c3711ec	178	depends on BT_HCIUART_SERDEV
7dec65c8 JH	179	help
	180	The HCI Three-wire UART Transport Layer makes it possible to
	181	user the Bluetooth HCI over a serial port interface. The HCI
	182	Three-wire UART Transport Layer assumes that the UART
	183	communication may have bit errors, overrun errors or burst
	184	errors and thereby making CTS/RTS lines unnecessary.
	185
	186	Say Y here to compile support for Three-wire UART protocol.
	187
16e3887f MH	188	config BT_HCIUART_INTEL
	189	bool "Intel protocol support"
	190	depends on BT_HCIUART
a3a446c7	191	depends on GPIOLIB
ca93cee5	192	select BT_HCIUART_H4
bca03c95	193	select BT_INTEL
16e3887f MH	194	help
	195	The Intel protocol support enables Bluetooth HCI over serial
	196	port interface for Intel Bluetooth controllers.
	197
	198	Say Y here to compile support for Intel protocol.
	199
e9a2dd26 MH	200	config BT_HCIUART_BCM
	201	bool "Broadcom protocol support"
	202	depends on BT_HCIUART
33cd149e	203	depends on BT_HCIUART_SERDEV
4294625e	204	depends on (!ACPI \|\| SERIAL_DEV_CTRL_TTYPORT)
a3a446c7	205	depends on GPIOLIB
bdd8818e	206	select BT_HCIUART_H4
3e0ac12a	207	select BT_BCM
e9a2dd26 MH	208	help
	209	The Broadcom protocol support enables Bluetooth HCI over serial
	210	port interface for Broadcom Bluetooth controllers.
	211
	212	Say Y here to compile support for Broadcom protocol.
	213
b9763cdf MH	214	config BT_HCIUART_RTL
	215	bool "Realtek protocol support"
	216	depends on BT_HCIUART
	217	depends on BT_HCIUART_SERDEV
	218	depends on GPIOLIB
848fc616	219	depends on (ACPI \|\| SERIAL_DEV_CTRL_TTYPORT)
b9763cdf MH	220	select BT_HCIUART_3WIRE
	221	select BT_RTL
	222	help
	223	The Realtek protocol support enables Bluetooth HCI over 3-Wire
e22998f5	224	serial port interface for Realtek Bluetooth controllers.
b9763cdf MH	225
	226	Say Y here to compile support for Realtek protocol.
	227
0ff252c1 BYTK	228	config BT_HCIUART_QCA
	229	bool "Qualcomm Atheros protocol support"
	230	depends on BT_HCIUART
05ba533c	231	depends on BT_HCIUART_SERDEV
0ff252c1 BYTK	232	select BT_HCIUART_H4
	233	select BT_QCA
	234	help
	235	The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	236	over serial port interface(H4) between controller and host.
	237	This protocol is required for UART clock control for QCA Bluetooth
	238	devices.
	239
	240	Say Y here to compile support for QCA protocol.
	241
395174bb LP	242	config BT_HCIUART_AG6XX
	243	bool "Intel AG6XX protocol support"
	244	depends on BT_HCIUART
	245	select BT_HCIUART_H4
	246	select BT_INTEL
	247	help
	248	The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	249	port interface for Intel ibt 2.1 Bluetooth controllers.
	250
	251	Say Y here to compile support for Intel AG6XX protocol.
162f812f LP	252
	253	config BT_HCIUART_MRVL
	254	bool "Marvell protocol support"
	255	depends on BT_HCIUART
be70e5e7	256	depends on BT_HCIUART_SERDEV
162f812f LP	257	select BT_HCIUART_H4
	258	help
	259	Marvell is serial protocol for communication between Bluetooth
	260	device and host. This protocol is required for most Marvell Bluetooth
	261	devices with UART interface.
	262
	263	Say Y here to compile support for HCI MRVL protocol.
395174bb	264
1da177e4 LT	265	config BT_HCIBCM203X
	266	tristate "HCI BCM203x USB driver"
	267	depends on USB
	268	select FW_LOADER
	269	help
	270	Bluetooth HCI BCM203x USB driver.
	271	This driver provides the firmware loading mechanism for the Broadcom
	272	Blutonium based devices.
	273
	274	Say Y here to compile support for HCI BCM203x devices into the
	275	kernel or say M to compile it as module (bcm203x).
	276
	277	config BT_HCIBPA10X
	278	tristate "HCI BPA10x USB driver"
07eb96a5	279	depends on USB
1da177e4 LT	280	help
	281	Bluetooth HCI BPA10x USB driver.
	282	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	283	sniffer devices.
	284
	285	Say Y here to compile support for HCI BPA10x devices into the
	286	kernel or say M to compile it as module (bpa10x).
	287
	288	config BT_HCIBFUSB
	289	tristate "HCI BlueFRITZ! USB driver"
	290	depends on USB
	291	select FW_LOADER
	292	help
	293	Bluetooth HCI BlueFRITZ! USB driver.
	294	This driver provides support for Bluetooth USB devices with AVM
	295	interface:
	296	AVM BlueFRITZ! USB
	297
	298	Say Y here to compile support for HCI BFUSB devices into the
	299	kernel or say M to compile it as module (bfusb).
	300
	301	config BT_HCIDTL1
	302	tristate "HCI DTL1 (PC Card) driver"
	303	depends on PCMCIA
	304	help
	305	Bluetooth HCI DTL1 (PC Card) driver.
	306	This driver provides support for Bluetooth PCMCIA devices with
	307	Nokia DTL1 interface:
	308	Nokia Bluetooth Card
	309	Socket Bluetooth CF Card
	310
	311	Say Y here to compile support for HCI DTL1 devices into the
	312	kernel or say M to compile it as module (dtl1_cs).
	313
	314	config BT_HCIBT3C
	315	tristate "HCI BT3C (PC Card) driver"
	316	depends on PCMCIA
	317	select FW_LOADER
	318	help
	319	Bluetooth HCI BT3C (PC Card) driver.
	320	This driver provides support for Bluetooth PCMCIA devices with
	321	3Com BT3C interface:
	322	3Com Bluetooth Card (3CRWB6096)
	323	HP Bluetooth Card
	324
	325	Say Y here to compile support for HCI BT3C devices into the
	326	kernel or say M to compile it as module (bt3c_cs).
	327
	328	config BT_HCIBLUECARD
	329	tristate "HCI BlueCard (PC Card) driver"
	330	depends on PCMCIA
	331	help
	332	Bluetooth HCI BlueCard (PC Card) driver.
	333	This driver provides support for Bluetooth PCMCIA devices with
	334	Anycom BlueCard interface:
	335	Anycom Bluetooth PC Card
	336	Anycom Bluetooth CF Card
	337
	338	Say Y here to compile support for HCI BlueCard devices into the
	339	kernel or say M to compile it as module (bluecard_cs).
	340
1da177e4 LT	341	config BT_HCIVHCI
	342	tristate "HCI VHCI (Virtual HCI device) driver"
	343	help
	344	Bluetooth Virtual HCI device driver.
	345	This driver is required if you want to use HCI Emulation software.
	346
	347	Say Y here to compile support for virtual HCI devices into the
	348	kernel or say M to compile it as module (hci_vhci).
	349
132ff4e5 BZ	350	config BT_MRVL
132ff4e5 BZ	351	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	352	help
	353	The core driver to support Marvell Bluetooth devices.
	354
	355	This driver is required if you want to support
73623340	356	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
132ff4e5 BZ	357
	358	Say Y here to compile Marvell Bluetooth driver
	359	into the kernel or say M to compile it as module.
	360
789221ec BZ	361	config BT_MRVL_SDIO
	362	tristate "Marvell BT-over-SDIO driver"
	363	depends on BT_MRVL && MMC
e7a25f98	364	select FW_LOADER
dc759613	365	select WANT_DEV_COREDUMP
789221ec BZ	366	help
	367	The driver for Marvell Bluetooth chipsets with SDIO interface.
	368
	369	This driver is required if you want to use Marvell Bluetooth
73623340	370	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
2ac654f7	371	chipsets are supported.
789221ec BZ	372
	373	Say Y here to compile support for Marvell BT-over-SDIO driver
	374	into the kernel or say M to compile it as module.
	375
9670d80a VK	376	config BT_ATH3K
	377	tristate "Atheros firmware download driver"
	378	depends on BT_HCIBTUSB
	379	select FW_LOADER
	380	help
	381	Bluetooth firmware download driver.
	382	This driver loads the firmware into the Atheros Bluetooth
	383	chipset.
1da177e4	384
9670d80a VK	385	Say Y here to compile support for "Atheros firmware download driver"
	386	into the kernel or say M to compile it as module (ath3k).
	387
9aebfd4a SW	388	config BT_MTKSDIO
	389	tristate "MediaTek HCI SDIO driver"
	390	depends on MMC
3a722044	391	select BT_MTK
9aebfd4a SW	392	help
	393	MediaTek Bluetooth HCI SDIO driver.
	394	This driver is required if you want to use MediaTek Bluetooth
	395	with SDIO interface.
	396
	397	Say Y here to compile support for MediaTek Bluetooth SDIO devices
	398	into the kernel or say M to compile it as module (btmtksdio).
	399
7237c4c9 SW	400	config BT_MTKUART
	401	tristate "MediaTek HCI UART driver"
	402	depends on SERIAL_DEV_BUS
f5c3f989	403	select BT_MTK
7237c4c9 SW	404	help
	405	MediaTek Bluetooth HCI UART driver.
	406	This driver is required if you want to use MediaTek Bluetooth
	407	with serial interface.
	408
	409	Say Y here to compile support for MediaTek Bluetooth UART devices
	410	into the kernel or say M to compile it as module (btmtkuart).
	411
1511cc75 BA	412	config BT_QCOMSMD
1511cc75 BA	413	tristate "Qualcomm SMD based HCI support"
5052de8d	414	depends on RPMSG \|\| (COMPILE_TEST && RPMSG=n)
6e9e6cc8	415	depends on QCOM_WCNSS_CTRL \|\| (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
1511cc75 BA	416	select BT_QCA
	417	help
	418	Qualcomm SMD based HCI driver.
	419	This driver is used to bridge HCI data onto the shared memory
	420	channels to the WCNSS core.
	421
	422	Say Y here to compile support for HCI over Qualcomm SMD into the
	423	kernel or say M to compile as a module.
	424
38aa4da5	425	config BT_HCIRSI
255dd5b7	426	tristate
38aa4da5 PRG	427	help
	428	Redpine BT driver.
	429	This driver handles BT traffic from upper layers and pass
	430	to the RSI_91x coex module for further scheduling to device
	431
	432	Say Y here to compile support for HCI over Redpine into the
	433	kernel or say M to compile as a module.
	434
afd2daa2 MH	435	config BT_VIRTIO
	436	tristate "Virtio Bluetooth driver"
	437	depends on VIRTIO
	438	help
	439	Virtio Bluetooth support driver.
	440	This driver supports Virtio Bluetooth devices.
	441
	442	Say Y here to compile support for HCI over Virtio into the
	443	kernel or say M to compile as a module.
	444
9670d80a	445	endmenu