Commit | Line | Data |
---|---|---|
c82ee6d3 | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
1da177e4 LT |
2 | /* |
3 | * sata_svw.c - ServerWorks / Apple K2 SATA | |
4 | * | |
5 | * Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and | |
6 | * Jeff Garzik <jgarzik@pobox.com> | |
7 | * Please ALWAYS copy linux-ide@vger.kernel.org | |
8 | * on emails. | |
9 | * | |
10 | * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> | |
11 | * | |
12 | * Bits from Jeff Garzik, Copyright RedHat, Inc. | |
13 | * | |
14 | * This driver probably works with non-Apple versions of the | |
15 | * Broadcom chipset... | |
16 | * | |
af36d7f0 | 17 | * libata documentation is available via 'make {ps|pdf}docs', |
19285f3c | 18 | * as Documentation/driver-api/libata.rst |
af36d7f0 JG |
19 | * |
20 | * Hardware documentation available under NDA. | |
1da177e4 LT |
21 | */ |
22 | ||
1da177e4 LT |
23 | #include <linux/kernel.h> |
24 | #include <linux/module.h> | |
25 | #include <linux/pci.h> | |
1da177e4 LT |
26 | #include <linux/blkdev.h> |
27 | #include <linux/delay.h> | |
28 | #include <linux/interrupt.h> | |
a9524a76 | 29 | #include <linux/device.h> |
1da177e4 | 30 | #include <scsi/scsi_host.h> |
931506d3 AS |
31 | #include <scsi/scsi_cmnd.h> |
32 | #include <scsi/scsi.h> | |
1da177e4 | 33 | #include <linux/libata.h> |
d610f503 | 34 | #include <linux/of.h> |
1da177e4 LT |
35 | |
36 | #define DRV_NAME "sata_svw" | |
2a3103ce | 37 | #define DRV_VERSION "2.3" |
1da177e4 | 38 | |
55cca65e | 39 | enum { |
4447d351 TH |
40 | /* ap->flags bits */ |
41 | K2_FLAG_SATA_8_PORTS = (1 << 24), | |
42 | K2_FLAG_NO_ATAPI_DMA = (1 << 25), | |
931506d3 | 43 | K2_FLAG_BAR_POS_3 = (1 << 26), |
c10340ac | 44 | |
55cca65e JG |
45 | /* Taskfile registers offsets */ |
46 | K2_SATA_TF_CMD_OFFSET = 0x00, | |
47 | K2_SATA_TF_DATA_OFFSET = 0x00, | |
48 | K2_SATA_TF_ERROR_OFFSET = 0x04, | |
49 | K2_SATA_TF_NSECT_OFFSET = 0x08, | |
50 | K2_SATA_TF_LBAL_OFFSET = 0x0c, | |
51 | K2_SATA_TF_LBAM_OFFSET = 0x10, | |
52 | K2_SATA_TF_LBAH_OFFSET = 0x14, | |
53 | K2_SATA_TF_DEVICE_OFFSET = 0x18, | |
54 | K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, | |
55 | K2_SATA_TF_CTL_OFFSET = 0x20, | |
1da177e4 | 56 | |
55cca65e JG |
57 | /* DMA base */ |
58 | K2_SATA_DMA_CMD_OFFSET = 0x30, | |
1da177e4 | 59 | |
55cca65e JG |
60 | /* SCRs base */ |
61 | K2_SATA_SCR_STATUS_OFFSET = 0x40, | |
62 | K2_SATA_SCR_ERROR_OFFSET = 0x44, | |
63 | K2_SATA_SCR_CONTROL_OFFSET = 0x48, | |
1da177e4 | 64 | |
55cca65e JG |
65 | /* Others */ |
66 | K2_SATA_SICR1_OFFSET = 0x80, | |
67 | K2_SATA_SICR2_OFFSET = 0x84, | |
68 | K2_SATA_SIM_OFFSET = 0x88, | |
1da177e4 | 69 | |
55cca65e JG |
70 | /* Port stride */ |
71 | K2_SATA_PORT_OFFSET = 0x100, | |
c10340ac | 72 | |
931506d3 AS |
73 | chip_svw4 = 0, |
74 | chip_svw8 = 1, | |
75 | chip_svw42 = 2, /* bar 3 */ | |
76 | chip_svw43 = 3, /* bar 5 */ | |
c10340ac JG |
77 | }; |
78 | ||
ac19bff2 JG |
79 | static u8 k2_stat_check_status(struct ata_port *ap); |
80 | ||
1da177e4 | 81 | |
c10340ac JG |
82 | static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) |
83 | { | |
931506d3 AS |
84 | u8 cmnd = qc->scsicmd->cmnd[0]; |
85 | ||
c10340ac JG |
86 | if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) |
87 | return -1; /* ATAPI DMA not supported */ | |
931506d3 AS |
88 | else { |
89 | switch (cmnd) { | |
90 | case READ_10: | |
91 | case READ_12: | |
92 | case READ_16: | |
93 | case WRITE_10: | |
94 | case WRITE_12: | |
95 | case WRITE_16: | |
96 | return 0; | |
97 | ||
98 | default: | |
99 | return -1; | |
100 | } | |
c10340ac | 101 | |
931506d3 | 102 | } |
c10340ac JG |
103 | } |
104 | ||
82ef04fb TH |
105 | static int k2_sata_scr_read(struct ata_link *link, |
106 | unsigned int sc_reg, u32 *val) | |
1da177e4 LT |
107 | { |
108 | if (sc_reg > SCR_CONTROL) | |
da3dbb17 | 109 | return -EINVAL; |
82ef04fb | 110 | *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); |
da3dbb17 | 111 | return 0; |
1da177e4 LT |
112 | } |
113 | ||
114 | ||
82ef04fb TH |
115 | static int k2_sata_scr_write(struct ata_link *link, |
116 | unsigned int sc_reg, u32 val) | |
1da177e4 LT |
117 | { |
118 | if (sc_reg > SCR_CONTROL) | |
da3dbb17 | 119 | return -EINVAL; |
82ef04fb | 120 | writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); |
da3dbb17 | 121 | return 0; |
1da177e4 LT |
122 | } |
123 | ||
b03e66a6 DM |
124 | static int k2_sata_softreset(struct ata_link *link, |
125 | unsigned int *class, unsigned long deadline) | |
126 | { | |
127 | u8 dmactl; | |
128 | void __iomem *mmio = link->ap->ioaddr.bmdma_addr; | |
129 | ||
130 | dmactl = readb(mmio + ATA_DMA_CMD); | |
131 | ||
132 | /* Clear the start bit */ | |
133 | if (dmactl & ATA_DMA_START) { | |
134 | dmactl &= ~ATA_DMA_START; | |
135 | writeb(dmactl, mmio + ATA_DMA_CMD); | |
136 | } | |
137 | ||
138 | return ata_sff_softreset(link, class, deadline); | |
139 | } | |
140 | ||
141 | static int k2_sata_hardreset(struct ata_link *link, | |
142 | unsigned int *class, unsigned long deadline) | |
143 | { | |
144 | u8 dmactl; | |
145 | void __iomem *mmio = link->ap->ioaddr.bmdma_addr; | |
146 | ||
147 | dmactl = readb(mmio + ATA_DMA_CMD); | |
148 | ||
149 | /* Clear the start bit */ | |
150 | if (dmactl & ATA_DMA_START) { | |
151 | dmactl &= ~ATA_DMA_START; | |
152 | writeb(dmactl, mmio + ATA_DMA_CMD); | |
153 | } | |
154 | ||
155 | return sata_sff_hardreset(link, class, deadline); | |
156 | } | |
1da177e4 | 157 | |
057ace5e | 158 | static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) |
1da177e4 LT |
159 | { |
160 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
161 | unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; | |
162 | ||
163 | if (tf->ctl != ap->last_ctl) { | |
0d5ff566 | 164 | writeb(tf->ctl, ioaddr->ctl_addr); |
1da177e4 LT |
165 | ap->last_ctl = tf->ctl; |
166 | ata_wait_idle(ap); | |
167 | } | |
168 | if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { | |
850a9d8a | 169 | writew(tf->feature | (((u16)tf->hob_feature) << 8), |
0d5ff566 | 170 | ioaddr->feature_addr); |
850a9d8a | 171 | writew(tf->nsect | (((u16)tf->hob_nsect) << 8), |
0d5ff566 | 172 | ioaddr->nsect_addr); |
850a9d8a | 173 | writew(tf->lbal | (((u16)tf->hob_lbal) << 8), |
0d5ff566 | 174 | ioaddr->lbal_addr); |
850a9d8a | 175 | writew(tf->lbam | (((u16)tf->hob_lbam) << 8), |
0d5ff566 | 176 | ioaddr->lbam_addr); |
850a9d8a | 177 | writew(tf->lbah | (((u16)tf->hob_lbah) << 8), |
0d5ff566 | 178 | ioaddr->lbah_addr); |
1da177e4 | 179 | } else if (is_addr) { |
0d5ff566 TH |
180 | writew(tf->feature, ioaddr->feature_addr); |
181 | writew(tf->nsect, ioaddr->nsect_addr); | |
182 | writew(tf->lbal, ioaddr->lbal_addr); | |
183 | writew(tf->lbam, ioaddr->lbam_addr); | |
184 | writew(tf->lbah, ioaddr->lbah_addr); | |
1da177e4 LT |
185 | } |
186 | ||
187 | if (tf->flags & ATA_TFLAG_DEVICE) | |
0d5ff566 | 188 | writeb(tf->device, ioaddr->device_addr); |
1da177e4 LT |
189 | |
190 | ata_wait_idle(ap); | |
191 | } | |
192 | ||
193 | ||
194 | static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) | |
195 | { | |
196 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
ac19bff2 | 197 | u16 nsect, lbal, lbam, lbah, feature; |
1da177e4 | 198 | |
ac19bff2 | 199 | tf->command = k2_stat_check_status(ap); |
0d5ff566 TH |
200 | tf->device = readw(ioaddr->device_addr); |
201 | feature = readw(ioaddr->error_addr); | |
202 | nsect = readw(ioaddr->nsect_addr); | |
203 | lbal = readw(ioaddr->lbal_addr); | |
204 | lbam = readw(ioaddr->lbam_addr); | |
205 | lbah = readw(ioaddr->lbah_addr); | |
ac19bff2 JG |
206 | |
207 | tf->feature = feature; | |
208 | tf->nsect = nsect; | |
209 | tf->lbal = lbal; | |
210 | tf->lbam = lbam; | |
211 | tf->lbah = lbah; | |
1da177e4 LT |
212 | |
213 | if (tf->flags & ATA_TFLAG_LBA48) { | |
ac19bff2 | 214 | tf->hob_feature = feature >> 8; |
1da177e4 LT |
215 | tf->hob_nsect = nsect >> 8; |
216 | tf->hob_lbal = lbal >> 8; | |
217 | tf->hob_lbam = lbam >> 8; | |
218 | tf->hob_lbah = lbah >> 8; | |
5796d1c4 | 219 | } |
1da177e4 LT |
220 | } |
221 | ||
222 | /** | |
223 | * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) | |
224 | * @qc: Info associated with this ATA transaction. | |
225 | * | |
226 | * LOCKING: | |
cca3974e | 227 | * spin_lock_irqsave(host lock) |
1da177e4 LT |
228 | */ |
229 | ||
5796d1c4 | 230 | static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) |
1da177e4 LT |
231 | { |
232 | struct ata_port *ap = qc->ap; | |
233 | unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); | |
234 | u8 dmactl; | |
59f99880 JG |
235 | void __iomem *mmio = ap->ioaddr.bmdma_addr; |
236 | ||
1da177e4 LT |
237 | /* load PRD table addr. */ |
238 | mb(); /* make sure PRD table writes are visible to controller */ | |
f60d7011 | 239 | writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS); |
1da177e4 LT |
240 | |
241 | /* specify data direction, triple-check start bit is clear */ | |
242 | dmactl = readb(mmio + ATA_DMA_CMD); | |
243 | dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); | |
244 | if (!rw) | |
245 | dmactl |= ATA_DMA_WR; | |
246 | writeb(dmactl, mmio + ATA_DMA_CMD); | |
247 | ||
248 | /* issue r/w command if this is not a ATA DMA command*/ | |
249 | if (qc->tf.protocol != ATA_PROT_DMA) | |
5682ed33 | 250 | ap->ops->sff_exec_command(ap, &qc->tf); |
1da177e4 LT |
251 | } |
252 | ||
253 | /** | |
254 | * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) | |
255 | * @qc: Info associated with this ATA transaction. | |
256 | * | |
257 | * LOCKING: | |
cca3974e | 258 | * spin_lock_irqsave(host lock) |
1da177e4 LT |
259 | */ |
260 | ||
5796d1c4 | 261 | static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) |
1da177e4 LT |
262 | { |
263 | struct ata_port *ap = qc->ap; | |
59f99880 | 264 | void __iomem *mmio = ap->ioaddr.bmdma_addr; |
1da177e4 LT |
265 | u8 dmactl; |
266 | ||
267 | /* start host DMA transaction */ | |
268 | dmactl = readb(mmio + ATA_DMA_CMD); | |
269 | writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); | |
ec6add99 PM |
270 | /* This works around possible data corruption. |
271 | ||
272 | On certain SATA controllers that can be seen when the r/w | |
273 | command is given to the controller before the host DMA is | |
274 | started. | |
275 | ||
276 | On a Read command, the controller would initiate the | |
277 | command to the drive even before it sees the DMA | |
278 | start. When there are very fast drives connected to the | |
279 | controller, or when the data request hits in the drive | |
280 | cache, there is the possibility that the drive returns a | |
281 | part or all of the requested data to the controller before | |
282 | the DMA start is issued. In this case, the controller | |
283 | would become confused as to what to do with the data. In | |
284 | the worst case when all the data is returned back to the | |
285 | controller, the controller could hang. In other cases it | |
286 | could return partial data returning in data | |
287 | corruption. This problem has been seen in PPC systems and | |
288 | can also appear on an system with very fast disks, where | |
289 | the SATA controller is sitting behind a number of bridges, | |
290 | and hence there is significant latency between the r/w | |
291 | command and the start command. */ | |
292 | /* issue r/w command if the access is to ATA */ | |
1da177e4 | 293 | if (qc->tf.protocol == ATA_PROT_DMA) |
5682ed33 | 294 | ap->ops->sff_exec_command(ap, &qc->tf); |
1da177e4 LT |
295 | } |
296 | ||
8a60a071 | 297 | |
1da177e4 LT |
298 | static u8 k2_stat_check_status(struct ata_port *ap) |
299 | { | |
5796d1c4 | 300 | return readl(ap->ioaddr.status_addr); |
1da177e4 LT |
301 | } |
302 | ||
3f025677 | 303 | static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost) |
1da177e4 LT |
304 | { |
305 | struct ata_port *ap; | |
306 | struct device_node *np; | |
3f025677 | 307 | int index; |
1da177e4 LT |
308 | |
309 | /* Find the ata_port */ | |
35bb94b1 | 310 | ap = ata_shost_to_port(shost); |
1da177e4 LT |
311 | if (ap == NULL) |
312 | return 0; | |
313 | ||
314 | /* Find the OF node for the PCI device proper */ | |
cca3974e | 315 | np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); |
1da177e4 LT |
316 | if (np == NULL) |
317 | return 0; | |
318 | ||
319 | /* Match it to a port node */ | |
cca3974e | 320 | index = (ap == ap->host->ports[0]) ? 0 : 1; |
1da177e4 | 321 | for (np = np->child; np != NULL; np = np->sibling) { |
40cd3a45 | 322 | const u32 *reg = of_get_property(np, "reg", NULL); |
1da177e4 LT |
323 | if (!reg) |
324 | continue; | |
3f025677 | 325 | if (index == *reg) { |
cf8984bf | 326 | seq_printf(m, "devspec: %pOF\n", np); |
1da177e4 | 327 | break; |
3f025677 | 328 | } |
1da177e4 | 329 | } |
3f025677 | 330 | return 0; |
1da177e4 | 331 | } |
1da177e4 | 332 | |
193515d5 | 333 | static struct scsi_host_template k2_sata_sht = { |
68d1d07b | 334 | ATA_BMDMA_SHT(DRV_NAME), |
3f025677 | 335 | .show_info = k2_sata_show_info, |
1da177e4 LT |
336 | }; |
337 | ||
338 | ||
029cfd6b TH |
339 | static struct ata_port_operations k2_sata_ops = { |
340 | .inherits = &ata_bmdma_port_ops, | |
b03e66a6 DM |
341 | .softreset = k2_sata_softreset, |
342 | .hardreset = k2_sata_hardreset, | |
5682ed33 TH |
343 | .sff_tf_load = k2_sata_tf_load, |
344 | .sff_tf_read = k2_sata_tf_read, | |
345 | .sff_check_status = k2_stat_check_status, | |
c10340ac | 346 | .check_atapi_dma = k2_sata_check_atapi_dma, |
1da177e4 LT |
347 | .bmdma_setup = k2_bmdma_setup_mmio, |
348 | .bmdma_start = k2_bmdma_start_mmio, | |
1da177e4 LT |
349 | .scr_read = k2_sata_scr_read, |
350 | .scr_write = k2_sata_scr_write, | |
1da177e4 LT |
351 | }; |
352 | ||
4447d351 | 353 | static const struct ata_port_info k2_port_info[] = { |
931506d3 | 354 | /* chip_svw4 */ |
4447d351 | 355 | { |
9cbe056f | 356 | .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA, |
14bdef98 EIB |
357 | .pio_mask = ATA_PIO4, |
358 | .mwdma_mask = ATA_MWDMA2, | |
bf6263a8 | 359 | .udma_mask = ATA_UDMA6, |
4447d351 TH |
360 | .port_ops = &k2_sata_ops, |
361 | }, | |
931506d3 | 362 | /* chip_svw8 */ |
4447d351 | 363 | { |
9cbe056f SS |
364 | .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA | |
365 | K2_FLAG_SATA_8_PORTS, | |
14bdef98 EIB |
366 | .pio_mask = ATA_PIO4, |
367 | .mwdma_mask = ATA_MWDMA2, | |
bf6263a8 | 368 | .udma_mask = ATA_UDMA6, |
4447d351 TH |
369 | .port_ops = &k2_sata_ops, |
370 | }, | |
931506d3 AS |
371 | /* chip_svw42 */ |
372 | { | |
9cbe056f | 373 | .flags = ATA_FLAG_SATA | K2_FLAG_BAR_POS_3, |
14bdef98 EIB |
374 | .pio_mask = ATA_PIO4, |
375 | .mwdma_mask = ATA_MWDMA2, | |
931506d3 AS |
376 | .udma_mask = ATA_UDMA6, |
377 | .port_ops = &k2_sata_ops, | |
378 | }, | |
379 | /* chip_svw43 */ | |
380 | { | |
9cbe056f | 381 | .flags = ATA_FLAG_SATA, |
14bdef98 EIB |
382 | .pio_mask = ATA_PIO4, |
383 | .mwdma_mask = ATA_MWDMA2, | |
931506d3 AS |
384 | .udma_mask = ATA_UDMA6, |
385 | .port_ops = &k2_sata_ops, | |
386 | }, | |
4447d351 TH |
387 | }; |
388 | ||
0d5ff566 | 389 | static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) |
1da177e4 LT |
390 | { |
391 | port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; | |
392 | port->data_addr = base + K2_SATA_TF_DATA_OFFSET; | |
393 | port->feature_addr = | |
394 | port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; | |
395 | port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; | |
396 | port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; | |
397 | port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; | |
398 | port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; | |
399 | port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; | |
400 | port->command_addr = | |
401 | port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; | |
402 | port->altstatus_addr = | |
403 | port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; | |
404 | port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; | |
405 | port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; | |
406 | } | |
407 | ||
408 | ||
5796d1c4 | 409 | static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
1da177e4 | 410 | { |
4447d351 TH |
411 | const struct ata_port_info *ppi[] = |
412 | { &k2_port_info[ent->driver_data], NULL }; | |
413 | struct ata_host *host; | |
ea6ba10b | 414 | void __iomem *mmio_base; |
931506d3 | 415 | int n_ports, i, rc, bar_pos; |
1da177e4 | 416 | |
06296a1e | 417 | ata_print_version_once(&pdev->dev, DRV_VERSION); |
1da177e4 | 418 | |
4447d351 TH |
419 | /* allocate host */ |
420 | n_ports = 4; | |
421 | if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS) | |
422 | n_ports = 8; | |
423 | ||
424 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); | |
425 | if (!host) | |
426 | return -ENOMEM; | |
427 | ||
931506d3 AS |
428 | bar_pos = 5; |
429 | if (ppi[0]->flags & K2_FLAG_BAR_POS_3) | |
430 | bar_pos = 3; | |
1da177e4 LT |
431 | /* |
432 | * If this driver happens to only be useful on Apple's K2, then | |
433 | * we should check that here as it has a normal Serverworks ID | |
434 | */ | |
24dc5f33 | 435 | rc = pcim_enable_device(pdev); |
1da177e4 LT |
436 | if (rc) |
437 | return rc; | |
4447d351 | 438 | |
1da177e4 LT |
439 | /* |
440 | * Check if we have resources mapped at all (second function may | |
441 | * have been disabled by firmware) | |
442 | */ | |
931506d3 AS |
443 | if (pci_resource_len(pdev, bar_pos) == 0) { |
444 | /* In IDE mode we need to pin the device to ensure that | |
445 | pcim_release does not clear the busmaster bit in config | |
446 | space, clearing causes busmaster DMA to fail on | |
447 | ports 3 & 4 */ | |
448 | pcim_pin_device(pdev); | |
1da177e4 | 449 | return -ENODEV; |
931506d3 | 450 | } |
1da177e4 | 451 | |
0d5ff566 | 452 | /* Request and iomap PCI regions */ |
931506d3 | 453 | rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); |
0d5ff566 | 454 | if (rc == -EBUSY) |
24dc5f33 | 455 | pcim_pin_device(pdev); |
0d5ff566 | 456 | if (rc) |
24dc5f33 | 457 | return rc; |
4447d351 | 458 | host->iomap = pcim_iomap_table(pdev); |
931506d3 | 459 | mmio_base = host->iomap[bar_pos]; |
4447d351 TH |
460 | |
461 | /* different controllers have different number of ports - currently 4 or 8 */ | |
462 | /* All ports are on the same function. Multi-function device is no | |
463 | * longer available. This should not be seen in any system. */ | |
cbcdd875 TH |
464 | for (i = 0; i < host->n_ports; i++) { |
465 | struct ata_port *ap = host->ports[i]; | |
466 | unsigned int offset = i * K2_SATA_PORT_OFFSET; | |
467 | ||
468 | k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); | |
469 | ||
470 | ata_port_pbar_desc(ap, 5, -1, "mmio"); | |
471 | ata_port_pbar_desc(ap, 5, offset, "port"); | |
472 | } | |
1da177e4 | 473 | |
b5e55556 | 474 | rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); |
1da177e4 | 475 | if (rc) |
24dc5f33 | 476 | return rc; |
1da177e4 | 477 | |
0d5ff566 TH |
478 | /* Clear a magic bit in SCR1 according to Darwin, those help |
479 | * some funky seagate drives (though so far, those were already | |
480 | * set by the firmware on the machines I had access to) | |
481 | */ | |
482 | writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, | |
483 | mmio_base + K2_SATA_SICR1_OFFSET); | |
484 | ||
485 | /* Clear SATA error & interrupts we don't use */ | |
486 | writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); | |
487 | writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); | |
1da177e4 LT |
488 | |
489 | pci_set_master(pdev); | |
c3b28894 | 490 | return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, |
9363c382 | 491 | IRQF_SHARED, &k2_sata_sht); |
1da177e4 LT |
492 | } |
493 | ||
60bf09a3 NS |
494 | /* 0x240 is device ID for Apple K2 device |
495 | * 0x241 is device ID for Serverworks Frodo4 | |
496 | * 0x242 is device ID for Serverworks Frodo8 | |
497 | * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA | |
498 | * controller | |
499 | * */ | |
3b7d697d | 500 | static const struct pci_device_id k2_sata_pci_tbl[] = { |
931506d3 | 501 | { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, |
aeb74914 JG |
502 | { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, |
503 | { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, | |
931506d3 AS |
504 | { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, |
505 | { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, | |
506 | { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, | |
507 | { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, | |
2d2744fc | 508 | |
1da177e4 LT |
509 | { } |
510 | }; | |
511 | ||
1da177e4 LT |
512 | static struct pci_driver k2_sata_pci_driver = { |
513 | .name = DRV_NAME, | |
514 | .id_table = k2_sata_pci_tbl, | |
515 | .probe = k2_sata_init_one, | |
516 | .remove = ata_pci_remove_one, | |
517 | }; | |
518 | ||
2fc75da0 | 519 | module_pci_driver(k2_sata_pci_driver); |
1da177e4 | 520 | |
1da177e4 LT |
521 | MODULE_AUTHOR("Benjamin Herrenschmidt"); |
522 | MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); | |
523 | MODULE_LICENSE("GPL"); | |
524 | MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); | |
525 | MODULE_VERSION(DRV_VERSION); |