[linux-2.6-block.git] / drivers / block / paride / Kconfig

# SPDX-License-Identifier: GPL-2.0
#
# PARIDE configuration
#
# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
# PARIDE must also be a module.
# PARIDE only supports PC style parports. Tough for USB or other parports...

comment "Parallel IDE high-level drivers"
	depends on PARIDE

config PARIDE_PD
	tristate "Parallel port IDE disks"
	depends on PARIDE
	help
	  This option enables the high-level driver for IDE-type disk devices
	  connected through a parallel port. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  parallel port IDE driver, otherwise you should answer M to build
	  it as a loadable module. The module will be called pd. You
	  must also have at least one parallel port protocol driver in your
	  system. Among the devices supported by this driver are the SyQuest
	  EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
	  hard drives from MicroSolutions.

config PARIDE_PCD
	tristate "Parallel port ATAPI CD-ROMs"
	depends on PARIDE
	select CDROM
	select BLK_SCSI_REQUEST # only for the generic cdrom code
	---help---
	  This option enables the high-level driver for ATAPI CD-ROM devices
	  connected through a parallel port. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  parallel port ATAPI CD-ROM driver, otherwise you should answer M to
	  build it as a loadable module. The module will be called pcd. You
	  must also have at least one parallel port protocol driver in your
	  system. Among the devices supported by this driver are the
	  MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
	  you have such a CD-ROM drive, you should also say Y or M to "ISO
	  9660 CD-ROM file system support" below, because that's the file
	  system used on CD-ROMs.

config PARIDE_PF
	tristate "Parallel port ATAPI disks"
	depends on PARIDE
	help
	  This option enables the high-level driver for ATAPI disk devices
	  connected through a parallel port. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  parallel port ATAPI disk driver, otherwise you should answer M
	  to build it as a loadable module. The module will be called pf.
	  You must also have at least one parallel port protocol driver in
	  your system. Among the devices supported by this driver are the
	  MicroSolutions backpack PD/CD drive and the Imation Superdisk
	  LS-120 drive.

config PARIDE_PT
	tristate "Parallel port ATAPI tapes"
	depends on PARIDE
	help
	  This option enables the high-level driver for ATAPI tape devices
	  connected through a parallel port. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  parallel port ATAPI disk driver, otherwise you should answer M
	  to build it as a loadable module. The module will be called pt.
	  You must also have at least one parallel port protocol driver in
	  your system. Among the devices supported by this driver is the
	  parallel port version of the HP 5GB drive.

config PARIDE_PG
	tristate "Parallel port generic ATAPI devices"
	depends on PARIDE
	---help---
	  This option enables a special high-level driver for generic ATAPI
	  devices connected through a parallel port. The driver allows user
	  programs, such as cdrtools, to send ATAPI commands directly to a
	  device.

	  If you chose to build PARIDE support into your kernel, you may
	  answer Y here to build in the parallel port generic ATAPI driver,
	  otherwise you should answer M to build it as a loadable module. The
	  module will be called pg.

	  You must also have at least one parallel port protocol driver in
	  your system.

	  This driver implements an API loosely related to the generic SCSI
	  driver. See <file:include/linux/pg.h>. for details.

	  You can obtain the most recent version of cdrtools from
	  <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
	  later fully support this driver.

comment "Parallel IDE protocol modules"
	depends on PARIDE

config PARIDE_ATEN
	tristate "ATEN EH-100 protocol"
	depends on PARIDE
	help
	  This option enables support for the ATEN EH-100 parallel port IDE
	  protocol. This protocol is used in some inexpensive low performance
	  parallel port kits made in Hong Kong. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  protocol driver, otherwise you should answer M to build it as a
	  loadable module. The module will be called aten. You must also
	  have a high-level driver for the type of device that you want to
	  support.

config PARIDE_BPCK
	tristate "MicroSolutions backpack (Series 5) protocol"
	depends on PARIDE
	---help---
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
	  before 1999 were Series 5) Series 5 drives will NOT always have the
	  Series noted on the bottom of the drive. Series 6 drivers will.

	  In other words, if your BACKPACK drive doesn't say "Series 6" on the
	  bottom, enable this option.

	  If you chose to build PARIDE support into your kernel, you may
	  answer Y here to build in the protocol driver, otherwise you should
	  answer M to build it as a loadable module.  The module will be
	  called bpck.  You must also have a high-level driver for the type
	  of device that you want to support.

config PARIDE_BPCK6
	tristate "MicroSolutions backpack (Series 6) protocol"
	depends on PARIDE && !64BIT
	---help---
	  This option enables support for the Micro Solutions BACKPACK
	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
	  after 1999 were Series 6) Series 6 drives will have the Series noted
	  on the bottom of the drive.  Series 5 drivers don't always have it
	  noted.

	  In other words, if your BACKPACK drive says "Series 6" on the
	  bottom, enable this option.

	  If you chose to build PARIDE support into your kernel, you may
	  answer Y here to build in the protocol driver, otherwise you should
	  answer M to build it as a loadable module.  The module will be
	  called bpck6.  You must also have a high-level driver for the type
	  of device that you want to support.

config PARIDE_COMM
	tristate "DataStor Commuter protocol"
	depends on PARIDE
	help
	  This option enables support for the Commuter parallel port IDE
	  protocol from DataStor. If you chose to build PARIDE support
	  into your kernel, you may answer Y here to build in the protocol
	  driver, otherwise you should answer M to build it as a loadable
	  module. The module will be called comm. You must also have
	  a high-level driver for the type of device that you want to support.

config PARIDE_DSTR
	tristate "DataStor EP-2000 protocol"
	depends on PARIDE
	help
	  This option enables support for the EP-2000 parallel port IDE
	  protocol from DataStor. If you chose to build PARIDE support
	  into your kernel, you may answer Y here to build in the protocol
	  driver, otherwise you should answer M to build it as a loadable
	  module. The module will be called dstr. You must also have
	  a high-level driver for the type of device that you want to support.

config PARIDE_FIT2
	tristate "FIT TD-2000 protocol"
	depends on PARIDE
	help
	  This option enables support for the TD-2000 parallel port IDE
	  protocol from Fidelity International Technology. This is a simple
	  (low speed) adapter that is used in some portable hard drives. If
	  you chose to build PARIDE support into your kernel, you may answer Y
	  here to build in the protocol driver, otherwise you should answer M
	  to build it as a loadable module. The module will be called ktti.
	  You must also have a high-level driver for the type of device that
	  you want to support.

config PARIDE_FIT3
	tristate "FIT TD-3000 protocol"
	depends on PARIDE
	help
	  This option enables support for the TD-3000 parallel port IDE
	  protocol from Fidelity International Technology. This protocol is
	  used in newer models of their portable disk, CD-ROM and PD/CD
	  devices. If you chose to build PARIDE support into your kernel, you
	  may answer Y here to build in the protocol driver, otherwise you
	  should answer M to build it as a loadable module. The module will be
	  called fit3. You must also have a high-level driver for the type
	  of device that you want to support.

config PARIDE_EPAT
	tristate "Shuttle EPAT/EPEZ protocol"
	depends on PARIDE
	help
	  This option enables support for the EPAT parallel port IDE protocol.
	  EPAT is a parallel port IDE adapter manufactured by Shuttle
	  Technology and widely used in devices from major vendors such as
	  Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
	  PARIDE support into your kernel, you may answer Y here to build in
	  the protocol driver, otherwise you should answer M to build it as a
	  loadable module. The module will be called epat. You must also
	  have a high-level driver for the type of device that you want to
	  support.

config PARIDE_EPATC8
	bool "Support c7/c8 chips"
	depends on PARIDE_EPAT
	help
	  This option enables support for the newer Shuttle EP1284 (aka c7 and
	  c8) chip. You need this if you are using any recent Imation SuperDisk
	  (LS-120) drive.

config PARIDE_EPIA
	tristate "Shuttle EPIA protocol"
	depends on PARIDE
	help
	  This option enables support for the (obsolete) EPIA parallel port
	  IDE protocol from Shuttle Technology. This adapter can still be
	  found in some no-name kits. If you chose to build PARIDE support
	  into your kernel, you may answer Y here to build in the protocol
	  driver, otherwise you should answer M to build it as a loadable
	  module. The module will be called epia. You must also have a
	  high-level driver for the type of device that you want to support.

config PARIDE_FRIQ
	tristate "Freecom IQ ASIC-2 protocol"
	depends on PARIDE
	help
	  This option enables support for version 2 of the Freecom IQ parallel
	  port IDE adapter.  This adapter is used by the Maxell Superdisk
	  drive.  If you chose to build PARIDE support into your kernel, you
	  may answer Y here to build in the protocol driver, otherwise you
	  should answer M to build it as a loadable module. The module will be
	  called friq. You must also have a high-level driver for the type
	  of device that you want to support.

config PARIDE_FRPW
	tristate "FreeCom power protocol"
	depends on PARIDE
	help
	  This option enables support for the Freecom power parallel port IDE
	  protocol. If you chose to build PARIDE support into your kernel, you
	  may answer Y here to build in the protocol driver, otherwise you
	  should answer M to build it as a loadable module. The module will be
	  called frpw. You must also have a high-level driver for the type
	  of device that you want to support.

config PARIDE_KBIC
	tristate "KingByte KBIC-951A/971A protocols"
	depends on PARIDE
	help
	  This option enables support for the KBIC-951A and KBIC-971A parallel
	  port IDE protocols from KingByte Information Corp. KingByte's
	  adapters appear in many no-name portable disk and CD-ROM products,
	  especially in Europe. If you chose to build PARIDE support into your
	  kernel, you may answer Y here to build in the protocol driver,
	  otherwise you should answer M to build it as a loadable module. The
	  module will be called kbic. You must also have a high-level driver
	  for the type of device that you want to support.

config PARIDE_KTTI
	tristate "KT PHd protocol"
	depends on PARIDE
	help
	  This option enables support for the "PHd" parallel port IDE protocol
	  from KT Technology. This is a simple (low speed) adapter that is
	  used in some 2.5" portable hard drives. If you chose to build PARIDE
	  support into your kernel, you may answer Y here to build in the
	  protocol driver, otherwise you should answer M to build it as a
	  loadable module. The module will be called ktti. You must also
	  have a high-level driver for the type of device that you want to
	  support.

config PARIDE_ON20
	tristate "OnSpec 90c20 protocol"
	depends on PARIDE
	help
	  This option enables support for the (obsolete) 90c20 parallel port
	  IDE protocol from OnSpec (often marketed under the ValuStore brand
	  name). If you chose to build PARIDE support into your kernel, you
	  may answer Y here to build in the protocol driver, otherwise you
	  should answer M to build it as a loadable module. The module will
	  be called on20. You must also have a high-level driver for the
	  type of device that you want to support.

config PARIDE_ON26
	tristate "OnSpec 90c26 protocol"
	depends on PARIDE
	help
	  This option enables support for the 90c26 parallel port IDE protocol
	  from OnSpec Electronics (often marketed under the ValuStore brand
	  name). If you chose to build PARIDE support into your kernel, you
	  may answer Y here to build in the protocol driver, otherwise you
	  should answer M to build it as a loadable module. The module will be
	  called on26. You must also have a high-level driver for the type
	  of device that you want to support.

#
Commit	Line	Data
b2441318	1	# SPDX-License-Identifier: GPL-2.0
1da177e4 LT	2	#
	3	# PARIDE configuration
	4	#
	5	# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
482a579b	6	# PARIDE must also be a module.
6a19b41b	7	# PARIDE only supports PC style parports. Tough for USB or other parports...
1da177e4 LT	8
	9	comment "Parallel IDE high-level drivers"
	10	depends on PARIDE
	11
	12	config PARIDE_PD
	13	tristate "Parallel port IDE disks"
	14	depends on PARIDE
	15	help
	16	This option enables the high-level driver for IDE-type disk devices
	17	connected through a parallel port. If you chose to build PARIDE
	18	support into your kernel, you may answer Y here to build in the
	19	parallel port IDE driver, otherwise you should answer M to build
	20	it as a loadable module. The module will be called pd. You
	21	must also have at least one parallel port protocol driver in your
	22	system. Among the devices supported by this driver are the SyQuest
	23	EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
	24	hard drives from MicroSolutions.
	25
	26	config PARIDE_PCD
	27	tristate "Parallel port ATAPI CD-ROMs"
	28	depends on PARIDE
2a750166	29	select CDROM
72148aec	30	select BLK_SCSI_REQUEST # only for the generic cdrom code
1da177e4 LT	31	---help---
	32	This option enables the high-level driver for ATAPI CD-ROM devices
	33	connected through a parallel port. If you chose to build PARIDE
	34	support into your kernel, you may answer Y here to build in the
	35	parallel port ATAPI CD-ROM driver, otherwise you should answer M to
	36	build it as a loadable module. The module will be called pcd. You
	37	must also have at least one parallel port protocol driver in your
	38	system. Among the devices supported by this driver are the
	39	MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
	40	you have such a CD-ROM drive, you should also say Y or M to "ISO
	41	9660 CD-ROM file system support" below, because that's the file
	42	system used on CD-ROMs.
	43
	44	config PARIDE_PF
	45	tristate "Parallel port ATAPI disks"
	46	depends on PARIDE
	47	help
	48	This option enables the high-level driver for ATAPI disk devices
	49	connected through a parallel port. If you chose to build PARIDE
	50	support into your kernel, you may answer Y here to build in the
	51	parallel port ATAPI disk driver, otherwise you should answer M
	52	to build it as a loadable module. The module will be called pf.
	53	You must also have at least one parallel port protocol driver in
	54	your system. Among the devices supported by this driver are the
	55	MicroSolutions backpack PD/CD drive and the Imation Superdisk
	56	LS-120 drive.
	57
	58	config PARIDE_PT
	59	tristate "Parallel port ATAPI tapes"
	60	depends on PARIDE
	61	help
	62	This option enables the high-level driver for ATAPI tape devices
	63	connected through a parallel port. If you chose to build PARIDE
	64	support into your kernel, you may answer Y here to build in the
	65	parallel port ATAPI disk driver, otherwise you should answer M
	66	to build it as a loadable module. The module will be called pt.
	67	You must also have at least one parallel port protocol driver in
	68	your system. Among the devices supported by this driver is the
	69	parallel port version of the HP 5GB drive.
	70
	71	config PARIDE_PG
	72	tristate "Parallel port generic ATAPI devices"
	73	depends on PARIDE
	74	---help---
	75	This option enables a special high-level driver for generic ATAPI
	76	devices connected through a parallel port. The driver allows user
	77	programs, such as cdrtools, to send ATAPI commands directly to a
	78	device.
	79
	80	If you chose to build PARIDE support into your kernel, you may
	81	answer Y here to build in the parallel port generic ATAPI driver,
	82	otherwise you should answer M to build it as a loadable module. The
	83	module will be called pg.
	84
	85	You must also have at least one parallel port protocol driver in
	86	your system.
	87
	88	This driver implements an API loosely related to the generic SCSI
	89	driver. See <file:include/linux/pg.h>. for details.
	90
	91	You can obtain the most recent version of cdrtools from
	92	<ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
	93	later fully support this driver.
	94
95	comment "Parallel IDE protocol modules"
96	depends on PARIDE
97
98	config PARIDE_ATEN
99	tristate "ATEN EH-100 protocol"
100	depends on PARIDE
101	help
102	This option enables support for the ATEN EH-100 parallel port IDE
103	protocol. This protocol is used in some inexpensive low performance
104	parallel port kits made in Hong Kong. If you chose to build PARIDE
105	support into your kernel, you may answer Y here to build in the
106	protocol driver, otherwise you should answer M to build it as a
107	loadable module. The module will be called aten. You must also
108	have a high-level driver for the type of device that you want to
109	support.
110
111	config PARIDE_BPCK
112	tristate "MicroSolutions backpack (Series 5) protocol"
113	depends on PARIDE
114	---help---
115	This option enables support for the Micro Solutions BACKPACK
116	parallel port Series 5 IDE protocol. (Most BACKPACK drives made
117	before 1999 were Series 5) Series 5 drives will NOT always have the
118	Series noted on the bottom of the drive. Series 6 drivers will.
119
120	In other words, if your BACKPACK drive doesn't say "Series 6" on the
121	bottom, enable this option.
122
123	If you chose to build PARIDE support into your kernel, you may
124	answer Y here to build in the protocol driver, otherwise you should
125	answer M to build it as a loadable module. The module will be
126	called bpck. You must also have a high-level driver for the type
127	of device that you want to support.
128
129	config PARIDE_BPCK6
130	tristate "MicroSolutions backpack (Series 6) protocol"
131	depends on PARIDE && !64BIT
132	---help---
133	This option enables support for the Micro Solutions BACKPACK
134	parallel port Series 6 IDE protocol. (Most BACKPACK drives made
135	after 1999 were Series 6) Series 6 drives will have the Series noted
136	on the bottom of the drive. Series 5 drivers don't always have it
137	noted.
138
139	In other words, if your BACKPACK drive says "Series 6" on the
140	bottom, enable this option.
141
142	If you chose to build PARIDE support into your kernel, you may
143	answer Y here to build in the protocol driver, otherwise you should
144	answer M to build it as a loadable module. The module will be
145	called bpck6. You must also have a high-level driver for the type
146	of device that you want to support.
147
148	config PARIDE_COMM
149	tristate "DataStor Commuter protocol"
150	depends on PARIDE
151	help
152	This option enables support for the Commuter parallel port IDE
153	protocol from DataStor. If you chose to build PARIDE support
154	into your kernel, you may answer Y here to build in the protocol
155	driver, otherwise you should answer M to build it as a loadable
156	module. The module will be called comm. You must also have
157	a high-level driver for the type of device that you want to support.
158
159	config PARIDE_DSTR
160	tristate "DataStor EP-2000 protocol"
161	depends on PARIDE
162	help
163	This option enables support for the EP-2000 parallel port IDE
164	protocol from DataStor. If you chose to build PARIDE support
165	into your kernel, you may answer Y here to build in the protocol
166	driver, otherwise you should answer M to build it as a loadable
167	module. The module will be called dstr. You must also have
168	a high-level driver for the type of device that you want to support.
169
170	config PARIDE_FIT2
171	tristate "FIT TD-2000 protocol"
172	depends on PARIDE
173	help
174	This option enables support for the TD-2000 parallel port IDE
175	protocol from Fidelity International Technology. This is a simple
176	(low speed) adapter that is used in some portable hard drives. If
177	you chose to build PARIDE support into your kernel, you may answer Y
178	here to build in the protocol driver, otherwise you should answer M
179	to build it as a loadable module. The module will be called ktti.
180	You must also have a high-level driver for the type of device that
181	you want to support.
182
183	config PARIDE_FIT3
184	tristate "FIT TD-3000 protocol"
185	depends on PARIDE
186	help
187	This option enables support for the TD-3000 parallel port IDE
188	protocol from Fidelity International Technology. This protocol is
189	used in newer models of their portable disk, CD-ROM and PD/CD
190	devices. If you chose to build PARIDE support into your kernel, you
191	may answer Y here to build in the protocol driver, otherwise you
192	should answer M to build it as a loadable module. The module will be
193	called fit3. You must also have a high-level driver for the type
194	of device that you want to support.
195
196	config PARIDE_EPAT
197	tristate "Shuttle EPAT/EPEZ protocol"
198	depends on PARIDE
199	help
200	This option enables support for the EPAT parallel port IDE protocol.
201	EPAT is a parallel port IDE adapter manufactured by Shuttle
202	Technology and widely used in devices from major vendors such as
203	Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
204	PARIDE support into your kernel, you may answer Y here to build in
205	the protocol driver, otherwise you should answer M to build it as a
206	loadable module. The module will be called epat. You must also
207	have a high-level driver for the type of device that you want to
208	support.
209
210	config PARIDE_EPATC8
0cb3d9c6 KC	211	bool "Support c7/c8 chips"
0cb3d9c6 KC	212	depends on PARIDE_EPAT
1da177e4 LT	213	help
	214	This option enables support for the newer Shuttle EP1284 (aka c7 and
	215	c8) chip. You need this if you are using any recent Imation SuperDisk
	216	(LS-120) drive.
	217
	218	config PARIDE_EPIA
	219	tristate "Shuttle EPIA protocol"
	220	depends on PARIDE
	221	help
	222	This option enables support for the (obsolete) EPIA parallel port
	223	IDE protocol from Shuttle Technology. This adapter can still be
	224	found in some no-name kits. If you chose to build PARIDE support
	225	into your kernel, you may answer Y here to build in the protocol
	226	driver, otherwise you should answer M to build it as a loadable
	227	module. The module will be called epia. You must also have a
	228	high-level driver for the type of device that you want to support.
	229
	230	config PARIDE_FRIQ
	231	tristate "Freecom IQ ASIC-2 protocol"
	232	depends on PARIDE
	233	help
	234	This option enables support for version 2 of the Freecom IQ parallel
	235	port IDE adapter. This adapter is used by the Maxell Superdisk
	236	drive. If you chose to build PARIDE support into your kernel, you
	237	may answer Y here to build in the protocol driver, otherwise you
	238	should answer M to build it as a loadable module. The module will be
	239	called friq. You must also have a high-level driver for the type
	240	of device that you want to support.
	241
	242	config PARIDE_FRPW
	243	tristate "FreeCom power protocol"
	244	depends on PARIDE
	245	help
	246	This option enables support for the Freecom power parallel port IDE
	247	protocol. If you chose to build PARIDE support into your kernel, you
	248	may answer Y here to build in the protocol driver, otherwise you
	249	should answer M to build it as a loadable module. The module will be
	250	called frpw. You must also have a high-level driver for the type
	251	of device that you want to support.
	252
	253	config PARIDE_KBIC
	254	tristate "KingByte KBIC-951A/971A protocols"
	255	depends on PARIDE
	256	help
	257	This option enables support for the KBIC-951A and KBIC-971A parallel
	258	port IDE protocols from KingByte Information Corp. KingByte's
	259	adapters appear in many no-name portable disk and CD-ROM products,
	260	especially in Europe. If you chose to build PARIDE support into your
	261	kernel, you may answer Y here to build in the protocol driver,
	262	otherwise you should answer M to build it as a loadable module. The
	263	module will be called kbic. You must also have a high-level driver
	264	for the type of device that you want to support.
	265
	266	config PARIDE_KTTI
	267	tristate "KT PHd protocol"
	268	depends on PARIDE
	269	help
	270	This option enables support for the "PHd" parallel port IDE protocol
	271	from KT Technology. This is a simple (low speed) adapter that is
	272	used in some 2.5" portable hard drives. If you chose to build PARIDE
	273	support into your kernel, you may answer Y here to build in the
	274	protocol driver, otherwise you should answer M to build it as a
	275	loadable module. The module will be called ktti. You must also
	276	have a high-level driver for the type of device that you want to
277	support.
278
279	config PARIDE_ON20
280	tristate "OnSpec 90c20 protocol"
281	depends on PARIDE
282	help
283	This option enables support for the (obsolete) 90c20 parallel port
284	IDE protocol from OnSpec (often marketed under the ValuStore brand
285	name). If you chose to build PARIDE support into your kernel, you
286	may answer Y here to build in the protocol driver, otherwise you
287	should answer M to build it as a loadable module. The module will
288	be called on20. You must also have a high-level driver for the
289	type of device that you want to support.
290
291	config PARIDE_ON26
292	tristate "OnSpec 90c26 protocol"
293	depends on PARIDE
294	help
295	This option enables support for the 90c26 parallel port IDE protocol
296	from OnSpec Electronics (often marketed under the ValuStore brand
297	name). If you chose to build PARIDE support into your kernel, you
298	may answer Y here to build in the protocol driver, otherwise you
299	should answer M to build it as a loadable module. The module will be
300	called on26. You must also have a high-level driver for the type
301	of device that you want to support.
302
303	#