Commit | Line | Data |
---|---|---|
1fd7a697 TH |
1 | /* |
2 | * sata_inic162x.c - Driver for Initio 162x SATA controllers | |
3 | * | |
4 | * Copyright 2006 SUSE Linux Products GmbH | |
5 | * Copyright 2006 Tejun Heo <teheo@novell.com> | |
6 | * | |
7 | * This file is released under GPL v2. | |
8 | * | |
9 | * This controller is eccentric and easily locks up if something isn't | |
10 | * right. Documentation is available at initio's website but it only | |
11 | * documents registers (not programming model). | |
12 | * | |
13 | * - ATA disks work. | |
14 | * - Hotplug works. | |
15 | * - ATAPI read works but burning doesn't. This thing is really | |
16 | * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and | |
17 | * ATAPI DMA WRITE should be programmed. If you've got a clue, be | |
18 | * my guest. | |
19 | * - Both STR and STD work. | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
23 | #include <linux/module.h> | |
24 | #include <linux/pci.h> | |
25 | #include <scsi/scsi_host.h> | |
26 | #include <linux/libata.h> | |
27 | #include <linux/blkdev.h> | |
28 | #include <scsi/scsi_device.h> | |
29 | ||
30 | #define DRV_NAME "sata_inic162x" | |
2a3103ce | 31 | #define DRV_VERSION "0.3" |
1fd7a697 TH |
32 | |
33 | enum { | |
34 | MMIO_BAR = 5, | |
35 | ||
36 | NR_PORTS = 2, | |
37 | ||
38 | HOST_CTL = 0x7c, | |
39 | HOST_STAT = 0x7e, | |
40 | HOST_IRQ_STAT = 0xbc, | |
41 | HOST_IRQ_MASK = 0xbe, | |
42 | ||
43 | PORT_SIZE = 0x40, | |
44 | ||
45 | /* registers for ATA TF operation */ | |
46 | PORT_TF = 0x00, | |
47 | PORT_ALT_STAT = 0x08, | |
48 | PORT_IRQ_STAT = 0x09, | |
49 | PORT_IRQ_MASK = 0x0a, | |
50 | PORT_PRD_CTL = 0x0b, | |
51 | PORT_PRD_ADDR = 0x0c, | |
52 | PORT_PRD_XFERLEN = 0x10, | |
53 | ||
54 | /* IDMA register */ | |
55 | PORT_IDMA_CTL = 0x14, | |
56 | ||
57 | PORT_SCR = 0x20, | |
58 | ||
59 | /* HOST_CTL bits */ | |
60 | HCTL_IRQOFF = (1 << 8), /* global IRQ off */ | |
61 | HCTL_PWRDWN = (1 << 13), /* power down PHYs */ | |
62 | HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ | |
63 | HCTL_RPGSEL = (1 << 15), /* register page select */ | |
64 | ||
65 | HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | | |
66 | HCTL_RPGSEL, | |
67 | ||
68 | /* HOST_IRQ_(STAT|MASK) bits */ | |
69 | HIRQ_PORT0 = (1 << 0), | |
70 | HIRQ_PORT1 = (1 << 1), | |
71 | HIRQ_SOFT = (1 << 14), | |
72 | HIRQ_GLOBAL = (1 << 15), /* STAT only */ | |
73 | ||
74 | /* PORT_IRQ_(STAT|MASK) bits */ | |
75 | PIRQ_OFFLINE = (1 << 0), /* device unplugged */ | |
76 | PIRQ_ONLINE = (1 << 1), /* device plugged */ | |
77 | PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ | |
78 | PIRQ_FATAL = (1 << 3), /* fatal error */ | |
79 | PIRQ_ATA = (1 << 4), /* ATA interrupt */ | |
80 | PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ | |
81 | PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ | |
82 | ||
83 | PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, | |
84 | ||
85 | PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA, | |
86 | PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE, | |
87 | PIRQ_MASK_FREEZE = 0xff, | |
88 | ||
89 | /* PORT_PRD_CTL bits */ | |
90 | PRD_CTL_START = (1 << 0), | |
91 | PRD_CTL_WR = (1 << 3), | |
92 | PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ | |
93 | ||
94 | /* PORT_IDMA_CTL bits */ | |
95 | IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ | |
96 | IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ | |
97 | IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ | |
98 | IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ | |
99 | }; | |
100 | ||
101 | struct inic_host_priv { | |
102 | u16 cached_hctl; | |
103 | }; | |
104 | ||
105 | struct inic_port_priv { | |
106 | u8 dfl_prdctl; | |
107 | u8 cached_prdctl; | |
108 | u8 cached_pirq_mask; | |
109 | }; | |
110 | ||
1fd7a697 | 111 | static struct scsi_host_template inic_sht = { |
68d1d07b | 112 | ATA_BMDMA_SHT(DRV_NAME), |
1fd7a697 TH |
113 | }; |
114 | ||
115 | static const int scr_map[] = { | |
116 | [SCR_STATUS] = 0, | |
117 | [SCR_ERROR] = 1, | |
118 | [SCR_CONTROL] = 2, | |
119 | }; | |
120 | ||
5796d1c4 | 121 | static void __iomem *inic_port_base(struct ata_port *ap) |
1fd7a697 | 122 | { |
0d5ff566 | 123 | return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE; |
1fd7a697 TH |
124 | } |
125 | ||
126 | static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask) | |
127 | { | |
128 | void __iomem *port_base = inic_port_base(ap); | |
129 | struct inic_port_priv *pp = ap->private_data; | |
130 | ||
131 | writeb(mask, port_base + PORT_IRQ_MASK); | |
132 | pp->cached_pirq_mask = mask; | |
133 | } | |
134 | ||
135 | static void inic_set_pirq_mask(struct ata_port *ap, u8 mask) | |
136 | { | |
137 | struct inic_port_priv *pp = ap->private_data; | |
138 | ||
139 | if (pp->cached_pirq_mask != mask) | |
140 | __inic_set_pirq_mask(ap, mask); | |
141 | } | |
142 | ||
143 | static void inic_reset_port(void __iomem *port_base) | |
144 | { | |
145 | void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; | |
146 | u16 ctl; | |
147 | ||
148 | ctl = readw(idma_ctl); | |
149 | ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO); | |
150 | ||
151 | /* mask IRQ and assert reset */ | |
152 | writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl); | |
153 | readw(idma_ctl); /* flush */ | |
154 | ||
155 | /* give it some time */ | |
156 | msleep(1); | |
157 | ||
158 | /* release reset */ | |
159 | writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl); | |
160 | ||
161 | /* clear irq */ | |
162 | writeb(0xff, port_base + PORT_IRQ_STAT); | |
163 | ||
164 | /* reenable ATA IRQ, turn off IDMA mode */ | |
165 | writew(ctl, idma_ctl); | |
166 | } | |
167 | ||
da3dbb17 | 168 | static int inic_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val) |
1fd7a697 | 169 | { |
59f99880 | 170 | void __iomem *scr_addr = ap->ioaddr.scr_addr; |
1fd7a697 | 171 | void __iomem *addr; |
1fd7a697 TH |
172 | |
173 | if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) | |
da3dbb17 | 174 | return -EINVAL; |
1fd7a697 TH |
175 | |
176 | addr = scr_addr + scr_map[sc_reg] * 4; | |
da3dbb17 | 177 | *val = readl(scr_addr + scr_map[sc_reg] * 4); |
1fd7a697 TH |
178 | |
179 | /* this controller has stuck DIAG.N, ignore it */ | |
180 | if (sc_reg == SCR_ERROR) | |
da3dbb17 TH |
181 | *val &= ~SERR_PHYRDY_CHG; |
182 | return 0; | |
1fd7a697 TH |
183 | } |
184 | ||
da3dbb17 | 185 | static int inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) |
1fd7a697 | 186 | { |
59f99880 | 187 | void __iomem *scr_addr = ap->ioaddr.scr_addr; |
1fd7a697 TH |
188 | void __iomem *addr; |
189 | ||
190 | if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) | |
da3dbb17 | 191 | return -EINVAL; |
1fd7a697 TH |
192 | |
193 | addr = scr_addr + scr_map[sc_reg] * 4; | |
194 | writel(val, scr_addr + scr_map[sc_reg] * 4); | |
da3dbb17 | 195 | return 0; |
1fd7a697 TH |
196 | } |
197 | ||
198 | /* | |
199 | * In TF mode, inic162x is very similar to SFF device. TF registers | |
200 | * function the same. DMA engine behaves similary using the same PRD | |
201 | * format as BMDMA but different command register, interrupt and event | |
202 | * notification methods are used. The following inic_bmdma_*() | |
203 | * functions do the impedance matching. | |
204 | */ | |
205 | static void inic_bmdma_setup(struct ata_queued_cmd *qc) | |
206 | { | |
207 | struct ata_port *ap = qc->ap; | |
208 | struct inic_port_priv *pp = ap->private_data; | |
209 | void __iomem *port_base = inic_port_base(ap); | |
210 | int rw = qc->tf.flags & ATA_TFLAG_WRITE; | |
211 | ||
212 | /* make sure device sees PRD table writes */ | |
213 | wmb(); | |
214 | ||
215 | /* load transfer length */ | |
216 | writel(qc->nbytes, port_base + PORT_PRD_XFERLEN); | |
217 | ||
218 | /* turn on DMA and specify data direction */ | |
219 | pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN; | |
220 | if (!rw) | |
221 | pp->cached_prdctl |= PRD_CTL_WR; | |
222 | writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); | |
223 | ||
224 | /* issue r/w command */ | |
5682ed33 | 225 | ap->ops->sff_exec_command(ap, &qc->tf); |
1fd7a697 TH |
226 | } |
227 | ||
228 | static void inic_bmdma_start(struct ata_queued_cmd *qc) | |
229 | { | |
230 | struct ata_port *ap = qc->ap; | |
231 | struct inic_port_priv *pp = ap->private_data; | |
232 | void __iomem *port_base = inic_port_base(ap); | |
233 | ||
234 | /* start host DMA transaction */ | |
235 | pp->cached_prdctl |= PRD_CTL_START; | |
236 | writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); | |
237 | } | |
238 | ||
239 | static void inic_bmdma_stop(struct ata_queued_cmd *qc) | |
240 | { | |
241 | struct ata_port *ap = qc->ap; | |
242 | struct inic_port_priv *pp = ap->private_data; | |
243 | void __iomem *port_base = inic_port_base(ap); | |
244 | ||
245 | /* stop DMA engine */ | |
246 | writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); | |
247 | } | |
248 | ||
249 | static u8 inic_bmdma_status(struct ata_port *ap) | |
250 | { | |
251 | /* event is already verified by the interrupt handler */ | |
252 | return ATA_DMA_INTR; | |
253 | } | |
254 | ||
1fd7a697 TH |
255 | static void inic_host_intr(struct ata_port *ap) |
256 | { | |
257 | void __iomem *port_base = inic_port_base(ap); | |
9af5c9c9 | 258 | struct ata_eh_info *ehi = &ap->link.eh_info; |
1fd7a697 TH |
259 | u8 irq_stat; |
260 | ||
261 | /* fetch and clear irq */ | |
262 | irq_stat = readb(port_base + PORT_IRQ_STAT); | |
263 | writeb(irq_stat, port_base + PORT_IRQ_STAT); | |
264 | ||
265 | if (likely(!(irq_stat & PIRQ_ERR))) { | |
9af5c9c9 TH |
266 | struct ata_queued_cmd *qc = |
267 | ata_qc_from_tag(ap, ap->link.active_tag); | |
1fd7a697 TH |
268 | |
269 | if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { | |
5682ed33 | 270 | ap->ops->sff_check_status(ap); /* clear ATA interrupt */ |
1fd7a697 TH |
271 | return; |
272 | } | |
273 | ||
9363c382 | 274 | if (likely(ata_sff_host_intr(ap, qc))) |
1fd7a697 TH |
275 | return; |
276 | ||
5682ed33 | 277 | ap->ops->sff_check_status(ap); /* clear ATA interrupt */ |
1fd7a697 TH |
278 | ata_port_printk(ap, KERN_WARNING, "unhandled " |
279 | "interrupt, irq_stat=%x\n", irq_stat); | |
280 | return; | |
281 | } | |
282 | ||
283 | /* error */ | |
284 | ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat); | |
285 | ||
286 | if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { | |
287 | ata_ehi_hotplugged(ehi); | |
288 | ata_port_freeze(ap); | |
289 | } else | |
290 | ata_port_abort(ap); | |
291 | } | |
292 | ||
293 | static irqreturn_t inic_interrupt(int irq, void *dev_instance) | |
294 | { | |
295 | struct ata_host *host = dev_instance; | |
0d5ff566 | 296 | void __iomem *mmio_base = host->iomap[MMIO_BAR]; |
1fd7a697 TH |
297 | u16 host_irq_stat; |
298 | int i, handled = 0;; | |
299 | ||
300 | host_irq_stat = readw(mmio_base + HOST_IRQ_STAT); | |
301 | ||
302 | if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) | |
303 | goto out; | |
304 | ||
305 | spin_lock(&host->lock); | |
306 | ||
307 | for (i = 0; i < NR_PORTS; i++) { | |
308 | struct ata_port *ap = host->ports[i]; | |
309 | ||
310 | if (!(host_irq_stat & (HIRQ_PORT0 << i))) | |
311 | continue; | |
312 | ||
313 | if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) { | |
314 | inic_host_intr(ap); | |
315 | handled++; | |
316 | } else { | |
317 | if (ata_ratelimit()) | |
318 | dev_printk(KERN_ERR, host->dev, "interrupt " | |
319 | "from disabled port %d (0x%x)\n", | |
320 | i, host_irq_stat); | |
321 | } | |
322 | } | |
323 | ||
324 | spin_unlock(&host->lock); | |
325 | ||
326 | out: | |
327 | return IRQ_RETVAL(handled); | |
328 | } | |
329 | ||
330 | static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) | |
331 | { | |
332 | struct ata_port *ap = qc->ap; | |
333 | ||
334 | /* ATA IRQ doesn't wait for DMA transfer completion and vice | |
335 | * versa. Mask IRQ selectively to detect command completion. | |
336 | * Without it, ATA DMA read command can cause data corruption. | |
337 | * | |
338 | * Something similar might be needed for ATAPI writes. I | |
339 | * tried a lot of combinations but couldn't find the solution. | |
340 | */ | |
341 | if (qc->tf.protocol == ATA_PROT_DMA && | |
342 | !(qc->tf.flags & ATA_TFLAG_WRITE)) | |
343 | inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ); | |
344 | else | |
345 | inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); | |
346 | ||
347 | /* Issuing a command to yet uninitialized port locks up the | |
348 | * controller. Most of the time, this happens for the first | |
349 | * command after reset which are ATA and ATAPI IDENTIFYs. | |
350 | * Fast fail if stat is 0x7f or 0xff for those commands. | |
351 | */ | |
352 | if (unlikely(qc->tf.command == ATA_CMD_ID_ATA || | |
353 | qc->tf.command == ATA_CMD_ID_ATAPI)) { | |
5682ed33 | 354 | u8 stat = ap->ops->sff_check_status(ap); |
1fd7a697 TH |
355 | if (stat == 0x7f || stat == 0xff) |
356 | return AC_ERR_HSM; | |
357 | } | |
358 | ||
9363c382 | 359 | return ata_sff_qc_issue(qc); |
1fd7a697 TH |
360 | } |
361 | ||
362 | static void inic_freeze(struct ata_port *ap) | |
363 | { | |
364 | void __iomem *port_base = inic_port_base(ap); | |
365 | ||
366 | __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE); | |
367 | ||
5682ed33 | 368 | ap->ops->sff_check_status(ap); |
1fd7a697 TH |
369 | writeb(0xff, port_base + PORT_IRQ_STAT); |
370 | ||
371 | readb(port_base + PORT_IRQ_STAT); /* flush */ | |
372 | } | |
373 | ||
374 | static void inic_thaw(struct ata_port *ap) | |
375 | { | |
376 | void __iomem *port_base = inic_port_base(ap); | |
377 | ||
5682ed33 | 378 | ap->ops->sff_check_status(ap); |
1fd7a697 TH |
379 | writeb(0xff, port_base + PORT_IRQ_STAT); |
380 | ||
381 | __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); | |
382 | ||
383 | readb(port_base + PORT_IRQ_STAT); /* flush */ | |
384 | } | |
385 | ||
386 | /* | |
387 | * SRST and SControl hardreset don't give valid signature on this | |
388 | * controller. Only controller specific hardreset mechanism works. | |
389 | */ | |
cc0680a5 | 390 | static int inic_hardreset(struct ata_link *link, unsigned int *class, |
d4b2bab4 | 391 | unsigned long deadline) |
1fd7a697 | 392 | { |
cc0680a5 | 393 | struct ata_port *ap = link->ap; |
1fd7a697 TH |
394 | void __iomem *port_base = inic_port_base(ap); |
395 | void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; | |
cc0680a5 | 396 | const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); |
1fd7a697 TH |
397 | u16 val; |
398 | int rc; | |
399 | ||
400 | /* hammer it into sane state */ | |
401 | inic_reset_port(port_base); | |
402 | ||
1fd7a697 TH |
403 | val = readw(idma_ctl); |
404 | writew(val | IDMA_CTL_RST_ATA, idma_ctl); | |
405 | readw(idma_ctl); /* flush */ | |
406 | msleep(1); | |
407 | writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); | |
408 | ||
cc0680a5 | 409 | rc = sata_link_resume(link, timing, deadline); |
1fd7a697 | 410 | if (rc) { |
cc0680a5 | 411 | ata_link_printk(link, KERN_WARNING, "failed to resume " |
fe334602 | 412 | "link after reset (errno=%d)\n", rc); |
1fd7a697 TH |
413 | return rc; |
414 | } | |
415 | ||
1fd7a697 | 416 | *class = ATA_DEV_NONE; |
cc0680a5 | 417 | if (ata_link_online(link)) { |
1fd7a697 TH |
418 | struct ata_taskfile tf; |
419 | ||
705e76be TH |
420 | /* wait for link to become ready */ |
421 | rc = ata_sff_wait_after_reset(link, 1, deadline); | |
9b89391c TH |
422 | /* link occupied, -ENODEV too is an error */ |
423 | if (rc) { | |
cc0680a5 | 424 | ata_link_printk(link, KERN_WARNING, "device not ready " |
d4b2bab4 TH |
425 | "after hardreset (errno=%d)\n", rc); |
426 | return rc; | |
1fd7a697 TH |
427 | } |
428 | ||
9363c382 | 429 | ata_sff_tf_read(ap, &tf); |
1fd7a697 | 430 | *class = ata_dev_classify(&tf); |
1fd7a697 TH |
431 | } |
432 | ||
433 | return 0; | |
434 | } | |
435 | ||
436 | static void inic_error_handler(struct ata_port *ap) | |
437 | { | |
438 | void __iomem *port_base = inic_port_base(ap); | |
439 | struct inic_port_priv *pp = ap->private_data; | |
440 | unsigned long flags; | |
441 | ||
442 | /* reset PIO HSM and stop DMA engine */ | |
443 | inic_reset_port(port_base); | |
444 | ||
445 | spin_lock_irqsave(ap->lock, flags); | |
446 | ap->hsm_task_state = HSM_ST_IDLE; | |
447 | writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); | |
448 | spin_unlock_irqrestore(ap->lock, flags); | |
449 | ||
450 | /* PIO and DMA engines have been stopped, perform recovery */ | |
a1efdaba | 451 | ata_std_error_handler(ap); |
1fd7a697 TH |
452 | } |
453 | ||
454 | static void inic_post_internal_cmd(struct ata_queued_cmd *qc) | |
455 | { | |
456 | /* make DMA engine forget about the failed command */ | |
a51d644a | 457 | if (qc->flags & ATA_QCFLAG_FAILED) |
1fd7a697 TH |
458 | inic_reset_port(inic_port_base(qc->ap)); |
459 | } | |
460 | ||
cd0d3bbc | 461 | static void inic_dev_config(struct ata_device *dev) |
1fd7a697 TH |
462 | { |
463 | /* inic can only handle upto LBA28 max sectors */ | |
464 | if (dev->max_sectors > ATA_MAX_SECTORS) | |
465 | dev->max_sectors = ATA_MAX_SECTORS; | |
90c93785 TH |
466 | |
467 | if (dev->n_sectors >= 1 << 28) { | |
468 | ata_dev_printk(dev, KERN_ERR, | |
469 | "ERROR: This driver doesn't support LBA48 yet and may cause\n" | |
470 | " data corruption on such devices. Disabling.\n"); | |
471 | ata_dev_disable(dev); | |
472 | } | |
1fd7a697 TH |
473 | } |
474 | ||
475 | static void init_port(struct ata_port *ap) | |
476 | { | |
477 | void __iomem *port_base = inic_port_base(ap); | |
478 | ||
479 | /* Setup PRD address */ | |
480 | writel(ap->prd_dma, port_base + PORT_PRD_ADDR); | |
481 | } | |
482 | ||
483 | static int inic_port_resume(struct ata_port *ap) | |
484 | { | |
485 | init_port(ap); | |
486 | return 0; | |
487 | } | |
488 | ||
489 | static int inic_port_start(struct ata_port *ap) | |
490 | { | |
491 | void __iomem *port_base = inic_port_base(ap); | |
492 | struct inic_port_priv *pp; | |
493 | u8 tmp; | |
494 | int rc; | |
495 | ||
496 | /* alloc and initialize private data */ | |
24dc5f33 | 497 | pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL); |
1fd7a697 TH |
498 | if (!pp) |
499 | return -ENOMEM; | |
500 | ap->private_data = pp; | |
501 | ||
502 | /* default PRD_CTL value, DMAEN, WR and START off */ | |
503 | tmp = readb(port_base + PORT_PRD_CTL); | |
504 | tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START); | |
505 | pp->dfl_prdctl = tmp; | |
506 | ||
507 | /* Alloc resources */ | |
508 | rc = ata_port_start(ap); | |
509 | if (rc) { | |
510 | kfree(pp); | |
511 | return rc; | |
512 | } | |
513 | ||
514 | init_port(ap); | |
515 | ||
516 | return 0; | |
517 | } | |
518 | ||
1fd7a697 | 519 | static struct ata_port_operations inic_port_ops = { |
029cfd6b | 520 | .inherits = &ata_sff_port_ops, |
1fd7a697 TH |
521 | |
522 | .bmdma_setup = inic_bmdma_setup, | |
523 | .bmdma_start = inic_bmdma_start, | |
524 | .bmdma_stop = inic_bmdma_stop, | |
525 | .bmdma_status = inic_bmdma_status, | |
1fd7a697 | 526 | .qc_issue = inic_qc_issue, |
1fd7a697 TH |
527 | |
528 | .freeze = inic_freeze, | |
529 | .thaw = inic_thaw, | |
a1efdaba TH |
530 | .softreset = ATA_OP_NULL, /* softreset is broken */ |
531 | .hardreset = inic_hardreset, | |
1fd7a697 TH |
532 | .error_handler = inic_error_handler, |
533 | .post_internal_cmd = inic_post_internal_cmd, | |
534 | .dev_config = inic_dev_config, | |
535 | ||
029cfd6b TH |
536 | .scr_read = inic_scr_read, |
537 | .scr_write = inic_scr_write, | |
1fd7a697 | 538 | |
029cfd6b | 539 | .port_resume = inic_port_resume, |
1fd7a697 | 540 | .port_start = inic_port_start, |
1fd7a697 TH |
541 | }; |
542 | ||
543 | static struct ata_port_info inic_port_info = { | |
0dc36888 | 544 | /* For some reason, ATAPI_PROT_PIO is broken on this |
1fd7a697 TH |
545 | * controller, and no, PIO_POLLING does't fix it. It somehow |
546 | * manages to report the wrong ireason and ignoring ireason | |
547 | * results in machine lock up. Tell libata to always prefer | |
548 | * DMA. | |
549 | */ | |
550 | .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, | |
551 | .pio_mask = 0x1f, /* pio0-4 */ | |
552 | .mwdma_mask = 0x07, /* mwdma0-2 */ | |
bf6263a8 | 553 | .udma_mask = ATA_UDMA6, |
1fd7a697 TH |
554 | .port_ops = &inic_port_ops |
555 | }; | |
556 | ||
557 | static int init_controller(void __iomem *mmio_base, u16 hctl) | |
558 | { | |
559 | int i; | |
560 | u16 val; | |
561 | ||
562 | hctl &= ~HCTL_KNOWN_BITS; | |
563 | ||
564 | /* Soft reset whole controller. Spec says reset duration is 3 | |
565 | * PCI clocks, be generous and give it 10ms. | |
566 | */ | |
567 | writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); | |
568 | readw(mmio_base + HOST_CTL); /* flush */ | |
569 | ||
570 | for (i = 0; i < 10; i++) { | |
571 | msleep(1); | |
572 | val = readw(mmio_base + HOST_CTL); | |
573 | if (!(val & HCTL_SOFTRST)) | |
574 | break; | |
575 | } | |
576 | ||
577 | if (val & HCTL_SOFTRST) | |
578 | return -EIO; | |
579 | ||
580 | /* mask all interrupts and reset ports */ | |
581 | for (i = 0; i < NR_PORTS; i++) { | |
582 | void __iomem *port_base = mmio_base + i * PORT_SIZE; | |
583 | ||
584 | writeb(0xff, port_base + PORT_IRQ_MASK); | |
585 | inic_reset_port(port_base); | |
586 | } | |
587 | ||
588 | /* port IRQ is masked now, unmask global IRQ */ | |
589 | writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); | |
590 | val = readw(mmio_base + HOST_IRQ_MASK); | |
591 | val &= ~(HIRQ_PORT0 | HIRQ_PORT1); | |
592 | writew(val, mmio_base + HOST_IRQ_MASK); | |
593 | ||
594 | return 0; | |
595 | } | |
596 | ||
438ac6d5 | 597 | #ifdef CONFIG_PM |
1fd7a697 TH |
598 | static int inic_pci_device_resume(struct pci_dev *pdev) |
599 | { | |
600 | struct ata_host *host = dev_get_drvdata(&pdev->dev); | |
601 | struct inic_host_priv *hpriv = host->private_data; | |
0d5ff566 | 602 | void __iomem *mmio_base = host->iomap[MMIO_BAR]; |
1fd7a697 TH |
603 | int rc; |
604 | ||
5aea408d DM |
605 | rc = ata_pci_device_do_resume(pdev); |
606 | if (rc) | |
607 | return rc; | |
1fd7a697 TH |
608 | |
609 | if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { | |
1fd7a697 TH |
610 | rc = init_controller(mmio_base, hpriv->cached_hctl); |
611 | if (rc) | |
612 | return rc; | |
613 | } | |
614 | ||
615 | ata_host_resume(host); | |
616 | ||
617 | return 0; | |
618 | } | |
438ac6d5 | 619 | #endif |
1fd7a697 TH |
620 | |
621 | static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) | |
622 | { | |
623 | static int printed_version; | |
4447d351 TH |
624 | const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; |
625 | struct ata_host *host; | |
1fd7a697 | 626 | struct inic_host_priv *hpriv; |
0d5ff566 | 627 | void __iomem * const *iomap; |
1fd7a697 TH |
628 | int i, rc; |
629 | ||
630 | if (!printed_version++) | |
631 | dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); | |
632 | ||
4447d351 TH |
633 | /* alloc host */ |
634 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); | |
635 | hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); | |
636 | if (!host || !hpriv) | |
637 | return -ENOMEM; | |
638 | ||
639 | host->private_data = hpriv; | |
640 | ||
641 | /* acquire resources and fill host */ | |
24dc5f33 | 642 | rc = pcim_enable_device(pdev); |
1fd7a697 TH |
643 | if (rc) |
644 | return rc; | |
645 | ||
0d5ff566 TH |
646 | rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); |
647 | if (rc) | |
648 | return rc; | |
4447d351 TH |
649 | host->iomap = iomap = pcim_iomap_table(pdev); |
650 | ||
651 | for (i = 0; i < NR_PORTS; i++) { | |
cbcdd875 TH |
652 | struct ata_port *ap = host->ports[i]; |
653 | struct ata_ioports *port = &ap->ioaddr; | |
654 | unsigned int offset = i * PORT_SIZE; | |
4447d351 TH |
655 | |
656 | port->cmd_addr = iomap[2 * i]; | |
657 | port->altstatus_addr = | |
658 | port->ctl_addr = (void __iomem *) | |
659 | ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); | |
cbcdd875 | 660 | port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR; |
4447d351 | 661 | |
9363c382 | 662 | ata_sff_std_ports(port); |
cbcdd875 TH |
663 | |
664 | ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio"); | |
665 | ata_port_pbar_desc(ap, MMIO_BAR, offset, "port"); | |
666 | ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", | |
667 | (unsigned long long)pci_resource_start(pdev, 2 * i), | |
668 | (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) | | |
669 | ATA_PCI_CTL_OFS); | |
4447d351 TH |
670 | } |
671 | ||
672 | hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); | |
1fd7a697 TH |
673 | |
674 | /* Set dma_mask. This devices doesn't support 64bit addressing. */ | |
675 | rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | |
676 | if (rc) { | |
677 | dev_printk(KERN_ERR, &pdev->dev, | |
678 | "32-bit DMA enable failed\n"); | |
24dc5f33 | 679 | return rc; |
1fd7a697 TH |
680 | } |
681 | ||
682 | rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | |
683 | if (rc) { | |
684 | dev_printk(KERN_ERR, &pdev->dev, | |
685 | "32-bit consistent DMA enable failed\n"); | |
24dc5f33 | 686 | return rc; |
1fd7a697 TH |
687 | } |
688 | ||
b7d8629f FT |
689 | /* |
690 | * This controller is braindamaged. dma_boundary is 0xffff | |
691 | * like others but it will lock up the whole machine HARD if | |
692 | * 65536 byte PRD entry is fed. Reduce maximum segment size. | |
693 | */ | |
694 | rc = pci_set_dma_max_seg_size(pdev, 65536 - 512); | |
695 | if (rc) { | |
696 | dev_printk(KERN_ERR, &pdev->dev, | |
697 | "failed to set the maximum segment size.\n"); | |
698 | return rc; | |
699 | } | |
700 | ||
0d5ff566 | 701 | rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl); |
1fd7a697 TH |
702 | if (rc) { |
703 | dev_printk(KERN_ERR, &pdev->dev, | |
704 | "failed to initialize controller\n"); | |
24dc5f33 | 705 | return rc; |
1fd7a697 TH |
706 | } |
707 | ||
708 | pci_set_master(pdev); | |
4447d351 TH |
709 | return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED, |
710 | &inic_sht); | |
1fd7a697 TH |
711 | } |
712 | ||
713 | static const struct pci_device_id inic_pci_tbl[] = { | |
714 | { PCI_VDEVICE(INIT, 0x1622), }, | |
715 | { }, | |
716 | }; | |
717 | ||
718 | static struct pci_driver inic_pci_driver = { | |
719 | .name = DRV_NAME, | |
720 | .id_table = inic_pci_tbl, | |
438ac6d5 | 721 | #ifdef CONFIG_PM |
1fd7a697 TH |
722 | .suspend = ata_pci_device_suspend, |
723 | .resume = inic_pci_device_resume, | |
438ac6d5 | 724 | #endif |
1fd7a697 TH |
725 | .probe = inic_init_one, |
726 | .remove = ata_pci_remove_one, | |
727 | }; | |
728 | ||
729 | static int __init inic_init(void) | |
730 | { | |
731 | return pci_register_driver(&inic_pci_driver); | |
732 | } | |
733 | ||
734 | static void __exit inic_exit(void) | |
735 | { | |
736 | pci_unregister_driver(&inic_pci_driver); | |
737 | } | |
738 | ||
739 | MODULE_AUTHOR("Tejun Heo"); | |
740 | MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); | |
741 | MODULE_LICENSE("GPL v2"); | |
742 | MODULE_DEVICE_TABLE(pci, inic_pci_tbl); | |
743 | MODULE_VERSION(DRV_VERSION); | |
744 | ||
745 | module_init(inic_init); | |
746 | module_exit(inic_exit); |