[linux-2.6-block.git] / drivers / bluetooth / Kconfig

# SPDX-License-Identifier: GPL-2.0

menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate
	select REGMAP

config BT_BCM
	tristate
	select FW_LOADER

config BT_RTL
	tristate
	select FW_LOADER

config BT_QCA
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_AUTOSUSPEND
	bool "Enable USB autosuspend for Bluetooth USB devices by default"
	depends on BT_HCIBTUSB
	help
	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
	  default.

	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
	  on the kernel commandline.

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTUSB_RTL
	bool "Realtek protocol support"
	depends on BT_HCIBTUSB
	select BT_RTL
	default y
	help
	  The Realtek protocol support enables firmware and configuration
	  download support for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
	depends on NVMEM || !NVMEM
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_SERDEV
	bool
	depends on SERIAL_DEV_BUS && BT_HCIUART
	default y

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_NOKIA
	tristate "UART Nokia H4+ protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on PM
	select BT_HCIUART_H4
	select BT_BCM
	help
	  Nokia H4+ is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for Bluetooth devices
	  with UART interface in Nokia devices.

	  Say Y here to compile support for Nokia's H4+ protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIUART_RTL
	bool "Realtek protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on ACPI
	select BT_HCIUART_3WIRE
	select BT_RTL
	help
	  The Realtek protocol support enables Bluetooth HCI over 3-Wire
	  serial port internface for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIUART_QCA
	bool "Qualcomm Atheros protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	select BT_QCA
	help
	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	  over serial port interface(H4) between controller and host.
	  This protocol is required for UART clock control for QCA Bluetooth
	  devices.

	  Say Y here to compile support for QCA protocol.

config BT_HCIUART_AG6XX
	bool "Intel AG6XX protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	  port interface for Intel ibt 2.1 Bluetooth controllers.

	  Say Y here to compile support for Intel AG6XX protocol.

config BT_HCIUART_MRVL
	bool "Marvell protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  Marvell is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Marvell Bluetooth
	  devices with UART interface.

	  Say Y here to compile support for HCI MRVL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

config BT_MTKUART
	tristate "MediaTek HCI UART driver"
	depends on SERIAL_DEV_BUS
	help
	  MediaTek Bluetooth HCI UART driver.
	  This driver is required if you want to use MediaTek Bluetooth
	  with serial interface.

	  Say Y here to compile support for MediaTek Bluetooth UART devices
	  into the kernel or say M to compile it as module (btmtkuart).

config BT_QCOMSMD
	tristate "Qualcomm SMD based HCI support"
	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
	select BT_QCA
	help
	  Qualcomm SMD based HCI driver.
	  This driver is used to bridge HCI data onto the shared memory
	  channels to the WCNSS core.

	  Say Y here to compile support for HCI over Qualcomm SMD into the
	  kernel or say M to compile as a module.

config BT_HCIRSI
	tristate
	help
	  Redpine BT driver.
	  This driver handles BT traffic from upper layers and pass
	  to the RSI_91x coex module for further scheduling to device

	  Say Y here to compile support for HCI over Redpine into the
	  kernel or say M to compile as a module.

endmenu
Commit	Line	Data
b2441318	1	# SPDX-License-Identifier: GPL-2.0
1da177e4 LT	2
	3	menu "Bluetooth device drivers"
	4	depends on BT
	5
48f0ed1b MH	6	config BT_INTEL
48f0ed1b MH	7	tristate
d06f107b	8	select REGMAP
48f0ed1b	9
4fba30f0 MH	10	config BT_BCM
4fba30f0 MH	11	tristate
1c8ba6d0	12	select FW_LOADER
4fba30f0	13
db33c77d CC	14	config BT_RTL
	15	tristate
	16	select FW_LOADER
	17
83e81961 BYTK	18	config BT_QCA
	19	tristate
	20	select FW_LOADER
	21
5e23b923	22	config BT_HCIBTUSB
9bfa35fe MH	23	tristate "HCI USB driver"
9bfa35fe MH	24	depends on USB
4185a0f5	25	select BT_INTEL
5e23b923 MH	26	help
	27	Bluetooth HCI USB driver.
	28	This driver is required if you want to use Bluetooth devices with
	29	USB interface.
	30
5e23b923 MH	31	Say Y here to compile support for Bluetooth USB devices into the
	32	kernel or say M to compile it as module (btusb).
	33
eff2d68c	34	config BT_HCIBTUSB_AUTOSUSPEND
e7232d18	35	bool "Enable USB autosuspend for Bluetooth USB devices by default"
eff2d68c HG	36	depends on BT_HCIBTUSB
	37	help
	38	Say Y here to enable USB autosuspend for Bluetooth USB devices by
	39	default.
	40
	41	This can be overridden by passing btusb.enable_autosuspend=[y\|n]
	42	on the kernel commandline.
	43
c2bfb100 MH	44	config BT_HCIBTUSB_BCM
	45	bool "Broadcom protocol support"
	46	depends on BT_HCIBTUSB
	47	select BT_BCM
	48	default y
	49	help
	50	The Broadcom protocol support enables firmware and patchram
	51	download support for Broadcom Bluetooth controllers.
	52
	53	Say Y here to compile support for Broadcom protocol.
	54
db33c77d CC	55	config BT_HCIBTUSB_RTL
	56	bool "Realtek protocol support"
	57	depends on BT_HCIBTUSB
	58	select BT_RTL
	59	default y
	60	help
	61	The Realtek protocol support enables firmware and configuration
	62	download support for Realtek Bluetooth controllers.
	63
	64	Say Y here to compile support for Realtek protocol.
	65
ddbaf13e MH	66	config BT_HCIBTSDIO
	67	tristate "HCI SDIO driver"
	68	depends on MMC
	69	help
	70	Bluetooth HCI SDIO driver.
	71	This driver is required if you want to use Bluetooth device with
	72	SDIO interface.
	73
	74	Say Y here to compile support for Bluetooth SDIO devices into the
	75	kernel or say M to compile it as module (btsdio).
	76
1da177e4 LT	77	config BT_HCIUART
1da177e4 LT	78	tristate "HCI UART driver"
05e89fb5	79	depends on SERIAL_DEV_BUS \|\| !SERIAL_DEV_BUS
b71b25fe	80	depends on NVMEM \|\| !NVMEM
4f73bc4d	81	depends on TTY
1da177e4 LT	82	help
	83	Bluetooth HCI UART driver.
	84	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	85	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	86	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	87	adapter and BrainBoxes Bluetooth PC Card.
	88
	89	Say Y here to compile support for Bluetooth UART devices into the
	90	kernel or say M to compile it as module (hci_uart).
	91
1fb78fb6 AB	92	config BT_HCIUART_SERDEV
	93	bool
	94	depends on SERIAL_DEV_BUS && BT_HCIUART
1fb78fb6 AB	95	default y
1fb78fb6 AB	96
1da177e4 LT	97	config BT_HCIUART_H4
	98	bool "UART (H4) protocol support"
	99	depends on BT_HCIUART
	100	help
8ba8b4c0 SG	101	UART (H4) is serial protocol for communication between Bluetooth
	102	device and host. This protocol is required for most Bluetooth devices
	103	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	104
	105	Say Y here to compile support for HCI UART (H4) protocol.
	106
7bb31868 SR	107	config BT_HCIUART_NOKIA
	108	tristate "UART Nokia H4+ protocol support"
	109	depends on BT_HCIUART
1fb78fb6	110	depends on BT_HCIUART_SERDEV
a3a446c7	111	depends on GPIOLIB
7bb31868	112	depends on PM
c42c88e6	113	select BT_HCIUART_H4
6a485420	114	select BT_BCM
7bb31868 SR	115	help
	116	Nokia H4+ is serial protocol for communication between Bluetooth
	117	device and host. This protocol is required for Bluetooth devices
	118	with UART interface in Nokia devices.
	119
	120	Say Y here to compile support for Nokia's H4+ protocol.
	121
1da177e4 LT	122	config BT_HCIUART_BCSP
	123	bool "BCSP protocol support"
	124	depends on BT_HCIUART
d3a8eab0	125	select BITREVERSE
1da177e4	126	help
8ba8b4c0	127	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	128	between Bluetooth device and host. This protocol is required for non
	129	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	130	CF cards.
	131
	132	Say Y here to compile support for HCI BCSP protocol.
	133
b3190df6 SS	134	config BT_HCIUART_ATH3K
	135	bool "Atheros AR300x serial support"
	136	depends on BT_HCIUART
d90aa682	137	select BT_HCIUART_H4
b3190df6 SS	138	help
	139	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	140	communication between host and Atheros AR300x Bluetooth devices.
	141	This protocol enables AR300x chips to be enabled with
	142	power management support.
	143	Enable this if you have Atheros AR300x serial Bluetooth device.
	144
	145	Say Y here to compile support for HCI UART ATH3K protocol.
	146
166d2f6a OBC	147	config BT_HCIUART_LL
166d2f6a OBC	148	bool "HCILL protocol support"
76c4969f	149	depends on BT_HCIUART_SERDEV
f9d7c8fd	150	select BT_HCIUART_H4
166d2f6a OBC	151	help
	152	HCILL (HCI Low Level) is a serial protocol for communication
	153	between Bluetooth device and host. This protocol is required for
	154	serial Bluetooth devices that are based on Texas Instruments'
	155	BRF chips.
	156
	157	Say Y here to compile support for HCILL protocol.
	158
7dec65c8 JH	159	config BT_HCIUART_3WIRE
	160	bool "Three-wire UART (H5) protocol support"
	161	depends on BT_HCIUART
6c3711ec	162	depends on BT_HCIUART_SERDEV
7dec65c8 JH	163	help
	164	The HCI Three-wire UART Transport Layer makes it possible to
	165	user the Bluetooth HCI over a serial port interface. The HCI
	166	Three-wire UART Transport Layer assumes that the UART
	167	communication may have bit errors, overrun errors or burst
	168	errors and thereby making CTS/RTS lines unnecessary.
	169
	170	Say Y here to compile support for Three-wire UART protocol.
	171
16e3887f MH	172	config BT_HCIUART_INTEL
	173	bool "Intel protocol support"
	174	depends on BT_HCIUART
a3a446c7	175	depends on GPIOLIB
ca93cee5	176	select BT_HCIUART_H4
bca03c95	177	select BT_INTEL
16e3887f MH	178	help
	179	The Intel protocol support enables Bluetooth HCI over serial
	180	port interface for Intel Bluetooth controllers.
	181
	182	Say Y here to compile support for Intel protocol.
	183
e9a2dd26 MH	184	config BT_HCIUART_BCM
	185	bool "Broadcom protocol support"
	186	depends on BT_HCIUART
33cd149e	187	depends on BT_HCIUART_SERDEV
4294625e	188	depends on (!ACPI \|\| SERIAL_DEV_CTRL_TTYPORT)
a3a446c7	189	depends on GPIOLIB
bdd8818e	190	select BT_HCIUART_H4
3e0ac12a	191	select BT_BCM
e9a2dd26 MH	192	help
	193	The Broadcom protocol support enables Bluetooth HCI over serial
	194	port interface for Broadcom Bluetooth controllers.
	195
	196	Say Y here to compile support for Broadcom protocol.
	197
b9763cdf MH	198	config BT_HCIUART_RTL
	199	bool "Realtek protocol support"
	200	depends on BT_HCIUART
	201	depends on BT_HCIUART_SERDEV
	202	depends on GPIOLIB
51474eff	203	depends on ACPI
b9763cdf MH	204	select BT_HCIUART_3WIRE
	205	select BT_RTL
	206	help
	207	The Realtek protocol support enables Bluetooth HCI over 3-Wire
	208	serial port internface for Realtek Bluetooth controllers.
	209
	210	Say Y here to compile support for Realtek protocol.
	211
0ff252c1 BYTK	212	config BT_HCIUART_QCA
	213	bool "Qualcomm Atheros protocol support"
	214	depends on BT_HCIUART
05ba533c	215	depends on BT_HCIUART_SERDEV
0ff252c1 BYTK	216	select BT_HCIUART_H4
	217	select BT_QCA
	218	help
	219	The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	220	over serial port interface(H4) between controller and host.
	221	This protocol is required for UART clock control for QCA Bluetooth
	222	devices.
	223
	224	Say Y here to compile support for QCA protocol.
	225
395174bb LP	226	config BT_HCIUART_AG6XX
	227	bool "Intel AG6XX protocol support"
	228	depends on BT_HCIUART
	229	select BT_HCIUART_H4
	230	select BT_INTEL
	231	help
	232	The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	233	port interface for Intel ibt 2.1 Bluetooth controllers.
	234
	235	Say Y here to compile support for Intel AG6XX protocol.
162f812f LP	236
	237	config BT_HCIUART_MRVL
	238	bool "Marvell protocol support"
	239	depends on BT_HCIUART
	240	select BT_HCIUART_H4
	241	help
	242	Marvell is serial protocol for communication between Bluetooth
	243	device and host. This protocol is required for most Marvell Bluetooth
	244	devices with UART interface.
	245
	246	Say Y here to compile support for HCI MRVL protocol.
395174bb	247
1da177e4 LT	248	config BT_HCIBCM203X
	249	tristate "HCI BCM203x USB driver"
	250	depends on USB
	251	select FW_LOADER
	252	help
	253	Bluetooth HCI BCM203x USB driver.
	254	This driver provides the firmware loading mechanism for the Broadcom
	255	Blutonium based devices.
	256
	257	Say Y here to compile support for HCI BCM203x devices into the
	258	kernel or say M to compile it as module (bcm203x).
	259
	260	config BT_HCIBPA10X
	261	tristate "HCI BPA10x USB driver"
07eb96a5	262	depends on USB
1da177e4 LT	263	help
	264	Bluetooth HCI BPA10x USB driver.
	265	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	266	sniffer devices.
	267
	268	Say Y here to compile support for HCI BPA10x devices into the
	269	kernel or say M to compile it as module (bpa10x).
	270
	271	config BT_HCIBFUSB
	272	tristate "HCI BlueFRITZ! USB driver"
	273	depends on USB
	274	select FW_LOADER
	275	help
	276	Bluetooth HCI BlueFRITZ! USB driver.
	277	This driver provides support for Bluetooth USB devices with AVM
	278	interface:
	279	AVM BlueFRITZ! USB
	280
	281	Say Y here to compile support for HCI BFUSB devices into the
	282	kernel or say M to compile it as module (bfusb).
	283
	284	config BT_HCIDTL1
	285	tristate "HCI DTL1 (PC Card) driver"
	286	depends on PCMCIA
	287	help
	288	Bluetooth HCI DTL1 (PC Card) driver.
	289	This driver provides support for Bluetooth PCMCIA devices with
	290	Nokia DTL1 interface:
	291	Nokia Bluetooth Card
	292	Socket Bluetooth CF Card
	293
	294	Say Y here to compile support for HCI DTL1 devices into the
	295	kernel or say M to compile it as module (dtl1_cs).
	296
	297	config BT_HCIBT3C
	298	tristate "HCI BT3C (PC Card) driver"
	299	depends on PCMCIA
	300	select FW_LOADER
	301	help
	302	Bluetooth HCI BT3C (PC Card) driver.
	303	This driver provides support for Bluetooth PCMCIA devices with
	304	3Com BT3C interface:
	305	3Com Bluetooth Card (3CRWB6096)
	306	HP Bluetooth Card
	307
	308	Say Y here to compile support for HCI BT3C devices into the
	309	kernel or say M to compile it as module (bt3c_cs).
	310
	311	config BT_HCIBLUECARD
	312	tristate "HCI BlueCard (PC Card) driver"
	313	depends on PCMCIA
	314	help
	315	Bluetooth HCI BlueCard (PC Card) driver.
	316	This driver provides support for Bluetooth PCMCIA devices with
	317	Anycom BlueCard interface:
	318	Anycom Bluetooth PC Card
	319	Anycom Bluetooth CF Card
	320
	321	Say Y here to compile support for HCI BlueCard devices into the
	322	kernel or say M to compile it as module (bluecard_cs).
	323
1da177e4 LT	324	config BT_HCIVHCI
	325	tristate "HCI VHCI (Virtual HCI device) driver"
	326	help
	327	Bluetooth Virtual HCI device driver.
	328	This driver is required if you want to use HCI Emulation software.
	329
	330	Say Y here to compile support for virtual HCI devices into the
	331	kernel or say M to compile it as module (hci_vhci).
	332
132ff4e5 BZ	333	config BT_MRVL
132ff4e5 BZ	334	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	335	help
	336	The core driver to support Marvell Bluetooth devices.
	337
	338	This driver is required if you want to support
8c57983b	339	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
132ff4e5 BZ	340
	341	Say Y here to compile Marvell Bluetooth driver
	342	into the kernel or say M to compile it as module.
	343
789221ec BZ	344	config BT_MRVL_SDIO
	345	tristate "Marvell BT-over-SDIO driver"
	346	depends on BT_MRVL && MMC
e7a25f98	347	select FW_LOADER
dc759613	348	select WANT_DEV_COREDUMP
789221ec BZ	349	help
	350	The driver for Marvell Bluetooth chipsets with SDIO interface.
	351
	352	This driver is required if you want to use Marvell Bluetooth
8c57983b	353	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
2ac654f7	354	chipsets are supported.
789221ec BZ	355
	356	Say Y here to compile support for Marvell BT-over-SDIO driver
	357	into the kernel or say M to compile it as module.
	358
9670d80a VK	359	config BT_ATH3K
	360	tristate "Atheros firmware download driver"
	361	depends on BT_HCIBTUSB
	362	select FW_LOADER
	363	help
	364	Bluetooth firmware download driver.
	365	This driver loads the firmware into the Atheros Bluetooth
	366	chipset.
1da177e4	367
9670d80a VK	368	Say Y here to compile support for "Atheros firmware download driver"
	369	into the kernel or say M to compile it as module (ath3k).
	370
363907af PS	371	config BT_WILINK
	372	tristate "Texas Instruments WiLink7 driver"
	373	depends on TI_ST
	374	help
	375	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	376	combo devices. This makes use of shared transport line discipline
	377	core driver to communicate with the BT core of the combo chip.
	378
	379	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	380	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	381
7237c4c9 SW	382	config BT_MTKUART
	383	tristate "MediaTek HCI UART driver"
	384	depends on SERIAL_DEV_BUS
	385	help
	386	MediaTek Bluetooth HCI UART driver.
	387	This driver is required if you want to use MediaTek Bluetooth
	388	with serial interface.
	389
	390	Say Y here to compile support for MediaTek Bluetooth UART devices
	391	into the kernel or say M to compile it as module (btmtkuart).
	392
1511cc75 BA	393	config BT_QCOMSMD
1511cc75 BA	394	tristate "Qualcomm SMD based HCI support"
5052de8d	395	depends on RPMSG \|\| (COMPILE_TEST && RPMSG=n)
6e9e6cc8	396	depends on QCOM_WCNSS_CTRL \|\| (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
1511cc75 BA	397	select BT_QCA
	398	help
	399	Qualcomm SMD based HCI driver.
	400	This driver is used to bridge HCI data onto the shared memory
	401	channels to the WCNSS core.
	402
	403	Say Y here to compile support for HCI over Qualcomm SMD into the
	404	kernel or say M to compile as a module.
	405
38aa4da5	406	config BT_HCIRSI
255dd5b7	407	tristate
38aa4da5 PRG	408	help
	409	Redpine BT driver.
	410	This driver handles BT traffic from upper layers and pass
	411	to the RSI_91x coex module for further scheduling to device
	412
	413	Say Y here to compile support for HCI over Redpine into the
	414	kernel or say M to compile as a module.
	415
9670d80a	416	endmenu