Commit | Line | Data |
---|---|---|
09c434b8 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
1da177e4 LT |
2 | /* |
3 | * drivers/block/ataflop.c | |
4 | * | |
5 | * Copyright (C) 1993 Greg Harp | |
6 | * Atari Support by Bjoern Brauel, Roman Hodek | |
7 | * | |
8 | * Big cleanup Sep 11..14 1994 Roman Hodek: | |
9 | * - Driver now works interrupt driven | |
10 | * - Support for two drives; should work, but I cannot test that :-( | |
11 | * - Reading is done in whole tracks and buffered to speed up things | |
12 | * - Disk change detection and drive deselecting after motor-off | |
13 | * similar to TOS | |
14 | * - Autodetection of disk format (DD/HD); untested yet, because I | |
15 | * don't have an HD drive :-( | |
16 | * | |
17 | * Fixes Nov 13 1994 Martin Schaller: | |
18 | * - Autodetection works now | |
19 | * - Support for 5 1/4'' disks | |
20 | * - Removed drive type (unknown on atari) | |
21 | * - Do seeks with 8 Mhz | |
22 | * | |
23 | * Changes by Andreas Schwab: | |
24 | * - After errors in multiple read mode try again reading single sectors | |
25 | * (Feb 1995): | |
26 | * - Clean up error handling | |
27 | * - Set blk_size for proper size checking | |
28 | * - Initialize track register when testing presence of floppy | |
29 | * - Implement some ioctl's | |
30 | * | |
31 | * Changes by Torsten Lang: | |
32 | * - When probing the floppies we should add the FDCCMDADD_H flag since | |
33 | * the FDC will otherwise wait forever when no disk is inserted... | |
34 | * | |
35 | * ++ Freddi Aschwanden (fa) 20.9.95 fixes for medusa: | |
36 | * - MFPDELAY() after each FDC access -> atari | |
37 | * - more/other disk formats | |
38 | * - DMA to the block buffer directly if we have a 32bit DMA | |
39 | * - for medusa, the step rate is always 3ms | |
40 | * - on medusa, use only cache_push() | |
41 | * Roman: | |
42 | * - Make disk format numbering independent from minors | |
43 | * - Let user set max. supported drive type (speeds up format | |
44 | * detection, saves buffer space) | |
45 | * | |
46 | * Roman 10/15/95: | |
47 | * - implement some more ioctls | |
48 | * - disk formatting | |
49 | * | |
50 | * Andreas 95/12/12: | |
51 | * - increase gap size at start of track for HD/ED disks | |
52 | * | |
53 | * Michael (MSch) 11/07/96: | |
54 | * - implemented FDSETPRM and FDDEFPRM ioctl | |
55 | * | |
56 | * Andreas (97/03/19): | |
57 | * - implemented missing BLK* ioctls | |
58 | * | |
59 | * Things left to do: | |
60 | * - Formatting | |
61 | * - Maybe a better strategy for disk change detection (does anyone | |
62 | * know one?) | |
63 | */ | |
64 | ||
65 | #include <linux/module.h> | |
66 | ||
67 | #include <linux/fd.h> | |
68 | #include <linux/delay.h> | |
69 | #include <linux/init.h> | |
6ec3938c | 70 | #include <linux/blk-mq.h> |
2a48fc0a | 71 | #include <linux/mutex.h> |
7b8a3d22 AB |
72 | #include <linux/completion.h> |
73 | #include <linux/wait.h> | |
1da177e4 | 74 | |
1da177e4 LT |
75 | #include <asm/atariints.h> |
76 | #include <asm/atari_stdma.h> | |
77 | #include <asm/atari_stram.h> | |
78 | ||
79 | #define FD_MAX_UNITS 2 | |
80 | ||
81 | #undef DEBUG | |
82 | ||
2a48fc0a | 83 | static DEFINE_MUTEX(ataflop_mutex); |
a336ca6f | 84 | static struct request *fd_request; |
1da177e4 | 85 | |
3e6b8c3c OS |
86 | /* |
87 | * WD1772 stuff | |
88 | */ | |
89 | ||
90 | /* register codes */ | |
91 | ||
92 | #define FDCSELREG_STP (0x80) /* command/status register */ | |
93 | #define FDCSELREG_TRA (0x82) /* track register */ | |
94 | #define FDCSELREG_SEC (0x84) /* sector register */ | |
95 | #define FDCSELREG_DTA (0x86) /* data register */ | |
96 | ||
97 | /* register names for FDC_READ/WRITE macros */ | |
98 | ||
99 | #define FDCREG_CMD 0 | |
100 | #define FDCREG_STATUS 0 | |
101 | #define FDCREG_TRACK 2 | |
102 | #define FDCREG_SECTOR 4 | |
103 | #define FDCREG_DATA 6 | |
104 | ||
105 | /* command opcodes */ | |
106 | ||
107 | #define FDCCMD_RESTORE (0x00) /* - */ | |
108 | #define FDCCMD_SEEK (0x10) /* | */ | |
109 | #define FDCCMD_STEP (0x20) /* | TYP 1 Commands */ | |
110 | #define FDCCMD_STIN (0x40) /* | */ | |
111 | #define FDCCMD_STOT (0x60) /* - */ | |
112 | #define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */ | |
113 | #define FDCCMD_WRSEC (0xa0) /* - " */ | |
114 | #define FDCCMD_RDADR (0xc0) /* - */ | |
115 | #define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */ | |
116 | #define FDCCMD_WRTRA (0xf0) /* - */ | |
117 | #define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */ | |
118 | ||
119 | /* command modifier bits */ | |
120 | ||
121 | #define FDCCMDADD_SR6 (0x00) /* step rate settings */ | |
122 | #define FDCCMDADD_SR12 (0x01) | |
123 | #define FDCCMDADD_SR2 (0x02) | |
124 | #define FDCCMDADD_SR3 (0x03) | |
125 | #define FDCCMDADD_V (0x04) /* verify */ | |
126 | #define FDCCMDADD_H (0x08) /* wait for spin-up */ | |
127 | #define FDCCMDADD_U (0x10) /* update track register */ | |
128 | #define FDCCMDADD_M (0x10) /* multiple sector access */ | |
129 | #define FDCCMDADD_E (0x04) /* head settling flag */ | |
130 | #define FDCCMDADD_P (0x02) /* precompensation off */ | |
131 | #define FDCCMDADD_A0 (0x01) /* DAM flag */ | |
132 | ||
133 | /* status register bits */ | |
134 | ||
135 | #define FDCSTAT_MOTORON (0x80) /* motor on */ | |
136 | #define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */ | |
137 | #define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */ | |
138 | #define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */ | |
139 | #define FDCSTAT_RECNF (0x10) /* record not found */ | |
140 | #define FDCSTAT_CRC (0x08) /* CRC error */ | |
141 | #define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */ | |
142 | #define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */ | |
143 | #define FDCSTAT_IDX (0x02) /* Index status (Type I) */ | |
144 | #define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */ | |
145 | #define FDCSTAT_BUSY (0x01) /* FDC is busy */ | |
146 | ||
147 | ||
148 | /* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */ | |
149 | #define DSKSIDE (0x01) | |
150 | ||
151 | #define DSKDRVNONE (0x06) | |
152 | #define DSKDRV0 (0x02) | |
153 | #define DSKDRV1 (0x04) | |
154 | ||
155 | /* step rates */ | |
156 | #define FDCSTEP_6 0x00 | |
157 | #define FDCSTEP_12 0x01 | |
158 | #define FDCSTEP_2 0x02 | |
159 | #define FDCSTEP_3 0x03 | |
160 | ||
161 | struct atari_format_descr { | |
162 | int track; /* to be formatted */ | |
163 | int head; /* "" "" */ | |
164 | int sect_offset; /* offset of first sector */ | |
165 | }; | |
166 | ||
1da177e4 LT |
167 | /* Disk types: DD, HD, ED */ |
168 | static struct atari_disk_type { | |
169 | const char *name; | |
170 | unsigned spt; /* sectors per track */ | |
171 | unsigned blocks; /* total number of blocks */ | |
172 | unsigned fdc_speed; /* fdc_speed setting */ | |
173 | unsigned stretch; /* track doubling ? */ | |
5ceadd2a | 174 | } atari_disk_type[] = { |
1da177e4 LT |
175 | { "d360", 9, 720, 0, 0}, /* 0: 360kB diskette */ |
176 | { "D360", 9, 720, 0, 1}, /* 1: 360kb in 720k or 1.2MB drive */ | |
177 | { "D720", 9,1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */ | |
178 | { "D820", 10,1640, 0, 0}, /* 3: DD disk with 82 tracks/10 sectors */ | |
179 | /* formats above are probed for type DD */ | |
180 | #define MAX_TYPE_DD 3 | |
181 | { "h1200",15,2400, 3, 0}, /* 4: 1.2MB diskette */ | |
182 | { "H1440",18,2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */ | |
183 | { "H1640",20,3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr 20 sec */ | |
184 | /* formats above are probed for types DD and HD */ | |
185 | #define MAX_TYPE_HD 6 | |
186 | { "E2880",36,5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */ | |
187 | { "E3280",40,6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr 40 sec */ | |
188 | /* formats above are probed for types DD, HD and ED */ | |
189 | #define MAX_TYPE_ED 8 | |
190 | /* types below are never autoprobed */ | |
191 | { "H1680",21,3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr 21 sec */ | |
192 | { "h410",10,820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec, stretch */ | |
193 | { "h1476",18,2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */ | |
194 | { "H1722",21,3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */ | |
195 | { "h420",10,840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec, stretch */ | |
196 | { "H830",10,1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */ | |
197 | { "h1494",18,2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */ | |
198 | { "H1743",21,3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */ | |
199 | { "h880",11,1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */ | |
200 | { "D1040",13,2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */ | |
201 | { "D1120",14,2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */ | |
202 | { "h1600",20,3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */ | |
203 | { "H1760",22,3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */ | |
204 | { "H1920",24,3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */ | |
205 | { "E3200",40,6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */ | |
206 | { "E3520",44,7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */ | |
207 | { "E3840",48,7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */ | |
208 | { "H1840",23,3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */ | |
209 | { "D800",10,1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */ | |
210 | }; | |
211 | ||
212 | static int StartDiskType[] = { | |
213 | MAX_TYPE_DD, | |
214 | MAX_TYPE_HD, | |
215 | MAX_TYPE_ED | |
216 | }; | |
217 | ||
218 | #define TYPE_DD 0 | |
219 | #define TYPE_HD 1 | |
220 | #define TYPE_ED 2 | |
221 | ||
222 | static int DriveType = TYPE_HD; | |
223 | ||
224 | static DEFINE_SPINLOCK(ataflop_lock); | |
225 | ||
226 | /* Array for translating minors into disk formats */ | |
227 | static struct { | |
228 | int index; | |
229 | unsigned drive_types; | |
230 | } minor2disktype[] = { | |
231 | { 0, TYPE_DD }, /* 1: d360 */ | |
232 | { 4, TYPE_HD }, /* 2: h1200 */ | |
233 | { 1, TYPE_DD }, /* 3: D360 */ | |
234 | { 2, TYPE_DD }, /* 4: D720 */ | |
235 | { 1, TYPE_DD }, /* 5: h360 = D360 */ | |
236 | { 2, TYPE_DD }, /* 6: h720 = D720 */ | |
237 | { 5, TYPE_HD }, /* 7: H1440 */ | |
238 | { 7, TYPE_ED }, /* 8: E2880 */ | |
239 | /* some PC formats :-) */ | |
240 | { 8, TYPE_ED }, /* 9: E3280 <- was "CompaQ" == E2880 for PC */ | |
241 | { 5, TYPE_HD }, /* 10: h1440 = H1440 */ | |
242 | { 9, TYPE_HD }, /* 11: H1680 */ | |
243 | { 10, TYPE_DD }, /* 12: h410 */ | |
244 | { 3, TYPE_DD }, /* 13: H820 <- == D820, 82x10 */ | |
245 | { 11, TYPE_HD }, /* 14: h1476 */ | |
246 | { 12, TYPE_HD }, /* 15: H1722 */ | |
247 | { 13, TYPE_DD }, /* 16: h420 */ | |
248 | { 14, TYPE_DD }, /* 17: H830 */ | |
249 | { 15, TYPE_HD }, /* 18: h1494 */ | |
250 | { 16, TYPE_HD }, /* 19: H1743 */ | |
251 | { 17, TYPE_DD }, /* 20: h880 */ | |
252 | { 18, TYPE_DD }, /* 21: D1040 */ | |
253 | { 19, TYPE_DD }, /* 22: D1120 */ | |
254 | { 20, TYPE_HD }, /* 23: h1600 */ | |
255 | { 21, TYPE_HD }, /* 24: H1760 */ | |
256 | { 22, TYPE_HD }, /* 25: H1920 */ | |
257 | { 23, TYPE_ED }, /* 26: E3200 */ | |
258 | { 24, TYPE_ED }, /* 27: E3520 */ | |
259 | { 25, TYPE_ED }, /* 28: E3840 */ | |
260 | { 26, TYPE_HD }, /* 29: H1840 */ | |
261 | { 27, TYPE_DD }, /* 30: D800 */ | |
262 | { 6, TYPE_HD }, /* 31: H1640 <- was H1600 == h1600 for PC */ | |
263 | }; | |
264 | ||
945f390f | 265 | #define NUM_DISK_MINORS ARRAY_SIZE(minor2disktype) |
1da177e4 LT |
266 | |
267 | /* | |
268 | * Maximum disk size (in kilobytes). This default is used whenever the | |
269 | * current disk size is unknown. | |
270 | */ | |
271 | #define MAX_DISK_SIZE 3280 | |
272 | ||
273 | /* | |
274 | * MSch: User-provided type information. 'drive' points to | |
275 | * the respective entry of this array. Set by FDSETPRM ioctls. | |
276 | */ | |
277 | static struct atari_disk_type user_params[FD_MAX_UNITS]; | |
278 | ||
279 | /* | |
280 | * User-provided permanent type information. 'drive' points to | |
281 | * the respective entry of this array. Set by FDDEFPRM ioctls, | |
282 | * restored upon disk change by floppy_revalidate() if valid (as seen by | |
283 | * default_params[].blocks > 0 - a bit in unit[].flags might be used for this?) | |
284 | */ | |
285 | static struct atari_disk_type default_params[FD_MAX_UNITS]; | |
286 | ||
287 | /* current info on each unit */ | |
288 | static struct atari_floppy_struct { | |
289 | int connected; /* !=0 : drive is connected */ | |
290 | int autoprobe; /* !=0 : do autoprobe */ | |
291 | ||
292 | struct atari_disk_type *disktype; /* current type of disk */ | |
293 | ||
294 | int track; /* current head position or -1 if | |
295 | unknown */ | |
296 | unsigned int steprate; /* steprate setting */ | |
297 | unsigned int wpstat; /* current state of WP signal (for | |
298 | disk change detection) */ | |
299 | int flags; /* flags */ | |
300 | struct gendisk *disk; | |
301 | int ref; | |
302 | int type; | |
6ec3938c | 303 | struct blk_mq_tag_set tag_set; |
1da177e4 LT |
304 | } unit[FD_MAX_UNITS]; |
305 | ||
306 | #define UD unit[drive] | |
307 | #define UDT unit[drive].disktype | |
308 | #define SUD unit[SelectedDrive] | |
309 | #define SUDT unit[SelectedDrive].disktype | |
310 | ||
311 | ||
312 | #define FDC_READ(reg) ({ \ | |
313 | /* unsigned long __flags; */ \ | |
314 | unsigned short __val; \ | |
315 | /* local_irq_save(__flags); */ \ | |
316 | dma_wd.dma_mode_status = 0x80 | (reg); \ | |
317 | udelay(25); \ | |
318 | __val = dma_wd.fdc_acces_seccount; \ | |
319 | MFPDELAY(); \ | |
320 | /* local_irq_restore(__flags); */ \ | |
321 | __val & 0xff; \ | |
322 | }) | |
323 | ||
324 | #define FDC_WRITE(reg,val) \ | |
325 | do { \ | |
326 | /* unsigned long __flags; */ \ | |
327 | /* local_irq_save(__flags); */ \ | |
328 | dma_wd.dma_mode_status = 0x80 | (reg); \ | |
329 | udelay(25); \ | |
330 | dma_wd.fdc_acces_seccount = (val); \ | |
331 | MFPDELAY(); \ | |
332 | /* local_irq_restore(__flags); */ \ | |
333 | } while(0) | |
334 | ||
335 | ||
336 | /* Buffering variables: | |
337 | * First, there is a DMA buffer in ST-RAM that is used for floppy DMA | |
338 | * operations. Second, a track buffer is used to cache a whole track | |
339 | * of the disk to save read operations. These are two separate buffers | |
340 | * because that allows write operations without clearing the track buffer. | |
341 | */ | |
342 | ||
343 | static int MaxSectors[] = { | |
344 | 11, 22, 44 | |
345 | }; | |
346 | static int BufferSize[] = { | |
347 | 15*512, 30*512, 60*512 | |
348 | }; | |
349 | ||
350 | #define BUFFER_SIZE (BufferSize[DriveType]) | |
351 | ||
352 | unsigned char *DMABuffer; /* buffer for writes */ | |
353 | static unsigned long PhysDMABuffer; /* physical address */ | |
354 | ||
355 | static int UseTrackbuffer = -1; /* Do track buffering? */ | |
8d3b33f6 | 356 | module_param(UseTrackbuffer, int, 0); |
1da177e4 LT |
357 | |
358 | unsigned char *TrackBuffer; /* buffer for reads */ | |
359 | static unsigned long PhysTrackBuffer; /* physical address */ | |
360 | static int BufferDrive, BufferSide, BufferTrack; | |
361 | static int read_track; /* non-zero if we are reading whole tracks */ | |
362 | ||
363 | #define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512) | |
364 | #define IS_BUFFERED(drive,side,track) \ | |
365 | (BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track)) | |
366 | ||
367 | /* | |
368 | * These are global variables, as that's the easiest way to give | |
369 | * information to interrupts. They are the data used for the current | |
370 | * request. | |
371 | */ | |
372 | static int SelectedDrive = 0; | |
373 | static int ReqCmd, ReqBlock; | |
374 | static int ReqSide, ReqTrack, ReqSector, ReqCnt; | |
375 | static int HeadSettleFlag = 0; | |
376 | static unsigned char *ReqData, *ReqBuffer; | |
377 | static int MotorOn = 0, MotorOffTrys; | |
378 | static int IsFormatting = 0, FormatError; | |
379 | ||
380 | static int UserSteprate[FD_MAX_UNITS] = { -1, -1 }; | |
8d3b33f6 | 381 | module_param_array(UserSteprate, int, NULL, 0); |
1da177e4 | 382 | |
7b8a3d22 | 383 | static DECLARE_COMPLETION(format_wait); |
1da177e4 LT |
384 | |
385 | static unsigned long changed_floppies = 0xff, fake_change = 0; | |
386 | #define CHECK_CHANGE_DELAY HZ/2 | |
387 | ||
388 | #define FD_MOTOR_OFF_DELAY (3*HZ) | |
389 | #define FD_MOTOR_OFF_MAXTRY (10*20) | |
390 | ||
391 | #define FLOPPY_TIMEOUT (6*HZ) | |
392 | #define RECALIBRATE_ERRORS 4 /* After this many errors the drive | |
393 | * will be recalibrated. */ | |
394 | #define MAX_ERRORS 8 /* After this many errors the driver | |
395 | * will give up. */ | |
396 | ||
397 | ||
398 | /* | |
399 | * The driver is trying to determine the correct media format | |
400 | * while Probing is set. fd_rwsec_done() clears it after a | |
401 | * successful access. | |
402 | */ | |
403 | static int Probing = 0; | |
404 | ||
405 | /* This flag is set when a dummy seek is necessary to make the WP | |
406 | * status bit accessible. | |
407 | */ | |
408 | static int NeedSeek = 0; | |
409 | ||
410 | ||
411 | #ifdef DEBUG | |
412 | #define DPRINT(a) printk a | |
413 | #else | |
414 | #define DPRINT(a) | |
415 | #endif | |
416 | ||
417 | /***************************** Prototypes *****************************/ | |
418 | ||
419 | static void fd_select_side( int side ); | |
420 | static void fd_select_drive( int drive ); | |
421 | static void fd_deselect( void ); | |
24ed960a KC |
422 | static void fd_motor_off_timer(struct timer_list *unused); |
423 | static void check_change(struct timer_list *unused); | |
7d12e780 | 424 | static irqreturn_t floppy_irq (int irq, void *dummy); |
1da177e4 LT |
425 | static void fd_error( void ); |
426 | static int do_format(int drive, int type, struct atari_format_descr *desc); | |
427 | static void do_fd_action( int drive ); | |
428 | static void fd_calibrate( void ); | |
429 | static void fd_calibrate_done( int status ); | |
430 | static void fd_seek( void ); | |
431 | static void fd_seek_done( int status ); | |
432 | static void fd_rwsec( void ); | |
24ed960a | 433 | static void fd_readtrack_check(struct timer_list *unused); |
1da177e4 LT |
434 | static void fd_rwsec_done( int status ); |
435 | static void fd_rwsec_done1(int status); | |
436 | static void fd_writetrack( void ); | |
437 | static void fd_writetrack_done( int status ); | |
24ed960a | 438 | static void fd_times_out(struct timer_list *unused); |
1da177e4 LT |
439 | static void finish_fdc( void ); |
440 | static void finish_fdc_done( int dummy ); | |
441 | static void setup_req_params( int drive ); | |
8a6cfeb6 | 442 | static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int |
1da177e4 LT |
443 | cmd, unsigned long param); |
444 | static void fd_probe( int drive ); | |
445 | static int fd_test_drive_present( int drive ); | |
446 | static void config_types( void ); | |
60ad2340 | 447 | static int floppy_open(struct block_device *bdev, fmode_t mode); |
db2a144b | 448 | static void floppy_release(struct gendisk *disk, fmode_t mode); |
1da177e4 LT |
449 | |
450 | /************************* End of Prototypes **************************/ | |
451 | ||
1d27e3e2 KC |
452 | static DEFINE_TIMER(motor_off_timer, fd_motor_off_timer); |
453 | static DEFINE_TIMER(readtrack_timer, fd_readtrack_check); | |
454 | static DEFINE_TIMER(timeout_timer, fd_times_out); | |
455 | static DEFINE_TIMER(fd_timer, check_change); | |
1da177e4 | 456 | |
2a842aca | 457 | static void fd_end_request_cur(blk_status_t err) |
a336ca6f | 458 | { |
6ec3938c OS |
459 | if (!blk_update_request(fd_request, err, |
460 | blk_rq_cur_bytes(fd_request))) { | |
461 | __blk_mq_end_request(fd_request, err); | |
a336ca6f | 462 | fd_request = NULL; |
6ec3938c | 463 | } |
a336ca6f TH |
464 | } |
465 | ||
1da177e4 LT |
466 | static inline void start_motor_off_timer(void) |
467 | { | |
468 | mod_timer(&motor_off_timer, jiffies + FD_MOTOR_OFF_DELAY); | |
469 | MotorOffTrys = 0; | |
470 | } | |
471 | ||
472 | static inline void start_check_change_timer( void ) | |
473 | { | |
474 | mod_timer(&fd_timer, jiffies + CHECK_CHANGE_DELAY); | |
475 | } | |
476 | ||
477 | static inline void start_timeout(void) | |
478 | { | |
479 | mod_timer(&timeout_timer, jiffies + FLOPPY_TIMEOUT); | |
480 | } | |
481 | ||
482 | static inline void stop_timeout(void) | |
483 | { | |
484 | del_timer(&timeout_timer); | |
485 | } | |
486 | ||
487 | /* Select the side to use. */ | |
488 | ||
489 | static void fd_select_side( int side ) | |
490 | { | |
491 | unsigned long flags; | |
492 | ||
493 | /* protect against various other ints mucking around with the PSG */ | |
494 | local_irq_save(flags); | |
495 | ||
496 | sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */ | |
497 | sound_ym.wd_data = (side == 0) ? sound_ym.rd_data_reg_sel | 0x01 : | |
498 | sound_ym.rd_data_reg_sel & 0xfe; | |
499 | ||
500 | local_irq_restore(flags); | |
501 | } | |
502 | ||
503 | ||
504 | /* Select a drive, update the FDC's track register and set the correct | |
505 | * clock speed for this disk's type. | |
506 | */ | |
507 | ||
508 | static void fd_select_drive( int drive ) | |
509 | { | |
510 | unsigned long flags; | |
511 | unsigned char tmp; | |
512 | ||
513 | if (drive == SelectedDrive) | |
514 | return; | |
515 | ||
516 | /* protect against various other ints mucking around with the PSG */ | |
517 | local_irq_save(flags); | |
518 | sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */ | |
519 | tmp = sound_ym.rd_data_reg_sel; | |
520 | sound_ym.wd_data = (tmp | DSKDRVNONE) & ~(drive == 0 ? DSKDRV0 : DSKDRV1); | |
521 | atari_dont_touch_floppy_select = 1; | |
522 | local_irq_restore(flags); | |
523 | ||
524 | /* restore track register to saved value */ | |
525 | FDC_WRITE( FDCREG_TRACK, UD.track ); | |
526 | udelay(25); | |
527 | ||
528 | /* select 8/16 MHz */ | |
529 | if (UDT) | |
530 | if (ATARIHW_PRESENT(FDCSPEED)) | |
531 | dma_wd.fdc_speed = UDT->fdc_speed; | |
532 | ||
533 | SelectedDrive = drive; | |
534 | } | |
535 | ||
536 | ||
537 | /* Deselect both drives. */ | |
538 | ||
539 | static void fd_deselect( void ) | |
540 | { | |
541 | unsigned long flags; | |
542 | ||
543 | /* protect against various other ints mucking around with the PSG */ | |
544 | local_irq_save(flags); | |
545 | atari_dont_touch_floppy_select = 0; | |
546 | sound_ym.rd_data_reg_sel=14; /* Select PSG Port A */ | |
547 | sound_ym.wd_data = (sound_ym.rd_data_reg_sel | | |
548 | (MACH_IS_FALCON ? 3 : 7)); /* no drives selected */ | |
549 | /* On Falcon, the drive B select line is used on the printer port, so | |
550 | * leave it alone... */ | |
551 | SelectedDrive = -1; | |
552 | local_irq_restore(flags); | |
553 | } | |
554 | ||
555 | ||
556 | /* This timer function deselects the drives when the FDC switched the | |
557 | * motor off. The deselection cannot happen earlier because the FDC | |
558 | * counts the index signals, which arrive only if one drive is selected. | |
559 | */ | |
560 | ||
24ed960a | 561 | static void fd_motor_off_timer(struct timer_list *unused) |
1da177e4 LT |
562 | { |
563 | unsigned char status; | |
564 | ||
565 | if (SelectedDrive < 0) | |
566 | /* no drive selected, needn't deselect anyone */ | |
567 | return; | |
568 | ||
569 | if (stdma_islocked()) | |
570 | goto retry; | |
571 | ||
572 | status = FDC_READ( FDCREG_STATUS ); | |
573 | ||
574 | if (!(status & 0x80)) { | |
575 | /* motor already turned off by FDC -> deselect drives */ | |
576 | MotorOn = 0; | |
577 | fd_deselect(); | |
578 | return; | |
579 | } | |
580 | /* not yet off, try again */ | |
581 | ||
582 | retry: | |
583 | /* Test again later; if tested too often, it seems there is no disk | |
584 | * in the drive and the FDC will leave the motor on forever (or, | |
585 | * at least until a disk is inserted). So we'll test only twice | |
586 | * per second from then on... | |
587 | */ | |
588 | mod_timer(&motor_off_timer, | |
589 | jiffies + (MotorOffTrys++ < FD_MOTOR_OFF_MAXTRY ? HZ/20 : HZ/2)); | |
590 | } | |
591 | ||
592 | ||
593 | /* This function is repeatedly called to detect disk changes (as good | |
594 | * as possible) and keep track of the current state of the write protection. | |
595 | */ | |
596 | ||
24ed960a | 597 | static void check_change(struct timer_list *unused) |
1da177e4 LT |
598 | { |
599 | static int drive = 0; | |
600 | ||
601 | unsigned long flags; | |
602 | unsigned char old_porta; | |
603 | int stat; | |
604 | ||
605 | if (++drive > 1 || !UD.connected) | |
606 | drive = 0; | |
607 | ||
608 | /* protect against various other ints mucking around with the PSG */ | |
609 | local_irq_save(flags); | |
610 | ||
611 | if (!stdma_islocked()) { | |
612 | sound_ym.rd_data_reg_sel = 14; | |
613 | old_porta = sound_ym.rd_data_reg_sel; | |
614 | sound_ym.wd_data = (old_porta | DSKDRVNONE) & | |
615 | ~(drive == 0 ? DSKDRV0 : DSKDRV1); | |
616 | stat = !!(FDC_READ( FDCREG_STATUS ) & FDCSTAT_WPROT); | |
617 | sound_ym.wd_data = old_porta; | |
618 | ||
619 | if (stat != UD.wpstat) { | |
620 | DPRINT(( "wpstat[%d] = %d\n", drive, stat )); | |
621 | UD.wpstat = stat; | |
622 | set_bit (drive, &changed_floppies); | |
623 | } | |
624 | } | |
625 | local_irq_restore(flags); | |
626 | ||
627 | start_check_change_timer(); | |
628 | } | |
629 | ||
630 | ||
631 | /* Handling of the Head Settling Flag: This flag should be set after each | |
632 | * seek operation, because we don't use seeks with verify. | |
633 | */ | |
634 | ||
635 | static inline void set_head_settle_flag(void) | |
636 | { | |
637 | HeadSettleFlag = FDCCMDADD_E; | |
638 | } | |
639 | ||
640 | static inline int get_head_settle_flag(void) | |
641 | { | |
642 | int tmp = HeadSettleFlag; | |
643 | HeadSettleFlag = 0; | |
644 | return( tmp ); | |
645 | } | |
646 | ||
647 | static inline void copy_buffer(void *from, void *to) | |
648 | { | |
649 | ulong *p1 = (ulong *)from, *p2 = (ulong *)to; | |
650 | int cnt; | |
651 | ||
652 | for (cnt = 512/4; cnt; cnt--) | |
653 | *p2++ = *p1++; | |
654 | } | |
655 | ||
656 | ||
657 | ||
658 | ||
659 | /* General Interrupt Handling */ | |
660 | ||
661 | static void (*FloppyIRQHandler)( int status ) = NULL; | |
662 | ||
7d12e780 | 663 | static irqreturn_t floppy_irq (int irq, void *dummy) |
1da177e4 LT |
664 | { |
665 | unsigned char status; | |
666 | void (*handler)( int ); | |
667 | ||
668 | handler = xchg(&FloppyIRQHandler, NULL); | |
669 | ||
670 | if (handler) { | |
671 | nop(); | |
672 | status = FDC_READ( FDCREG_STATUS ); | |
673 | DPRINT(("FDC irq, status = %02x handler = %08lx\n",status,(unsigned long)handler)); | |
674 | handler( status ); | |
675 | } | |
676 | else { | |
677 | DPRINT(("FDC irq, no handler\n")); | |
678 | } | |
679 | return IRQ_HANDLED; | |
680 | } | |
681 | ||
682 | ||
683 | /* Error handling: If some error happened, retry some times, then | |
684 | * recalibrate, then try again, and fail after MAX_ERRORS. | |
685 | */ | |
686 | ||
687 | static void fd_error( void ) | |
688 | { | |
689 | if (IsFormatting) { | |
690 | IsFormatting = 0; | |
691 | FormatError = 1; | |
7b8a3d22 | 692 | complete(&format_wait); |
1da177e4 LT |
693 | return; |
694 | } | |
695 | ||
a336ca6f | 696 | if (!fd_request) |
1da177e4 LT |
697 | return; |
698 | ||
c8e90782 CH |
699 | fd_request->error_count++; |
700 | if (fd_request->error_count >= MAX_ERRORS) { | |
1da177e4 | 701 | printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive ); |
2a842aca | 702 | fd_end_request_cur(BLK_STS_IOERR); |
1da177e4 | 703 | } |
c8e90782 | 704 | else if (fd_request->error_count == RECALIBRATE_ERRORS) { |
1da177e4 LT |
705 | printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive ); |
706 | if (SelectedDrive != -1) | |
707 | SUD.track = -1; | |
708 | } | |
1da177e4 LT |
709 | } |
710 | ||
711 | ||
712 | ||
713 | #define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0) | |
714 | ||
715 | ||
716 | /* ---------- Formatting ---------- */ | |
717 | ||
718 | #define FILL(n,val) \ | |
719 | do { \ | |
720 | memset( p, val, n ); \ | |
721 | p += n; \ | |
722 | } while(0) | |
723 | ||
724 | static int do_format(int drive, int type, struct atari_format_descr *desc) | |
725 | { | |
6ec3938c | 726 | struct request_queue *q = unit[drive].disk->queue; |
1da177e4 LT |
727 | unsigned char *p; |
728 | int sect, nsect; | |
729 | unsigned long flags; | |
6ec3938c | 730 | int ret; |
1da177e4 | 731 | |
6ec3938c OS |
732 | blk_mq_freeze_queue(q); |
733 | blk_mq_quiesce_queue(q); | |
1da177e4 LT |
734 | |
735 | local_irq_save(flags); | |
1da177e4 LT |
736 | stdma_lock(floppy_irq, NULL); |
737 | atari_turnon_irq( IRQ_MFP_FDC ); /* should be already, just to be sure */ | |
738 | local_irq_restore(flags); | |
739 | ||
740 | if (type) { | |
741 | if (--type >= NUM_DISK_MINORS || | |
742 | minor2disktype[type].drive_types > DriveType) { | |
6ec3938c OS |
743 | ret = -EINVAL; |
744 | goto out; | |
1da177e4 LT |
745 | } |
746 | type = minor2disktype[type].index; | |
5ceadd2a | 747 | UDT = &atari_disk_type[type]; |
1da177e4 LT |
748 | } |
749 | ||
750 | if (!UDT || desc->track >= UDT->blocks/UDT->spt/2 || desc->head >= 2) { | |
6ec3938c OS |
751 | ret = -EINVAL; |
752 | goto out; | |
1da177e4 LT |
753 | } |
754 | ||
755 | nsect = UDT->spt; | |
756 | p = TrackBuffer; | |
757 | /* The track buffer is used for the raw track data, so its | |
758 | contents become invalid! */ | |
759 | BufferDrive = -1; | |
760 | /* stop deselect timer */ | |
761 | del_timer( &motor_off_timer ); | |
762 | ||
763 | FILL( 60 * (nsect / 9), 0x4e ); | |
764 | for( sect = 0; sect < nsect; ++sect ) { | |
765 | FILL( 12, 0 ); | |
766 | FILL( 3, 0xf5 ); | |
767 | *p++ = 0xfe; | |
768 | *p++ = desc->track; | |
769 | *p++ = desc->head; | |
770 | *p++ = (nsect + sect - desc->sect_offset) % nsect + 1; | |
771 | *p++ = 2; | |
772 | *p++ = 0xf7; | |
773 | FILL( 22, 0x4e ); | |
774 | FILL( 12, 0 ); | |
775 | FILL( 3, 0xf5 ); | |
776 | *p++ = 0xfb; | |
777 | FILL( 512, 0xe5 ); | |
778 | *p++ = 0xf7; | |
779 | FILL( 40, 0x4e ); | |
780 | } | |
781 | FILL( TrackBuffer+BUFFER_SIZE-p, 0x4e ); | |
782 | ||
783 | IsFormatting = 1; | |
784 | FormatError = 0; | |
785 | ReqTrack = desc->track; | |
786 | ReqSide = desc->head; | |
787 | do_fd_action( drive ); | |
788 | ||
7b8a3d22 | 789 | wait_for_completion(&format_wait); |
1da177e4 | 790 | |
6ec3938c OS |
791 | ret = FormatError ? -EIO : 0; |
792 | out: | |
793 | blk_mq_unquiesce_queue(q); | |
794 | blk_mq_unfreeze_queue(q); | |
795 | return ret; | |
1da177e4 LT |
796 | } |
797 | ||
798 | ||
799 | /* do_fd_action() is the general procedure for a fd request: All | |
800 | * required parameter settings (drive select, side select, track | |
801 | * position) are checked and set if needed. For each of these | |
802 | * parameters and the actual reading or writing exist two functions: | |
803 | * one that starts the setting (or skips it if possible) and one | |
804 | * callback for the "done" interrupt. Each done func calls the next | |
805 | * set function to propagate the request down to fd_rwsec_done(). | |
806 | */ | |
807 | ||
808 | static void do_fd_action( int drive ) | |
809 | { | |
810 | DPRINT(("do_fd_action\n")); | |
811 | ||
812 | if (UseTrackbuffer && !IsFormatting) { | |
813 | repeat: | |
814 | if (IS_BUFFERED( drive, ReqSide, ReqTrack )) { | |
815 | if (ReqCmd == READ) { | |
816 | copy_buffer( SECTOR_BUFFER(ReqSector), ReqData ); | |
a336ca6f | 817 | if (++ReqCnt < blk_rq_cur_sectors(fd_request)) { |
1da177e4 LT |
818 | /* read next sector */ |
819 | setup_req_params( drive ); | |
820 | goto repeat; | |
821 | } | |
822 | else { | |
823 | /* all sectors finished */ | |
2a842aca | 824 | fd_end_request_cur(BLK_STS_OK); |
1da177e4 LT |
825 | return; |
826 | } | |
827 | } | |
828 | else { | |
829 | /* cmd == WRITE, pay attention to track buffer | |
830 | * consistency! */ | |
831 | copy_buffer( ReqData, SECTOR_BUFFER(ReqSector) ); | |
832 | } | |
833 | } | |
834 | } | |
835 | ||
836 | if (SelectedDrive != drive) | |
837 | fd_select_drive( drive ); | |
838 | ||
839 | if (UD.track == -1) | |
840 | fd_calibrate(); | |
841 | else if (UD.track != ReqTrack << UDT->stretch) | |
842 | fd_seek(); | |
843 | else if (IsFormatting) | |
844 | fd_writetrack(); | |
845 | else | |
846 | fd_rwsec(); | |
847 | } | |
848 | ||
849 | ||
850 | /* Seek to track 0 if the current track is unknown */ | |
851 | ||
852 | static void fd_calibrate( void ) | |
853 | { | |
854 | if (SUD.track >= 0) { | |
855 | fd_calibrate_done( 0 ); | |
856 | return; | |
857 | } | |
858 | ||
859 | if (ATARIHW_PRESENT(FDCSPEED)) | |
9677d64e | 860 | dma_wd.fdc_speed = 0; /* always seek with 8 Mhz */ |
1da177e4 LT |
861 | DPRINT(("fd_calibrate\n")); |
862 | SET_IRQ_HANDLER( fd_calibrate_done ); | |
863 | /* we can't verify, since the speed may be incorrect */ | |
864 | FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | SUD.steprate ); | |
865 | ||
866 | NeedSeek = 1; | |
867 | MotorOn = 1; | |
868 | start_timeout(); | |
869 | /* wait for IRQ */ | |
870 | } | |
871 | ||
872 | ||
873 | static void fd_calibrate_done( int status ) | |
874 | { | |
875 | DPRINT(("fd_calibrate_done()\n")); | |
876 | stop_timeout(); | |
877 | ||
878 | /* set the correct speed now */ | |
879 | if (ATARIHW_PRESENT(FDCSPEED)) | |
880 | dma_wd.fdc_speed = SUDT->fdc_speed; | |
881 | if (status & FDCSTAT_RECNF) { | |
882 | printk(KERN_ERR "fd%d: restore failed\n", SelectedDrive ); | |
883 | fd_error(); | |
884 | } | |
885 | else { | |
886 | SUD.track = 0; | |
887 | fd_seek(); | |
888 | } | |
889 | } | |
890 | ||
891 | ||
892 | /* Seek the drive to the requested track. The drive must have been | |
893 | * calibrated at some point before this. | |
894 | */ | |
895 | ||
896 | static void fd_seek( void ) | |
897 | { | |
898 | if (SUD.track == ReqTrack << SUDT->stretch) { | |
899 | fd_seek_done( 0 ); | |
900 | return; | |
901 | } | |
902 | ||
903 | if (ATARIHW_PRESENT(FDCSPEED)) { | |
904 | dma_wd.fdc_speed = 0; /* always seek witch 8 Mhz */ | |
905 | MFPDELAY(); | |
906 | } | |
907 | ||
908 | DPRINT(("fd_seek() to track %d\n",ReqTrack)); | |
909 | FDC_WRITE( FDCREG_DATA, ReqTrack << SUDT->stretch); | |
910 | udelay(25); | |
911 | SET_IRQ_HANDLER( fd_seek_done ); | |
912 | FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK | SUD.steprate ); | |
913 | ||
914 | MotorOn = 1; | |
915 | set_head_settle_flag(); | |
916 | start_timeout(); | |
917 | /* wait for IRQ */ | |
918 | } | |
919 | ||
920 | ||
921 | static void fd_seek_done( int status ) | |
922 | { | |
923 | DPRINT(("fd_seek_done()\n")); | |
924 | stop_timeout(); | |
925 | ||
926 | /* set the correct speed */ | |
927 | if (ATARIHW_PRESENT(FDCSPEED)) | |
928 | dma_wd.fdc_speed = SUDT->fdc_speed; | |
929 | if (status & FDCSTAT_RECNF) { | |
930 | printk(KERN_ERR "fd%d: seek error (to track %d)\n", | |
931 | SelectedDrive, ReqTrack ); | |
932 | /* we don't know exactly which track we are on now! */ | |
933 | SUD.track = -1; | |
934 | fd_error(); | |
935 | } | |
936 | else { | |
937 | SUD.track = ReqTrack << SUDT->stretch; | |
938 | NeedSeek = 0; | |
939 | if (IsFormatting) | |
940 | fd_writetrack(); | |
941 | else | |
942 | fd_rwsec(); | |
943 | } | |
944 | } | |
945 | ||
946 | ||
947 | /* This does the actual reading/writing after positioning the head | |
948 | * over the correct track. | |
949 | */ | |
950 | ||
951 | static int MultReadInProgress = 0; | |
952 | ||
953 | ||
954 | static void fd_rwsec( void ) | |
955 | { | |
956 | unsigned long paddr, flags; | |
957 | unsigned int rwflag, old_motoron; | |
958 | unsigned int track; | |
959 | ||
960 | DPRINT(("fd_rwsec(), Sec=%d, Access=%c\n",ReqSector, ReqCmd == WRITE ? 'w' : 'r' )); | |
961 | if (ReqCmd == WRITE) { | |
962 | if (ATARIHW_PRESENT(EXTD_DMA)) { | |
963 | paddr = virt_to_phys(ReqData); | |
964 | } | |
965 | else { | |
966 | copy_buffer( ReqData, DMABuffer ); | |
967 | paddr = PhysDMABuffer; | |
968 | } | |
969 | dma_cache_maintenance( paddr, 512, 1 ); | |
970 | rwflag = 0x100; | |
971 | } | |
972 | else { | |
973 | if (read_track) | |
974 | paddr = PhysTrackBuffer; | |
975 | else | |
976 | paddr = ATARIHW_PRESENT(EXTD_DMA) ? | |
977 | virt_to_phys(ReqData) : PhysDMABuffer; | |
978 | rwflag = 0; | |
979 | } | |
980 | ||
981 | fd_select_side( ReqSide ); | |
982 | ||
983 | /* Start sector of this operation */ | |
984 | FDC_WRITE( FDCREG_SECTOR, read_track ? 1 : ReqSector ); | |
985 | MFPDELAY(); | |
986 | /* Cheat for track if stretch != 0 */ | |
987 | if (SUDT->stretch) { | |
988 | track = FDC_READ( FDCREG_TRACK); | |
989 | MFPDELAY(); | |
990 | FDC_WRITE( FDCREG_TRACK, track >> SUDT->stretch); | |
991 | } | |
992 | udelay(25); | |
993 | ||
994 | /* Setup DMA */ | |
995 | local_irq_save(flags); | |
996 | dma_wd.dma_lo = (unsigned char)paddr; | |
997 | MFPDELAY(); | |
998 | paddr >>= 8; | |
999 | dma_wd.dma_md = (unsigned char)paddr; | |
1000 | MFPDELAY(); | |
1001 | paddr >>= 8; | |
1002 | if (ATARIHW_PRESENT(EXTD_DMA)) | |
1003 | st_dma_ext_dmahi = (unsigned short)paddr; | |
1004 | else | |
1005 | dma_wd.dma_hi = (unsigned char)paddr; | |
1006 | MFPDELAY(); | |
1007 | local_irq_restore(flags); | |
1008 | ||
1009 | /* Clear FIFO and switch DMA to correct mode */ | |
1010 | dma_wd.dma_mode_status = 0x90 | rwflag; | |
1011 | MFPDELAY(); | |
1012 | dma_wd.dma_mode_status = 0x90 | (rwflag ^ 0x100); | |
1013 | MFPDELAY(); | |
1014 | dma_wd.dma_mode_status = 0x90 | rwflag; | |
1015 | MFPDELAY(); | |
1016 | ||
1017 | /* How many sectors for DMA */ | |
1018 | dma_wd.fdc_acces_seccount = read_track ? SUDT->spt : 1; | |
1019 | ||
1020 | udelay(25); | |
1021 | ||
1022 | /* Start operation */ | |
1023 | dma_wd.dma_mode_status = FDCSELREG_STP | rwflag; | |
1024 | udelay(25); | |
1025 | SET_IRQ_HANDLER( fd_rwsec_done ); | |
1026 | dma_wd.fdc_acces_seccount = | |
1027 | (get_head_settle_flag() | | |
1028 | (rwflag ? FDCCMD_WRSEC : (FDCCMD_RDSEC | (read_track ? FDCCMDADD_M : 0)))); | |
1029 | ||
1030 | old_motoron = MotorOn; | |
1031 | MotorOn = 1; | |
1032 | NeedSeek = 1; | |
1033 | /* wait for interrupt */ | |
1034 | ||
1035 | if (read_track) { | |
1036 | /* If reading a whole track, wait about one disk rotation and | |
1037 | * then check if all sectors are read. The FDC will even | |
1038 | * search for the first non-existent sector and need 1 sec to | |
1039 | * recognise that it isn't present :-( | |
1040 | */ | |
1041 | MultReadInProgress = 1; | |
1042 | mod_timer(&readtrack_timer, | |
1043 | /* 1 rot. + 5 rot.s if motor was off */ | |
1044 | jiffies + HZ/5 + (old_motoron ? 0 : HZ)); | |
1045 | } | |
1046 | start_timeout(); | |
1047 | } | |
1048 | ||
1049 | ||
24ed960a | 1050 | static void fd_readtrack_check(struct timer_list *unused) |
1da177e4 LT |
1051 | { |
1052 | unsigned long flags, addr, addr2; | |
1053 | ||
1054 | local_irq_save(flags); | |
1055 | ||
1056 | if (!MultReadInProgress) { | |
1057 | /* This prevents a race condition that could arise if the | |
1058 | * interrupt is triggered while the calling of this timer | |
1059 | * callback function takes place. The IRQ function then has | |
1060 | * already cleared 'MultReadInProgress' when flow of control | |
1061 | * gets here. | |
1062 | */ | |
1063 | local_irq_restore(flags); | |
1064 | return; | |
1065 | } | |
1066 | ||
1067 | /* get the current DMA address */ | |
1068 | /* ++ f.a. read twice to avoid being fooled by switcher */ | |
1069 | addr = 0; | |
1070 | do { | |
1071 | addr2 = addr; | |
1072 | addr = dma_wd.dma_lo & 0xff; | |
1073 | MFPDELAY(); | |
1074 | addr |= (dma_wd.dma_md & 0xff) << 8; | |
1075 | MFPDELAY(); | |
1076 | if (ATARIHW_PRESENT( EXTD_DMA )) | |
1077 | addr |= (st_dma_ext_dmahi & 0xffff) << 16; | |
1078 | else | |
1079 | addr |= (dma_wd.dma_hi & 0xff) << 16; | |
1080 | MFPDELAY(); | |
1081 | } while(addr != addr2); | |
1082 | ||
1083 | if (addr >= PhysTrackBuffer + SUDT->spt*512) { | |
1084 | /* already read enough data, force an FDC interrupt to stop | |
1085 | * the read operation | |
1086 | */ | |
1087 | SET_IRQ_HANDLER( NULL ); | |
1088 | MultReadInProgress = 0; | |
1089 | local_irq_restore(flags); | |
1090 | DPRINT(("fd_readtrack_check(): done\n")); | |
1091 | FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI ); | |
1092 | udelay(25); | |
1093 | ||
1094 | /* No error until now -- the FDC would have interrupted | |
1095 | * otherwise! | |
1096 | */ | |
1097 | fd_rwsec_done1(0); | |
1098 | } | |
1099 | else { | |
1100 | /* not yet finished, wait another tenth rotation */ | |
1101 | local_irq_restore(flags); | |
1102 | DPRINT(("fd_readtrack_check(): not yet finished\n")); | |
1103 | mod_timer(&readtrack_timer, jiffies + HZ/5/10); | |
1104 | } | |
1105 | } | |
1106 | ||
1107 | ||
1108 | static void fd_rwsec_done( int status ) | |
1109 | { | |
1110 | DPRINT(("fd_rwsec_done()\n")); | |
1111 | ||
1112 | if (read_track) { | |
1113 | del_timer(&readtrack_timer); | |
1114 | if (!MultReadInProgress) | |
1115 | return; | |
1116 | MultReadInProgress = 0; | |
1117 | } | |
1118 | fd_rwsec_done1(status); | |
1119 | } | |
1120 | ||
1121 | static void fd_rwsec_done1(int status) | |
1122 | { | |
1123 | unsigned int track; | |
1124 | ||
1125 | stop_timeout(); | |
1126 | ||
1127 | /* Correct the track if stretch != 0 */ | |
1128 | if (SUDT->stretch) { | |
1129 | track = FDC_READ( FDCREG_TRACK); | |
1130 | MFPDELAY(); | |
1131 | FDC_WRITE( FDCREG_TRACK, track << SUDT->stretch); | |
1132 | } | |
1133 | ||
1134 | if (!UseTrackbuffer) { | |
1135 | dma_wd.dma_mode_status = 0x90; | |
1136 | MFPDELAY(); | |
1137 | if (!(dma_wd.dma_mode_status & 0x01)) { | |
1138 | printk(KERN_ERR "fd%d: DMA error\n", SelectedDrive ); | |
1139 | goto err_end; | |
1140 | } | |
1141 | } | |
1142 | MFPDELAY(); | |
1143 | ||
1144 | if (ReqCmd == WRITE && (status & FDCSTAT_WPROT)) { | |
1145 | printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive ); | |
1146 | goto err_end; | |
1147 | } | |
1148 | if ((status & FDCSTAT_RECNF) && | |
1149 | /* RECNF is no error after a multiple read when the FDC | |
1150 | searched for a non-existent sector! */ | |
1151 | !(read_track && FDC_READ(FDCREG_SECTOR) > SUDT->spt)) { | |
1152 | if (Probing) { | |
5ceadd2a | 1153 | if (SUDT > atari_disk_type) { |
1da177e4 LT |
1154 | if (SUDT[-1].blocks > ReqBlock) { |
1155 | /* try another disk type */ | |
1156 | SUDT--; | |
1157 | set_capacity(unit[SelectedDrive].disk, | |
1158 | SUDT->blocks); | |
1159 | } else | |
1160 | Probing = 0; | |
1161 | } | |
1162 | else { | |
1163 | if (SUD.flags & FTD_MSG) | |
1164 | printk(KERN_INFO "fd%d: Auto-detected floppy type %s\n", | |
1165 | SelectedDrive, SUDT->name ); | |
1166 | Probing=0; | |
1167 | } | |
1168 | } else { | |
1169 | /* record not found, but not probing. Maybe stretch wrong ? Restart probing */ | |
1170 | if (SUD.autoprobe) { | |
5ceadd2a | 1171 | SUDT = atari_disk_type + StartDiskType[DriveType]; |
1da177e4 LT |
1172 | set_capacity(unit[SelectedDrive].disk, |
1173 | SUDT->blocks); | |
1174 | Probing = 1; | |
1175 | } | |
1176 | } | |
1177 | if (Probing) { | |
1178 | if (ATARIHW_PRESENT(FDCSPEED)) { | |
1179 | dma_wd.fdc_speed = SUDT->fdc_speed; | |
1180 | MFPDELAY(); | |
1181 | } | |
1182 | setup_req_params( SelectedDrive ); | |
1183 | BufferDrive = -1; | |
1184 | do_fd_action( SelectedDrive ); | |
1185 | return; | |
1186 | } | |
1187 | ||
1188 | printk(KERN_ERR "fd%d: sector %d not found (side %d, track %d)\n", | |
1189 | SelectedDrive, FDC_READ (FDCREG_SECTOR), ReqSide, ReqTrack ); | |
1190 | goto err_end; | |
1191 | } | |
1192 | if (status & FDCSTAT_CRC) { | |
1193 | printk(KERN_ERR "fd%d: CRC error (side %d, track %d, sector %d)\n", | |
1194 | SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) ); | |
1195 | goto err_end; | |
1196 | } | |
1197 | if (status & FDCSTAT_LOST) { | |
1198 | printk(KERN_ERR "fd%d: lost data (side %d, track %d, sector %d)\n", | |
1199 | SelectedDrive, ReqSide, ReqTrack, FDC_READ (FDCREG_SECTOR) ); | |
1200 | goto err_end; | |
1201 | } | |
1202 | ||
1203 | Probing = 0; | |
1204 | ||
1205 | if (ReqCmd == READ) { | |
1206 | if (!read_track) { | |
1207 | void *addr; | |
1208 | addr = ATARIHW_PRESENT( EXTD_DMA ) ? ReqData : DMABuffer; | |
1209 | dma_cache_maintenance( virt_to_phys(addr), 512, 0 ); | |
1210 | if (!ATARIHW_PRESENT( EXTD_DMA )) | |
1211 | copy_buffer (addr, ReqData); | |
1212 | } else { | |
1213 | dma_cache_maintenance( PhysTrackBuffer, MaxSectors[DriveType] * 512, 0 ); | |
1214 | BufferDrive = SelectedDrive; | |
1215 | BufferSide = ReqSide; | |
1216 | BufferTrack = ReqTrack; | |
1217 | copy_buffer (SECTOR_BUFFER (ReqSector), ReqData); | |
1218 | } | |
1219 | } | |
1220 | ||
a336ca6f | 1221 | if (++ReqCnt < blk_rq_cur_sectors(fd_request)) { |
1da177e4 LT |
1222 | /* read next sector */ |
1223 | setup_req_params( SelectedDrive ); | |
1224 | do_fd_action( SelectedDrive ); | |
1225 | } | |
1226 | else { | |
1227 | /* all sectors finished */ | |
2a842aca | 1228 | fd_end_request_cur(BLK_STS_OK); |
1da177e4 LT |
1229 | } |
1230 | return; | |
1231 | ||
1232 | err_end: | |
1233 | BufferDrive = -1; | |
1234 | fd_error(); | |
1235 | } | |
1236 | ||
1237 | ||
1238 | static void fd_writetrack( void ) | |
1239 | { | |
1240 | unsigned long paddr, flags; | |
1241 | unsigned int track; | |
1242 | ||
1243 | DPRINT(("fd_writetrack() Tr=%d Si=%d\n", ReqTrack, ReqSide )); | |
1244 | ||
1245 | paddr = PhysTrackBuffer; | |
1246 | dma_cache_maintenance( paddr, BUFFER_SIZE, 1 ); | |
1247 | ||
1248 | fd_select_side( ReqSide ); | |
1249 | ||
1250 | /* Cheat for track if stretch != 0 */ | |
1251 | if (SUDT->stretch) { | |
1252 | track = FDC_READ( FDCREG_TRACK); | |
1253 | MFPDELAY(); | |
1254 | FDC_WRITE(FDCREG_TRACK,track >> SUDT->stretch); | |
1255 | } | |
1256 | udelay(40); | |
1257 | ||
1258 | /* Setup DMA */ | |
1259 | local_irq_save(flags); | |
1260 | dma_wd.dma_lo = (unsigned char)paddr; | |
1261 | MFPDELAY(); | |
1262 | paddr >>= 8; | |
1263 | dma_wd.dma_md = (unsigned char)paddr; | |
1264 | MFPDELAY(); | |
1265 | paddr >>= 8; | |
1266 | if (ATARIHW_PRESENT( EXTD_DMA )) | |
1267 | st_dma_ext_dmahi = (unsigned short)paddr; | |
1268 | else | |
1269 | dma_wd.dma_hi = (unsigned char)paddr; | |
1270 | MFPDELAY(); | |
1271 | local_irq_restore(flags); | |
1272 | ||
1273 | /* Clear FIFO and switch DMA to correct mode */ | |
1274 | dma_wd.dma_mode_status = 0x190; | |
1275 | MFPDELAY(); | |
1276 | dma_wd.dma_mode_status = 0x90; | |
1277 | MFPDELAY(); | |
1278 | dma_wd.dma_mode_status = 0x190; | |
1279 | MFPDELAY(); | |
1280 | ||
1281 | /* How many sectors for DMA */ | |
1282 | dma_wd.fdc_acces_seccount = BUFFER_SIZE/512; | |
1283 | udelay(40); | |
1284 | ||
1285 | /* Start operation */ | |
1286 | dma_wd.dma_mode_status = FDCSELREG_STP | 0x100; | |
1287 | udelay(40); | |
1288 | SET_IRQ_HANDLER( fd_writetrack_done ); | |
1289 | dma_wd.fdc_acces_seccount = FDCCMD_WRTRA | get_head_settle_flag(); | |
1290 | ||
1291 | MotorOn = 1; | |
1292 | start_timeout(); | |
1293 | /* wait for interrupt */ | |
1294 | } | |
1295 | ||
1296 | ||
1297 | static void fd_writetrack_done( int status ) | |
1298 | { | |
1299 | DPRINT(("fd_writetrack_done()\n")); | |
1300 | ||
1301 | stop_timeout(); | |
1302 | ||
1303 | if (status & FDCSTAT_WPROT) { | |
1304 | printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive ); | |
1305 | goto err_end; | |
1306 | } | |
1307 | if (status & FDCSTAT_LOST) { | |
1308 | printk(KERN_ERR "fd%d: lost data (side %d, track %d)\n", | |
1309 | SelectedDrive, ReqSide, ReqTrack ); | |
1310 | goto err_end; | |
1311 | } | |
1312 | ||
7b8a3d22 | 1313 | complete(&format_wait); |
1da177e4 LT |
1314 | return; |
1315 | ||
1316 | err_end: | |
1317 | fd_error(); | |
1318 | } | |
1319 | ||
24ed960a | 1320 | static void fd_times_out(struct timer_list *unused) |
1da177e4 LT |
1321 | { |
1322 | atari_disable_irq( IRQ_MFP_FDC ); | |
1323 | if (!FloppyIRQHandler) goto end; /* int occurred after timer was fired, but | |
1324 | * before we came here... */ | |
1325 | ||
1326 | SET_IRQ_HANDLER( NULL ); | |
1327 | /* If the timeout occurred while the readtrack_check timer was | |
1328 | * active, we need to cancel it, else bad things will happen */ | |
1329 | if (UseTrackbuffer) | |
1330 | del_timer( &readtrack_timer ); | |
1331 | FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI ); | |
1332 | udelay( 25 ); | |
1333 | ||
1334 | printk(KERN_ERR "floppy timeout\n" ); | |
1335 | fd_error(); | |
1336 | end: | |
1337 | atari_enable_irq( IRQ_MFP_FDC ); | |
1338 | } | |
1339 | ||
1340 | ||
1341 | /* The (noop) seek operation here is needed to make the WP bit in the | |
1342 | * FDC status register accessible for check_change. If the last disk | |
1343 | * operation would have been a RDSEC, this bit would always read as 0 | |
1344 | * no matter what :-( To save time, the seek goes to the track we're | |
1345 | * already on. | |
1346 | */ | |
1347 | ||
1348 | static void finish_fdc( void ) | |
1349 | { | |
1350 | if (!NeedSeek) { | |
1351 | finish_fdc_done( 0 ); | |
1352 | } | |
1353 | else { | |
1354 | DPRINT(("finish_fdc: dummy seek started\n")); | |
1355 | FDC_WRITE (FDCREG_DATA, SUD.track); | |
1356 | SET_IRQ_HANDLER( finish_fdc_done ); | |
1357 | FDC_WRITE (FDCREG_CMD, FDCCMD_SEEK); | |
1358 | MotorOn = 1; | |
1359 | start_timeout(); | |
1360 | /* we must wait for the IRQ here, because the ST-DMA | |
1361 | is released immediately afterwards and the interrupt | |
1362 | may be delivered to the wrong driver. */ | |
1363 | } | |
1364 | } | |
1365 | ||
1366 | ||
1367 | static void finish_fdc_done( int dummy ) | |
1368 | { | |
1369 | unsigned long flags; | |
1370 | ||
1371 | DPRINT(("finish_fdc_done entered\n")); | |
1372 | stop_timeout(); | |
1373 | NeedSeek = 0; | |
1374 | ||
1375 | if (timer_pending(&fd_timer) && time_before(fd_timer.expires, jiffies + 5)) | |
1376 | /* If the check for a disk change is done too early after this | |
1377 | * last seek command, the WP bit still reads wrong :-(( | |
1378 | */ | |
1379 | mod_timer(&fd_timer, jiffies + 5); | |
1380 | else | |
1381 | start_check_change_timer(); | |
1382 | start_motor_off_timer(); | |
1383 | ||
1384 | local_irq_save(flags); | |
1385 | stdma_release(); | |
1da177e4 LT |
1386 | local_irq_restore(flags); |
1387 | ||
1388 | DPRINT(("finish_fdc() finished\n")); | |
1389 | } | |
1390 | ||
1391 | /* The detection of disk changes is a dark chapter in Atari history :-( | |
1392 | * Because the "Drive ready" signal isn't present in the Atari | |
1393 | * hardware, one has to rely on the "Write Protect". This works fine, | |
1394 | * as long as no write protected disks are used. TOS solves this | |
1395 | * problem by introducing tri-state logic ("maybe changed") and | |
1396 | * looking at the serial number in block 0. This isn't possible for | |
1397 | * Linux, since the floppy driver can't make assumptions about the | |
1398 | * filesystem used on the disk and thus the contents of block 0. I've | |
1399 | * chosen the method to always say "The disk was changed" if it is | |
1400 | * unsure whether it was. This implies that every open or mount | |
1401 | * invalidates the disk buffers if you work with write protected | |
1402 | * disks. But at least this is better than working with incorrect data | |
1403 | * due to unrecognised disk changes. | |
1404 | */ | |
1405 | ||
1a8a74f0 TH |
1406 | static unsigned int floppy_check_events(struct gendisk *disk, |
1407 | unsigned int clearing) | |
1da177e4 LT |
1408 | { |
1409 | struct atari_floppy_struct *p = disk->private_data; | |
1410 | unsigned int drive = p - unit; | |
1411 | if (test_bit (drive, &fake_change)) { | |
1412 | /* simulated change (e.g. after formatting) */ | |
1a8a74f0 | 1413 | return DISK_EVENT_MEDIA_CHANGE; |
1da177e4 LT |
1414 | } |
1415 | if (test_bit (drive, &changed_floppies)) { | |
1416 | /* surely changed (the WP signal changed at least once) */ | |
1a8a74f0 | 1417 | return DISK_EVENT_MEDIA_CHANGE; |
1da177e4 LT |
1418 | } |
1419 | if (UD.wpstat) { | |
1420 | /* WP is on -> could be changed: to be sure, buffers should be | |
1421 | * invalidated... | |
1422 | */ | |
1a8a74f0 | 1423 | return DISK_EVENT_MEDIA_CHANGE; |
1da177e4 LT |
1424 | } |
1425 | ||
1426 | return 0; | |
1427 | } | |
1428 | ||
1429 | static int floppy_revalidate(struct gendisk *disk) | |
1430 | { | |
1431 | struct atari_floppy_struct *p = disk->private_data; | |
1432 | unsigned int drive = p - unit; | |
1433 | ||
1434 | if (test_bit(drive, &changed_floppies) || | |
1435 | test_bit(drive, &fake_change) || | |
1436 | p->disktype == 0) { | |
1437 | if (UD.flags & FTD_MSG) | |
1438 | printk(KERN_ERR "floppy: clear format %p!\n", UDT); | |
1439 | BufferDrive = -1; | |
1440 | clear_bit(drive, &fake_change); | |
1441 | clear_bit(drive, &changed_floppies); | |
1442 | /* MSch: clearing geometry makes sense only for autoprobe | |
1443 | formats, for 'permanent user-defined' parameter: | |
1444 | restore default_params[] here if flagged valid! */ | |
1445 | if (default_params[drive].blocks == 0) | |
2c7af511 | 1446 | UDT = NULL; |
1da177e4 LT |
1447 | else |
1448 | UDT = &default_params[drive]; | |
1449 | } | |
1450 | return 0; | |
1451 | } | |
1452 | ||
1453 | ||
1454 | /* This sets up the global variables describing the current request. */ | |
1455 | ||
1456 | static void setup_req_params( int drive ) | |
1457 | { | |
1458 | int block = ReqBlock + ReqCnt; | |
1459 | ||
1460 | ReqTrack = block / UDT->spt; | |
1461 | ReqSector = block - ReqTrack * UDT->spt + 1; | |
1462 | ReqSide = ReqTrack & 1; | |
1463 | ReqTrack >>= 1; | |
1464 | ReqData = ReqBuffer + 512 * ReqCnt; | |
1465 | ||
1466 | if (UseTrackbuffer) | |
c8e90782 | 1467 | read_track = (ReqCmd == READ && fd_request->error_count == 0); |
1da177e4 LT |
1468 | else |
1469 | read_track = 0; | |
1470 | ||
1471 | DPRINT(("Request params: Si=%d Tr=%d Se=%d Data=%08lx\n",ReqSide, | |
1472 | ReqTrack, ReqSector, (unsigned long)ReqData )); | |
1473 | } | |
1474 | ||
80ff2040 JA |
1475 | static void ataflop_commit_rqs(struct blk_mq_hw_ctx *hctx) |
1476 | { | |
1477 | spin_lock_irq(&ataflop_lock); | |
1478 | atari_disable_irq(IRQ_MFP_FDC); | |
1479 | finish_fdc(); | |
1480 | atari_enable_irq(IRQ_MFP_FDC); | |
1481 | spin_unlock_irq(&ataflop_lock); | |
1482 | } | |
1483 | ||
6ec3938c OS |
1484 | static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx, |
1485 | const struct blk_mq_queue_data *bd) | |
639e2f2a | 1486 | { |
6ec3938c OS |
1487 | struct atari_floppy_struct *floppy = bd->rq->rq_disk->private_data; |
1488 | int drive = floppy - unit; | |
1489 | int type = floppy->type; | |
1da177e4 | 1490 | |
6ec3938c OS |
1491 | spin_lock_irq(&ataflop_lock); |
1492 | if (fd_request) { | |
1493 | spin_unlock_irq(&ataflop_lock); | |
1494 | return BLK_STS_DEV_RESOURCE; | |
1495 | } | |
1496 | if (!stdma_try_lock(floppy_irq, NULL)) { | |
1497 | spin_unlock_irq(&ataflop_lock); | |
1498 | return BLK_STS_RESOURCE; | |
1499 | } | |
1500 | fd_request = bd->rq; | |
1501 | blk_mq_start_request(fd_request); | |
1da177e4 | 1502 | |
6ec3938c | 1503 | atari_disable_irq( IRQ_MFP_FDC ); |
1da177e4 LT |
1504 | |
1505 | IsFormatting = 0; | |
1506 | ||
1da177e4 LT |
1507 | if (!UD.connected) { |
1508 | /* drive not connected */ | |
1509 | printk(KERN_ERR "Unknown Device: fd%d\n", drive ); | |
2a842aca | 1510 | fd_end_request_cur(BLK_STS_IOERR); |
6ec3938c | 1511 | goto out; |
1da177e4 LT |
1512 | } |
1513 | ||
1514 | if (type == 0) { | |
1515 | if (!UDT) { | |
1516 | Probing = 1; | |
5ceadd2a | 1517 | UDT = atari_disk_type + StartDiskType[DriveType]; |
1da177e4 LT |
1518 | set_capacity(floppy->disk, UDT->blocks); |
1519 | UD.autoprobe = 1; | |
1520 | } | |
1521 | } | |
1522 | else { | |
1523 | /* user supplied disk type */ | |
1524 | if (--type >= NUM_DISK_MINORS) { | |
1525 | printk(KERN_WARNING "fd%d: invalid disk format", drive ); | |
2a842aca | 1526 | fd_end_request_cur(BLK_STS_IOERR); |
6ec3938c | 1527 | goto out; |
1da177e4 LT |
1528 | } |
1529 | if (minor2disktype[type].drive_types > DriveType) { | |
1530 | printk(KERN_WARNING "fd%d: unsupported disk format", drive ); | |
2a842aca | 1531 | fd_end_request_cur(BLK_STS_IOERR); |
6ec3938c | 1532 | goto out; |
1da177e4 LT |
1533 | } |
1534 | type = minor2disktype[type].index; | |
5ceadd2a | 1535 | UDT = &atari_disk_type[type]; |
1da177e4 LT |
1536 | set_capacity(floppy->disk, UDT->blocks); |
1537 | UD.autoprobe = 0; | |
1538 | } | |
1da177e4 LT |
1539 | |
1540 | /* stop deselect timer */ | |
1541 | del_timer( &motor_off_timer ); | |
1542 | ||
1543 | ReqCnt = 0; | |
a336ca6f TH |
1544 | ReqCmd = rq_data_dir(fd_request); |
1545 | ReqBlock = blk_rq_pos(fd_request); | |
b4f42e28 | 1546 | ReqBuffer = bio_data(fd_request->bio); |
1da177e4 LT |
1547 | setup_req_params( drive ); |
1548 | do_fd_action( drive ); | |
1549 | ||
6ec3938c OS |
1550 | if (bd->last) |
1551 | finish_fdc(); | |
1da177e4 | 1552 | atari_enable_irq( IRQ_MFP_FDC ); |
6ec3938c OS |
1553 | |
1554 | out: | |
1555 | spin_unlock_irq(&ataflop_lock); | |
1556 | return BLK_STS_OK; | |
1da177e4 LT |
1557 | } |
1558 | ||
8a6cfeb6 | 1559 | static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, |
1da177e4 LT |
1560 | unsigned int cmd, unsigned long param) |
1561 | { | |
60ad2340 | 1562 | struct gendisk *disk = bdev->bd_disk; |
1da177e4 LT |
1563 | struct atari_floppy_struct *floppy = disk->private_data; |
1564 | int drive = floppy - unit; | |
1565 | int type = floppy->type; | |
1566 | struct atari_format_descr fmt_desc; | |
1567 | struct atari_disk_type *dtp; | |
1568 | struct floppy_struct getprm; | |
1569 | int settype; | |
1570 | struct floppy_struct setprm; | |
2c7af511 | 1571 | void __user *argp = (void __user *)param; |
1da177e4 LT |
1572 | |
1573 | switch (cmd) { | |
1574 | case FDGETPRM: | |
1575 | if (type) { | |
1576 | if (--type >= NUM_DISK_MINORS) | |
1577 | return -ENODEV; | |
1578 | if (minor2disktype[type].drive_types > DriveType) | |
1579 | return -ENODEV; | |
1580 | type = minor2disktype[type].index; | |
5ceadd2a | 1581 | dtp = &atari_disk_type[type]; |
1da177e4 LT |
1582 | if (UD.flags & FTD_MSG) |
1583 | printk (KERN_ERR "floppy%d: found dtp %p name %s!\n", | |
1584 | drive, dtp, dtp->name); | |
1585 | } | |
1586 | else { | |
1587 | if (!UDT) | |
1588 | return -ENXIO; | |
1589 | else | |
1590 | dtp = UDT; | |
1591 | } | |
1592 | memset((void *)&getprm, 0, sizeof(getprm)); | |
1593 | getprm.size = dtp->blocks; | |
1594 | getprm.sect = dtp->spt; | |
1595 | getprm.head = 2; | |
1596 | getprm.track = dtp->blocks/dtp->spt/2; | |
1597 | getprm.stretch = dtp->stretch; | |
2c7af511 | 1598 | if (copy_to_user(argp, &getprm, sizeof(getprm))) |
1da177e4 LT |
1599 | return -EFAULT; |
1600 | return 0; | |
1601 | } | |
1602 | switch (cmd) { | |
1603 | case FDSETPRM: | |
1604 | case FDDEFPRM: | |
1605 | /* | |
1606 | * MSch 7/96: simple 'set geometry' case: just set the | |
1607 | * 'default' device params (minor == 0). | |
1608 | * Currently, the drive geometry is cleared after each | |
1609 | * disk change and subsequent revalidate()! simple | |
1610 | * implementation of FDDEFPRM: save geometry from a | |
1611 | * FDDEFPRM call and restore it in floppy_revalidate() ! | |
1612 | */ | |
1613 | ||
1614 | /* get the parameters from user space */ | |
1615 | if (floppy->ref != 1 && floppy->ref != -1) | |
1616 | return -EBUSY; | |
2c7af511 | 1617 | if (copy_from_user(&setprm, argp, sizeof(setprm))) |
1da177e4 LT |
1618 | return -EFAULT; |
1619 | /* | |
1620 | * first of all: check for floppy change and revalidate, | |
1621 | * or the next access will revalidate - and clear UDT :-( | |
1622 | */ | |
1623 | ||
1a8a74f0 | 1624 | if (floppy_check_events(disk, 0)) |
1da177e4 LT |
1625 | floppy_revalidate(disk); |
1626 | ||
1627 | if (UD.flags & FTD_MSG) | |
1628 | printk (KERN_INFO "floppy%d: setting size %d spt %d str %d!\n", | |
1629 | drive, setprm.size, setprm.sect, setprm.stretch); | |
1630 | ||
1631 | /* what if type > 0 here? Overwrite specified entry ? */ | |
1632 | if (type) { | |
1633 | /* refuse to re-set a predefined type for now */ | |
1da177e4 LT |
1634 | return -EINVAL; |
1635 | } | |
1636 | ||
1637 | /* | |
1638 | * type == 0: first look for a matching entry in the type list, | |
1639 | * and set the UD.disktype field to use the perdefined entry. | |
1640 | * TODO: add user-defined format to head of autoprobe list ? | |
1641 | * Useful to include the user-type for future autodetection! | |
1642 | */ | |
1643 | ||
1644 | for (settype = 0; settype < NUM_DISK_MINORS; settype++) { | |
1645 | int setidx = 0; | |
1646 | if (minor2disktype[settype].drive_types > DriveType) { | |
1647 | /* skip this one, invalid for drive ... */ | |
1648 | continue; | |
1649 | } | |
1650 | setidx = minor2disktype[settype].index; | |
5ceadd2a | 1651 | dtp = &atari_disk_type[setidx]; |
1da177e4 LT |
1652 | |
1653 | /* found matching entry ?? */ | |
1654 | if ( dtp->blocks == setprm.size | |
1655 | && dtp->spt == setprm.sect | |
1656 | && dtp->stretch == setprm.stretch ) { | |
1657 | if (UD.flags & FTD_MSG) | |
1658 | printk (KERN_INFO "floppy%d: setting %s %p!\n", | |
1659 | drive, dtp->name, dtp); | |
1660 | UDT = dtp; | |
1661 | set_capacity(floppy->disk, UDT->blocks); | |
1662 | ||
1663 | if (cmd == FDDEFPRM) { | |
1664 | /* save settings as permanent default type */ | |
1665 | default_params[drive].name = dtp->name; | |
1666 | default_params[drive].spt = dtp->spt; | |
1667 | default_params[drive].blocks = dtp->blocks; | |
1668 | default_params[drive].fdc_speed = dtp->fdc_speed; | |
1669 | default_params[drive].stretch = dtp->stretch; | |
1670 | } | |
1671 | ||
1672 | return 0; | |
1673 | } | |
1674 | ||
1675 | } | |
1676 | ||
1677 | /* no matching disk type found above - setting user_params */ | |
1678 | ||
1679 | if (cmd == FDDEFPRM) { | |
1680 | /* set permanent type */ | |
1681 | dtp = &default_params[drive]; | |
1682 | } else | |
1683 | /* set user type (reset by disk change!) */ | |
1684 | dtp = &user_params[drive]; | |
1685 | ||
1686 | dtp->name = "user format"; | |
1687 | dtp->blocks = setprm.size; | |
1688 | dtp->spt = setprm.sect; | |
1689 | if (setprm.sect > 14) | |
1690 | dtp->fdc_speed = 3; | |
1691 | else | |
1692 | dtp->fdc_speed = 0; | |
1693 | dtp->stretch = setprm.stretch; | |
1694 | ||
1695 | if (UD.flags & FTD_MSG) | |
1696 | printk (KERN_INFO "floppy%d: blk %d spt %d str %d!\n", | |
1697 | drive, dtp->blocks, dtp->spt, dtp->stretch); | |
1698 | ||
1699 | /* sanity check */ | |
8f474287 | 1700 | if (setprm.track != dtp->blocks/dtp->spt/2 || |
6ec3938c | 1701 | setprm.head != 2) |
1da177e4 | 1702 | return -EINVAL; |
1da177e4 LT |
1703 | |
1704 | UDT = dtp; | |
1705 | set_capacity(floppy->disk, UDT->blocks); | |
1706 | ||
1707 | return 0; | |
1708 | case FDMSGON: | |
1709 | UD.flags |= FTD_MSG; | |
1710 | return 0; | |
1711 | case FDMSGOFF: | |
1712 | UD.flags &= ~FTD_MSG; | |
1713 | return 0; | |
1714 | case FDSETEMSGTRESH: | |
1715 | return -EINVAL; | |
1716 | case FDFMTBEG: | |
1717 | return 0; | |
1718 | case FDFMTTRK: | |
1719 | if (floppy->ref != 1 && floppy->ref != -1) | |
1720 | return -EBUSY; | |
2c7af511 | 1721 | if (copy_from_user(&fmt_desc, argp, sizeof(fmt_desc))) |
1da177e4 LT |
1722 | return -EFAULT; |
1723 | return do_format(drive, type, &fmt_desc); | |
1724 | case FDCLRPRM: | |
1725 | UDT = NULL; | |
1726 | /* MSch: invalidate default_params */ | |
1727 | default_params[drive].blocks = 0; | |
1728 | set_capacity(floppy->disk, MAX_DISK_SIZE * 2); | |
df561f66 | 1729 | fallthrough; |
1da177e4 LT |
1730 | case FDFMTEND: |
1731 | case FDFLUSH: | |
1732 | /* invalidate the buffer track to force a reread */ | |
1733 | BufferDrive = -1; | |
1734 | set_bit(drive, &fake_change); | |
22f97164 CH |
1735 | if (bdev_check_media_change(bdev)) |
1736 | floppy_revalidate(bdev->bd_disk); | |
1da177e4 LT |
1737 | return 0; |
1738 | default: | |
1739 | return -EINVAL; | |
1740 | } | |
1741 | } | |
1742 | ||
8a6cfeb6 AB |
1743 | static int fd_ioctl(struct block_device *bdev, fmode_t mode, |
1744 | unsigned int cmd, unsigned long arg) | |
1745 | { | |
1746 | int ret; | |
1747 | ||
2a48fc0a | 1748 | mutex_lock(&ataflop_mutex); |
8a6cfeb6 | 1749 | ret = fd_locked_ioctl(bdev, mode, cmd, arg); |
2a48fc0a | 1750 | mutex_unlock(&ataflop_mutex); |
8a6cfeb6 AB |
1751 | |
1752 | return ret; | |
1753 | } | |
1da177e4 LT |
1754 | |
1755 | /* Initialize the 'unit' variable for drive 'drive' */ | |
1756 | ||
1757 | static void __init fd_probe( int drive ) | |
1758 | { | |
1759 | UD.connected = 0; | |
1760 | UDT = NULL; | |
1761 | ||
1762 | if (!fd_test_drive_present( drive )) | |
1763 | return; | |
1764 | ||
1765 | UD.connected = 1; | |
1766 | UD.track = 0; | |
1767 | switch( UserSteprate[drive] ) { | |
1768 | case 2: | |
1769 | UD.steprate = FDCSTEP_2; | |
1770 | break; | |
1771 | case 3: | |
1772 | UD.steprate = FDCSTEP_3; | |
1773 | break; | |
1774 | case 6: | |
1775 | UD.steprate = FDCSTEP_6; | |
1776 | break; | |
1777 | case 12: | |
1778 | UD.steprate = FDCSTEP_12; | |
1779 | break; | |
1780 | default: /* should be -1 for "not set by user" */ | |
1781 | if (ATARIHW_PRESENT( FDCSPEED ) || MACH_IS_MEDUSA) | |
1782 | UD.steprate = FDCSTEP_3; | |
1783 | else | |
1784 | UD.steprate = FDCSTEP_6; | |
1785 | break; | |
1786 | } | |
1787 | MotorOn = 1; /* from probe restore operation! */ | |
1788 | } | |
1789 | ||
1790 | ||
1791 | /* This function tests the physical presence of a floppy drive (not | |
1792 | * whether a disk is inserted). This is done by issuing a restore | |
1793 | * command, waiting max. 2 seconds (that should be enough to move the | |
1794 | * head across the whole disk) and looking at the state of the "TR00" | |
1795 | * signal. This should now be raised if there is a drive connected | |
1796 | * (and there is no hardware failure :-) Otherwise, the drive is | |
1797 | * declared absent. | |
1798 | */ | |
1799 | ||
1800 | static int __init fd_test_drive_present( int drive ) | |
1801 | { | |
1802 | unsigned long timeout; | |
1803 | unsigned char status; | |
1804 | int ok; | |
1805 | ||
1806 | if (drive >= (MACH_IS_FALCON ? 1 : 2)) return( 0 ); | |
1807 | fd_select_drive( drive ); | |
1808 | ||
1809 | /* disable interrupt temporarily */ | |
1810 | atari_turnoff_irq( IRQ_MFP_FDC ); | |
1811 | FDC_WRITE (FDCREG_TRACK, 0xff00); | |
1812 | FDC_WRITE( FDCREG_CMD, FDCCMD_RESTORE | FDCCMDADD_H | FDCSTEP_6 ); | |
1813 | ||
1814 | timeout = jiffies + 2*HZ+HZ/2; | |
1815 | while (time_before(jiffies, timeout)) | |
3d92e8f3 | 1816 | if (!(st_mfp.par_dt_reg & 0x20)) |
1da177e4 LT |
1817 | break; |
1818 | ||
1819 | status = FDC_READ( FDCREG_STATUS ); | |
1820 | ok = (status & FDCSTAT_TR00) != 0; | |
1821 | ||
1822 | /* force interrupt to abort restore operation (FDC would try | |
1823 | * about 50 seconds!) */ | |
1824 | FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI ); | |
1825 | udelay(500); | |
1826 | status = FDC_READ( FDCREG_STATUS ); | |
1827 | udelay(20); | |
1828 | ||
1829 | if (ok) { | |
1830 | /* dummy seek command to make WP bit accessible */ | |
1831 | FDC_WRITE( FDCREG_DATA, 0 ); | |
1832 | FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK ); | |
3d92e8f3 | 1833 | while( st_mfp.par_dt_reg & 0x20 ) |
1da177e4 LT |
1834 | ; |
1835 | status = FDC_READ( FDCREG_STATUS ); | |
1836 | } | |
1837 | ||
1838 | atari_turnon_irq( IRQ_MFP_FDC ); | |
1839 | return( ok ); | |
1840 | } | |
1841 | ||
1842 | ||
1843 | /* Look how many and which kind of drives are connected. If there are | |
1844 | * floppies, additionally start the disk-change and motor-off timers. | |
1845 | */ | |
1846 | ||
1847 | static void __init config_types( void ) | |
1848 | { | |
1849 | int drive, cnt = 0; | |
1850 | ||
1851 | /* for probing drives, set the FDC speed to 8 MHz */ | |
1852 | if (ATARIHW_PRESENT(FDCSPEED)) | |
1853 | dma_wd.fdc_speed = 0; | |
1854 | ||
1855 | printk(KERN_INFO "Probing floppy drive(s):\n"); | |
1856 | for( drive = 0; drive < FD_MAX_UNITS; drive++ ) { | |
1857 | fd_probe( drive ); | |
1858 | if (UD.connected) { | |
1859 | printk(KERN_INFO "fd%d\n", drive); | |
1860 | ++cnt; | |
1861 | } | |
1862 | } | |
1863 | ||
1864 | if (FDC_READ( FDCREG_STATUS ) & FDCSTAT_BUSY) { | |
1865 | /* If FDC is still busy from probing, give it another FORCI | |
1866 | * command to abort the operation. If this isn't done, the FDC | |
1867 | * will interrupt later and its IRQ line stays low, because | |
1868 | * the status register isn't read. And this will block any | |
1869 | * interrupts on this IRQ line :-( | |
1870 | */ | |
1871 | FDC_WRITE( FDCREG_CMD, FDCCMD_FORCI ); | |
1872 | udelay(500); | |
1873 | FDC_READ( FDCREG_STATUS ); | |
1874 | udelay(20); | |
1875 | } | |
1876 | ||
1877 | if (cnt > 0) { | |
1878 | start_motor_off_timer(); | |
1879 | if (cnt == 1) fd_select_drive( 0 ); | |
1880 | start_check_change_timer(); | |
1881 | } | |
1882 | } | |
1883 | ||
1884 | /* | |
1885 | * floppy_open check for aliasing (/dev/fd0 can be the same as | |
1886 | * /dev/PS0 etc), and disallows simultaneous access to the same | |
1887 | * drive with different device numbers. | |
1888 | */ | |
1889 | ||
60ad2340 | 1890 | static int floppy_open(struct block_device *bdev, fmode_t mode) |
1da177e4 | 1891 | { |
60ad2340 AV |
1892 | struct atari_floppy_struct *p = bdev->bd_disk->private_data; |
1893 | int type = MINOR(bdev->bd_dev) >> 2; | |
1da177e4 LT |
1894 | |
1895 | DPRINT(("fd_open: type=%d\n",type)); | |
1896 | if (p->ref && p->type != type) | |
1897 | return -EBUSY; | |
1898 | ||
60ad2340 | 1899 | if (p->ref == -1 || (p->ref && mode & FMODE_EXCL)) |
1da177e4 LT |
1900 | return -EBUSY; |
1901 | ||
60ad2340 | 1902 | if (mode & FMODE_EXCL) |
1da177e4 LT |
1903 | p->ref = -1; |
1904 | else | |
1905 | p->ref++; | |
1906 | ||
1907 | p->type = type; | |
1908 | ||
60ad2340 | 1909 | if (mode & FMODE_NDELAY) |
1da177e4 LT |
1910 | return 0; |
1911 | ||
60ad2340 | 1912 | if (mode & (FMODE_READ|FMODE_WRITE)) { |
22f97164 CH |
1913 | if (bdev_check_media_change(bdev)) |
1914 | floppy_revalidate(bdev->bd_disk); | |
60ad2340 | 1915 | if (mode & FMODE_WRITE) { |
1da177e4 LT |
1916 | if (p->wpstat) { |
1917 | if (p->ref < 0) | |
1918 | p->ref = 0; | |
1919 | else | |
1920 | p->ref--; | |
1da177e4 LT |
1921 | return -EROFS; |
1922 | } | |
1923 | } | |
1924 | } | |
1925 | return 0; | |
1926 | } | |
1927 | ||
6e9624b8 AB |
1928 | static int floppy_unlocked_open(struct block_device *bdev, fmode_t mode) |
1929 | { | |
1930 | int ret; | |
1931 | ||
2a48fc0a | 1932 | mutex_lock(&ataflop_mutex); |
6e9624b8 | 1933 | ret = floppy_open(bdev, mode); |
2a48fc0a | 1934 | mutex_unlock(&ataflop_mutex); |
6e9624b8 AB |
1935 | |
1936 | return ret; | |
1937 | } | |
1da177e4 | 1938 | |
db2a144b | 1939 | static void floppy_release(struct gendisk *disk, fmode_t mode) |
1da177e4 | 1940 | { |
60ad2340 | 1941 | struct atari_floppy_struct *p = disk->private_data; |
2a48fc0a | 1942 | mutex_lock(&ataflop_mutex); |
1da177e4 LT |
1943 | if (p->ref < 0) |
1944 | p->ref = 0; | |
1945 | else if (!p->ref--) { | |
1946 | printk(KERN_ERR "floppy_release with fd_ref == 0"); | |
1947 | p->ref = 0; | |
1948 | } | |
2a48fc0a | 1949 | mutex_unlock(&ataflop_mutex); |
1da177e4 LT |
1950 | } |
1951 | ||
83d5cde4 | 1952 | static const struct block_device_operations floppy_fops = { |
1da177e4 | 1953 | .owner = THIS_MODULE, |
6e9624b8 | 1954 | .open = floppy_unlocked_open, |
60ad2340 | 1955 | .release = floppy_release, |
8a6cfeb6 | 1956 | .ioctl = fd_ioctl, |
1a8a74f0 | 1957 | .check_events = floppy_check_events, |
1da177e4 LT |
1958 | }; |
1959 | ||
6ec3938c OS |
1960 | static const struct blk_mq_ops ataflop_mq_ops = { |
1961 | .queue_rq = ataflop_queue_rq, | |
80ff2040 | 1962 | .commit_rqs = ataflop_commit_rqs, |
6ec3938c OS |
1963 | }; |
1964 | ||
1da177e4 LT |
1965 | static struct kobject *floppy_find(dev_t dev, int *part, void *data) |
1966 | { | |
1967 | int drive = *part & 3; | |
1968 | int type = *part >> 2; | |
1969 | if (drive >= FD_MAX_UNITS || type > NUM_DISK_MINORS) | |
1970 | return NULL; | |
1971 | *part = 0; | |
3079c22e | 1972 | return get_disk_and_module(unit[drive].disk); |
1da177e4 LT |
1973 | } |
1974 | ||
1975 | static int __init atari_floppy_init (void) | |
1976 | { | |
1977 | int i; | |
6ec3938c | 1978 | int ret; |
1da177e4 LT |
1979 | |
1980 | if (!MACH_IS_ATARI) | |
1981 | /* Amiga, Mac, ... don't have Atari-compatible floppy :-) */ | |
e945b568 | 1982 | return -ENODEV; |
1da177e4 | 1983 | |
1da177e4 LT |
1984 | if (register_blkdev(FLOPPY_MAJOR,"fd")) |
1985 | return -EBUSY; | |
1986 | ||
1987 | for (i = 0; i < FD_MAX_UNITS; i++) { | |
1988 | unit[i].disk = alloc_disk(1); | |
6ec3938c OS |
1989 | if (!unit[i].disk) { |
1990 | ret = -ENOMEM; | |
1991 | goto err; | |
1992 | } | |
71327f54 | 1993 | |
6ec3938c OS |
1994 | unit[i].disk->queue = blk_mq_init_sq_queue(&unit[i].tag_set, |
1995 | &ataflop_mq_ops, 2, | |
1996 | BLK_MQ_F_SHOULD_MERGE); | |
1997 | if (IS_ERR(unit[i].disk->queue)) { | |
49379e6d | 1998 | put_disk(unit[i].disk); |
6ec3938c OS |
1999 | ret = PTR_ERR(unit[i].disk->queue); |
2000 | unit[i].disk->queue = NULL; | |
2001 | goto err; | |
2002 | } | |
1da177e4 LT |
2003 | } |
2004 | ||
2005 | if (UseTrackbuffer < 0) | |
2006 | /* not set by user -> use default: for now, we turn | |
2007 | track buffering off for all Medusas, though it | |
2008 | could be used with ones that have a counter | |
2009 | card. But the test is too hard :-( */ | |
2010 | UseTrackbuffer = !MACH_IS_MEDUSA; | |
2011 | ||
2012 | /* initialize variables */ | |
2013 | SelectedDrive = -1; | |
2014 | BufferDrive = -1; | |
2015 | ||
2016 | DMABuffer = atari_stram_alloc(BUFFER_SIZE+512, "ataflop"); | |
2017 | if (!DMABuffer) { | |
2018 | printk(KERN_ERR "atari_floppy_init: cannot get dma buffer\n"); | |
6ec3938c OS |
2019 | ret = -ENOMEM; |
2020 | goto err; | |
1da177e4 LT |
2021 | } |
2022 | TrackBuffer = DMABuffer + 512; | |
a4de73fb | 2023 | PhysDMABuffer = atari_stram_to_phys(DMABuffer); |
1da177e4 LT |
2024 | PhysTrackBuffer = virt_to_phys(TrackBuffer); |
2025 | BufferDrive = BufferSide = BufferTrack = -1; | |
2026 | ||
1da177e4 LT |
2027 | for (i = 0; i < FD_MAX_UNITS; i++) { |
2028 | unit[i].track = -1; | |
2029 | unit[i].flags = 0; | |
2030 | unit[i].disk->major = FLOPPY_MAJOR; | |
2031 | unit[i].disk->first_minor = i; | |
2032 | sprintf(unit[i].disk->disk_name, "fd%d", i); | |
2033 | unit[i].disk->fops = &floppy_fops; | |
773008f6 | 2034 | unit[i].disk->events = DISK_EVENT_MEDIA_CHANGE; |
1da177e4 | 2035 | unit[i].disk->private_data = &unit[i]; |
1da177e4 LT |
2036 | set_capacity(unit[i].disk, MAX_DISK_SIZE * 2); |
2037 | add_disk(unit[i].disk); | |
2038 | } | |
2039 | ||
2040 | blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE, | |
2041 | floppy_find, NULL, NULL); | |
2042 | ||
2043 | printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n", | |
2044 | DriveType == 0 ? 'D' : DriveType == 1 ? 'H' : 'E', | |
2045 | UseTrackbuffer ? "" : "no "); | |
2046 | config_types(); | |
2047 | ||
2048 | return 0; | |
6ec3938c OS |
2049 | |
2050 | err: | |
49379e6d | 2051 | while (--i >= 0) { |
71327f54 | 2052 | struct gendisk *disk = unit[i].disk; |
639e2f2a | 2053 | |
49379e6d DC |
2054 | blk_cleanup_queue(disk->queue); |
2055 | blk_mq_free_tag_set(&unit[i].tag_set); | |
2056 | put_disk(unit[i].disk); | |
2057 | } | |
639e2f2a | 2058 | |
1da177e4 | 2059 | unregister_blkdev(FLOPPY_MAJOR, "fd"); |
6ec3938c | 2060 | return ret; |
1da177e4 LT |
2061 | } |
2062 | ||
63907435 AV |
2063 | #ifndef MODULE |
2064 | static int __init atari_floppy_setup(char *str) | |
1da177e4 | 2065 | { |
63907435 | 2066 | int ints[3 + FD_MAX_UNITS]; |
1da177e4 | 2067 | int i; |
63907435 AV |
2068 | |
2069 | if (!MACH_IS_ATARI) | |
2070 | return 0; | |
2071 | ||
2072 | str = get_options(str, 3 + FD_MAX_UNITS, ints); | |
1da177e4 LT |
2073 | |
2074 | if (ints[0] < 1) { | |
2075 | printk(KERN_ERR "ataflop_setup: no arguments!\n" ); | |
63907435 | 2076 | return 0; |
1da177e4 LT |
2077 | } |
2078 | else if (ints[0] > 2+FD_MAX_UNITS) { | |
2079 | printk(KERN_ERR "ataflop_setup: too many arguments\n" ); | |
2080 | } | |
2081 | ||
2082 | if (ints[1] < 0 || ints[1] > 2) | |
2083 | printk(KERN_ERR "ataflop_setup: bad drive type\n" ); | |
2084 | else | |
2085 | DriveType = ints[1]; | |
2086 | ||
2087 | if (ints[0] >= 2) | |
2088 | UseTrackbuffer = (ints[2] > 0); | |
2089 | ||
2090 | for( i = 3; i <= ints[0] && i-3 < FD_MAX_UNITS; ++i ) { | |
2091 | if (ints[i] != 2 && ints[i] != 3 && ints[i] != 6 && ints[i] != 12) | |
2092 | printk(KERN_ERR "ataflop_setup: bad steprate\n" ); | |
2093 | else | |
2094 | UserSteprate[i-3] = ints[i]; | |
2095 | } | |
63907435 | 2096 | return 1; |
1da177e4 LT |
2097 | } |
2098 | ||
63907435 AV |
2099 | __setup("floppy=", atari_floppy_setup); |
2100 | #endif | |
2101 | ||
2102 | static void __exit atari_floppy_exit(void) | |
1da177e4 LT |
2103 | { |
2104 | int i; | |
2105 | blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); | |
2106 | for (i = 0; i < FD_MAX_UNITS; i++) { | |
2107 | del_gendisk(unit[i].disk); | |
6ec3938c OS |
2108 | blk_cleanup_queue(unit[i].disk->queue); |
2109 | blk_mq_free_tag_set(&unit[i].tag_set); | |
1da177e4 LT |
2110 | put_disk(unit[i].disk); |
2111 | } | |
2112 | unregister_blkdev(FLOPPY_MAJOR, "fd"); | |
2113 | ||
1da177e4 LT |
2114 | del_timer_sync(&fd_timer); |
2115 | atari_stram_free( DMABuffer ); | |
2116 | } | |
2117 | ||
2118 | module_init(atari_floppy_init) | |
2119 | module_exit(atari_floppy_exit) | |
2120 | ||
2121 | MODULE_LICENSE("GPL"); |